Sensitive Strains Research Articles

Comparative Metabolomics Reveals Changes in the Metabolic Pathways of Ampicillin- and Gentamicin-Resistant Staphylococcus aureus.

Antibiotic resistance is a major global challenge requiring new treatments and a better understanding of the bacterial resistance mechanisms. In this study, we compared ampicillin-resistant (R-AMP) and gentamicin-resistant (R-GEN) Staphylococcus aureus strains with a sensitive strain (ATCC6538) using metabolomics. We identified 109 metabolites; 28 or 31 metabolites in R-AMP or R-GEN differed from those in ATCC6538. Moreover, R-AMP and R-GEN were enriched in five and four pathways, respectively. R-AMP showed significantly up-regulated amino acid metabolism and down-regulated energy metabolism, whereas R-GEN exhibited an overall decrease in metabolism, including carbohydrate, energy, and amino acid metabolism. Furthermore, the activities of the metabolism-related enzymes pyruvate dehydrogenase and TCA cycle dehydrogenases were inhibited in antibiotic-resistant bacteria. Significant decreases in NADH and ATP levels were also observed. In addition, the arginine biosynthesis pathway, which is related to nitric oxide (NO) production, was enriched in both antibiotic-resistant strains. Enhanced NO synthase activity in S. aureus promoted NO production, which further reduced reactive oxygen species, mediating the development of bacterial resistance to ampicillin and gentamicin. This study reveals that bacterial resistance affects metabolic profile, and changes in energy metabolism and arginine biosynthesis are important factors leading to drug resistance in S. aureus.

Functional and practical insights into three lactococcal antiphage systems.

The persistent challenge of phages in dairy fermentations requires the development of starter cultures with enhanced phage resistance. Recently, three plasmid-encoded lactococcal antiphage systems, named Rhea, Aristaios, and Kamadhenu, were discovered. These systems were found to confer high levels of resistance against various Skunavirus members. In the present study, their effectiveness against phage infection was confirmed in milk-based medium, thus validating their potential to ensure reliable dairy fermentations. We furthermore demonstrated that Rhea and Kamadhenu do not directly hinder phage genome replication, transcription, or associated translation. Conversely, Aristaios was found to interfere with phage transcription. Two of the antiphage systems are encoded on pMRC01-like conjugative plasmids, and the Kamadhenu-encoding plasmid was successfully transferred by conjugation to three lactococcal strains, each of which acquired substantially enhanced phage resistance against Skunavirus members. Such advances in our knowledge of the lactococcal phage resistome and the possibility of mobilizing these protective functions to bolster phage protection in sensitive strains provide practical solutions to the ongoing phage problem in industrial food fermentations.IMPORTANCEIn the current study, we characterized and evaluated the mechanistic diversity of three recently described, plasmid-encoded lactococcal antiphage systems. These systems were found to confer high resistance against many members of the most prevalent and problematic lactococcal phage genus, rendering them of particular interest to the dairy industry, where persistent phage challenge requires the development of starter cultures with enhanced phage resistance characteristics. Our acquired knowledge highlights that enhanced understanding of lactococcal phage resistance systems and their encoding plasmids can provide rational and effective solutions to the enduring issue of phage infections in dairy fermentation facilities.

Specificity of Membrane-Associated J-Domain Protein, Caj1, in Amphotericin B Tolerance in Budding Yeast.

Hsp70:J-domain protein (JDP) machineries play pivotal roles in maintaining cellular proteostasis and governing various aspects of fungal physiology. While Hsp70 is known for its involvement in conferring tolerance to diverse antifungal drugs, the specific contribution of JDPs remains unclear. In this study, we examined the sensitivity of cytosolic JDP deletion strains of budding yeast to amphotericin B (AmB), a polyene antifungal agent widely utilized in fungal disease treatment due to its ability to disrupt the fungal plasma membrane (PM). Deleting Caj1, a PM-associated class II JDP, heightened susceptibility to AmB, and the protection conferred by Caj1 against AmB necessitated both its N-terminal J-domain and C-terminal lipid binding domain. Moreover, Caj1 deficiency compromised PM integrity as evidenced by increased phosphate efflux and exacerbated AmB sensitivity, particularly at elevated temperatures. Notably, phytosphingosine (PHS) addition as well as overexpression of PMP3, a positive PM integrity regulator, significantly rescued AmB sensitivity of caj1Δ cells. Our results align with the notion that Caj1 associates with the PM and cooperates with Hsp70 to regulate PM proteostasis, thereby influencing PM integrity in budding yeast. Loss of Caj1 function at the PM compromises PM protein quality control, thereby rendering yeast cells more susceptible to AmB.

PNIPAAm-based temperature responsive ionic conductive hydrogels for flexible strain and temperature sensing

Conductive hydrogels have received much attention in the field of flexible wearable sensors due to their outstanding flexibility, conductivity, sensitivity and excellent compatibility. However, most conductive hydrogels mainly focus on strain sensors to detect human motion and lack other features such as temperature response. Herein, we prepared a strain and temperature dual responsive ionic conductive hydrogel (PPPNV) with an interpenetrating network structure by introducing a covalent crosslinked network of N-isopropylacrylamide (NIPAAm) and 1-vinyl-3-butylimidazolium bromide (VBIMBr) into the skeleton of the hydrogel composed of polyvinylalcohol (PVA) and polyvinylpyrrolidone (PVP). The PPPNV hydrogel exhibited excellent anti-freezing properties (−37.34 °C) and water retention with high stretchability (∼930 %) and excellent adhesion. As a wearable strain sensor, the PPPNV hydrogel has good responsiveness and stability to a wide range of deformations and exhibits high strain sensitivity (GF=2.6) as well as fast response time. It can detect large and subtle body movements with good signal stability. As wearable temperature sensors, PPPNV hydrogels can detect human physiological signals and respond to temperature changes, and the volumetric phase transition temperature (VPTT) can be easily controlled by adjusting the molar ratio of NIPAAm to VBIMBr. In addition, a bilayer temperature-sensitive hydrogel was prepared with the temperature responsive hydrogel by two-step synthesis, which shows great promising applications in temperature actuators.

Realization of triple dispersion turning points in tapered seven-core fiber interferometer for sensitivity enhancement

Seven-core fibers have been widely applied in optical network, astronomy, and sensing applications. In this work, we report and demonstrate the existence of triple dispersion turning points of the super-mode interferences in a seven-core fiber spliced between two single-mode fibers by modifying the diameter of the multi-core fiber. The sensitivities of the interferometer on external variables, i.e., temperature, axial strain, and refractive index (RI), are measured, showing significant enhancement around the dispersion turning points. Compared to the regular multi-core fiber device without dimension modification, the sensitivities of temperature and axial strain are improved by about 60 times and 73 times around the dispersion turning points, respectively. While the regular device has no response to the external refractive index, the magnitude of RI sensitivity can reach as high as 33 459.0 nm/RIU in air, when the fiber diameter is modified to approach the dispersion turning point, enabling the discrimination of the refractive indices of N2 and CO2. The modification method of locating the modes at the dispersion turning points significantly enhances device sensitivity, providing an avenue for integrating ultra-sensitive sensors into commercial fiber networks.

IN VITRO EFFICACY OF VITEX AGNUS-CASTUS EXTRACTS AGAINST TRICHOMONAS VAGINALIS: A POTENTIAL THERAPEUTIC APPROACH

Aim and objectives: Trichomonas vaginalis is the most prevalent nonviral sexually transmitted infection globally. The current treatment, 5-nitroimidazole derivatives has raised concerns as a result of drug reliance, allergies, and drug resistance, driving efforts to identify alternative therapies. The Vitex species recognized for their pharmacological attributes including anti-inflammatory, antibacterial, antifungal, and antimicrobial properties are promising candidates for further investigation. Methods: In this study, the potential of Vitex agnus-castus extracts against T. vaginalis was explored. The water, ethanol, and 60% aqueous ethanol extracts from both leaves and fruits were examined for their effects on metronidazole (MET)-resistant (TV 50143) and sensitive strains (TV-78). Cytotoxicity was evaluated on L929 mouse fibroblast cells to determine the minimum lethal dose for each extract under aerobic and anaerobic conditions. Results: Antitrichomonial activity, cytotoxic activity and Selectivity Index (SI) values revealed distinct efficacy profiles. Leaf water extract displayed a balanced selectivity profile, while leaf 60% ethanol extract showed moderate to high selectivity. The fruit 60% ethanol extract exhibited significantly elevated selectivity with SI values of 2 and 1 under aerobic and anaerobic conditions, respectively, for the MET-sensitive reference strain, and 3 and 5, respectively, for the MET-resistant reference strain. Conclusion: These findings underscore the potential of the fruit 60% ethanol extract as a promising candidate for future drug development. Further investigations into its mechanisms and optimization are warranted to enhance its efficacy against T. vaginalis. Peer Review History: Received 13 May 2024; Reviewed 15 July 2024; Accepted 21 August; Available online 15 September 2024 Academic Editor: Dr. Amany Mohamed Alboghdadly, Ibn Sina National College for Medical Studies in Jeddah, Saudi Arabia, amanyalboghdadly@gmail.com Average Peer review marks at initial stage: 6.0/10 Average Peer review marks at publication stage: 7.5/10 Reviewers: Prof. Ali Gamal Ahmed Al-kaf, Sana'a university, Yemen, alialkaf21@gmail.com Dr. Marwa A. A. Fayed, University of Sadat City, Egypt, maafayed@gmail.com Dr. Sangeetha Arullappan, Universiti Tunku Abdul Rahman, Malaysia, sangeetha@utar.edu.my

Red-Emitting Coumarin-Derived fluorescent probe for thiol detection and indirect recognition of β-Lactamase

Biothiols, comprising cysteine (Cys), homocysteine (Hcy), and glutathione (GSH), play a pivotal role in maintaining the delicate redox balance essential for life processes, intricately intertwined with the well-being of living organisms. Deviations in their concentrations can precipitate a range of diseases. Herein, we presented a novel fluorescent probe, DIcou-DNBS, derived from coumarin, which possessed red emission and a substantial Stokes shift (122 nm), tailored for biothiol detection. DIcou-DNBS demonstrated rapid-responsiveness (6 min) towards Cys, Hcy and GSH with detection limits of 0.015 µM, 0.032 µM and 0.059 µM, respectively. Furthermore, its excellent biocompatibility enabled successful applications in biothiol fluorescence imaging of living cells and zebrafish. Beyond biothiol sensing, DIcou-DNBS leveraged its unique property to indirectly detect β-lactamases, making it a valuable tool in inhibitor screening and susceptibility testing of both sensitive (Staphylococcus aureus ATCC 29213) and resistant (Enterobacter cloacae ATCC 13047) bacterial strains. This assay system anticipates to furnish a potent instrument for visualization studies across biological and medical domains.

Multifunctional 1D/2D silver nanowires/MXene-based fabric strain sensors for emergency rescue

Abstract Monitoring the vital signs of the injured in accidents is crucial in emergency rescue process. Fabric-based sensing devices show a vast range of potential applications in wearable healthcare monitoring, human motion and thermal management due to their wearable flexibility and high sensitivity. Nevertheless, flexible electronic devices for both precise monitoring of health under low strain and motion under large strain are still a challenge in extremely harsh environment. Therefore, development of sensors with both high sensitivity and wide strain range remains a formidable challenge. Herein, a wearable flexible strain sensor with a one-dimensional/two-dimensional (1D/2D) composite conductive network was developed for healthcare and motion monitoring and thermal management by coating 1D silver nanowires (AgNWs) and 2D Ti3C2Tx MXene composite films on nylon/spandex blended knitted fabric (MANS). The MANS strain sensor can simultaneously achieve high sensitivity (gauge factor for up to 267), a wide range of detection (1–115%), excellent repeatability and cycling stability (1000 cycles). The sensor can be utilized for human health monitoring including heartbeat, pulse detection, breathing and various human motion. Moreover, the MANS sensor also has the electrical heating properties and voltage control temperature between 20-110 °C can achieved at low voltage. In addition, the MANS shows hydrophobicity with water contact angle of 137.1°. The MXene/AgNWs composite conductive layer with high sensitivity under low and large strains, electrical thermal conversion, and hydrophobicity has great potential for precisely monitoring health and motion of the injured in emergency rescue in harsh environment.

AgNPs with CNTs to construct multifunctional flexible sensor with dual conductive network structure

Flexible sensors play an important role in the field of smart devices. However, most flexible sensors suffer from poor sensing signal stability and monofunction. In this study, a multifunctional film (named PM) with dual conductive network structure was fabricated by nanocellulose crystal dispersed with silver nanoparticles and carbon nanotube. The PM film exhibited excellent conductivity (24.6 S/m) along with antimicrobial effects against Staphylococcus aureus and Escherichia coli. Furthermore, the PM sensor showed excellent electrothermal performance, reaching 133.1 °C within 50 s at 12 V, and an excellent temperature coefficient of resistance (TCR = −0.65 % °C−1) over a temperature range of 36–124 °C. More importantly, the PM sensor demonstrated a high strain sensitivity (GF = 1.66) and durability (320 cycles), capable of detecting minute human body movements at a strain as low as 1 %. Additionally, the PM sensor maintained a stable sensing performance even after 30 d of exposure to air. Therefore, the multifunctional integration of the PM sensor shows great potential for application in the field of flexible electronics.

Motion Sensing by a Highly Sensitive Nanogold Strain Sensor in a Biomimetic 3D Environment.

Recent advancements in flexible electronics have highlighted their potential in biomedical applications, primarily due to their human-friendly nature. This study introduces a new flexible electronic system designed for motion sensing in a biomimetic three-dimensional (3D) environment. The system features a self-healing gel matrix (chitosan-based hydrogel) that effectively mimics the dynamics of the extracellular matrix (ECM), and is integrated with a highly sensitive thin-film resistive strain sensor, which is fabricated by incorporating a cross-linked gold nanoparticle (GNP) thin film as the active conductive layer onto a biocompatible microphase-separated polyurethane (PU) substrate through a clean, rapid, and high-precision contact printing method. The GNP-PU strain sensor demonstrates high sensitivity (a gauge factor of ∼50), good stability, and waterproofing properties. The feasibility of detecting small motion was evaluated by sensing the beating of human induced pluripotent stem cell (hiPSC)-derived cardiomyocyte spheroids embedded in the gel matrix. The integration of these components exemplifies a proof-of-concept for using flexible electronics comprising self-healing hydrogel and thin-film nanogold in cardiac sensing and offers promising insights into the development of next-generation biomimetic flexible electronic devices.

A Breathable and Strain‐Insensitive Multi‐Layered E‐Skin Patch for Digital Healthcare Wearables

AbstractIn this study, a breathable and strain‐insensitive multi‐layered electronic skin (e‐skin) capable of real‐time detection and distinction of electrocardiogram (ECG) signals, temperature, and skin hydration is developed. Leveraging a scalable benchtop method, sensing elements are transferred onto porous and hydrophobic substrates, followed by multi‐layer stacking to enable multimodal sensing. The sensing elements, a combination of carbon nanotube and nanoporous carbon (CNT@NPC) ink, are applied using strain‐insensitive patterned masks, then spray‐coated with styrene–ethylene–butylene–styrene (SEBS) to create a hierarchical porous network through phase separation. The CNT@NPC networks exhibit an improvement in strain insensitivity with active sensing capabilities due to their adaptable molecular tuning capacity and exceptional electrical conductivity. The porous SEBS substrate offers strong bonding with CNT@NPC attributed to the π–π interactions and high kinetic energy dispersion from spray coating allowing effective transfer. This unique design facilitates breathability, and miniaturization that minimizes the interference between different sensing modalities, ensuring accurate and reliable data acquisition. The breathability (3.49 mg cm−2 h−1) and the non‐smearing nature of the multi‐layered e‐skin enables simultaneous monitoring of temperature (0.198% °C−1), skin hydration (relative humidity = 0.77% %−1), and ECG (26 ± 1 dB) with continuous data transmission to a remote smartphone interface.

Chrysalis-inspired high-toughness low-modulus conductive hydrogel sensor for intelligent sensing

Hydrogels displaying both high toughness and flexibility hold substantial practical value. However, it has been challenging to achieve these properties simultaneously. To address this challenge, we developed a special structure hydrogel named PAB-S inspired by chrysalis shell. Astragalus polysaccharide (AP) was copolymerized with polyvinyl alcohol (PVA) and betaine hydrochloride (BH) to prepare a low-modulus hydrogel, PAB. Subsequently, surface modification of the PAB hydrogel using sodium phytate (SP) resulted in the formation of the “shell” structured PAB-S hydrogel. The fracture strength of the shell-structured hydrogel increased by about 0.8 MPa. Meanwhile, PAB-S had a maximum tensile strain of 418 %, a toughness of 6.82 MJ/m3, and a modulus of elasticity of approximately 0.6 MPa. In addition, PAB-S hydrogel offers high strain sensitivity (GF up to 4.7), ultra-low response time of 20 ms. Finally, leveraging 2.4G communication technology and a deep learning (1D-CNN) algorithm, advanced functionalities such as wireless remote intelligent control, and deep learning-based finger grip disorder identification were realized using the PAB-S hydrogel sensor. The PAB-S hydrogel sensor holds promising prospects for applications in fields including deep learning, intelligent sensing, medical rehabilitation, and human–machine synchronization.

Mussel-inspired adhesion for layer-by-layer assembly towards multi-functional electrically conductive cotton fabric

Layer-by-layer (LBL) assembly has been widely utilized for constructing functional coatings to fabricate versatile materials. However, challenges arise when the assembly building blocks are electrically neutral. To address this issue, we report the use of mussel-inspired adhesion as a unique driving force for LBL assembly to fabricate electrically conductive cotton fabric (ECCF) with carbon nanotubes & graphene as conductive materials and poly(vinyl alcohol-graft-3,4-dihydroxybenzyl acetal) (PVD) as a mussel-inspired adhesive. The robust adhesion provided by PVD endowed the ECCF with excellent stability against sandpaper friction, tape peeling, and water washing. The use of the ECCF in some advanced application such as strain sensing, temperature sensing, and electric heating was studied in detail. The ECCF exhibited fast response and remarkable sensitivity in strain sensing, enabling real-time detection of various human motions such as bending, twisting, and swallowing. In temperature sensing, the ECCF exhibited a negative temperature coefficient effect and offered a linear response within the temperature range of 30–100 °C. In addition, the ECCF demonstrated exceptional electric heating performance, leading to potential use in outdoor insulation and thermal rehabilitation therapy. This innovative application of mussel-inspired adhesion in LBL assembly not only paves the way for advanced smart fabrics but also enhances functionality.

Local plastic deformation effects on the critical current of high-Jc Nb3Sn strands under uniaxial strain

Abstract In order to meet the target operating parameters of the toroidal field coils (TFC) for the next-generation Chinese compact burning plasma tokamak, high critical current density (Jc) Nb3Sn strand will be applied to the high-field winding-package (WP) of the TFC. To improve the transverse stiffness of the cable in withstanding the huge Lorentz force and avoiding conductor performance degradation, the Short-Twist-Pitch (STP) and Copper-Wound-Strand (CWS) cable patterns were taken into consideration. In the processes of cabling and compaction of the conductor, the tight cable configurations lead to severe local plastic deformation (LPD) within the strands. The strands in the conductor are subjected to strain caused by thermal contraction and Lorentz force during conductor cooling down and operation. So far it is unknown, whether the LPD could impact the critical current (Ic) versus uniaxial applied strain behaviour of high-Jc Nb3Sn strand. Aiming to investigate the effect of LPD on the Ic of strands under uniaxial strain, three types of high Jc Nb3Sn strand with different indentation depths were tested on a U-shaped bending spring. The axial strain ranges from -0.9% to +0.4% at 14 T and 4.2 K. The three types of strands showed more strain sensitivity and lower tensile irreversible strain limit with increasing LPD, while even irreversible degradation of the Ic could be observed in the compressive strain region. The sample preparation, test process, test results and analysis are reported.

Sanguisorba officinalis L. ethanolic extracts and essential oil - chemical composition, antioxidant potential, antibacterial activity, and ex vivo skin permeation study.

Sanguisorba officinalis L. is classified as a medicinal plant and used in traditional medicine. The root of this plant is mainly used as a medicinal raw material, but the above-ground parts are also a valuable source of health-promoting biologically active compounds. The study aimed to evaluate the antioxidant activity and total polyphenol content (TPC) of extracts prepared in 70% and 40% aqueous ethanol solution (dry extract content 50-500g/L) from the aerial parts of S. officinalis. The essential oil was isolated from the tested raw material, and its composition was determined using GC-MS. Ethanolic extracts and essential oil have been tested for antibacterial activity. The extract in 70% v/v ethanol (dry extract content: 500g/L) was subjected to HPLC analysis for the content of selected phenolic acids and an ex vivo skin permeation study. The ability of these metabolites to permeate and accumulate in the skin was analysed. Extracts prepared at both ethanol concentrations showed similar antioxidant activity and TPC. Depending on the method, concentration of solvent, and dry extract content (50-500g/L), the activity ranged from 1.97 to 84.54g Trolox/L. TPC range of 3.80-37.04gGA/L. Gallic acid (424mg/L) and vanillic acid (270mg/L) had the highest concentrations among the phenolic acids analysed. Vanillic acid (10μg) permeates the skin at the highest concentration. The highest accumulation in the skin was found for 2,5-dihydroxybenzoic acid (53μg/g skin), 2,3-dihydroxybenzoic acid (45μg/g skin), and gallic acid (45μg/g skin). The tested ethanolic extracts exhibited antibacterial activity. Samples with a dry extract concentration of 500g/L showed the largest growth inhibition zones. The most sensitive strains to these extracts were P. aeruginosa (24mm), S. lutea (23mm), and S. pneumoniae (22mm). The smallest inhibition zones were observed for B. subtilis (17mm). The essential oil showed weaker antimicrobial activity (growth inhibition zone 8-10mm). The GC-MS method identified 22 major components of the essential oil, including aliphatic hydrocarbons, unsaturated terpene alcohols, aliphatic aldehydes, unsaturated and saturated fatty acids, sesquiterpene, phytyl ester of linoleic acid, nitrogen compound, phytosterol, terpene ketone, phenylpropanoids, aliphatic alcohol, diterpenoid, aromatic aldehyde, and aliphatic carboxylic acid. The conducted research has shown that ethanolic extracts from Sanguisorbae herba are a valuable source of compounds with antibacterial and antioxidant potential, including phenolic acids. The fact that selected phenolic acids contained in the tested extract have the ability to permeate and accumulate in the skin provides the basis for conducting extended research on the use of extracts from this plant raw material in cosmetic and pharmaceutical preparations applied to the skin.

Recyclable and Stable Strain Sensors Based on Semi‐Wrapped Structure of Silver Nanowires in Polyvinyl Alcohol for Human Motion Monitoring

AbstractHighly sensitive strain sensors have been widely used in human motion monitoring, medical treatment, soft robots, and human–computer interaction, and the recycling of functional materials is in a huge demand for eco‐friendly and sustainable electronics. However, the manufacturing of recyclable strain sensors still remains challenging. Here, a semi‐wrapped structure based on silver nanowires and polyvinyl alcohol is proposed to realize a recyclable and stable strain sensor. It has shown excellent sensitivity, fast response, high stretchability and good environmental stability, and is successfully applied for human motion monitoring. In addition, a simple strategy is developed to effectively recycle silver nanowires in an eco‐friendly manner. The recyclable and stable strain sensor demonstrates potential applications in wearable and stretchable electronics, and the recycling strategy can be extended to other noble metal nanomaterials.

Selecting the Most Relevant Mouse Strains for Evaluating Radiation-Induced Multiple Tissue Injury after Leg-Shielded Partial-Body Gamma Irradiation.

Animal studies are needed that best simulate a large-scale, inhomogeneous body exposure after a radiological or nuclear incident and that provides a platform for future development of medical countermeasures. A partial-body irradiation (PBI) model using 137Cs gamma rays with hind limb (tibia) shielding was developed and assessed for the sequalae of radiation injuries to gastrointestinal tract, bone marrow (BM) and lung and among different genetic mouse strains (C57BL/6J, C57L/J, CBA/J and FVB/NJ). In this case, a marginal level of BM shielding (∼2%) provided adequate protection against lethality from infection and hemorrhage and enabled escalation of radiation doses with evaluation of both acute and delayed radiation syndromes. A steep radiation dose-dependent body weight loss was observed over the first 5 days attributed to enteritis with C57BL/6J mice appearing to be the most sensitive strain. Peripheral blood cell analysis revealed significant depression and recovery of leukocytes and platelets over the first month after PBI and were comparable among the four different mouse strains. Latent pulmonary injury was observed on micro-CT imaging at 4 months in C57L/J mice and confirmed histologically as severe pneumonitis that was lethal at 12 Gy. The lethality and radiological densitometry (HUs) dose responses were comparable to previous studies on C57L/J mice after total-body irradiation (TBI) and BM transplant rescue as well as after localized whole-thorax irradiation (WTI). Indeed, the lethal radiation doses and latency appeared similar for pneumonitis appearing in rhesus macaques after WTI or PBI as well as predicted for patients given systemic radiotherapy. In contrast, PBI treatment of C57BL/6 mice at a higher dose of 14 Gy had far longer survival times and developed extreme and debilitating pIeural effusions; an anomaly as similarly reported in previous thorax irradiation studies on this mouse strain. In summary, a radiation exposure model that delivers PBI to unanesthetized mice in a device that provides consistent shielding of the hind limb BM was developed for 137Cs gamma rays with physical characteristics and relevance to relatively high photon energies expected from the detonation of a nuclear device or accidental release of ionizing radiation. Standard strains such as C57BL/6J mice may be used reliably for early GI or hematological radiation syndromes while the C57L/J mouse strain stands out as the most appropriate for evaluating the delayed pulmonary effects of acute radiation exposure and recapitulating this disease in humans.

Phytochemical Constituents, Antimicrobial Activity of Daniellia oliveri, and X-ray Crystal Structure of Polyalthic Acid

Objectives: Daniellia oliveri Rolfe is a well-known plant of Fabaceae family whose previous phytochemical and pharmacological studies led to the identification of triterpenoid, phenol, anthraquinone oxalate with antioxidant, antibacterial and antifungal activities. This study aimed to investigate chemical constituents and evaluate the antimicrobial potency of the root of D. oliveri. Methods: The methanol extract of the root barks of D. oliveri was subjected to silica gel chromatographic separation. The structures of the isolated compounds (1-9) were determined by analyzing their spectrometric and spectroscopic spectra. Single-crystal-Xray analysis was used to establish the absolute skeletal structure of compound 1. Crude extract, fractions and compounds were investigated against four bacteria vis Pseudomonas aeruginosa 27853, Escherichia coli 5, Staphylococcus aureus 25923 and Streptococcus sp . 9619 and, two yeast vis Candida albicans14053 and Candida tropicalis 018 using broth microdilution method. Results: The phytochemical prospection of the methanol extract of D. oliveri allowed the isolation of a naturally crystallized diterpenoid type furolabdane: polyalthic acid 1, as well as eight amorphous compounds (2-9). Among the tested samples, the crude extract, fractions and compounds selectively showed inhibitory effects against the tested microorganisms with MIC values ranging from 4 to 1024 μg/mL. Fraction D1 and compounds 1, 4, 7, 8 and 9 exhibited the broadest antimicrobial effects among fractions and compounds while D5 and compound 1 showed the best activity with MIC values of 16 and 4 μg/mL respectively against E. coli which appeared to be the most sensitive strain . Conclusion: Polyaltic acid (1) showed the best activity with significant MIC value of 4 μg/mL identical to that of ceftazidine against E. coli. The MIC values of the active compounds 1, 4 and 7 are comparable to those of ceftazidime. Then, these compounds from natural origin, could serve as markers in the standardization of Daniellia plant as phytomedicine.

A tough, stretchable, adhesive and electroconductive polyacrylamide hydrogel sensor incorporated with sulfonated nanocellulose and carbon nanotubes

Recently, hydrogel sensors have been widely applied in wearable and portable electronics, but the low mechanical property, intolerance of fatigue, and low sensitivity and adhesion limit their further applications. In this study, sulfonated nanocellulose (SCNF) with dual functionality was blended into polyacrylamide (PAM) hydrogel matrix to reinforce the mechanical strength and facilitate the homogeneous dispersion of carbon nanotubes (CNTs). The SCNF-CNT/PAM hydrogel was designed through free radical polymerization to achieve commendable mechanical, electrical, and multifunctional properties. The environmental-friendly SCNF serves as bio-templates to facilitate the assembling of CNT into integrated SCNF-CNT structures with good dispersity, thus enabling the establishment of an integrated conducting and reinforcing network. The fabricated SCNF-CNT/PAM hydrogel exhibited outstanding compressive strength (∼0.45 MPa at 50 % strain), tensile strength (∼169.12 kPa), and antifatigue capacity under cyclic stretching and pressing. Furthermore, the multifunctional sensors assembled using this hydrogel demonstrated high strain sensitivity (gauge factor ~ 3.7 at 100–400 % strain) and effectively detected human motions. This design principle provides promising prospects for constructing next-generation multifunctional flexible sensors, and the integration of these distinctive properties enables the prepared composite hydrogels to find potential applications in various areas, such as implantable soft electronic devices, electronic skin, and human movement monitoring.

A temperature-insensitivity multi-channel strain sensor based on chirped fiber grating loop ring-down structure

This study proposes a novel multi-channel strain sensor, which combines the chirped fiber grating loop ring-down (CFGLRD) structure and time division multiplexing (TDM) technology. Each channel contains a CFGLRD cavity based on overlapping spectrum demodulation, which can convert measurements into ring-down spectra. All cavities are connected in series by delay fiber. The advantages of the sensor include simple structure, high light utilization, and temperature insensitive. A two-channel strain experimental setup is used in performance testing of the sensor. The strain measurement ranges of both channels extend from 0 to 3000 με. The resolutions of two channels are 18.3 με and 27.9 με, the linear correlation coefficients R2 are 0.997 and 0.996, the strain sensitivities are about 112.97 μs/ε and 280.03 μs/ε, and the temperature sensitivities are 0.37 ns/°C and 0.72 ns/°C. The experimental results show the structure has good performances on linearity of curve, measurement range, and temperature robustness.