Quercus Petraea Research Articles

The potential of non-native tree species to provide major ecosystem services in Austrian forests.

Forestry is facing an unprecedented challenging time. Due to climate change, major tree species, which until recently fulfilled major ecosystem services, are being lost and it is often unclear if forest conversion with other native or non-native tree species (NNT) are able to maintain or restore the endangered ecosystem services. Using data from the Austrian Forest Inventory, we analysed the current and future (2081-2100, RCP 4.5 and RCP 8.5) productivity of forests, as well as their protective function (avalanches and rockfall). Five different species change scenarios were considered for the replacement of a tree species failing in the future. We used seven native tree species (Picea abies, Abies alba, Pinus sylvestris, Larix decidua, Fagus sylvatica, Quercus robur and Quercus petraea) and nine NNT (Pseudotsuga menziesii, Abies grandis, Thuja plicata, Pinus radiata, Pinus contorta, Robinia pseudoacacia, Quercus rubra, Fraxinus pennsylvanica and Juglans nigra). The results show that no adaptation would lead to a loss of productivity and a decrease in tree species richness. The combined use of native and NNT is more favorable than purely using native species in terms of productivity and tree species richness. The impact of the different species change scenarios can vary greatly between the different environmental zones of Austria (Alpine south, Continental and Pannonian). The Pannonian zone would benefit from the use of NNT in terms of timber production. For the protection against avalanches or rockfall in alpine regions, NNT would not be an advantage, and it is more important if broadleaved or coniferous trees are used. Depending on whether timber production, protective function or tree species richness are considered, different tree species or species change scenarios can be recommended. Especially in protective forests, other aspects are essential compared to commercial forests. Our results provide a basis for forest owners/managers in three European environmental zones to make decisions on a sustainable selection of tree species to plant in the face of climate change.

NYMPHA, a natural product for the conservation of ancient wood

In recent years, there has been a significant interest on sustainability and health-safety across various domains. Notably, many traditional chemicals employed in the preservation of Cultural Heritage pose environmental and human health risks. The NYMPHA project aimed to develop an eco-friendly solution using microalgae-derived polysaccharides to remove biological patinas from cultural heritage wooden materials, addressing sustainability and health concerns. To validate its efficacy, the product underwent testing on diverse woods such as silver fir, beech, and sessile oak, selected for their distinct anatomical characteristics. The analytical methodology involves three key steps: 1) determining the optimal extraction and application method through spectro-colorimetric measures and UV imaging; 2) evaluating surface color stability; and 3) assessing the product's effectiveness before and after exposure to a biological attack using spectro-colorimetry. Results indicate that the NYMPHA product can induce a color variation on some wood surfaces. Moreover, although it is reported that algae can have biocidal effects, in this experiment, this action is not observed probably due to the absence of sulphates in the polysaccharide molecule extracted from this specific strain. This emphasizes the necessity for further research and to explore new solutions beyond controlled laboratory conditions, specifically on naturally degraded materials.

A strategy for studying epigenetic diversity in natural populations: proof of concept in poplar and oak.

In the last 20 years, several techniques have been developed for quantifying DNA methylation, the most studied epigenetic marks in eukaryotes, including the gold standard method, whole-genome bisulfite sequencing (WGBS). WGBS quantifies genome-wide DNA methylation but has several inconveniences rendering it less suitable for population-scale epigenetic studies. The high cost of deep sequencing and the large amounts of data generated prompted us to seek an alternative approach. Restricting studies to parts of the genome would be a satisfactory alternative had there not been a major limitation: the need to select upstream targets corresponding to differentially methylated regions as targets. Given the need to study large numbers of samples, we propose a strategy for investigating DNA methylation variation in natural populations, taking into account the structural complexity of genomes, their size, and their content in unique coding regions versus repeated regions as transposable elements. We first identified regions of highly variable DNA methylation in a subset of genotypes representative of the biological diversity in the population by WGBS. We then analysed the variations of DNA methylation in these targeted regions at the population level by sequencing capture bisulfite (SeqCapBis). The entire strategy was then validated by applying it to another species. Our strategy was developed as a proof of concept on natural populations of two forest species: Populus nigra and Quercus petraea.

Total Carbon Storage in Uneven-Aged Pure Beech Stands in the Western Part of the Balkans

Forest ecosystems represent one of the largest and most important ecosystems on Earth, containing close to 80% of the biomass of our planet. As such, they play a significant role in the global carbon cycle because through photosynthesis, forests absorb more carbon than they emit and thus accumulate it. The most important species in deciduous forests in Europe, European beech (Fagus sylvatica L.), is of exceptional importance from the aspect of carbon storage. Considering that the state of carbon in pure beech forests is poorly investigated in the western part of the Balkans, the need for total carbon research was imposed to complete the picture of its stocks and factors that impact it. Research on total carbon (TC) storage in uneven-aged pure beech stands in the western part of the Balkans was carried out in three regions located approximately at the same latitude, but different longitude, imposing different macro-habitat characteristics. This research aimed to determine the TC stock and to examine the effects of orographic factors, stand canopy, and macroclimate on its values. TC stock in forest biomass was determined using appropriate regression equations and formulas, while soil organic carbon stock was determined using ICP forests methodology. Effects of different factors on carbon stock were examined using ANOVA (Type II Sums of Squares), General Linear Hypothesis Test (GLHT), and regression analyses. It was found that the largest TC stock is located in the region of Eastern Serbia (SRB) where its macroclimate is classified as suitable for hornbeam and sessile oak or mixed beech-oak stands. It was found that anthropogenic activity plays a significant role in the size of the carbon stock stored in above-ground biomass via alteration of forest canopy. The results also indicate that Aboveground Carbon (AGC) stocks are approximately proportional to Belowground Carbon (BGC; C in belowground biomass + soil C) stocks. What makes the difference is the structure of BGC, as the share of Soil Organic Carbon (SOC) is higher in the regions of Eastern Republic of Srpska (ERS) and Western Republic of Srpska (WRS), which are climatically classified as highly suitable for beech. Further analysis has shown that the amount of SOC decreases with increasing aridity levels. Given the results, management goals should be aimed at increasing the stock of biomass for the sake of carbon sequestration and for reducing the adverse effects of climate change, as a large amount of carbon can be stored in the above-ground and belowground biomass.

Source identification and assessment of heavy metal contamination in different plant species in the alpine ecosystems of Mt. Madra

Heavy metals are among important environmental pollutants due to their environmental persistence, toxicity and ability to accumulate in living organisms. The aim of the present study was to investigate the levels of aluminium (Al), boron (B), cobalt (Co), chromium (Cr), copper (Cu), and molybdenum (Mo) in plants sampled from Mt. Madra, analysed their distribution characteristics and investigated their origins using Positive Matrix Factorization (PMF) modelling. The multi-point sampling technique was used to collect samples of 26 plants from Madra Mountain at altitudes ranging from 177 m to 1347 m. Inductively-coupled plasma optical emission spectroscopy (ICP-OES) was used for the determination of metals. The metal concentrations (all in terms of mg/kg) determined by ICP-OES are the following sequences (mean ± standard deviation): Al (827.97 ± 198.95) > B (38.49 ± 2.50) > Co (0.74 ± 0.15) > Cr (1.90 ± 0.39) > Cu (7.68 ± 0.73) > Mo (0.51 ± 0.06). Based on the results obtained from the plant samples with the highest concentrations, the following metals were identified: Al (Ajuga orientalis, 4643.57 mg/kg), B (Quercus petraea, 69.25 mg/kg), Co (Ajuga orientalis, 4.23 mg/kg), Cr (Teucrium lamiifolium, 8.64 mg/kg), Cu (Ajuga orientalis, 19.75 mg/kg) and Mo (Ajuga orientalis, 1.07 mg/kg). In conclusion, the results of the source identification analysis conducted by PMF indicated that metal concentrations in the alpine zone have a primarily anthropogenic origin.

Can mixing Quercus robur and Quercus petraea with Pinus sylvestris compensate for productivity losses due to climate change?

The climate change scenarios RCP 4.5 and RCP 8.5, with a representative concentration pathway for stabilization of radiative forcing of 4.5 W m−2 and 8.5 W m−2 by 2100, respectively, predict an increase in temperature of 1–4.5° Celsius for Europe and a simultaneous shift in precipitation patterns leading to increased drought frequency and severity. The negative consequences of such changes on tree growth on dry sites or at the dry end of a tree species distribution are well-known, but rarely quantified across large gradients. In this study, the growth of Quercus robur and Quercus petraea (Q. spp.) and Pinus sylvestris in pure and mixed stands was predicted for a historical scenario and the two climate change scenarios RCP 4.5 and RCP 8.5 using the individual tree growth model PrognAus. Predictions were made along an ecological gradient ranging from current mean annual temperatures of 5.5–11.4 °C and with mean annual precipitation sums of 586–929 mm. Initial data for the simulation consisted of 23 triplets established in pure and mixed stands of Q. spp. and P. sylvestris. After doing the simulations until 2100, we fitted a linear mixed model using the predicted volume in the year 2100 as response variable to describe the general trends in the simulation results. Productivity decreased for both Q. spp. and P. sylvestris with increasing temperature, and more so, for the warmer sites of the gradient. P. sylvestris is the more productive tree species in the current climate scenario, but the competitive advantage shifts to Q. spp., which is capable to endure very high negative water potentials, for the more severe climate change scenario. The Q. spp.-P. sylvestris mixture presents an intermediate resilience to increased scenario severity. Enrichment of P. sylvestris stands by creating mixtures with Q. spp., but not the opposite, might be a right silvicultural adaptive strategy, especially at lower latitudes. Tree species mixing can only partly compensate productivity losses due to climate change. This may, however, be possible in combination with other silvicultural adaptation strategies, such as thinning and uneven-aged management.

Sessile oak (Quercus petraea [Matt.] Liebl.) and its adaptation strategies in the context of global climate change: a review

Abstract This paper provides characteristic and a comprehensive overview of the adaptation strategies of sessile oak (Quercus petraea [Matt.] Liebl.) in the context of global climate change (GCC). The GCC is primarily manifested by increasing air temperatures and changing precipitation distribution. It poses a significant challenge to tree species including sessile oak, affecting its capacity for adaptation and survival. Despite the challenge, sessile oak shows significant drought tolerance due to its deep-reaching root system, which allows the tree to use available water more efficiently. Other adaptive strategies include the establishment of mixed stands that increase the resilience and biodiversity of the ecosystem. Adjustments of stand density through tending interventions play a significant role, helping to improve the stress resistance of stands. Additionally, coppice forest cultivation is applied on extremely dry sites. The sessile oak is also significant for its ecological plasticity – its ability to thrive on versatile soil and climatic conditions makes it a promising tree species for future forest management. Mixed stands with sessile oak and other tree species can enhance the ecosystem services of forests and also increase their endurance to GCC events. However, sessile oak faces several challenges, including the increasing risk of damage from pests and pathogens that require targeted measures for its protection and sustainable cultivation. The literature review suggests that a comprehensive understanding of sessile oak’s ecological requirements and interactions with the environment is crucial for its successful adaptation to GCC and the formulation of effective strategies for its protection and use in forest management.

A warmer climate impairs the growth performance of Central Europe's major timber species in lowland regions

Recent hot droughts have caused tree vitality decline and increased mortality in many forest regions on earth. Most of Central Europe's important timber species have suffered from the extreme 2018/2019 hot drought, confronting foresters with difficult questions about the choice of more drought- and heat-resistant tree species. We compared the growth dynamics of European beech, sessile oak, Scots pine and Douglas fir in a warmer and a cooler lowland region of Germany to explore the adaptive potential of the four species to climate warming (24 forest stands). The basal area increment (BAI) of the two conifers has declined since about 1990–2010 in both regions, and that of beech in the warmer region, while oak showed positive BAI trends. A 2 °C difference in mean temperatures and a higher frequency of hot days (temperature maximum >30 °C) resulted in greater sensitivity to a negative climatic water balance in beech and oak, and elevated sensitivity to summer heat in Douglas fir and pine. This suggests to include hot days in climate-growth analyses. Negative pointer years were closely related to dry years. Nevertheless, all species showed growth recovery within one to three years. We conclude that all four species are sensitive to a deteriorating climatic water balance and hot temperatures, and have so far not been able to successfully acclimate to the warmer climate, with especially Douglas and beech, but also Scots pine, being vulnerable to a warming and drying climate.

A Five-Step Framework for Creating Forests for the Future

Changing environmental conditions, disturbances, and escalating demands for forest ecosystem services require foresters to restore present forestlands with new forest generations that will exhibit ecological integrity, diversity, high adaptive capacity, and the ability to provide essential ecosystem services. Establishing such forests requires careful consideration of the forest landscape and site dynamics. In pursuit of these requirements, we developed a novel framework that enables the restoration of forest sites and promotes the desired features of the forest complex at the same time. This framework was designed with the methods of system engineering and was organized in the same way as the forest planning process. It was tested in the habitat type of Illyrian Fagus sylvatica forests belonging to the Natura 2000 network. The environmental, vegetation, and site conditions were investigated via field inspections, available forest management plans, and simple GIS analyses. Additionally, we established a seminatural stand composed of European beech, sessile oak, sycamore maple, silver fir, and some wild fruit tree species. The survival of planted species was assessed using census and simple random sampling, the performance of provenances by the Student’s test, while microhabitat factors were explored by a one-way ANOVA. The survival rate of key species was estimated to be 55.6%, while that of fruit species was estimated to be 94.5%. Our framework demonstrated satisfactory performance and contained sufficient benchmarks to facilitate consistent decision-making. In the discussion, we elucidate the framework’s primary features and attributes of the mixed stand, where we also expose some open issues to be addressed in the future.

Effect of Combined Factors on Moth Communities in Western Hungarian Sessile Oak–Hornbeam Forests

Effect of Combined Factors on Moth Communities in Western Hungarian Sessile Oak–Hornbeam Forests

Whole-genome screening for near-diagnostic genetic markers for four western European white oak species identification

Key messageMining genome-wide DNA sequences enabled the discovery of near-diagnostic markers for species assignment in four European white oaks (Quercus petraea (Matt.) Liebl., Quercus pubescens Willd., Quercus pyrenaica Willd., and Quercus robur L.) despite their low interspecific differentiation. Near-diagnostic markers are almost fully fixed in one species and absent in the three others. As a result, only a handful of markers are needed for species identification, making this genetic assay a very promising operational taxonomic assignment procedure in research and forestry.ContextIdentifying species in the European white oak complex has been a long-standing concern in taxonomy, evolution, forest research, and management. Quercus petraea (Matt.) Liebl., Q. robur L., Q. pubescens Willd., and Q. pyrenaica Willd. are part of this species complex in western temperate Europe and hybridize in mixed stands, challenging species identification.AimsOur aim was to identify near-diagnostic single-nucleotide polymorphisms (SNPs) for each of the four species that are suitable for routine use and rapid diagnosis in research and applied forestry.MethodsWe first scanned existing whole-genome and target-capture data sets in a reduced number of samples (training set) to identify candidate diagnostic SNPs, i.e., genomic positions being characterized by a reference allele in one species and by the alternative allele in all other species. Allele frequencies of the candidates SNPs were then explored in a larger, range-wide sample of populations in each species (validation step).ResultsWe found a subset of 38 SNPs (10 for Q. petraea, 7 for Q. pubescens, 9 for Q. pyrenaica, and 12 for Q. robur) that showed near-diagnostic features across their species distribution ranges with Q. pyrenaica and Q. pubescens exhibiting the highest (0.876) and lowest (0.747) diagnosticity, respectively.ConclusionsWe provide a new, efficient, and reliable molecular tool for the identification of the species Q. petraea, Q. robur, Q. pubescens, and Q. pyrenaica, which can be used as a routine tool in forest research and management. This study highlights the resolution offered by whole-genome sequencing data to design near-diagnostic marker sets for taxonomic assignment, even for species complexes with relatively low differentiation.

In vivo X-ray microtomography locally affects stem radial growth with no immediate physiological impact.

Microcomputed tomography (µCT) is a nondestructive X-ray imaging method used in plant physiology to visualize in situ plant tissues that enables assessments of embolized xylem vessels. Whereas evidence for X-ray-induced cellular damage has been reported, the impact on plant physiological processes such as carbon (C) uptake, transport, and use is unknown. Yet, these damages could be particularly relevant for studies that track embolism and C fluxes over time. We examined the physiological consequences of µCT scanning for xylem embolism over 3 mo by monitoring net photosynthesis (Anet), diameter growth, chlorophyll (Chl) concentration, and foliar nonstructural carbohydrate (NSC) content in 4 deciduous tree species: hedge maple (Acer campestre), ash (Fraxinus excelsior), European hornbeam (Carpinus betulus), and sessile oak (Quercus petraea). C transport from the canopy to the roots was also assessed through 13C labeling. Our results show that monthly X-ray application did not impact foliar Anet, Chl, NSC content, and C transport. Although X-ray effects did not vary between species, the most pronounced impact was observed in sessile oak, marked by stopped growth and stem deformations around the irradiated area. The absence of adverse impacts on plant physiology for all the tested treatments indicates that laboratory-based µCT systems can be used with different beam energy levels and doses without threatening the integrity of plant physiology within the range of tested parameters. However, the impacts of repetitive µCT on the stem radial growth at the irradiated zone leading to deformations in sessile oak might have lasting implications for studies tracking plant embolism in the longer-term.

Canopy nitrogen application effects on Quercus petraea L. and Fagus sylvatica L. ring width and wood density

AbstractAs an essential nutrient, Nitrogen (N) availability is fundamental in evaluating forest productivity, and as such, understanding the effects of changing atmospheric N inputs in forest ecosystems is of high significance. While most field experiments have been employing ground fertilization as a method to simulate N deposition, two experimental forest sites in Italy have adopted the more advanced canopy N application approach. Here we present findings from a case study of wood core analyses of predominantly pure, even aged, Sessile oak (Quercus petraea L.) and European beech (Fagus sylvatica L.) forest stands, treated with either below or above canopy N fertilization, comparing between the two simulation pathways of increased N deposition. The potential effects of elevated N availability on total ring width, mean ring density, and their corresponding earlywood and latewood fractions are examined. Our results indicate inconclusive effects of the treatments on the ring width traits of both Q. petraea or F. sylvatica, although basal area increment patterns appeared to be affected divergently between the species and treatments. Mean and earlywood, but not latewood, densities on the other hand, exhibited a decrease in certain years of the treatment period in Q. petraea as result of the above canopy N application only, whereas F. sylvatica wood density showed no clear response to any of the treatments. Thus, we are describing distinct reactions of the two broadleaved species to the different experimental N deposition approaches, discussing potential growth patterns under increased N availability, and emphasizing the importance of considering wood density in assessments of tree biomass accumulation and essentially Carbon storage capacities.

Structural diversity and carbon stock of forest stands: tradeoff as modified by silvicultural thinning

AbstractIn forest management, merging stand structural diversity with carbon storage is essential for resilience and climate mitigation. This study assesses (1) how structural diversity in stands of spruce (Picea abies (L.) H. Karst.), pine (Pinus sylvestris L.), beech (Fagus sylvatica L.), and oak (Quercus robur L. and Quercus petraea (Matt.) Liebl.) in Central Europe varies with age, site quality, and applied thinning grade; (2) these factors' impact on carbon stock; and (3) the link between structural diversity and carbon stock. Analyzing 26 long-term thinning experiments, we used the Gini coefficient of tree heights to measure structural diversity and species-specific biomass functions for carbon stock assessments. Our results show that structural diversity, highest in beech and spruce, decreases with stand age and on richer sites. Thinning enhances structural diversity in spruce and beech but reduces it in pine and oak. Unthinned or only moderately thinned mature spruce and beech stands outperform pine and oak in carbon stock (200–300 vs. 100–150 Mg C ha−1). C- and D&E-grade thinning halves carbon stock. A decrease in vertical layering with increased carbon storage varies across species. Given the same carbon stock, thinning from above maintains structural diversity in spruce and beech, while non-thinning or thinning from below promotes structural diversity in pine and oak. Based on the current silvicultural practice reflected by the NFI data of Germany, we argue that reduced thinning in previously D&E-grade thinned stands may slightly reduce their structural diversity. However, a suspension or reduction of thinning would strongly improve carbon storage (+ 100–200 Mg C ha−1) in the next 3–5 decades. We discussed options for reconciling structural diversity and carbon storage by silvicultural management of the four considered species in Central Europe.

Research of chipper knives with a modified cutting edge for the production of dimensionally uniform wood chips

The paper is focused on the research of chipper knives with a straight and modified cutting edge in order to determine the energy consumption of the chipping process and the uniformity of the size of the fractions of the designed chipper knife for the production of dimensionally uniform chips. The research took place on two different tree species where the representative of the coniferous tree was the common spruce (Picea abies) and the deciduous tree was the winter oak (Quercus petraea). The research took place on a PTO-powered (power take off) disc chipping machine where it was not modified for research purposes. The results showed that a knife with a modified cutting edge is higher in terms of energy consumption than chipper knives with a straight cutting edge. From the evaluation of the sieve analysis for a chipper knife with a modified cutting edge, the energy chip of uniform granulometric composition is a homogeneous bulk material.

Nesting of the Black Stork (<i>Ciconia nigra</i>) in the province of Turin

[In 2023 a new nesting site of Balck Stork has been discovered for the first time in the Torino province, North-West Italy. Like most European Black Storks nesting in forest, this nest was built in a tree; in this case a Sessile Oak close to waterbodies such as rivers, streams and ponds.] [Short Communication in Italian]

Determining occupational exposure to inhalable wood dust in motor manual felling and processing

ABSTRACT The occupational exposure to softwood and hardwood wood dust was determined during forestry work in timber stands. In the determination of inhalable wood dust, three tree species (Fagus sylvatica, Quercus sp. and Pinus brutia) and three chainsaw operating parameters were taken into account (in total six assessment indicators). The first operating parameter was the chainsaw operating under normal conditions (regular chain sharpening). The second and third operating parameters were improper chainsaw maintenance (irregular chain sharpening) and low throttling pressing (operating the chainsaw at low engine speeds), respectively. The determination of inhalable wood dust concentrations from the ambient air was performed using the Inhalable Organic Matter (IOM) sampler, manufactured by SKC Button Sampler (Dorset, United Kingdom). Out of a total of 108 concentration cases of inhalable wood dust, 44 (40.74%) showed concentrations greater than 3.00 mg·m−3, while in 10 (9.26%) cases, the dust concentration exceeded 5 mg·m−3. The eight-hour time-weighted average exposure to wood dust ranged from 0.99 mg·m−3 to 12.52 mg·m−3, with an average of 4.22 mg·m−3. The results indicated that the increase in wood dust concentration was dependent on improper chainsaw maintenance, while low throttling pressing reduces dust concentration levels. Additionally, an increase in wood dust concentration was observed in species with thick bark (Pinus brutia and Quercus petraea).

Cryopreservation of sessile oak (Quercus petraea (Matt.) Liebl.) plumules using aluminium cryo-plates: influence of cryoprotection and drying

Background Quercusseeds that are recalcitrant to desiccation and freezing temperatures cannot be stored in gene banks under conventional conditions. However, the germplasm of some recalcitrant seeded species can be stored in liquid nitrogen (–196 °C). Unfortunately, for many species, among them for almost the whole genus Quercus, an effective cryostorage method is still unknown. In this study, we propose a successful cryostorage protocol for Quercus petraea (Matt.) Liebl. germplasm using plumules (a shoot apical meristem of an embryo) frozen on aluminium cryo-plates.ResultsThe plumules isolated from the acorns of ten provenances were prestored in 0.5 M sucrose solution (for 18 h). To form alginate beads (one plumule per bead), the plumules were placed in the wells of a cryo-plate and embedded in calcium alginate gel. For cryoprotection, the encapsulated plumules were immersed in cryoprotectant solution containing 2.0 M glycerol and different concentrations of sucrose (0.8–1.2 M) for 40 min at 25 °C and desiccated under a laminar flow cabinet for 1.0–4.0 h. Cryo-plates with plumules were directly immersed in liquid nitrogen and then cryostored for 30 min. For rewarming, cryo-plates with plumules were immersed in 1.0 M sucrose solution and rehydrated for 15 min at 25 °C. Survival rates varied from 25.8 to 83.4 were achieved after cryoprotection in 1.0 M sucrose solution and the drying of plumules for 2 h. The in vitro regrowth rate of cryopreserved plumules varied among provenances and was 26–77%.ConclusionsThis study presents, for the first time, a successful, simple and effective protocol for the cryopreservation of Q. petraea germplasm that could be used in gene banks. The experiment was successfully repeated on seeds from various provenances, each yielding similar, good results. However, seed quality and storage time after harvesting are important factors in plumule regrowth after cryopreservation.

Sensory profile and chemical quality of Merlot aged in barrels of different wood species

The cultivation of Vitis vinifera varieties in Brazil was established in 1970. With the opening of the market to imported labels and a greater variety of wines, viticulture became more competitive, and consumers became more demanding. The aging of wine is a system that involves several reactions based on the extraction of molecules from the wood and also on the micro-oxygenation of beverages. The objective of this study was to investigate the sensorial and chemical evolution of wines aged in barrels of different woods: French oak (Quercus petraea), Amburana (Amburana cearensis), and Jequitibá Rosa (Cariniana legalis). The comparison of the sensorial and chemical characteristics of the aged wine with the non-aged one allowed us to know the modifications resulting from the maturation time. Their distinct evolution among the different species was identified through chromatographic analysis of maturation congeners. Perceived sensory characteristics and acceptance of Brazilian woods were measured using the Napping and UltraFlash Profile methodologies. Tropical woods stood out in terms of acceptance by tasters, and the sensory attributes listed by the panel differ between both.

Effect of climate and wood type on elastic modulus of heat-treated wood and its optimization by the Taguchi method

Wood, as the oldest building material, provides some of the basic needs of human beings, including shelter and protection. Wood is used in exterior cladding, carrier systems, joinery, ceiling-floor coverings, windows, doors, and furniture production. When wooden material is exposed to external weather conditions, due to its hygroscopic structure, its physical and mechanical properties deteriorate from exposure to moisture, temperature, and biological organisms. The bending modulus of elasticity of Scots pine (Pinus sylvestris L.), oak (Quercus petraea L.), and chestnut (Castanea sativa M.) wood that was tannin-impregnated and heat-treated at 160 °C, was investigated using Taguchi L9 (33). The sequence was optimized. After heat treatment, the carrier elements were subjected to artificial climate conditions. In the optimization of the data obtained, it was understood that the highest impact factor was the tree type. In contrast, the climate on the elastic modulus was the lowest impact factor. In Taguchi analysis, a mathematical prediction model was created using actual and predicted data using the S/N ratio’s biggest-best equation. The R2 of the model can be predicted with an accuracy rate of 98.6%.