Seismic Analysis Of Structures Research Articles

Seismic mitigation analysis of three-dimensional base-isolated nuclear structures with soil-dependent isolation system under extreme earthquakes

The Fukushima nuclear accident in March 2011 has raised more stringent requirements for the ability of nuclear power plants (NPPs) to withstand extreme disasters such as extreme earthquakes. To address this challenge, this study proposed a new hybrid multi-dimensional passive control system that combines three-dimensional base isolation and geotechnical seismic isolation. In this system, high-damper rubber bearings were employed to isolate horizontal seismic motions, whereas disc springs, accounting for frictional forces, were used to mitigate vertical seismic motions. Additionally, a geotechnical seismic isolation system arranged under the base mat was leveraged to further reduce the seismic response of the superstructure. Taking a large-scale reactor building in complex layered sites as an example, the effectiveness of the hybrid multi-dimensional isolation system was studied using a wave motion method. The research results indicate that when subjected to extreme earthquakes, hybrid multi-dimensional isolation exhibits superior isolation performance compared with three-dimensional base isolation, which can significantly reduce the three-dimensional dynamic response of nuclear structures without increasing the displacement of the isolation bearings. The proposed hybrid multi-dimensional isolation system offers an effective solution to the challenges faced by three-dimensional isolation systems, thereby enhancing the seismic resistance of nuclear structures against extreme earthquakes.

Seismic resistance analysis of a plywood house structure based on ABAQUS fracture mechanics

Plywood is a more affordable material for the residential construction industry due to its lower cost and easy availability. However, earthquakes are the biggest barrier for wood structures to stand for a long time, as the materials can easily deform or collapse when subjected to seismic forces. This paper aims to explore the performance of plywood structures during an active earthquake by conducting a series of tests and simulations. In this study, plywood property was explored in the four-point bending experiment to determine its stress-strain relationship, and the results were used to identify the materials young modulus, a key parameter for designing more resilient structures. In addition, a finite element model of a plywood house structure was developed in the ABAQUS application, and the seismic movements with five different velocity values were applied to determine the stress distribution and deflections of the structure. The results provide insights into the dynamic behavior of plywood structures under different seismic movements.

Research on the Value of Rayleigh Damping Parameter in Explicit and Implicit Integrals for Dynamic Analysis of Large Structures

Rayleigh damping is proportional to the combination of the structural mass matrix and stiffness matrix and is widely used in structural seismic analysis. The accuracy of seismic analysis of nuclear power structures directly depends on the value of the Rayleigh damping parameters. However, the stiffness component of Rayleigh damping is not included in the explicit integral, so the Rayleigh damping in the explicit and implicit integrals needs to be handled differently. LS-DYNA R11.1.0 software provides various calculation methods for the value of the Rayleigh damping parameter in the explicit integral. To investigate the influence of the value of the Rayleigh damping parameter in the explicit and implicit integrals on the results of the dynamic analysis of a nuclear power plant, the AP1000 nuclear island plant is taken as an example, and the explicit and implicit dynamic calculation are carried out respectively for the nuclear power plant, considering the soil–structure interaction. The results show that the Rayleigh damping parameter calculated by different methods in the explicit integral has a large influence on the results of seismic analysis of nuclear power plants. The mass component of Rayleigh damping in the explicit and implicit integrals takes the same value, and the stiffness component of Rayleigh damping in the explicit integrals is taken as the negative of the stiffness component in the implicit integrals. Thus, the results of the two dynamic analyses can be in good agreement. The results provide a reference for the application of Rayleigh damping in the explicit integral for the seismic analysis of nuclear power structures.

Seismic Mitigation Analysis of Base-isolated Structure with Sliding Magnetic Bearings Considering Local-Site Conditions

Base-isolation systems applied in building structures and infrastructures often suffer from damage even failure during strong earthquakes. The adaptability of isolators to local sites is a main concern for the robust design of base-isolation systems. In this study, seismic mitigation analysis of base-isolated structure with newly-developed sliding hydro-magnetic bearing (HMB) and sliding implant-magnetic bearing (IMB) considering local-site conditions is carried out. Extension of modeling of sliding magnetic bearings is first conducted based on the data of shaking-table tests of a reduced-scale base-isolated structure. To assess the instantaneous frequency for quantifying sliding magnetic bearings’ resisting force, the Hilbert–Huang transform (HHT) is applied. The influences of local-site conditions upon mitigation performance of the sliding magnetic bearings are then addressed, including far-field and near-field, ground motions with and without velocity pulses, and hard-soil and soft-soil. For comparison purposes, the seismic mitigation analysis of the base-isolated structure attached with lead rubber bearing (LRB) and curved surface slider (CSS) is carried out as well. Numerical results show that the sliding magnetic bearings outperform the state-of-the-art seismic isolators in both seismic mitigation and deformation constraint, and the IMB has excellent applicability for engineering since its perfect adaptability to local sites. However, the LRB cannot achieve the desired seismic mitigation under near-field pulse-like ground motions.

A direct analytical derivation of the multi-dimensional fragility spaces of structures under nonstationary mainshock-multi-aftershock sequences

Performance-based earthquake engineering (PBEE) is a popular direction in the earthquake community, and at this stage, risk-based PBEE has become mainstream. In the risk-based probabilistic framework, seismic fragility analysis constitutes the most important link, and corresponding research on the mainshock-aftershock sequence has received widespread attention in recent years. Since a mainshock is often accompanied by multiple aftershocks and there is great uncertainty in the vibration characteristics of aftershocks, a seismic fragility analysis of structures under a stochastic mainshock-multi-aftershock sequence is meaningful and necessary. The corresponding questions, such as how to derive the multi-dimensional analytical fragility form under a stochastic mainshock-multi-aftershock sequence and how to correlate multiple intensity measures with multiple demand parameters, still require further investigation. In this paper, a direct analytical derivation of the multi-dimensional seismic fragility spaces of structures under nonstationary stochastic mainshock-multi-aftershock sequences is introduced. The methodology framework, implementation steps, and application examples are also provided in detail. Moreover, two scenarios, the one-mainshock-one-aftershock and one-mainshock-two-aftershocks, are considered, and the obtained multi-dimensional analytical fragility spaces for both scenarios are validated. In general, the matching accuracy of the fragility results for both scenarios is proven to be high, and the direct analytical derivation of the multi-dimensional fragility spaces is validated to be ideally consistent, which further provides a reference for multi-dimensional risk analysis under nonstationary stochastic mainshock-multi-aftershock sequences in future work.

Effect of Earthquake-Induced Structural Pounding on the Floor Accelerations and Floor Response Spectra of Adjacent Building Structures

The influence of earthquake-induced structural pounding among buildings is paramount in the seismic analysis and design of structures. The recognition of such a phenomenon has been growing in the last decades. The search for ways to understand and mitigate the consequences of these structural collisions in building structures is the primary goal of the investigation of earthquake-induced building pounding. This phenomenon is known for increasing the floor accelerations, mainly where pounding occurs, implying significant local damage. These collisions cause short-duration acceleration pulses that may compromise the building structure and the non-structural elements within the building’s stories. Non-structural elements supported by the structure’s floors under earthquake-induced pounding instances may present a risk to human lives and/or human activity. Hence, the influence of earthquake-induced pounding in the floor response spectra of two adjacent reinforced concrete structures with inelastic behavior is assessed by varying the number of stories and their separation distance. Pounding greatly influenced the floor acceleration spectra, increasing the spread of accelerations over a broader period range, particularly exciting low to moderate periods of vibration.

Study on seismic fragility of prefabricated columns connected by grouted sleeves based on IDA method

PurposePrefabricated columns connected by grouted sleeves are increasingly used in practical projects. However, seismic fragility analyses of such structures are rarely conducted. Seismic fragility analysis has an important role in seismic hazard evaluation. In this paper, the seismic fragility of sleeve connected prefabricated column is analyzed.Design/methodology/approachA model for predicting the seismic demand on sleeve connected prefabricated columns has been created by incorporating engineering demand parameters (EDP) and probabilities of seismic failure. The incremental dynamics analysis (IDA) curve clusters of this type of column were obtained using finite element analysis. The seismic fragility curve is obtained by regression of Exponential and Logical Function Model.FindingsThe IDA curve cluster gradually increased the dispersion after a peak ground acceleration (PGA) of 0.3 g was reached. For both columns, the relative displacement of the top of the column significantly changed after reaching 50 mm. The seismic fragility of the prefabricated column with the sleeve placed in the cap (SPCA) was inadequate.Originality/valueThe sleeve was placed in the column to overcome the seismic fragility of prefabricated columns effectively. In practical engineering, it is advisable to utilize these columns in regions susceptible to earthquakes and characterized by high seismic intensity levels in order to mitigate the risk of structural damage resulting from ground motion.

Seismic performance analysis of building structures using high damping rubber bearings

Seismic performance analysis of building structures using high damping rubber bearings

A response‐compatible ground motion generation method using physics‐guided neural networks

AbstractSelecting or generating ground motions (GMs) that elicit seismic responses matching specific standards or expected benchmarks for nonlinear time‐history analysis (NLTHA) is crucial for ensuring the rationality of structural seismic design and analysis. Typical GM inputs for NLTHA, either natural or artificial, are normally spectrum‐compatible, which may produce significant variations in analysis results, even using multiple GMs. This paper introduces a response‐compatible ground motion generation (RCGMG) method for generating GMs that are tailored to be response‐compatible. NLTHA results using only a few of these artificial GMs can closely approximate the mean responses from a large set of natural spectrum‐compatible GMs or target responses. The RCGMG method adopts the response diagram in the time domain (RDTD) to characterize the nonstationary features of GMs and their impacts on structural dynamic responses. A physics‐guided conditional generative adversarial network is developed to produce artificial RDTDs with features and impacts of RDTDs of natural GMs. These generated RDTDs are then mapped into response‐compatible GMs through a feedforward neural network. To verify the effectiveness of RCGMG, NLTHA of different structure models under various site conditions and target spectra is conducted. Seismic responses of NLTHA using RCGMG‐generated GMs are compared with responses from spectrum‐compatible natural GMs. The results demonstrate that responses from RCGMG GMs are closer to the target responses, with fewer GM inputs and robust generalization performance.

Study on Seismic Mechanical Properties of Reinforced Concrete Energy Dissipation Wall and Seismic Response Analysis of Structure

Utilizing the nonlinear finite element analysis software, ABAQUS, an examination is undertaken to evaluate the ductility characteristics and seismic design methodologies pertinent to a representative reinforced concrete hollow high pier. The research encompasses several focal areas: elucidation of seismic design strategies related to ductility categories, exploration of plastic energy dissipation mechanisms, determination of ductility indices, and delineation of structural measures to enhance ductility. Employing the nonlinear FEA software, ABAQUS, it is recommended that the longitudinal reinforcement ratio for ductile piers fall within the range of 0.6% to 4%. Furthermore, for flexible bridge piers, the maximum spacing of confinement reinforcements should either exceed 100 mm, be sixfold the diameter of the longitudinal reinforcement, or equate to at least one-quarter of the pier column’s bending direction section width. Combined with the influence of high pier ductility seismic axial pressure ratio, reinforcement, concrete factors such as factor analysis results, put forward and checking a reinforced concrete hollow high pier ductility seismic optimization scheme, increase the strength of the plastic hinge area section, through the comparative analysis in different seismic strength of plastic hinge unit cloth, maximum ductility coefficient and pier top displacement to verify its influence on the ductile seismic.

Progressive Collapse Analysis of Single-Layer Latticed Domes Under Seismic Loading Using Enhanced Fiber-Based Approach

This paper presents a novel computational framework based on the Finite Particle Method (FPM) for the progressive collapse analysis of single-layer latticed domes subjected to seismic loading. The framework integrates a fiber-based approach to simulate the nonlinear behavior of steel structural members, including yielding, cyclic buckling, and fracture. For structural seismic analysis, the fiber-based approach is enhanced by incorporating a dynamic increase factor, which accounts for the impact of high strain rates during seismic events. Furthermore, the framework extends the pseudo-dynamical stiffness of the particle to consider Rayleigh damping, surpassing the limitations of the original mass damping model. The computational efficiency of the proposed framework is optimized by implementing it on a generic parallelized GPU platform. The computational framework has the advantage of elaborately simulating the response of individual structural members while efficiently capturing the complex behavior of the overall structure. Subsequently, the effectiveness of the enhanced framework is demonstrated through the analysis of the collapse behavior of a representative single-layer latticed dome under seismic loading. The study conducts a parametric analysis to evaluate the influence of two key factors, namely, rise-to-span ratios and imperfections, on the collapse behaviors. The findings contribute to a better understanding of the complex behaviors of single-layer latticed domes during seismic events, providing knowledge for improving structural safety and resilience in public buildings.

Seismic Safety Analysis of Dam Appurtenant Structures in Northern Thailand

Seismic Safety Analysis of Dam Appurtenant Structures in Northern Thailand

Sustainable Seismic Performance of Diagrid Core-Tube Structure with Replaceable Steel Coupling Beam

The diagrid core-tube structure has been widely used in high-rise buildings in recent years, but there are few studies on the sustainable energy dissipation measures and seismic performance improvement of such structural systems. Because the coupling beam is the element connecting the inner tube and the outer tube in the diagrid structure, it is the first seismic defense line and an important energy-dissipation member in the seismic design of the overall structure. Therefore, this paper replaces the traditional reinforced concrete coupling beam of the inner tube of the shear wall with a replaceable energy-dissipation steel coupling beam, and the strength, stiffness, and stability of the replaceable steel coupling beam are designed to improve the sustainability of the structure. By changing the position of the replaceable coupling beam, the relative stiffness of the inner and outer tubes of the diagrid tube structure, and the plane form of the structure, the static elastoplastic analysis and seismic response energy analysis of different diagrid tube structures are carried out, and the influence of the replaceable coupling beam on the sustainable seismic performance of the diagrid tube structure is studied. The results show that the replaceable coupling beams have little effect on the ultimate bearing capacity of the structure, but the ductility and sustainability of the structure are significantly improved, and the whole building layout is the optimal layout scheme. The setting of replaceable coupling beams makes the diagrid tube structure show hysteretic energy-dissipation earlier under the action of large earthquakes, and the proportion of hysteretic energy-dissipation is greatly improved, which reduces the inter-story drift ratios and the damage degree of the diagrid columns under the action of large earthquakes. When the relative stiffness of the outer tube of the diagrid tube structure is small or the plane form of the structure is a regular quadrilateral, the application of replaceable coupling beams is more effective in improving the ductility and sustainability of the structure and reducing the damage to the diagrid column under large earthquakes.

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Structure under Main–Aftershock Earthquake Sequences

Earthquakes are often followed by higher-intensity aftershocks, which tend to aggravate the accumulated and more severe damage to building structures. The seismic vulnerability of concrete-filled steel tube (CFST) structures under major aftershocks is more complex. In this paper, a CFST frame and a frame with buckling-restrained braces (BRBs) are studied, and the finite element analysis software Midas 2022 is used to analyze the seismic vulnerability of the two types of structures under main shock and main–aftershock. The results show that the structural vulnerability of the two structures is significantly higher under the main–aftershock sequences than under the main shock alone. Compared with the CFST structure, the structure with BRBs can effectively reduce the structural displacement and the hysteretic energy, decrease the plastic deformation risk of the structural components, and improve the seismic performance. The structure with BRBs can significantly reduce the probability of structural collapse under the main–aftershock sequence and can provide a reliable guarantee of the stability of the building.

Performance evaluation of a seismic strengthening applied on a masonry school building by dynamic analyses

With its unreinforced masonry structural system, Münevver Şefik Fergar Primary School has been analyzed and retrofitted by the Istanbul Project Coordination Unit, IPKB in Istanbul. The applied strengthening is mainly composed of the addition of reinforced concrete layers to the masonry walls by shotcreting. This study is performed to monitor the variation of the dynamic properties of the building through the constructional works and evaluate the effects of the performed retrofitting. For this aim, six sets of operational modal analysis type dynamic identification, starting from the original building and ending with the retrofitted building, were performed to extract the dynamic properties of the building. To discuss the effectiveness of retrofitting efficiently, numerical analyses have also been conducted. The original and retrofitted form of the building has been modeled by finite element modeling technique and Eigenvalue analyses were performed to obtain the dynamic properties of the building numerically for both phases. The comparison of the dynamic characteristics of the original and retrofitted building enabled the assessment of the efficiency of the applied seismic strengthening. Moreover, the experimentally and numerically obtained results were compared. It is seen that, while both experimental and numerical results proved the effectiveness of the performed retrofitting to increase the dominant frequencies of the building, the difference in their quantity was worth noting and should be accounted for seismic analysis of similar structures.

Endurance time analysis for seismic performance of underground structures subjected to mainshock–aftershock sequences

The seismic response analysis of subway underground structures only considers the impact of a single mainshock, ignoring the aftershocks, which may cause more serious secondary damage within a short time after strong earthquakes. To investigate the seismic performance of underground structures under sequential earthquakes and improve the understanding of aftershocks, we analyzed the dynamic response of subway station structures under mainshock–aftershock sequences. A typical two-story and three-span subway station was selected as the prototype, and a finite element model of a soil–underground structure interaction was established. Based on the basic concept of endurance time and design response spectrum of relevant seismic standards in China, an endurance time acceleration function was generated, and nine mainshock–aftershock sequences were constructed. Thereafter, the seismic responses of subway stations under the action of mainshock–aftershock sequences, such as lateral deformation characteristics and damage failure law, were discussed and analyzed. The results show that the endurance time method can be used as a new and efficient method to study the seismic performance of underground structures subjected to mainshock–aftershock sequences. The effects of aftershocks on the damage and lateral displacement of underground structures were preliminarily revealed. The structural deformation response of each layer varies greatly due to the different damage states of the mainshock. The maximum story drift θ of the structure increases with the increase of loading seismic intensity. From the perspective of seismic damage and relative deformation, the structural dynamic response, considering the effect of sequential earthquakes, is greater than that of the mainshock alone, which reflects the disadvantage of aftershocks in seismic design. The results provide a reference for seismic analysis and damage assessment of structures under sequential earthquakes.

Seismic analyses of single-layer dome structures with random geometrical imperfections under stochastic ground motions

In this paper, seismic analyses of single-layer dome structures are carried out, with a particular emphasis on the incorporation of randomness in both geometrical imperfections and ground motions. First, the paper introduces models for random geometrical imperfections and stochastic ground motions, employing the Stochastic Imperfection Mode Superposition Method (SIMSM) for imperfections and utilizing the Spectral Representation Method (SRM) for ground motions. These models are designed to comprehensively account for the inherent uncertainties in real-world structural behavior. Subsequently, the Probability Density Evolution Method (PDEM) is applied to investigate the probabilistic response and seismic reliability of dome structures, which allows for a detailed examination of key performance indicators, such as displacement, plastic ratio, and strength damage, under the influence of random factors. Both deterministic and stochastic analyses are conducted to gain insights into the impact of randomness in geometrical imperfections and ground motions. The computational results unveil a crucial finding: an unfavorable distribution of imperfections can significantly compromise the dynamic performance and safety of single-layer dome structures. Furthermore, the paper delves into parametric analyses, with a specific focus on imperfection amplitude, the rise-span ratio and roof load as pivotal parameters. These analyses provide valuable insights into the sensitivity of the structural response to variations in these critical design factors.

Lifetime seismic fragility analysis of long-span spatial structures considering the wind-induced fatigue effect

Long-span spatial structures are susceptible to cumulative fatigue damage over their lifespan due to prolonged exposure to wind loads. The degradation in material properties resulting from fatigue can impact the structure's performance to resist earthquakes. However, previous studies and current design specifications do not address the issue of wind-induced fatigue in long-span spatial structures, making it difficult to evaluate the multihazard risk of the facilities under the combined action of fatigue and earthquakes. In this study, an assessment framework for the lifetime multihazard fragility of long-span spatial structures subjected to fatigue and earthquakes is developed to address this issue. The innovation of the proposed wind-induced fatigue analysis is that the influence of wind direction can be considered. Multihazard fragility surfaces are established with a mixed exponential model to assess the seismic fragility of the structure with different service times. The proposed method is applied to the seismic analysis of a typical single-layer Kiewitt-8 reticulated dome (SK8RD) to verify its feasibility. The results demonstrate that after 47 years of service, the ultimate bearing capacity of SK8RD decreases by 45.5% due to the wind-induced fatigue, while its collapse probability increases by 25.3% under the seismic action. Neglecting wind direction randomness and focusing solely on a single direction can lead to an overestimation of wind fatigue damage by more than twofold. Utilizing the probabilistic multihazard demand model based on the mixed exponential function enhances the regression accuracy by 12.9%, facilitating a more precise assessment of multihazard fragility for the SK8RD subjected to seismic and long-term wind fatigue. The proposed framework offers a valuable tool for evaluating multihazard risk considering the wind-induced fatigue for in-service long-span spatial structures.

Seismic fragility analysis of structures via an Adaptive Gaussian Mixture Model and its application to resilience assessment

Seismic fragility analysis and seismic resilience assessment are pivotal tasks within the performance-based earthquake engineering framework. The former aims to quantitatively assess the probability of engineering structures sustaining various degrees of damage when subjected to earthquakes of varying intensity levels. In contrast to many traditional seismic fragility methods, this paper introduces a precise and versatile approach grounded in reliability analysis, with the goal of eliminating the restrictive lognormal assumption. Initially, the proposed method involves conducting seismic reliability analysis of structures using the Fractional Exponential Moments-based Maximum Entropy Method (FEM-MEM). This approach efficiently yields failure probabilities. Subsequently, an Adaptive Gaussian Mixture Model (AGMM) is presented for fitting a set of failure probability points, producing comprehensive and continuous seismic fragility curves. Notably, AGMM offers remarkable flexibility in modeling fragility curves, ensuring precise estimations for subsequent resilience assessments. Building upon the results of the fragility analysis, the paper proceeds to assess the seismic resilience of structures. The proposed method’s feasibility and effectiveness are validated through two illustrative numerical examples. The results demonstrate that, in comparison to the conventional lognormal assumption, the proposed method offers superior accuracy and broader applicability for conducting seismic fragility analyses of structures.

Depositional pattern and source-to-sink process of submarine fans in Lingshui and Sanya formations, Baodao Sag, Qiongdongnan Basin, China

The deepwater area is one of the frontiers of oil and gas exploration, with the understanding of distribution and genesis of deepwater reservoirs being crucial for reservoir formation research. Despite Baodao Sag in the Qiongdongnan Basin being proven to be rich in hydrocarbon generation, significant oil and gas fields have yet to be discovered in the ultra-deepwater areas, and the distribution patterns of reservoirs in deep water remain unclear. Taking the southern slope area of the Baodao Sag as an example, the distribution characteristics of submarine fans are studied by employing seismic prediction methods, including seismic reflection structure analysis, seismic facies geometry, seismic attribute analysis, and the source-to-sink theory. The results show distinct characteristics: the fan delta exhibits parallel oblique progradational reflection, the slumping submarine fan displays lenticular reflection, and the submarine fan of the Sanya Formation demonstrates subparallel sheet reflection. The provenance of sediment is traced back to the denudation area of the Songnan low uplift and the Southern Uplift area in the southwest. The sediments were primarily transported through two main incised channel systems in the north and south, ultimately flowing into the southern slope area of the Baodao Sag. The application of seismic sedimentological prediction methods and source-sink theory has laid a solid geological foundation for oil and gas exploration and the analysis of reservoir forming conditions in the deepwater area of the Baodao Sag.