Sequential Ring-opening Metathesis Polymerization Research Articles

Efficient Synthesis and PISA Behavior of Molecular Bottlebrush Block Copolymers via a Grafting-From Strategy through RAFT Dispersion Polymerization

Precise synthesis of molecular bottlebrushes (MBBs) with high yield via the grafting-from strategy using a reversible deactivation radical polymerization (RDRP) technique has remained elusive. Herein, the molecular bottlebrush block copolymers (MBB BCPs) with high yield and varying chemical compositions were synthesized via a polymerization-induced self-assembly (PISA)-assisted grafting-from strategy by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization. First, the poly(norbornene-g-poly(ethylene oxide))-b-poly(norbornene-g-chain transfer agent) [P(NB-g-PEG45)-b-P(NB-CTA)] BCPs with varied chemical compositions were synthesized by sequential ring-opening metathesis polymerization (ROMP) of norbornene PEG macromonomers (NB-PEG45) and norbornene chain transfer agent (NB-CTA) monomers. Subsequently, these P(NB-g-PEG45)m-b-P(NB-CTA)n BCPs were used as multifunctional macro-CTAs for the synthesis of MBB BCPs with a high yield (up to 80% styrene monomer conversion) and a low dispersity (Đ < 1.15) via a grafting-from strategy through RAFT dispersion polymerization. The PISA behaviors of these MBB BCPs were also investigated, and the results indicated that the MBB BCPs assemblies were transformed from spherical micelles into two-dimensional disk-like micelles because the rigidity of the PS MBB segment increased with the growth of PS side chains.

Synthesis and Micellization of Bottlebrush Poloxamers.

Bottlebrush polymers are characterized by an expansive parameter space, including graft length and spacing along the backbone, and these features impact various structural and physical properties such as molecular diffusion and bulk viscosity. In this work, we report a synthetic strategy for making grafted block polymers with poly(propylene oxide) and poly(ethylene oxide) side chains, bottlebrush analogues of poloxamers. Combined anionic and sequential ring-opening metathesis polymerization yielded low dispersity polymers, at full conversion of the macromonomers, with control over graft length, graft end-groups, and overall molecular weight. A set of bottlebrush poloxamers (BBPs), with identical graft lengths and composition, was synthesized over a range of molecular weights. Dynamic light scattering and transmission electron microscopy were used to characterize micelle formation in aqueous buffer. The critical micelle concentration scales exponentially with overall molecular weight for both linear and bottlebrush poloxamers; however, the bottlebrush architecture shifts micelle formation to a much higher concentration at a comparable molecular weight. Consequently, BBPs can exist in solution as unimers at significantly higher molecular weights and concentrations than the linear analogues.

Synthesis and micellar property of amphiphilic brush-arm star copolymers via living ROMP

Norbornene macromonomers (MMs) with polystyrene (PS) or poly(tert-butyl acrylate) (PtBA) side chains were synthesized by a combination of atom-transfer radical polymerization (ATRP) and click reactions. A series of amphiphilic linear and star-shaped brush block copolymers were obtained through sequential ring opening metathesis polymerization (ROMP) of MMs by the use of the highly active olefin metathesis Blechert's catalyst and tri-functionalized Blechert's catalyst respectively, followed by hydrolysis reaction. These well-defined diblock molecular brushes can undergo further self-assembly to form spherical micelles in solution, which have been characterized using DLS, AF4-MALLS, AFM, TEM and fluorescence spectra. The dynamic diameter increases as the hydrophilic backbone content increases for the vast majority of the linear and star copolymers. Brush-arm star diblock amphiphilic copolymers have smaller hydrodynamic diameter and aggregation number than the corresponding linear analogues. Moreover, the critical micelle concentration (CMC) values of star diblock copolymers show less sensitive to the variety of composition.

Precise Synthesis and Thin Film Self-Assembly of PLLA-b-PS Bottlebrush Block Copolymers.

The ability of bottlebrush block copolymers (BBCPs) to self-assemble into ordered large periodic structures could greatly expand the scope of photonic and membrane technologies. In this paper, we describe a two-step synthesis of poly(l-lactide)-b-polystyrene (PLLA-b-PS) BBCPs and their rapid thin-film self-assembly. PLLA chains were grown from exo-5-norbornene-2-methanol via ring-opening polymerization (ROP) of l-lactide to produce norbornene-terminated PLLA. Norbonene-terminated PS was prepared using anionic polymerization followed by a termination reaction with exo-5-norbornene-2-carbonyl chloride. PLLA-b-PS BBCPs were prepared from these two norbornenyl macromonomers by a one-pot sequential ring opening metathesis polymerization (ROMP). PLLA-b-PS BBCPs thin-films exhibited cylindrical and lamellar morphologies depending on the relative block volume fractions, with domain sizes of 46–58 nm and periodicities of 70–102 nm. Additionally, nanoporous templates were produced by the selective etching of PLLA blocks from ordered structures. The findings described in this work provide further insight into the controlled synthesis of BBCPs leading to various possible morphologies for applications requiring large periodicities. Moreover, the rapid thin film patterning strategy demonstrated (>5 min) highlights the advantages of using PLLA-b-PS BBCP materials beyond their linear BCP analogues in terms of both dimensions achievable and reduced processing time.

Expeditious synthesis of aromatic-free piperidinium-functionalized polyethylene as alkaline anion exchange membranes.

Alkaline anion exchange membranes (AAEMs) with high hydroxide conductivity and good alkaline stability are essential for the development of anion exchange membrane fuel cells to generate clean energy by converting renewable fuels to electricity. Polyethylene-based AAEMs with excellent properties can be prepared via sequential ring-opening metathesis polymerization (ROMP) and hydrogenation of cyclooctene derivatives. However, one of the major limitations of this approach is the complicated multi-step synthesis of functionalized cyclooctene monomers. Herein, we report that piperidinium-functionalized cyclooctene monomers can be easily prepared via the photocatalytic hydroamination of cyclooctadiene with piperidine in a one-pot, two-step process to produce high-performance AAEMs. Possible alkaline-degradation pathways of the resultant polymers were analyzed using spectroscopic analysis and dispersion-inclusive hybrid density functional theory (DFT) calculations. Quite interestingly, our theoretical calculations indicate that local backbone morphology—which can potentially change the Hofmann elimination reaction rate constant by more than four orders of magnitude—is another important consideration in the rational design of stable high-performance AAEMs.

Spherical Photonic Nanostructures from High Molecular Weight Liquid Crystalline Brushlike Block Copolymers

We demonstrate sequential ring-opening metathesis polymerization (ROMP) of norbornene bearing n-alkyloxycyanobiphenyl (NBCB12) and norbornene bearing poly(dl-lactide) (NBPLA) to synthesize low poly...

Macromolecular Brushes Based on Poly(L-Lactide) and Poly(ε-Caprolactone) Single and Double Macromonomers via ROMP. Synthesis, Characterization and Thermal Properties.

Single and double poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) macromonomers having a norbornenyl polymerizable group were prepared by conventional Ring Opening Polymerization (ROP). These macromonomers were further subjected to ring opening metathesis polymerization (ROMP) reactions in order to produce double polymer brushes consisting of PLLA or PCL side chains on a polynorbornene (PNBE) backbone. Statistical or block ring opening metathesis copolymerization of the PLLA and PCL macromonomers afforded the corresponding random and block double brushes. Sequential ROMP of the single PLLA, PCL and PLLA macromonomers resulted in the synthesis of the corresponding triblock copolymer brush. The molecular characteristics of the macromolecular brushes were obtained by 1H-NMR spectroscopy and Size Exclusion Chromatography. The thermal properties of the samples were studied by thermogravimetric analysis, TGA, Differential Thermogravimetry, DTG and Differential Scanning Calorimetry, DSC.

Hydrogen Bonding-Mediated Phase Transition of Polystyrene and Polyhydroxystyrene Bottlebrush Block Copolymers with Polyethylene Glycol

A simple strategy was explored to systematically control the phase transition of an amphiphilic bottlebrush block copolymer (AmBBCP), poly[(norbornene-graft-styrene)-block-(norbornene-graft-hydroxystyrene)], with polymeric additives, such as poly(ethylene glycol) methyl ether (mPEG), poly(2-vinylpyridine) (P2VP), and poly(methyl methacrylate) (PMMA). The precursor polymers, poly[(norbornene-graft-styrene)-block-(norbornene-graft-4-tert-butoxystyrene)], were synthesized by sequential ring-opening metathesis polymerization of ω-end-norbornyl polystyrene and poly(4-tert-butoxystyrene). Acid hydrolysis of the tert-butyl groups in the precursor resulted in the AmBBCP with an ultrahigh molecular weight (∼2880 kDa) and relatively low dispersity (∼1.21). The disordered structures of neat AmBBCP were transformed to ordered lamellae by solvothermal annealing. AmBBCP and mPEG blended well because of H-bonding, maintaining well-ordered lamellae up to 40 wt % mPEG. The phase transition from ordered to disordered state occurred when increasing more than 50 wt %. The AmBBCP blended with P2VP and PMMA was compared. The effect of mPEG on phase transition, domain size, and refractive index and the photonic properties were determined.

Alcohols responsive photonic crystals prepared by self-assembly of dendronized block copolymers

Photonic crystals are widely used in chemical sensing for their visually color change. In this work, by proper design of the dendronized brush block copolymers, one dimensional photonic crystals (1D PCs) films that turned to different colors with different alkyl alcohols, alcohols isomers and alcohols mixtures were reported. Specifically, dendronized block copolymer (P(NAM-r-NDMA)-b-PNBM) with alcohols soluble PNAM block and alcohols insoluble PNBM block was prepared by sequential ring-opening metathesis polymerization of the corresponding monomers. The 1D PCs films with lamellar structures were prepared by self-assembly of P(NAM-r-NDMA)-b-PNBM. By swollen in alcohols and alcohol isomers with carbon numbers less than 8, the domain size of the 1D PCs changed, and the reflected wavelength red shifted to show different color as a result. Furthermore, in the binary alcohols mixtures and the alcohol aqueous solution, the color of the film changes with variation of the component, which can be used in semi-quantitative analyses. The alcohols responsive 1D PCs are very promising in visual, portable and reusable detection of alkyl alcohols.

Olefin metathesis in multiblock copolymer synthesis.

Multiblock copolymers constitute a basis for an emerging class of nanomaterials that combine various functional properties with durability and enhanced mechanical characteristics. Our mini-review addresses synthetic approaches to the design of multiblock copolymers from unsaturated monomers and polymers using olefin metathesis reactions and other ways of chemical modification across double C=C bonds. The main techniques, actively developed during the last decade and discussed here, are the coupling of end-functionalized blocks, sequential ring-opening metathesis polymerization, and cross metathesis between unsaturated polymers, or macromolecular cross metathesis. The last topic attracts special interest due to its relative simplicity and broad opportunities to tailor the structure and hence the properties of the copolymer products. Whenever possible, we analyze the structure–property relations for multiblock copolymers and point to their possible practical applications.

Synthesis and Mechanochemical Activation of Ladderene-Norbornene Block Copolymers.

We have recently reported a polymechanophore system, polyladderene (PLDE), which dramatically transforms into polyacetylene (PA) upon mechanical stimulation. Herein, we optimized conditions to synthesize unprecedented block copolymers (BCPs) containing a force-responsive block by sequential ring-opening metathesis polymerization of different norbornenes and bromoladderene. Successful extension from PLDE to other blocks required careful timing and low temperatures to preserve the reactivity of the PLDE-appended catalyst. The PLDE-containing BCPs were sonochemically activated into visually soluble PA with a maximum absorption λ ≥ 600 nm and unique absorption patterns corresponding to noncontinuous activation of ladderene units. Access to polymechanophore BCPs paves the way for new stress-responsive materials with solution and solid state self-assembly behaviors and incorporation of polymechanophores into other materials.

Experimental Formulation of Photonic Crystal Properties for Hierarchically Self-Assembled POSS–Bottlebrush Block Copolymers

Rodlike “POSS–bottlebrush block copolymers” (POSSBBCPs) containing crystalline polyhedral oligomeric silsesquioxane (POSS) pendants in A block and amorphous polymeric grafts in B block were utilized to create one-dimensional (1D) photonic crystals (PCs). 3-(12-(cis-5-Norbornene-exo-2,3-dicarboximido)dodecanoylamino)propylheptaisobutyl POSS (NB-A16-POSS, MA) and exo-5-norbornene-2-carbonyl-end poly(benzyl methacrylate) (NBPBzMA, MB) were employed in sequential ring-opening metathesis polymerization to afford poly[3-(12-(cis-5-norbornene-exo-2,3-dicarboximido)dodecanoylamino)propylheptaisobutyl POSS]-block-poly(exo-5-norbornene-2-carbonylate-graft-benzyl methacrylate)s, P(NB-A16-POSS)-b-P(NB-g-BzMA)s, with well-modulated block compositions (fA = 34, 50, and 67 wt %) and overall degrees of polymerization (DP = 323–939). The P(NB-A16-POSS)-b-P(NB-g-BzMA)s hierarchically self-assembled to form highly ordered 1D PC films with periodic lamellar arrays that can reflect visible light with particular wavelengths. T...

Multifunctional Vesicles from a Self-assembled Cluster-Containing Diblock Copolymer.

We describe a new diblock copolymer composed of two segments with complementary functionalities. One block contains pendent photo-cross-linkable cinnamoyl groups, and the other contains molecular clusters, Co6Se8, capable of multielectron redox processes. This multifunctional macromolecule is synthesized by sequential ring-opening metathesis polymerization of monomers constructed using norbornene moieties. Remarkably, the tethered molecular cluster gives access to three different charge states in N, N-dimethylformamide: neutral, +1, and +2. In tetrahydrofuran, by contrast, the charged copolymer self-assembles into vesicles that inhibit the redox reactions. The wall of these vesicles can be cross-linked by exploiting the photoinduced 2 + 2 cycloaddition of the cinnamoyls to form cyclobutane dimers. Moreover, these vesicles can be loaded with molecular cargo and used as cross-linkable containers; we demonstrate this feature by encapsulating the molecular dye methylene blue into the capsules. Our work is the first report of a well-defined block copolymer containing a metal chalcogenide molecular cluster; more generally, it opens the door to new applications of metal-containing polymers.

Precise Synthesis of Bottlebrush Block Copolymers from ω-End-Norbornyl Polystyrene and Poly(4-tert-butoxystyrene) via Living Anionic Polymerization and Ring-Opening Metathesis Polymerization

A facile and efficient synthetic grafting-through strategy for preparing well-defined bottlebrush block copolymers (BBCPs) was developed through a combination of living anionic polymerization (LAP) and ring-opening metathesis polymerization (ROMP). ω-End-norbornyl polystyrene (NPSt) and poly(4-tert-butoxystyrene) (NPtBOS) were synthesized by LAP using terminator of chlorine moiety containing silane-protecting amine and coupled with a subsequent amidation using norbornyl activated ester. Bottlebrush homopolymers of NPSt were obtained by ROMP with ultrahigh molecular weights (MWs, Mw = 2928 kDa) and narrow molecular weight distributions (MWDs, Đ = 1.07) at high degree of polymerizations (DPw = 1084). Well-defined BBCPs with ultrahigh MWs (Mw ∼ 3055 kDa) and narrow MWDs (Đ ∼ 1.13) were synthesized through sequential ROMP of NPSt with NPtBOS. The effect of ultrahigh MWs was investigated by self-assembly of the BBCPs in which the phase-separated BBCPs presented periodic lamellar structures and exhibited structural colors from blue to pink.

Photoresponsive Polymeric Reversible Nanoparticles via Self-Assembly of Reactive ABA Triblock Copolymers and Their Transformation to Permanent Nanostructures.

Azobenzene-functionalized ABA triblock copolymers with controlled molecular weights are prepared first via a sequential ring-opening metathesis polymerization and acyclic diene metathesis polymerization in one-pot, which are readily converted, by a facile esterification, to the modified ABA triblock copolymers. Then, these reactive triblock copolymers can spontaneously self-assemble in a selective solvent to form reproducible and reversible polymeric core-shell nanoparticles. Finally, the stable and permanent shell-crosslinked nanoparticles are obtained by an intramolecular crosslinking reaction in dilute solution under UV light irradiation. These as-prepared polymeric nanoparticles and their precursor incorporating azobenzene chromophores exhibit distinct photoresponsive performance and morphological variation.

Ring-opening metathesis polymerization of cis-5-norbornene-endo-2,3-dicarboxylic anhydride derivatives using the grubbs third generation catalyst

A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride (NDCA, M1) derivatives (M2-M4) with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectrometry (MS). Ring-opening metathesis polymerization (ROMP) of these monomers using the Grubbs third generation catalyst (G3) generated high molecular weight polymers with much improved solubility compared with the NDCA's homopolymer. It was found that the solubility of these polymers increased with increased substituent's steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent (M4) catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices (PDI) (<1.30). By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.

Novel Photoresponsive Linear, Graft, and Comb-Like Copolymers with Azobenzene Chromophores in the Main-Chain and/or Side-Chain: Facile One-Pot Synthesis and Photoresponse Properties.

Novel photoresponsive linear, graft, and comb-like copolymers with azobenzene chromophores in the main-chain and/or side-chain are prepared via a sequential ring-opening metathesis polymerization (ROMP) and head-to-tail acyclic diene metathesis (ADMET) polymerization in a one-pot procedure using Grubbs ruthenium-based catalysts. The diluted solutions of these as-prepared copolymers containing azobenzene chromophores exhibit photochemical trans-cis isomerization under the irradiation of UV light, followed by their cis-trans back-isomerization in visible light. The rates of photoisomerization are found to be slower than those of back-isomerization, and the rate for the comb-like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side-chain graft structure.

Synthesis of Pendant Nitronyl Nitroxide Radical-Containing Poly(norbornene)s as Ambipolar Electrode-Active Materials

Ambipolar redox-active polymers with a reversible charging and discharging capability were synthesized via ring-opening metathesis polymerization (ROMP) of nitronyl nitroxide radical (NN) mono- and disubstituted norbornenes which exhibited p- and n-type redox processes (i.e., one-electron oxidation and reduction per NN group, respectively), using Grubbs catalyst to avoid side reactions of the radical moiety allowing over 95% of radicals to survive after ROMP. ROMP of the NN monomers was accomplished with well-controlled molecular weights of the resulting NN polymers which were coincident with theoretical values in the ratio of [monomer]/[catalyst] = 25–200, narrow polydispersity index (ca. 1.2), and high yields even with [monomer]/[catalyst] > 600. The living character for the ROMP of the NN monomers also allowed block copolymerization. NN-containing block copolymers were synthesized through sequential ROMP with benzyl ether-containing norbornene in high yields. The NN polymer/carbon composite electrode exhibited both p- and n-type charging/discharging with plateau potentials near the redox potentials of the polymer at 0.78 and −0.80 V vs Ag/AgCl, respectively. The spin-coated layer electrode of the NN polymer immobilized on a current collector also demonstrated a fast charging/discharging performance in the range of 10–100 C rates and a cycle stability especially for the p-type reaction. These results made the NN polymer accessible as ambipolar electrode-active materials and also encouraged other organic radicals to be candidates for electroactive polymers.

Sequential ROMP of cyclooctenes as a route to linear polyethylene block copolymers

AB diblock copolymers were prepared by sequential ring-opening metathesis polymerization of cyclooctenes catalyzed by a Ru-based Grubbs catalyst. The relatively slow polymerization of cis-3-phenylcyclooct-1-ene (3PC) or cis-cyclooct-2-en-1-yl acetate (3AC) was first carried out and then followed by the faster polymerization of unsubstituted cis-cyclooctene (COE) from the active Ru-alkylidene chain ends. In contrast, simultaneous polymerization of the two monomers provides copolymers with a statistical monomer distribution owing to extensive chain transfer. The resulting poly(3PC-b-COE) and poly(3AC-b-COE) diblock copolymers were subjected to hydrogenation to selectively saturate the backbone alkenes. The consequences of architectural variance between the materials from simultaneous vs. sequential polymerizations are reflected by the contrasting thermal characteristics.

Morphological Phase Behavior of Poly(RTIL)-Containing Diblock Copolymer Melts

The development of nanostructured polymeric systems containing directionally continuous poly(ionic liquid) (poly(IL)) domains has considerable implications toward a range of transport-dependent, energy-based technology applications. The controlled, synthetic integration of poly(IL)s into block copolymer (BCP) architectures provides a promising means to this end, based on their inherent ability to self-assemble into a range of defined, periodic morphologies. In this work, we report the melt-state phase behavior of an imidazolium-containing alkyl–ionic BCP system, derived from the sequential ring-opening metathesis polymerization (ROMP) of imidazolium- and alkyl-substituted norbornene monomer derivatives. A series of 16 BCP samples were synthesized, varying both the relative volume fraction of the poly(norbornene dodecyl ester) block (fDOD = 0.42–0.96) and the overall molecular weights of the block copolymers (Mn values from 5000–20 100 g mol–1). Through a combination of small-angle X-ray scattering (SAXS) and dynamic rheology, we were able to delineate clear compositional phase boundaries for each of the classic BCP phases, including lamellae (Lam), hexagonally packed cylinders (Hex), and spheres on a body-centered-cubic lattice (SBCC). Additionally, a liquid-like packing (LLP) of spheres was found for samples located in the extreme asymmetric region of the phase diagram, and a persistent coexistence of Lam and Hex domains was found in lieu of the bicontinuous cubic gyroid phase for samples located at the intersection of Hex and Lam regions. Thermal disordering was opposed even in very low molecular weight samples, detected only when the composition was highly asymmetric (fDOD = 0.96). Annealing experiments on samples exhibiting Lam and Hex coexistence revealed the presence of extremely slow transition kinetics, ultimately selective for one or the other but not the more complex gyroid phase. In fact, no evidence of the bicontinuous network was detected over a 2 month annealing period. The ramifications of these results for transport-dependent applications targeting the use of highly segregated poly(IL)-containing BCP systems are carefully considered.