Self-nanoemulsifying Drug Delivery System Research Articles

Enhancing the oral bioavailability of fisetin: polysaccharide-based self nano-emulsifying spheroids for colon-targeted delivery.

Fisetin (FS) is a flavonoid that possesses antioxidant and anti-inflammatory properties against ulcerative colitis. FS shows poor dissolution rate and permeability. An attempt has been made to develop colon-targeted solid self-nanoemulsifying drug delivery systems (S-SNEDDS) of FS. Initially, liquid (L) SNEDDS were prepared by loading FS into isotropic mixture of L-SNEDDS was prepared using Labrafil M 1944 CS, Transcutol P, and Tween 80. These L-SNEDDS were further converted into solid (S) SNEDDS by mixing the isotropic mixture with 1:1:1 ratio of guar gum (GG), xanthan gum (XG) and pectin (PC) [GG:XG:PC (1:1:1)]. Aerosil-200 (A-200) was added to enhance their flow characteristics. Further, they were converted into spheroids by extrusion-spheronization technique. The solid-state characterization of S-SNEDDS was done by SEM, DSC, and PXRD, which revealed that the crystalline form of FS was converted into the amorphous form. In the dissolution study, S-SNEDDS spheroids [GG:XG:PC (1:1:1)] exhibited less than 20% drug release within the first 5 h, followed by rapid release of the drug between the 5th and 10th h, indicating its release at colonic site. The site-specific delivery of FS to colon via FS-S-SNEDDS spheroids was confirmed by conducting pharmacokinetic studies on rats. Wherein, results showed delay in absorption of FS loaded in spheroids up to 5 h and achievement of Cmax at 7h, whereas L-SNEDDS showed rapid absorption of FS. Furthermore, FS-L-SNEDDS and FS-S-SNEDDS spheroids [GG:XG:PC (1:1:1)] increased oral bioavailability of FS by 6.86-fold and 4.44-fold, respectively, as compared to unprocessed FS.

Modified Release 3D-Printed Capsules Containing a Ketoprofen Self-Nanoemulsifying System for Personalized Medical Application.

This study explores the realm of personalized medicine by investigating the utilization of 3D-printed dosage forms, specifically focusing on patient-specific enteric capsules designed for the modified release of ketoprofen, serving as a model drug. The research investigates two distinct scenarios: the modification of drug release from 3D-printed capsules crafted from hydroxypropyl methylcellulose phthalate:polyethylene glycol (HPMCP:PEG) and poly(vinyl alcohol) (PVA), tailored for pH sensitivity and delayed release modes, respectively. Additionally, a novel ketoprofen-loaded self-nanoemulsifying drug delivery system (SNEDDS) based on pomegranate seed oil (PSO) was developed, characterized, and employed as a fill material for the capsules. Through the preparation and characterization of the HPMCP:PEG based filament via the hot-melt extrusion method, the study thoroughly investigated its thermal and mechanical properties. Notably, the in vitro drug release analysis unveiled the intricate interplay between ketoprofen release, polymer type, and capsule thickness. Furthermore, the incorporation of ketoprofen into the SNEDDS exhibited an enhancement in its in vitro cylooxygenase-2 (COX-2) inhibitory activity. These findings collectively underscore the potential of 3D printing in shaping tailored drug delivery systems, thereby contributing significantly to the advancement of personalized medicine.

Formulation of self-nanoemulsifying drug delivery system (SNEDDS) of combined 70% ethanolic of Begonia medicinalis herbs and Moringa oleifera leaves

Background: Benalu batu (Begonia medicinalis) and kelor leaves (Moringa oleifera) are empirically used as alternative therapies by people in Central Sulawesi to maintain their health. Our previous research showed that the combination of these two plant extracts possessed an immunomodulatory activity. Self-Nanoemulsifying Drug Delivery System (SNEDDS) formulation was performed to improve the extract's bioavailability, solubility and stability. Objective: This study aims to formulate and characterise SNEDDS preparations of combined ethanolic extract of B. medicinalis herbs and M. oleifera leaves and further test its stability. Method: SNEDDS formulation was started by screening for proper oil, surfactant, and co-surfactant. The formula was then optimised using a ternary phase diagram and characterisation. The stability test was performed using centrifugation, heating-cooling, and freeze-thaw cycles. Results: The optimal SNEDDS formula consists of isopropyl myristate (10%), tween 80 (50%) and propylene glycol (40%). The characterisation values obtained were: Transmittance value 83.785 ± 0.275%, particle size 18.666 ± 0.208 nm, polydispersity index 0.664 ± 0.0085, and zeta potential -39.20 ± 0.2 mV. The formula was stable during three stability evaluation tests. Conclusion: The optimal formula met the SNEDDS characteristics requirements and showed good stability.

A Comprehensive Guide to the Development, Evaluation, and Future Prospects of Self-nanoemulsifying Drug Delivery Systems for Poorly Water-soluble Drugs.

Self-nano Emulsifying Drug Delivery Systems (SNEDDS) are novel formulations that can enhance the solubility and bioavailability of poorly water-soluble drugs. SNEDDS are composed of lipids, surfactants, co-solvents, and drugs and can spontaneously form nanoemulsions when mixed with water under mild agitation. SNEDDS can be formulated as liquid or solid dosage forms and can improve drug absorption by increasing the interfacial area, protecting the drug from degradation, and facilitating lymphatic transport. SNEDDS is characterized by various parameters such as particle size, zeta potential, droplet morphology, emulsification efficiency, drug solubility, and stability. SNEDDS offers several advantages over conventional dosage forms, such as dose reduction, faster onset of action, reduced variability, versatility, and ease of formulation. However, SNEDDS also face some limitations and challenges, such as drug precipitation, cost-effectiveness, compatibility with capsule shells, and lack of predictive in vitro models. SNEDDS has a promising future in the field of pharmaceuticals, especially for personalized medicine and targeted drug delivery.

Formulation of Nanoemulsion of Gotu Kola (Centella asiatica (L.) Urban) Leaves Extract as Active Ingredients to Produce Antioxidant Facial Serum

Abstract: Free radicals can cause cell damage such as premature aging. To protect, ward off and stabilize free radicals, antioxidant compounds can be used. Plants that can be used as a source of antioxidants are gotu kola (Centella asiatica (L.) Urban). The aim of this research is formulating a nanoemulsion of gotu kola leaves extract as an active ingredient for producing the antioxidant serum. The steps of this research include: (1) extraction by maceration and Microwave-Assisted Extraction (MAE); (2) extract characterization; (3) formulation of nanoemulsion using Self-Nanoemulsifying Drug Delivery System (SNEDDS) method; (4) nanoemulsion testing: stability test, antioxidant activity test, and irritation test, (5) nanoemulsion characterization which includes particle size, transmittance, pH, and viscosity. The results showed that: (1) yields of the maceration method and MAE were 14,60% and 17,54%; (2) antioxidant compounds in gotu kola leaves extract are squalene, kaempferol, asiaticoside; The IC50 of the maceration and MAE extract were 93,152 ppm and 80,365 ppm; (3) nanoemulsions were made in 3 formulas (0,1; 0,3; and 0,5 g) with fixed variables of capryol 90, tween 20, and PEG 400 (1,5; 2,5; and 1); (4) stability test showed that only F1 was stable; the IC50 value of nanoemulsion is 2604,967 ppm; and the F1 irritation test showed no erythema and edema; (5) The particle size of F1 is 166,7 nm with a transmittance value of 97.4%, a pH of 5,33, and a viscosity of 75,35 cP.

Dissolution and antioxidant potential of apigenin self nanoemulsifying drug delivery system (SNEDDS) for oral delivery

Self-nanoemulsifying drug delivery systems (SNEDDS) have been used to improve the oral bioavailability of various drugs. In the current study, apigenin was developed as SNEDDS to solve its dissolution problem and enhance oral bioavailability and antioxidant potential. SNEDDS were prepared by mixing Gelucire 44/14, Tween 80, and PEG 400 under controlled conditions. The droplet of diluted SNEDDS demonstrated a spherical shape with a size of less than 100 nm and a neutral charge. The very fast self-emulsification was obtained within 32 s, and the transmittance values exceeded 99%. The highest drug loading was 90.10 ± 0.24% of the initial load with the highest %encapsulation efficiency of 84.20 ± 0.03%. FT-IR and DSC spectra showed no interaction between components. The dissolution in buffer pH 1.2, 4.5, and 6.8 showed significantly higher dissolved apigenin than the apigenin coarse powder. The dissolution profiles were fitted to the Korsmeyer–Peppas kinetics. The cellular antioxidant activities in Caco-2 cells were approximately 52.25–54.64% compared to no treatment and were higher than the apigenin coarse powder (12.70%). Our work highlights the potential of SNEDDS to enhance the dissolution and permeability of apigenin and promote antioxidant efficacy, which has a strong chance of being developed as a bioactive compound for nutraceuticals.

Solid Self-Nanoemulsifying Drug Delivery Systems of Furosemide: In Vivo Proof of Concept for Enhanced Predictable Therapeutic Response.

Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of -5.4 ± 0.55 and -6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 μL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 μL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide.

Isotretinoin self-nano-emulsifying drug delivery system: Preparation, optimization and antibacterial evaluation

PurposeIsotretinoin (ITN) is a poorly water-soluble drug. The objective of this study was to design a successful liquid self-nanoemulsifying drug delivery system (L-SNEDDS) for ITN to improve its solubility, dissolution rate, and antibacterial activity. MethodsAccording to solubility and emulsification studies, castor oil, Cremophor EL, and Transcutol HP were selected as system excipients. A pseudo ternary phase diagram was constructed to reveal the self-emulsification area. The developed SNEDDS were visually assessed, and the droplet size was measured. In vitro release studies and stability studies were conducted. The antimicrobial effectiveness against multiple bacterial strains, including Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), and different accessory gene regulator (Agr) variants were investigated for the optimum ITN-loaded SNEDDS formulation. ResultsCharacterization studies showed emulsion homogeneity and stability (%T 95.40–99.20, A graded) with low droplet sizes (31.87 ± 1.23 nm–115.47 ± 0.36 nm). It was found that the developed ITN-SNEDDS provided significantly a higher release rate (>96 % in 1 h) as compared to the raw drug (<10 % in 1 h). The in vitro antimicrobial activities of pure ITN and ITN-loaded SNEDDS demonstrated a remarkable inhibitory effect on bacterial growth with statistically significant findings (p < 0.0001) for all tested strains when treated with ITN-SNEDDS as compared to the raw drug. ConclusionThese outcomes suggested that SNEDDS could be a potential approach for improving solubility, dissolution rates, and antibacterial activity of ITN.

Throat spray formulated with virucidal pharmaceutical excipients as an effective early prophylactic or treatment strategy against pharyngitis post-exposure to SARS-CoV-2

Our study aimed to develop a virucidal throat spray using bioactive compounds and excipients, focusing on the preparation of Curcumin (CUR) in a self-nano emulsifying drug delivery system (SNEDDS). Two molecular docking studies against SARS-CoV-2 targets guided the selection of proper oil, surfactant, co-surfactant, and natural bioactive that would maximize the antiviral activity of the throat spray. Two self-nanoemulsifying formulas that were diluted with different vehicles to prepare eight CUR-loaded SNESNS (self-nanoemulsifying self-nanosuspension) formulas. In vitro characterization studies and in vitro anti-SARS-CoV-2 effect revealed that the optimal formula, consisted of 20 % Anise oil, 70 % Tween 80, 10 % PEG 400, and 0.1 %w/w CUR, diluted with DEAE-Dx. Preclinical toxicity tests on male rats confirmed the safety of a mild throat spray dose (5 µg/mL CUR). In a rat model of acute pharyngitis induced by ammonia, post-treatment with the optimal formula of CUR loaded SNESNS for one week significantly reduced elevated proinflammatory markers (TNF-α, IL6, MCP1, and IL8). In conclusion, our CUR-loaded SNESNS formula, at 5 µg/mL concentration, shows promising effect as a prophylactic throat spray against SARS-CoV-2 and as a treatment for pharyngitis.

A Robust and Reliable UPLC Method for the Simultaneous Quantification of Rosuvastatin Calcium, Glibenclamide, and Candesartan Cilexetil

Metabolic syndrome is an associated condition that occurs together and increases the risk of heart disease and diabetes. These conditions include high blood pressure, high blood sugar, and high body mass index (BMI) in terms of cholesterol and triglyceride levels. Most of the elderly population may administer three drugs to control the above conditions. Therefore, this study aims to develop an analytical assay for the precise analysis of three components and to formulate a Self-Nanoemulsifying Drug-Delivery System (SNEDDS) loaded with three drugs: Rosuvastatin Calcium (RC; antilipidemic), Glibenclamide (GB; antidiabetic), and Candesartan Cilexetil (CC; antihypertensive). A design of the experiment was developed at a level of 32, and the influence of column temperature and flow rate was studied in terms of retention time, peak area, peak asymmetry, and resolution. The assay was subjected to several studies to ensure its validation. Under the optimized conditions—column temperature at 50 °C and flow rate at 0.25 mL/min—the three drugs, RC, GB, and CC, are separated. Their retention times are 0.840, 1.800, and 5.803 min, respectively. The assay was valid in terms of linearity, accuracy, and precision. Moreover, the developed assay shows a good tolerance against any change in the condition. The assay was tested also to separate the drugs in a pharmaceutical formulation as SNEDDs. The assay successfully separates the drug with a good resolution.

Enhancing the Antiproliferative Activity of Perillyl Alcohol against Glioblastoma Cell Lines through Synergistic Formulation with Natural Oils.

Due to its volatility, photostability, and gastrointestinal toxicity, Perillyl Alcohol (POH), a monoterpenoid component of various plant species, is a chemotherapeutic drug with insufficient efficacy. Many naturally occurring bioactive compounds have well-known antiproliferative properties, including sefsol, jojoba, tea tree, and moringa oils. This study sought to develop an oil-based Self Nanoemulsifying Drug Delivery System (SNEDDS) using tween 80 as the surfactant and Dimethyl Sulfoxide (DMSO) or Polyethylene Glycol (PEG) 400 as the cosurfactant; the oils were used in a range of 10-20% to boost POH's anticancer efficacy. The formulations' size, charge, and impact on the viability of glioma cell lines, ANGM-CSS and A172, were evaluated. The developed SNEDDS formulations ranged from 3 nm to 362 nm in size, with electronegative surface charges between 5.05 and 17.0 mV and polydispersity indices between 0.3 and 1.0. The findings indicated that the antiproliferative effect of POH-loaded Nanoemulsion (NE) could be used as a possible anticancer therapy for glioblastoma in vitro, particularly when paired with the tested natural oils. Before asserting that this delivery technique is appropriate for glioblastoma therapy, additional in vitro and in vivo investigations are required.

The potential of a self-nano emulsifying drug delivery system for ethanol extract of red betel vine as an antibacterial agent against Mycobacterium tuberculosis and Pseudomonas aeruginosa

The potential of a self-nano emulsifying drug delivery system for ethanol extract of red betel vine as an antibacterial agent against Mycobacterium tuberculosis and Pseudomonas aeruginosa

Fine-tuning the activation behaviors of ternary modular cabazitaxel prodrugs for efficient and on-target oral anti-cancer therapy

The disulfide bond plays a crucial role in the design of anti-tumor prodrugs due to its exceptional tumor-specific redox responsiveness. However, premature breaking of disulfide bonds is triggered by small amounts of reducing substances (e.g., ascorbic acid, glutathione, uric acid and tea polyphenols) in the systemic circulation. This may lead to toxicity, particularly in oral prodrugs that require more frequent and high-dose treatments. Fine-tuning the activation kinetics of these prodrugs is a promising prospect for more efficient on-target cancer therapies. In this study, disulfide, steric disulfide, and ester bonds were used to bridge cabazitaxel (CTX) to an intestinal lymph vessel-directed triglyceride (TG) module. Then, synthetic prodrugs were efficiently incorporated into self-nanoemulsifying drug delivery system (corn oil and Maisine CC were used as the oil phase and Cremophor EL as the surfactant). All three prodrugs had excellent gastric stability and intestinal permeability. The oral bioavailability of the disulfide bond-based prodrugs (CTX-(C)S-(C)S-TG and CTX-S-S-TG) was 11.5- and 19.1-fold higher than that of the CTX solution, respectively, demonstrating good oral delivery efficiency. However, the excessive reduction sensitivity of the disulfide bond resulted in lower plasma stability and safety of CTX-S-S-TG than that of CTX-(C)S-(C)S-TG. Moreover, introducing steric hindrance into disulfide bonds could also modulate drug release and cytotoxicity, significantly improving the anti-tumor activity even compared to that of intravenous CTX solution at half dosage while minimizing off-target adverse effects. Our findings provide insights into the design and fine-tuning of different disulfide bond-based linkers, which may help identify oral prodrugs with more potent therapeutic efficacy and safety for cancer therapy.

Beneficial Effects of Self-nanoemulsifying Drug Delivery System Extract of Curcuma longa on Polycystic Ovary Syndrome Rats Model Through Insulin Sensitization Activity

Beneficial Effects of Self-nanoemulsifying Drug Delivery System Extract of Curcuma longa on Polycystic Ovary Syndrome Rats Model Through Insulin Sensitization Activity

Nutraceutically-enhanced oral delivery of vitamin D3 via Bio-SNEDDS: Demonstrating in vivo superiority over pediatric formulations

BackgroundVitamin D3 (VD3) deficiency among children in Saudi Arabia remains a pressing concern due to its poor bioavailability and the limitations of current pediatric formulations. To address this challenge, we developed a groundbreaking pediatric self-nanoemulsifying drug delivery system (Bio-SNEDDS) for VD3, fortified with black seed oil and moringa seed oil for dual therapeutic benefits. Through meticulous formulation optimization using ternary phase diagrams and comprehensive testing, our Bio-SNEDDS demonstrated exceptional performance. MethodsBio-SNEDDS were manufactured by incorporating Black seed oil and moringa seed oil as bioactive nutraceutical excipients along with various cosurfactant and surfactants. Bio-SNEDDS were systematically optimized through ternary phase diagrams, visual tests, droplet size analysis, drug solubilization studies, dispersion assessments, and pharmacokinetic testing in rats compared to Vi-De 3®. ResultsPseudoternary phase diagrams identified oil blends producing large nanoemulsion regions optimal for SNEDDS formation. The optimized F1 Bio-SNEDDS showed a mean droplet diameter of 33.7 nm, solubilized 154.46 mg/g VD3 with no metabolite formation, and maintained >88% VD3 in solution during 24 h dispersion testing. Notably, in vivo pharmacokinetic evaluation at a high VD3 dose demonstrated an approximately two-fold greater relative bioavailability over Vi-De 3®, validating the superb oral delivery performance of Bio-SNEDDS even under challenging high-dose conditions. ConclusionsThe Bio-SNEDDS provides an effective VD3 delivery strategy with established in vivo superiority over marketed products, along with offering additional health benefits from the natural oils.

The Impact of Polymers on Enzalutamide Solid Self-Nanoemulsifying Drug Delivery System and Improved Bioavailability.

Enzalutamide (ENZ), marketed under the brand name Xtandi® as a soft capsule, is an androgen receptor signaling inhibitor drug actively used in clinical settings for treating prostate cancer. However, ENZ's low solubility and bioavailability significantly hinder the achievement of optimal therapeutic outcomes. In previous studies, a liquid self-nanoemulsifying drug delivery system (L-SNEDDS) containing ENZ was developed among various solubilization technologies. However, powder formulations that included colloidal silica rapidly formed crystal nuclei in aqueous solutions, leading to a significant decrease in dissolution. Consequently, this study evaluated the efficacy of adding a polymer as a recrystallization inhibitor to a solid SNEDDS (S-SNEDDS) to maintain the drug in a stable, amorphous state in aqueous environments. Polymers were selected based on solubility tests, and the S-SNEDDS formulation was successfully produced via spray drying. The optimized S-SNEDDS formulation demonstrated through X-ray diffraction and differential scanning calorimetry data that it significantly reduced drug crystallinity and enhanced its dissolution rate in simulated gastric and intestinal fluid conditions. In an in vivo study, the bioavailability of orally administered formulations was increased compared to the free drug. Our results highlight the effectiveness of solid-SNEDDS formulations in enhancing the bioavailability of ENZ and outline the potential translational directions for oral drug development.

Solubility Enhancement of Palbociclib Supersaturable Self-Nano Emulsifying Drug Delivery System by Central Composite Design

Solubility Enhancement of Palbociclib Supersaturable Self-Nano Emulsifying Drug Delivery System by Central Composite Design

Polysaccharide-fecal microbiota-based colon-targeted self-nanoemulsifying drug delivery system of curcumin for treating polycystic ovarian syndrome.

The gut microbiome is involved in the pathogenesis of many diseases including polycystic ovarian syndrome (PCOS). Modulating the gut microbiome can lead to eubiosis and treatment of various metabolic conditions. However, there is no proper study assessing the delivery of microbial technology for the treatment of such conditions. The present study involves the development of guar gum-pectin-based solid self-nanoemulsifying drug delivery system (S-SNEDDS) containing curcumin (CCM) and fecal microbiota extract (FME) for the treatment of PCOS. The optimized S-SNEDDS containing FME and CCM was prepared by dissolving CCM (25mg) in an isotropic mixture consisting of Labrafil M 1944 CS, Transcutol P, and Tween-80 and solidified using lactose monohydrate, aerosil-200, guar gum, and pectin (colon-targeted CCM solid self-nanoemulsifying drug delivery system [CCM-CT-S-SNEDDS]). Pharmacokinetic and pharmacodynamic evaluation was carried out on letrozole-induced female Wistar rats. The results of pharmacokinetic studies indicated about 13.11 and 23.48-fold increase in AUC of CCM-loaded colon-targeted S-SNEDDS without FME (CCM-CT-S-SNEDDS (WFME)) and CCM-loaded colon-targeted S-SNEDDS with FME [(CCM-CT-S-SNEDDS (FME)) as compared to unprocessed CCM. The pharmacodynamic study indicated excellent recovery/reversal in the rats treated with CCM-CT-S-SNEDDS low and high dose containing FME (group 13 and group 14) in a dose-dependent manner. The developed formulation showcasing its improved bioavailability, targeted action, and therapeutic activity in ameliorating PCOS can be utilized as an adjuvant therapy for developing a dosage form, scale-up, and technology transfer.

MODIFYING FRACTION EXTRACTED FROM SESEWANUA (CLERODENDRUM FRAGRANS WILD) LEAVES IN SNEDDS PREPARATIONS: CHARACTERIZATION AND BIOAVAILABILITY TEST

Objective: This study aimed to determine the effect of compound modification using acyl chloride derivatives on n-hexane: ethyl acetate fraction of sesewanua leaves, focusing on the characteristics and pharmacokinetics profile in Self-Nano-emulsifying Drug Delivery System (SNEDDS) preparations. Methods: A quasi-experimental method was used with six SNEDDS formulas, namely F0 (without active substance), F1 (acetyl chloride fraction), F2 (propanoyl chloride fraction), F3 (butyryl chloride fraction), and F4 (pentanoyl chloride fraction) and F5 (piperine compound). The fractions were subjected to characterization tests, including particle size, polydispersity index, and zeta potential as well as determination of pharmacokinetics profile using the modified crane and Wilson method. Results: The results showed that the characterization tests of particle size using Particle Size Analyzer (PSA) for F0-F5 on gastric fluid included 15.8, 17,367, 20,367, 15.8, 28.233, and 21.533 nm. The polydispersity index values were 0.211, 0.438, 0.311, 0.383, 0.394, and 0.397, while the Zeta Potential values were-22,267,-22.2,-23.5,-24,033,-22,967, and-21.6 mV, respectively. The pharmacokinetics profile of AUC0-∞ was as follows: F0 0 μg, F1 492.83, F2 492.83, F3 245.98, F4 492.94, and F5 843.38 μg. Fraction five (F5) as a control had a higher AUC0-∞ value than compared to the fractions modified with acyl chloride derivatives. The T1/2 elimination values were F0 0 h, F1 22.5 h, F2 10.811 h, F3 35.54 h, F4 231.01 h, and F5 15.469 h. Conclusion: Based on the results, the addition of acetyl, propanoyl, butyryl, and penthanoyl chloride affected Particle Size Characterization Analysis and pharmacokinetics profile of SNEDDS preparation of n-hexane: ethyl acetate fraction. Structural modification showed the ability to alter the bioavailability of the active ingredient according to the desired therapeutic goal.

THE DEVELOPMENT AND VALIDATION OF ANALYTICAL METHOD FOR EVALUATING GALLIC ACID IN ETHYL ACETATE FRACTION (EAF) OF SNEDDS FORMULATION: QUANTITATIVE ANALYSIS WITH IN VITRO ASSAY

Objective: This study aimed to develop a simple, accurate, precise, sensitive, robust, and stable analytical method for the evaluation of gallic acid in Self-Nanoemulsifying Drug Delivery System (SNEDDS) incorporating ethyl acetate fraction (EAF) of Melastoma malabathricum leaves in combination with Gentamicin. Methods: Validation process followed ICH guidelines and applied a reverse phase HPLC method with a mobile phase of acetonitrile-phosphoric buffer at pH 3.03 (20:80 v/v). The stationary phase consisted of a VP-ODS shim-pack C-18 column (250x4.6 mm) with a flow rate of 0.2 ml/min and detection at 263 nm using an Ultraviolet detector. Additionally, antioxidant activity was assessed through the DPPH and FRAP methods, and SPF value was determined with a UV/Vis spectrophotometer in the 290-390 nm wavelength range. Results: The results showed that the retention time of quercetin was 16.648 min with a tailing factor of 1.623. The regression equation (y=224689x-989000) had a concentration range of 10-55 µg/ml and a correlation value of 0.9920. Limit of Detection (LOD) and Limit of Quantification (LOQ) were found to be 2.394±0.086 and 7.254±0.260 µg/ml, respectively. Method accuracy, determined by recovery values at concentrations of 50%, 100%, and 150%, ranged from 91.18% to 109.49%. Repeatability inter-day variations were expressed as %RSD values of 1.027-1.963% for AUC and 0.150-0.145 for RT. Moreover, the applied method showed stability within a temperature range of 14 °C–35 °C. Analysis showed gallic acid content of 1.773±0.049 mg/g in SNEDDS EAF formulation. Antioxidant activity measured through the DPPH and FRAP methods yielded IC50 values of 4.167±0.552 µg/ml and 20.253±0.619 µg/ml, respectively, while SPF value at SNEDDS concentration of 150 µg/ml was 36.993±0.183. Conclusion: This study successfully developed a precise, accurate, specific, and stable method for quantifying gallic acid levels in SNEDDS EAF of Melastoma malabathricum leaves in combination with Gentamicin. Therefore, SNEDDS EAF formulation exhibited an effective wound-healing potential, supported by a robust quality control process.