Selective Caries Removal Research Articles

Remineralizing Ability of Resin Modified Glass Ionomers (RMGICs): A Systematic Review.

The selective caries removal approach leads to the need to use materials with the ability to remineralize remaining partially demineralized dentin. Among the materials proposed are resin-modified glass ionomer cements (RMGICs). The aim of this systematic review was to evaluate, based on in vitro experimental studies, whether RMGICs are suitable for remineralizing affected dentin. A systematic literature search was performed in four databases, followed by article selection, data extraction, and quality assessment. Studies assessing the remineralizing potential of RMGICs on dentin were included in our review. Studies which compared such properties between different RMGICs or with other materials were also eligible. The studies report the remineralizing ability of RMGICs, albeit with differences between different commercial products. RMGICs show a similar ability to conventional GICs to remineralize affected dentin, fulfilling the function for which they are designed. Moreover, the incorporation of additives, such as bioactive glass (BAG) or CCP-ACP, improves their remineralizing potential. The results of this review support the use of RMGICs as restorative materials after selective caries removal.

Selective Caries Removal to Soft or Firm Dentin

Selective Caries Removal to Soft or Firm Dentin

Factors Affecting the Decision-making of Direct Pulp Capping Procedures among Dental Practitioners: A Multinational Survey from 16 Countries with Meta-analysis

IntroductionDirect pulp capping (DPC) procedures require the placement of a bioactive material over an exposure site without selective pulp tissue removal. This web-based multicentered survey had 3 purposes: (1) to investigate the factors that affect clinicians’ decisions in DPC cases, (2) to determine which method of caries removal is preferred, and (3) to evaluate the preferred capping material for DPC. MethodsThe questionnaire comprised 3 sections. The first part comprised questions regarding demographic features. The second part comprised questions on how treatment plans change according to factors such as nature, location, number and size of the pulp exposure, and patients’ age. The third part composed of questions on the common materials and techniques used in DPC. To estimate the effect size, the risk ratio (RR) and 95% confidence interval (CI) were calculated using a meta-analysis software. ResultsA tendency toward more invasive treatment was observed for the clinical scenario with carious-exposed pulp (RR = 2.86, 95% CI: 2.46, 2.32; P < .001) as opposed to the clinical scenario with 2 pulp exposures (RR = 1.38, 95% CI: 1.24, 1.53; P < .001). Complete caries removal was significantly preferred to selective caries removal (RR = 4.59, 95% CI: 3.70, 5.69; P < .001). Among the capping materials, calcium silicate-based materials were preferred over calcium hydroxide-based materials (RR = 0.58, 95% CI: 0.44, 0.76; P < .05). ConclusionsWhile carious-exposed pulp is the most important factor in clinical decisions regarding DPC, the number of exposures has the least impact. Overall, complete caries removal was preferred over selective caries removal. In addition, the use of calcium silicate-based materials appears to have replaced calcium hydroxide-based materials.

The assessment of internal adaptation and fracture resistance of glass ionomer and resin-based restorative materials applied after different caries removal techniques in primary teeth: an in-vitro study.

The aim of this study was to evaluate the 3-dimensional (3D) internal adaptation (IA) and fracture resistance (FR) of compomer and glass ionomers applied after conventional caries removal to sound dentin (CCRSD) and selective caries removal to firm dentin (SCRFD) in in-vitro. Thirty extracted primary molars were randomly assigned to three main groups (n = 10) as glass hybrid restorative (GHR) (Equia Forte® HT), conventional glass ionomer (CGIR) (Voco Ionofil Molar) and compomer (Dyract XP). Each group was randomly divided into two subgroups according to caries removal technique as CCRSD (n = 5) and SCRFD (n = 5). The restoration procedures were completed after caries removal (CCRSD or SCRFD) in all samples. Then, specimens were subjected to IA and FR tests. Data were analyzed with Student's t, one-way ANOVA, and Kruskal Wallis-H tests. The correlation between IA and FR results was analyzed with a Pearson test. The statistical significance level was considered as 5%. While CCRSD showed superior IA results than SCRFD for all restorative materials (p < 0.05), no statistical difference was found between CCRSD and SCRFD in FR assessment (p > 0.05). In CCRSD, compomer showed superior results for IA and FR than glass ionomers (p < 0.05). In SCRFD, it was found no significant difference between the restoratives for IA (p > 0.05). However, compomer showed superior FR results than glass ionomers (p < 0.05). There was moderate negative correlation between internal voids and FR without statistically significant difference (r = -0.333, p = 0.072). Despite the advantages of SCRFD, it was found to be less superior than CCRSD in IA assessment. Therefore, when SCRFD is preferred, a peripheral seal should be provided for ideal restorative treatment. On the other hand, compomer mostly showed superior results compared to others.

Microbiological Assessment of Diode Laser in comparison to Chemical Disinfection with Selective Caries Removal

window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag("js", new Date()); gtag("config", "UA-72322659-1");

Minimally invasive selective caries removal: a clinical guide

An evolving understanding of the carious process, along with new research in adhesive restorative materials, has led to a more conservative, minimally invasive and biologically-based approach to managing dental carious lesions. The growing volume of literature has also demonstrated prognostic success in the selective caries excavation technique, subsequently preventing excessive tooth structure removal and injury to the dentine-pulp complex, which maintains pulp vitality and improves the long-term prognosis of the tooth. However, at present, there remains a limited volume of high-quality evidence to support selective caries removal, which subsequently could partly explain some resistance to its use in clinical practice. This clinical technique guide aims to demonstrate the management of carious lesions of moderate-to-deep depth in permanent teeth based on current minimally invasive dental literature.

Efficacy of antiseptics and chemomechanical methods for dentin caries lesions: A systematic review with GRADE approach.

Selective caries removal aims to remove carious tissue in deep dentin lesions. However, a discussion stands on the value of antiseptics and chemomechanical adjuvant methods to reduce the bacterial load on residual caries lesions. This systematic review has addressed two main clinical questions to compare the antimicrobial efficacy of available methods using (1) antiseptic or (2) chemomechanical agents before restoring dentin carious lesions. We included randomized and non-randomized controlled trials (RCTs/ NRCTs). We searched eight databases from inception to October 2021. Paired reviewers independently screened studies, extracted data, and assessed the risk of bias. The primary outcome was the reduction in the number of total bacterial in dentin, whereas secondary outcomes were reduction in the number of Lactobacillus and Streptococcus. We used the ratio of ratio of post-treatment to baseline means between two interventions in the logarithmic scale as a proper effect measure. Certainty of evidence was assessed with the Grading of Recommendations, Assessment, Development and Evaluation approach. We included 14 RCTs and 9 NRCTs, with nine interventions. Regardless the method, the number of bacteria at baseline was similar or exceeded that after the intervention, particularly in NRCTs. The evidence was inconclusive for most comparisons. Among antiseptic agents, chlorhexidine (CHX) resulted in an average of 1.14 times [95% confidence interval (CI): 1.08-1.21] more total bacterial than photodynamic therapy in RCTs. Among NRCTS, the natural agents resulted in five times more total bacterial than CHX (95% CI: 2-11). For chemomechanical methods, the control resulted in eight times (95% CI: 4-17) more total bacterial than Carisolv (SHAA). The certainty of the evidence was very low for all comparisons showing uncertainty whether one treatment could be more effective than another for dentin disinfection. So far, exclusively removing soft carious dentin would be enough to reduce the bacterial count.

In vitro antibacterial activity of green tea-loaded chitosan nanoparticles on caries-related microorganisms and dentin after Er:YAG laser caries removal.

This study aimed to determine the inhibitory effects of green tea (Gt), EGCG, and nanoformulations containing chitosan (Nchi) and chitosan+green tea (Nchi+Gt) against Streptococcus mutans and Lactobacillus casei. In addition, the antibacterial effect of nanoformulations was evaluated directly on dentin after the selective removal of carious lesion. At first, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against S. mutans and L. casei isolates were investigated. In parallel, dentin specimens were exposed to S. mutans to induce carious lesions. Soft dentin was selectively removed by Er:YAG laser (n=33) or bur (n=33). Remaining dentin was biomodified with Nchi (n=11) or Gt+Nchi (n=11). Control group (n=11) did not receive any treatment. Dentin scraps were collected at three time points. Microbiological analyses were conducted and evaluated by agar plate counts. Gt at 1:32 dilution inhibited S. mutans growth while 1:16 was efficient against L. casei. EGCG at 1:4 dilution completely inhibited S. mutans and L. casei growth. Independently of the association with Gt, Nchi completely inhibited S. mutans at 1:4 dilution. For L. casei, different concentrations of Nchi (1:32) and Nchi+Gt (1:8) were required to inhibit cell growth. After selective carious removal, viability of S. mutans decreased (p<0.001), without difference between bur and Er:YAG laser (p>0.05). Treatment with Nchi and Nchi+Gt did not influence the microbial load of S. mutans on dentin (p>0.05). Although variations in concentrations were noticed, all compounds showed antibacterial activity against S. mutans and L. casei. Both bur and Er:YAG laser have effectively removed soft dentin and reduced S. mutans counts. Nanoformulations did not promote any additional antibacterial effect in the remaining dentin.

Dentine Mineral Changes Induced by Polyalkenoate Cements after Different Selective Caries Removal Techniques: An in vitro Study

This study aimed at evaluating the mineral variation induced by polyalkenoate cements in residual dentine after different caries removal methods. Ten extracted sound molars were selected, and five cavities were prepared on the occlusal surface of each specimen. Carious lesions were generated using a microbial protocol, while the caries removal was performed using bur, hand excavator, or two papain-based chemo-mechanical agents. One cavity was left unexcavated in each tooth. Cavities were restored using a zinc polycarboxylate cement (ZPC; n = 25), or a glass ionomer cement (GIC) was used (n = 25). Subsequently, the specimens were stored under simulated pulpal pressure for 45 days. Micro-CT scanning was performed after caries formation, removal, and restoration. Cavity volumes (mm³) and mineral density (MD) changes were calculated. Remineralisation ability was investigated by scanning electron microscopy (SEM) and Fourier-transformed infrared spectroscopy (FTIR). Statistical analysis was performed (5% significance level). Baseline caries, cavity volume, and MD increase after caries removal were similar to all excavation groups (p > 0.05). MD was higher in ZPC compared to GIC (p < 0.05). SEM revealed that the chemo-mechanical techniques produced a smoother dentine surface compared to mechanical methods. FTIR showed silicon-based minerals in GIC-treated dentine, while ZPC-treated presented mineral deposits characterised by amorphous calcium phosphate. In both cases, the presence of carbonates was detected on dentine surfaces. All caries removal techniques performed similarly in terms of carious dentine excavation. ZPC can be used as dentine replacement material after caries removal as it may induce higher MD increase in residual dentine via deposition of calcium phosphates, compared to GIC.

Survival rate of the Hall technique compared with resin composite restoration in multi-surface cavities in primary teeth: a 1-year randomized clinical trial.

Hall technique (HT) has been indicated for teeth with dentinal caries lesion; however, extensive cavities, with more than two surfaces still seem challenging for restorative treatment in pediatric dentistry, resulting in a higher failure rate and an increased need for retreatment. To compare the survival rate of the Hall technique preformed metal crown (HT) with resin composite restoration (RC) for multi-surface cavitated caries lesions in primary molars. In this multicenter two-arm randomized clinical trial, children between 4 and 9 years of age with at least one primary molar with cavitated caries lesion involving more than two surfaces, including one buccal or palatal/lingual surface, were selected from 17 Brazilian cities. A total of 364 teeth were allocated into two groups: (1) teeth treated with selective caries removal and RC and (2) treated with the HT. The survival rate was assessed at 6 and 12 months after the interventions. Survival analysis was performed with the Kaplan‒Meier method. Cox regression was used to determine the influence of explanatory variables on the survival rate (α=5%). After 12 months, 292 teeth were re-evaluated. A total of 358 teeth were re-evaluated at least once during the study and included in the survival analysis. The HT (87.8%) resulted in a higher survival rate than RC restoration (75.7%) (p=0.004). HT has a higher survival rate than RC as a treatment for multi-surface cavitated caries lesions in primary teeth. ClinicalTrials.gov: NCT02782390.

Chapter 9.3: Current Concepts of Caries Removal in Daily Practice.

Although the discussion about the amount of carious dentin to be removed during cavity preparation is quite old, concepts for caries removal have evolved and changed considerably over the last decades. The antiquate understanding that it was necessary to eliminate the microbial contamination of a cavity before placing the restoration was replaced by the current knowledge that maintaining contaminated dentin beneath restorations is inevitable and is not associated with treatment failure. This chapter brings together the body of evidence behind carious dentin removal to indicate a conservative treatment, aiming to preserve both tooth vitality and structure. Studies that evaluated the effects of sealing contaminated dentin are described, which are focused on different outcomes, such as microbiological counts, clinical characteristics, laboratory analysis, and radiographic findings. Long-term studies and randomized clinical trials also support the current recommendations. After addressing the available literature on this topic, this chapter concludes that (1) the amount of carious dentin to be removed should be defined by lesion depth; (2) sealing and/or selective caries removal to firm dentin is recommended for the management of shallow and moderate lesions; (3) the selective caries removal to soft dentin in a single session is indicated for deep caries lesions aiming to preserve tooth vitality; and (4) the use of a cavity liner after selective caries removal seems to be an unnecessary clinical step.

Clinical dilemma of selective caries removal in primary teeth: a scoping review

Clinical dilemma of selective caries removal in primary teeth: a scoping review

Silver Diamine Fluoride as Indirect Pulp Capping Agent in Primary Molars: A Case Series

According to the current recommendations of the American Academy of Pediatric Dentistry (AAPD), Indirect Pulp Capping or Indirect Pulp Treatment (IPT) is defined as a procedure that preserves the deepest cavities adjacent to the pulp to prevent pulp exposure. Preserving and protecting the vital pulp through remineralisation of hypomineralised carious dentin poses a significant challenge in restorative dentistry. Traditionally, managing deep caries often led to pulp exposure and subsequent root canal treatment. Selective or stepwise caries removal is based on the concept of halting the progression of carious destruction, allowing for biological repair of the pulp-dentin complex by promoting the formation of tertiary dentin between temporary and definitive restorations. Silver Diamine Fluoride (SDF) has gained popularity due to its unique combination of silver and fluoride, which provides antimicrobial and remineralising properties. In this case series of three cases, three-year-old preschool boy, five year old girl and five year old girl, in whom, deep carious lesions in primary molars were treated using selective caries removal techniques with SDF as an IPT agent, resulting in successful minimally invasive restorative procedures. This case series underscores the importance of employing selective caries removal techniques and the potential use of SDF as an IPT agent in such scenarios to preserve tooth vitality in a less invasive therapeutic approach suitable for the pediatric population.

Assessment of 3D-Printed Tooth Containing Simulated Deep Caries Lesions for Practicing Selective Caries Removal: A Pilot Study.

A standard model for practicing caries removal skills is needed to support learners in managing deep carious lesions. The aim of the current study was to prepare 3D-printed teeth with added simulated carious layers and a pulpal structure. A first permanent mandibular containing occlusal (Class I) or proximal (Class II) cavities was printed. The teeth were then filled with wax and resin-modified glass ionomer cements mixed with a color modifier to simulate pulp and deep caries, respectively. Undergraduate dental students (n = 61) were asked to remove the caries using the selective caries removal (SCR) technique on the teeth. The students then completed a self-administered questionnaire to rate their caries removal experiences. One instructor then assessed the prepared teeth. Overall, the students provided positive feedback on the use of 3D-printed teeth; 72.1% agreed that the printed teeth provided a realistic model for practicing the SCR technique, 75.4% indicated that the new teeth were the appropriate choice for practicing the SCR technique, and 86.9% agreed that 3D-printed teeth should be used before treating real patients. More than half of the students had satisfactory outcomes in terms of the depth and caries removal aspects of the cavity preparation. These findings suggest that the developed 3D-printed teeth can potentially be adopted to practice caries removals in preclinical dental education.

Changes in Management Preference of Deep Carious Lesions and Exposed Pulps: Questionnaire Studies with a 10-Year Interval among Dentists in Lithuania

We aimed to investigate changes in management preferences for deep carious lesions and pulps exposed during carious tissue removal that occurred during the last 10 years and identify associated dentists’ background factors. The data were collected among dentists registered with the Lithuanian Dental Chamber at two time points using a similar questionnaire. In 2011, 400 randomly selected dentists received a questionnaire by mail, and 153 (38.3%) responded. In 2021, an electronic invitation to an online questionnaire was sent to all members of the Lithuanian Dental Chamber, and 213 (8.9%) dentists responded. The questionnaire included the definitions of management options, a radiograph, and a clinical picture of a deep carious lesion reaching to the inner fourth of dentine in a mature permanent tooth, asked management preferences in four different scenarios, as well as participants’ background characteristics, reasons for management, and procedural preferences. Data were analyzed using bivariate and multivariable analyses. Compared to 2011, participants in 2021 had 60% lower odds of preferring nonselective versus selective caries removal (OR 0.4, 95% CI 0.2–0.7) and endodontic treatment versus nonselective and selective caries removal (OR 0.4, 95% CI 0.2–0.6) in the scenario of asymptomatic and symptomatic (indicating reversible pulpitis at most) deep lesions, respectively. For exposed pulp, participants in 2021 had lower odds than in 2011 of preferring endodontic treatment versus vital pulp therapy (direct pulp capping and pulpotomies) for both scenarios without symptoms (OR 0.4, 95% CI 0.2–0.7) and with symptoms (OR 0.2, 95% CI 0.1–0.4). A higher proportion of respondents in 2021 reported using rubber dam (44% vs. 17% in 2011, p < 0.001) and hydraulic calcium silicate cements as a capping material (68% vs. 40% in 2011, p < 0.001). The management preferences were associated with the university of graduation and the number of years in dental practice, indicating “recommended in textbooks” and “recommended in scientific publications” as reasons for management preferences. To conclude, a change toward less invasive management options was observed. To a certain extent, dentists have implemented evidence-based recommendations in dental practice. To ensure further adoption of scientific evidence, dentists should be encouraged to update themselves on the newest evidence-based practices.

Clinical and radiographic evaluation of diode laser and chemical disinfection in comparison to selective caries removal in management of patients with deep carious lesions

Clinical and radiographic evaluation of diode laser and chemical disinfection in comparison to selective caries removal in management of patients with deep carious lesions

Deep caries removal strategies: Findings from The National Dental Practice-Based Research Network

BackgroundThe International Caries Consensus Collaboration (ICCC) has published recommendations on carious tissue removal to treat cavitated carious lesions in a manner that preserves hard tissue and retains teeth long term. This study quantifies The National Dental Practice-Based Research Network dentists’ use of selective caries removal. MethodsThis cross-sectional questionnaire study assessed reported use of selective caries removal when treating deep caries in asymptomatic and symptomatic teeth in response to clinical case scenarios. Statistical methods included the proportion of respondents concordant with ICCC guidelines at various thresholds and logistic regression to model factors associated with concordance. ResultsA total of 500 dentists responded. The study sample was 57% male, mean (SD) age was 50.9 (12.6) years, and 60% worked in private practice settings. Higher levels of concordance for choosing selective caries removal 50% or greater of the time were found for asymptomatic (62.4%; 95% CI, 57.6 to 67.2) than for symptomatic caries (49.3%; 95% CI, 44.4 to 54.2). These differences were significantly associated with type of practice setting. ConclusionsThe National Dental Practice-Based Research Network dentists reported using selective caries removal strategies when managing deep carious lesions more often than in previous US and Japanese practice-based research network studies and from results of a systematic review and meta-analysis. Nonetheless, substantive discordance with the ICCC guidelines was seen by the authors of this study. Practical ImplicationsMore dissemination and continuing education activities, as well as implementation studies, may further encourage use of selective caries removal to soft or firm dentin when indicated.

COVID-19 as an opportunity for minimally-invasive dentistry: a national cross-sectional survey

BackgroundDuring the COVID19 pandemic, the Latvian government issued first absolute restrictions (elective treatments prohibited, only emergency care) and later relative restrictions (preference for non-aerosol-generating procedures (AGP) and emergency care) on dental care. This study aims to assess the impact of these restrictions on the decision made by Latvian dentists about caries treatment.MethodsA Survey-based cross-sectional study was used. A minimum sample size of 174 dentists was estimated for national representativeness (N = 1524). The questionnaire was developed by experts and sent three times via email to Latvian dentists from July to September 2020 and was also delivered in printed form at two national conferences in September and October 2020. Descriptive statistics were calculated.ResultsWe received 373 completed questionnaires, with a total response rate of 24.5%. Under the recommendation to reduce AGP for the treatment of uncomplicated caries, 10% of the dentists stated that they would stop attending, 54% would only attend emergencies, and 36% would attend as usual. Under prohibition, the percentages are 15%, 74%, and 11%, respectively. Regarding the type of treatment, more than 75% would opt to proceed with selective caries removal for both primary and permanent teeth and 10% for extraction.ConclusionLatvian dentists are willing to treat patients with caries during the pandemic and state that they prefer to use non- or minimally invasive and less aerosol-generating methods for caries treatment.

Outcomes reporting in systematic reviews on vital pulp treatment: A scoping review for the development of a core outcome set.

BackgroundA large number of research reports on vital pulp treatment (VPT) has been published over the last two decades. However, heterogeneity in reporting outcomes of VPT is a significant challenge for evidence synthesis and clinical decision‐making.ObjectivesTo identify outcomes assessed in VPT studies and to evaluate how and when outcomes are measured. A subsidiary aim was to assess evidence for selective reporting bias in the included studies. The results of this review will be used to inform the development of a core outcome set (COS) for endodontic treatments.MethodsMultiple healthcare bibliographic databases, including PubMed/MEDLINE, Ovid EMBASE, Scopus, Cochrane Database of Systematic Reviews and Web of Science were searched for systematic reviews published between 1990 and 2020, reporting on VPT. Screening, data extraction and risk of bias assessment were completed independently by two reviewers. Outcomes' information was extracted and aligned with a healthcare taxonomy into five core areas: survival, clinical/physiological changes, life impact, resource use and adverse events.ResultsThirty‐six systematic reviews were included, 10 reporting on indirect pulp capping or selective caries removal, nine on direct pulp capping, eight on pulpotomy and nine on combined VPTs. There was considerable variation in the outcomes reported in these reviews and their included studies. Clinician‐reported outcomes were used considerably more often than patient‐reported outcomes. A range of instruments and time points were used for measuring outcomes. Several of the reviews were assessed as having low risk of selective reporting bias, but many did not specifically report this domain, whilst others did not provide risk of bias assessment at all.DiscussionConsiderable variation in selection of outcomes and how and when they are measured and reported was evident, and this heterogeneity has implications for evidence synthesis and clinical decision‐making.ConclusionsWhilst there is a lack of consistency, several potentially important outcomes for VPT, including pulp survival, incidence of post‐operative pain and need for further intervention, have been identified which could inform the development of a COS for endodontic treatment.RegistrationCore Outcome Measures in Effectiveness Trials (COMET) (No. 1879).

Preclinical 3D-printed laboratory simulation of deep caries and the exposed pulp reduced student anxiety and stress, while increasing confidence and knowledge in vital pulp treatment.

AimTo evaluate the impact of a preclinical laboratory session using 3D printed teeth on dental student stress, anxiety, confidence and knowledge when treating deep caries and pulp exposure.MethodologyThis was a two‐centre controlled study, with randomized distribution of students into two groups: a vital pulp treatment (VPT) lecture‐only (control) group and a VPT‐lecture combined with a VPT‐laboratory (experimental) group. In both universities, preclinical students with endodontic or operative dentistry laboratory sessions could participate. All students were invited to the lecture. Two weeks later (timepoint‐T1), both groups completed validated and bespoke questionnaires and scales to evaluate their stress (Stress‐VAS), anxiety (STAI Trait [T] and State [S]), self‐confidence and knowledge. Thereafter, only the experimental group attended the hands‐on laboratory session demonstrating the techniques of selective caries removal and partial pulpotomy on a commercial 3D‐printed tooth. Two weeks later (timepoint‐T2), the participants from both groups repopulated the same questionnaires and VAS. The control group had the laboratory session after the completion of the study. The statistical analysis was performed with Statistica® (significance p = .05). The homogeneity between the two samples was checked by Khi2 and Student tests. Stress‐VAS, STAI‐S, confidence and knowledge scores were compared within each group, and between the two groups, at T1 and T2, with a repeated measures anova test (+/−Tukey post‐hoc test).ResultsThe groups comprised 54 students each, with no statistical difference between the groups regarding demographic, academic data and STAI‐T score. The two groups had no significant difference of Stress‐VAS, STAI‐S, confidence and knowledge scores at T1 while they presented a significant difference in stress, anxiety and confidence scores at T2, but with no significant difference in knowledge score. However, knowledge score, as other parameters, improved significantly between T1 and T2 in the experimental group.ConclusionsThe addition of a laboratory session using 3D‐printed teeth that simulated deep caries and pulp exposure management, significantly reduced the stress and anxiety of students and increased their confidence. Within the limitations of this study, the benefit of introducing new technology in increasing student confidence and reducing stress offers opportunity for educational improvement in the VPT and cariology areas.