SeMet Derivative Research Articles

Cloning, expression, purification, crystallization and X-ray crystallographic analysis of CofB, the minor pilin subunit of CFA/III from human enterotoxigenic Escherichia coli.

Colonization factor antigen III (CFA/III) is one of the virulence factors of human enterotoxigenic Escherichia coli (ETEC) that forms the long, thin, proteinaceous fibres of type IV pili through assembly of its major and minor subunits CofA and CofB, respectively. The crystal structure of CofA has recently been reported; however, the lack of structural information for CofB, the largest among the known type IV pilin subunits, hampers a comprehensive understanding of CFA/III pili. In this study, constructs of wild-type CofB with an N-terminal truncation and the corresponding SeMet derivative were cloned, expressed, purified and crystallized. The crystals belonged to the rhombohedral space group R32, with unit-cell parameters a = b = 103.97, c = 364.57 Å for the wild-type construct and a = b = 103.47, c = 362.08 Å for the SeMet-derivatized form. Although the diffraction quality of these crystals was initially very poor, dehydration of the crystals substantially improved the resolution limit from ∼ 4.0 to ∼ 2.0 Å. The initial phase was solved by the single-wavelength anomalous dispersion (SAD) method using a dehydrated SeMet CofB crystal, which resulted in an interpretable electron-density map.

Characterization of Staphylococcus aureus EssB, an integral membrane component of the Type VII secretion system: atomic resolution crystal structure of the cytoplasmic segment

The Type VII protein translocation/secretion system, unique to Gram-positive bacteria, is a key virulence determinant in Staphylococcus aureus. We aim to characterize the architecture of this secretion machinery and now describe the present study of S. aureus EssB, a 52 kDa bitopic membrane protein essential for secretion of the ESAT-6 (early secretory antigenic target of 6 kDa) family of proteins, the prototypic substrate of Type VII secretion. Full-length EssB was heterologously expressed in Escherichia coli, solubilized from the bacterial membrane, purified to homogeneity and shown to be dimeric. A C-terminal truncation, EssB∆C, and two soluble fragments termed EssB-N and EssB-C, predicted to occur on either side of the cytoplasmic membrane, have been successfully purified in a recombinant form, characterized and, together with the full-length protein, used in crystallization trials. EssB-N, the 25 kDa N-terminal cytoplasmic fragment, gave well-ordered crystals and we report the structure, determined by SAD (single-wavelength anomalous diffraction) targeting an SeMet (selenomethionine) derivative, refined to atomic (1.05 Å; 1 Å=0.1 nm) resolution. EssB-N is dimeric in solution, but crystallizes as a monomer and displays a fold comprised of two globular domains separated by a cleft. The structure is related to that of serine/threonine protein kinases and the present study identifies that the Type VII secretion system exploits and re-uses a stable modular entity and fold that has evolved to participate in protein–protein interactions in a similar fashion to the catalytically inert pseudokinases.

Crystal Structure of Elongator Subcomplex Elp4–6

Elongator is a multiprotein complex composed of two subcomplexes, Elp1-3 and Elp4-6. Elongator is highly conserved between yeast and humans and plays an important role in RNA polymerase II-mediated transcriptional elongation and many other processes, including cytoskeleton organization, exocytosis, and tRNA modification. Here, we determined the crystal structure of the Elp4-6 subcomplex of yeast. The overall structure of Elp4-6 revealed that Elp6 acts as a bridge to assemble Elp4 and Elp5. Detailed structural and sequence analyses revealed that each subunit in the Elp4-6 subcomplex forms a RecA-ATPase-like fold, although it lacks the key sequence signature of ATPases. Site-directed mutagenesis and biochemical analyses indicated that the Elp4-6 subcomplex can assemble into a hexameric ring-shaped structure in vitro and in vivo. Furthermore, GST pulldown assays showed that the ring-shaped assembly of the Elp4-6 subcomplex is important for its specific histone H3 binding. Our results may shed light on the substrate recognition and assembly of the holo-Elongator complex.

Expression, purification and preliminary crystallographic analysis of human thyroid hormone responsive protein

Thyroid hormone responsive protein (Thrsp, also known as Spot 14 and S14) is a carbohydrate-inducible and thyroid-hormone-inducible nuclear protein specific to liver, adipose and lactating mammary tissues. Thrsp functions to activate genes encoding fatty-acid synthesis enzymes. Recent studies have shown that in some cancers human Thrsp (hS14) localizes to the nucleus and is amplified, suggesting that it plays a role in the regulation of lipogenic enzymes during tumourigenesis. Thrsp, a member of the Spot 14 superfamily, is an acidic homodimeric protein with no sequence similarity to other mammalian gene products and its biochemical function is elusive. To shed light on the structure-function relationship of this protein, human Thrsp was crystallized. Recombinant human Thrsp (hThrsp), the N-terminally truncated human Thrsp(10-146) (hThrsp9) and their selenomethionyl (SeMet) derivatives were expressed in Escherichia coli, purified and crystallized using the hanging-drop vapour-diffusion method. Diffraction-quality crystals were grown at 293 K using Li(2)SO(4) as a precipitant. Using synchrotron radiation, data for the hThrsp SeMet derivative, hThrsp9 and its SeMet derivative were collected to 4.0, 3.0 and 3.6 Å resolution, respectively, at 100 K. The crystals of full-length hThrsp and its SeMet derivative belonged to space group P4(1)2(1)2, with approximate unit-cell parameters a = b = 123.9, c = 242.1 Å, α = β = γ = 90.0°. In contrast, the crystals of the truncated hThrsp9 and its SeMet derivative belonged to space group P2(1)2(1)2(1), with approximate unit-cell parameters a = 91.6, b = 100.8, c = 193.7 Å, α = β = γ = 90.0°. A molecular-replacement solution calculated using a murine Spot 14 structure as a search model indicated the presence of six molecules per asymmetric unit, comprising three hThrsp homodimers.

Novel Fold and Carbohydrate Specificity of the Potent Anti-HIV Cyanobacterial Lectin from Oscillatoria agardhii

Oscillatoria agardhii agglutinin (OAA) is a recently discovered cyanobacterial lectin that exhibits potent anti-HIV activity. Up to now, only its primary structure and carbohydrate binding data have been available. To elucidate the structural basis for the antiviral mechanism of OAA, we determined the structure of this lectin by x-ray crystallography at 1.2 Å resolution and mapped the specific carbohydrate recognition sites of OAA by NMR spectroscopy. The overall architecture of OAA comprises 10 β-strands that fold into a single, compact, β-barrel-like domain, creating a unique topology compared with all known protein structures in the Protein Data Bank. OAA sugar binding was tested against Man-9 and various disaccharide components of Man-9. Two symmetric carbohydrate-binding sites were located on the protein, and a preference for Manα(1-6)Man-linked sugars was found. Altogether, our structural results explain the antiviral activity OAA and add to the growing body of knowledge about antiviral lectins.

Mutation of High-Affinity Methionine Permease Contributes to Selenomethionyl Protein Production in Saccharomyces cerevisiae

The production of selenomethionine (SeMet) derivatives of recombinant proteins allows phase determination by single-wavelength or multiwavelength anomalous dispersion phasing in X-ray crystallography, and this popular approach has permitted the crystal structures of numerous proteins to be determined. Although yeast is an ideal host for the production of large amounts of eukaryotic proteins that require posttranslational modification, the toxic effects of SeMet often interfere with the preparation of protein derivatives containing this compound. We previously isolated a mutant strain (SMR-94) of the methylotrophic yeast Pichia pastoris that is resistant to both SeMet and selenate and demonstrated its applicability for the production of proteins suitable for X-ray crystallographic analysis. However, the molecular basis for resistance to SeMet by the SMR-94 strain remains unclear. Here, we report the characterization of SeMet-resistant mutants of Saccharomyces cerevisiae and the identification of a mutant allele of the MUP1 gene encoding high-affinity methionine permease, which confers SeMet resistance. Although the total methionine uptake by the mup1 mutant (the SRY5-7 strain) decreased to 47% of the wild-type level, it was able to incorporate SeMet into the overexpressed epidermal growth factor peptide with 73% occupancy, indicating the importance of the moderate uptake of SeMet by amino acid permeases other than Mup1p for the alleviation of SeMet toxicity. In addition, under standard culture conditions, the mup1 mutant showed higher productivity of the SeMet derivative relative to other SeMet-resistant mutants. Based on these results, we conclude that the mup1 mutant would be useful for the preparation of selenomethionyl proteins for X-ray crystallography.

Putting an N-terminal end to the Clostridium thermocellum xylanase Xyn10B story: Crystal structure of the CBM22-1–GH10 modules complexed with xylohexaose

In general, plant cell wall degrading enzymes are modular proteins containing catalytic domains linked to one or more non-catalytic carbohydrate-binding modules (CBMs). Xyn10B from Clostridium thermocellum is a typical modular enzyme containing an N-terminal family 22 CBM (CBM22-1), a family 10 glycoside hydrolase catalytic domain (GH10), a second CBM22 (CBM22-2), a dockerin sequence and a C-terminal family 1 carbohydrate esterase (CE1) catalytic domain. The structure of the N-terminal bi-modular CBM22-1-GH10 component of Xyn10B has been determined using a SeMet derivative by SAD to 2.5Å. The data was extended to 2.0Å for the non-SeMet mutant complexed with xylohexaose. CBM22-1-GH10 is a 60kDa protein with an E337A mutation to render the GH10 subunit inactive. Three of the six xylose residues of xylohexaose are shown to be bound in the inactivated GH10 substrate binding cleft, with the other three sugars presumably disordered in the solvent channel. The protein is a dimer in the asymmetric unit with extensive surface contacts between the two GH10 modules and between the CBM22-1 and GH10 modules. Residues from helix H4 of the GH10 module provide the major contacts by fitting into the minor groove of the CBM22-1 module. The orientation of CBM22-1 is such that it would allow the substrate to be loosely bound and subsequently delivered to the active site in a processive manner.

Crystal Structure of a Mucus-binding Protein Repeat Reveals an Unexpected Functional Immunoglobulin Binding Activity

Lactobacillus reuteri mucus-binding protein (MUB) is a cell-surface protein that is involved in bacterial interaction with mucus and colonization of the digestive tract. The 353-kDa mature protein is representative of a broadly important class of adhesins that have remained relatively poorly characterized due to their large size and highly modular nature. MUB contains two different types of repeats (Mub1 and Mub2) present in six and eight copies, respectively, and shown to be responsible for the adherence to intestinal mucus. Here we report the 1.8-A resolution crystal structure of a type 2 Mub repeat (184 amino acids) comprising two structurally related domains resembling the functional repeat found in a family of immunoglobulin (Ig)-binding proteins. The N-terminal domain bears striking structural similarity to the repeat unit of Protein L (PpL) from Peptostreptococcus magnus, suggesting binding in a non-immune Fab-dependent manner. A distorted PpL-like fold is also seen in the C-terminal domain. As with PpL, Mub repeats were able to interact in vitro with a large repertoire of mammalian Igs, including secretory IgA. This hitherto undetected activity is consistent with the current model that antibody responses against commensal flora are of broad specificity and low affinity.

A description of the structural determination procedures of a gap junction channel at 3.5 A resolution.

Intercellular signalling is an essential characteristic of multicellular organisms. Gap junctions, which consist of arrays of intercellular channels, permit the exchange of ions and small molecules between adjacent cells. Here, the structural determination of a gap junction channel composed of connexin 26 (Cx26) at 3.5 A resolution is described. During each step of the purification process, the protein was examined using electron microscopy and/or dynamic light scattering. Dehydration of the crystals improved the resolution limits. Phase refinement using multi-crystal averaging in conjunction with noncrystallographic symmetry averaging based on strictly determined noncrystallographic symmetry operators resulted in an electron-density map for model building. The amino-acid sequence of a protomer structure consisting of the amino-terminal helix, four transmembrane helices and two extracellular loops was assigned to the electron-density map. The amino-acid assignment was confirmed using six selenomethionine (SeMet) sites in the difference Fourier map of the SeMet derivative and three intramolecular disulfide bonds in the anomalous difference Fourier map of the native crystal.

Interpreting a Low Resolution Map of Human U1 snRNP Using Anomalous Scatterers

SummaryWe recently determined the crystal structure of the functional core of human U1 snRNP, consisting of nine proteins and one RNA, based on a 5.5 Å resolution electron density map. At 5–7 Å resolution, α helices and β sheets appear as rods and slabs, respectively, hence it is not possible to determine protein fold de novo. Using inverse beam geometry, accurate anomalous signals were obtained from weakly diffracting and radiation sensitive P1 crystals. We were able to locate anomalous scatterers with positional errors below 2 Å. This enabled us not only to place protein domains of known structure accurately into the map but also to trace an extended polypeptide chain, of previously undetermined structure, using selenomethionine derivatives of single methionine mutants spaced along the sequence. This method of Se-Met scanning, in combination with structure prediction, is a powerful tool for building a protein of unknown fold into a low resolution electron density map.

Crystal structure and association behaviour of the GluR2 amino-terminal domain

Fast excitatory neurotransmission is mediated largely by ionotropic glutamate receptors (iGluRs), tetrameric, ligand-gated ion channel proteins comprised of three subfamilies, AMPA, kainate and NMDA receptors, with each subfamily sharing a common, modular-domain architecture. For all receptor subfamilies, active channels are exclusively formed by assemblages of subunits within the same subfamily, a molecular process principally encoded by the amino-terminal domain (ATD). However, the molecular basis by which the ATD guides subfamily-specific receptor assembly is not known. Here we show that AMPA receptor GluR1- and GluR2-ATDs form tightly associated dimers and, by the analysis of crystal structures of the GluR2-ATD, propose mechanisms by which the ATD guides subfamily-specific receptor assembly.

Crystallographic Insights into the Autocatalytic Assembly Mechanism of a Bacteriophage Tail Spike

The tailed bacteriophage phi29 has 12 "appendages" (gene product 12, gp12) attached to its neck region that participate in host cell recognition and entry. In the cell, monomeric gp12 undergoes proteolytic processing that releases the C-terminal domain during assembly into trimers. We report here crystal structures of the protein before and after catalytic processing and show that the C-terminal domain of gp12 is an "autochaperone" that aids trimerization. We also show that autocleavage of the C-terminal domain is a posttrimerization event that is followed by a unique ATP-dependent release. The posttranslationally modified N-terminal part has three domains that function to attach the appendages to the phage, digest the cell wall teichoic acids, and bind irreversibly to the host, respectively. Structural and sequence comparisons suggest that some eukaryotic and bacterial viruses as well as bacterial adhesins might have a similar maturation mechanism as is performed by phi29 gp12 for Bacillus subtilis.

Cloning, expression, purification, crystallization and preliminary X-ray analysis of NodS N-methyltransferase fromBradyrhizobium japonicumWM9

The Nod factor (NF) is a rhizobial signal molecule that is involved in recognition of a legume host and the formation of root and stem nodules. Some unique enzymes are involved in the biosynthesis of NF, which is a variously but specifically substituted lipochitooligosaccharide. One of these enzymes is NodS, an N-methyltransferase that methylates end-deacetylated chitooligosaccharide substrates. In the methylation reaction, NodS uses S-adenosyl-L-methionine (SAM) as a methyl donor. To date, no structural information is available about NodS from any rhizobium. X-ray crystallographic studies of the NodS protein from Bradyrhizobium japonicum WM9, which infects the legumes lupin and serradella, have been undertaken. The nodS gene was cloned and the recombinant protein was expressed in Escherichia coli cells using natural amino acids and as an SeMet derivative. NodS without ligands was crystallized in the presence of PEG 3350 and MgCl(2). The protein was also crystallized in complex with S-adenosyl-L-homocysteine (SAH) in the presence of PEG 8000 and MgCl(2). SAH is produced from SAM as a byproduct of the methylation reaction. The crystals of apo NodS are tetragonal and diffracted X-rays to 2.42 A resolution. The NodS-SAH complex crystallizes in an orthorhombic space group and the crystals diffracted X-rays to 1.85 A resolution.

Overproduction, crystallization and preliminary X-ray characterization of Abn2, an endo-1,5-α-arabinanase fromBacillus subtilis

Two Bacillus subtilis extracellular endo-1,5-alpha-L-arabinanases, AbnA and Abn2, belonging to glycoside hydrolase family 43 have been identified. The recently characterized Abn2 protein hydrolyzes arabinan and has low identity to other reported 1,5-alpha-L-arabinanases. Abn2 and its selenomethionine (SeMet) derivative have been purified and crystallized. Crystals appeared in two different space groups: P1, with unit-cell parameters a = 51.9, b = 57.6, c = 86.2 A, alpha = 82.3, beta = 87.9, gamma = 63.6 degrees , and P2(1)2(1)2(1), with unit-cell parameters a = 57.9, b = 163.3, c = 202.0 A. X-ray data have been collected for the native and the SeMet derivative to 1.9 and 2.7 A resolution, respectively. An initial model of Abn2 is being built in the SeMet-phased map.

Structure of the Bacteriophage φKZ Lytic Transglycosylase gp144

Lytic transglycosylases are enzymes that act on the peptidoglycan of bacterial cell walls. They cleave the glycosidic linkage between N-acetylmuramoyl and N-acetylglucosaminyl residues with the concomitant formation of a 1,6-anhydromuramoyl product. The x-ray structure of the lytic transglycosylase gp144 from the Pseudomonas bacteriophage phi KZ has been determined to 2.5-A resolution. This protein is probably employed by the bacteriophage in the late stage of the virus reproduction cycle to destroy the bacterial cell wall to release the phage progeny. phi KZ gp144 is a 260-residue alpha-helical protein composed of a 70-residue N-terminal cell wall-binding domain and a C-terminal catalytic domain. The fold of the N-terminal domain is similar to the peptidoglycan-binding domain from Streptomyces albus G D-Ala-D-Ala carboxypeptidase and to the N-terminal prodomain of human metalloproteinases that act on extracellular matrices. The C-terminal catalytic domain of gp144 has a structural similarity to the catalytic domain of the transglycosylase Slt70 from Escherichia coli and to lysozymes. The gp144 catalytic domain has an elongated groove that can bind at least five sugar residues at sites A-E. As in other lysozymes, the peptidoglycan cleavage (catalyzed by Glu 115 in gp144) occurs between sugar-binding subsites D and E. The x-ray structure of the phi KZ transglycosylase complexed with the chitotetraose (N-acetylglucosamine)(4) has been determined to 2.6-A resolution. The N-acetylglucosamine residues of the chitotetraose bind in sites A-D.

Crystallization and preliminary X-ray analysis of MotY, a stator component of the Vibrio alginolyticus polar flagellar motor.

The polar flagellum of Vibrio alginolyticus is rotated by the sodium motor. The stator unit of the sodium motor consists of four different proteins: PomA, PomB, MotX and MotY. MotX and MotY, which are unique components of the sodium motor, form the T-ring structure attached to the LP ring in the periplasmic space. MotY has a putative peptidoglycan-binding motif in its C-terminal region and MotX is suggested to interact with PomB. Thus, MotX and MotY are thought to be required for incorporation and stabilization of the PomA/B complex. In this study, mature MotY composed of 272 amino-acid residues and its SeMet derivative were expressed with a C-terminal hexahistidine-tag sequence, purified and crystallized. Native crystals were grown in the hexagonal space group P6(1)22/P6(5)22, with unit-cell parameters a = b = 104.1, c = 132.6 A. SeMet-derivative crystals belonged to the same space group with the same unit-cell parameters as the native crystals. Anomalous difference Patterson maps of the SeMet derivative showed significant peaks in their Harker sections, indicating that the derivatives are suitable for structure determination.

Cloning, expression, purification, crystallization and preliminary structure determination of glucose-1-phosphate uridylyltransferase (UgpG) from Sphingomonas elodea ATCC 31461 bound to glucose-1-phosphate.

The cloning, expression, purification, crystallization and preliminary crystallographic analysis of glucose-1-phosphate uridylyltransferase (UgpG) from Sphingomonas elodea ATCC 31461 bound to glucose-1-phosphate are reported. Diffraction data sets were obtained from seven crystal forms in five different space groups, with highest resolutions ranging from 4.20 to 2.65 A. The phase problem was solved for a P2(1) crystal form using multiple isomorphous replacement with anomalous scattering from an osmium derivative and a SeMet derivative. The best native crystal in space group P2(1) has unit-cell parameters a = 105.5, b = 85.7, c = 151.8 A, beta = 105.2 degrees . Model building and refinement are currently under way.

Crystallization and preliminary X-ray diffraction analysis of the C-terminal domain of an archaeal transcription regulator

Little information is available on transcription regulation in Archaea, the third domain of life. Characterized archaeal regulators mostly belong to the Bacterial/Archaeal superfamily of Lrp-like transcription regulators (Lrp= Leucine-responsiveRegulatory Protein) [1]. One such example is Ss-LrpB from Sulfolobus solfataricus, which is a hyperthermoacidophilic organism growing optimally at 80°C and a pH between 2 and 3. Crystal structures of two Lrp-like proteins, both archaeal, have been determined: LrpA from Pyrococcus furiosus [2] and FL11 from PyrococcusOT3 [3]. Lrp-like proteins are composed of an N-terminal DNA-binding domain with a helix-turn-helix motif and a C-terminal ab-sandwich (babbab-fold), also called RAM domain (RAM=Regulation of Amino acid Metabolism). These two domains are connected by a flexible linker. Ss-LrpB binds its own control region [4], as do most Lrp-like proteins. This binding occurs cooperatively at three regularly spaced 15 bp binding sites with as consensus the palindromic sequence 5’-TTGYAWWWWWTRCAA-3’ (Y=pyrimidine, R=purine, W=weak bp). Due to the low solubility of Ss-LrpB, the C-terminal domain (comprising residues 69 to 147 of the full-length protein, omitting the hydrophobic linker) was cloned separately as a His-tag derivative and purified, aiming at a structural analysis. We succeeded in crystallizing this protein using the hanging-drop vapour-diffusionmethod in two different conditions [5]. Crystals, formed in one condition (100 mM NaPO4, 100 mM KPO4, 100 mM MES pH 6.5, 2.0 M NaCl), belong to the space group P21212 with unit-cell parameters a = 59.35 A; b = 74.86 A; c = 38.08 A and diffracted to 1.8 A resolution. Preliminary attempts at molecular replacement with the C-terminal part of LrpA as model (27.8 % amino acid identity, 55.7 % similarity), as well the dimer as the monomer, have not been successful. In order to solve the structure a Se-Met derivative is being prepared.

Expression, purification, crystallization and preliminary diffraction data characterization ofEscherichia coliribonuclease II (RNase II)

RNA degradation is important in the post-transcriptional control of gene expression. The processing, degradation and quality control of RNA is performed by many different classes of ribonucleases. Ribonuclease II (RNase II) is a 643-amino-acid enzyme that degrades single-stranded RNA from its 3'-end, releasing ribonucleoside 5'-monophosphates. RNase II was expressed both as the wild type and as a D209N mutant form. The latter was also produced as an SeMet derivative. The various protein forms were crystallized using the vapour-diffusion method. Wild-type RNase II was crystallized in two crystal forms, both of which belonged to space group P2(1). X-ray diffraction data were collected to 2.44 and 2.75 angstroms resolution, with unit-cell parameters a = 56.8, b = 125.7, c = 66.2 angstroms, beta = 111.9 degrees and a = 119.6, b = 57.2, c = 121.2 angstroms, beta = 99.7 degrees, respectively. The RNase II D209N mutant gave crystals that belonged to space group P6(5), with unit-cell parameters a = b = 86.3, c = 279.2 angstroms, and diffracted to 2.74 angstroms. Diffraction data from the mutant and its SeMet derivative enabled the determination of a partial Se-atom substructure by SIRAS.

Crystal Structure of the Severe Acute Respiratory Syndrome (SARS) Coronavirus Nucleocapsid Protein Dimerization Domain Reveals Evolutionary Linkage between Corona- and Arteriviridae

The causative agent of severe acute respiratory syndrome (SARS) is the SARS-associated coronavirus, SARS-CoV. The nucleocapsid (N) protein plays an essential role in SARS-CoV genome packaging and virion assembly. We have previously shown that SARS-CoV N protein forms a dimer in solution through its C-terminal domain. In this study, the crystal structure of the dimerization domain, consisting of residues 270–370, is determined to 1.75Å resolution. The structure shows a dimer with extensive interactions between the two subunits, suggesting that the dimeric form of the N protein is the functional unit in vivo. Although lacking significant sequence similarity, the dimerization domain of SARS-CoV N protein has a fold similar to that of the nucleocapsid protein of the porcine reproductive and respiratory syndrome virus. This finding provides structural evidence of the evolutionary link between Coronaviridae and Arteriviridae, suggesting that the N proteins of both viruses have a common origin.