Separation Of Nanorods Research Articles

Generalized theory of smallest diameter of metallic nanorods

This Letter reports a generalized theory of the smallest diameter of metallic nanorods from physical vapor deposition. The generalization incorporates the effects of nanorod separation and those of van der Waals interactions on geometrical shadowing. In contrast, the previous theory for idealized geometrical shadowing [Phys. Rev. Lett. 110, 136102 (2013)] does not include any dependence on nanorod separation and it predicts the diameter to be about to of what the generalized theory does. As verification, numerical solutions and the generalized theory in closed-form agree in terms of effective deposition flux. As validation, experiments of physical vapor deposition and the generalized theory agree in terms of the diameter as a function of the separation of nanorods.

The Effect of Nanostructure Distribution on Subcooled Boiling Heat Transfer Enhancement over Nanostructured Plates Integrated Into a Rectangular Channel

In this study, subcooled flow boiling is investigated over nanostructured plates at flow rates ranging from 69 mL/min to 145 mL/min. The first configuration of the nanostructured plate includes ˜600-nm-long, closely packed copper nanorod arrays distributed randomly upon the surface with an average nanorod diameter of ˜150 nm, and the second configuration consists of a periodic structure having ˜600-nm-long copper (Cu) nanorods with an average nanorod diameter of ˜550 nm and a center-to-center nanorod separation of ˜1 μm. The nanorod arrays are deposited utilizing glancing angle deposition (GLAD) technique on the copper thin film (˜50 nm thick) coated on silicon wafer substrates. Dimensions of the test section, heat flux values, and flow rates are chosen to ensure that nanostructured plates remain intact along with their nanorods in their original shape and position, so that the nanostructured plates could be used for many experiments. A consistent increase (up to 30%) in heat transfer coefficients is observed on nanostructured plates compared to the Cu thin film, which is used as the control sample. However, no significant difference in the boiling heat transfer performance between the random and periodic nanorods was observed, which indicates that the distribution of nanostructures may not be very critical in achieving enhanced heat transfer. In light of the obtained promising results, channels with nanostructured surfaces are proven to be useful, particularly in applications such as cooling of small electronic devices, where conventional surface modification techniques are not applicable.

Coulombic interaction in the colloidal oriented-attachment growth of tetragonal nanorods

In this report, the analytical expression of Coulombic interaction between a spherical nanoparticle and a tetragonal nanorod is derived. To evaluate the Coulombic interaction in the oriented attachment growth of tetragonal nanorods, we analyze the correlation between the Coulombic interaction and the important growth parameters, including: nanoparticle—nanorod separation, aspect ratio of the nanorods, and surface charge density. Our work opens up the opportunity to investigate interparticle interactions in the oriented attachment growth of tetragonal nanorods.

Magnetophoresis of iron oxide nanoparticles at low field gradient: The role of shape anisotropy

Magnetophoresis of iron oxide magnetic nanoparticle (IOMNP) under low magnetic field gradient (<100T/m) is significantly enhanced by particle shape anisotropy. This unique feature of magnetophoresis is influenced by the particle concentration and applied magnetic field gradient. By comparing the nanosphere and nanorod magnetophoresis at different concentration, we revealed the ability for these two species of particles to achieve the same separation rate by adjusting the field gradient. Under cooperative magnetophoresis, the nanorods would first go through self- and magnetic field induced aggregation followed by the alignment of the particle clusters formed with magnetic field. Time scale associated to these two processes is investigated to understand the kinetic behavior of nanorod separation under low field gradient. Surface functionalization of nanoparticles can be employed as an effective strategy to vary the temporal evolution of these two aggregation processes which subsequently influence the magnetophoretic separation time and rate.

An insight into the Coulombic interaction in the dynamic growth of oriented-attachment nanorods

The dynamic evolution of the Coulombic interaction between a growing nanorod and an attaching nanoparticle in oriented-attachment growth is investigated via a recently-derived Coulombic interaction expression. With the incorporation of aspect ratio into each evaluation, the correlation between the Coulombic interaction and parameters including charge density, aspect ratio, synthetic temperature and nanoparticle–nanorod separation, is analyzed in detail. The analysis largely improves our understanding of the dynamic oriented-attachment growth from a fundamental energy perspective.

PEGylated gold nanorod separation based on aspect ratio: characterization by asymmetric-flow field flow fractionation with UV-Vis detection

The development of highly efficient asymmetric-flow field flow fractionation (A4F) methodology for biocompatible PEGylated gold nanorods (GNR) without the need for surfactants in the mobile phase is presented. We report on the potential of A4F for rapid separation by evaluating the efficiency of functionalized surface coverage in terms of fractionation, retention time (t R ) shifts, and population analysis. By optimizing the fractionation conditions, we observed that the mechanism of separation for PEGylated GNRs by A4F is the same as that for CTAB stabilized GNRs (i.e., according to their AR) which confirms that the elution mechanism is not dependent on the surface charge of the analytes and/or the membrane. In addition, we demonstrated that A4F can distinguish different surface coverage populations of PEGylated GNRs. The data established that a change in Mw of the functional group and/or surface orientation can be detected and fractionated by A4F. The findings in this study provide the foundation for a complete separation and physicochemical analysis of GNRs and their surface coatings, which can provide accurate and reproducible characterization critical to advancing biomedical research.

Gold nanorod separation and characterization by asymmetric-flow field flow fractionation with UV–Vis detection

The application of asymmetric-flow field flow fractionation (A4F) for low aspect ratio gold nanorod (GNR) fractionation and characterization was comprehensively investigated. We report on two novel aspects of this application. The first addresses the analytical challenge involved in the fractionation of positively charged nanoparticles by A4F, due to the interaction that exists between the negatively charged native membrane and the analyte. We show that the mobile phase composition is a critical parameter for controlling fractionation and mitigating the membrane-analyte interaction. A mixture of ammonium nitrate and cetyl trimethyl ammonium bromide at different molar ratios enables separation of GNRs with high recovery. The second aspect is the demonstration of shape-based separation of GNRs in A4F normal mode elution (i.e., Brownian mode). We show that the elution of GNRs is due both to aspect ratio and a steric-entropic contribution for GNRs with the same diameter. This latter effect can be explained by their orientation vector inside the A4F channel. Our experimental results demonstrate the relevance of the theory described by Beckett and Giddings for non-spherical fractionation (Beckett and Giddings, J Colloid and Interface Sci 186(1):53-59, 1997). However, it is shown that this theory has its limit in the case of complex GNR mixtures, and that shape (i.e., aspect ratio) is the principal material parameter controlling elution of GNRs in A4F; the apparent translational diffusion coefficient of GNRs increases with aspect ratio. Finally, the performance of the methodology developed in this work is evaluated by the fractionation and characterization of individual components from a mixture of GNR aspect ratios.

Smallest separation of nanorods from physical vapor deposition

In catalysis applications, it is desirable to have nanorods of smaller diameter. However, if the separation of nanorods is smaller than their diameter, nanorods will merge to become dense films. The separation of nanorods derives from the separation of nucleating clusters on the substrate. This letter reports a theory of the smallest separation of nanorods. This theory is in closed form and is verified by accompanying lattice kinetic Monte Carlo simulations. The theoretical prediction of transition from nanorods to dense films—when the separation of nanorods is smaller than their diameter—is in good agreement with in-house experimental observation.

Hydrophobicity of Teflon Coated Well-Ordered Silver Nanorod Arrays

ABSTRACTFrom wings of flies to plant leafs, hydrophobic surfaces are well-common in nature. Many of these surfaces have micro and nano hierarchical structures coated with low surface energy layer. In this work, we mimicked similar structure by fabricating Teflon coated periodic and well-ordered silver nanorod arrays and investigated the effect of nanorod separation on water contact angle (WCA). The silver nanorod arrays were deposited on patterned and flat silicon substrates using glancing angle deposition (GLAD) technique. Then a thin layer of Teflon was deposited on the silver nanorods by small angle deposition (SAD) technique. A systematic increase in water contact angle was observed with increasing nanorod separation which is attributed to the decreased area fraction of solid-liquid interface.

Nanorod Assemblies in Polymer Films and Their Dispersion-Dependent Optical Properties.

Optical absorption due to surface plasmon resonances in ensembles of gold nanorods (Au NRs) depends strongly on the nanorod separation and orientation. Here, we study the dispersion of polystyrene-functionalized Au NRs in polystyrene (PS) thin films using UV-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM) and find that Au NRs are dispersed for brush chain lengths that exceed the PS matrix chain length and are aggregated otherwise. Monte Carlo simulations using parameters from classical density functional theory (DFT) calculations indicate that this behavior is due to substantial depletion-attraction forces for brush chain lengths that are much smaller than the PS matrix chain length. Both UV-vis measurements and discrete dipole approximation (DDA) calculations confirm that optical absorption is a facile method to determine nanorod morphology in nanocomposite films (i.e., aggregation or dispersion). Futhermore, a dispersion map is constructed showing the conditions required for nanorod dispersion and, correspondingly, the optical absorption properties of Au NR:PS nanocomposites. Using this information, optically active materials with tunable morphologies can be fabricated and routinely characterized using optical spectroscopic methods.

Cell clarification and size separation using continuous countercurrent magnetophoresis

Magnetophoresis of iron oxide magnetic nanoparticle (IOMNP) under low magnetic field gradient (<100 T/m) is significantly enhanced by particle shape anisotropy. This unique feature of magnetophoresis is influenced by the particle concentration and applied magnetic field gradient. By comparing the nanosphere and nanorod magnetophoresis at different concentration, we revealed the ability for these two species of particles to achieve the same separation rate by adjusting the field gradient. Under cooperative magnetophoresis, the nanorods would first go through self- and magnetic field induced aggregation followed by the alignment of the particle clusters formed with magnetic field. Time scale associated to these two processes is investigated to understand the kinetic behavior of nanorod separation under low field gradient. Surface functionalization of nanoparticles can be employed as an effective strategy to vary the temporal evolution of these two aggregation processes which subsequently influence the magnetophoretic separation time and rate.

Separation of nanorods by density gradient centrifugation

The experimental conditions necessary for the synthesis of well-defined nanoparticles are often difficult to control. There is thus a compelling need for post-synthesis separation of nanoparticles polydispersed in size and shape. We demonstrate here both theoretically and experimentally that gold nanorods with diverse aspect ratios can be separated using density gradient centrifugation. By analysing the force balance of a Brownian rod falling in a Stokes flow, we derive a rigorous and predictive model that reveals the quantitative dependency of the nanorod sedimentation rates on their mass and shape. The calculations show that while mass dependency is still the dominating factor during centrifugation, the shape factor is not insignificant. Relatively heavier but long and thin rods could sediment slower than certain size of lighter spheres, and some rods and spheres with different masses and shapes may never be separated. This mass and shape dependency is exploited to separate as-prepared gold nanorod colloids by sucrose gradient centrifugation. Two layers of nanorods with narrow aspect-ratio distributions are obtained.

Assembly of Colloidal Semiconductor Nanorods in Solution by Depletion Attraction

Arranging anisotropic nanoparticles into ordered assemblies remains a challenging quest requiring innovative and ingenuous approaches. The variety of interactions present in colloidal solutions of nonspherical inorganic nanocrystals can be exploited for this purpose. By tuning depletion attraction forces between hydrophobic colloidal nanorods of semiconductors, dispersed in an organic solvent, these could be assembled into 2D monolayers of close-packed hexagonally ordered arrays directly in solution. Once formed, these layers could be fished onto a substrate, and sheets of vertically standing rods were fabricated, with no additional external bias applied. Alternatively, the assemblies could be isolated and redispersed in polar solvents, yielding suspensions of micrometer-sized sheets which could be chemically treated directly in solution. Depletion attraction forces were also effective in the shape-selective separation of nanorods from binary mixtures of rods and spheres. The reported procedures have the potential to enable powerful and cost-effective fabrication approaches to materials and devices based on self-organized anisotropic nanoparticles.

Self-Assembly of Highly Epitaxial (La,Sr)MnO3 Nanorods on (001) LaAlO3

Thin films consisting of perovskite ferromagnetic nanorod (La,Sr)MnO3 with highly epitaxial quality and well-defined nanorod separation have been synthesized with pulsed laser processing. Each nanorod has an in-plane dimension of about 20−30 nm and length equal to the thin film thickness that can vary from tens to hundreds of nm. Magnetic property measurements revealed that the magnetizations of the as-grown films are highly dependent on the evolved self-assembled structures with strong anisotropic behavior.