Sewage Samples Research Articles

The Immunological and Epidemiological Effectiveness of Pediatric Single-Dose Vaccination against Hepatitis A 9 to 11 Years after Its Implementation in the Tyva Republic, the Russian Federation.

Since 2012, universal single-dose HAV vaccination in children aged 3 years and older has been implemented in the Tyva Republic, a region of the Russian Federation. The aim of this prospective non-interventional observational single-center study was to determine the immunological and epidemiological effectiveness of single-dose vaccination against hepatitis A 9 to 11 years after its implementation. The anti-HAV IgG antibodies were determined in two independent cohorts of children who were vaccinated with a single dose of monovalent pediatric inactivated vaccine (HAVRIX® 720 EU) in Tyva in 2012 and recruited 9 years (Year 9 Cohort) and 11 years (Year 11 Cohort) after immunization. The seroprotection rates defined as anti-HAV antibody concentrations ≥10 mIU/mL reached 99.4% (95% CI: 98.2-99.9% [501/504]) in the Year 9 Cohort, but decreased significantly to 75.4% (95% CI: 73.0-77.6% [1006/1335]) in the Year 11 Cohort (p < 0.0001). The anti-HAV geometric mean concentrations decreased from 1446.3 mIU/mL (95% CI: 1347.1-1545.4 mIU/mL) in the Year 9 Cohort to 282.6 mIU/mL (95% CI: 203.8-360.8, p < 0.0001) in the Year 11 Cohort. The HAV vaccination program resulted in zero rates of hepatitis A incidence in the Tyva Republic since 2016. However, the limited monitoring of HAV RNA in sewage and environmental samples demonstrated the ongoing circulation of both the regional epidemic strain of HAV genotype IA and another genotype IA strain imported recently from other parts of the Russian Federation, probably due to subclinical infections in non-vaccinated children under 3 years of age. Taken together, these data indicate the effectiveness of the single-dose HAV vaccination strategy but suggest the need to expand the vaccination program to include children aged 12 months and older to achieve maximum effectiveness.

Nanoparticle Assisted Fabric Phase Sorptive Extraction for Azo Dye Determination in the Industrial Sewage.

Currently, one of the significant environmental problems is the presence of azo dye materials in water sources. In this study, for the first time, a fast and sensitive sample preparation approach using nanoparticle-assisted fabric phase sorptive extraction (NFPSE) followed by high-performance liquid chromatography was examined to remove some azo dyes such as methyl red and sunset yellow from aqueous solutions. Primarily, the significance of several parameters affecting NFPSE, such as fabric type, the kind of sorbent, the number of contacts with sol-gel and the time of contact, was investigated. In addition, experiments were performed to determine the effect of different adsorption parameters, such as sample volume, adsorption time, adsorbent value, desorption time, ionic strength and pH. It was found that the calibration curve was linear within two ranges of concentrations (0.05-0.1 and 0.5-15ng/L for methyl red; 0.05-0.5 and 0.5-15ng/L for sunset yellow) with correlation coefficients better than 0.9683. The limit of detection was 0.014ng/L for methyl red and 0.015ng/L for sunset yellow. Repeatability Relative Standard Deviation (RSD) with three replicated experiments was 1.5-10% for methyl red and 2.5-5.8% for sunset yellow. Relative recovery percentages of 88-96% for methyl red and 62-92% for sunset yellow were obtained in the samples. Moreover, the results have shown that acceptable accuracy, precision and linearity make the "fabric phase sorptive extraction" a proper method for the determination of dyes from industrial sewage samples.

Bacteriophage vB_kpnS-Kpn15: Unveiling its potential triumph against extended-spectrum beta-lactamase-producing Klebsiella pneumoniae - Unraveling efficacy through innovative animal alternate models

Aim –To isolate bacteriophages targeting extended-spectrum beta-lactamase-producing K. pneumoniae and evaluate their effectiveness across diverse models, incorporating innovative alternatives in animal testing. Methods and resultsvB_kpnS-Kpn15 was isolated from sewage sample from Thane district. It produced a clear plaques on K. pneumoniae ATCC 700603. It has a flexible, non-contractile long tail and an icosahedral head and the Siphoviridae family of viruses in the order Caudovirales matched all of its structural criteria. Sequencing of vB_kpnS-Kpn15 revealed a 48,404 bp genome. The vB_KpnS-Kpn15 genome was found to contain 50 hypothetical proteins, of which 16 were found to possess different functions. The vB_KpnS-Kpn15 was also found to possess enzymes for its DNA synthesis. It was found to be lytic for the planktonic cells of K. pneumoniae and bactericidal for up to 48 h and potentially affected established K. pneumoniae biofilms. It demonstrated a broad host range and caused lytic zones on about 46 % of K. pneumoniae multi-drug resistant strains. In an in vitro wound and burn infection model, phage vB_kpnS-Kpn15 in combination with other phages resulted in successful cell proliferation and wound healing. Based on vB_kpnS-Kpn15's lytic properties, it can be incorporated in a bacteriophage cocktail to combat ESBL strains. ConclusionsThe phages isolated during this research are better candidates for phage therapy, and therefore provide new and exciting options for the successful control of antibiotic-resistant bacterial infections in the future. The utilization of animal alternative models in this study elucidates cellular proliferation and migration, underscoring its significance in screening novel drugs with potential applications in the treatment of wound and burn infections. Significance and impact of the researchThe findings of this research have implications for the creation of innovative, promising strategies to treat ESBL K. pneumoniae infections.

Development and evaluation of a colorimetric LAMP based-assay targeting the Bacteroides HF183 marker for tracking sewage pollution in environmental waters

Surface waters are vulnerable to contamination by human and animal feces, posing risks to human health due to potential exposure to enteric pathogens. This research developed a colorimetric loop-mediated isothermal amplification (cLAMP) assay to detect sewage associated Bacteroides dorei HF183/BacR287 (HF183) marker in wastewater and environmental water samples. The host sensitivity and host specificity of the assay were evaluated, and their performance was compared to the Bacteroides HF183 qPCR assay using control materials (gBlocks), environmental water samples seeded with untreated sewage, and ambient environmental water samples. In serial dilutions of control materials, qPCR produced quantifiable data across all dilutions, while cLAMP detected the marker down to 0.001 pg/µL of control materials, which was two orders of magnitude less sensitive than qPCR. All untreated sewage samples (n = 12) tested positive for HF183 by both the qPCR and cLAMP assays, demonstrating a host sensitivity value of 1.00 (maximum value of 1.00). The host specificity by analysing 70 non-human fecal nucleic acid samples revealed cLAMP's specificity value of 0.81 compared to qPCR's 0.64. When testing sewage-seeded environmental water samples, both methods detected HF183 for the lowest amount of sewage, indicating similar detection sensitivity. The application of cLAMP for tracking sewage pollution in environmental waters showed promising results, with moderate agreement between cLAMP and qPCR (κ = 0.510). However, cLAMP occasionally missed detections compared to qPCR, particularly in low-concentration samples. Overall, the cLAMP HF183 assay demonstrated promising potential as a rapid and sensitive method for detecting sewage pollution, offering a viable alternative to qPCR in certain environmental monitoring scenarios.

Discovery of Vibrio cholerae in Urban Sewage in Copenhagen, Denmark

We report the discovery of a persistent presence of Vibrio cholerae at very low abundance in the inlet of a single wastewater treatment plant in Copenhagen, Denmark at least since 2015. Remarkably, no environmental or locally transmitted clinical case of V. cholerae has been reported in Denmark for more than 100 years. We, however, have recovered a near-complete genome out of 115 metagenomic sewage samples taken over the past 8 years, despite the extremely low relative abundance of one V. cholerae read out of 500,000 sequenced reads. Due to the very low relative abundance, routine screening of the individual samples did not reveal V. cholerae. The recovered genome lacks the gene responsible for cholerae toxin production, but although this strain may not pose an immediate public health risk, our finding illustrates the importance, challenges, and effectiveness of wastewater-based pathogen surveillance.

Precautionary findings on the utilization of FilmArray® to detect human astroviruses in fecal and sewage samples

The FilmArray® Gastrointestinal (GI) Panel is a modern, sensitive, and comprehensive stool testing technique for identifying common gastrointestinal pathogens, including viruses, bacteria, and parasites. Its increasing demand is due to ease of operation and automation. Pathogens, particularly viruses, undergo constant genetic evolution. For instance, human astrovirus (HAstV), which causes gastroenteritis in children, the elderly, and immune-compromised individuals, can be identified by the GI Panel. HAstV has evolved into several clades, including the classic (HAstV1-8), novel Melbourne (MLB1-3), and Virginia (VA1-5) clades. This study investigated whether the GI Panel accurately detects all HAstV clades. A total of 12 stool and three sewage water (SW) samples were selected post-confirmation of distinct HAstV strains using conventional RT-PCR and sequence-based genotyping for reassessment by the GI Panel. The GI Panel accurately detected the classic HAstV in stool and SW samples. However, our results confirm the GI Panel's inability to detect the novel MLB (MLB1-3) and VA (VA2) clades in fecal samples, raising the possibility of false-negative results in HAstV testing. Although the GI Panel is useful for identifying a variety of gastrointestinal pathogens in stool and SW samples in a single test, our findings highlight the need to exercise caution when interpreting HAstV results from the GI Panel.

Wastewater multiplex PCR amplicon sequencing revealed community transmission of SARS-CoV-2 lineages during the outbreak of infection in Chinese Mainland

During the COVID-19, wastewater-based epidemiology (WBE) has become a powerful epidemic surveillance tool widely used worldwide. However, the development and application of this technology in Chinese Mainland are relatively lagging. Herein, we for the first time monitored the community circulation of SARS-CoV-2 lineages using WBE methods in Chinese Mainland. During the peak period of infection outbreak at the end of 2022, six precious sewage samples were collected from the manhole in the student dormitory area on Wangjiang Campus of Sichuan University. RT-qPCR revealed that the six sewage samples were all positive for SARS-CoV-2 RNA. Multiplex PCR amplicon sequencing of the sewage samples reflected the local transmission of SARS-CoV-2 variants. The results of two deconvolution methods indicate that the main virus lineages have clear evolutionary genetic correlations. Furthermore, the sampling time is consistent with the timeline of concern for these virus lineages, as well as the timeline of uploading the nucleic acid sequences from the corresponding lineages in Sichuan to the database. These results demonstrate the reliability of the sewage sequencing results. Multiplex PCR amplicon sequencing is by far the most powerful analytical tool of WBE, enabling quantitative detection of virus lineages transmission and evolution at the community level.

Isolation, characterization, and application of a lytic bacteriophage SSP49 to control Staphylococcus aureus contamination on baby spinach leaves

Staphylococcus aureus, a major foodborne pathogen, is frequently detected in fresh produce. It often causes food poisoning accompanied by abdominal pain, diarrhea, and vomiting. Additionally, the abuse of antibiotics to control S. aureus has resulted in the emergence of antibiotics-resistant bacteria, such as methicillin resistant S. aureus. Therefore, bacteriophage, a natural antimicrobial agent, has been suggested as an alternative to antibiotics. In this study, a lytic phage SSP49 that specifically infects S. aureus was isolated from a sewage sample, and its morphological, biological, and genetic characteristics were determined. We found that phage SSP49 belongs to the Straboviridae family (Caudoviricetes class) and maintained host growth inhibition for 30 h in vitro. In addition, it showed high host specificity and a broad host range against various S. aureus strains. Receptor analysis revealed that phage SSP49 utilized cell wall teichoic acid as a host receptor. Whole genome sequencing revealed that the genome size of SSP49 was 137,283 bp and it contained 191 open reading frames. The genome of phage SSP49 did not contain genes related to lysogen formation, bacterial toxicity, and antibiotic resistance, suggesting its safety in food application. The activity of phage SSP49 was considerably stable under various high temperature and pH conditions. Furthermore, phage SSP49 effectively inhibited S. aureus growth on baby spinach leaves both at 4 °C and 25 °C while maintaining the numbers of active phage during treatments (reductions of 1.2 and 2.1 log CFU/cm2, respectively). Thus, this study demonstrated the potential of phage SSP49 as an alternative natural biocontrol agent against S. aureus contamination in fresh produce.

Targeted whole-genome recovery of single viral species in a complex environmental sample

Characterizing unknown viruses is essential for understanding viral ecology and preparing against viral outbreaks. Recovering complete genome sequences from environmental samples remains computationally challenging using metagenomics, especially for low-abundance species with uneven coverage. We present an experimental method for reliably recovering complete viral genomes from complex environmental samples. Individual genomes are encapsulated into droplets and amplified using multiple displacement amplification. A unique gene detection assay, which employs an RNA-based probe and an exonuclease, selectively identifies droplets containing the target viral genome. Labeled droplets are sorted using a microfluidic sorter, and genomes are extracted for sequencing. We demonstrate this method's efficacy by spiking two known viral genomes, Simian virus 40 (SV40, 5,243 bp) and Human Adenovirus 5 (HAd5, 35,938 bp), into a sewage sample with a final abundance in the droplets of around 0.1% and 0.015%, respectively. We achieve 100% recovery of the complete sequence of the spiked-in SV40 genome with uniform coverage distribution. For the larger HAd5 genome, we cover approximately 99.4% of its sequence. Notably, genome recovery is achieved with as few as one sorted droplet, which enables the recovery of any desired genomes in complex environmental samples, regardless of their abundance. This method enables single-genome whole-genome amplification and targeting characterizations of rare viral species and will facilitate our ability to access the mutational profile in single-virus genomes and contribute to an improved understanding of viral ecology.

Insight into the mechanism of adsorption and release of 11-nor-9-carboxy-Δ9-tetrahydrocannabinol in sewage by modeling regional suspended particles for evaluation of the influence on monitoring of cannabis illicit abuse

The adsorption of 11-nor-9-carboxy-∆9-tetrahydrocannabinol (THC-COOH) by the suspended particles in sewage makes it fail to accurately monitor cannabis abuse. In this work, the model sewage sample was prepared through equivalent mixing the sewage from 10 different sewage treatment plants in Guangdong province of China and used as a comprehensive representative for investigating the adsorption and release behavior of THC-COOH on the suspended particles under different temperature and pH. The solid-liquid distribution of THC-COOH in sewage depended strongly on the adsorption and release properties which were susceptible to the temperature and pH, specially adjusting pH to 11.0 could release more than 90 % of THC-COOH from the suspended particles. By means of the kinetics models, pseudo-second-order kinetic and Weber-Morris models revealed the mechanism of adsorption and release of THC-COOH in sewage that was a relatively reversible and controllable process with multiple interactions, and then it was further confirmed by the validation experiment in a variety of actual sewage samples. According to the suggested pH, the modification of the existing detection protocol prior to high performance liquid chromatography-tandem triple quadrupole mass spectrometry (HPLC-TQ-MS/MS), was successfully applied to determination of THC-COOH in the stimulated positive samples, and the recoveries and RSDs were respectively 95.48–99.79 % and 4.0–5.6 %. The finding could greatly help improving the accuracy of not only the detection of THC-COOH in sewage but also the estimation data of the consumption level of cannabis in the related regions.

Phosphate Removal from Sewage by Chemical Precipitation and its Effect on Other Characteristics

It is observed that Phosphate is seen in the sewage samples in the industry and reduction of it is required. Removing Phosphate (P) from domestic wastewater is largely done to reduce the risk of eutrophication in any water that the wastewater will be released into. Phosphorous being a nutrient can be recovered from the waste water and put to good use like in fertilizers. There are different technologies that are being used to achieve the removal of P-content from sewage like – Physical, Chemical, Biological and Ion Exchange amongst others. The main objective of our research study is to find out suitable chemical for removal of Phosphate from sewage using chemical precipitation as removal mechanism. In the current study, selection of suitable chemical for chemical precipitation amongst Alum and FeCl3 is done to reduce the P-content in the sewage up to 0.2 mg/L. Using lab trials, dosage for the same is calculated and accordingly the on-field trials were carried out to check the efficacy of the method. The study also included the study the influence of chemical addition onto the various characteristics of the sewage. The on-field trials gave an idea about the working of chemical precipitation in the current system and how it affects entire wastewater treatment system.

Isolation and chemical immobilization of E. coli‐specific bacteriophage with NH2‐MIL‐101(Fe) MOF, a high photoluminescence rod‐shaped microcrystals for low‐level bacteria detection

As concern raised by the World Health Organization (WHO) of antibiotic‐resistant and bio‐defensive bacteria, a metal–organic framework (MOF) based optical biosensor came into consideration for precise, quick, and sensitive detection of Escherichia coli (E. coli) (ATCC 10799) using bacteriophage as a bio‐recognition element. In the present study, amine‐functionalized Fe‐based MOF, i.e., NH2‐MIL‐101(Fe), was synthesized by the solvothermal method (approx. 531–1106 nm in size and 20 mV zeta potentials by DLS) and further characterized by SEM, XRD, ATR‐FTIR, UV–VIS, and photoluminescent (PL) spectroscopy. The lytic bacteriophage was isolated from a sewage sample, purified, and concentrated using the ultra‐centrifugation method and achieved a high titer of 7.3 × 1012 PFU/ml. The concentration, stability, and accessible receptor binding domains (RBDs) of the biorecognition element for binding with their analytes play an important role in developing sensitive and specific biosensor systems. To fulfill the mentioned criteria, optimized glutaraldehyde concentration was estimated at 0.25%, at 30 °C for conjugating maximum bacteriophage titer of 8.6 × 105 PFU/ml for each 1 mg amine functionalized iron‐based MOF. The synthesized detection probe has shown excellent photoluminescence and antibacterial activity and achieved a detection limit of 652 CFU/ml over a bacterial detection concentration range from 5.78 × 101 to 5.78 × 106 CFU/ml for E. coli with 10–12 min of response time, high specificity, and long‐term stability even at room temperature. Therefore, it can be inferred that this MOF‐based strategy can be helpful in the specific and sensitive detection of various bacterial pathogens using bacteriophage as a bio‐recognition element.

A MELET- and IFE-based UV–visible luminescent ratiometric probe for quantization of mercury(II) and nitrofurantoin in environmental sewage

A novel fluorimetric ratiometric probe of green and eco-friendily nitrogen-enriched, oxygen-doped carbon nanodots (Cnanodots) was prepared for the quantitative analysis of mercury(II) (HgII) and nitrofurantoin (Nit) in the environmental sewage. The Cnanodots exhibits dual-emission peaks respectively at 345 and 445 nm under 285 nm excitation, with excitation-independent properties. Unexpectedly, this Cnanodots displays two obvious ratiometric responses to HgII and Nit through decreasing the signal at 345 nm and remaining invariable at 445 nm. Experimental results confirm that the highly sensitive analysis of HgII and Nit are achieved respectively based on matching energy-level electron transfer and inner filter effect mechanisms. The fluorescence (FL) ratiometric intensity of [FL345nm/FL445nm] expresses a good linear relationship with the concentration of HgII in the scope of 0.01–20 μM, while the logarithm of [Log(FL0345nm-FL345nm)] on the quenching degree of the probe by Nit also shows a good linear correlation within the range of 0.01–100 μM. The detection limits were calculated to be 4.14 nM for HgII, and 7.84 nM for Nit. Moreover, recovery experiments of Cnanodots for HgII and Nit sensing in real sewage samples obtained satisfactory results, comfirming the feasibility of practical application.

N-Nitrosodimethylamine formation from anthropogenic nitrogenous compounds during preozonation and post-chloramination with characteristic low treatment dose.

One effective option to minimize N-nitrosodimethylamine (NDMA) in finished drinking water is to identify and control its precursors. However, previous works to identify significant precursors use formation potential (FP) tests using high doses to assure the maximum NDMA formation rather than the NDMA formation in finished waters. In this study, we applied characteristic low treatment doses of ozone (O3)-to-dissolved organic carbon (DOC) of target compounds of 0.8mg/mg and NH2Cl of 2.5 ± 0.2mg Cl2/L to evaluate the NDMAFP yields of organic compounds bearing N,N-dimethylamine (DMA) and N,N-dimethylhydrazine (DMH) during preozonation and post-chloramination. The results in pH-buffered Milli-Q water showed a significant decrease from ≤ 52% to non-detectable levels in the O3-NDMAFP yields of O3-reactive precursors (i.e., DMH-like compounds) after preozonation and post-chloramination. Similarly, a significant decrease from 0.5 to 12% to nonquantifiable levels was observed for the NH2Cl-NDMAFP yields of NH2Cl-reactive precursors; however, the NH2Cl-NDMAFP yields of N,N-dimethylbenzylamine (DMBzA)-like compounds only decreased from ~ 110 to ≤ 43%, suggesting that these compounds could contribute to NH2Cl-NDMAFPs even after preozonation. The effect of the matrix in sewage-effluent and lake water samples varied and was specific for precursors; for example, the O3-NDMAFP yield of 1,1,1',1'-tetramethyl-4,4'-(methylene-di-p-phenylene) disemicarbazide (TMDS), an important O3-reactive NDMA precursor, did not significantly decrease when tested in sewage-effluent samples. Based on the previous occurrence concentration of TMDS in sewage samples, we estimated an NDMAFP of ~ 315 ng/L. This estimate exceeds the guidance concentrations of NDMA (3-100ng/L), highlighting the importance of TMDS and its related compounds for NDMA formation.

Assessment of crAssphage as a biological variable for SARS-CoV-2 data normalization in wastewater surveillance.

This study aimed to assess the use of cross-assembled phage (crAssphage) as an endogenous control employing a multivariate normalization analysis and its application as a severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) data normalizer. A total of 188 twelve-hour composite raw sewage samples were obtained from eight wastewater treatment plants (WWTP) during a 1-year monitoring period. Employing the N1 and N2 target regions, SARS-CoV-2 RNA was detected in 94% (177) and 90% (170) of the samples, respectively, with a global median of 5 log10 genomic copies per liter (GC l-1). CrAssphage was detected in 100% of the samples, ranging from 8.29 to 10.43 log10 GC l-1, with a median of 9.46±0.40 log10 GC l-1, presenting both spatial and temporal variabilities. Although SARS-CoV-2 data normalization employing crAssphage revealed a correlation with clinical cases occurring during the study period, crAssphage normalization by the flow per capita per day of each WWTP increased this correlation, corroborating the importance of normalizing wastewater surveillance data in disease trend monitoring.

The effect of sewage source on HF183 risk-based threshold estimation for recreational water quality management

Host-associated fecal indicator measurements can be coupled with quantitative microbial risk assessment to develop risk-based thresholds for recreational use of potential sewage-contaminated waters. These assessments require information on the relative concentrations of indicators and pathogens in discharged sewage, typically based on data collected from wastewater treatment plant influent samples. However, most untreated sewage releases occur from within the collection system itself (i.e. compromised sewer laterals, compromised gravity and force mains, sanitary sewer overflows), where these relationships may differ. This study therefore analyzed the concentrations of a selected reference pathogen (norovirus) and fecal indicator (HF183) in sewage samples from upper and lower segments of gravity sewage collection systems, wastewater pumpstations, and the influent and effluent of treatment plants, to characterize variability in their relative concentrations. Norovirus detection rates were lower and more variable in upper collection system samples due to the smaller population represented; whereas, HF183 was routinely detected at all sites with higher concentrations in the collection system compared to treatment plant influent, resulting in variable comparative relationships across sample locations (types). Mean HF183:NoV ratios ranged from 1.0 × 105 for sewer lateral samples to 7 × 10° for force main samples. Results were used to develop risk-based thresholds for HF183 based on estimated recreational exposure to norovirus following a release from each potential sewage source, with higher thresholds for treatment facility influent compared to forced mains, or effluent. Consequently, this approach can allow for the rapid application of potential risk-based thresholds for recreational water quality applications based on different types of sewage discharge events.

Molecular Characterization and Phylogenetic analyses of Rotaviruses Circulating in Municipal Sewage and Sewage-Polluted River Waters in Durban Area, South Africa.

Globally, rotavirus continues to be the leading etiology of severe pediatric gastroenteritis, and transmission of the disease via environmental reservoirs has become an emerging concern in developing countries. From August to October 2021, a total of 69 samples comprising 48 of raw and treated sewage, and 21 surface waters, were collected from four Durban wastewater treatment plants (DWWTP), and effluent receiving rivers, respectively. Rotaviruses recovered and identified from the samples were subjected to sequencing, genotyping, and phylogenetic analysis. Of the 65 (94.2%) rotavirus-positive samples, 33.3% were from raw sewage, 16% from activated sludge, 15.9% from final effluents, and 29.0% were from the receiving river samples. A total of 49 G and 41 P genotypes were detected in sewage while 15 G and 22 P genotypes were detected in river samples. G1 genotype predominated in sewage (24.5%) followed by G3 (22.4%), G2 (14.3%), G4 (12.2%), G12 (10.2%), G9 (8.2%), and G8 (6.1%). Similarly, G1 predominated in river water samples (33.3%) and was followed by G2, G4 (20.0% each), G3, and G12 (13.3% each). Rotavirus VP4 genotypes P[4], P[6], and P[8] accounted for 36.6%, 29.3%, and 9.8%, respectively, in sewage. Correspondingly, 45.5%, 31.8%, and 13.6% were detected in river samples. The G and P genotypes not identified by the methods used were 2.1% versus 24.3% and 0.1% versus 9.1% for sewage and river water samples, respectively. Sequence comparison studies indicated a high level of nucleotide identity in the G1, G2, G3, G4, G8 VP7, and P[4], P[6], and P[8] VP4 gene sequences between strains from the environment and those from patients in the region. This is the first environmental-based study on the G and P genotypes diversity of rotavirus in municipal wastewater and their receiving rivers in this geographical region. The high similarity between environmental and clinical rotavirus strains suggests both local circulation of the virus and potential exposure risks. In addition, it highlights the usefulness of sewage surveillance as an additional tool for an epidemiological investigation, especially in populations that include individuals with subclinical or asymptomatic infections that are precluded in case-based studies.

A phosphorylated guanidine chitosan and UiO-66-NH2 modified magnetic nanoparticle platform for enrichment and detection of multiple bacteria

Wastewater-based epidemiology (WBE) is a powerful tool for early warning of infectious disease outbreaks. Hence, a rapid and portable pathogen monitoring system is urgent needed for on-site detection. In this work, we first reported synthesis of an artificial modulated wide-spectrum bacteria capture nanoparticle (Arg-CSP@UiO@Fe3O4). Arginine-modified phosphorylated chitosan (Arg-CSP) coating could provide strongly positive charged guanidinium group for pathogen interaction by electrostatic attraction, and UiO-66-NH2 layer could help Arg-CSP graft onto Fe3O4 magnetic particles. The capture efficiency of Arg-CSP@UiO@Fe3O4 reached 92.2 % and 97.3 % for Escherichia coli (E.coli) and Staphylococcus epidermidis (S.epidermidis)within 40 min, in 10 mL sample. To prevent pathogen degradation in sewage, a portable nucleic acid extraction-free method was also developed. UiO-66-NH2 could disintegrate in buffer with high concentration of PO43− for bacterium desorption, and then nucleic acid of the bacteria was released by heating. The DNA template concentration obtained by this method was 779.28 times higher than that of the direct thermal lysis product and 8.63 times higher than that of the commercial kit. Afterwards, multiple detection of bacteria was realized by loop-mediated isothermal amplification (LAMP). Artificial regulated pathogen desorption could prevent non-specific adsorption of nucleic acid by nanoparticles. The detection limit of Arg-CSP@UiO@Fe3O4-LAMP method was 80 cfu/mL for E.coli and 300 cfu/mL for S.epidermidis. The accuracy and reliability of the method was validated by spiked sewage samples. In conclusion, this bio-monitoring system was able to detect multiple bacteria in environment conveniently and have good potential to become an alternative solution for rapid on-site pathogen detection.

Magnetic surface-imprinted polymer microspheres coupled with HPLC-MS/MS for sensitive detection of amphetamine-type drugs in water

Magnetic surface imprinted polymer microspheres (Fe3O4@MIPs) were successfully synthesized via Pickering emulsion polymerization, utilizing N-Methylphenethylamine as a surrogate template for amphetamine-type drugs. Fe3O4@MIPs not only possessed excellent dispersibility and enough magnetic properties in aqueous solutions, but also displayed good selectivity towards six amphetamines, with an imprinting factor ranging from 1.8 to 2.6. The adsorption kinetics closely aligned with the pseudo-second-order model, and the adsorption efficiency exceeds 80 % for each amphetamine at equilibrium. Fe3O4@MIPs were then employed as the efficient adsorbents for the extraction of amphetamine drugs. Extraction parameters, including sample pH, the mass of adsorbent, and the type and volume of eluting solvent, were carefully optimized. In combination with the high performance liquid chromatography tandem triple quadrupole mass spectrometry (HPLC-MS/MS), a selective magnetic solid-phase extraction (MISPE) method utilizing Fe3O4@MIPs was developed for the detection of six amphetamines in water samples. The limits of detection and limits of quantitation were determined to be 5.2∼23 ng L−1 and 17∼77 ng L−1, respectively. Recoveries for the six target drugs from lake water and sewage samples fell within the range of 87.2∼110 %. Additionally, the MISPE-HPLC-MS/MS method exhibited excellent repeatability, with a precision below 8.5 % at two spiking levels. The prepared Fe3O4@MIPs possessed the advantages of high selectivity, straightforward preparation, facile separation and good reusability, and was highly suitable for the efficient extraction of amphetamine-type substances in complex environmental water.

An optimized framework for metal ion analysis in automobile industrial sewage

This research paper presents an optimized approach for analyzing metal ions in automobile industrial sewage by integrating Dove Swarm Optimization (DSO) and a Recurrent Neural Network (RNN), termed DSbRNM. The DSbRNM approach is designed to detect and predict the concentration of metal ions in sewage samples. DSO is utilized to select the most relevant features, optimizing the feature set for the RNN. This optimization allows the RNN to perform classification with high accuracy, predicting metal ion concentrations effectively. The effectiveness of the DSbRNM approach was validated by analyzing real industrial sewage samples and comparing the results with those obtained using machine learning (ML) based convolutional methods. The results demonstrate that DSbRNM provides more accurate and reliable predictions of metal ion ranges. Furthermore, DSbRNM outperformed convolutional methods in terms of accuracy, recall, precision, and F1 score. The DSbRNM approach offers a rapid and effective solution for analyzing metal ions in automobile industrial sewage, enhancing the efficiency and effectiveness of wastewater treatment processes.