Sequence-directed Curvature Research Articles

The centromeric satellite of the wedge sole (Dicologoglossa cuneata, Pleuronectiformes) is composed mainly of a sequence motif conserved in other vertebrate centromeric DNAs

Here, a new satellite-DNA family is isolated and characterized from wedge sole, Dicologoglossa cuneata Moreau, 1881 (Pleuronectiformes), a fish having a small genome. This satellite-DNA family of sequences was isolated by conventional cloning after digestion of genomic DNA with the DraI restriction enzyme. Repeat units are 171 bp in length with a high AT content (63%). Several runs of consecutive adenines and thymines were found, and concomitantly computer analyses revealed that these regions are prone to acquire stable sequence-directed curvature. Especially remarkable is that the DraI sequences are composed almost entirely of the repetition of up to fourteen 9-bp motifs (T/C)GTC(A/C)AAAA similar to other vertebrate centromeric satellite-DNA sequences. In fact, we demonstrate the origin of this satellite through duplication of this motif plus the addition of a stretch of cytosines. The centromeric location and the presence in this satellite-DNA sequence of not only different vertebrate motifs (CENP-B box, pJα) but also others such as the CDEIII motif of Saccharomyces cerevisiae reveal a possible role in centromere function. All these characteristics provide important information on the origin, function, and the evolution of the centromeric satellite DNAs in wedge sole.

Nanopore current transduction analysis of protein binding to non-terminal and terminal DNA regions: analysis of transcription factor binding, retroviral DNA terminus dynamics, and retroviral integrase-DNA binding

BackgroundSynthetic transcription factors (STFs) promise to offer a powerful new therapeutic against Cancer, AIDS, and genetic disease. Currently, 10% of drugs are of this type, including salicylate and tamoxifen. STFs that can appropriately target (and release) their transcription factor binding sites on native genomic DNA provide a means to directly influence cellular mRNA production. An effective mechanism for screening amongst transcription factor (TF) candidates would itself be highly valued, and such may be possible with nanopore cheminformatics methods.ResultsIt is hypothesized that binding targets on channel-captured molecules, that are well away from the channel-captured region, can be monitored insofar as their binding status, or history, is concerned. The first set of experiments we perform to explore this "transduction" hypothesis involve non-terminal dsDNA binding to protein (DNA TATA box receptor binding to TBP), where we show new experimental results and application of a new cheminformatics data analysis method. In the second series of experiments to explore the transduction hypothesis we examine terminal (blunt-ended) dsDNA binding to protein. We show experimental results before and after introduction of HIV's DNA integrase to a solution of bifunctional "Y" shaped aptamers that have an HIV consensus terminus exposed for interaction.ConclusionX-ray crystallographic studies have guided our understanding of DNA structure for almost a century. It is still difficult, however, to translate the sequence-directed curvature information obtained through these tools to actual systems found in solution. With a nanopore detector the sequence-dependent conformation kinetics of DNA, especially at the DNA terminus, can be studied in a new way while still in solution and on a single molecule basis.

Centromere parC of plasmid R1 is curved

The centromere sequence parC of Escherichia coli low-copy-number plasmid R1 consists of two sets of 11 bp iterated sequences. Here we analysed the intrinsic sequence-directed curvature of parC by its migration anomaly in polyacrylamide gels. The 159 bp long parC is strongly curved with anomaly values (k-factors) close to 2. The properties of the parC curvature agree with those of other curved DNA sequences. parC contains two regions of 5-fold repeated iterons separated by 39 bp. We modified 4 bp within this intermediate sequence so that we could analyse the two 5-fold repeated regions independently. The analysis shows that the two repeat regions are not independently curved parts of parC but that the overall curvature is a property of the whole fragment. Since the centromere sequence of an E.coli plasmid as well as eukaryotic centromere sequences show DNA curvature, we speculate that curvature might be a general property of centromeres.

A unified model for the origin of DNA sequence-directed curvature.

The fine structure of the DNA double helix and a number of its physical properties depend upon nucleotide sequence. This includes minor groove width, the propensity to undergo the B-form to A-form transition, sequence-directed curvature, and cation localization. Despite the multitude of studies conducted on DNA, it is still difficult to appreciate how these fundamental properties are linked to each other at the level of nucleotide sequence. We demonstrate that several sequence-dependent properties of DNA can be attributed, at least in part, to the sequence-specific localization of cations in the major and minor grooves. We also show that effects of cation localization on DNA structure are easier to understand if we divide all DNA sequences into three principal groups: A-tracts, G-tracts, and generic DNA. The A-tract group of sequences has a peculiar helical structure (i.e., B*-form) with an unusually narrow minor groove and high base-pair propeller twist. Both experimental and theoretical studies have provided evidence that the B*-form helical structure of A-tracts requires cations to be localized in the minor groove. G-tracts, on the other hand, have a propensity to undergo the B-form to A-form transition with increasing ionic strength. This property of G-tracts is directly connected to the observation that cations are preferentially localized in the major groove of G-tract sequences. Generic DNA, which represents the vast majority of DNA sequences, has a more balanced occupation of the major and minor grooves by cations than A-tracts or G-tracts and is thereby stabilized in the canonical B-form helix. Thus, DNA secondary structure can be viewed as a tug of war between the major and minor grooves for cations, with A-tracts and G-tracts each having one groove that dominates the other for cation localization. Finally, the sequence-directed curvature caused by A-tracts and G-tracts can, in both cases, be explained by the cation-dependent mismatch of A-tract and G-tract helical structures with the canonical B-form helix of generic DNA (i.e., a cation-dependent junction model).

Mapping the intrinsic curvature and flexibility along the DNA chain.

The energy of DNA deformation plays a crucial and active role in its packaging and its function in the cell. Considerable effort has gone into developing methodologies capable of evaluating the local sequence-directed curvature and flexibility of a DNA chain. These studies thus far have focused on DNA constructs expressly tailored either with anomalous flexibility or curvature tracts. Here we demonstrate that these two structural properties can be mapped also along the chain of a "natural" DNA with any sequence on the basis of its scanning force microscope (SFM) images. To know the orientation of the sequence of the investigated DNA molecules in their SFM images, we prepared a palindromic dimer of the long DNA molecule under study. The palindromic symmetry also acted as an internal gauge of the statistical significance of the analysis carried out on the SFM images of the dimer molecules. It was found that although the curvature modulus is not efficient in separating static and dynamic contributions to the curvature of the population of molecules, the curvature taken with its direction (its sign in two dimensions) permits the direct separation of the intrinsic curvature from the flexibility contributions. The sequence-dependent flexibility seems to vary monotonically with the chain's intrinsic curvature; the chain rigidity was found to modulate as its local thermodynamic stability and does not correlate with the dinucleotide chain rigidities evaluation made from x-ray data by other authors.

An intrinsic DNA curvature found in the cyanobacterium Microcystis aeruginosa K-81 affects the promoter activity of rpoD1 encoding a principal sigma factor.

The rpoD1 gene in the unicellular cyanobacterium Microcystis aeruginosa K-81 encodes a principal sigma factor of RNA polymerase and is transcribed under light and dark conditions to produce multiple monocistronic transcripts. In the 5'-upstream region from rpoD1 Promoter 2, which has a sequence of Escherichia coli type, we found a sequence-directed DNA curvature with an AT-rich sequence. Insertions of 2 to 21 base pairs introduced into the curved center changed a gross geometry of the original curved DNA structure. The rpoD1 promoter activities assayed in vivo by using transcriptional lacZ fusions were correlated with the change in the gross geometry in not only a cyanobacterium but also E. coli. In addition, RNA polymerase binding to the rpoD1 promoter region and the efficiency of the mRNA synthesis from the rpoD1 Promoter 2 were also affected in vitro by the change in the geometry. These results suggest that the tertiary structure of the curved DNA is important for the rpoD1 transcription. The deletion of the center region of the curvature resulted in a considerable reduction of the transcription from Promoter 2 in the cyanobacterium. This report demonstrates that a curved DNA plays a significant role in transcription in cyanobacteria, and that this functional curvature is located in the 5'-upstream region from the rpoD gene, which encodes a principal sigma factor in eubacteria.

DNA topological context affects access to eukaryotic DNA topoisomerase I.

We have analyzed the reactivity of a 217 base pair segment of the intrinsically curved Crithidia fasciculata kinetoplast DNA towards eukaryotic DNA topoisomerase I. The substrates were open [linear fragment and nicked circle] and closed minidomains [closed relaxed circle and circles with linking differences of -1 and -2]. We interpreted the results with the aid of a model that was used to predict the structures of the topoisomers. The modelling shows that the delta Lk(-1) form is unusually compact because of the curvature in the DNA. To determine the role of sequence-directed curvature in both the experimental and modeling studies, controls were examined in which the curved Crithidia sequence was replaced by an uncurved sequence obtained from the plasmid pBR322. Reactivity of the Crithidia DNA [as analyzed both by the cleavage and topoisomerization reactions] markedly varied among the DNA forms: (i) the hierarchy of overall reactivity observed is: linear fragment > nicked circular, closed circular [delta Lk(0)], interwound [delta Lk(-2)] > bent interwound [delta Lk(-1)]; (ii) the intensity of several cleavage positions differs among DNA forms. The results show that eukaryotic DNA topoisomerase I is very sensitive to the conformation of the substrates and that its reactivity is modulated by the variation of the compactness of the DNA molecule. The C. fasciculata sequence contains a highly curved segment that determines the conformation of the closed circle in a complex way.

What is The Basis of Sequence-Directed Curvature in DNAs Containing A Tracts?

A variety of solution and gel experiments show that DNAs containing tracts of 4-8 A's repeated in phase with the helix repeat are curved. Several independent analyses of these experiments argue that curvature resides in the A tracts themselves. In x-ray crystallographic studies of several DNAs containing A tracts, however, the A tracts are uncurved, leading to models in which curvature resides in the non-A tracts. This "curved general sequence model" has several problems, in our view. We review those, and we describe recent experiments that show that the dehydrating agents commonly used in x-ray crystallography markedly reduce curvature in gels and in solution, calling into question the ability of crystallography to determine the structural basis of DNA curvature. Finally, we discuss the critical role of hydration in curved DNAs and suggest new experiments that we hope could finally determine exactly which sequences are responsible for curvature.

Dehydrating agents sharply reduce curvature in DNAs containing A tracts.

The structural basis of DNA curvature remains elusive, because models for curvature based on crystallographic structures of molecules containing A tracts do not agree with any of the models for sequence-directed curvature based on solution studies. Here we demonstrate that the difference is probably due to MPD (2-methyl-2,4-pentanediol), the dehydrating agent commonly used in crystallography. One characteristic signature of curved DNA molecules is that they run anomalously slowly on polyacrylamide gels, appearing to be larger than they actually are. The gel anomalies of three curved DNAs from trypanosome kinetoplast minicircles drop monotonically with increasing MPD concentration, indicating that MPD straightens molecules that are curved in aqueous solution. This is not due to some non-specific effect of MPD on poly(dA) or polypurine tracts, because control molecules containing dA70 and dG43 run normally over the full range of MPD concentrations. Circular dichroism spectra are not affected by MPD, ruling out a conformational change to a structure outside the B-DNA family. The effect is not due to MPD-induced changes in phasing of the curved sequences, because MPD has virtually no effect on the linking numbers of relaxed plasmids containing either curved sequences or dA70. At the concentrations of MPD used in X-ray crystallography, the curvature of DNAs containing A tracts is substantially lower than in solution, which probably explains the ongoing discrepancies between the crystallographic results and models based on solution studies.

Sequence-directed DNA curvature in activator-binding sequence in the Escherichia coli kdp ABC promoter.

Sequence-directed DNA curvature in activator-binding sequence in the Escherichia coli kdp ABC promoter.

Studies of DNA bending and flexibility using gel electrophoresis.

Gel electrophoretic methods have become established as primary tools in the study and elucidation of sequence-directed curvature both in free DNA and in the operator DNA of several site-specific nucleoprotein complexes. Results using them have been generally consistent with physical methods sensitive to DNA structure and conformation in those instances where direct comparisons can be made, and in a number of cases, gel methods have provided unique information not presently available from other techniques. Two basic strategies have been used: one based upon anomalous gel mobility effects; and a second based upon cyclization properties of curved DNA. Within each of these categories, various approaches have been used, some of which can lead, in favorable cases, to quantitative estimation of bending angles. In this review, the various gel-based methods that have been used to date are critically discussed and the qualitative and quantitative information that can be obtained from them is evaluated. A number of possible structural models for DNA curvature are described and a distinction is drawn between static or fixed bending and bending due to anisotropic flexibility at specific sequence loci. The importance and roles of gel electrophoretic methods in providing experimental approaches to this question are discussed. It is suggested that both static curvature and anisotropic flexibility in operator DNA may provide much of the basis for indirect readout of sequence information by specific site-binding regulatory proteins.

Molecular analysis of the responder satellite DNA in Drosophila melanogaster: DNA bending, nucleosome structure, and Rsp-binding proteins.

The Responder (Rsp) locus of Drosophila melanogaster, the target locus of segregation distortion, is a satellite DNA array. This repeat array imparts some fitness advantage to the chromosomes bearing it. In this paper, we report the following three related molecular properties of this satellite repeat: (1) Sequence-directed curvature--On a polyacrylamide gel, Rsp-containing fragments migrate slower than would be predicted on the basis of their physical sizes. The extent of migration retardation correlates with the size and position of the Rsp sequence in a DNA fragment, suggesting that Rsp DNA is bent. The bending is shown to be affected by a DNA-binding drug (Hoechst 33258). (2) Nucleosome structure--Nucleosomes associated with Rsp repeats have an unusual spacing pattern. Instead of being spaced at approximately 190-bp intervals as is the bulk chromatin, they are separated at approximately 240-bp intervals, roughly the size of a dimeric Rsp repeat. The nucleosomal structure in the Rsp region is preferentially disrupted by Hoechst 33258, whereas the bulk chromatin appears to be insensitive to the drug. (3) Rsp-DNA binding proteins--Gel mobility-shift assays using nuclear extracts from pupae and end-labeled Rsp repeat demonstrate the presence of three distinct DNA-protein complexes. Competition assays suggest that these complexes are specific to the Rsp sequence, and two of these nucleoprotein complexes seem to be influenced by the presence of Hoechst 33258. The observed complexes are formed by nonhistone proteins of somatic origin and may be related to the normal functions of Rsp, rather than to the germ-line segregation distortion activities.

SEQUENCE-DIRECTED CURVATURE OF DNA

PERSPECTIVES AND OVERVIEW 756 General Perspective and Overview 756 Historical Perspective 757 THE RELATIONSHIP BETWEEN SEQUENCE AND CURVATURE 759 Investigations Employing Synthetic DNA Oligomers 759 Investigations Employing Base Analogues 760 Cooperativity and Sequence-Context Effects 762

Bend induced by the phage φ29 transcriptional activator in the viral late promoter is required for activation

Transcription initiation from the Bacillus subtilis phage φ29 late A3 promoter requires the viral protein p4, a transcriptional activator. Protein p4 binds to a region of the A3 promoter, located between nucleotides −50 and −100 relative to the transcription start site, that presents a sequence-directed curvature. This curvature is enhanced when protein p4 binds to the promoter. A number of deletion mutants at the carboxyl end of protein p4 have been constructed and their behavior as transcriptional activators of the late A3 promoter has been investigated. The binding of these deletion mutants to the late A3 promoter has been analyzed by gel retardation, DNase I footprinting, methylation interference and circular permutation assays. The results suggest that the last 12 amino acid residues of protein p4, six of which are positively charged, although not involved in the specific recognition of the promoter are responsible for part of the bend induced by protein p4 in its binding site. Evidence is presented which suggests that full induction of this curvature is needed for the transcription activation process. A model is proposed for protein p4 interaction with the A3 promoter, in which the bend is induced in two steps: first, two monomers of protein p4 bind to the inverted recognition sequences, subsequent interaction between them generating a bend between these sequences; second, the highly basic carboxyl terminus of protein p4 establishes non-specific electrostatic interactions with the DNA backbone inducing a bend at both ends of the protein p4 binding region.

Sequence-Directed Curvature Of Dna

The Hippo pathway was initially discovered in Drosophila melanogaster as a key regulator of tissue growth. It is an evolutionarily conserved signaling cascade regulating numerous biological processes, including cell growth and fate decision, organ size ...Read More

Induced Bending of Plasmid pLS1 DNA by the Plasmid-encoded Protein RepA

The broad host range streptococcal plasmid pLS1 encodes for a 5.1-kDa repressor protein, RepA. This protein has affinity for DNA (linear or supercoiled) and is translated from the same mRNA as the replication initiator protein RepB. By gel retardation assays, we observed that RepA shows specificity for binding to the plasmid HinfID fragment, which includes the target of the protein. The target of RepA within the plasmid DNA molecule has been located around the plasmid single site ApaLI. This site is included in a region that contains the promoter for the repA and repB genes and is contiguous to the plasmid ori(+). A complex sequence-directed DNA curvature is observed in this region of pLS1. Upon addition of RepA to plasmid linear DNA or to circularly permuted restriction fragments, this intrinsic curvature was greatly enhanced. Thus, a strong RepA-induced bending could be located in the vicinity of the ApaLI site. Visualization of the bent DNA was achieved by electron microscopy of complexes between RepA and plasmid DNA fragments containing the RepA target.

Molecular Analysis by Deletion and Site-Directed Mutagenesis of the cis-Acting Upstream Sequence Involved in Activation of the ompF Promoter in Escherichia coli1

Expression of the ompF gene coding for an outer membrane protein of Escherichia coli is regulated by a transcriptional activation mechanism that requires the ompR gene product that acts on nucleotides located upstream of the -35 and -10 regions of the ompF promoter. We previously demonstrated that this cis-acting upstream sequence displays a sequence-directed curvature of the DNA helix. To characterize the structure and function of this upstream sequence, a series of deletion mutants and base-substitution mutants of the upstream sequence of the ompF promoter were constructed, and their abilities as to OmpR-binding and activities of the ompF promoter were examined after they had been connected to the lacZ gene. The nucleotides extending from position -91 to -79 are essential not only for sequence-specific recognition of the ompF promoter by the OmpR protein, but also for OmpR-dependent activation of the ompF promoter. It was also demonstrated that the nucleotides extending from position -111 to -92 play a role in stimulation of the ompF expression. A local structural alteration in the ompF promoter was observed in some of the base-substitution mutants. Based on the results, the structure and function of the upstream sequence of the ompF promoter are discussed in relation to activation of the ompF promoter by the OmpR protein.

Sequence-directed curvature of repetitive AluI DNA in constitutive heterochromatin of Artemia franciscana.

An Alu I family of repeated DNA sequence 113 bp in length was found to be the major component of the heterochromatin in Artemia franciscana. On the basis of the analysis of cloned oligomeric (monomer to examer) heterchromatic fragments we predicted that the sequence could produce a stable curvature in chromosomal DNA. This prediction was confirmed by polyacrylamide gel electrophoresis analysis and by electron microscope observations. The anomalous mobility of these fragments is reversed when the DNA samples are electrophoresed in the presence of distamycin A. Moreover treatment of living Artemia with this drug produces visible decondensation of heterochromatic masses in the interphase nuclei.

Curved helix segments can uniquely orient the topology of supertwisted DNA

To show that DNA containing sharp sequence-directed curvature can preferentially establish ends of supertwisted domains, a highly curved DNA from Crithidia fasciculata was cloned into two sites separated by 28% in pBR325. When this construct (pJGC 2) was examined by electron microscopy, 63% of the supercoiled molecules were branched with three or more arms, and the remaining molecules appeared as linear interwound rods. The distance between the tips of two of the arms for the branched molecules measured within 2% of 28% of the DNA contour for 32% of the pJGC 2 molecules, as contrasted with only 6.6% for the poorly branched pBR325 DNA. When one of the curved segments in pJGC 2 was replaced by a highly curved fragment from SV40, similar results were obtained.