Shaded Areas Research Articles

Interaction and integration among behaviors of adult Drosophila in nature.

Living in environments whose ecologies vary in periods as short as 24 h is a challenge for animals as Drosophila species that inhabit pear and apple orchards. These orchards have sunny and shady sections. The size and shape of these habitats change daily according to the position of the sun in the sky. Sunny areas are related to dryness and water loss, and shady places have lower temperatures and higher humidity. The presence of heterospecific flies may lead to competition for space and food. In sunny habitats we did not find adult Drosophila. In shady sections we found conspecific groups D. melanogaster, D. simulans, D. immigrans, D. subobscura, and the Chilean endemic D. pavani perched on grasses and herbs at 8-10 cm from fruits that had fallen on the ground. In the fruits, 99% of the adults were females and they were not grouped. The way in which daily changes in the size and shape of shady habitats together with the presence of heterospecific adults influence the selection of places to live is poorly understood in Drosophila. Our experiments show that adults of the five species prefer dark areas. The experimental results show that the odors of each species: i) influence conspecifics to select similar perch sites and decrease mobility, and ii) increase mobility in heterospecific adults and modify their perch site preferences. Attractions between conspecifics, the repulsions between species, and preferences for shaded areas matter in choosing a place to live in the five Drosophila species. These behaviors seem to have evolved as coordinated routines, contributing to the coexistence of the five Drosophila species in the apple and pear orchards examined.

Orientation of tree rows in alley cropping systems matters – The “ShadOT” modelling tool for tree growth and shading effects

Agroforestry systems have received a significant attention in recent years and can be considered as a potential strategy in agricultural production to respond to worsening climatic conditions. The decision-making process for farmers to design and implement agroforestry systems is complex due to time-consuming processes of planting, growing and management of trees, as well as the long-term impacts on the field and its productivity. The shading of the arable land by trees is a core issue and should be reduced through a north-south orientation of the tree rows. However, this orientation is often in conflict with other criteria. In order to consider future shading from different tree row orientations into the design process, the modelling tool “ShadOT” was developed. This tool can simulate tree growth and analyses spatial shading over variable time periods by using only a limited number of parameters. This tool was programmed exclusively with open source software and can therefore be easily extended. It offers an ideal platform for testing different agroforestry designs due to its simple approach and minimal parameterization. Two different designs (north-south and west-east orientation) were tested for a field and differences in the temporal and spatial distribution of shaded areas are presented.•Modelling tool for tree growth and shading effects is presented.•The tool is written in Python programming language, uses only open-source software and requires a limited number of inputs.•Identification of spatial-temporal shading patterns of different alley cropping scenarios.

Effects of tree arrangements of silvopasture system on behaviour and performance of cattle – a systematic review

Abstract This review aimed to provide a critical and systematic evaluation of the scientific literature about the effect of tree arrangements of the silvopasture system on the thermal environment, behaviour, and performance of cattle. We conducted a search using Web of Science and Google Scholar to identify the key literature of the theme. Peer-reviewed published articles written in English, comparing one or more tree arrangements of SPS to treeless pasture or comparing shaded and sunny areas within the SPS, were selected. The resulting manuscripts (n=191) underwent a four-step PRISMA appraisal process. This process resulted in a final sample of 37 articles, which were used for recording metadata, bibliometric analysis, and assessment of the results, using the software R. Of the 37 articles, 20 studies evaluated dairy cattle (behaviour: 14; performance: 7) and 17 evaluated beef cattle (behaviour: 6; performance: 12). The main behaviours evaluated were grazing (95%) and ruminating (90%), while weight gain (89%) was the main performance variable evaluated. The cooccurrence network analysis highlighted that the studies related the animals’ response to improving the thermal environment promoted by silvopasture systems. The main difference among tree arrangements evaluated by the studies was tree density, which ranged from 5 to 800 trees/ha; most studies covered SPS with row of trees (single row, n=16 and multiple rows, n=19). Most studies (n=32) were carried out in Brazil. The evidence of this review showed that regardless of tree arrangement, the silvopasture system improves the thermal environment for cattle, although some effects on behaviour and performance are inconclusive.

Coexistence and Spatial Distribution of Invasive and Sylvatic Container-Breeding Mosquitoes in City–Forest Ecotone within the Brazilian Semi-arid

Aedes species are vectors of the most significant arboviruses in Brazil with the greatest health and economic impact in the country. However, little is known about the factors that influence the distribution of Aedes, as well as other container-breeding mosquitoes, especially on the border between urban and forest environments. Here, we tested the effect of three phytophysiognomies within the city–forest ecotone in the Brazilian semi-arid region on the spatial distribution of vector mosquitoes. We also investigated the effect of rainfall on the spatial distribution and abundance of mosquitoes and described the interspecific interactions between invasive and native mosquito species. Immatures were sampled during the rainy seasons of 2019–2020 (October 2019 to February 2020) and 2020–2021 (November 2020 to February 2021). In each sampled location, 30 ovitraps were installed in shaded areas. There was a predominance of the Aedes mosquitoes, especially Ae. albopictus and Ae. aegypti, while three species of Haemagogus (Hg. spegazzinii, Hg. janthinomys and Hg. leucocelaenus) were rarely found. The sylvatic mosquito Ae. terrens was abundant in areas with lower anthropic influence and during higher rainfall regimes with minimal pluviometric variation. This rainfall was also favorable for the presence of the predatory mosquito larvae Toxorhynchites theobaldi. The abundance of invasive Aedes species showed positive correlations with each other and negative correlations with the sylvatic Ae. terrens. Our results demonstrate that human occupation and the rainfall regime affect the interactions between invasive and sylvatic species of container mosquitoes.

Welfare of dairy cows in mixed feeding systems under two different conditions of confinement: Behavioral, biochemical and physiological indicators

High production pasture-based dairy systems have difficulty meeting cows' nutritional and environmental needs, especially during extreme environmental conditions during summer in temperate zones. The mixed systems combine pasture access with supplementation periods to achieve the maximum use of pastoral conditions and help better meet nutritional requirements. The aim of this study was to determine if the different conditions during confinement (compost barn, CB vs. outdoor soil-bedded, OD) affect behavioral, biochemical and physiological indicators of welfare in dairy cows. Multiparous Holstein cows were randomly assigned to one of two groups for confinement periods: a compost barn (CB, n = 15): consisting of compost bedding, a roofed area, ventilation and sprinklers, and an outdoor soil-bedded area during (OD, n = 15), which had a soil floor and shaded area. The frequency of eating, ruminating, drinking, lying, standing, and walking behavior in confinement was evaluated for three months during summer. Rumination minutes was recorded with collars automatically throughout the day. Blood samples were taken to determine total proteins, albumin, globulins and creatine kinase. The subcutaneous temperature was recorded during December and January (n = 7 per group). During the confinement, the CB cows spent more time lying down (P = 0.001) and ruminating (P = 0.04) than the OD cows. During pasture access, the CB cows spent more time grazing (P = 0.003) and less time ruminating (P < 0.0001) than the OD cows. Furthermore, the CB cows had lower subcutaneous temperature than the OD cows during the day (P < 0.0001). Serum creatine kinase concentrations tended to be higher (approximately 360 % more) in the OD cows than in the CB cows (P = 0.07). Differences in the type of confinement determined behavioral changes during both the confinement and pasture access, demonstrating the adaptability of cows to a varied environment. In conclusion, the different conditions during confinement affected the welfare indicators of the dairy cows in the mixed system during summer, with OD cows experiencing poorer welfare than CB cows, based on behavioral, biochemical and physiological indicators of welfare.

New high performance PV system architecture for mitigation of partial shading effects

Partial shading (PS) is a common phenomenon that significantly affects the performance of photovoltaic (PV) systems. Various techniques such as maximum power tracking (MPPT), PV module interconnection and reconfiguration, and power electronics- based schemes have been used. The performance of these system highly depends on shading patterns. Also, the cost of hardware and control complexity are the other limitations to apply them. The paper presents a new hybrid system that combines conventional interconnected PV array using total cross tied (TCT) with partial power processing converters (PPPC) to enhance power generation from photovoltaic (PV) systems. The paper also highlights the impact of partial shading (PS) on the performance of PV systems, which reduces power output and increases mismatch losses. The severity of these effects depends on the shading area and the PS pattern.The proposed hybrid system offers a cost-effective, easy-to-control solution that can be used to enhance the performance of PV systems and promote their widespread adaptation. The performance of the proposed system has been verified using different PS conditions and compared with series-parallel (SP) and TCT interconnected array. The results demonstrate that the proposed system outperforms the SP and TCT interconnected array under PS conditions, highlighting the effectiveness of the PPPC in improving the efficiency of the PV system.

Negative phototaxis of jumping cocooned parasitoid wasp larvae against short wavelengths and physicochemical properties of the cocoon shell

The parasitoid wasp Bathyplectes anurus (Hymenoptera: Ichneumonidae: Campopleginae) is a successful biocontrol agent against the alfalfa weevil, Hypera postica. This weevil is a serious pest of beneficial fabaceous plants such as alfalfa and Chinese milk vetch. One of the possible reasons for the success of this wasp in hot climates may be the ability of its cocooned larvae to repeatedly jump and roll until they relocate themselves away from detrimental sunlight and heat. It is not yet known which wavelengths of light trigger this avoidance behavior or the microstructure of the cocoon shell that might allow light transmission. Here, the response of the cocooned larvae to different wavelengths, and the microstructure, hardness, and elemental components of the cocoon shell were studied. A population of cocooned larvae were introduced on the boundary line between illuminated and shaded areas with blue, green, red, or near-infrared light-emitting diodes. The cocoons moved away from the blue and green light. The distance from the boundary to the cocoons in the shaded area was longer under these long wavelengths, followed by the red light and shortest under the near-infrared light and nil under darkness. No difference was found in mortality between different wavelengths after three days of illumination. Scanning electron microscope observations of the surface of the cocoon shell revealed that the belt-like central ridge was porous, which likely allows ventilation and light transmission. The surface of the cocoon shell showed a uniform distribution of sulfur, potentially aiding in the capture of green wavelengths. The ridge had twice the thickness of the main body and was 1.9 times harder than the main body. These results may be applied to better understand the individual responses of this biological control agent to modifications to their environment, including light pollution.

Outdoor Thermal Comfort Optimization in a Cold Climate to Mitigate the Level of Urban Heat Island in an Urban Area

Climatic and micro-climatic phenomena such as summer heat waves and Urban Heat Island (UHI) are increasingly endangering the city’s livability and safety. The importance of urban features on the UHI effect encourages us to consider the configuration of urban elements to improve cities’ sustainability and livability. Most solutions are viable when a city redevelops and new areas are built to focus on aspects such as optimum design and the orientation of building masses and streets, which affect thermal comfort. This research looks beyond outdoor thermal comfort studies using UHI data and geoprocessing techniques in Tallinn, Estonia. This study supposes that designing urban canyons with proper orientation helps to mitigate the UHI effect by maximizing outdoor thermal comfort at the pedestrian level during hot summer days. In addition, optimizing the orientation of buildings makes it possible to create shaded and cooler areas for pedestrians, reducing surface temperature, which may create more comfortable and sustainable urban environments with lower energy demands and reduced heat-related health risks. This research aims to generate valuable insights into how urban environments can be designed and configured to improve sustainability, livability, and outdoor thermal comfort for pedestrians. According to the study results, researchers can identify the most effective interventions to achieve these objectives by leveraging UHI data and geoprocessing techniques and using CFD simulations. This evaluation is beneficial in guiding urban planners and architects in proposing mitigation solutions to enhance thermal comfort in cities and creating suitable conditions for approved thermal comfort levels. Results of the study show that in the location used for the survey, Tallinn, Estonia, the orientation of West-East offers the optimum level of comfort regarding thermal comfort and surface temperature in the urban environment.

A Modified Bypass Circuit for Improved Reliability of PV Module Validated With Real-Time Data

Solar Power is a promising way of electricity generation but it comes with a drawback of low conversion efficiency which is caused by several factors, the most prominent being partial shading. Partial shading leads to mismatch of PV cells, resulting in formation of hot spot. This leads to power dissipation and physical damage to PV cells. Consequently, panel’s credibility is called into question. A bypass diode reduces the amount of power dissipated by a shaded cell, but it doesn’t entirely prevent hot spot formation. Moreover, bypass diode doesn’t bypass every small shade as it has a shaded area threshold at and above which it begins to bypass the shaded module. Whereas, the rise in temperature may also be triggered even by a small shaded area, like the area of falling leaves, which further creates reliability issues. A few hot spot mitigation strategies have been devised; however, it still has room for improvement. This paper presents a modified bypass circuit arrangement for reliability enhancement of PV systems and it is evaluated for a 3×1 PV string. A comparative analysis with bypass diode is carried out in an experimental study. The efficacy of the proposed methodology is verified based on four performance metrics, namely reverse voltage, power loss under partial shading, the sensitivity of the bypass circuit, and the temperature of the hot spotted module. The proposed technique ensures sensitivity enhancement of the bypass circuit towards shade effect; thus, enhancing the reliability of PV system.

Double-Ring Shaded-Contact Photovoltaic Cell Designed on Standard CMOS Process

This study presents the design of a novel onchip photovoltaic device structure. The aim of this study is to avoid shading loss using a double ring structure. The proposed structure forms all contacts under shaded area; therefore, it is free from optical losses due to electrode shading. In addition, this design enhances integration by utilizing the photovoltaic cell space under the shading metals. This space can be used for interconnections or capacitors. The results indicate that the proposed structure significantly improves cell performance by avoiding light shading loss with the shaded contacts. It was observed that the cell efficiency improved by approximately 0.5% <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><i>abs</i></sub> when compared with the conventional structure, indicating that this is the best performance among several on-chip photovoltaic cell devices.

Hand pollination under shade trees triples cocoa yield in Brazil’s agroforests

Agricultural diversification can enhance climate resilience, biodiversity conservation, and livelihood in global farming systems. Diverse agroforestry systems with cocoa have been shown to provide all these benefits, but the often-lower yields compared to monocultures limit agroforestry adoption by smallholder farmers. Cocoa yield is pollination-limited, and here, we quantified the effect of hand pollination in cocoa on fruit set, fruit abortion or cherelle wilt, pest and diseases, and number of mature fruits. Experiments were conducted in Bahia, Brazil, along a shade gradient from low [10–30%] to high [70–100%] canopy cover and with cocoa trees grafted with high-yielding varieties. We found on average 331% fruit set, and 300% mature fruit increase (i.e. ripe pods) per tree by enhancing pollination by hand as little as 10% of the flowers/tree, compared to the control (i.e. with only natural pollination). Fruit set, fruit losses, and mature fruit development linked to hand pollination was higher in low compared to highly shaded cocoa areas. We found 31% higher fruit set and 37% higher number of mature fruits in grafted than un-grafted trees. Further, when comparing efforts invested in hand pollination, minimum labor (∼5 min/tree to pollinate 10–30% of the flowers/tree) led to a 871% fruit set and a 750% mature fruit increase under low canopy cover, and intermediate labor (∼15 min/tree to pollinate 40–60% flowers/tree) to a 629% fruit set under high canopy cover. As ∼5–15 min/tree hand pollination can substantially enhance fruit set and number of mature fruits in low as well as high shade management, we recommend performing hand pollination particularly in agroforests under 40–50% canopy cover to create win-win opportunities for high productivity and climate resilience. Future research should focus on the wide range of agroforestry, tree grafting and innovation strategies in all major production regions to capture the long-term variability of hand pollination as a basis to scale-up hand pollination for sustainable cocoa production globally.

Human thermo-physiological comfort assessment in Lisbon by local climate zones on very hot summer days

Extreme heat is a current and future issue on urban areas, with negative impacts on health and quality of life (increasing morbidity and mortality rates). This paper analyses day (12:00–15:00 h) and nighttime (00:00–03:00 h) thermo-physiological comfort (TC) conditions by Local Climate Zones (LCZ) in Lisbon during a particular Local Weather Type (LWT), very hot summer days. For this, 13 different microscale sample areas were chosen covering urban and non-urban land cover classes (LCZs 1–3, 4–6, 8, 9, A and B). Universal Thermal Climate Index (UTCI) and Mean Radiant Temperature (MRT) were modeled on SkyHelios software for 163 days between 2008 and 2014. Results show that during the day all urban LCZ samples depict the same average TC conditions (average UTCI of 34°C—strong heat stress) and densely wooded areas are 2°C cooler (average UTCI of 32°C—moderate heat stress). However, compact areas (LCZs 1–3) with low sky view factor and some vegetation (street trees) display lower percentages of area with higher thermo-physiological discomfort (TD) levels (83% with strong heat stress against 98% in LCZs 8 and 9 and 100% in LCZs 4–6). When considering the hottest days (air temperatures equal or above 35°C—75th percentile), the moderate heat stress class disappears in all samples and the very strong heat stress class appears only on urban areas, occupying between 12% and 16% on LCZs 1–3, 10%–22% on LCZs 4–6, 16%–22% on LCZs 8 and 9 on LCZ 9. During the nighttime period all samples show no thermal stress, favoring nocturnal physiological recovery. TC conditions in Lisbon are strongly influenced by solar radiation and wind, which explains the need to increase the shading area, preferably by trees, and to promote and preserve ventilation paths.

New Method for Fine Calculation of Bridge Temperature Field Based on BIM Solar Radiation Analysis

Fine calculation of bridge temperature fields is significant for accurately evaluating thermal actions in bridge structures. Determining thermal loads on bridge surfaces caused by solar radiation is the most challenging part of the numerical thermal analysis because the sunlit and shaded areas on bridge surfaces change continuously with the sun’s rotation. Existing methods have low accuracy in determining thermal loads and cannot be applied to complex bridges. This study presents a new method for calculating temperature fields based on the advantages of building information modeling (BIM) technology in solar radiation analysis (SRA) and information sharing. This method starts with obtaining an accurate hourly insolation distribution on bridge surfaces through SRA implemented in a BIM system. Then, a Python script seamlessly maps the insolation information to finite element surfaces as thermal loads. This paper details the new method’s implementation steps and technical details, and a practical application on a concrete box girder demonstrates its applicability and effectiveness. Compared with previous methods, the proposed method has significant advantages, such as a more accurate calculation for solar radiation, a lower technical threshold, a higher degree of automation, less computational time, and easier finite element modeling.

Development of a GIS-based walking route planner with integrated comfort walkability parameters

Walking is a simple physical activity that is available to almost everyone and effective in reducing pollution, saving resources, and enhancing the general health of the population. Previous research has revealed the need to produce a WI that takes into account real-time comfort conditions. The objective of this study was to design a GIS-based algorithm that automated real time and customized WI computation and proposed a comfortable walking route using these inputs. Two comfort factors were considered; shaded areas and temperature. To this end, we devised a novel method for projecting shadows on the ground and a new way of creating a network of sidewalk routes. We designed an algorithm that successfully computed WI values which took the user’s comfort preferences into account. These values were then used to create the most comfortable route for the user to take along the sidewalks, in line with real-time weather conditions. Key findings unfold in two directions; firstly, GIS functions are enriched by the methods developed for creating a pedestrian network along sidewalks and road crossings, and for calculating the shadows cast by adjacent buildings. Secondly, the proposed algorithm constitutes a significant step forward in the development of a route planner that incorporates personalized walking comfort parameters based on real-time data. This in turn could potentially increase the frequency and duration of walks, thereby improving the general health of the population. Validation was based on an assessment of the accuracy of the model in calculating shadows and on the analysis of the routes calculated under different conditions.

Microbial recolonization of artificial and natural stone artworks after cleaning and coating treatments

Historical stone artworks are susceptible to damage in many environments. Biodeterioration caused by lichens and biofilm-forming microorganisms on these artworks has gained growing attention in the field of cultural heritage conservation. The current approach is focused on planned removal of lithobionts whenever they cause objective damage and/or structural impairments to the substrate. Cleaning may sometimes be followed by the application of organic and/or inorganic products for protection and consolidation of the artworks. The lithobiontic recolonization after cleaning and coating treatments is considered as one of the most challenging subjects nowadays. It is expected to occur in outdoor conditions, particularly on porous substrates, in shaded areas, and in areas that remain moist over time. Two aspects connected to this topic are the recolonization of surfaces after removal of biofilms and lichens, and the recolonization of cleaned surfaces treated with consolidants and/or water repellents. This paper reviews the scientific advances of the last two decades on i) recolonization of artworks, and ii) interaction between synthetic polymers and lithobionts.

Investigation of heat stress on urban roadways for commuting children and mitigation strategies from the perspective of urban design

Rapid urbanization and global warming have triggered frequent heat waves that pose a threat to human survival, with a marked increase in childhood morbidity. While previous studies have explored the thermal environment of children's public activity places, only limited studies have focused on the commute of school children, which is a regular activity causing potential risk of heat stress. From an urban design perspective, this study systematically investigated the influence of building shade, road orientation and tree species on the thermal environment of commuting roads. The simulation results indicated that, regarding the reduction of road heat stress, the building shade has a greater impact that can reduce the mean radiant temperature by 3.22 °C to 21.25 °C, compared to the effect of tree shade (0.02–6.04 °C). Furthermore, planting street trees in a flexible manner to add building shade areas can enhance thermal safety. For road orientations, increasing shade areas of north-south road generates more benefits in heat stress mitigation (in the northern hemisphere). Finally, from the perspective of urban design/management and school children, a set of heat stress mitigation strategies are proposed to promote the thermal safety of school children and stimulate the development of a sustainable and healthy urban environment.

산업재해 감지 스마트 디바이스 설계 방안 및 성능평가를 위한 지표 도출에 관한 연구

There are various ICT technologies continuously being developed to reduce damage by industrial accidents. And research is being conducted to minimize damage in case of industrial accidents by utilizing sensors, IoT, big data, machine learning and artificial intelligence. In this paper, we propose a design method for a smart device capable of multilateral communication between devices and smart repeater in the communication shaded Areas such as closed areas of industrial sites, mountains, oceans, and coal mines. The proposed device collects worker’s information such as worker location and movement speed, and environmental information such as terrain, wind direction, temperature, and humidity, and secures a safe distance between workers to warn in case of a dangerous situation and is designed to be attached to a helmet. For this, we proposed functional requirements for smart devices and design methods for implementing each requirement using sensors and modules in smart device. And we derived evaluation items for performance evaluation of the smart device and proposed an evaluation environment for performance evaluation in mountainous area.

Estimating minimum post-mortem interval in a Nigerian murder case using Chrysomya megacephala (Fabricius, 1794) (Diptera: Caliphoridae): The first use of forensic entomology

Introduction: This paper presents the first application of forensic entomology in a murder investigation in Nigeria involving the remains of a 54-years victim, on January 9th, 2019 in a shaded wooded area in advanced decomposition, with no clear indication of the time of death. Objectives: To estimate the minimum post-mortem interval of a 54-year-old corpse recovered in the advanced decomposition stage using the blowfly Chrysomya megacephala and the Advance-Degree-day (ADD) method. Results: An autopsy report revealed multiple wounds to the forehead including a bullet hole. Dead embalmed dead maggots recovered from the body were identified as C. megacephala, and an accumulated degree-day model was used to estimate the minimum post-mortem interval. The findings revealed that the recovered larvae were still within the third-instar stage and had accumulated thermal energy between 58 hours (= 1.6 days, equivalent to 38.7 ADD) and 102 hours (= 2.8 days, equivalent to 68.0 ADD), suggesting that the body may have been exposed to insect activity between January 1st and 9th January 2019 after expanding the range to cater for some uncertainties. Conclusion: In this Nigerian murder case, forensic entomology used the calliphorid species C. megacephala to estimate the minPMI to be between 2 and 9 days before the body was discovered, which translates to 1st - 9th January 2019 after consideration of some uncertainties and limitations. This confirmed the crucial role that insects play in providing valuable evidence to complement forensic pathological findings in homicides when conventional methods failed. Notwithstanding difficulties with employing insect evidence in forensic investigations in Nigeria, the application of this modern forensic technique has the potential to aid in the resolution of many unsolved murder cases and expedite the delivery of justice. The ability of law enforcement agencies in Nigeria to use the potential of insects in criminal investigations can be improved through collaborations and training with professionals from diverse professions.

Capturing Small-Scale Surface Temperature Variation across Diverse Urban Land Uses with a Small Unmanned Aerial Vehicle

Urbanization increases the urban land surface temperature (LST), challenging society and the environment. This study measured the LST of diverse land uses (LU) in Dallas–Fort Worth (DFW) using a high-resolution (8 cm) thermal infrared sensor onboard a small, unmanned aerial vehicle (UAV). LUs included park (PA), industrial (IA), residential low-cost (RLC), and residential high-cost (RHC) areas. LST was collected by the UAV at different times on eight nonconsecutive days. UAV-collected LST was compared with that from Landsat 8-9 and in situ measurements. RHC reported the highest mean LST, and PA showed the lowest mean LST. Dark-colored asphalt shingle roofs in RHC had the highest mean LST range at 35.67 °C. Lower LST was measured in shaded areas and under thick green cover, whereas areas with thin green cover occasionally reported higher LST than pavements. The micro-urban heat island (MUHI) was calculated between LUs and within land cover types (roof, pavement, green, and water). The MUHI varied from 4.83 °C to 15.85 °C between LUs and 0.2 °C to 23.5 °C within LUs for the less than 1 km2 study area. While the UAV thermal sensor and Landsat demonstrated a similar trend of LST variation, the UAV sensor reported more intense MUHI. An average percent bias (PBIAS) of 5.1% was calculated between the UAV sensor and in situ measurements. This study helps inform the urban design process by demonstrating how land use decisions impact LST locally and provides valuable insight for studies concerned with fine-scale urban LST variability.

Animal welfare and effects of per-female stress on male and cattle reproduction-A review.

Thermal stress causes severe effects on the wellbeing and reproduction of cattle, including changes in oogenesis and spermatogenesis, generating great concerns, which last for decades. In cattle, the occurrence of thermal stress is associated with a reduction in the production of spermatozoids and ovarian follicles, in addition to the increase of major and minor defects in gametes or in their intermediate stages. In bovine females able to reproduce, a reduction in the rate of estrus manifestation and an increase in embryonic mortality has been observed. Therefore, keeping animals on good welfare conditions, with water supply and in shaded areas can favor the improvement of different reproductive parameters. For all this, the present study aimed to gather, synthesize and argue recent studies related to animal welfare, focusing on the effects of thermal stress on the reproduction of cattle, aiming to support possible strategies to mitigate the harmful effects of thermal stress in this species.