Selective Dehydrogenation Research Articles

Performance Descriptor of Subsurface Metal-Promoted Boron Catalysts for Low-Temperature Propane Oxidative Dehydrogenation to Propylene.

Boron-based catalysts have exhibited excellent olefin selectivity in the oxidative dehydrogenation of propane (ODHP) reaction. The substrate material should be a potential platform for performance modulation of boron catalysts in this reaction since the introduction of subsurface Ni promoters significantly improves the activity. In this study, we deciphered the substrate effect and identified a performance descriptor to comprehend the roles of subsurface materials in BOx/metal/BN ODHP catalysts by evaluating different metal promoters. Performance evaluation and transient infrared spectroscopic experiments demonstrate that the intrinsic activity and kinetic behaviors of the O-H bond dissociation/regeneration on the metal-promoted BOx overlayer are metal substrate-dependent. Combining density functional theory (DFT) calculations, it is found that the dissociation/regeneration inclination of the O-H bond in BOx(OH)3-x active species is controlled by the affinity of H for boron oxide species. The metal-O binding energy, which has been demonstrated to be linearly correlated with H affinity, can serve as a straightforward performance descriptor for both low-temperature radical initialization and ODHP reaction, revealing this reaction is controlled by the Sabatier principle, and moderate metal-O binding energy is essential for achieving remarkable performance in the BOx/M/BN catalysts. Following the guidance of a potential descriptor, Ni-Rh alloy substrates are investigated and the substrate with a Ni/Rh molar ratio of 15:1 significantly enhances the low-temperature intrinsic activity of the metal-modified BOx to 9.26 μmol/(m2·s), which reaches 105.9 times that of h-BN and is 18.3% larger than the monometallic BOx/Ni/BN catalysts.

Highly Selective On-Surface Dehydrogenative Aromatization of n-Hexyl to Phenyl Substituents.

Dehydrogenative aromatization of alkyl substituents represents a powerful approach to aryl-substituted functional molecules. However, the inertness of alkyl groups and the need for harsh reaction conditions accompanied by low product selectivity hamper its widespread applications. Here, we demonstrate the highly selective on-surface thermal aromatization of n-hexyl substituents on polycyclic aromatic hydrocarbons (PAHs) to their phenyl-substituted analogues under mild conditions. After depositing two representative precursor molecules, n-hexyl-substituted hexaphenylbenzene (HPB-Hex) and bianthryl octacarboxylic tetraimide (BATI-Hex), onto a pre-heated Au(111) substrate, dehydroaromatization of the peripheral n-hexyl groups into phenyl rings occurs, following the planarization of hexaphenylbenzene and bianthryl core. This process involves sequential intramolecular C-C bond rotations, dehydrogenation, and cyclodehydrogenation reactions, yielding phenyl-substituted hexabenzocoronene (HBC-Ph) and bisanthene octacarboxylic tetraimides (BSTI-Ph). The reaction sequences were monitored using scanning tunneling microscopy (STM) and bond-resolved non-contact atomic force microscopy (nc-AFM), offering structural proof of both intermediates and final products. These experimental techniques were complemented by density functional theory (DFT) simulations, which facilitated the detection of crucial steps in the conversion of n-hexyl to phenyl groups. Moreover, the effect of alkyl aromatization on the electronic properties of the newly formed aromatic hydrocarbons was elucidated using scanning tunneling spectroscopy (STS).

Room-temperature selective cyclodehydrogenation on Au(111) via radical addition of open-shell resonance structures

Cyclodehydrogenation is an important ring-formation reaction that can directly produce planar-conjugated carbon-based nanomaterials from nonplanar molecules. However, inherently high C–H bond energy necessitates a high temperature during dehydrogenation, and the ubiquity of C − H bonds in molecules and small differences in their bond energies hinder the selectivity of dehydrogenation. Here, we report a room-temperature cyclodehydrogenation reaction on Au(111) via radical addition of open-shell resonance structures and demonstrate that radical addition significantly decreases cyclodehydrogenation temperature and further improves the chemoselectivity of dehydrogenation. Using scanning tunneling microscopy and non-contact atomic force microscopy, we visualize the cascade reaction process involved in cyclodehydrogenation and determine atomic structures and molecular orbitals of the planar acetylene-linked oxa-nanographene products. The nonplanar intermediates observed during progression annealing, combined with density functional theory calculations, suggest that room-temperature cyclodehydrogenation involves the formation of transient radicals, intramolecular radical addition, and hydrogen elimination; and that the high chemoselectivity of cyclodehydrogenation arises from the reversibility and different thermodynamics of radical addition step.

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes.

Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post-synthetic incorporation of In to Pt@K-MFI. The optimized PtIn@K-MFI catalyst outcompetes state-of-the-art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions.

Production of CO-free H2 through aqueous formic acid dehydrogenation over the α-Mo2C/NC catalyst

Formic acid (FA) is considered a convenient hydrogen carrier with a high hydrogen-storage capacity. Although the non-noble-metal-based catalysts for FA dehydrogenation have made significant progress in recent years, they still face some challenges, such as complex preparation methods and inefficient FA dehydrogenation. Herein, a N-doped carbon (NC) supported α-Mo2C catalyst was successfully synthesized by the one-step pyrolysis strategy and performed excellent catalytic activity for neat FA decomposition while with a low dehydrogenation selectivity. The addition of water significantly improved the FA dehydrogenation selectivity and the α-Mo2C/NC catalyst showed a gas production rate of 224.19 mL/gcat./h and an almost complete dehydrogenation selectivity in the aqueous FA (40 vol.%) at 98 °C. Moreover, no significant deactivation was found during the 60 h stability test under different FA concentrations via this catalyst. The use of NC supported α-Mo2C obtained by one-step pyrolysis as an effective non-noble-metal catalyst and H2O introduction to promote selectivity could provide a novel low-cost­ H2 production strategy from FA.

Atomically Precise Control of Topological State Hybridization in Conjugated Polymers.

Realization of topological quantum states in carbon nanostructures has recently emerged as a promising platform for hosting highly coherent and controllable quantum dot spin qubits. However, their adjustable manipulation remains elusive. Here, we report the atomically accurate control of the hybridization level of topologically protected quantum edge states emerging from topological interfaces in bottom-up-fabricated π-conjugated polymers. Our investigation employed a combination of low-temperature scanning tunneling microscopy and spectroscopy, along with high-resolution atomic force microscopy, to effectively modify the hybridization level of neighboring edge states by the selective dehydrogenation reaction of molecular units in a pentacene-based polymer and demonstrate their reversible character. Density functional theory, tight binding, and complete active space calculations for the Hubbard model were employed to support our findings, revealing that the extent of orbital overlap between the topological edge states can be finely tuned based on the geometry and electronic bandgap of the interconnecting region. These results demonstrate the utility of topological edge states as components for designing complex quantum arrangements for advanced electronic devices.

Ultrafine Pd nanoparticles confined in naphthalene-based covalent triazine frameworks for efficient and stable hydrogen production from formic acid

Formic acid (FA) is considered as a kind of promising hydrogen storage materials due to its economic feasibility, safety, stability and high hydrogen density. Nevertheless, it is a challenge to design a high-performance catalyst with high activity, selectivity and stability for the dehydrogenation of FA to generate hydrogen (H2). Herein, a range of covalent triazine frameworks (CTFs including 1,8-CTF, 1,5-CTF and 2,3-CTF) with abundant nitrogen atoms are developed to support palladium nanoparticles for efficiently catalyzing FA dehydrogenation. Ultrasmall palladium nanoparticles with a size of 1.2 ± 0.3 nm showed near 100 % H2 selectivity and high catalytic activity in FA dehydrogenation supported by 1,8-CTF. The activation energy of FA dehydrogenation catalyzed by Pd/1,8-CTF reaches 26.17 kJ·mol−1. In addition, Pd/1,8-CTF exhibits high stability and easy recyclability, and the catalytic activity is maintained even after 6 cycles. This work gives a feasible strategy to develop high-efficiency and selective nanocatalysts for H2 production from FA dehydrogenation.

Enhancement of ethylene selectivity in chemical looping oxidative dehydrogenation of ethane using manganese-based redox catalysts supported on HY zeolite

As the crucial role of zeolite catalysts becomes increasingly prominent in refining and petrochemical industries, this study introduces a novel application of xMn / HY catalysts in ethane catalytic dehydrogenation via Chemical Looping Oxidative Dehydrogenation (CL-ODH). The synergistic effect of manganese oxides on the HY framework and a moderate amount of acidic sites within the catalyst facilitates the cleavage of C-H bonds and the desorption of olefins, which are vital for advancing ethane CL-ODH. We identified the reasons for maintaining high ethylene selectivity using advanced characterization techniques such as XRD, SEM, TEM, BET, H2-TPR, NH3-TPD, and Py-IR. Notably, under optimized conditions at 700 °C with a gas time-space velocity (GHSV) of 1800 mL·h−1·g−1, the 3Mn/HY catalyst achieved approximately 97.1 % selectivity for ethylene and a 22.7 % conversion of ethane. These findings present a scalable route for ethylene production, showcasing significant industrial relevance by potentially reducing energy costs and improving yield.

Chemically bonded nonmetallic LSPR S-scheme hollow heterostructure for boosting photocatalytic performance

The light absorption, mass transfer, and charges separation are essential to the efficiency of photocatalytic reaction, but constructing photocatalyst with the three excellent properties is still challenging. Herein, the interfacial Mo-S bonds and oxygen vacancy synchronously decorated MoO3-x/Zn3In2S6 (MoO3-x/ZIS) heterostructure was rationally designed and synthesized. The oxygen-defective MoO3-x nanotubes showed hollow structure and local surface plasmonic resonance (LSPR) effect, which improved mass transfer and solar light absorption. Besides, the built-in electric field and interfacial Mo-S bond provided endogenetic impetus and channels for rapid photoexcited charge carriers transfer and separation. The photocatalytic hydrogen (H2) evolution and hydrogen peroxide (H2O2) production on optimal MoO3-x/ZIS composite were 17.34 and 4.47 mmol g−1 h−1, respectively. The apparent quantum efficiency of MoO3-x/ZIS for H2 evolution at 400 nm was about 13.92 %, which was 8.09 times higher than that of ZIS. Moreover, the MoO3-x/ZIS also displayed excellent activities on the selective 5-hydroxymethylfurfural dehydrogenation. The in-situ X-ray photoelectron spectroscopy, electron paramagnetic resonance, in-situ selective photodeposition, and density functional theory calculation confirmed the S-scheme charge transfer pathway between MoO3-x and ZIS. This study provides an effective avenue for designing multifunctional photocatalysts based on the synergistic effects of chemically bonded S-scheme heterostructure and nonmetallic LSPR effect.

Highly selective interconversion of quinoxaline and 1,2,3,4-tetrahydroquinoxaline over a spinel CuCo2O4 electrocatalyst supported by Ni foam

An efficient electrocatalytic hydrogen storage system using CuCo2O4 supported by Ni foam (CuCo2O4/NF) as a bifunctional electrocatalyst and quinoxaline as a hydrogen storage carrier was developed. Electrochemical tests were conducted at room temperature and atmospheric pressure. The results showed that the conversion and selectivity of hydrogenation reached 93 % and 99 %, respectively, within 3 h at −0.18 V (vs. RHE). Meanwhile, the conversion and selectivity of dehydrogenation both reached 100 % within 20 min at 1.30 V (vs. RHE). Moreover, due to the excellent durability of CuCo2O4/NF, the hydrogenation conversion remained as high as 89 % after 8 cycles.

High Selective Electrocatalysis Dehydrogenation of Isopropanol to Acetone with Cobenefits: Carboxylic Acids Coproduction

High Selective Electrocatalysis Dehydrogenation of Isopropanol to Acetone with Cobenefits: Carboxylic Acids Coproduction

Selective dehydrogenation of tetrahydroisoquinolines in the presence of sulfoxides

Selective dehydrogenation of tetrahydroisoquinolines in the presence of sulfoxides

Microenvironment engineering of non-noble metal alloy for selective propane dehydrogenation

Microenvironment engineering of non-noble metal alloy for selective propane dehydrogenation

Synthesis of non-canonical amino acids through dehydrogenative tailoring.

Amino acids are essential building blocks in biology and chemistry. Whereas nature relies on a small number of amino acid structures, chemists desire access to a vast range of structurally diverse analogues1-3. The selective modification of amino acid side-chain residues represents an efficient strategy to access non-canonical derivatives of value in chemistry and biology. While semisynthetic methods leveraging the functional groups found in polar and aromatic amino acids have been extensively explored, highly selective and general approaches to transform unactivated C-H bonds in aliphatic amino acids remain less developed4,5. Here we disclose a stepwise dehydrogenative method to convert aliphatic amino acids into structurally diverse analogues. The key to the success of this approach lies in the development of a selective catalytic acceptorless dehydrogenation method driven by photochemical irradiation, which provides access to terminal alkene intermediates for downstream functionalization. Overall, this strategy enables the rapid synthesis of new amino acid building blocks and suggests possibilities for the late-stage modification of more complex oligopeptides.

Discovery of promising Cu-based catalysts for selective propane dehydrogenation to propylene assisted by high-throughput computations

The development of efficient catalysts with high selectivity is a major challenge for propane dehydrogenation (PDH), which is an on-purpose route to produce propylene. We have developed a high-throughput computational strategy to screen out the promising catalysts for propane dehydrogenation to propylene on Cu-based metal alloys. A total of 1500 candidates of Cu3M1 alloys are constructed, and four efficient descriptors are applied in our high-throughput screening to evaluate the activity and selectivity of catalysts. Four Cu-based alloys of Cu3Cr1, Cu3Pd1, Cu3Pt1, and Cu3Ag1 are identified as promising PDH catalysts, and their superior selectivity towards propylene could be explained by the synergistic effect of Cu and M atoms. Our theoretical screening method could assist the new catalyst design and accelerate the discovery of environment-friendly alloy catalysts for PDH.

Facile synthesis of highly basic, nanocrystalline Fe2O3-NiO composites as promising and durable catalysts for selective dehydrogenation of 2-butanol.

Nanocrystalline Fe2O3-NiO composite catalysts were prepared using a sonication-assisted green preparation method. The prepared catalysts were characterized using different techniques, including thermal analyses (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, surface area measurements (SBET), and scanning electron microscopy (SEM). The surface basicity of the prepared catalysts was measured using the temperature-programmed desorption of CO2 (CO2-TPD) as a highly acidic probe molecule. The catalytic activity of all the prepared catalysts was tested at a temperature range of 250-325 °C towards the dehydrogenation of 2-butanol to methyl-ethyl ketone (MEK), which is considered a promising fossil fuel alternative and has several industrial applications. The composite catalysts showed better catalytic activity compared to the pure oxides (i.e., Fe2O3 and NiO) due to the strong synergetic effect between the two oxides. Fe2O3 prevented the coke formation over the surface of NiO by the oxygen-scavenging effect of Fe, which promotes the oxidation of the carbonaceous species and increases the catalyst's resistance to deactivation. The effect of weight hourly space velocity (WHSV) on the catalytic activity was tested over a selected catalyst. In addition, the stability and durability of the catalyst were tested across four successive reaction cycles, demonstrating remarkable performance throughout all the reaction cycles.

One‐Pot Catalytic Cascade for the Depolymerization of the Lignin β‐O‐4 Motif to Non‐phenolic Dealkylated Aromatics

Aromatic monomers obtained by selective depolymerization of the lignin β‐O‐4 motif are typically phenolic and contain (oxygenated) alkyl substitutions. This work reveals the potential of a one‐pot catalytic lignin β‐O‐4 depolymerization cascade strategy that yields a uniform set of methoxylated aromatics without alkyl side‐chains. This cascade consists of selective acceptorless dehydrogenation of the γ‐hydroxy group, subsequent retro‐aldol reaction cleaving the Cα–Cβ bond followed by in situ acceptorless decarbonylation of the formed aldehydes. This three‐step cascade reaction, catalyzed by an iridium(I)‐BINAP complex, resulted in 75% 1,2‐dimethoxybenzene from G‐type lignin dimers alongside syngas (CO:H2 ≈ 1.4:1). Applying this method to a synthetic G‐type polymer, 11 wt% 1,2‐dimethoxybenzene was obtained. This versatile compound can be easily transformed into 3,4‐dimethoxyphenol, a valuable precursor for pharmaceutical synthesis, through enzymatic catalytic approach. Moreover, the hydrodeoxygenation potential of 1,2‐dimethoxybenzene offers a pathway to produce valuable cyclohexane or benzene derivatives, presenting enticing opportunities for sustainable chemical transformations without the necessity for phenolic mixture upgrading via dealkylation.

One-Pot Catalytic Cascade for the Depolymerization of the Lignin β-O-4 Motif to Non-phenolic Dealkylated Aromatics.

Aromatic monomers obtained by selective depolymerization of the lignin β-O-4 motif are typically phenolic and contain (oxygenated) alkyl substitutions. This work reveals the potential of a one-pot catalytic lignin β-O-4 depolymerization cascade strategy that yields a uniform set of methoxylated aromatics without alkyl side-chains. This cascade consists of the selective acceptorless dehydrogenation of the γ-hydroxy group, a subsequent retro-aldol reaction that cleaves the Cα-Cβ bond, followed by in situ acceptorless decarbonylation of the formed aldehydes. This three-step cascade reaction, catalyzed by an iridium(I)-BINAP complex, resulted in 75 % selectivity for 1,2-dimethoxybenzene from G-type lignin dimers, alongside syngas (CO : H2≈1.4 : 1). Applying this method to a synthetic G-type polymer, 11 wt % 1,2-dimethoxybenzene was obtained. This versatile compound can be easily transformed into 3,4-dimethoxyphenol, a valuable precursor for pharmaceutical synthesis, through an enzymatic catalytic approach. Moreover, the hydrodeoxygenation potential of 1,2-dimethoxybenzene offers a pathway to produce valuable cyclohexane or benzene derivatives, presenting enticing opportunities for sustainable chemical transformations without the necessity for phenolic mixture upgrading via dealkylation.

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

AbstractDeveloping a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au−Vo−Zr3+ on Au1/ZrO2 exhibits the highest H2 production rate, with above 37,964 mol H2 per mol Au per hour (385 g H2 h−1) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au1/CeO2, Au1/TiO2, and Au1/Al2O3, respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost‐effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic‐level catalyst design by colocalizing catalytically active metal atoms forming a structure‐sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation.

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the "complex active site" consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The "complex active site" Au-Vo-Zr3+ on Au1/ZrO2 exhibits the highest H2 production rate, with above 37,964 mol H2 per mol Au per hour (385 g H2 h-1) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au1/CeO2, Au1/TiO2, and Au1/Al2O3, respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive "complex site", is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.