Sensitizer Molecules Research Articles

Effects of electron trapping and protonation on the efficiency of water-splitting dye-sensitized solar cells.

Water-splitting dye-sensitized photoelectrochemical (WS-DSPECs) cells employ molecular sensitizers to absorb light and transport holes across the TiO2 surface to colloidal or molecular water oxidation catalysts. As hole diffusion occurs along the surface, electrons are transported through the mesoporous TiO2 film. In this paper we report the effects of electron trapping and protonation in the TiO2 film on the dynamics of electron and hole transport in WS-DSPECs. When the sensitizer bis(2,2'-bipyridine)(4,4'-diphosphonato-2,2'-bipyridine)ruthenium(II) is adsorbed from aqueous acid instead of from ethanol, there is more rapid hole transfer between photo-oxidized sensitizer molecules that are adsorbed from strong acid. However, the photocurrent and open-circuit photovoltage are dramatically lower with sensitizers adsorbed from acid because intercalated protons charge-compensate electron traps in the TiO2 film. Kinetic modeling of the photocurrent shows that electron trapping is responsible for the rapid electrode polarization that is observed in all WS-DSPECs. Electrochemical impedance spectroscopy suggests that proton intercalation also plays an important role in the slow degradation of WS-DSPECs, which generate protons at the anode as water is oxidized to oxygen.

Kinetics of the Regeneration by Iodide of Dye Sensitizers Adsorbed on Mesoporous Titania

Regeneration of dye sensitizer molecules by reducing species contained in the electrolyte is a key mechanism in liquid dye-sensitized solar cells because it competes kinetically with a detrimental charge recombination process. Kinetics of the reduction by iodide ions of the oxidized states (S+) of two RuII complex dyes and four organic π-conjugated bridged donor–acceptor sensitizers were examined as a function of the electrolyte concentration. Results show that two different cases can be distinguished. A sublinear behavior of the regeneration rate and a plateau value reached at high bulk iodide concentrations were found for N820 ruthenium dye and interpreted as being due to an associative interaction involving the formation of (S+, I–)···I– surface complexes prior to the reaction. On the other hand, feeble reaction rates at low electrolyte concentrations and a superlinear behavior are observed predominantly for the organic dyes, pointing to a repulsive interaction between the dyed surface and iodide anion...

Encapsulation of Hydrophobic Phthalocyanine with Poly(N-isopropylacrylamide)/Lipid Composite Microspheres for Thermo-Responsive Release and Photodynamic Therapy.

Phthalocyanine (Pc) is a type of promising sensitizer molecules for photodynamic therapy (PDT), but its hydrophobicity substantially prevents its applications. In this study, we efficiently encapsulate Pc into poly(N-isopropylacrylamide) (pNIPAM) microgel particles, without or with lipid decoration (i.e., Pc@pNIPAM or Pc@pNIPAM/lipid), to improve its water solubility and prevent aggregation in aqueous medium. The incorporation of lipid molecules significantly enhances the Pc loading efficiency of pNIPAM. These Pc@pNIPAM and Pc@pNIPAM/lipid composite microspheres show thermo-triggered release of Pc and/or lipid due to the phase transition of pNIPAM. Furthermore, in the in vitro experiments, these composite particles work as drug carriers for the hydrophobic Pc to be internalized into HeLa cells. After internalization, the particles show efficient fluorescent imaging and PDT effect. Our work demonstrates promising candidates in promoting the use of hydrophobic drugs including photosensitizers in tumor therapies.

Quantum entanglement in photoactive prebiotic systems.

This paper contains the review of quantum entanglement investigations in living systems, and in the quantum mechanically modelled photoactive prebiotic kernel systems. We define our modelled self-assembled supramolecular photoactive centres, composed of one or more sensitizer molecules, precursors of fatty acids and a number of water molecules, as a photoactive prebiotic kernel systems. We propose that life first emerged in the form of such minimal photoactive prebiotic kernel systems and later in the process of evolution these photoactive prebiotic kernel systems would have produced fatty acids and covered themselves with fatty acid envelopes to become the minimal cells of the Fatty Acid World. Specifically, we model self-assembling of photoactive prebiotic systems with observed quantum entanglement phenomena. We address the idea that quantum entanglement was important in the first stages of origins of life and evolution of the biospheres because simultaneously excite two prebiotic kernels in thesystem by appearance of two additionalquantum entangled excited states, leading to faster growth and self-replication of minimal living cells. The quantum mechanically modelled possibility of synthesizing artificial self-reproducing quantum entangled prebiotic kernel systems and minimal cells also impacts the possibility of the most probable path of emergence of protocells on the Earth or elsewhere. We also examine the quantum entangled logic gates discovered in the modelled systems composed of two prebiotic kernels. Such logic gates may have application in the destruction of cancer cells or becoming building blocks of new forms of artificial cells including magnetically active ones.

Spectroscopy of Donor−π–Acceptor Porphyrins for Dye-Sensitized Solar Cells

A recent improvement in the design of dye-sensitized solar cells has been the combination of light-absorbing, electron-donating, and electron-withdrawing groups within the same sensitizer molecule. This dye architecture has proven to increase the energy conversion efficiency of the cells, leading to record efficiency values. Here we investigate a zinc(II)-porphyrin-based dye with triphenylamine donor groups and carboxyl linkers for the attachment to an oxide acceptor. The unoccupied energy levels of these three moieties are probed selectively by element-sensitive X-ray absorption spectroscopy at the K-edges of nitrogen and carbon. These results are complemented by ultraviolet/visible spectroscopy to obtain the optical band gap and the occupied molecular levels. Density functional theory and time-dependent density functional theory are employed to obtain a detailed understanding of the X-ray and optical absorption spectra. The attachment of electron-donating groups to the porphyrin ring significantly delocalizes the highest occupied molecular orbital (HOMO) of the molecule. This leads to a spatial separation between the HOMO and the lowest unoccupied molecular orbital (LUMO), with the HOMO having significant weight in the amine donors, while the LUMO remains localized in the porphyrin ring and the acceptor group. Such spatial separation of the frontier orbitals reduces the recombination rate of photoinduced electrons and holes, thus enhancing the energy conversion efficiency.

A Fiberoptic (Photodynamic Therapy Type) Device with a Photosensitizer and Singlet Oxygen Delivery Probe Tip for Ovarian Cancer Cell Killing

A portable "fiber optic-based sensitizer delivery" (FOSD) device has been developed and studied. Before there might be success in photodynamic therapy (PDT) and antibacterial ambitions, an understanding of basic factors on device performance was needed. Thus, the device was examined for the localized delivery of sensitizer molecules in ovarian cancer cells and production of high concentrations of singlet oxygen for their eradication in vitro. The device tip releases stored pheophorbide by attack of singlet oxygen from sensitized oxygen gas delivered through the hollow fiber using 669 nm laser light. The performance of the device was enhanced when configured with a fluorosilane tip by virtue of its Teflon-like property compared with a conventional glass tip (greater sensitizer quantities were photoreleased and laterally diffused, and greater amounts of ovarian OVCAR-5 cancer cells were killed). No cell damage was observed at 2.2 N of force applied by the probe tip itself, an amount used for many of the experiments described here.

Gelled oil particles: A new approach to encapsulate a hydrophobic metallophthalocyanine

Chloroaluminum phthalocyanine (ClAlPc) is a promising sensitizer molecule for photodynamic therapy, but its hydrophobicity makes it difficult to formulate. In this study, we have efficiently encapsulated ClAlPc into gelled soybean oil particles dispersed in water. 12-Hydroxystearic acid (HSA) and polyethyleneimine (PEI) were the gelling and stabilizing agents, respectively. The preparation process involved hot emulsification above the gelation temperature (Tgel), followed by cooling to room temperature, which gave a colloidal dispersion of gelled particles of oil in aqueous medium. The gelled particles containing ClAlPc had a medium diameter of 280nm, homogeneous size distribution (polydispersity index ≈0.3) and large positive zeta potential (about +50mV) and showed a spherical morphology. The gelled oil particle formulations exhibited good physical stability over a 6-month period. ClAlPc interfered with the HSA self-assembly only slightly, and decreased the gelation temperature to a small extent; however it did not affect gelation process of the oil droplets. The amounts of PEI and HSA employed during the preparation allowed us to control particle size and the dispersion stability, a phenomenon that results from complex electrostatic interactions between the positively charged PEI and the negatively charged HSA fibers present on the gelled particles surface. In summary, by using the right ClAlPc, HSA, and PEI proportions, we prepared very stable dispersions of gelled soybean oil particles with excellent ClAlPc encapsulation efficiency. The obtained colloidal formulation of gelled oil particles loaded with ClAlPc shall be very useful for photodynamic therapy protocols.

Kinetics of Photon Upconversion in Ionic Liquids: Energy Transfer between Sensitizer and Emitter Molecules

The efficiency of triplet-sensitized photon upconversion in ionic liquids was previously found to be dependent on the type of ionic liquid employed. The properties of the intermolecular energy transfer need to be understood in order to improve the upconversion efficiency. Here, we investigate the kinetics of the triplet energy transfer from the triplet sensitizing molecule to the emitter molecule where the latter is responsible for delayed upconversion fluorescence emission. The collision kinetics between the sensitizer and emitter molecules in imidazolium ionic liquids are investigated by systematically changing the alkyl chain length of the ionic liquid cation. Stern-Volmer analysis reveals unique diffusion behavior of the solute molecules in ionic liquids, and this observation is attributed to the microheterogeneity of the ionic liquids. Through time-resolved transient absorption measurements and determination of the triplet-triplet absorption coefficient of the sensitizer molecule used, we find that the quantum efficiency of the triplet energy transfer in the present system is sufficiently high (ca. 0.75) and independent of the type of ionic liquid. These findings show that the ionic liquid dependence of the upconversion efficiency arises from the later processes pertaining to the emitter molecule rather than the triplet energy transfer process.

Phenomenon of quantum entanglement in a system composed of two minimal protocells.

The quantum mechanical self-assembly of two separate photoactive supramolecular systems with different photosynthetic centers was investigated by means of density functional theory methods. Quantum entangled energy transitions from one subsystem to the other and the assembly of logically controlled artificial minimal protocells were modeled. The systems studied were based on different photoactive sensitizer molecules covalently bonded to a non-canonical oxo-guanine::cytosine supramolecule with the precursor of a fatty acid (pFA) molecule attached via Van der Waals forces, all surrounded by water molecules. The electron correlation interactions responsible for the weak hydrogen and Van der Waals chemical bonds increased due to the addition of polar water solvent molecules. The distances between the separated sensitizer, nucleotide, pFA, and water molecules are comparable to Van der Waals and hydrogen bonding radii. As a result, the overall system becomes compressed, resulting in photo-excited electron tunneling from the sensitizer (bis(4-diphenylamine-2-phenyl)-squarine or 1,4-bis(N,N-dimethylamino)naphthalene) to the pFA molecules. Absorption spectra as well as electron transfer trajectories associated with the different excited states were calculated using time dependent density functional theory methods. The results allow separation of the quantum entangled photosynthetic transitions within the same minimal protocell and with the neighboring minimal protocell. The transferred electron is used to cleave a "waste" organic molecule resulting in the formation of the desired product. A two variable, quantum entangled AND logic gate was proposed, consisting of two input photoactive sensitizer molecules and one output (pFA molecule). It is proposed that a similar process might be applied for the destruction of tumor cancer cells or to yield building blocks in artificial cells.

Nonlinear Amplification of a Supramolecular Complex at a Multivalent Interface

Competition with a monovalent cyclodextrin host (blue cones) in solution drives the multivalent binding of a Eu(3+) complex and a sensitizer molecule to cyclodextrin monolayers through a nonlinear self-assembly process. Adamantyl groups (light-blue spheres) are attached to the EDTA ligand (black) and the antenna molecule (orange), which has a carboxylate group for coordination to the Eu(3+) ion (yellow or red in free or complexed form, respectively).

Fluorine End-Capped Optical Fibers for Photosensitizer Release and Singlet Oxygen Production

The usefulness of a fiber optic technique for generating singlet oxygen and releasing the pheophorbide photosensitizer has been increased by the fluorination of the porous Vycor glass tip. Singlet oxygen emerges through the fiber tip with 669-nm light and oxygen, releasing the sensitizer molecules upon a [2 + 2] addition of singlet oxygen with the ethene spacer and scission of a dioxetane intermediate. Switching from a nonfluorinated to a fluorinated glass tip led to a clear reduction of the adsorbtive affinity of the departing sensitizer with improved release into homogeneous toluene solution and bovine tissue, but no difference was found in water since the sensitizer was insoluble. High surface coverage of the nonafluorohexylsilane enhanced the cleavage efficiency by 15% at the ethene site. The fluorosilane groups also caused crowding and seemed to reduce access of (1)O(2) to the ethene site, which attenuated the total quenching rate constant k(T), although there was less wasted (1)O(2) (from surface physical quenching) at the fluorosilane-coated than the native SiOH silica. The observations support a quenching mechanism that the replacement of the SiOH groups for the fluorosilane C-H and C-F groups enhanced the (1)O(2) lifetime at the fiber tip interface due to less efficient electronic-to-vibronic energy transfer.

Ultrafast Photoinduced Electron Transfer at Electrodes: The General Case of a Heterogeneous Electron‐Transfer Reaction

The general case of a heterogeneous electron-transfer reaction is realized by ultrafast electron transfer from a light-absorbing molecule to a wide continuum of electronic acceptor states, realizing the so-called wide band limit. Experimental data obtained for perylene dye/TiO(2) systems confirm the predictions of fully quantum mechanical model calculations of the dynamics. The energy distribution of the injected electron shows an energy loss due to excitations of high-energy (quantum) vibrational modes in the ionized perylene moiety. The electron-transfer mechanism is non-adiabatic and the reaction is ultrafast, for example, with a time constant of 9 fs for the COOH anchor-bridge group. The underlying strong coupling of the electronic states to high-energy vibrational modes is a characteristic feature of sensitizer molecules.

Diffusion-controlled sensitization of photocleavage reactions on surfaces

The kinetic rate equation for the photosensitized cleavage reaction of surface-bound photolabile chromophores with free diffusion of sensitizer molecules from the bulk of a solution to the surface is derived by determining the stationary solution of a diffusion equation with suitable boundary conditions. The relation between the phenomenological rate constant for the photosensitized reaction at the surface and in the bulk is established. Applying the result to the analysis of an experimental example, the origin of the quasi zeroth-order kinetics of the sensitized reaction is revealed. A theoretical comparison of intramolecular sensitization in photocleavable protecting groups with a molecular antenna and sensitization with the freely diffusing sensitizer shows that in a typical case sensitization with free diffusion is more effective than intramolecular sensitization for sensitizer concentrations higher than 5 mM.

Quantum Entangled Photosynthesis and OR Logic Gates Controlling Minimal Artificial Cell

Density functional theory methods were used to investigate self-assembled photoactive bioorganic system of interest for logically controlled artificial minimal cell. The cell system studied is based on cytosine and noncanonical oxo-guanine nucleobases and consisted of up to 366 atoms and are up to 2.5 nm in diameter. The electron correlation interactions responsible for the weak hydrogen and Van der Waals chemical bonds increase due to the addition of a polar water solvent molecules. The distances between the separated sensitizer, nucleobase, fatty acid precursor, and water molecules are comparable to Van der Waals and hydrogen bonding radii. As a result the associated electron correlation interactions compress the overall system resulting in an even smaller gap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) electron energy levels and photoexcited electron tunneling occurs from the sensitizer (bis(4diphenylamine-2-phenyl)-squarine and 1,4-bis(N,N-dimethylamino)naphthalene) to the precursor fatty acid, or to the cytosine molecules. Analysis of time dependent density functional theory method calculated absorption spectrum and images of electron transfer trajectories in the different excited states allow to separate quantum entangled photosynthetic transitions or destruction of 8-oxoguanine::cytosine supramolecule. Two variable quantum OR logic gate consists of three subsystems: two photoactive sensitizer molecules and 8-oxo-guanine::cytosine supramolecule (or pFA) molecule, i. e. containing two different variable inputs and two different outputs.

High efficiency dye-sensitized solar cells exploiting sponge-like ZnO nanostructures

Sponge-like nanostructured ZnO layers were successfully employed as photoanodes for the fabrication of highly efficient dye-sensitized solar cells. The sponge-like ZnO layers were obtained by room temperature radio-frequency magnetron sputtering deposition of metallic zinc, followed by thermal oxidation treatment in an ambient atmosphere. The porous films show a 3D branched nanomorphology, with a feature similar to natural coral. The morphological and optical properties of these layers were studied through field emission scanning electron microscopy, specific surface area measurements, ultraviolet-visible transmittance and absorption spectroscopy. The sponge-like ZnO film presents a high density of branches, with a relatively high specific surface area value, and fine optical transmittance. The morphology of the porous structure provides a high number of adsorption sites for the anchoring of sensitizer molecules, making it suitable for the fabrication of ZnO-based photoanodes for dye-sensitized solar cells. The light harvesting performance of the sensitized semiconductor was evaluated by current density vs. voltage measurements, incident photon-to-electron conversion efficiency, open circuit voltage decay and impedance spectroscopy. The modelling of the electrical characteristics evidences a higher electron lifetime and a longer charge diffusion length, if compared to standard TiO(2) nanoparticle based photoanodes. For ZnO films with a thickness up to 18 μm, a photoconversion efficiency as high as 6.67% and a maximum value of the incident photon-to-electron collection efficiency equal to 87% at 530 nm were demonstrated.

Comparison of D-SS and D-ST Dyes as Photo Sensitizers in Dye-Sensitized Solar Cells

为了揭示D-SS和D-ST分子敏化的染料敏化太阳能电池（DSSCs）的物理机制,采用密度泛函理论（DFT）、含时密度泛函理论（TDDFT）和自然键轨道（NBO）分析,模拟计算染料D-SS和D-ST分子的结构、紫外-可见吸收光谱和能级结构.D-SS的紫外-可见吸收光谱相比于D-ST的有明显的红移,而且D-SS分子的摩尔吸光系数也高于D-ST分子的.D-SS分子本应该比D-ST分子拥有更高的俘获太阳辐射光子的能力,但由于D-SS分子的最高占据分子轨道（HOMO）能级位置比氧化还原电解质（I-/I-3）的氧化还原能级高,处于光激发态的D-SS分子向TiO2电极注入电子而被氧化后,不能顺利地从电解质中得到电子而还原,使得D-SS分子俘获光子的能力不能充分发挥,从而严重地降低了由其敏化的DSSCs的光电性能和光电能量转换效率.揭示了D-SS敏化的DSSCs的光电性能,特别是光电能量转换效率比D-ST敏化的DSSCs的低的原因.染料敏化剂分子的HOMO能级的位置对于DSSCs来说也是很重要的,用于DSSCs的有机敏化剂分子的HOMO能级的位置必须低于氧化还原电解质的氧化还原能级.

One‐pot direct synthesis of fluorescent polyaniline‐porphyrin macrospheres from porphyrin

AbstractPorphyrins are very important chromophores as sensitizer in solar cell. Hole and electron transport layers are being used as an important layer to move the electrons and holes away from the sensitizer molecule to electrodes. In this work, a simple process has been developed for the synthesis of one layer combination of sensitizer and hole transport, that is, polyaniline‐porphyrin (PANI‐TPPS4) system as a bulk heterojunction. Macrospheres of fluorescent PANI‐TPPS4 materials were synthesized by one‐pot as well as two step processes directly from porphyrin for the first time. The advantage of this process is no need to isolate sulfonated porphyrin (TPPS4), which is a difficult process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012

Long-Lived Room Temperature Deep-Red/Near-IR Emissive Intraligand Triplet Excited State (3IL) of Naphthalimide in Cyclometalated Platinum(II) Complexes and Its Application in Upconversion

[C(^)NPt(acac)] (C(^)N = cyclometalating ligand; acac = acetylacetonato) complexes in which the naphthalimide (NI) moiety is directly cyclometalated (NI as the C donor of the C-Pt bond) were synthesized. With 4-pyrazolylnaphthalimide, isomers with five-membered (Pt-2) and six-membered (Pt-3) chelate rings were obtained. With 4-pyridinylnaphthalimide, only the complex with a five-membered chelate ring (Pt-4) was isolated. A model complex with 1-phenylpyrazole as the C(^)N ligand was prepared (Pt-1). Strong absorption of visible light (ε = 21,900 M(-1) cm(-1) at 443 nm for Pt-3) and room temperature (RT) phosphorescence at 630 nm (Pt-2 and Pt-3) or 674 nm (Pt-4) were observed. Long-lived phosphorescences were observed for Pt-2 (τ(P) = 12.8 μs) and Pt-3 (τ(P) = 61.9 μs). Pt-1 is nonphosphorescent at RT in solution because of the acac-localized T(1) excited state [based on density functional theory (DFT) calculations and spin density analysis], but a structured emission band centered at 415 nm was observed at 77 K. Time-resolved transient absorption spectra and spin density analysis indicated a NI-localized intraligand triplet excited state ((3)IL) for complexes Pt-2, Pt-3, and Pt-4. DFT calculations on the transient absorption spectra (T(1) → T(n) transitions, n > 1) also support the (3)IL assignment of the T(1) excited states of Pt-2, Pt-3, and Pt-4. The complexes were used as triplet sensitizers for triplet-triplet-annihilation (TTA) based upconversion, and the results show that Pt-3 is an efficient sensitizer with an upconversion quantum yield of up to 14.1%, despite its low phosphorescence quantum yield of 5.2%. Thus, we propose that the sensitizer molecules at the triplet excited state that are otherwise nonphosphorescent were involved in the TTA upconversion process, indicating that weakly phosphorescent or nonphosphorescent transition-metal complexes can be used as triplet sensitizers for TTA upconversion.

아연필름의 수용액내 직접산화를 통한 산화아연 나노막대 전극의 제조

The latterhas been regarded economically more adequate for large-area production with low energy consumption, especiallyfor the application of dye-sensitized solar cells (DSC).Due to the high crystallinity of individual ZnO nanorodswhich enables the enhancement of the charge transportproperties of injected electrons into ZnO matrix from thephoto-excited sensitizer molecules, ZnO nanorod arrayelectrode has shown the energy conversion efficiency ashigh as 1.5%

Characteristic features of charge transfer in the interaction between sensitizer molecules and AgCl(I) molecules

We have used flash luminescence stimulation and photoinduced emission methods to study deep impurity states of AgCl(I) microcrystals with adsorbed organic cationic and anionic dye molecules. We have observed that when these molecules interact with the crystal, charge transfer occurs simultaneously from different orbitals and the transfer occurs differently from each orbital: some orbitals of the molecule pick up a negative charge, others at the same time give up a negative charge. We hypothesize that the type of transfer is determined by the overall charge.