Semiconductor Nanoparticles Research Articles

(Invited) Charge Separation and Stabilisation in Photocatalyst Materials for Solar Driven Water Splitting

In photocatalytic systems for solar energy conversion, a key challenge for efficient operation is the efficient separation and stabilisation of photogenerated charges, and thereby the minimisation of undesired recombination losses. This challenge is particularly great for photocatalytic systems because of the long charge lifetimes required to drive catalysis A further consideration is to minimise the energy losses required to drive this charge separation. My talk will cover examples of recent work from my group addressing aspects of this challenge. I will start by considering the role of polaron localisation / relaxation in driving charge separation in metal oxides, and quantification of the energetic loss associated with this polaron formation. Kinetic competion between polaron formation and ligand field state mediated charge recombination will be highlighted as the key challenge limiting the performance of many visible light absorbing metal oxides. The roles of metal oxide dielectric constant, surface facet energies, traps, ‘photocharging’ and heterojunctions in aiding charge separation in metal oxides will be discussed, drawing on examples from BiVO4 and SrTiO3. I will then go on to discuss charge separation and stabilisation in alternative photocatalyst materials, including organic semiconductor nanoparticles and metal-organic frameworks, highlighting the observation of remarkably long lived charge photogeneration in both systems and their relevance to the efficiency photocatalytic performance.

(Invited) Assembly of Carbon Nanotubes Heterostructures Down to Single-Particle Control

We will present different chemical strategies for the in-solution assembly of single walled carbon nanotube (SWCNT)-based heterostructures, down to single-particle control and resolution. In particular, we interfaced SWCNTs to inorganic semiconducting nanoparticles and nanocrystals, perovskites, as well as metal nanoparticles and nanowires. We developed various approaches towards this end, from the selective and differential functionalisation of CNTs terminal ends with distinct individual nanomoieties , to the use of nanotubes as templates for the growth of nanomaterials on their sidewall or in their cavity. Solution-processed optoelectronic devices were fabricated employing the aforementioned nanohybrids, displaying various sensitivity to a broad range of illumination wavelengths.

Photocatalytic properties of ZnO semiconductor nanoparticles green synthesized employing Ipomoea stans leave extracts

One of the biggest problems in the ecosystem is wastewater contaminated with industrial dyes. These pollutants have a very stable chemical structure, which causes complicated removal. However, a possible alternative for wastewater treatment is zinc oxide semiconductor nanoparticles (ZnO NPs). The approach of this study was the implementation of a green synthesis methodology for the obtention of ZnO nanoparticles employing Ipomoea stans (TV) leaves as extracts. The properties of the ZnO nanoparticles synthesized at 1 %, 2 %, and 4 % w/v (weight/volume) concentration of the extract were obtained from the characterization using different techniques. The FTIR analysis determined the presence of the active functional groups attached to the surface, which capped and stabilized the ZnO NPs; a band located in the range of 500-390 cm−1 confirms the presence of the Zn–O bond. The UV absorption spectra of all ZnO NPs samples were determined by executing the ultraviolet–visible spectroscopy technique, with a characteristic signal located at ∼370 nm and energy gap values between 3.036 eV and 3.101 eV. In addition, XRD patterns determined the average crystallite sizes to be 30.78 nm for ZnO-TV 1 %, 18.68 nm ZnO-TV 2 %, and 11.96 nm ZnO-TV 4 %, respectively. Furthermore, the results from transmission electron microscopy (TEM) displayed the following values of mean particle size of 21 nm, 24.4 nm, and 10.16 nm for ZnO-TV 1 %, ZnO-TV 2 % and ZnO-TV 4 % with S.D. 9.10, 12.5 and 3.6. Finally, the photocatalytic activity was evaluated utilizing the industrial dyes Methyl Orange, Methylene Blue, Rhodamine B, Malachite Green, and Congo Red. Obtaining outstanding results in the degradation of all industrial dyes. All syntheses achieved degradation greater than 91 % for methyl orange, methylene blue, and rhodamine B.

Transparent self-cleaning coating prepared from SiO2/B4C and SiO2/B4C/TiO2 for the solar cell

Transparent self-cleaning coatings based on photocatalytic activity have attracted great attention in recent years owing to their promising applications in many fields, such as solar cell cover glass. This study reports a simple method to prepare transparent self-cleaning silicon dioxide (SiO2) coatings filled by boron carbide (B4C) and titanium dioxide (TiO2) nanoparticles. A sol-gel technique was used to synthesize a SiO2 solution containing B4C and TiO2 nanoparticles, and a dip-coating technique was followed to coat the composite solution on glass slides. The SiO2 coating was successfully obtained in the presence of both semiconductor nanoparticles as confirmed by FTIR and XRD measurements. Both the photocatalytic activity and self-cleaning property of the composite coatings were evaluated by photocatalytic degradation of a model dye, methylene blue, under visible light irradiation. The SiO2 coating containing both B4C and TiO2 nanoparticles exhibited an improved photocatalytic activity compared to the SiO2 coating including only B4C. In particular, a 46% degradation rate of the model dye methylene blue was achieved for the SiO2 coating containing 15 wt% B4C and 5 wt% TiO2 nanoparticles. Highly transparent composite coatings on glass slides were prepared. The SiO2 coating containing both B4C and TiO2 nanoparticles was found to exhibit ~8% reduction in the optical transmission of the glass slide and ~1% reduction in the efficiency of a solar cell containing the coated glass slide. These findings demonstrated that the SiO2 composite coatings have potential for self-cleaning applications in removing contaminants from the glass cover of the solar cell under visible light irradiation.Graphical

Influence of Surface Chemistry on Metal Deposition Outcomes in Copper Selenide-Based Nanoheterostructure Synthesis.

The use of nanoparticle surface chemistry to direct metal deposition has been well-studied in the modification of metal nanoparticle substrates but is not yet well-established for metal chalcogenide particle substrates, although integration of these particles into nanoheterostructures is of high interest. In this report, we investigate the effect of Cu2-xSe surface chemistry on the morphology of metal deposition on these plasmonic semiconductor nanoparticles. Specifically, we functionalize Cu2-xSe nanoparticles with a suite of 12 different ligands and investigate how different aspects of the ligand structure do or do not impact the morphology and extent of subsequent metal deposition on the Cu2-xSe surface. Surprisingly, our results indicate that the morphology of the resulting metal deposits and the extent of metal deposition onto the existing Cu2-xSe particle substrate are indistinguishable for the majority of ligands tested. An exception to these findings is observed for particles functionalized by quaternary alkylammonium bromides, which exhibit statistically distinct metal deposition patterns compared to all other ligands tested. We hypothesize that this unique behavior is due to a cooperative binding mechanism of the quaternary alkylammonium bromides to the surface of copper selenide. Taken together, these results yield both new strategies for controlling postsynthetic modification of copper selenide nanoparticles and also reveal limitations of surface chemistry-based approaches for this system.

Water-Soluble Lead Sulfide Nanoparticles: Direct Synthesis and Ligand Exchange Routes.

Colloidal semiconductor nanoparticles (NPs) represent an emergent state of matter with unique properties, bridging bulk materials and molecular structures. Their distinct physical attributes, such as bandgap and photoluminescence, are intricately tied to their size and morphology. Ligand passivation plays a crucial role in shaping NPs and determining their physical properties. Ligand exchange (LE) offers a versatile approach to tailoring NP properties, often guided by Pearson's Hard-Soft Acid-Base theory. Lead sulfide (PbS), a semiconductor of considerable interest, exhibits size-dependent tunable bandgaps from the infrared to the visible range. Here, we present two methods for synthesizing water-soluble, polyvinylpyrrolidone (PVP)-coated PbS NPs. The first involves direct synthesis in an aqueous solution while utilizing PVP as the surfactant for the formation of nano-cubes with a crystal coherence length of ~30 nm, while the second involves LE from octadecylamine-coated PbS truncated nano-cubes to PVP-coated PbS NPs with a crystal coherence length of ~15 nm. Multiple characterization techniques, including X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy, and thermal gravimetric analysis, confirmed the results of the synthesis and allowed us to monitor the ligand exchange process. Our findings demonstrate efficient and environmentally friendly approaches for synthesizing PVP-coated PbS NPs.

Characterization of Individual Widegap Semiconductor Nanoparticles by Ultraviolet Photoluminescence Microscopy

Characterization of Individual Widegap Semiconductor Nanoparticles by Ultraviolet Photoluminescence Microscopy

Optical Characteristics of a New Molecular Complex: "Nafion-Colloidal CdSe/CdS/ZnS Nanocrystals".

Here, the optical properties of the Nafion polymer membrane containing colloidal CdSe/CdS/ZnS nanocrystals embedded by diffusion have been studied. The CdSe/CdS/ZnS nanocrystals have a core/shell/shell appearance. All experiments were carried out at room temperature (22 ± 2) °C. A toluene solution was used to provide mobility to the active sulfone groups of the Nafion membrane and to embed the nanocrystals inside the membrane. The diffusion process of colloidal CdSe/CdS/ZnS nanocrystals into Nafion proton exchange membrane has resulted in a new molecular complex "Nafion-colloidal CdSe/CdS/ZnS nanocrystals". The kinetics of the nanocrystals embedding into the membrane matrix was investigated using luminescence analysis and absorption spectroscopy techniques. The embedding rate of CdSe/CdS/ZnS nanocrystals into the Nafion polymer membrane was approximately 4·10-3 min-1. The presence of new luminescence centers in the membrane was proved independently by laser emission spectroscopy. The luminescence spectrum of the resulting molecular complex contains intensity maxima at wavelengths of 538, 588, 643 and 700 nm. The additional luminescence maximum observed at the 643 nm wavelength was not recorded in the original membrane, solvent or in the spectrum of the semiconductor nanoparticles. The luminescence maximum of the colloidal CdSe/CdS/ZnS nanocrystals was registered at a wavelength of 634 nm. The intensity of the luminescence spectrum of the membrane with embedded nanocrystals was found to be higher than the intensity of the secondary emission peak of the initial nanocrystals, which is important for the practical use of the "Nafion-colloidal nanocrystals" complex in optical systems. The lines contained in the luminescence spectrum of the membrane, which has been in solution with colloidal nanocrystals for a long time, registered upon its drying, show the kinetics of the formation of the molecular complex "Nafion membrane-nanocrystals". Colloidal nanocrystals located in the Nafion matrix represent an analog of a luminescent transducer.

The photothermal properties of hydrogel nanocomposite embedded with ZnO/CuO based on PVA/GA/activated carbon for solar-driven interfacial evaporation

Using the renewable energy, especially solar energy, is an environmental-friendly approach for seawater desalination. Solar evaporation is a promising freshwater harvesting strategy rich in energy, including solar and water energy. Herein, we propose a solar evaporation hybrid hydrogel including polyvinyl alcohol (PVA) and glutaraldehyde (GA) as a polymer network, semiconductor oxide nanoparticles (ZnO, CuO) and activated carbon as a photothermal material. Structural properties of hybrid hydrogel were characterized by X-ray diffraction (XRD) analysis, surface morphology by field emission scanning electron microscope (FE-SEM), chemical bonding by Fourier transform infrared spectroscopy (FTIR) and optical absorption and absorption coefficient (α) of components by UV–Vis spectroscopy. The result showed in visible region, PVA:ZnO:AC hydrogel nanocomposite has a strong absorption (55%) compare of the PVA:CuO:AC hydrogel nanocomposite (35%). In addition, by distillation measurements, the evaporator system demonstrated for PVA:CuO:AC and PVA:ZnO:AC Hydrogel an evaporation rate of 2.29 kg m−2 h−1 and 5.19 kg m−2 h−1 with the evaporation efficiency of 30.66% and 70.80%, respectively, under 0.1 sun irradiation. For PVA:CuO:AC hydrogel, the hardness of Caspian seawater decreased from 6648 to 115 ppm and ion conductance from 8641 (μS) to 244 (μS) and for the PVA:ZnO:AC Hydrogel decreased to 97 ppm and ion conductance to 206 (μS). Experiments showed that with changing type of the ZnO or CuO semiconductor oxide nanoparticles can effectively on regulate the optical properties of the evaporator. Eventually, this work begins a new point of synthesizing cost-effective photothermal absorbers based on metal oxides material and activated carbon nanocomposite.

Surface structure-based model to calculate thermal and optical properties in nanoscale and quantum dot semiconductors

Surface combination structure was used to design the construction of nano and quantum films, particles, and dots. The created model was applied to tetrahedral semiconductor nanoparticles and quantum dots with a successful performance. It works better than reported experimental data across the whole size range, from the bulk state to the critical size of quantum dots. The model helps to figure out the melting point that changes with the nanosize scale as applied on Si and Sn, which are simple tetrahedral semiconductors, and for CdS and CdSe, which are among II-VI group compounds. It was also used to calculate melting-related parameters such as cohesive energy, Debye temperature, vibrational entropy, and melting enthalpy. The nanosize dependence of the lattice volume and the atom's ionization energy describes the solid surface structure. From the model, an equation was obtained to calculate the energy gaps in Si, CdS, and CdSe particles that are nano- and quantum-dot-sized, and the results are compared to the experimental data that goes with these particles.

Induced-aggregates in photocatalysis: An unexplored approach to reduce the noble metal co-catalyst content

Photocatalysis has emerged as a promising and environmentally sustainable solution to produce high-purity hydrogen through ethanol photoreforming. It is commonly accepted that adding co-catalysts, especially noble metals, significantly enhances the catalytic activity of semiconductors. However, the high cost of noble metals such as Pt may limit the real application of this emerging technology. Here we evaluate the possibility of reducing the noble metal loading by creating the appropriate interface between pre-formed semiconductor nanoparticles. Commercial titania (P25) was selected as the semiconductor due to its commercial availability, facilitating the straightforward validation and corroboration of our results. Pt was selected as co-catalyst because one of the most efficient photocatalysts for the ethanol photo-reforming is still based on the use of P25 in combination with Pt. We report that the creation of induced aggregates dramatically improves the total hydrogen produced when very low loadings (≤0.05 wt%) of Pt are used. We have developed a pioneering reactor designed for conducting photoluminescence studies under authentic operational conditions of nanoparticle suspensions in the liquid phase. This approach allows us to obtain the average photoluminescence emission from the P25 agglomerates what it would be impossible to obtain by using standard solid samples holders. Thanks to this equipment, we can conclude that this remarkable improvement of the activity is mainly due to creation of an interface that favors the charge transfer between the particles of the aggregates. According to this, the titania nanoparticles of the agglomerates act as an antenna to collect the photons of the sun-light and produce the photo-excited electrons that will be transferred to the platinum nanoparticles located in the same agglomeration. In contrast, raw P25 with low loadings of Pt would have a high number of titania nanoparticles without platinum, and therefore, inactive. This result would be especially relevant in the case of immobilized photocatalytic systems for real future photocatalytic reactors because the immobilization of the semiconductors would generate similar interactions to the one created by our method. Consequently, the initial semiconductor immobilization followed by the subsequent photo-deposition of the co-catalyst emerges as a promising approach for a substantial reduction of the co-catalyst content.

Dual-spectral narrow bandwidth surface lattice resonance sensors

Dual-spectral narrow bandwidth surface lattice resonance (SLR) sensors consisting of semiconductor/SiO2 nanoparticle dimer arrays are proposed to achieve two high figures of merit (FOM). We demonstrate that FOM can be optimized by the change of semiconductor nanoparticles’ shape. The best shape of Si nanoparticles with high FOM is pillar because of the narrowest FWHM of SLR. The FOM of Si/SiO2 nanopillar dimer array can reach a value of 180 due to the high sensitivity and narrow bandwidth. Besides, the influences of different structural parameters (such as the gap of the Si nanopillars in each dimer, Si nanopillars’ diameter and height) on FOM of Si/SiO2 nanopillar dimer arrays are investigated. In the trade-off between the strong SLR and the high FOM, the gap of 50[Formula: see text]nm, the Si nanopillars’ diameter of 80[Formula: see text]nm, and the Si nanopillars’ height of 100[Formula: see text]nm, are chosen as suitable values. Furthermore, a comparison of FOM between Si, Ge, GaAs nanopillars with fixed sizes is implemented to select the appropriate materials. The best semiconductor material to obtain a high FOM is Si because of a narrower FWHM and higher sensitivity. This work is of great significance for the design of multi-spectral SLR sensors.

Enhanced photocatalytic removal of Cr(VI) and Rhodamine B from water using plant-mediated CdS nanoparticles: Mechanistic insights and environmental applications

Photocatalytic remediation using semiconductor nanoparticles presents a promising approach for water purification. In this study, cadmium sulfide (CdS) nanoparticles were synthesized via a plant-mediated approach and evaluated for their efficacy in removing Cr(VI) and Rhodamine B contaminants from aqueous solutions under visible light irradiation. The CdS nanoparticles were characterized by X-ray diffraction (XRD), which confirmed the presence of the cubic phase with a crystallite size of 10 nm. UV–visible diffuse reflectance spectroscopy (DRS) indicated bandgap energy of 2.4 eV, facilitating visible light absorption. Photoluminescence (PL) spectroscopy revealed reduced recombination rates of photogenerated charge carriers, enhancing photocatalytic efficiency. The synthesized CdS nanoparticles demonstrated efficient removal of both Cr(VI) and Rhodamine B, achieving degradation efficiencies of 92 % and 95 %, respectively, within 120 min under optimized conditions. Mechanistic insights suggest the generation of reactive oxygen species (ROS) and electron-hole pairs (e-/h+) contributing to pollutant degradation. This study underscores the potential of plant-mediated CdS nanoparticles as effective photocatalysts for environmental remediation applications.

Effect of Operating Parameters on Photocatalytic Treatment of Synthetic Wastewater Using CaTiO3

Photocatalysis is thought to be a long-term, environmentally friendly, economically feasible, and promising technique for treating wastewater. The development of semiconductor nanoparticles has generated a great deal of interest in the treatment of wastewater. To break down complex contaminants found in wastewater into simpler compounds, including H2O and CO2, several UV/visible light excitable nanomaterials have been explored as photocatalysts. Their effectiveness can be managed by adjusting several reaction-related parameters like the intensity of light, irradiance time, pH, catalyst dose, temperature, doping, etc. The performance of the photocatalyst in the photodegradation of contaminants is greatly affected by these parameters. The main goal of this study is to find the best operational parameters and their impact on the photocatalytic treatment of synthetic waste-water using calcium titanate (CaTiO3) nanoparticles. For this purpose, sol-gel synthesized CaTiO3 with a band gap of 3.57 eV was used. The size of the synthesized nanoparticles is smaller than 47.62 nm. The results of photocatalytic treatment of synthetic wastewater demonstrate that CaTiO3 exhibits its best photocatalytic performance at 33 W UV light, pH 6.0, and 3.33 g L-1 CaTiO3 dose with 8 hours of irradiation time. With chemical oxygen demand (COD) concentrations varying from 700 to 40000 mg L-1 at the initial stages, the percentage of COD removal under these conditions was 100% to 77%.

Air-Processed Perovskite Solar Cells with >25% Efficiency and High Stability Enabled by Crystallization Modulation and Holistic Passivation.

Organic semiconductors (e.g., PCBM and IDIC) frequently serve as interface passivants for perovskite solar cells (PSCs) due to their beneficial passivation effects on perovskite interfaces. However, their passivation to the interiors of perovskite films is greatly limited by their poor solubility in polar solvents and compatibility issues. Here the facile synthesis of organic semiconductor nanoparticle (NP) passivants that readily disperse in perovskite inks is reported. Adding these NPs into perovskite inks not only modulates perovskite crystallization, improves film quality and conductivity, but also achieves holistic bulk film passivation. Consequently, blade-coated p-i-n PSCs with ICBA NPs achieve an impressive efficiency of 25.1% (independently certified as 25.0%), the highest reported value for air-processed PSCs irrespective of fabrication methods or device structures. This work develops a novel approach for effective and holistic perovskite passivation by converting conventional passivants to perovskite-compatible NPs, paving the way for more efficient and stable perovskite solar devices.

Liquid Metal‐Printed Semiconductors

Liquid metal (LM) electronic ink (e‐ink) is a promising new‐generation material for printed electronics. Extended from this ideal platform, such ink can be post‐processed or loaded with semiconductor nanoparticles to further make semiconductors in the forms of dots, wires, and films on its surface. In this way, targeted semiconductors can be quickly fabricated and patterned as desired with low cost at around room temperature. This leads to the unconventional bottom‐up strategy for direct manufacture of functional devices. Along this direction, a series of p–n junction diodes, field‐effect transistors, and light‐emitting devices have been developed. LM‐printed semiconductor would significantly innovate the classical processes of preparing integrated circuits and electronic devices. To push forward further progress of this cutting‐edge frontier, this article is dedicated to present an overview of LM‐printed semiconductor. The material category of LM semiconductor e‐inks and their synthesis approaches is introduced. Then the core strategies toward printing semiconductors are systematically outlined. Following that, the typical printed semiconductor materials and electronic devices thus constructed as well as their potential applications are summarized. Finally, scientific and technical challenges thus raised are interpreted. Perspective in the area is given.

Correlating semiconductor nanoparticle architecture and applicability for the controlled encoding of luminescent polymer microparticles

Luminophore stained micro- and nanobeads made from organic polymers like polystyrene (PS) are broadly used in the life and material sciences as luminescent reporters, for bead-based assays, sensor arrays, printable barcodes, security inks, and the calibration of fluorescence microscopes and flow cytometers. Initially mostly prepared with organic dyes, meanwhile luminescent core/shell nanoparticles (NPs) like spherical semiconductor quantum dots (QDs) are increasingly employed for bead encoding. This is related to their narrower emission spectra, tuneability of emission color, broad wavelength excitability, and better photostability. However, correlations between particle architecture, morphology, and photoluminescence (PL) of the luminescent nanocrystals used for encoding and the optical properties of the NP-stained beads have been rarely explored. This encouraged us to perform a screening study on the incorporation of different types of luminescent core/shell semiconductor nanocrystals into polymer microparticles (PMPs) by a radical-induced polymerization reaction. Nanocrystals explored include CdSe/CdS QDs of varying CdS shell thickness, a CdSe/ZnS core/shell QD, CdSe/CdS quantum rods (QRs), and CdSe/CdS nanoplatelets (NPLs). Thereby, we focused on the applicability of these NPs for the polymerization synthesis approach used and quantified the preservation of the initial NP luminescence. The spectroscopic characterization of the resulting PMPs revealed the successful staining of the PMPs with luminescent CdSe/CdS QDs and CdSe/CdS NPLs. In contrast, usage of CdSe/CdS QRs and CdSe QDs with a ZnS shell did not yield luminescent PMPs. The results of this study provide new insights into structure–property relationships between NP stained PMPs and the initial luminescent NPs applied for staining and underline the importance of such studies for the performance optimization of NP-stained beads.

Modeling rough surfaces as a strategy to control the crystal quality, spatial and size distribution in semiconductor nanoparticles growth: A theoretical-experimental approach

Modeling rough surfaces as a strategy to control the crystal quality, spatial and size distribution in semiconductor nanoparticles growth: A theoretical-experimental approach

Optical properties of nanocomposites based on polypropylene modified by nanoparticles of oxide compounds

The optical properties in UV, visible and near IR spectral regions for nanocomposites based on polypropylene modified by nanoparticles of oxide compounds ZrO2, Al2O3, SiO2, MgO, TiO2, ZnO were studied. A shift of the main optical absorption edge to the short-wave region upon modification by dielectric nanoparticles (MgO, ZrO2, and Al2O3) was established. The absorption edge shifts to the long-wave region upon the introduction of semiconductor nanoparticles (ZnO, TiO2) and amorphous SiO2 particles. In all spectra, the absorption bands at 1200, 1400, and 1720 nm characterized by overtone vibrations of CH, CH2, and CH3 molecular groups were recorded. OH groups make a certain contribution to the bands at 1400 and 1720 nm. The dependence of the intensity of these absorption bands on the type and concentration of nanoparticles used in the modification of polypropylene was analyzed. X-ray diffraction analysis of the studied nanocomposites was carried out, the formation of β-PP was registered upon modification by Al2O3 nanoparticles. Photoluminescence spectra of nanocomposites were studied. It was found that the introduction of nanoparticles (except SiO2) does not lead to the formation of new luminescence bands in PP.

Semiconductor Nanoparticle Anchored Single-Walled Carbon Nanotubes for a Bolometer.

The bolometer is developed using single-walled carbon nanotubes (SWCNT) anchored with semiconductor nanoparticles of cadmium sulfide, stannous disulfide, and zinc oxide (ZnO). The bolometric responses were recorded at varying temperatures from 10 K to room temperature. The anchored SWCNTs provided a higher temperature coefficient of resistance (TCR) than pristine SWCNTs. The largest TCR is recorded from SWCNTs/ZnO (-0.11%/K) at room temperature, which is 200% higher than pristine SWCNTs. The largest photoresponsivities of SWCNTs/ZnO under near-infrared (NIR) and wide wavelength source (200-1200 nm) illuminations are 5.06 and 37.51 mV/W, respectively. The extraordinary performance of SWCNTs/ZnO stands out at ∼17 × 104% under IR illumination. The study presents a significant advancement in the development of high-performance SWCNT bolometric materials by anchoring with semiconductor nanoparticles.