Self-trapped Exciton Emission Research Articles

Controllable Multi-Exciton Zero-Dimensional Antimony-Based Metal Halides for White-light Emission and β-Ray Detection.

Self-trapped exciton (STE) emission, typified by antimony (Sb), with broadband characteristics, represents the next generation of materials for solid-state lighting and radiation detection. However, little is known about the multiexciton behavior of the Sb emission center. Here, we proposed a general approach for designing antimony-centered multi-exciton emitting materials through self-assembly. Benefitting from controllable multiexciton behavior, dual-band white light emission spanning the entire visible spectrum was achieved. Relying on the reduction of an effective atomic number brought by self-assembly, excellent scintillation response to β-rays was attained. This study offers unprecedented insight into hybrid single/triple STE emission and unveils new avenues for single-emitter white-light emission, as well as radiographic testing using low-risk β-rays as sources.

Warm-White Light Emission of Lead-free CsAg2I3 Single Crystal Scintillator with a One-Dimensional Electronic Structure.

Presently, the exploration of novel inorganic lead-free perovskite scintillators has emerged as a prominent topic in the field of perovskite materials. Extensive attention has been garnered by materials such as Cs3Cu2I5 due to their notable advantage in scintillation intensity, but the response time constants in the microsecond or even millisecond range severely constrain their potential applications in scintillators. In this study, large-sized (5-6 mm) CsAg2I3 single crystals with an ultrafast warm-white light emission on a nanosecond time scale are presented. Specifically, upon X-ray excitation, the single crystal demonstrates a broad-spectrum white light emission with a color temperature as high as 5129 K, attributed to its self-trapped exciton emission. The 137Cs energy spectrum reveals that CsAg2I3 possesses an ultrafast response for γ rays with a time constant of 15 ns, which is significantly faster than that of Cs3Cu2I5. Furthermore, time-resolved photoluminescence unveils a subnanosecond component with a response time of 0.9 ns. The characteristics of ultrafast warm-white light emission exhibit the significant potential of CsAg2I3 in radiation scintillation detection and its probability of playing a pivotal role in future radiation detection technology.

Lattice distortion enhanced self-trapped excitons emission in antimony halide crystalline clusters

Lattice distortion enhanced self-trapped excitons emission in antimony halide crystalline clusters

Pressure-controlled luminescence in fast-response barium fluoride crystals

Cross-luminescence (CL) in a barium fluoride (BaF2) scintillator arising from the recombination of a valence band electron and a core band hole results in a fast picosecond decay time. However, the CL emission wavelength in the vacuum ultraviolet region is difficult to detect, and intrinsically intense and slow nanosecond self-trapped exciton (STE) luminescence occurs. Herein, we report a redshift in the CL emission wavelength with high-pressure application. The wavelength of the CL emission shifted from 221 nm to 240 nm when 5.0 GPa was applied via a sapphire anvil cell. Increasing the pressure decreases the core-valence bandgap due to the downward expansion of the valence band, resulting in a decrease in the valence band minimum. The onset of a phase transition from a cubic crystal structure to an orthorhombic crystal structure at 3.7 GPa inhibited the recombination of conduction band electrons and self-trapped holes, leading to the disappearance of the STE emission. Manipulating the band structure of BaF2 by high-pressure application enables control of its luminescence emission, providing a pathway toward solving the problems inherent in this leading fast-response scintillator.

Synthesis of β-Ga2O3:Mg Thin Films by Electron Beam Evaporation and Postannealing

Doping divalent metal cations into Ga2O3 films plays a key role in adjusting the conductive behavior of the film. N-type high-resistivity β-Ga2O3:Mg films were prepared using electron beam evaporation and subsequent postannealing processing. Various characterization methods (X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescence, etc.) revealed that the Mg content plays an important role in affecting the film quality. Specifically, when the Mg content in the film is 3.6%, the S2 film’s resistivity, carrier content, and carrier mobility are 59655.5 Ω·cm, 1.95 × 1014 cm3/C, and 0.53682 cm2/Vs. Also, the film exhibits a smoother surface, more refined grains, and higher self-trapped exciton emission efficiency. The Mg cation mainly substitutes the Ga+ cation at a tetrahedral site, acting as a trap for self-trapped holes.

Synthesis of low-dimensional metal halide CsAgCl2 for X-ray scintillation applications

Low-dimensional metal halides, which possess efficient luminescent properties, have garnered significant interest in the fields of optoelectronics and radiation detection. This study introduces novel lead-free silver-based metal halide material, CsAgCl2 microcrystals (MCs). These MCs have a one-dimensional atomic chain structure and a unique [AgCl5]4- tetragonal shared triangular configuration. CsAgCl2 MCs exhibit excellent performance as X-ray scintillators due to their bright broadband yellow emission and fast decay time in the microsecond range. The large Stokes shift of 350 nm is produced by self-trapped exciton emission. In X-ray scintillation applications, CsAgCl2 MCs demonstrate a high light yield of 13280 photons/MeV and a wide range of linear scintillation response. It is noteworthy that the CsAgCl2 MCs maintain good stability under both atmospheric conditions and continuous X-ray irradiation. The sample was used in an X-ray imaging screen, which clearly presented the X-ray projection image of a wooden stick. As a result, this research not only contributes to the collection of lead-free metal halide scintillators but also indicates that CsAgCl2 MCs have a wide range of future applications and potential in areas such as medical imaging, scientific research, and diagnostic and detection technologies.

Dual-Band Emission from Intrinsic and Extrinsic Self-Trapped Excitons in a Zero-Dimensional Copper Halide Cs3Cu2Br5.

Zero-dimensional Cs3Cu2X5 (X=Cl, Br, or I), the intensively studied light-emitting materials, generally exhibit single-band emissions from intrinsic self-trapped excitons (STEs), while defect-induced (extrinsic) STEs were considered nonemissive. Herein, we observed a dual-band emission from intrinsic and extrinsic STEs for Cs3Cu2Br5 at low temperature, and their emission mechanisms are elucidated. The intrinsic and extrinsic STEs are trapped from different initial states, with remarkably large trapping depths (>900 meV) evaluated at 50 K, indicating their negligible detrapping rates. In addition, the stronger electron-phonon coupling for extrinsic STE could shift the extrinsic STE band to intersect with the ground state in the configuration coordinate diagram, acting as a nonradiative pathway. This explains the vanishment of extrinsic STE emission at room temperature and the reported low photoluminescence quantum yields (<50%). With growing efforts to obtain multiple-band emitters, our insights into the emission mechanisms of intrinsic and extrinsic STEs provide valuable bases for further material engineering.

Achieving efficient self-trapped excitons emission by suppressing defect level in Sb3+ doped metal halide

The field of metal halide engineering has made considerable progress, yet additional studies are needed to completely grasp the intriguing principles that govern their luminescence. In this work, we report a novel zero-dimensional (0D) organic-inorganic metal halide hybrid (OIMH) (C3H12N2)2InCl7 (C3H12N2 = 1,3-propane diamine cation) and reveal its interesting luminescent properties through experimental research and theoretical calculations. The photoluminescence (PL) of (C3H12N2)2InCl7 is a synergistic combination of intrinsic self-trapped exciton (STE) emission and defect-bound exciton (DBE) emission. Doping with Sb3+ induces several changes in (C3H12N2)2InCl7, including defect passivation, a reduction in the band gap, and structural shrinkage. These modifications result in a transition of PL centers to external STE emission, with the photoluminescence quantum yield (PLQY) increasing from 4.44 % to 68.70 %. Our work proposes, for the first time, the synergistic emission of STE and DBE and reveals the effect of metal ion doping, providing new insights into the mechanisms of materials exhibiting multifunctional exciton emission.

Light emission from multiple self-trapped excitons in one-dimensional Ag-based ternary halides

Abstract Ternary metal halides based on Cu(I) and Ag(I) have attracted intensive attention in optoelectronic applications due to their excellent luminescent properties, low toxicity, and robust stability. While the self-trapped excitons (STEs) emission mechanisms of Cu(I) halides are well understood, the STEs in Ag(I) halides remain less thoroughly explored. This study explores the STE emission efficiency within the A 2AgX 3 (A = Rb, Cs; X = Cl, Br, I) system by identifying three distinct STE states in each material and calculating their configuration coordinate diagrams. We find that the STE emission efficiency in this system is mainly determined by STE stability and influenced by self-trapping and quenching barriers. Moreover, we investigate the impact of structural compactness on emission efficiency and find that the excessive electron–phonon coupling in this system can be reduced by increasing the structural compactness. The atomic packing factor is identified as a low-cost and effective descriptor for predicting STE emission efficiency in both Cs2AgX 3 and Rb2AgX 3 systems. These findings can deepen our understanding of STE behavior in metal halide materials and offer valuable insights for the design of efficient STE luminescent materials. The datasets presented in this paper are openly available in Science Data Bank at https://doi.org/10.57760/sciencedb.12094.

Ultrabroad Near Infrared Emitting Perovskites.

Phosphor converted light emitting diodes (pc-LEDs) have revolutionized solid-state white lighting by replacing energy-inefficient filament-based incandescent lamps. However, such a pc-LED emitting ultrabroad near-infrared (NIR) radiations still remains a challenge, primarily because of the lack of ultrabroad NIR emitting phosphors. To address this issue, we have prepared 2.5 % W4+-doped and 2.8 % Mo4+-doped Cs2Na0.95Ag0.05BiCl6 perovskites emitting ultrabroad NIR radiation with unprecedented spectral widths of 434 and 468 nm, respectively. Upon band-edge excitation, the soft lattice of the host exhibits broad self-trapped exciton (STE) emission covering NIR-I (700 nm), which then nonradiatively excites the dopants. The -donor ligand Cl- reduces the energy of dopant d-d transitions emitting NIR-II with a peak at ~950 nm. Vibronic coupling broadens the dopant emission. The large spin-orbit coupling and local structural distortion might possibly enhance the dopant emission intensity, leading to an overall NIR photoluminescence quantum yield ~40 %. The composite of our ultrabroad NIR phosphors with biodegradable polymer polylactic acid could be processed into free-standing films and 3D printed structures. Large (170 170 ), robust, and thermally stable 3D printed pc-LED panels emit ultrabroad NIR radiation, demonstrating NIR imaging applications.

Structure Evolution and Optical Tuning of One-Dimensional Post-perovskite (TDMP)PbBr4 under High Pressure.

Optimizing the structure and tuning the optical properties in low-dimensional organic-inorganic halide perovskites are crucial to practical applications for stable solid-state lighting. Herein, we performed high-pressure investigations on one-dimensional (1D) postperovskite (TDMP)PbBr4 (TDMP = trans-2,5-dimethylpiperaziniium), and structure and optical properties under pressure are studied. (TDMP)PbBr4 exhibits color tunable emission from cool white light to yellow orange as the pressure increases from atmospheric pressure to 20.0 GPa. It was found that high pressure would facilitate trapping the free exciton (free exciton) to form a self-trapped exciton (STE) state due to increased electron-phonon interaction, thus enhancing STE emission in the pressure range of 4.0-7.0 GPa. At above 7.0 GPa, the STE emission is quenched, which is due to the phonon-assisted nonradiative relaxation. Meanwhile, (TDMP)PbBr4 displays reversible piezochromism from colorless to yellow under pressure as a result of the compound undergoing a reversible structural transformation. This work provides an insightful perspective on revealing the relationship between structure and optical properties of 1D postperovskites under high pressure.

Toward an Ideal Light Source for Indoor Photosynthesis: Broadband Red Emission in Zero-Dimensional Hafnium-Based Metal Halide (TPP)2HfCl6·4C2H3N:Sb3.

With suitable electron-phonon coupling strength, a near-unity broadband photoluminescence quantum yield (PLQY) can be achieved in organic-inorganic hybrid metal halides (OIHMHs) via self-trapped exciton (STE) emission. However, it is still challenging to obtain high-quality red emission from OIHMHs with a desirable emission wavelength and high chemical stability, which hinders their practical application in high-performance displays, plant-growth lighting, and biomedical imaging. Herein, a series of hafnium-based zero-dimensional (TPP)2HfCl6·4C2H3N (TPP: tetraphenylphosphonium) single crystals with different Sb3+ doping levels are synthesized. The Sb3+-doped (TPP)2HfCl6·4C2H3N shows dual-band red emission with a full width at half-maximum of 178 nm and a high PLQY of 91.09%. This broad dual-band emission originates from dopant-induced extrinsic free excitons and STEs. Furthermore, (TPP)2HfCl6·4C2H3N:Sb3+ was employed as a luminescence converter in a light-emitting diode (LED) for plant growth regulation. A correlated color temperature of 4055 K and a color rendering index of 82.13 were achieved upon excitation of the LED at 365 nm. These results provide fundamental perspectives on the emission behavior of Sb3+-doped OIHMHs and illustrate their promise for use in plant-growth lighting.

Reversible Structural Phase Transitions in Zero-Dimensional Cu(I)-Based Metal Halides for Dynamically Tunable Emissions.

Exploring structural phase transitions and luminescence mechanisms in zero-dimensional (0D) metal halides poses significant challenges, that are crucial for unlocking the full potential of tunable optical properties and diversifying their functional capabilities. Herein, we have designed two inter-transformable 0D Cu(I)-based metal halides, namely (C19H18P)2CuI3 and (C19H18P)2Cu4I6, through distinct synthesis conditions utilizing identical reactants. Their optical properties and luminescence mechanisms were systematically elucidated by experiments combined with density functional theory calculations. The bright cyan-fluorescent (C19H18P)2CuI3 with high photoluminescence quantum yield (PLQY) of 77 % is attributed to the self-trapped exciton emission. Differently, the broad yellow-orange fluorescence of (C19H18P)2Cu4I6 displays a remarkable PLQY of 83 %. Its luminescence mechanism is mainly attributed to the combined effects of metal/halide-to-ligand charge transfer and cluster-centered charge transfer, which effects stem from the strong Cu-Cu bonding interactions in the (Cu4I6)2- clusters. Moreover, (C19H18P)2CuI3 and (C19H18P)2Cu4I6 exhibit reversible structural phase transitions. The elucidation of the phase transitions mechanism has paved the way for an unforgeable anti-counterfeiting system. This system dynamically shifts between cyan and yellow-orange fluorescence, triggered by the phase transitions, bolstering security and authenticity. This work enriches the luminescence theory of 0D metal halides, offering novel strategies for optical property modulation and fostering optical applications.

Investigation of the temperature-dependent photoluminescence characteristics in Mn2+-doped (PEA)2PbBr4 perovskite

The two-dimensional organic-inorganic hybrid perovskites demonstrate significant potential for use in photodetectors and white light-emitting diodes. In this study, we successfully synthesized pure and Mn2+-doped (PEA)2PbBr4 perovskite via rapid crystallization. The morphology, structure, magnetic properties, and optical characteristics of them were comprehensively characterized. The unusual behavior of free exciton emission is mainly attributed to electron-phonon coupling and negative thermal quenching effects. The self-trapped exciton emission results from self-trapped excited states and electron-phonon coupling. Moreover, energy transfer phenomena are observed between free exciton emission, self-trapped exciton emission, and Mn2+ emission. These findings offer valuable insights into the luminescence mechanism of two-dimensional layered perovskites.

Mechanism of Pressure-Modulated Self-Trapped Exciton Emission in Cs2TeCl6 Double Perovskite.

Pressure-modulated self-trapped exciton (STE) emission mechanism in all-inorganic lead-free metal halide double perovskites characterized by large Stokes-shifted broadband emission, has attracted much attention across various fields such as optics, optoelectronics, and biomedical sciences. Here, by employing the all-inorganic lead-free metal halide double perovskite Cs2TeCl6 as a paradigm, the authors elucidate that the performance of STE emission can be modulated by pressure, attributable to the pressure-induced evolution of the electronic state (ES). Two ES transitions happen at pressures of 1.6 and 5.8GPa, sequentially. The electronic behaviors of Cs2TeCl6 can be jointly modulated by both pressure and ES transitions. When the pressure reaches 1.6GPa, the Huang-Rhys factor S, indicative of the strength of electron-phonon coupling, attains an optimum value of ≈12.0, correlating with the pressure-induced photoluminescence (PL) intensity of Cs2TeCl6 is 4.8-fold that of its PL intensity under ambient pressure. Through analyzing the pressure-dependent STE dynamic behavioral changes, the authors have revealed the microphysical mechanism underlying the pressure-modulated enhancement and quenching of STE emission in Cs2TeCl6.

Incorporating Sb (III) and Bi (III) ions into Cs2AgNaInCl6 perovskite toward efficient white-light emission with high color rendering index

Single phosphor with efficient and high quality white-light emission is necessary for lighting applications. In this work, we report a double perovskite, Cs2AgNaInCl6 with Bi3+ and Sb3+ incorporation, which demonstrates excellent white-light properties including tunable emission component and correlated colour temperature (CCT). Using the broad-band emission of self-trapped excitons (STEs) associated with Bi3+ and Sb3+ in the Cs2AgNaInCl6 host, the blue and orange dual-band STEs emission located at 460 and 565 nm covers the entire visible range to achieve high-quality white light emission. The relative intensity of the dual emission components can be adjusted flexibly by modulating the doping ratio of Bi3+ and Sb3+. The dual STEs emission shares the same optimal excitation wavelength at 340 nm. The optimal sample of Bi3+ (1 %) and Sb3+ (10 %) codoped Cs2Ag0.1Na0.9InCl6 exhibits high color rendering index (CRI) of up to 93, and high photo-luminescence quantum yield (PLQY) of 76 %. This codoping in double perovskite approach represents a promising method for achieving high-quality white lighting application within a single phosphor.

Pressure-controlled free exciton and self-trapped exciton emission in quasi-one-dimensional hybrid lead bromides

Hybrid metal halides represent a novel type of semiconductor light emitters with intriguing excitonic emission properties, including free exciton emission and self-trapped exciton emission. Achieving precise control over these two excitonic emissions in hybrid metal halides is highly desired yet remains challenging. Here, the complete transformation from intrinsically broadband self-trapped exciton emission to distinctively sharp free exciton emission in a quasi-one-dimensional hybrid metal halide (C2H10N2)8[Pb4Br18]·6Br with a ribbon width of n = 4, is successfully achieved based on high-pressure method. During compression, pressure-induced phonon hardening continuously reduces exciton–phonon coupling, therefore suppressing excitonic localization and quenching the original self-trapped exciton emission. Notably, further compression triggers excitonic delocalization to induce intense free exciton emission, accompanied with reduced carrier effective masses and improved charge distribution. Controlled high-pressure investigations indicate that the ribbon width of n > 2 is necessary to realize excitonic delocalization and generate free exciton emissions in similar quasi-one-dimensional hybrid metal halides. This work presents an important photophysical process of excitonic transitions from self-trapped exciton emission to free exciton emission in quasi-one-dimensional hybrid metal halides without chemical regulation, promoting the rational synthesis of hybrid metal halides with desired excitonic emissions.

Enhanced fluorescence in Cs2ZnI4 powders by Cu doping

Cu+-doped metal halide Cs2ZnI4 phosphor powders were synthesized by a facile solid-state synthesis method. The introduction of Cu+ makes the weakly luminous Cs2ZnI4 emit stronger blue light around 450 nm. When the doping concentration is 5 %, the photoluminescence quantum yield (PLQY) is up to 17.76 %. This work provides a feasible strategy for the preparation of metal halide phosphors applied to blue-light-excitable LED devices, and also gives an insight into understanding self-trapped excitons (STEs) emission in zero-dimensional metal halides.

Interplay of Phonon Directionality and Emission Polarization in Two-Dimensional Layered Metal Halide Perovskites.

ConspectusLayered metal halide perovskites represent a natural quantum well system for charge carriers that provides rich physics, and the organic encapsulation of the inorganic metal halide layers not only increases their stability in devices but also provides an immense freedom to design their functionality. Intriguingly, these organic moieties strongly impact the optical, electrical, and mechanical properties, not only through their dielectric, elastic, and chemical properties but also because of induced mechanical distortions in the inorganic lattice. This tunability makes two-dimensional layered perovskites (2DLPs) highly attractive as light emitters. Common consensus is that exciton-phonon coupling plays an important role in radiative recombination. For bulk and some two-dimensional (2D) materials, the band edge emission broadening can be described by the classic models for polar inorganic semiconductors, while for the temperature dependence of the self-trapped exciton emission, an analysis developed for color centers has been successfully applied. For many 2DLPs these approaches do not work because of the complexity of their vibrational spectra. However, their emission is still strongly determined by phonons, and therefore, an adequate understanding of the electron-phonon coupling needs to be developed.With polarized and angle-resolved Raman spectroscopy studies on single 2DLP flakes based on different ammonium molecules as organic cations, in 2020 we revealed very rich phonon spectra in the low-frequency regime. Although the phonon bands at low frequency can generally be attributed to the vibrations of the inorganic lattice, we found very different responses by only changing the type of organic cations. In addition, the intensity of the different phonon modes depended strongly on the angle of the linearly polarized excitation beam with respect to the in-plane axes of the octahedron lattice. In 2022, we mapped this angular dependence of the phonon modes, which allowed identification of the directionality of the different lattice vibrations. By correlating the phonon spectra with the temperature-dependent emission for a set of 2DLPs that featured very different self-trapped exciton (STE) emission, we demonstrated that the exciton relaxation cannot be related to coupling with a single (longitudinal-optical) phonon band and that several phonon bands should be involved in the emission process. To gain insights into the exciton-phonon coupling effects on the band edge emission, we performed both angle-resolved polarized emission and Raman spectroscopy on single 2D lead iodide perovskite microcrystals. These experiments revealed the impact of the organic cations on the linear polarization of the emission and corroborated that multiple phonon bands should be involved in the radiative recombination process. Analysis of the temperature-dependent line width broadening of the band edge emission showed that for many systems, the behavior cannot be described by assuming the involvement of only one phonon mode in the electron-phonon coupling process. Our studies revealed a wealth of highly directional low-frequency phonons in 2DLPs from which several bands are involved in the emission process, which leads to diverse optical and vibrational properties depending on the type of organic cation in the material.

Exciton-harvesting enabled efficient charged particle detection in zero-dimensional halides

Materials for radiation detection are critically important and urgently demanded in diverse fields, starting from fundamental scientific research to medical diagnostics, homeland security, and environmental monitoring. Low-dimensional halides (LDHs) exhibiting efficient self-trapped exciton (STE) emission with high photoluminescence quantum yield (PLQY) have recently shown a great potential as scintillators. However, an overlooked issue of exciton-exciton interaction in LDHs under ionizing radiation hinders the broadening of its radiation detection applications. Here, we demonstrate an exceptional enhancement of exciton-harvesting efficiency in zero-dimensional (0D) Cs3Cu2I5:Tl halide single crystals by forming strongly localized Tl-bound excitons. Because of the suppression of non-radiative exciton-exciton interaction, an excellent α/β pulse-shape-discrimination (PSD) figure-of-merit (FoM) factor of 2.64, a superior rejection ratio of 10−9, and a high scintillation yield of 26 000 photons MeV−1 under 5.49 MeV α-ray are achieved in Cs3Cu2I5:Tl single crystals, outperforming the commercial ZnS:Ag/PVT composites for charged particle detection applications. Furthermore, a radiation detector prototype based on Cs3Cu2I5:Tl single crystal demonstrates the capability of identifying radioactive 220Rn gas for environmental radiation monitoring applications. We believe that the exciton-harvesting strategy proposed here can greatly boost the applications of LDHs materials.