Sensor Networks Research Articles

A Q-Learning-Based Approach to Design an Energy-Efficient MAC Protocol for UWSNs Through Collision Avoidance

Deploying and effectively utilizing wireless sensor networks (WSNs) in underwater habitats remains a challenging task. In underwater wireless sensors networks (UWSNs), the availability of a continuous energy source for communicating with nodes is either very costly or is prohibited due to the marine life law enforcement agencies. So, in order to address this issue, we present a Q-learning-based approach to designing an energy-efficient medium access control (MAC) protocol for UWSNs through collision avoidance. The main goal is to prolong the network’s lifespan by optimizing the communication methods, specifically focusing on improving the energy efficiency of the MAC protocols. Factors affecting the energy consumption in communication are adjustments to the interference ranges, i.e., changing frequencies repeatedly to obtain optimal communication; data packet retransmissions in case of a false acknowledgment; and data packet collision occurrences in the channel. Our chosen protocol stands out by enabling sensor (Rx) nodes to avoid collisions without needing extra communication or prior interference knowledge. According to the results obtained through simulations, our protocol may increase the network’s performance in terms of network throughput by up to 23% when compared to benchmark protocols depending on the typical traffic load. It simultaneously decreases end-to-end latency, increases the packet delivery ratio (PDR), boosts channel usage, and lessens packet collisions by over 38%. All these gains result in minimizing the network’s energy consumption, with a proportional gain.

Fish sensor network: WSN application for fishermen

The scarcity of marine life caused by shallow waters and pollution has pushed fishermen to venture up to 10 km offshore, where clearer waters offer richer fish resources, but at much higher fuel costs. This situation has caused increased unemployment, so many fishermen have changed professions. This is exacerbated by seasonal variations and resource limitations. This research introduces a fish sensor network (FSN), which is designed to equip floating fish houses (FADs) with network-connected fish sensors. The proposed network allows fishermen to find locations with high fish populations, thereby reducing fuel costs and increasing fishing efficiency. This article presents preliminary findings, identifies potential challenges including natural factors such as wind, waves, currents, corrosion, and radio propagation, as well as man-made obstacles such as traffic density and physical measurements at the research site in Belawan, Indonesia. Additionally, this paper briefly discusses the energy availability that poses further challenges.

Resource allocation design method based on WSN multi-dimension soil inspection

Abstract. With the industrialization of agriculture and the sharp rise of food prices, in order to promote the intensive development of natural resources and achieve economies of scale agriculture in production, people put forward the innovative strategy of "precision agriculture" to maintain the sustainable development of agriculture. To protect the environment and farmer communities and increase productivity. However, in the special context of precision agriculture, the problems related to energy consumption and electromagnetic wave propagation in complex environments have a significant impact on precision agriculture. In the case of no monitoring and harsh environment, wireless sensor networks (WSN) can complete the tasks of real-time monitoring and information collection. In the past, the understanding of WSN in agriculture was limited to unilateral detection, which led to the underutilization of the soil. This paper introduces an innovative solution for precision agriculture based on wireless sensor networks, which mainly focuses on the observation and impact assessment of soil water volume,PH value, temperature and pressure in agricultural production process. It aims to reduce the waste of natural resources and the use of fertilizer substances, while maintaining or improving the yield of farming, in order to better promote the development of WSN in the agricultural field.

MACHINE LEARNING, DEEP LEARNING AND ENSEMBLE LEARNING BASED APPROACHES FOR INTRUSION DETECTION ENHANCEMENT

With the extensive application of Internet of Things and wireless sensor networks (WSNs) in various real-time fields, they have become increasingly vulnerable to several types of attacks that could have a serious impact in their functionalities. Recently, intrusion detection systems have become one of the crucial security components. We propose in this work an approach based on machine and deep learning for DoS and DDoS attack detection. We have evaluated, analyzed, and compared the efficiency of three learning models separately, including deep neural network (DNN), random forest, and decision tree, using the standard metrics of evaluation such as accuracy, precision, F1-score, and recall. In our contribution, an approach ensemble learning was introduced in order to enhance the accuracy rate of classification. Our study was carried out using two well-known benchmark and real-time datasets, CICIoT-2023 and WSN-DS, intended for wireless sensor networks and IoT. These datasets containing various types of attacks. CICIoT2023 dataset contains 33 attacks divided into 7 classes, while WSN-DS dataset contains four types of DoS attacks, including Blackhole, Grayhole, Flooding, and TDMA. The experiment result demonstrate the effectiveness of our approach in attacks detection with high accuracy achieved close to perfect. Our approach result demonstrates that using the ensemble learning technique works better than each ML architecture independently.

Improved DV-Hop algorithm based on geometric Brownian motion model under communication interference

Abstract In a mobile sensor network, a traditional positioning algorithm is unable to locate unknown nodes when losing anchor positions caused by communication interference. To solve this problem, an improved DV-Hop algorithm based on a geometric Brownian motion (GBM) model was proposed including two main stages: location of sink node (LSN) and location of blind node (LBN). In the LSN stage, if the signal transmission of anchors is normal, the GBM model records the moving positions of the anchors. If not, the GBM model predicts the estimated average positions of the anchors using recorded data. Then, the trial count of the GBM model is optimized to further improve the prediction accuracy and computational overhead. In the LBN stage, the unknown nodes’ positions are obtained by the DV-Hop algorithm. In a traditional DV-Hop algorithm, the approximate minimum hop number and average hop distance may lead to huge deviation between true position and estimated position. To improve the positioning accuracy in the LBN stage, the strategies of multi-communication radius and hop distance weighting were adopted. The simulation results demonstrated that the proposed algorithm has the capability to resist communication interference and adaptability at different node speeds , maintaining a relatively high accuracy in locating unknown nodes.

An improved energy saving clustering method for IWSN based on Gaussian mutation adaptive artificial fish swarm algorithm

The current industrial wireless sensor network (IWSN) cluster routing methods suffer from energy inefficiency. Designing efficient cluster-based routing protocols is crucial for improving network performance and energy efficiency. Therefore, this paper first designs a new clustering model to achieve efficient cluster head (CH) selection and data transmission performance by comprehensively considering multiple key factors such as CH energy, base station (BS) distance, packet loss rate, and data delay. Based on this clustering model, a novel cluster routing protocol based on Gaussian mutation adaptive artificial fish swarm algorithm (GAAFSA) is proposed. At the same time, a new Gaussian mutation strategy and an adaptive strategy were introduced to effectively promote the protocol to avoid local optima and prevent premature convergence. The GAAFSA based cluster routing protocol was experimentally compared with five popular schemes, namely CMSTR, D2CRP, EEHCHR, ESCVAD and BAFSA. The results showed that the proposed protocol outperformed the other four schemes in terms of network energy consumption, system lifetime, data transmission reliability, and latency. Specifically, GAAFSA has improved network lifespan by at least 15.68%, BS received packets by at least 7.46%, and reduced packet loss rate by at least 15.28%. Therefore, GAAFSA effectively optimizes network performance and extends network lifespan, greatly reducing energy loss within the network and significantly improving network quality of service (QoS).

An efficient neural network LEACH protocol to extended lifetime of wireless sensor networks

This paper presents NN_ILEACH, a novel neural network-based routing protocol designed to enhance the energy efficiency and longevity of Wireless Sensor Networks (WSNs). By integrating the Energy Hole Removing Mechanism (EHORM) with a sophisticated neural network for cluster head selection, NN_ILEACH effectively addresses the energy depletion challenges associated with traditional protocols like LEACH and ILEACH. Our extensive simulations demonstrate that NN_ILEACH significantly outperforms these classical protocols. Specifically, NN_ILEACH extends the network lifetime to an impressive 11,361 rounds, compared to only 505 rounds achieved by LEACH under identical conditions—representing a more than 20-fold improvement. Additionally, NN_ILEACH achieves a 30% increase in throughput and a 25% enhancement in packet delivery ratio, while reducing overall energy consumption by 40%. These results underscore the protocol’s potential to optimize energy usage and maintain network stability, paving the way for more resilient IoT systems in dynamic environments. Future work will explore further integration of machine learning techniques to enhance adaptability and performance in WSNs.

Selective hypothesis testing in cognitive IoT sensor network

Selective hypothesis testing in cognitive IoT sensor network

ExAq-MSPP: An Energy-Efficient Mobile Sink Path Planning Using Extended Aquila Optimization Algorithm

Wireless sensor networks play a crucial role in gathering data from remote or hard-to-reach locations, enabling real-time monitoring and decision-making in a wide range of industries and applications. The mobile sink path planning (MSPP) enables mobile sinks (e.g., drones or rovers) to navigate through the environment, collecting data from different sensor nodes, ensuring comprehensive coverage, and adaptively addressing changing conditions. Still, the energy-efficient routing with minimal delay is the challenging aspect. This research focuses on improving data gathering in wireless sensor networks by introducing an efficient routing protocol. In this proposed protocol, sensor nodes are initially deployed using Voronoi diagrams to ensure uniform network coverage. The network is then divided into clusters using the low-energy adaptive clustering hierarchy (LEACH) algorithm for energy-efficient routing. To optimize the path planning of a mobile sink for data collection, we introduce the extended Aquila (ExAq) optimization algorithm, which uses a multi-objective fitness function considering factors such as delay, residual energy, link quality, priority, and distance. Simulation results demonstrate the effectiveness of the proposed ExAq-MSPP protocol in terms of reduced delay, improved network lifetime, higher packet delivery ratio, enhanced residual energy, and increased throughput compared to existing protocols with the values of 1.169, 99.857, 99.920, 0.997, and 255.306, respectively. Thus, the energy-efficient routing and optimizing path planning for mobile sinks, the proposed ExAq-MSPP protocol can extend network lifetime, increase data accuracy, and provide more robust performance under changing environmental conditions.

Distributed correntropy Kalman filtering over sensor networks with FlexRay-based protocols

Distributed correntropy Kalman filtering over sensor networks with FlexRay-based protocols

Automation in Greenhouse using IoT

This work provides an IoT-based plant monitoring system for avoiding over-exploitation of resources, ensuring compact design with easy installation and the best environment for the plants to grow. This type of agricultural monitoring system provides environmental monitoring services that help the crop grow in good shape. The system offers the service of storing a database about the environment and soil information acquired from a wireless sensor network deployed in the planted area. Furthermore, it enables users to track environmental data regarding planted crops in real-time using any Internet-enabled device. Our project introduces automatic sunlight prevention and soil moisture control based on data received from the moisture and temperature sensors. The proposed work is implemented using a microcontroller, programmed accordingly to measure the temperature and moisture using respective sensors. It is well capable of controlling temperature by operating a fan, controlling a shade for blocking excess sunlight and controlling moisture by operating a watering device through a motor. The potential outcome of the project work can be used for greenhouse

Effectual Energy Optimization Stratagems for Wireless Sensor Network Collections Through Fuzzy-Based Inadequate Clustering

Effectual Energy Optimization Stratagems for Wireless Sensor Network Collections Through Fuzzy-Based Inadequate Clustering

Energy‐Aware Routing in WSN Utilizing Self‐Attention–Based Cycle‐Consistent Generative Adversarial Network With Honey Badger Algorithm

ABSTRACTEnergy efficiency and secure data transmission are considered as the main design targets of wireless sensor network (WSN). Previous energy‐aware cluster head (CH) selection approaches could not provide secured data transmission. To address this problem, a self‐attention–based cycle‐consistent generative adversarial network (SaCyCsGAN) with honey badger algorithm (HyBA)–adopted energy‐aware routing (EgAR) in WSN is proposed. Initially, the proposed system uses a CH to carry out the routing practice. Accordingly, SaCyCsGAN classifier is exploited for CH selection under firm fitness function: delay, distance, energy, cluster density, and traffic rate. Afterward CH selection, a spiteful node may enter the cluster and acts as a CH. Hence, best path selection is needed. For that, HyBA is utilized, it selects the best path depending upon triplet parameter: trust, connectivity, and service degree. Finally, data are conveying into base station (BS) and vice versa under best path. Finally, the proposed EgAR‐WSN‐SaCyCsGAN‐HyBA method attains 24.13%, 28.57%, 5.88%, and 20.37% higher throughput and 18.50%, 21.67%, 13.33%, and 22.22% lesser energy consumption evaluated to the existing methods such as multiple‐objective CH utilizing self‐attention basis progressive generative adversarial network for safe data aggregation (EgAR‐WSN‐SAPrGAN‐ArVOA), reinforcement learning–based energy‐efficient optimized routing protocol in WSN (EgAR‐WSN‐RLGT‐BCSA), data aggregation including clustering protocol in WSN under machine learning (EgAR‐WSN‐AfNN), and optimum cluster along trusted path for routing formation with categorization of intrusion under machine learning categorization (EgAR‐WSN‐RsBPDT‐HoCSOA).

Hamming distances of unsaturated orthogonal arrays

Orthogonal arrays (OAs) are applied in the statistical design of experiments, coding theory, cryptography, various types of software testing and quality control and have many connections to other combinatorial designs. The Hamming distances of OAs play a critical role in many areas such as algebraic combinatorics, quantum information theory, and wireless sensor networks. However, the calculation method of Hamming distances is difficult, especially for mixed orthogonal arrays (MOAs), since they rely on constructions or structures of OAs in many cases. In this article, by using the number of coincidences, we find some OAs with high strength and MOAs with strength 2 and 3, whose Hamming distances do not depend on their structures. We also calculate Hamming distances of a series of unsaturated asymmetrical OAs via their construction methods such as deleting columns, the expansive replacement method, and difference schemes.

Iot-Integrated Wireless Sensor Networks For Smart Environments

Iot-Integrated Wireless Sensor Networks For Smart Environments

Admission Allotment Scheme Base Load Balancing Techniques for Clustering Routing in Wireless Sensor Network

Admission Allotment Scheme Base Load Balancing Techniques for Clustering Routing in Wireless Sensor Network

An energy-aware protocol in wireless sensor networks using the scattered search algorithm and fuzzy logic.

Given the resource limitations of wireless sensor networks (WSNs), energy conservation is of utmost importance. Moreover, minimizing data collection delays is crucial to maintaining data freshness. Additionally, it is desirable to increase the number of collected data samples to enhance accuracy and robustness in data collection. For this purpose, this research article proposes a clustering-based routing protocol aimed at maximizing the delivery of data samples while minimizing energy consumption and data collection delays. The protocol employs a scattered search algorithm and fuzzy logic to cluster the sensor nodes. By considering the distance to the sink and the remaining energy level of the battery, the network is dynamically divided into clusters using a lightweight clustering approach. To evaluate the effectiveness of the proposed method, simulations were conducted in OPNET using the AFSRP protocol. The results demonstrate superior performance of the proposed method in terms of end-to-end delay by 13.44%, media access delay by 75.2%, throughput rate by 20.55%, energy consumption by 13.52%, signal-to-noise ratio by 43.40% and delivery rate of successfully sending data to the sink is 0.21% higher than the well-known AFSRP method.

Formulation of Envelope Correlation Coefficient for Multiple Sensors Based on Scattering Parameter

The Envelope Correlation Coefficient (ECC) is crucial for assessing multiple sensor systems in wireless communication, sensing, and microwave imaging. ECC measures signal similarity between sensors, with higher values (close to 1.00) indicating strong correlation. Efficient power transmission, reception, and multiband path transmission enhance sensor network performance by improving data rates and reliability through multiple frequency bands. This study uses scattering parameters to calculate ECC for four different sensors in a single arrangement. Most of the sensors exhibit higher correlation at f2 and f3, while f1 shows a low ECC.

Performance Analysis of Wireless Sensor Networks Using Damped Oscillation Functions for the Packet Transmission Probability

Wireless sensor networks are composed of many nodes distributed in a region of interest to monitor different environments and physical variables. In many cases, access to nodes is not easy or feasible. As such, the system lifetime is a primary design parameter to consider in the design of these networks. In this regard, for some applications, it is preferable to extend the system lifetime by actively reducing the number of packet transmissions and, thus, the number of reports. The system administrator can be aware of such reporting reduction to distinguish this final phase from a malfunction of the system or even an attack. Given this, we explore different mathematical functions that drastically reduce the number of packet transmissions when the residual energy in the system is low but still allow for an adequate number of transmissions. Indeed, in previous works, where the negative exponential distribution is used, the system reaches the point of zero transmissions extremely fast. Hence, we propose different dampening functions with different decreasing rates that present oscillations to allow for packet transmissions even at the end of the system lifetime. We compare the system performance under these mathematical functions, which, to the best of our knowledge, have never been used before, to find the most adequate transmission scheme for packet transmissions and system lifetime. We develop an analytical model based on a discrete-time Markov chain to show that a moderately decreasing function provides the best results. We also develop a discrete event simulator to validate the analytical results.

Hybrid secure routing and monitoring mechanisms in IoT-based wireless sensor networks using Egret-Harris optimization

ABSTRACT Security is the primary concern when creating security protocols for wireless sensor networks (WSN), which motivates many academics to find security solutions that effectively provide a few benefits, such as low consumption of electricity, flexible communication, and low cost. A few restrictions still remain, including the inability to exactly select the expected cluster, the sensor nodes’ constrained functionality, and their poor efficiency. Thus, Egret-Harris optimization for hybrid secure routing and monitoring mechanisms in IoT-based WSNs (EHO optimized routing protocol in WSN) was introduced in this research. The created EHO algorithm combines the search, fitness function, and hunting phase features from Harris hawks and egrets to determine the best solution among all practical solutions while ensuring safe data transfer from the cluster heads (CHs) to the Base station (BS). Specifically, the EHO-enabled clustering is applied to the suggested model to efficiently choose the ideal group of CHs. Additionally, the EHO algorithm assists in choosing the best possible routes with minimal distance and less delay for facilitating energy-efficient transmission. With 100 nodes analyzed, the suggested EHO-WSN approach without any attacks achieved 22 alive nodes, a delay of 0.10 ms, a normalized energy of 0.346J, and a throughput of 0.64 bps, respectively. Additionally, in the presence of a Sybil attack, the suggested EHO-WSN technique achieves 14, 0.214 J, 0.010 ms, and 0.512 bps for an analysis involving 100 nodes. Compared to previous methods, the suggested EHO-WSN model without attack achieves a delay of 0.07 ms, a throughput of 0.30 bps, an energy of 0.374 J, and 37 alive nodes for 200 node evaluation. For 200 nodes under examination, the EHO-WSN technique yields superior results of attaining 12 alive nodes, a delay of 0.072 ms, a throughput of 0.181 bps, and a normalized energy of 0.330 J even in the presence of the Sybil attack and exceeded other traditional techniques.