Selective Detection Research Articles

A Zn-MOF-based mixed matrix membrane as an ultrastable luminescent sensor for selective and visual detection of antibiotics and pesticides in food samples

The detection of antibiotics and pesticides are of great significance since their residues threaten the health of human beings by accumulation. However, most traditional solid chemical sensors are suffer from the limitations of low sensitivity and economic practicability because of the aggregating nature and unstable of solid sensors. Herein, a new luminescent sensor 1@ PMMA (1, {(ZnL)·nH2O}n (H2L, 5-(4-(pyridin-4-yl)benzamido)benzene-1,3-dioic acid); PMMA, poly(methyl methacrylate)) was successfully prepared. Notably, the polymer matrix provided the chemical protection for MOF particles. The as fabricated 1@PMMA was stable in milk, honey and egg as well as exhibited strong blue emission under ultraviolet light irradiation, which can act as luminescent probe for detecting antibiotics and pesticides. More interestingly, 1@PMMA exhibited visual, real-time and recyclable detection of antibiotics ornidazole (ODZ) and pesticides 2,6-dichloro-4-nitrobenzenamine (DCN) in real food samples. This work shows that the luminescent MOF-based mixed matrix membranes could be applied as good candidates for sensing analytes in practical application.

Innovative use of shrimp shell powder in carbon paste electrode for the electrochemical detection of dopamine and paracetamol: Valorization, characterization and application

The present study outlines the design of an innovative, cost-effective, and environmentally friendly electrochemical sensor, based on a carbon paste electrode (CPE) modified by shrimp shell waste (SSW). The developed electrode was used to facilitate the electrocatalytic detection of two compounds, namely dopamine (DA) and paracetamol (PAR). The use of SSW as an electrode material is ground breaking. The results have shown that the addition of shrimp shell (SS) in the CPE has led to a significant increase in the active surface area (0.504 cm2) and has improved electron transfer by decreasing the charge transfer resistance (17.45 Ω.cm2) at the electrode/solution interface. The SSW was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffractometry (XRD), and fourier transform infra-red (FTIR). The results show a fibrous and porous structure with high calcium content and other chemical elements including carbon, oxygen, sulphur, phosphorus and nitrogen. The electrochemical behavior of DA and PAR on the CPE-SS electrode was studied using cyclic voltammetry (CV), chronoamperometry (CA), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV) techniques. Additionally, CPE and CPE-SS electrodes were examined by SEM/EDS and FTIR. The effect of scan rate shows that the electrochemical process is diffusion controlled for DA and PAR. The CPE-SS electrode provide a wide linear range, good selectivity, repeatability, precision (≤5%), and low detection limits 3.6 µM and 5.54 µM for DA and PAR, respectively. In addition, the developed sensor was applied to detect DA and PAR in urine, tap water, and pharmaceutical tablets with apparent recoveries.

Split Fluorescent Protein-Mediated Multimerization of Cell Wall Binding Domain for Highly Sensitive and Selective Bacterial Detection

Cell wall peptidoglycan binding domains (CBDs) of cell lytic enzymes, including bacteriocins, autolysins and bacteriophage endolysins, enable highly selective bacterial binding, and thus, have potential as biorecognition molecules for nondestructive bacterial detection. Here, a novel design for a self-complementing split fluorescent protein (FP) complex is proposed, where a multimeric FP chain fused with specific CBDs ((FP-CBD)n) is assembled inside the cell, to improve sensitivity by enhancing the signal generated upon Staphylococcus aureus or Bacillus anthracis binding. Flow cytometry shows enhanced fluorescence on the cell surface with increasing FP stoichiometry and surface plasmon resonance reveals nanomolar binding affinity to isolated peptidoglycan. The breadth of function of these complexes is demonstrated through the use of CBD modularity and the ability to attach enzymatic detection modalities. Horseradish peroxidase-coupled (FP-CBD)n complexes generate a catalytic amplification, with the degree of amplification increasing as a function of FP length, reaching a limit of detection (LOD) of 103 cells/droplet (approximately 0.1ngS. aureus or B. anthracis) within 15min on a polystyrene surface. These fusion proteins can be multiplexed for simultaneous detection. Multimeric split FP-CBD fusions enable use as a biorecognition molecule with enhanced signal for use in bacterial biosensing platforms.

Highly selective and sensitive Pb2+ detection via sulfur-doped graphitic carbon nitride modified by Bi nanospheres

The present-day human race is facing a series of environmental problems due to sewage discharge, excessive use of chemicals, mineral exploitation and so on, which are closely related to the rapid development of industries. The direct consequence is that the pollution of heavy metal ions is becoming more and more serious. It is very important to develop sensitive and efficient methods for detecting heavy metal ions. In this study, the nanocomposite of sulfur-doped graphitic carbon nitride (SCN) and Bi nanospheres (BiNSs) was prepared by thermal polycondensation reaction to introduce the sulfur into carbon nitride, followed by solvothermal method to realize the decoration of BiNSs. The SCN/BiNSs nanocomposite presents a highly selective and sensitive electrochemical detection capacity for Pb2+, derived from S-Pb strong bonding interaction and Bi-Pb binary alloy formation. The low detection limit of 0.07 μM could be achieved when the current response of Pb2+ was measured in the linear range of 0.1 μM − 4.5 μM by square wave anodic stripping voltammetry. The detection of Pb2+ in actual water specimens led to a recovery rate varied from 88 to 123 %. Further, in the presence of 20-fold interfering ions such as Zn2+, Fe3+, Cd2+, Cu2+, Fe2+ and Ni2+, the SCN/BiNSs-modified electrode still possesses excellent immunity and selectivity. Meanwhile, the remarkable stability, repeatability and reproducibility of the above sensing electrode have also been demonstrated. Our primary results show that the SCN/BiNSs nanocomposite holds great potential for practical application for Pb2+ detection.

A smartphone-combined ratiometric fluorescence molecularly imprinted probe based on biomass-derived carbon dots for determination of tyramine in fermented meat products

A ratiometric fluorescence molecularly imprinted probe employing two distinct emission wavelengths of biomass carbon dots was developed for highly selective and visual quantitative detection of tyramine in fermented meat products. The red emission biomass carbon dots were employed as responsive elements, and the blue ones were utilized as the reference elements. The molecularly imprinted polymers were incorporated in the ratiometric sensing to distinguish and adsorb tyramine. With the linear range of 1–60 μg/L, the ratiometric fluorescence molecularly imprinted probe was successfully applied to detect tyramine in real samples with the satisfactory recoveries of 79.74–112.12% and the detect limitation of 1.3 μg/kg, indicating that this probe has great potential applications for the detection of tyramine in real samples. Moreover, smartphone-based fluorescence signal recognition analysis on hand has been developed for the quantitative analysis of tyramine, providing a portable visual optical analysis terminal for rapid on-site determination of tyramine.

A Novel Mechano-Synthesized Zeolitic Tetrazolate Framework for a High-Performance Triboelectric Nanogenerator and Self-Powered Selective Neurochemical Detection.

Designing a high-performing triboelectric novel material with eco-friendly, rapid, and cost-effective synthesis is the future of material research in triboelectric nanogenerators (TENG). We report a mechanochemical ball mill synthesis of a zeolitic tetrazolate framework (ZTF-8) that is isostructural with the well-known zeolitic imidazolate framework ZIF-8. ZTF-8 is extremely stable in water, 0.1 M aqueous acid/base solutions for 75 days at 25 °C, and boiling water (100 °C) for 7 days. Kelvin probe force microscopy and molecular electrostatic surface potential computational analysis exhibited that ZTF-8 has a very high positive surface potential. Atomic force microscopy and three-dimensional digital microscopy studies reveal the high roughness profile in the ZTF-8 film. The unique structure, exceptional acid/base stability, good dielectric property, and high roughness profile combined with the extremely electropositive nature of ZTF-8 make it a suitable candidate as a polymer-free triboelectric positive material in TENG with outstanding performance (power density of 720 mW/m2). High triboelectric output was further validated using the COMSOL Multiphysics simulation tool. Simple mechanical hand tapping of the ZTF-based TENG (ZTF-TENG) device generates high electric output, which was practically used to power numerous low-powered devices like tally counter, clinical thermometer, and digital clock and also illuminates 125 light-emitting diodes. In addition, the efficiency of ZTF-TENG was utilized as a self-powered device for a selective dopamine (DA) sensor with good sensitivity (377.76 mV/μM/cm2), wide range linearity (5-120 μM), and excellent limit of detection (0.42 μM).

Salinity and flow pattern independent flow rate measurement in a gas-liquid flow with optimum feature selection and novel detection geometry using ANNs

This paper presents a study on the salinity determination and flow rate estimation in a two-phase air-water system. For this purpose, an automated air-water test loop capable of generating different flow patterns in a horizontal pathway was utilized to do numerous experiments at varying flow rates. A nuclear measuring setup, comprising Cs-137 and Am-241 as radiation sources, one NaI (Tl) scintillation detector to register transmission counts of Cs and three scintillator detectors for registering transmission and scattering counts from Am, was prepared. A pressure drop pipe was also employed for flow rate measurement, with MLPs were selected as the processing element. Notable innovations of this paper can be considered from two perspectives. Firstly, a novel paradigm in nuclear measurement geometry. This novelty uses the benefits of three scintillator detectors to extract features with the maximum potential for classifying and determining salinity. Secondly, there is a new method in data processing and utilizing optimum features to achieve the best performance in predicting flow rates. Results in flow rate prediction independent of salinity and flow regime indicate that the proposed paradigm and method are reliable for using in industrial fields related to multi-phase metering.

Biological recognition element anchored 2D graphene materials for the electrochemical detection of hazardous pollutants

The detection of hazardous pollutants in environmental and industrial settings is of critical importance for safeguarding human health and the ecosystem. Recent years witnessed significant progress and development in novel sensing platforms. The combination of biological recognition elements with two-dimensional (2D) materials enhanced the selectivity and sensitivity of pollutant detection. This review focuses on the integration of biological recognition elements, such as antibodies, nucleic acids, enzymes, aptamers, and proteins with 2D graphene for electrochemical detection of hazardous pollutants. The unique properties of graphene include high electrocatalytic activity, high surface area, and excellent conductivity, combined with the specificity and affinity of biological recognition elements, enabling selective and sensitive detection of hazardous pollutants. The synergistic coupling between 2D graphene and biological recognition elements offers several advantages, including improved sensor performance, rapid response, and potential for multi-analyte detection. Furthermore, the immobilization strategies, surface modifications, and fabrication techniques employed to anchor biological recognition elements onto graphene are discussed. The application of these bio-functionalized 2D material-based sensors for the detection of various hazardous pollutants, such as heavy metals, organic compounds, and environmental toxins, is highlighted. Moreover, the challenges and future perspectives in this field are addressed, including sensor stability, scalability, and the integration of advanced technologies, such as nanotechnology and artificial intelligence, for real-time monitoring and data analysis.

Detecting viscosity changes in the limb ischemia-reperfusion in mice with a near-infrared fluorescence probe

BackgroundLimb ischemia-reperfusion is a common phenomenon in clinical surgery, which disrupts the balanced physiological response process and ultimately leads to changes in intracellular viscosity. Intracellular viscosity is an important microenvironmental parameter that affects the normal function of organisms, and its level is closely related to many diseases. In addition, oxidative stress in the lower limbs can impair body function, and changes in pressure can lead to changes in the viscosity of limb tissues. Therefore, it is necessary to develop effective tools to detect changes in intracellular viscosity and visualize the progression of hind limb ischemia-reperfusion injury. ResultsIn order to solve this problem, a near infrared viscometry sensitive fluorescence probe (PH-XQ) with long emission wavelength and stable luminescence performance was designed and synthesized by using oxanthracene derivatives and malononitrile. The fluorescence probe (PH-XQ) has excellent selectivity, high sensitivity, low toxicity, high biocompatibility and excellent detection performance. The fluorescence intensity of the PH-XQ probe at 667 nm is highly sensitive to the change of viscosity. With the increase of viscosity, the fluorescence intensity of probe PH-XQ was significantly enhanced, and the fluorescence enhancement ratio was about 14-fold. In addition, PH-XQ can detect not only changes in viscosity between normal cells and drug-induced inflammatory cells, but also changes in the viscosity of the hind limbs of normal mice and mice after ischemia reperfusion. SignificanceIn particular, we are the first to successfully detect changes in handlimb viscosity after ischemia-reperfusion in mice using a probe. This study clearly elucidates changes in viscosity during ischemia-reperfusion of mouse limbs, providing favorable support for the relationship between viscosity and related diseases, and further providing a potential tool for the diagnosis of viscosity-related diseases.

Simultaneous and sensitive detection of methylparaben and its metabolites by using molecularly imprinted solid-phase microextraction fiber array technique

Simultaneous and sensitive detection of methylparaben and its metabolites by using molecularly imprinted solid-phase microextraction fiber array technique

Ultra-highly sensitive dual gases detection based on photoacoustic spectroscopy by exploiting a long-wave, high-power, wide-tunable, single-longitudinal-mode solid-state laser.

Photoacoustic spectroscopy (PAS) as a highly sensitive and selective trace gas detection technique has extremely broad application in many fields. However, the laser sources currently used in PAS limit the sensing performance. Compared to diode laser and quantum cascade laser, the solid-state laser has the merits of high optical power, excellent beam quality, and wide tuning range. Here we present a long-wave, high-power, wide-tunable, single-longitudinal-mode solid-state laser used as light source in a PAS sensor for trace gas detection. The self-built solid-state laser had an emission wavelength of ~2 μm with Tm:YAP crystal as the gain material, with an excellent wavelength and optical power stability as well as a high beam quality. The wide wavelength tuning range of 9.44 nm covers the absorption spectra of water and ammonia, with a maximum optical power of ~130 mW, allowing dual gas detection with a single laser source. The solid-state laser was used as light source in three different photoacoustic detection techniques: standard PAS with microphone, and external- and intra-cavity quartz-enhanced photoacoustic spectroscopy (QEPAS), proving that solid-state laser is an attractive excitation source in photoacoustic spectroscopy.

Synergistic effect of inner filtering effect and host-guest interaction based on β-cyclodextrin fluorophore for promoted 4-nitrophenol detection

Efficient detection of 4- nitrophenol (4-NP) organic pollutant is always a very important issue due to the rapid development of chemical industry and the abuse of pesticides and so on. Here, we designed and synthesized a novel supramolecular fluorescent probe, 4-[4-(acetylamino)styryl]-1-cyclodextrin pyridinium p-toluenesulfonate (ASPT-β-CD), for the selective and sensitive detection of 4-NP. The introduction of β-CD not only improves the water solubility of probe and can also be used as a host to encapsulate 4-NP. In alkaline aqueous solution, the absorption spectrum of 4-NP overlaps the excitation spectrum of ASPT-β-CD and suggests that an internal filtration effect occurs between them. We explored the possible response mechanism and speculated that the high selectivity and high sensitivity were derived from the synergistic effect of inner filtering effect and host-guest interaction. Benefiting from the synergistic effect, the proposed sensor ASPT-β-CD displayed significant "turn-off" after adding 4-NP, while showing a fast response to 4-NP within 2min and low LOD about 0.01μM. In addition, this method has been successfully applied to the determination of 4-NP in lake water samples, indicating that the obtained ASPT-β-CD has great practical application potential in the environmental field.

Manipulation of magnetic beads for actively capturing Vibrio parahaemolyticus and nucleic acid based on microfluidic system.

Rapid biological detection of pathogen micro-organisms has attracted much attention for practical biomedical applications. Despite the development in this field, it is still challenging to achieve simple and rapid biological detection using the microfluidic method. Herein, we propose a novel strategy of biological detection that combines precise detection control of the capillary microfluidic chip and versatile manipulation of magnetic beads. The microfluidic chip was fabricated via laser cutting, which utilized capillary pressure to realize rapid passive injection of liquid samples. Under an external magnetic field, the aptamer-modified magnetic beads were actuated to mix with Vibrio parahaemolyticus (V. parahaemolyticus) and its nucleic acid in the capillary microfluidic chip for rapid selective capture and detection, which could be achieved within 40 min. The experimental results demonstrated that V. parahaemolyticus could be captured using on-chip immunomagnetic beads with a high efficiency and significantly enhanced detection value. Due to these superior performances, the capillary microfluidic system, based on the manipulation of magnetic beads, demonstrated great potential for automatic biological detection.

A highly sensitive and selective fluorescent “on–off-on” peptide-based probe for sequential detection of Hg2+ and S2− ions: Applications in living cells and zebrafish imaging

Mercury ions (Hg2+) and sulfur ions (S2−), have caused serious harm to the ecological environment and human health as two kinds of highly toxic pollutants widely used. Therefore, the visual quantitative determination of Hg2+ and S2− is of great significance in the field of environmental monitoring and medical therapy. In this study, a novel fluorescent “on–off-on” peptide-based probe DNC was designed and synthesized using dipeptide (Asn-Cys-NH2) as the raw material via solid phase peptide synthesis (SPPS) technology with Fmoc chemistry. DNC displayed high selectivity in the recognition of Hg2+, and formed non-fluorescence complex (DNC-Hg2+) through 2:1 binding mode. Notably, DNC-Hg2+ complex generated in situ was used as relay response probe for highly selective sequential detection of S2− through reversible formation-separation. DNC achieved highly sensitive detection of Hg2+ and S2− with the detection limits (LODs) of 8.4 nM and 5.5 nM, respectively. Meanwhile, DNC demonstrated feasibility for Hg2+ and S2− detections in two water samples, and the considerable recovery rate was obtained. More importantly, DNC showed excellent water solubility and low toxicity, and was successfully used for consecutive discerning Hg2+ and S2− in test strips, living cells and zebrafish larvae. As an effective visual analysis method in the field, smartphone RGB Color Picker APP realized semi-quantitative detections of Hg2+ and S2− without the need for complicated device.

Fluorescent nanocomposites of Ag nanoclusters grown in anionic polymer layers grafted to plastic substrate: Preparation, characterization and evaluation in Hg2+ sensing and white light generation

AbstractFluorescent noble metal nanoclusters (NCs) are emerging optical nanomaterials with properties similar to those of quantum dots. Their applications can be expanded by combining them with polymer matrices to obtain flexible and transparent light‐emitting nanocomposites. However, achieving highly fluorescent nanocomposites of this type remains challenging due to phase separation and aggregation of NCs in polymer hosts leading to a strong reduction in fluorescence efficiency. We address this key issue by covalently grafting a layer of a specifically selected matrix polymer onto a transparent plastic film and photochemically synthesizing the fluorescent metal NCs directly in the grafted layer. The surface‐grafted matrix polymer effectively captures the noble metal (Ag) ions, photo‐reduces them to atoms, acts as a capping ligand for the growing Ag NCs, and immobilizes them on the substrate surface. The Ag NCs were produced by both wet and dry synthesis, and effects of synthesis method, reaction time, and matrix polymer layer thickness on the fluorescence properties of the resulting nanocomposites were investigated and discussed. Importantly, the fluorescence intensity of these nanocomposite films is sensitive to submicromolar concentrations of aqueous Hg2+ that makes them useful as fluorescent sensing materials for selective and ultrasensitive detection of Hg2+ ions in water. Besides, the nanocomposite films obtained by the dry synthesis of NCs exhibit an intensive emission covering the whole green to red range of the visible spectrum and, hence, produce bright white light under illumination with a blue LED that makes them attractive as down‐conversion materials in one‐phosphor‐converted white LEDs.

Fabrication of magnetic hydrophilic imprinted polymers via two-step immobilization approach for targeted detecting bisphenol A

Molecularly imprinted polymer with water-compatibility for effective separation and enrichment of targeted trace pollutants from complicated matrix has captured extensive attention in terms of their high selectivity and matrix compatibility. This study focuses on modified β-cyclodextrin is used as a hydrophilic functional monomer to develop magnetic molecularly imprinted polymers (MMIPs). MMIPs were prepared using Fe3O4 nanoparticles as carriers and bisphenol A (BPA) as templates using a two-step fixation strategy and surface imprinting technology. The structural characteristic and binding properties of the prepared MMIPs were thoroughly studied. The MMIPs exhibited high crystallinity, high adsorption capacity, fast rebinding rate, remarkable selectivity and distinguish reusability. In addition, through magnetic solid-phase extraction separation technology and high-performance liquid chromatography ultraviolet quantitative detection technology, MMIPs are used for selective enrichment and detection of BPA in complex media such as environmental water and milk. This work provides a new route to construct the hydrophilic molecularly imprinted materials and a new sight on developing more effective sample pretreatment strategies for monitoring targeted pollution in complicated aqueous media.

A turn-off fluorescent sensor based on Schiff base incorporating diformyl phenol moiety for the detection of Cu2+ in aqueous solution at nanomolar level and its application in living cells

Given the critical role of trace copper ion in human health, its sensitive detection in environmental and biological samples is crucial. We, herein, designed and synthesized a diformyl phenol-based turn-off fluorescent sensor ((5-(tert-butyl)-2-hydroxy-1,3-phenylene)bis (methanylylidene)) bis (azanylylidene)) bis(4-hydroxy-2H-chromen-2-one) (MH-4)) for the spectrofluorometric detection of Cu2+ ion, which has sensitive and selective fluorescence quenching over other competitive metal ions. The efficiency and fast response of the sensor were confirmed by UV–Visible, fluorescence spectral changes, which may be due to the formation of coordination bond between MH-4 and Cu2+ ions. The binding stoichiometry of MH-4 with Cu2+ was examined with the help of UV–Vis and fluorescence titrations, and Job’s plot, which gives a 1:1 coordination stoichiometry; this is further confirmed through MS studies. The binding constant of the complex was found to be 9.4 x 107 M−1. Then, the absorbance and fluorescence-based detection limits were calculated to define the sensitivity range of the proposed sensor and were found to be 69.30 nM and 37.40 nM, respectively. Finally, a live cell image study of MH-4 in L929 (murine aneuploid fibrosarcoma) cells was also performed to test the cell permeability of MH-4 and its effectiveness for selective detection of Cu2+ in living cells.

Novel Schiff base embedded in nanostructured molecularly imprinted polymers as OFF–ON fluorescent sensor for highly selective detection of rutin residues in fruit juice

This study aimed to create a fluorescent novel Schiff base polymer (SBP) sensor for the detection of rutin (RT) flavonoid based on nanostructured molecularly imprinted polymer (SBM), precisely designed template molecules, and site-specific post-imprinting modifications. The fabricated SBM sensor was characterized in detail, and the prepared SBM exhibited stable and sensitive reproducible fluorescence response and highly selective recognition capability for detecting trace amounts of RT. Besides, the influential factors, such as pH and incubation time were performed in the optimal extraction conditions. The calibration curve yields a linear range for the detection of RT under optimal conditions. The linear fluorescence response of SBM to RT was obtained in the concentration range of 1-200μgL− 1 (R2 = 0.9988) with a limit of detection (LOD) of 0.024μgL-1. The SBM presented satisfying recoveries with a relative standard deviation of less than 3.0% (n = 7) in spiked samples. The sensor shows broad prospects in the quality evaluation and grading of functional foods, as it can rapidly identify and quantify RT in red raspberry and green tea samples.

Selective Detection of Glucose by Linear Sweep Voltammetry Using a Copper–Polyaniline Modified Glassy Carbon Electrode

Selective Detection of Glucose by Linear Sweep Voltammetry Using a Copper–Polyaniline Modified Glassy Carbon Electrode

MnO2 nanosheets based catechol oxidase mimics for robust electrochemical sensor: Synthesis, mechanism and its application for ultrasensitive and selective detection of dopamine

Nanozymes have favorable activity and good stability, which are potential alternatives to natural enzymes and widely applied in biosensing. However, nanozymes based electrochemical sensors are fewer, because many nanozymes are not easy to form efficient electrocatalytic interface and experience interference from the possible oxidizable species. Herein, ultrathin MnO2 nanosheets (MnO2 NSs) were synthesized by reduction of KMnO4 in acidic environment by chemical precipitation method. The MnO2 NSs show excellent catechol oxidase mimicking activity. The steady-state kinetics of MnO2 NSs shows a higher Vmax of 3.441 µM s−1. Additionally, the catalytic mechanism is that in the presence of oxygen, catechol or its analogues are oxidized to quinone or quinoids, while oxygen is reduced to H2O. Afterwards, the possible mechanism of dopamine (DA) at MnO2 NSs-modified electrode is investigated. DA is first catalytically oxidized to dopamine quinone (DQ) by MnO2 NSs based catechol oxidase, which further undergoes irreversible electrochemical reduction to DA involving two protons and two electrons transfer during the process. On the basis of this, a selective and ultrasensitive amperometric detection of DA at 0.0 V (vs. SCE) was explored, which have two linear parts, 0.01–20 μM and 20–100 μM DA with the LOD of 4.1 nM (S/N = 3). Most importantly, the presence of oxidizable species including ascorbic acid, uric acid and cysteine may coexist with DA in biological systems do not exhibit any appreciable interference. The as-proposed method was applicable to detect DA in human serum samples with good satisfactory accuracy and recovery. This research casts prospect to apply nanozymes for electrochemical sensor with excellent analytical performance.