Selective Recognition Research Articles

Anthraquinone-based Schiff base fluorescent probe for the sequential sensing of Al3+ and pyrophosphate in a near-perfect aqueous solution and bioimaging

A new anthraquinone derivative fluorescent probe (DPHA) was designed and synthesized for sequentially detecting aluminum ions and pyrophosphate (PPi) in a near-perfect aqueous medium with 0.4 % DMSO as a co-solvent. The DPHA probe displayed “turn-on” fluorescence sensing of Al3+ at 575 nm, overcoming the interference of the other common cations through an apparent color variation from purple to light pink. Anthraquinone-derived conjugated skeleton and Schiff base-mediated multiple binding sites were responsible for the sensitive fluorescence response and selective recognition, respectively, thus producing a chelation-enhanced fluorescence effect. Furthermore, Job's plot analysis and high-resolution mass spectrometry (HRMS) studies supported the formation of a 1:1 ligand/metal complex for Al3+. The plausible binding mechanism was recognized by both experimentally and theoretically. The succeeding addition of PPi regenerated the original spectrum of DPHA and thus the strong affinity of Al3+ to PPi. The in-situ formed DPHA-Al3+ complex for selective identification of PPi by electrostatic interaction by drawing out Al3+ and releasing the DPHA probe. Except for specific recognition of Al3+ and PPi with corresponding low detection limits of 42.2 nM and 65.2 nM (S/N = 3). Owing to its good biocompatibility, DPHA also applied as a visual probe for monitoring Al3+ ions and PPi in living cells and zebrafish, demonstrating its outstanding potential in biological work.

Fabrication of a ratiometric fluorescence nanoprobe for detecting tryptophan enantiomers

A novel ratiometric fluorescence nanoprobe was developed to detect tryptophan enantiomers with high selectivity and sensitivity. Fluorescein (FL) was doped into SiO2 nanoparticles with little dye leakage, acting as an internal reference signal. The chiral center of L-histidine (L-His) was introduced by partially replacing the carboxyl on the surface of SiO2. The response signal of Eu3+ was coordinated with carboxyl to obtain the FL@SiO2-Eu/His nanoprobe. The nanoprobe shows enantioselective luminescence responses for tryptophan enantiomers. The red emission of Eu3+ can be effectively quenched by the tryptophan enantiomers, but the quenching efficiency is different due to the different interactions with the chiral recognition sites. The fluorescence intensity ratio (I613/I515) shows excellent linearity with tryptophan enantiomers in the range of 0–100 μM (R2 > 0.99). The limit of detection (LOD) is 1.0 μM and 1.3 μM for L-tryptophan (L-Trp) and D-tryptophan (D-Trp), respectively. The FL@SiO2-Eu/His nanoprobe shows good selectivity and specific recognition in serum actual samples. In addition, the nanoprobe can realize visual detection under UV light due to the obvious color change. This work provides an innovative idea for the development of new probes in the detection field.

Shining a spotlight on m6A and the vital role of RNA modification in endometrial cancer: a review.

RNA modifications are mostly dynamically reversible post-transcriptional modifications, of which m6A is the most prevalent in eukaryotic mRNAs. A growing number of studies indicate that RNA modification can finely tune gene expression and modulate RNA metabolic homeostasis, which in turn affects the self-renewal, proliferation, apoptosis, migration, and invasion of tumor cells. Endometrial carcinoma (EC) is the most common gynecologic tumor in developed countries. Although it can be diagnosed early in the onset and have a preferable prognosis, some cases might develop and become metastatic or recurrent, with a worse prognosis. Fortunately, immunotherapy and targeted therapy are promising methods of treating endometrial cancer patients. Gene modifications may also contribute to these treatments, as is especially the case with recent developments of new targeted therapeutic genes and diagnostic biomarkers for EC, even though current findings on the relationship between RNA modification and EC are still very limited, especially m6A. For example, what is the elaborate mechanism by which RNA modification affects EC progression? Taking m6A modification as an example, what is the conversion mode of methylation and demethylation for RNAs, and how to achieve selective recognition of specific RNA? Understanding how they cope with various stimuli as part of in vivo and in vitro biological development, disease or tumor occurrence and development, and other processes is valuable and RNA modifications provide a distinctive insight into genetic information. The roles of these processes in coping with various stimuli, biological development, disease, or tumor development in vivo and in vitro are self-evident and may become a new direction for cancer in the future. In this review, we summarize the category, characteristics, and therapeutic precis of RNA modification, m6A in particular, with the purpose of seeking the systematic regulation axis related to RNA modification to provide a better solution for the treatment of EC.

Fabrication of Pillar‐Cage Fluorinated Anion Pillared Metal–Organic Frameworks via a Pillar Embedding Strategy and Efficient Separation of SO2 through Multi‐Site Trapping

AbstractFlue gas desulfurization is crucial for both human health and ecological environments. However, developing efficient SO2 adsorbents that can break the trade‐off between adsorption capacity and selectivity is still challenging. In this work, a new type of fluorinated anion‐pillared metal–organic frameworks (APMOFs) with a pillar‐cage structure is fabricated through pillar‐embedding into a highly porous and robust framework. This type of APMOFs comprises smaller tetrahedral cages and larger icosahedral cages interconnected by embedded [NbOF5]2− and [TaOF5]2− anions acting as pillars. The APMOFs exhibits high porosity and density of fluorinated anions, ensuring exceptional SO2 adsorption capacity and ultrahigh selectivity for SO2/CO2 and SO2/N2 gas mixtures. Furthermore, these two structures demonstrate excellent stability towards water, acid/alkali, and SO2 adsorption. Cycle dynamic breakthrough experiments confirm the excellent separation performance of SO2/CO2 gas mixtures and their cyclic stability. SO2‐loaded single‐crystal X‐ray diffraction, Grand canonical Monte Carlo (GCMC) simulations combined with density functional theory (DFT) calculations reveal the preferred adsorption domains for SO2 molecules. The multiple‐site host–guest and guest‐guest interactions facilitate selective recognition and dense packing of SO2 in this hybrid porous material. This work will be instructive for designing porous materials for flue gas desulfurization and other gas‐purification processes.

Fabrication of Pillar-Cage Fluorinated Anion Pillared Metal-Organic Frameworks via a Pillar Embedding Strategy and Efficient Separation of SO2 through Multi-Site Trapping.

Flue gas desulfurization is crucial for both human health and ecological environments. However, developing efficient SO2 adsorbents that can break the trade-off between adsorption capacity and selectivity is still challenging. In this work, a new type of fluorinated anion-pillared metal-organic frameworks (APMOFs) with a pillar-cage structure is fabricated through pillar-embedding into a highly porous and robust framework. This type of APMOFs comprises smaller tetrahedral cages and larger icosahedral cages interconnected by embedded [NbOF5]2- and [TaOF5]2- anions acting as pillars. The APMOFs exhibits high porosity and density of fluorinated anions, ensuring exceptional SO2 adsorption capacity and ultrahigh selectivity for SO2/CO2 and SO2/N2 gas mixtures. Furthermore, these two structures demonstrate excellent stability towards water, acid/alkali, and SO2 adsorption. Cycle dynamic breakthrough experiments confirm the excellent separation performance of SO2/CO2 gas mixtures and their cyclic stability. SO2-loaded single-crystal X-ray diffraction, Grand canonical Monte Carlo (GCMC) simulations combined with density functional theory (DFT) calculations reveal the preferred adsorption domains for SO2 molecules. The multiple-site host-guest and guest-guest interactions facilitate selective recognition and dense packing of SO2 in this hybrid porous material. This work will be instructive for designing porous materials for flue gas desulfurization and other gas-purification processes.

Novel probe based on rhodamine B and quinoline as a naked-eye colorimetric probe for dual detection of nickel and hypochlorite ions

This work demonstrates the design and straightforward syntheses of several novel probe-based on rhodamine B and 2-mercaptoquinoline-3-carbaldehydes as a naked-eye colorimetric probe, indicating a sensitive and selective recognition towards nickel (II) with a limit of detection 0.30 μmol L−1 (0.02 mg L−1). Further, by employing the oxidation property of hypochlorite (OCl−), this novel probe parallelly has been deployed to detect hypochlorite in laboratory conditions with a limit of detection of 0.19 μmol mL−1 and in living cells. Regarded to negligible cell toxicity toward mammalian cells, this probe has the potential to determine these analytes in in-vivo investigation and foodstuff samples.

Dual-Photoelectrode Fuel Cell Based Self-Powered Sensor for a Picomole Level Pollutant: Using an In Situ Molecularly Imprinted p-Type Organic Photocathode.

Developing a dual-photoelectrode fuel cell based self-powered sensor (DPFC-SPS) with an ideal signal output capability and high sensitivity performance for the detection of environmental pollutant atrazine (ATZ) has an important value. In this work, the in situ molecularly imprinting functionalized p-type organic semiconductor polyterthiophene (MI-pTTh) is used as a photocathode to construct a DPFC-SPS toward the typical environmental pollutant ATZ for the first time. Due to its excellent photoactivity, higher stability, and superior oxygen reduction reaction activity, pTTh serves as the photocathode material for constructing a self-powered sensing platform with a stable signal output and high photoelectric activity. Based on the sensitive light-triggered large self-bias of the DPFC-SPS, the open circuit potential (EOCV) of the device reaches 1.21 V and the maximum power density (Pmax) reaches 121.5 μW·cm-2, which is much higher than most reported PFC-SPSs. Simultaneously, in situ molecularly imprinted (MI) functionization of pTTh can further endow it with specific recognition ability, helping the constructed SPS achieve high sensitivity, selectivity, and effective recognition of the important environmental pollutants ATZ in complex systems. It exhibits a broad linear relationship from 0.002 to 100 nM and a low detection limit (estimated by S/N > 3) of 0.21 pM toward ATZ. The mechanism of the binding kinetics of the MI-pTTh with the target ATZ is further studied via in situ infrared spectroscopy. This work provides theoretical guidance for sensing strategies using dual-photoelectrode devices and offers a rational device design for cost-effective electricity generation from renewable resources.

Selective recognition of Zn(II) by a novel Schiff base chemosensor with the formation of an AIE active Zn(II) complex having picric acid detection ability: Application in live cell imaging study

The present work highlights the development and spectroscopic identification of a Schiff base chemosensor, (Z)-4-bromo-2-(((1-methoxybutan-2-yl)imino)methyl)phenol, (HL), for selective detection Zn(II) via turn-on fluorescence among a number of competing cations in a 9:1 DMSO-water media. The high binding constant value, measured during titration of HL and Zn(II), boosts to conduct a straightforward condensation reaction between HL and Zn(II) which results in solid crystals of Zn(II) complex (complex 1). In 7:3 DMSO-water media, complex 1 display Aggregation Induced Emission (AIE) behavior, as a result of which, with increasing the water percentage, under UV light optically the cyan color complex 1 solution converts to green color with the enhancement of fluorescence intensity. The UV, fluorescence, DLS, and SEM studies, fully approve the probe's AIE active behavior. The AIE active property of complex 1 is implemented to detect picric via turn-off fluorescence. The chelation-induced enhanced fluorescence (CHEF) on and Excited state internal proton transfer (ESIPT) off are the key factors in showing the luminescence property of complex 1 and the distortion of aggregation behavior of complex 1 in the presence of picric acid leads to the turn-off fluorescence of the complex 1 solution. The mass spectral and IR spectral analysis supports the 1:1 stoichiometric addition of the probe and analyte and the structure of the probe-analyte complexes is optimized using density Functional Theory (DFT) study. Finally, the live cell imaging study enables us to independently verify the biosensing behavior of complex 1 and HL towards Zn(II) and picric acid respectively.

Homogeneous detection of viral nucleic acid via selective recognition proximity ligation and signal amplification with T7 transcription and CRISPR/Cas12a system

The synthetic biology has employed the synthetic gene networks through engineering to construct various functions in biological systems. However, the use of gene circuits to create sensors for detecting low-abundance targets has been limited due to the lack of signal amplification strategies beyond direct output of detection signals. To address this issue, we introduce a novel method utilizing Selective Recognition Proximity Ligation and signal amplification with T7 Transcription and CRISPR/Cas12a system (SRPL-TraCs), which permits the incorporation of cell-free gene circuits with signal amplification and enables the construction of high-order cascade signal amplification strategy to detect biomarkers in homogeneous systems. Specifically, the SRPL-TraCs utilizes selective recognition proximity ligation with high-fidelity T4 DNA ligase and generates a unique crRNA via T7 transcription, along with target-activated Cas12a/crRNA system to achieve excellent specificity for HIV-1 DNA. With this straightforward synthetic biology-based method, the proposed SRPL-TraCs has the potential to detect numerous other interesting targets beyond the nucleic acids.

Hybrid chain reaction and selective recognition-based homogeneous dual-fluorescence analysis of circulating tumor cells in clinical ovarian cancer samples

BackgroundOncological analysis is important in tumor diagnosis. We constructed a dual-fluorescence and binary visual analysis system for circulating tumor cells (CTCs) using the folate receptor as a biomarker, combined with hybridization chain reaction and nanomaterial amplification. This strategy integrates terminal protection, selective recognition properties of N-methyl mesoporphyrin IX and CdTe quantum dots for Cu2+ and double-stranded templated copper nanoparticles, and inkjet printing technology. ResultsIn fluorescence mode, folate receptor and A2780 ovarian cancer cells were specifically detected with a limit of detection of 0.1 fg mL−1, and 10 cells mL−1 were observed. The detection limits of both the color and distance reading modes were comparable to those obtained in fluorescence mode. The applicability of the method for quantifying CTCs was validated using 27 (6 negative and 21 positive) clinical ovarian cancer samples; the results agreed with those of both the clinical folate receptor-polymerase chain reaction kit and radiological and pathological results. SignificanceThis dual-fluorescence and binary visual CTCs detection method provides multiple options for clinical tumor liquid biopsy.

A Closed Cavity Strategy for Selective Dipeptide Binding by a Polyaromatic Receptor in Water.

Precise recognition of peptides is a daunting task owing to the substantial number of available amino acids and their combination into various oligo/polymeric structures in addition to the high hydration of their flexible frameworks. Here, we report the selective recognition of a dipeptide through a closed cavity strategy, in contrast to previous synthetic receptors with open cavities. A polyaromatic receptor with a virtually isolated, hydrophobic cavity exclusively binds one molecule of phenylalanine dipeptide from a mixture with its amino acid and tripeptide in water via multiple CH-π and hydrogen-bonding interactions in the complementary cavity. The binding selectivity persists even in the presence of other dipeptides, such as leucine-leucine, leucine-phenylalanine, tyrosine-phenylalanine, tryptophan-tryptophan, and aspartame, revealed by NMR/MS-based competitive binding experiments. ITC studies reveal that the selective binding of the phenylalanine dipeptide is relatively strong (Ka = 1.1 × 105 M-1) and an enthalpically and entropically favorable process (ΔH = -11.7 kJ mol-1 and TΔS = 17.0 kJ mol-1). In addition, the present receptor can be used for the emission detection of the dipeptide through a combination with a fluorescent dye in water.

3,5-Dihydroxybenzoic Acid-Based Selective Dopamine Detection via Subsititution-Enhanced Kinetics Differences.

The selective recognition of dopamine (DA) over other neurotransmitter analogues is difficult due to the similar molecular structure and chemical reactivity. In this study, substitution-regulated chemical reactivity of the sensing substrate is utilized to explore a novel DA detection probe with satisfying selectivity. As a case study, 3,5-dihydroxybenzoic acid (DHBA, carboxy-substituted resorcinol)-based probes have been explored for selective and ratiometric DA sensing. The carboxy substitution benefits the stabilization of the carbanion intermediate and the azamonardine product, which enhances the reaction kinetics and thermodynamics and subsequently facilitates selective DA recognition over other analogues and interferents. By exploring DHBA emission as the internal reference, ratiometric fluorescence variation is realized, which contributes to sensitive DA analysis. With the combination of logic gate and fluorometric analysis, DA detection in both low and high concentrations can be readily achieved. In addition, the DA analysis in biological samples and the enzymatic transformation of DA analogues in cerebrospinal fluid samples are achieved by the proposed DHBA probe.

One-pot hydrothermal green synthetic approach of fluorescent carbon dots as optical probes for 2-nitrophenol

The pursuit of a cost-effective and green synthetic approach to chemical sensors and their application in the sensing of toxic and harmful substances is a never-ending exercise for scientists and researchers. Preparation of fluorescent carbon dots (C-dots) from biomass using water as a solvent and a hydrothermal autoclave to provide the required synthesis temperature offers a cheap and environmentally friendly synthetic approach. Herein, we report a faster, less costly and ecofriendly hydrothermal synthetic approach of carbon dots from Citrullus vulgaris peels as a precursor. The as-prepared carbon dots exhibited hydroxyl, carbonyl and amide functional groups on the surface and an amorphous structure with a particle size distribution of 1.7–3.0 nm. Moreover, the carbon dots displayed intense blue emission fluorescence at 470 nm after excitation at 400 nm. The as-prepared carbon dots demonstrated effective application without further modification towards the selective and sensitive optical recognition of 2-nitrophenol used in the manufacture of explosives. A limit of detection of 2.28×10−7 M was achieved, and no fluorescence quenching was observed in the presence of other nitroaromatic and benzene derivatives indicating excellent selectivity towards 2-nitrophenol. Finally, further studies are required to investigate the potential for the as-prepared carbon dots to monitor nitroaromatic pollutants in real environmental systems.

Biomass-Derived Core-Shell Carbon Dots with Embedded Tripodal Receptors for the Selective Recognition of Mefenamic Acid in Pharmaceutical Formulations and Urine.

A tripodal amine (TPA) with -OH, N, and S donors is synthesized to functionalize a core-shell carbon dot composite (FCDs@SiO2-TPA) for sensing application. The TPA is characterized by spectroscopic and spectrometric techniques, and the composite is characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectra (EDS) techniques. The composite has the ability to recognize mefenamic acid (MFA) selectively even in the presence of other drugs like ibuprofen sodium, acetylsalicylic acid, naproxen sodium, diclofenac sodium, and ketoprofen. It can also be used for the quantification of MFA by recording the emission quenching response of the sample at λexc. = 350 nm and λems. = 460 nm (linear range = 1-8 μM and LOD = 197 nM). The density functional theory calculations and 1H NMR titration suggest quenching of the emission signal due to photoinduced electron transfer via hydrogen bonding between the probe and MFA. The composite FCDs@SiO2-TPA has been demonstrated as a reliable and cost-effective sensing probe for the detection of MFA in pharmaceutical formulations, water samples, and cow urine samples.

Ultra-highly selective recognition of nucleosides over nucleotides by rational modification of tetralactam macrocycle and its application in enzyme assay

Artificial macrocycle with high binding selectivity in water is often challenging but urgently needed in various research and application areas. Herein, we report a new water-soluble biomimetic tetralactam macrocycle and realize the ultra-high selectivity to nucleosides over corresponding monophosphate nucleotides by rational modification. The introduction of charged groups at the periphery of endo-functionalized cavity makes the selectivity (guanosine to guanosine 5′-monophosphate) increase remarkably from 100 to 1119. Based on the ultra-high selectivity of biomimetic tetralactam macrocycle, the sensitive CD73 enzyme activity assay was then achieved through product-selective fluorescence indicator displacement assay. Furthermore, the capability of the proposed method for inhibitor screening was successfully displayed.

Selective Water Pore Recognition and Transport through Self-Assembled Alkyl-Ureido-Trianglamine Artificial Water Channels.

In nature, aquaporins (AQPs) are proteins known for fast water transport through the membrane of living cells. Artificial water channels (AWCs) synthetic counterparts with intrinsic water permeability have been developed with the hope of mimicking the performances and the natural functions of AQPs. Highly selective AWCs are needed, and the design of selectivity filters for water is of tremendous importance. Herein, we report the use of self-assembled trianglamine macrocycles acting as AWCs in lipid bilayer membranes that are able to transport water with steric restriction along biomimetic H-bonding-decorated pores conferring selective binding filters for water. Trianglamine [(±)Δ, (mixture of diastereoisomers) and (R,R)3Δ and (S,S)3Δ], trianglamine hydrochloride (Δ.HCl), and alkyl-ureido trianglamines (n = 4, 6, 8, and 12) [(±)ΔC4, (±)ΔC8, (±)ΔC6, and (±)ΔC12] were synthesized for the studies presented here. The single-crystal X-ray structures confirmed that trianglamines form a tubular superstructure in the solid state. The water translocation is controlled via successive selective H-bonding pores (a diameter of 3 Å) and highly permeable hydrophobic vestibules (a diameter of 5 Å). The self-assembled alkyl-ureido-trianglamines achieve a single-channel permeability of 108 water molecules/second/channel, which is within 1 order of magnitude lower than AQPs with good ability to sterically reject ions and preventing the proton transport. Trianglamines present potential for engineering membranes for water purification and separation technologies.

Development of an azo-functionalized ion-imprinted polymer for selective recognition of palladium ions

The current work reports the development of a new azo-functionalized ion-imprinted material for specific recognition of palladium ions (Pd2+). The ion-imprinted material was synthesized via a free radical polymerization approach, enabling convenient access to Pd2+. First, a maleimide-phenolic azo-functionalized ligand (MIZOH) was synthesized and combined with Pd2+ to form the corresponding [Pd(MIZO)2] complex. The copolymerization was then proceeded with utilizing 2,2-azobisisobutyronitrile (AIBN) as an initiator with styrene and divinylbenzene crosslinkers in the presence of the [Pd(MIZO)2] monomer complex. A solution mixture of thiourea/HNO3 was used to extract the Pd2+ ions. Various methodologies were employed to investigate the synthesized ligands, complexes, and polymers. Batches were conducted to evaluate the adsorption characteristics, including pH, capacity, contact time, selectivity, and recyclability. The results suggest that at a temperature of 30 °C and a solution pH of 6, the adsorption capacity was around 155 mg/g. The kinetic analyses exhibited a high degree of conformity with the pseudo-second-order kinetics. The Langmuir and Freundlich isothermal equations were constructed using equilibrium data, which exhibited a favorable level of conformity with the Langmuir isothermal model. Interference experiments show that the Pd2+ ion-imprinted polymer has a stronger attraction to Pd2+ than it does to the other ions that could be in the solutions. Additionally, there has been no appreciable decline in the affinity of the wasted polymer after at least five regeneration cycles.

Microfluidic-based molecularly imprinted polymers-integrated optic sensors

Molecularly imprinted polymers (MIPs) are cheap and easily prepared polymers that have specific recognition sites for the target molecule that suitable for recognition. MIPs are also synthetic materials designed to mimic the recognition properties of natural antibodies or receptors. The development of MIPs in optic sensors has introduced a significant novelty in the field of sensing technology. When integrated into optic sensors, MIPs offer several advantages and novel capabilities including selective recognition, versatility, stability and reusability, signal amplification, and tailored sensor design. Microfluidic systems are enable the control and movement of fluids in small volumes within micro-scale channels. MIPs, optic sensors and microfluidic systems have important superior features such as sensitivity, selectivity and low sample requirement. They are used together in the creation of fast, automated and self-contained systems. The combination of advantages makes microfluidic-based MIPs-integrated optic sensors a promising technology for various applications in analytical sciences, biomedical research, and environmental monitoring.In this review, we first described molecular imprinting method, molecularly imprinted polymers, microfluidic systems, optic sensors and then mentioned different microfluidic-based molecularly imprinted polymers-integrated optic sensors platform for various molecule detection as applications in several working fields.

Synthesis, Optical Properties and Cellular Toxicity of Water-Soluble near Infrared-II Fluorescent Assemblies Based on Pillar[5]arene.

The main challenges in second near-infrared region molecular fluorophores are poor water solubility and unknown long-term toxicity at present. Herein, new NIR-II molecular fluorophores have been designed and employed to integrate biocompatible pillar[5]arene with 10 outer triethylene oxide groups for the synthesis of rotaxane IRCR. In addition, PEGylated pillar[5]arenes have been combined for the self-assembly of two supramolecular vesicular systems, i.e., PP5-IR1 and PP5-IR2, affording aqueous solubility and lowered cellular toxicity. In aqueous solution, all these fluorophores displayed room-temperature emission with λmax at 986-1013 nm and quantum yields of 0.54-1.45%. They also exhibited good chemical stability and reasonable self-assembled sizes, which may find potential applications in NIR-II imaging. In addition, PP5-IR1 can be used as a fluorescent chemosensor for selective recognition of glutathione through the cleavage of dinitrophenyl ether and release the fluorescent dye.

All-solid-state chip utilizing molecular imprinted polymer for erythromycin detection in milk samples: Printed circuit board-based potentiometric system

Detection of erythromycin (ERY) residues in commercial milk samples is crucial for the safety assessment. Herein, a printed circuit board was patterned as a feasible miniaturized potentiometric sensor for ERY determination in dairy samples. The proposed chip design fits to a 3.5-mm female audio plug to facilitate the potential measurements of working electrode versus reference one in this all-solid-state system. The sensor utilizes molecular imprinted polymer (MIP) for the selective recognition of the studied drug in such challenging matrix. The electrode stability is achieved through the addition of poly (3,4-ethylenedioxythiophene) nano-dispersion on its surface. The proposed device detects down to 6.6 × 10−8 M ERY with a slope of 51 mV/decade in the 1 × 10−7–1 × 10−3 M range. The results display high accuracy (99.9% ± 2.6) with satisfactory relative standard deviation for repeatability (1.6%) and reproducibility (5.0%). The effect of common antibiotic classes, namely, amphenicols, beta-lactams, fluoroquinolones, sulfonamides, and tetracyclines, can be neglected as evidenced by their calculated binding capacities towards the proposed MIP. The calculated selectivity coefficients also show a good electrode performance in the presence of naturally present inorganic ions allowing its application to different milk samples.Graphical abstract