Sewage Treatment Research Articles

Performance and potential mechanisms for reactive electrochemical ceramic membrane system to inhibit resistance transmission in antibiotic-resistant contaminated wastewater: From a microbial perspective

Due to the widespread presence of antibiotic resistance genes (ARGs) in traditional biological wastewater treatment systems, electrochemical disinfection techniques have received extensive attention. The rTNA/Sb-SnO2/PbO2 Reactive Electrochemical Ceramic Membrane (RECM) system has demonstrated outstanding performance in effectively removing refractory antibiotics. However, its capacity to remove antibiotic resistant bacteria (ARB) remains unclear. In this study, an antibiotic resistant strain of Escherichia coli (AR E. coli) was employed to investigate the disinfection efficiency of the RECM system at a macroscopic level, along with its disinfection mechanism at a microscopic level. Furthermore, the secondary effluent from an antibiotic production wastewater treatment plant was collected to validate the disinfection performance of this system against ARB in actual wastewater. In the RECM system, the inactivation of AR E. coli and the removal of ARGs were primarily governed by the electrocatalytic process, with notable influences from critical factors such as current density, electrolyte type, and hydraulic retention time. Morphological observation and flow cytometry experiments confirmed that the AR E. coli in the RECM system was inactivated by alterations in cell morphology, leading to fragmentation, and by improvement in cell membrane permeability. More significantly, this system exhibited noteworthy efficiency in treating wastewater contaminated with antibiotic resistant pollutants, effectively eliminating both antibiotics and ARGs from the secondary effluent. Overall, our study comprehensively investigated the performance and underlying mechanisms of the RECM system in mitigating the dissemination of ARGs, as well as its potential feasibility of practical application.

Nutrient removal efficacy and microbial dynamics in constructed wetlands using Fe(III)-mineral substrates for low carbon-nitrogen ratio sewage treatment.

This study evaluated the roles of two common sources of Fe(III)-minerals-volcanic rock (VR) and synthetic banded iron formations from waste iron tailings (BIF-W)-in vertical flow-constructed wetlands (VFCWs). The evaluation was conducted in the absence of critical environmental factors, including Fe(II), Fe(III), and soil organic matter (SOM), using metagenomic analysis and integrated correlation networks to predict nitrogen removal pathways. Our findings revealed that Fe(III)-minerals enhanced metabolic activities and cellular processes related to carbohydrate decomposition, thereby increasing the average COD removal rates by 10.7% for VR and 5.90% for BIF-W. Notably, VR improved nitrogen removal by 1.70% and 5.40% compared to BIF-W and the control, respectively. Fe(III)-mineral amendment in bioreactors also improved the retention of denitrification and nitrification bacteria (phylum Proteobacteria) and anammox bacteria (phylum Planctomycetes), with increases of 3.60% and 3.20% using VR compared to BIF-W. Metagenomic functional predictionindicated that the nitrogen removal mechanisms in VFCWs with low C/N ratios involve simultaneous partial nitrification, ANAMMOX, and denitrification (SNAD). Network-based analyses and correlation pathways further suggest that the advantages of Fe(III)-minerals are manifested in the enhancement of denitrification microorganisms. Microbial communities may be activated by the functional dissolution of Fe(III)-minerals, which improves the stability of SOM or the conversion of Fe(III)/Fe(II). This study provides new insights into the functional roles of Fe(III)-minerals in VFCWs at the microbial community level, and provides a foundation for developing Fe-based SNAD enhancement technologies.

Theoretical insight into the removal process of isoquinoline by UV/Cl and UV/PDS: Oxidation mechanism and toxicity assessment

Isoquinoline (IQL), as a typical nitrogen-containing heterocyclic contaminant in coking wastewater, poses a serious threat to the aquatic environment and human health. Due to its chemical stability, traditional sewage treatment technology is not highly efficient in IQL removal. Advanced oxidation processes (AOPs) driven by ultraviolet radiation could be an effective treatment method, but it could generate toxic byproducts. In this work, the removal of IQL initiated by HO•, ClO•, Cl•, and SO4•- in UV/chlorine and UV/persulfate (PDS) process was comprehensively investigated, clarifying the degradation mechanism, reaction kinetics, and ecological toxicity. The findings indicate that the dominant oxidation mechanism of IQL by HO•, ClO•, and Cl• is radical adduct formation (RAF), while single electron transfer (SET) is the main reaction pathway of SO4•- with IQL. At 298 K and 1 atm, the order of rate constants for the reactions of IQL with active radicals is Cl• (6.23 × 1010 M-1 s-1) > SO4•- (8.81 × 109 M-1 s-1) > HO• (1.66 × 109 M-1 s-1) > ClO• (1.62 × 108 M-1 s-1). The acute and chronic toxicity of IQL and its degradation byproducts at three different trophic levels were evaluated using ECOSAR program. The byproducts produced by the oxidative degradation of IQL by HO• and SO4•- are mostly “not harmful”, and their toxicity shows a decreasing trend compared to that of IQL. The byproducts derived from the reaction of IQL with Cl• are all “toxic” or “harmful”, and the ranking of harm to three types of aquatic organisms is green algae > fish > daphnia. Hence, UV/PDS process could be more secure in pollutant disposal in wastewater. In actual water treatment process, merit attention should be paid to the potential hazards of the byproducts generated by various contaminants.

Crystallization behaviour, structure, and photocatalytic properties of SiO2-B2O3-Li2O-WO3-Bi2O3 glass-ceramics containing Bi2WO6 crystals

SiO2-B2O3-Li2O-WO3-Bi2O3 system parent glass was prepared by the melt-quenching method and glass-ceramics containing the Bi2WO6 crystals were obtained by a one-step heat treatment. The crystallization kinetics of the parent glass were investigated, and the effect of the different heat-treatment regimes on the microscopic morphology and optical bandgaps of the glass-ceramics was discussed. The results show that the crystallization activation energy of the parent glass is about 300 kJ/mol and the precipitated Bi2WO6 crystals exist in a columnar structure. As obtained from the UV-Vis spectra, the glass-ceramic with a heat treatment regime of 640 °C/2 h has the smallest optical bandgap (2.45 eV). During the photocatalytic degradation of methylene blue dye, the glass-ceramic with a heat treatment regime of 640 °C/2 h shows the best catalytic degradation performance, reaching a dye degradation rate of 76% at 120 min. The experimental results indicate that glass-ceramics containing Bi2WO6 crystals have promising applications in the field of sewage treatment.

Study on pretreatment technology of Oilfield Industrial Sewage

Abstract At present, Oilfield industrial sewage treatment has not yet formed mature technology. However, with the development of tight oil blocks and the construction of large-scale fracture network fracturing, the industrial sewage generated in A oilfield (including fracturing flow-back fluid, substitution fluid, water for well-flushing, pressure relief water, etc.) has increased year by year. The quality of produced water in oilfield has gradually deteriorated. Oilfield wastewater treatment is becoming more and more difficult. The built oil-bearing wastewater treatment process has shown inadaptability. In recent years, by analyzing the process operation parameters, studying the characteristics of oily wastewater treatment process, and combining with years of practical management experience, A oilfield has optimized the industrial wastewater pretreatment process. Optimize the process flow according to the actual development and production. This study ensures the development effect of the oilfield. It lays the foundation for further reducing the investment and operation cost of sewage station renovation. At the same time, it is great significance to study and optimize the pretreatment process of industrial sewage in oil field.

Integrating Suspended Sludge and Fixed Film into a Biological Wastewater Treatment System to Enhance Nitrogen Removal

Integrated fixed-film activated sludge (IFAS) technology greatly enhances nitrogen removal effectiveness and treatment capacity in municipal wastewater treatment plants, addressing the issue of limited land availability. Hence, this method is appropriate for treating household wastewater from office buildings. The research was conducted at the wastewater treatment plant in an office building in Ho Chi Minh City, Vietnam. Experiments were conducted to ascertain the most favorable working conditions, including hydraulic retention time (HRT), alkalinity dosage, and dissolved oxygen (DO). According to the study, the IFAS system had the highest nitrogen removal effectiveness when operated at a hydraulic retention time (HRT) of 7 h, an alkalinity dose of 7.14 mgCaCO3/mgN-NH4+, and a dissolved oxygen (DO) value of 6 mg/L. The nitrification efficiency ranges from 89.2% to 98.8%. The N-NO3− concentration post-treatment is within the range of 27–45 mgN-NO3−/L, which is lower than the allowable discharge limit of 60 mg/L as per Vietnam’s wastewater discharge requirements. The research findings have enhanced the efficiency of the office building management process, thereby promoting the sustainable growth of society.

Characterization of microbiome, resistome, mobilome, and virulome in anoxic and oxic wastewater treatment processes in Slovakia and Taiwan

This study presents a comprehensive analysis of samples from urban wastewater treatment plants using anoxic/oxic processes in Slovakia and Taiwan, focusing on microbiome, resistome, mobilome, and virulome, which were analyzed using a shotgun metagenomic approach. Distinct characteristics were observed; in Taiwan, a higher abundance and diversity of antibiotic resistance genes were found in both influent and effluent samples, while there was a higher prevalence of mobile genetic elements and virulence factor genes in Slovakia. Variations were noted in microbial community structures; influent samples in Taiwan were reflected from fecal and hospital sources, and those in Slovakia were derived from environmental elements. At the genus level, the samples from Taiwan's sewage treatment plants were dominated by Cloacibacterium and Bacteroides, while Acinetobacter was predominant in samples from Slovakia. Despite similar antibiotic usage patterns, distinct wastewater characteristics and operational disparities influenced microbiome, resistome, mobilome, and virulome compositions, with limited reduction of most resistance genes by the studied anoxic/oxic processes. These findings underscore the importance of region-specific insights into microbial communities for understanding the dynamics of antimicrobial resistance and pathogenicity in urban wastewater treatment systems. Such insights may lay the groundwork for optimizing treatment processes and reducing the dissemination of antibiotic resistance and pathogenicity genes for safeguarding public health.

MMO-induced batch and pilot-scale electro-oxidation treatment of municipal wastewater.

The present research aimed to explore the durability of MMO electrodes through electro-oxidation (EO) in purifying secondary treated actual sewage wastewater using batch and pilot-scale setups. The main aim is to inactivate bacteria in sewage treatment plants before they are released into the environment, thus contaminating water and soil. Process parameters such as current density (j), NaCl dose (n), and treatment time (t) were optimized using response surface methodology in a lab-scale EO reactor under batch conditions. The results showed that optimization of current density at 5.90mA/cm2 and NaCl concentration at 1.31g/L led to 93.90% of bacterial inactivation (Q1) within 8min of treatment and 0.48 kWh/m3 energy consumption (Q2). Biological analysis was conducted to validate bacterial cell destruction and count coliform bacteria in the EO-treated sewage wastewater. XRD, cyclic voltammetry studies, and FE-SEM/EDS analysis were done to confirm the MMO anode's durability and stability after 100 recycles. The study prioritized bacterial inactivation along with organic matter degradation. Besides that, a small pilot-scale study on the actual sewage wastewater with a volume of 10-50 L was done in batch mode under previously optimized conditions to analyze the efficacy of the MMO anodes in terms of bacterial inactivation.

Uncertainty Evaluation for the Determination of Perfluorinated Compounds in Wastewater Treatment Facility Effluent

This study evaluates the sources of uncertainty in the determination of poly & perfluorinated compounds(PFHxS, PFOS, PFOA) in the effluent of a wastewater treatment facility using LC-MS/MS. The uncertainty sources were identified and, numerically quantified, and the overall uncertainty of the final results was calculated through the synthesis and expansion of uncertainties. The main factors contributing to the combined standard uncertainty were identified as the construction of calibration curves, the reproducibility uncertainty from repeated tests, and the uncertainty associated with sample collection. By contrast, the effects of processes such as the volume filling of 1 mL standards after concentration and the injection of internal standards were found to be negligible. The relative expanded uncertainties for the three perfluorinated compounds were within 7.45%. The contributions to the overall uncertainty from sample collection, calibration curve construction, internal standard injection, volume filling of 1 mL standards, and reproducibility from repeat tests were 1.16~1.62%, 87.11~94.52%, 0.37~0.53%, 0.33~0.46%, 2.87~11.03%, respectively.

Biodegradation of linear alkylbenzene sulfonate contamination by pseudomonas aeruginosa isolates

Linear alkylbenzene sulphonate (LAS), a surfactant frequently incorporated into detergent formulations, typically ends up in wastewater treatment facilities after use. The present study aims to investigate the efficacy of bacteria isolated from Iraqi wastewater in removing LAS. This strain was identified as Pseudomonas aeruginosa by genetic analysis (16S rRNA). Three LAS concentrations (25, 50, and 100 mg/l) were employed in this investigation, along with three temperatures (30, 35, and 40 oC) and pH values (5, 7, 9). The LAS anionic surfactant demonstrated optimal biodegradation by Pseudomonas aeruginosa at a temperature of 30 °C and at pH levels of 7 and 9, with removal percentages of 93.76% and 90.4%, respectively, at a concentration of 25 mg/l of LAS. The study's findings demonstrated the possibility and importance of using aerobic biodegradation to remove LAS from actual effluents. This bacterium is useful for bioremediation because of its capacity to break down LAS.

Spatial variability of bacterial biofilm communities in a wastewater effluent-impacted suburban stream ecosystem.

Streams in arid and semi-arid biomes are often dependent on their flow from municipal sources, such as wastewater effluent. However, wastewater has been shown to contain high concentrations of nutrients and chemical pollutants that can potentially harm aquatic ecosystems and their biota. Understanding if and the type of microorganisms that respond to pollution sources, specifically effluent from wastewater treatment facilities, in regions where flow is predominantly from treatment facilities, is critical for developing a predictive monitoring approach for eutrophication or other ecological degradation states for freshwaters.

The research progress of bio char in environmental pollution and treatment

In recent years, various forms of environmental pollution have become increasingly severe, leading to a dangerous state in the atmosphere, water, and soil environments. This poses a threat to people's daily lives and has sparked widespread concern in society. Concurrently, bio char, a novel carbon material known for its large specific surface area, porosity, affordability, and excellent adsorption capabilities, has garnered attention. The incremental development and utilization of bio char have positioned it as a promising contender in sewage treatment, air pollution control, soil pollution treatment and other pollutant adsorption processes. This paper provides a comprehensive review of the preparation of bio char, its current research status, and the factors influencing its adsorption efficiency through an extensive literature survey.

Application of operating scenarios and analysis of unstable flow characteristics at various angles of inlet guide vane.

In this study, we analyzed the performance characteristics of an axial flow pump with different angles of internally installed inlet guide vanes (IGVs). We predicted the pump's performance based on changes in the IGV angle and analyzed the impact of these angle variations on pump operation in the low-flow region. Additionally, we used real operational data from two sewage treatment plants to propose efficient operational scenarios. For turbulence flow analysis, the Reynolds-averaged Navier-Stokes equations were discretized based on the finite volume method. The grid formation was evaluated using the grid convergence index to select the optimal grid. Then, the internal flow was analyzed in detail through transient-state analysis. Through fast Fourier transform analysis, we confirmed that adjusting the IGV angle during pump operation in the low-flow region in response to load changes results in more stable operation compared with the existing method (valve control). Overall, our findings verified that energy reduction and efficient operation can be achieved through IGV angle adjustment compared with valve control.

Persistent Organic Pollutants in Water and their Microalgae Based Bioremediation

ABSTRACT: This appraisal overviews Persistent Organic Pollutants and suggests a novel approach to their bioremediation using algae as an agent. Compared to older techniques using different bacteria, a greenway for wastewater treatment is more environmentally sustainable and friendlier. It has a lot of potential to use new bioremediation technology that uses cyanobacteria and algae to remove variety of organic pollutants. Several organisms' health and well-being may be at risk due to the abundance of organic pollutants in the environment. Household garbage, agriculture, and industry are some of the numerous man-caused contributors to organic pollutants that pollute water across the planet. Wastewater needs to be cleaned before it may be discharged into rivers. As algae-based wastewater treatment systems don't produce any secondary pollutants and are environmentally sustainable, they are growing in popularity. A variety of organic pollutants can be absorbed and accumulated by algae and cyanobacteria at different rates, contingent upon the type of contaminant, the physio-chemical assets of waste water, as well as the specific species of algae involved. Moreover, phytoremediation is a more affordable option for breaking down organic pollutants than traditional methods. Algal biomass produced through phycoremediation might also play a significant role in the bioenergy value chain. Hence the emphasis of this paper is on an over view of Persistent Organic Pollutants, cyanobacteria and microalgae species, which have the potential to rid water systems of several organic pollutants.

Unravelling the Seasonal Dynamics of Limnological Parameters and Assessment of Ecological Health: A Case Study of Lingadheeranahalli Lake in Bangalore North, Karnataka, India

ABSTRACT: The present study investigates the seasonal dynamics of limnological variables and the developmental response of D. rerio in the wetland ecosystem of Lingadheeranahalli in the northern clutches of Bangalore in Karnataka. Once a vital water source for agriculture and replenishing groundwater, the lake faces degradation due to anthropogenic activities and the need for more awareness. A yearlong analysis was conducted with five sampling seasons and three sampling stations identified within the wetland. Parameters viz. physical, chemical, and biological were analyzed following American Public Health Association (APHA) guidelines. Somite development was studied using embryos while the heart rate was counted during the torpedo stage of D. rerio. The results of this comprehensive study revealed unique and significant seasonal variations over limnological parameters, providing novel insights into the dynamics of the wetland ecosystem. pH values are slightly acidic and influenced by precipitation and terrestrial vegetation. Turbidity spiked during winter due to colloidal dispersions, while conductivity peaked in spring due to sewage disposal. Reduced dissolved oxygen, high biochemical and chemical oxygen demand indicated organic pollution and microbial activity, particularly affecting the inlet station. Elevated phosphate and nitrate levels in spring indicated eutrophication potential. The influence of rains and mineral leaching during monsoons affected parameters such as alkalinity, total dissolved solids, total hardness, and Magnesium. Analysis of D. rerio demonstrated delayed development and decreased heart rates in the inlet and deposit stations, indicative of potent stressors in the wetland ecosystem. All-inclusive Lingadheeranahalli Lake exhibited poor water quality, focusing on the need for adaptive management strategies to mitigate pollution and safeguard wetland ecosystems. Continued wetland research gives more insights into water quality and seasonal dynamics, paving the way for its conservation.

Insight into the impact of air flow rate on algal-bacterial granules: Reactor performance, hydrodynamics by Computational Fluid Dynamics (CFD) and microbial community analysis

This study evaluated the impact of air flow rates on nitrogen removal and the formation of algal-bacterial granules in domestic wastewater treatment, revealing that sodium acetate addition and aeration shifted the microbial community composition. Two separate feedings and the addition of external organic carbon significantly enhanced inorganic nitrogen removal efficiency (over 90 %), which might have contributed to the increased microbial diversity and the relative abundance of denitrifiers such as Acinetobacter. This study also demonstrates that the higher air flow rate (0.5 LPM) resulted in higher nitrification rates (up to 6.4 mg N/L/h) and produced smaller and denser granules. The higher air flow rate also led to the increasing relative abundances of nitrogen-related genera (such as Nitrospira) and the decreasing relative abundances of cyanobacteria and Chlorella. Computational Fluid Dynamics (CFD) simulations revealed that mechanical mixing predominantly generated shear force. Increasing the air flow rate from 0.2 LPM to 0.5 LPM only yielded a 12 % increment in the volume-averaged strain rate, suggesting diminishing returns from higher air flow rates in terms of shear force enhancement. Moreover, the decrease in total abundance of grazers and pathogens along with the operation, including Chytridiomycetes, Sessilida, and Operculariidae, might result from the shear force and the decrease of Chlorella spp.. This study underscores the critical roles of aeration and carbon source management in optimizing the performance and microbial ecology of algal-bacterial systems in wastewater treatment while minimizing energy inputs.

Fate of emerging contaminants in an advanced SBR wastewater treatment and reuse facility incorporating UF, RO, and UV processes

A critical factor for widescale water reuse adoption is the capability of advanced wastewater treatment facilities to consistently produce high-quality water by efficiently removing various pollutants, including emerging contaminants (ECs). This study monitored the fate of seventeen ECs (which included pesticides, antibiotics and other pharmaceutically active compounds) over six months in an advanced wastewater reuse facility situated in the United Arab Emirates. The facility integrates a sequencing batch reactor (SBR) based sewage treatment plant (STP) with a water recycling facility featuring ultrafiltration (UF), reverse osmosis (RO), and ultraviolet (UV) disinfection. ECs were detected and quantified at the influent and effluents of the various treatment stages, using an ultra-high-performance liquid chromatography coupled to electrospray ionization and quadrupole time-of-flight mass spectrometry (UHPLC-ESI-QTOF-MS). The STP exhibited variable removal efficiencies, achieving >90 % removal for compounds like caffeine and acetaminophen, while others, such as carbamazepine and thiabendazole, displayed poor removal (<10 %). UF treatment broadly resulted in limited removal, with ECs in permeate typically persisting in the 1–10 ng/L range. Subsequently, after undergoing RO treatment, eight ECs were still detected in the RO permeate, albeit at <1 ng/L, except for imidacloprid (2.5 ng/L). Conversely, the final UV disinfection step led to concentration increases of certain ECs, namely imidacloprid, thiabendazole, sulfamethoxazole, sulfamethazine and caffeine. Overall, the total EC concentration levels decreased considerably from 2300 ng/L in the STP influent to 5.2 ng/L in the RO permeate. However, a subsequent increase to 27.5 ng/L was observed after UV disinfection. While the study underscores the effectiveness of advanced treatment processes, notably RO, in reducing EC concentrations, it also demonstrates the importance of continuous EC monitoring in such facilities as many compounds persist post treatment. Additionally, the potential for processes like UV disinfection to increase certain EC concentrations highlights the need to optimize treatment trains to minimize EC concentration rebound.

Imperatives of Science of Sewage for Designing Efficient Wastewater Treatment System: Beyond Conventional approach to Sewage Management

Imperatives of Science of Sewage for Designing Efficient Wastewater Treatment System: Beyond Conventional approach to Sewage Management

Evaluation of Water Quality and Scarcity Issues for Sustainable Water Management Strategy in Twin Cities of Rawalpindi/ Islamabad, Pakistan.

Today's water world is pebbledashed with two main trepidations of water security/ scarcity, which need in-depth elaboration. Developing countries are particularly facing the impacts of water contamination and scarcity but lack the required impetus and technical infrastructure, thus necessitating swift actions to evaluate the effects of water security/ scarcity on the environment and water resources. In this study, an effort has been made to assess the water security/ scarcity situation in the twin cities of Rawalpindi/ Islamabad, elucidating the water quality/ quantity parameters in the Rawal Lake reservoir in Pakistan by analysing the contamination. The samples were collected/ tested during spring/ monsoon seasons to analyse temporal/fluvial impacts on water discharge. The results were compared with Pakistan's and WHO's drinking water standards before and after the water treatment. Almost all the testing parameters of the raw water samples from the Rawal Lake reservoir feeding streams exceeded the standard limits or fell close to the upper threshold limits, suggesting that this water was unsuitable for drinking without extensive treatment and an efficient distribution system. The contamination, untreated sewage disposal, non-regulated water utilisation, drawdown and supply/ demand gaps are the grave factors causing the water security/ scarcity in the capital/ twin cities of Islamabad/ Rawalpindi. Pakistan has already entered the water scarcity threshold of 1014 m3/ person/ annum in 2018, reduced from water availability of 5260 m3/ person/ annum in 1950 and will likely reach a drought level by 2050 due to increased population and reduced water resources. The study proposes an organisational implementation model for catchment-level river management to ensure good quality of water, construction of 5-10 small dams, and the provision of water from Terbella Dam suggested as the long-term strategy to prevent water scarcity.

Taxonomic variation, plastic degradation, and antibiotic resistance traits of plastisphere communities in the maturation pond of a wastewater treatment plant.

Wastewater treatment facilities can filter out some plastics before they reach the open environment, yet microplastics often persist throughout these systems. As they age, microplastics in wastewater may both leach and sorb pollutants and fragment to provide an increased surface area for bacterial attachment and conjugation, possibly impacting antimicrobial resistance (AMR) traits. Despite this, little is known about the effects of persistent plastic pollution on microbial functioning. To address this knowledge gap, we deployed five different artificially weathered plastic types and a glass control into the final maturation pond of a municipal wastewater treatment plant in Ōtautahi-Christchurch, Aotearoa/New Zealand. We sampled the plastic-associated biofilms (plastisphere) at 2, 6, 26, and 52 weeks, along with the ambient pond water, at three different depths (20, 40, and 60 cm from the pond water surface). We investigated the changes in plastisphere microbial diversity and functional potential through metagenomic sequencing. Bacterial 16S ribosomal RNA genes composition did not vary among plastic types and glass controls (P = 0.997) but varied among sampling times [permutational multivariate analysis of variance (PERMANOVA), P = 0.001] and depths (PERMANOVA, P = 0.011). Overall, there was no polymer-substrate specificity evident in the total composition of genes (PERMANOVA, P = 0.67), but sampling time (PERMANOVA, P = 0.002) and depth were significant factors (PERMANOVA, P = 0.001). The plastisphere housed diverse AMR gene families, potentially influenced by biofilm-meditated conjugation. The plastisphere also harbored an increased abundance of genes associated with the biodegradation of nylon, or nylon-associated substances, including nylon oligomer-degrading enzymes and hydrolases.IMPORTANCEPlastic pollution is pervasive and ubiquitous. Occurrences of plastics causing entanglement or ingestion, the leaching of toxic additives and persistent organic pollutants from environmental plastics, and their consequences for marine macrofauna are widely reported. However, little is known about the effects of persistent plastic pollution on microbial functioning. Shotgun metagenomics sequencing provides us with the necessary tools to examine broad-scale community functioning to further investigate how plastics influence microbial communities. This study provides insight into the functional consequence of continued exposure to waste plastic by comparing the prokaryotic functional potential of biofilms on five types of plastic [linear low-density polyethylene (LLDPE), nylon-6, polyethylene terephthalate, polylactic acid, and oxygen-degradable LLDPE], glass, and ambient pond water over 12 months and at different depths (20, 40, and 60 cm) within a tertiary maturation pond of a municipal wastewater treatment plant.