Sentinel-2 Multispectral Instrument Research Articles

Harmonized NDVI time-series from Landsat and Sentinel-2 reveal phenological patterns of diverse, small-scale cropping systems in East Africa

Capturing the phenological responses of crops in diverse, small-scale agricultural systems is one of the most notable remote sensing research gaps in Eastern Africa. Because of the heterogeneous and complex agricultural environments, remote sensing methodologies successfully implemented elsewhere yield poor results in Eastern Africa. The reliance on local rainfall and dry spells can lead to alterations in planting patterns, impacting growing season timing and yield, underscoring the importance of high temporal resolution for capturing crop phenology. We generated a high-resolution land use/land cover (LULC) classification map of 10 m using Sentinel-1 and Sentinel-2 imagery together with a large set of reference data acquired in situ in 2022. The LULC classification yielded an overall accuracy of 87.9% and Cohen's kappa value of 0.83. Based on the LULC map, we investigated the phenological metrics of the most important crops in the Kamuli district of Eastern Uganda by combining a multi-sensor harmonization approach, thresholding method, and cloud computing. Previously unavailable Landsat 9 band adjustment coefficients were derived. By harmonizing Landsat (LS) 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 and 9 Operational Land Imager (OLI), with Sentinel-2 Multispectral Instrument (MSI), the phenological patterns during the March to May growing season were captured using a dense temporal Normalized Difference Vegetation Index (NDVI) time series. The seasonal onset for most crop types was in the end of March to middle of April while the end of the growing season occurred from the end of June to middle of July. Investigation of the 13 crop types using a high-resolution LULC map and dense, harmonized NDVI time series signifies the first field-level phenological metrics estimation of smallholder farming systems in Eastern Africa. Future research should focus on expanding the methodology in space and time to provide insights into past and current growing season development.

Integrating hydrologic modeling and satellite remote sensing to assess the performance of sprinkler irrigation

ABSTRACT Improving irrigation water management is a key concern for the agricultural sector, and it requires extensive and comprehensive tools that provide a complete knowledge of crop water use and requirements. This study presents a novel methodology to explicitly estimate daily gross and net crop water requirements, actual crop water use, and irrigation efficiency of center pivot irrigation systems, by mainly utilizing the Sentinel-2 MultiSpectral Instrument (MSI) imagery at the farm scale. ETMonitor model is adapted to estimate actual water use (as the sum of canopy transpiration and evaporation of water intercepted by canopy and evaporation from soil) at daily/10-m resolution, benefiting from the high-resolution Sentinel-2 data and thus to assess the irrigation efficiency at the farm scale. The gross irrigation water requirement is estimated from the net crop water requirement and the water loss, including the water droplet evaporation directly into the air during application before droplets fall on the canopy and canopy interception loss. The method was applied to a pilot farmland with two major crops (wheat and potato) in the Inner Mongolia Autonomous Region of China, where modern equipment and appropriate irrigation methods are deployed for efficient water use. The estimated actual crop water use showed good agreement with the ground observations, e.g. the determination coefficients range from 0.67 to 0.81 and root mean square errors range from 0.56 mm/day to 1.24 mm/day for wheat and potato when comparing the estimated evapotranspiration with the measurement by the eddy covariance system. It also showed that the losses of total irrigated volume were 25.4% for wheat and 23.7% for potato, respectively, and found that the water allocation was insufficient to meet the water requirement in this irrigated area. This suggests that the amount of water applied was insufficient to meet the crop water requirement and the inherent water losses in the center pivot irrigation system, which imply the necessity to improve the irrigation practice to use the water more efficiently.

Estimation of Rice Plant Coverage Using Sentinel-2 Based on UAV-Observed Data

Vegetation coverage is a crucial parameter in agriculture, as it offers essential insight into crop growth and health conditions. The spatial resolution of spaceborne sensors is limited, hindering the precise measurement of vegetation coverage. Consequently, fine-resolution ground observation data are indispensable for establishing correlations between remotely sensed reflectance and plant coverage. We estimated rice plant coverage per pixel using time-series Sentinel-2 Multispectral Instrument (MSI) data, enabling the monitoring of rice growth conditions over a wide area. Coverage was calculated using unmanned aerial vehicle (UAV) data with a spatial resolution of 3 cm with the spectral unmixing method. Coverage maps were generated every 2–3 weeks throughout the rice-growing season. Subsequently, crop growth was estimated at 10 m resolution through multiple linear regression utilizing Sentinel-2 MSI reflectance data and coverage maps. In this process, a geometric registration of MSI and UAV data was conducted to improve their spatial agreement. The coefficients of determination (R2) of the multiple linear regression models were 0.92 and 0.94 for the Level-1C and Level-2A products of Sentinel-2 MSI, respectively. The root mean square errors of estimated rice plant coverage were 10.77% and 9.34%, respectively. This study highlights the promise of satellite time-series models for accurate estimation of rice plant coverage.

Combining multisensor images and social network data to assess the area flooded by a hurricane event.

In this study, multisensor remote sensing datasets were used to characterize the land use and land covers (LULC) flooded by Hurricane Willa which made landfall on October 24, 2018. The landscape characterization was done using an unsupervised K-means algorithm of a cloud-free Sentinel-2 MultiSpectral Instrument (MSI) image, acquired during the dry season before Hurricane Willa. A flood map was derived using the histogram thresholding technique over a Synthetic Aperture Radar (SAR) Sentinel-1 C-band and combined with a flood map derived from a Sentinel-2 MSI image. Both, the Sentinel-1 and Sentinel-2 images were obtained after Willa landfall. While the LULC map reached an accuracy of 92%, validated using data collected during field surveys, the flood map achieved 90% overall accuracy, validated using locations extracted from social network data, that were manually georeferenced. The agriculture class was the dominant land use (about 2,624 km2), followed by deciduous forest (1,591 km2) and sub-perennial forest (1,317 km2). About 1,608 km2 represents the permanent wetlands (mangrove, salt marsh, lagoon and estuaries, and littoral classes), but only 489 km2 of this area belongs to aquatic surfaces (lagoons and estuaries). The flooded area was 1,225 km2, with the agricultural class as the most impacted (735 km2). Our analysis detected the saltmarsh class occupied 541 km2in the LULC map, and around 328 km2 were flooded during Hurricane Willa. Since the water flow receded relatively quickly, obtaining representative imagery to assess the flood event was a challenge. Still, the high overall accuracies obtained in this study allow us to assume that the outputs are reliable and can be used in the implementation of effective strategies for the protection, restoration, and management of wetlands. In addition, they will improve the capacity of local governments and residents of Marismas Nacionales to make informed decisions for the protection of vulnerable areas to the different threats derived from climate change.

Stratified burn severity assessment by integrating spaceborne spectral and waveform attributes in Great Xing'an Mountain

Burn severity assessment is critical for understanding the pattern of post-fire vegetation recovery and ecosystem resilience. Previous studies proposed various field criteria (e.g., Composite Burn Index (CBI)) to quantify burn severity from strata level to total site level, yet suffering from surveyors' subjective interpretation across site conditions. High-resolution passive remote sensing allows for more objective assessment based on the strong relation between fire damages and spectral features. Importantly, burn severity generally characterizes differences between forest overstory and understory layers due to their discrepancies in vegetation structures and environmental conditions. Spatially explicit mapping of strata-level burn severity is vital for post-fire forest management and ecological function evaluation. Until now, almost no available spaceborne remote sensing method can concurrently assess overstory and understory burn severity over heterogeneous forests. In this study, we proposed a Hybrid Composite Burn Index (HCBI) that comprehensively indicates the fire-induced spectral and structural changes along the vertical profile by integrating spectral and waveform attributes from both active and passive remote sensing data. Firstly, we introduced two remote sensing-based rating factors namely relative spectral change (RSC) and relative waveform change (RWC), and established HCBI through weighting and scoring the rating factors. Subsequently, we evaluated the effectiveness and generality of overstory, understory, and total site HCBI based on various pairs of simulated remote sensing data of pre-fire and post-fire forest scenes. Thirdly, we derived the spatially discontinuous maps of overstory, understory, and total site HCBI of the Xiushan fire site in Great Xing'an Mountain using WorldView-2 (WV-2) multispectral imagery and Global Ecosystem Dynamics Investigation (GEDI) full-waveform LiDAR data. Finally, we produced wall-to-wall HCBI maps using multiple predictive variables from pre-fire and post-fire Sentinel-2 MultiSpectral Instrument (MSI) images with a Random Forest (RF) algorithm. The predicted overstory, understory, and total site HCBI were validated by field-surveyed CBI. The assessment results based on simulation data showed HCBI was sensitive to the fire damage regardless of burn severity levels and vegetation cover levels (R2 of larger than 0.97 and RMSE of <0.15). The prediction results based on RF models achieved reliable HCBI of the total site, overstory, and understory levels (R2 of around 0.85 and RMSE of around 0.30). We found the wall-to-wall maps of HCBI captured the subtle horizontal and vertical variation even in the case of understory burn alone. We concluded that the newly proposed HCBI can advance the remote sensing-based assessment of stratified burn severity, offering opportunities for making fine-scale forest management decisions.

Mapping upland crop–rice cropping systems for targeted sustainable intensification in South China

Upland crop-rice cropping systems (UCR) facilitate sustainable agricultural intensification. Accurate UCR cultivation mapping is needed to ensure food security, sustainable water management, and rural revitalization. However, datasets describing cropping systems are limited in spatial coverage and crop types. Mapping UCR is more challenging than crop identification and most existing approaches rely heavily on accurate phenology calendars and representative training samples, which limits its applications over large regions. We describe a novel algorithm (RRSS) for automatic mapping of upland crop–rice cropping systems using Sentinel-1 Synthetic Aperture Radar (SAR) and Sentinel-2 Multispectral Instrument (MSI) data. One indicator, the VV backscatter range, was proposed to discriminate UCR and another two indicators were designed by coupling greenness and pigment indices to further discriminate tobacco or oilseed UCR. The RRSS algorithm was applied to South China characterized by complex smallholder rice cropping systems and diverse topographic conditions. This study developed 10-m UCR maps of a major rice bowl in South China, the Xiang-Gan-Min (XGM) region. The performance of the RRSS algorithm was validated based on 5197 ground-truth reference sites, with an overall accuracy of 91.92%. There were 7348 km2 areas of UCR, roughly one-half of them located in plains. The UCR was represented mainly by oilseed-UCR and tobacco-UCR, which contributed respectively 69% and 15% of UCR area. UCR patterns accounted for only one-tenth of rice production, which can be tripled by intensification from single rice cropping. Application to complex and fragmented subtropical regions suggested the spatiotemporal robustness of the RRSS algorithm, which could be further applied to generate 10-m UCR datasets for application at national or global scales.

Synergistic use of Sentinel-2 and UAV-derived data for plant fractional cover distribution mapping of coastal meadows with digital elevation models

Abstract. Coastal wetlands provide a range of ecosystem services, yet they are currently under threat from global change impacts. Thus, their monitoring and assessment is vital for evaluating their status, extent and distribution. Remote sensing provides an excellent tool for evaluating coastal ecosystems, whether with small-scale studies using drones or national-/regional-/global-scale studies using satellite-derived data. This study used a fine-scale plant community classification of coastal meadows in Estonia derived from a multispectral camera on board unoccupied aerial vehicles (UAVs) to calculate the plant fractional cover (PFC) in Sentinel-2 MultiSpectral Instrument (MSI) sensor grids. A random forest (RF) algorithm was trained and tested with vegetation indices (VIs) calculated from the spectral bands extracted from the MSI sensor to predict the PFC. Additional RF models were trained and tested after adding a digital elevation model (DEM). After comparing the models, results show that using DEM with VIs can increase the prediction accuracy of PFC up to 2 times (R2 58 %–70 %). This suggests the use of ancillary data such as DEM to improve the prediction of empirical machine learning models, providing an appropriate approach to upscale local studies to wider areas for management and conservation purposes.

A novel water optical types framework for Chinese inland waters with the application of multitype satellite sensor

ABSTRACT Optical Water Type (OWT) analysis is crucial for comprehending water composition and quality, key factors in assessing water quality over extensive areas. However, China’s inland waters lack a standardized system for such analysis. To quantitatively analyze the classification results, our study compared three K-means clustering methods, for analyzing 1310 spectral data from various Chinese lakes and reservoirs, thereby addressing this gap. The innovative split-merge K-means method identified 13 distinct OWTs that more closely adhere to the principles of minimizing intra-class distance and maximizing inter-class distance. These were categorized into four groups: clear water, turbid water, eutrophic water, and special type water. Additionally, we developed a method based on Spectral Angle Distance (SAD) to evaluate the classification capabilities of 12 satellite sensors. The results show that Sentinel-3 OLCI (Ocean and Land Color Instrument), MERIS (Medium Resolution Imaging Spectrometer), and Sentinel-2 MSI (Multispectral Instrument) have the best water classification capabilities, making them well-suited for large-scale monitoring of OWT changes. Conversely, other sensors, such as the Sustainable Development Scientific Satellite-1 (SDGSAT-1), Landsat-8, GaoFen-6, GaoFen-1, GaoFen-2, Landsat-5, Landsat-7, Moderate Resolution Imaging Spectroradiometer (MODIS), and HuanJing-1, necessitate the consolidation of water types for effective categorization, indicative of their more limited classification capabilities.

A Geographic Object-Based Image Approach Based on the Sentinel-2 Multispectral Instrument for Lake Aquatic Vegetation Mapping: A Complementary Tool to In Situ Monitoring

Aquatic vegetation is an essential component of lake ecosystems, used as a biological indicator for in situ monitoring within the Water Framework Directive. We developed a hierarchical object-based image classification model with multi-seasonal Sentinel-2 imagery and suitable spectral indices in order to map the aquatic vegetation in a Mediterranean oligotrophic/mesotrophic deep lake; we then applied the model to another lake with similar abiotic and biotic characteristics. Field data from a survey of aquatic macrophytes, undertaken on the same dates as EO data, were used within the accuracy assessment. The aquatic vegetation was discerned into three classes: emergent, floating, and submerged aquatic vegetation. Geographic object-based image analysis (GEOBIA) proved to be effective in discriminating the three classes in both study areas. Results showed high effectiveness of the classification model in terms of overall accuracy, particularly for the emergent and floating classes. In the case of submerged aquatic vegetation, challenges in their classification prompted us to establish specific criteria for their accurate detection. Overall results showed that GEOBIA based on spectral indices was suitable for mapping aquatic vegetation in oligotrophic/mesotrophic deep lakes. EO data can contribute to large-scale coverage and high-frequency monitoring requirements, being a complementary tool to in situ monitoring.

A novel linear spectral unmixing-based method for tree decline monitoring by fusing UAV-RGB and optical space-borne data

ABSTRACT Remote sensing-assisted monitoring of forest health entails methods that can provide up-to-date and accurate information on decline and mortality of individual trees, while maintaining time and cost efficiency. However, the trade-off of applying consumer-grade UAV-RGB data as the most affordable and accessible data source at the catchment level is constrained by its poor spectral information content. We developed a method based on the fusion of UAV-RGB data with space-borne Sentinel-2 Multispectral Instrument (MSI) at the level of tree crowns, with the specific target of supporting studies on semi-arid tree decline. We applied linear spectral unmixing (Spectral Unmixing-Based data Fusion method, LSUBF) by considering a limited number of endmembers and calculating the abundances (fractional covers) from the UAV data, and evaluated the results by high-resolution MSI space-borne data including SPOT-6 (1.5 m spatial resolution) and PlanetScope (3 m spatial resolution). This method suggested an increase in the coefficient of determination of the applied generalized additive model for decline severity estimation at tree crown level from 0.61 to 0.69, while it was improved from 0.70 to 0.91 when fitting a non-parametric random forest model. The results of sensitivity analysis demonstrated that the additional spectral information obtained from the proposed method results in higher accuracy in estimating decline severity. We suggest this method as a cost-effective alternative to monitor periodical tree decline, in particular across semi-arid ecosystems.

Temporal and Spatial Distribution of Phytoplankton and Role of Environment Factors in the Shending River Backwater in the Danjiangkou Reservoir Area

The Danjiangkou Reservoir supplies drinking water to most residents in northern China. However, signs of eutrophication have been observed in the inlet tributaries of the reservoir, including the Shending River backwater. This research used data from the Sentinel-2 Multispectral instrument and findings from a 2021 aquatic ecological survey to analyze the spatial and temporal characteristics of phytoplankton distribution in the Shending River backwater region. The average chlorophyll a (Chl-a) concentrations by season, ranked from largest to smallest, are as follows: summer (63.96 μg/L) &gt; autumn (41.26 μg/L) &gt; spring (27.47 μg/L) &gt; winter (16.21 μg/L); the upstream of the backwater area and the near-shore tributary bay had relatively higher Chl-a concentration. Bacillariophyceae (Cyclotella meneghiniana and Synedra sp.) and Cryptophyceae species (Chroomonas acuta) were dominant in spring, whereas Chlorophyceae (Scenedesmus sp. and Chlorella vulgaris) and Cyanophyceae (Dactylococcopsis acicularis, Microcystis aeruginosa and Oscillatoria tenuis) species were dominant in summer. The seasonal succession characteristics of the phytoplankton community were consistent with those of the Plankton Ecology Group model. The average phytoplankton cell density was 4.80 × 107 cells/L, and the Shannon–Wiener average diversity index was 1.95, indicating that the Shending River backwater area was moderately eutrophic. According to Pearson correlation analysis and Mantel test, the main factors causing temporal and spatial differences in phytoplankton production in the Shending River’s backwater were water level (WL), water temperature (WT), ammonia nitrogen (NH3-N) and total nitrogen (TN). In particular, WL was significantly positively correlated with Bacillariophyceae, Chlorophyceae and Cyanophyceae, whereas WT was significantly correlated with Cryptophyceae and Chlorophyceae. NH3-N and TN were significantly correlated with Cyanophyceae. Therefore, intensive nitrogen removal from the tailwater of sewage treatment plants may be considered a feasible measure to prevent cyanobacterial bloom in the Shending River backwater of the Danjiangkou Reservoir.

Monitoring global cement plants from space

As an energy-intensive industry, cement production can emit significant air pollutants that negatively impact human health and the environment. Geospatial data on cement plants are crucial for managing the cement industry and designing effective policies to mitigate ever-increasing air pollution. However, the available fundamental asset-level datasets of global cement plants are generally incomplete and may not adequately satisfy the above requirements. To address this gap, (i) we proposed an innovative semi-automatic framework, which is based on the high-temperature signal from active kilns in time-series Landsat-8 Operational Land Imager (OLI) and Sentinel-2 Multispectral Instrument (MSI) imagery and the iconic characteristics of cement processing equipment in high-resolution imagery, to identify global cement plants, assess their operational status, and evaluate relevant activity levels. (ii) We compiled a state-of-the-art inventory of global cement plants, enriched with detailed attributes, using multi-source spaceborne observations/products. We identified 3075 cement plants with rotary/shaft kilns and pinpointed 1960 locations for cement grinding and storage facilities. (iii) We investigated the status of global cement plants using time-series Sentinel-2 MSI imagery. Our results show that from 2016 to date, 69.3% of cement plants are continuously operating, 4.3% were newly constructed, and 26.4% were decommissioned. (iv) We proposed two normalized metrics, namely the occurrence rate and the mean detected area, to assess the activity level of cement plants. The results showed that the rotary kilns in wet-process cement plants had the highest activity level due to the higher energy consumption. The activity level of global cement plants increased by ∼9% during 2016–2021 and then decreased by ∼4% in 2022, possibly due to the influence of COVID-19 and weak market demand. The proposed framework provides valuable insights for investigating the locations and dynamics of other industrial hot sources, such as those in steel mills, coke ovens, refineries, and oil/gas development areas, to improve the estimates of CO2 emissions and air pollutants and then to promote climate action.

Cascading Machine Learning to Monitor Volcanic Thermal Activity Using Orbital Infrared Data: From Detection to Quantitative Evaluation

Several satellite missions are currently available to provide thermal infrared data at different spatial resolutions and revisit time. Furthermore, new missions are planned thus enabling to keep a nearly continuous ‘eye’ on thermal volcanic activity around the world. This massive volume of data requires the development of artificial intelligence (AI) techniques for the automatic processing of satellite data in order to extract significant information about volcano conditions in a short time. Here, we propose a robust machine learning approach to accurately detect, recognize and quantify high-temperature volcanic features using Sentinel-2 MultiSpectral Instrument (S2-MSI) imagery. We use the entire archive of high spatial resolution satellite data containing more than 6000 S2-MSI scenes at ten different volcanoes around the world. Combining a ‘top-down’ cascading architecture, two different machine learning models, a scene classifier (SqueezeNet) and a pixel-based segmentation model (random forest), we achieved a very high accuracy, namely 95%. These results show that the cascading approach can be applied in near-real time to any available satellite image, providing a full description of the scene, with an important contribution to the monitoring, mapping and characterization of volcanic thermal features.

Development of an algal bloom satellite and in situ metadata hub with case studies in Canada

Satellite remote sensing of algal blooms has been in use for almost five decades and has advanced with an increasing number of sensors, improvements in sensor performance, and developments in algorithms. This progress has enabled the detection and monitoring of blooms in increasingly optically complex water bodies and small lakes, and at finer spatial and temporal resolutions. With climatic and anthropogenic stressors impacting bloom occurrence, duration, and severity, it is critical to understand and characterize blooms across a wide range of spatial and temporal scales. However, resolving blooms at both fine spatial and temporal scales, and simultaneously across broad spatial extents, provides challenges to the limitations of current sensors. This study introduces the Algal Bloom Metadata Hub, an application that can be used to investigate freely available remote sensing data from contemporary satellite sensors to streamline data management and acquisition, particularly when interested in data from multiple satellite sensors. Optical sensors hosted by the hub include the Sentinel-3 Ocean and Land Colour Instrument (OLCI), Sentinel-2 MultiSpectral Instrument (MSI), LANDSAT-8 Operational Land Imager (OLI) and LANDSAT-9 OLI-2; SAR sensors include Sentinel-1, RADARSAT-2, and RADARSAT Constellation Mission (RADARSAT-CM). The application also includes an opportunity for in situ reporting of blooms, providing the potential to improve understanding of bloom occurrence distribution at a wide spatial scale. Case studies in the Western Basin of Lake Erie and Ramsey Lake in Ontario, Canada, demonstrate its utility in identifying suitable remote sensing data. Particularly in Ramsey Lake, the opportunity to leverage scenes from multiple sensors, and the integration of synthetic aperture radar (SAR) data on cloudy days, improved the temporal resolution of bloom monitoring at higher spatial resolutions. This finding was corroborated by performing an investigation into data availability for all small water bodies in Ontario. Further work can be done to integrate data from additional satellite sensors, update the application to add data in real-time, and to quality test in situ data submitted by (citizen) scientists.

Quantitative Assessment of Factors Influencing the Spatiotemporal Variation in Carbon Dioxide Fluxes Simulated by Multi-Source Remote Sensing Data in Tropical Vegetation

Vegetation plays a vital role in the global carbon cycle, a function of particular significance in regulating carbon dioxide fluxes within tropical ecosystems. Therefore, it is crucial to enhance the precision of carbon dioxide flux estimates for tropical vegetation and to explore the determinants influencing carbon sequestration. In this study, Landsat series images and Sentinel-2 Multispectral Instrument satellite data were used to invert vegetation biophysical parameters, thereby improving the timeliness and resolution of state variables from the boreal ecosystem productivity simulator (BEPS). The BEPS model at a 30 m resolution was developed to accurately capture tropical vegetation carbon dioxide fluxes across Hainan Island (HN) over the preceding two decades. The impacts of climate variations and anthropogenic activities on the carbon dioxide fluxes of tropical vegetation were further quantified using quantile regression models and a land-use transfer matrix. Results indicate significant increases in both net primary productivity (NPP) and net ecosystem productivity (NEP) in HN during the period 2000–2020, by 5.81 and 4.29 g C/m2 year, respectively. Spatial trends in vegetation carbon dioxide fluxes exhibited a consistent decline from inland regions to coastal zones. Anthropogenic activities were the dominant factor in the reduced stability of coastal NPP, while the post-2005 vegetation restoration promoted the southward expansion of high NPP (&gt;1200 g C/m2) in the central part of HN. NPP in this tropical island was more sensitive to temperature than to precipitation, with a 1 °C temperature increase resulting in 4.1 g C/m2 reduction in dry-season NPP compared to wet-season NPP. Upgrades of cropland quality and grassland restoration have improved NPP yields, and land use transfers have resulted in a 0.301 Tg C net increase in NPP. This study provides new insight into the improvement of the carbon dioxide flux model at a finer scale for tropical vegetation and highlights ecological construction as an adaptation strategy to enhance the carbon sinks of tropical vegetation under negative climate change conditions.

Tracking the behavior of an accidental oil spill and its impacts on the marine environment in the Eastern Mediterranean

The eastern Mediterranean region is a vital hub for oil transportation and production because of its strategic location between Europe, Asia, and Africa. But its unique attributes, including narrow shipping routes, heavy marine traffic, and proximity to vulnerable ecosystems, render it particularly susceptible to accidental oil spills. In this research, an oil spill detection model, along with bathymetric and oceanographic parameters, was used to track oil spills that occurred at the Syrian Baniyas Station in the Eastern Mediterranean on August 23, 2021. Furthermore, the study employed a pairwise comparison matrix (PWCM) to assess the relative importance of wind speed and direction, water depth, and sea surface temperature (SST) in the dispersion of oil spills. Analysis of Sentinel-1 data obtained prior to, during, and after the incident revealed the accumulation of oil slicks along the Syrian coast from Baniyas to Latakia for up to twenty days. The spilled oil reached the coast of Cyprus six days after the incident. The study determined that wind speed and direction played a critical role in the dispersion of spilled oil, while water depth and SST were comparatively less significant factors in this process. The overall accuracy (OA) and Kappa coefficient (KC) for land, water, and oil slick classes derived from the random forest (RF) algorithm ranged from 90 % to 98 % and from 0.86 to 0.98, respectively. The spread of oil slicks at the incident location was revealed by the decorrelation stretch and band ratios of Sentinel-2 MultiSpectral Instrument (MSI) data. The accidental oil spill could have negative effects on the organic carbon cycle, chlorophyll production, and ecosystem productivity. It is essential to consider the vulnerability of specific regions in the Eastern Mediterranean to oil spills when developing adaptation strategies.

1D Convolutional Neural Network-based Chlorophyll-a Retrieval Algorithm for Sentinel-2 MultiSpectral Instrument in Various Trophic States

1D Convolutional Neural Network-based Chlorophyll-a Retrieval Algorithm for Sentinel-2 MultiSpectral Instrument in Various Trophic States

Fusion of sentinel-1 SAR and sentinel-2 MSI data for accurate Urban land use-land cover classification in Gondar City, Ethiopia

Effective urban planning and management rely on accurate land cover mapping, which can be achieved through the combination of remote sensing data and machine learning algorithms. This study aimed to explore and demonstrate the potential benefits of integrating Sentinel-1 SAR and Sentinel-2 MSI satellite imagery for urban land cover classification in Gondar city, Ethiopia. Synthetic Aperture Radar (SAR) data from Sentinel-1A and Multispectral Instrument (MSI) data from Sentinel-2B for the year 2023 were utilized for this research work. Support Vector Machine (SVM) and Random Forest (RF) machine learning algorithms were utilized for the classification process. Google Earth Engine (GEE) was used for the processing, classification, and validation of the remote sensing data. The findings of the research provided valuable insights into the performance evaluation of the Support Vector Machine (SVM) and Random Forest (RF) algorithms for image classification using different datasets, namely Sentinel 2B Multispectral Instrument (MSI) and Sentinel 1A Synthetic Aperture Radar (SAR) data. When applied to the Sentinel 2B MSI dataset, both SVM and RF achieved an overall accuracy (OA) of 0.69, with a moderate level of agreement indicated by the Kappa score of 0.357. For the Sentinel 1A SAR data, SVM maintained the same OA of 0.69 but showed an improved Kappa score of 0.67, indicating its suitability for SAR image classification. In contrast, RF achieved a slightly lower OA of 0.66 with Sentinel 1A SAR data. However, when the datasets of Sentinel 2B MSI and Sentinel 1A SAR were combined, SVM achieved an impressive OA of 0.91 with a high Kappa score of 0.80, while RF achieved an OA of 0.81 with a Kappa score of 0.809. These findings highlight the potential of fusing satellite data from multiple sources to enhance the accuracy and effectiveness of image classification algorithms, making them valuable tools for various applications, including land use mapping and environmental monitoring.

GF-1 WFV Surface Reflectance Quality Evaluation in Countries along “the Belt and Road”

The GaoFen-1 wide field of view (GF-1 WFV) has produced level 1 digital number data globally; however, most applications have focused on China, and data quality outside China has not been validated. This study presents a preliminary assessment of the 2020 GF-1 WFV surface reflectance data for Nepal, Azerbaijan, Kenya, and Sri Lanka along “the Belt and Road” route using Sentinel-2 Multi-Spectral Instrument (MSI), Landsat-8 Operational Land Image (OLI), and Moderate Resolution Imaging Spectroradiometer (MODIS) data. A method for obtaining the GF-1 WFV surface reflectance data was also proposed, with steps including atmospheric correction, cross-radiation calibration, and bidirectional reflectance distribution function correction. The results showed that WFV surface reflectance data was not significantly different from MSI, OLI, and MODIS surface reflectance data. In the visible and near-infrared bands, for most landcover types, the bias was less than 0.02, and the precision and root mean square error were less than 0.04. When the landcover types were forest and water, the MSI, OLI, and MODIS surface reflectance data were higher than that of WFV in the near-infrared band. The results of this study provide a basis for assessing the global application potential of GF-1 WFV.

Mapping cropland rice residue cover using a radiative transfer model and deep learning

Accurate determination of rice residue cover (RRC) can improve the monitoring of tillage information. Currently, the accurate determination of RRC using optical remote sensing is hindered by variations in cropland moisture and cover of following crops. The fractional cover (FC) of the soil (fS), crop (fC), and crop residue (fCR) changes (fS + fC + fCR = 1) after the following crop is planted, which increases the difficulty of remote-sensing RRC estimation. Cropland soil moisture and crop residue moisture affect the values of cropland and crop residue spectral indices (CRSIs), thereby reducing the accuracy of remote-sensing RRC estimation. Deep learning techniques (e.g., convolutional neural networks [CNN] and transfer learning [TL]) have been proven to extract the deep features of input images with distortion invariance, such as displacement and scaling, which are similar to moisture and the following crop effects on remote-sensing CRSIs.This study aimed to evaluate the combined use of deep features of cropland spectra extracted by deep learning techniques to estimate the cropland RRC under the effects of variations in cropland moisture and cover of the following crops. This study proposes an RRCNet CNN that fuses deep and shallow features to improve RRC estimation. A PROSAIL radiative transfer model was employed to simulate a cropland “soil–crop–crop residue” mixed spectra dataset (n = 103,068), considering the variations in cropland moisture and the cover of the following crop. The RRCNet was first pre-trained using the simulated dataset, and then the knowledge from the pre-trained RRCNet was updated based on field experimental FCs, RRCs, and Sentinel-2 image spectra using the TL technique. Our study indicates that RRCNet can incorporate shallow and deep spectral features of cropland “soil–crop–crop residue” mixed spectra, providing high-performance FCs and RRC estimation. The FCs and RRC estimates from RRCNet + TL (FCs: R2 = 0.939, root mean squared error (RMSE) = 0.071; RRC: R2 = 0.891, RMSE = 0.083) were more accurate than those from CRSI + multiple linear regression, CRSI + random forest, and CRSI + support vector machine (FCs: R2 = 0.877–907, RMSE = 0.086–0.101; RRC: R2 = 0.378–0.714, RMSE = 0.133–0.229). We mapped the multistage RRC based on Sentinel-2 multispectral instrument (MSI) images and RRCNet. Tillage information can be inferred from RRC and RRC difference maps changes.