Segmented High-purity Germanium Detectors Research Articles

Lung counting with a highly segmented HPGe detector

A highly segmented High-Purity Germanium (HPGe) detector was used to measure 241Am activity located inside the lungs of an anthropomorphic phantom with various active and passive shield configurations. It was found that the background suppression shield does not play a significant role in reducing the Minimum Detectable Activity (MDA) after veto, based on the segmentation in the depth direction of the HPGe, when measuring low-energy gamma rays. A reduction of up to 57% in the MDA was achieved. The MDA could be further improved by a thinner lateral segmentation and an optimized anti-Compton shield coupled with an active or passive backplate. The new detector application would be particularly useful in mobile whole-body counting units, where the natural background radiation poses a challenge when measuring low-energy gamma rays.

Improving the detection limit in lung counting with a segmented HPGe detector

A segmented High-Purity Germanium (HPGe) detector with a thin front segment together with various active and passive shield configurations was simulated with the aim of reducing the level of background events in lung counting applications. Eight different detector models were tested in a Geant4 simulation environment in a scenario where inhaled 241Am activity was deposited in the lungs of an ICRP adult reference computational phantom. In lung counting measurements, the Compton continuum in the spectrum is generated by the natural and man-made radionuclides inside the human body and the natural background radiation from the environment. The reduction in Minimum Detectable Activity (MDA) using the segmented HPGe detector combined with an active shield compared to a model with a single germanium crystal was investigated. A reduction in MDA up to 30% and 66% was obtained for internal and external sources, respectively. The results show that the detection limit and/or the measurement time in lung counting can be reduced using such a detector configuration. Furthermore, combining the segmented HPGe detector with an active shield would be particularly useful in field measurements.

First Experimental Demonstration of the Use of a Novel Planar Segmented HPGe Detector for Gamma Emission Tomography of Mockup Fuel Rods

Postirradiation examination of nuclear fuel is routinely performed to characterize the important properties of current and future fuel. Gamma emission tomography is a proven noninvasive technique for this purpose. Among various measurement elements of the technique, a gamma-ray detector is an important element whose spectroscopic abilities and detection efficiency affect the overall results. Finding a combination of high detection efficiency and excellent energy resolution in a single detector is often a challenge. We have designed a novel planar segmented high-purity germanium detector that offers simultaneous measurement in six lines of sight with excellent energy resolution. The simultaneous detection ability enables faster data acquisition in a tomographic measurement, which may facilitate achieving higher spatial resolution. In this work, we have demonstrated the first use of the detector by performing a full tomographic measurement of mockup fuel rods. Two methods of detector data analysis were used to make spectra, and the images (tomograms) were reconstructed using the filtered back projection algorithm. The reconstructed images validate the successful use of the detector for tomographic measurement. The use of the detector for real fuel measurement is being planned and will be performed in the near future.

Agata detector technology: recent progress and future developments

gamma -ray tracking is based on a new generation of position sensitive high-purity germanium (HPGe) detectors. A novel type of cluster detector was successfully developed and assembled for the high-resolution gamma -ray spectrometer Advanced Gamma Tracking Array AGATA. The core part of the detector consists of three encapsulated, 36-fold segmented HPGe detectors which are operated in a common cryostat. The Ge crystal is hermetically sealed inside an aluminium can. All energy channels provide best energy resolution of core and segment signals for an extended energy range well above 50 MeV. A low cross-talk level was determined for the HPGe detectors and its preamplifier circuitry. Related cross-talk corrections are essential for highest energy resolution and improved position dependent pulse shape information. Recently a new encapsulation technology was put into operation which is based on a renewable metal elastic seal. HPGe detector developments are concerned with technologies for the production of p+ and n+ contacts, the segmentation and passivation of encapsulated HPGe crystals. Semiconductor processing research specifically aimed to develop a stable, thin and easy to segment n+ contact. A novel process, based on pulsed laser melting PLM, was successfully employed to produce very thin n+ and p+ contacts preserving the Ge purity. The contacts were segmented using a photolithographic process and then the intrinsic surface between contacts was passivated to assure the electrical insulation between them. A small detector prototype with three segments was made using these new techniques and then successfully tested.

Calculation of Spatial Response of a Collimated Segmented HPGe Detector for Gamma Emission Tomography by MCNP Simulations

We have proposed a planar electronically segmented high-purity germanium (HPGe) detector concept in combination with a multislit collimator for gamma emission tomography. In this work, the spatial resolution achievable using the collimated segmented HPGe detector was evaluated, prior to the manufacture and operation of the detector. The spatial response of a collimated segmented HPGe detector concept was evaluated using simulations performed with Monte Carlo N-Particle (MCNP) transport code MCNP6. The full detector and multislit collimator system were modeled, and for the quantification of the spatial response, the modulation transfer function (MTF) was chosen as a performance metric. The MTF curve was obtained through the calculation of the line spread function (LSF) by analyzing the simulated projection data. In addition, tomographic reconstructions of the simulated simplified test objects were made to demonstrate the performance of the segmented HPGe detector in planned application. For 662-keV photons, the spatial resolution obtained was approximately the same as the collimator slit width for both the 100- and 150-mm-long collimators. The corresponding spatial resolution at 1596-keV photon energy was almost twice the slit width for the 100-mm collimator, due to the partial penetration of the high-energy gamma rays through the collimator bulk. For a 150-mm-long collimator, an improved resolution was obtained.

Geometrical optimisation of a segmented HPGe detector for spectroscopic gamma emission tomography—A simulation study

Segmented coaxial HPGe (High Purity Germanium) detectors have recently been shown to be feasible for Gamma Emission Tomography (GET). This type of detector allows for a combination of high efficiency and high energy resolution in gamma spectrometry of irradiated nuclear fuel. The ultimate aim of developing segmented HPGe for GET measurements is to achieve a high spatial resolution to facilitate imaging of rod-internal features and interrogation of smaller irradiated fuel samples.In this work, we present the optimisation of a segmented HPGe detector through a simulation study using the Monte Carlo particle transport code MCNP. Constraints to each dimension of the detector were identified, from manufacturing limitations and requirements arising from the use of a finite-sized collimator slit. In particular, a relationship between the minimum inner radius of the coaxial detector and the segments azimuthal dimension was derived based on the identified constraints. Segment azimuthal and radial dimensions have been varied (based on the derived relationship between the azimuthal and radial dimension) and the full energy efficiency and misidentification rate were evaluated to obtain the optimal dimensions. The optimal ranges of the segment dimensions were determined.

Simulation of the response of a segmented high-purity germanium detector for gamma emission tomography of nuclear fuel

Irradiation testing of nuclear fuel is routinely performed in nuclear test reactors. For qualification and licensing of accident-tolerant fuels or generation IV reactor fuels, an extensive increase in irradiation testing is foreseen in order to fill the gaps of existing validation data, both in normal operational conditions and in order to identify operational limits. Gamma emission tomography (GET) has been demonstrated as a viable technique for studies of the behavior of irradiated nuclear fuel, e.g., measurement of fission gas release and inspection of fuel behavior under loss-of-coolant accident conditions. In this work, the aim is to improve the technique of GET for irradiated nuclear fuel, by developing a detector concept that allows for a higher spatial resolution and/or faster interrogation. We present the working principles of a novel concept for gamma emission tomography using a segmented high-purity germanium (HPGe) detector. The performance of this concept was investigated using the Monte Carlo particle transport code MCNP. In particular, the data analysis of the proposed detector was evaluated, and the performance, in terms of full energy efficiency and misidentification rate (i.e., localization failure), was assessed. We concluded that the segmented HPGe detector has an advantageous performance as compared to the traditional single-channel detector systems. Due to the scattering nature of gamma rays, a trade-off is presented between efficiency and cross-talk; however, the performance is nevertheless a substantial improvement over the currently used single-channel HPGe detector systems.

Study of accuracy in the position determination with SALSA, a γ-scanning system for the characterization of segmented HPGe detectors

Accurate characterization of the electric response of segmented high-purity germanium (HPGe) detectors as a function of the interaction position is one of the current goals of the Nuclear Physics community seeking to perform γ-ray tracking or even imaging with these detectors. For this purpose, scanning devices must be developed to achieve the signal-position association with the highest precision. With a view to studying the accuracy achieved with SALSA, the SAlamanca Lyso-based Scanning Array, here we report a detailed study on the uncertainty sources and their effect in the position determination inside the HPGe detector to be scanned. The optimization performed on the design of SALSA, aimed at minimizing the effect of the uncertainty sources, afforded an intrinsic uncertainty of ∼2mm for large coaxial detectors and ∼1mm for planar ones.

Pulse shape analysis and position determination in segmented HPGe detectors: The AGATA detector library

The AGATA Detector Library (ADL) was developed for the calculation of signals from highly segmented large volume high-purity germanium (HPGe) detectors. ADL basis sets comprise a huge amount of calculated position-dependent detector pulse shapes. A basis set is needed for Pulse Shape Analysis (PSA). By means of PSA the interaction position of a $ \gamma$ -ray inside the active detector volume is determined. Theoretical concepts of the calculations are introduced and cover the relevant aspects of signal formation in HPGe. The approximations and the realization of the computer code with its input parameters are explained in detail. ADL is a versatile and modular computer code; new detectors can be implemented in this library. Measured position resolutions of the AGATA detectors based on ADL are discussed.

Characterisation of two AGATA asymmetric high purity germanium capsules

The AGATA spectrometer is an array of highly segmented high purity germanium detectors. The spectrometer uses pulse shape analysis in order to track Compton scattered γ-rays to increase the efficiency of nuclear spectroscopy studies. The characterisation of two high purity germanium detector capsules for AGATA of the same A-type has been performed at the University of Liverpool. This work will examine the uniformity of performance of the two capsules, including a comparison of the resolution and efficiency as well as a study of charge collection. The performance of the capsules shows good agreement, which is essential for the efficient operation of the γ-ray tracking array.

Identification and rejection of scattered neutrons in AGATA

γ Rays and neutrons, emitted following spontaneous fission of 252Cf, were measured in an AGATA experiment performed at INFN Laboratori Nazionali di Legnaro in Italy. The setup consisted of four AGATA triple cluster detectors (12 36-fold segmented high-purity germanium crystals), placed at a distance of 50cm from the source, and 16 HELENA BaF2 detectors. The aim of the experiment was to study the interaction of neutrons in the segmented high-purity germanium detectors of AGATA and to investigate the possibility to discriminate neutrons and γ rays with the γ-ray tracking technique. The BaF2 detectors were used for a time-of-flight measurement, which gave an independent discrimination of neutrons and γ rays and which was used to optimise the γ-ray tracking-based neutron rejection methods. It was found that standard γ-ray tracking, without any additional neutron rejection features, eliminates effectively most of the interaction points due to recoiling Ge nuclei after elastic scattering of neutrons. Standard tracking rejects also a significant amount of the events due to inelastic scattering of neutrons in the germanium crystals. Further enhancements of the neutron rejection was obtained by setting conditions on the following quantities, which were evaluated for each event by the tracking algorithm: energy of the first and second interaction point, difference in the calculated incoming direction of the γ ray, and figure-of-merit value. The experimental results of tracking with neutron rejection agree rather well with Geant4 simulations.

Bulk and surface effects in segmented high purity germanium detectors

Segmented high-purity germanium detectors have been developed for a variety of experiments. The segmentation is used to augment the excellent energy resolution of such a device with spatial information to disentangle event topologies. Several performance aspects of true-coaxial segmented detectors are presented, especially the effects due to the crystallographic axes and the problem of events close to the surfaces of the detector. A test stand and Monte Carlo tools developed to study such effects are introduced. The simulation tools can also be used to design novel detectors, such as segmented point-contact detectors. A particular design is presented and discussed.

Low noise, dual gain preamplifier with built in spectroscopic pulser for highly segmented high-purity germanium detectors

We present a fast and very low noise hybrid front-end electronic device consisting of a complex charge sensitive preamplifier with a built in fast reset circuitry and a very accurate spectroscopy p...

Segmented high-purity germanium detectors

Segmented planar high-purity germanium detectors were developed. Segmentation of p-n junction was performed by implantation of boron (for the n-type Ge) and mechanical grooving of the Li diffusion layer (for the p-type Ge). The electric and spectrometric characteristics of each individual segment and interactions between segments were investigated. The reliability and stability of the detectors were improved by using special passivation of the crystal surfaces.

Pulse shapes from electron and photon induced events in segmented high-purity germanium detectors

Experiments built to search for neutrinoless double beta-decay are limited in their sensitivity not only by the exposure but also by the amount of background encountered. Radioactive isotopes in the surrounding of the detectors which emit gamma-radiation are expected to be a significant source of background in the GERmanium Detector Array, GERDA. Methods to select electron induced events and discriminate against photon induced events inside a germanium detector are presented in this paper. The methods are based on the analysis of the time structure of the detector response. Data were taken with a segmented GERDA prototype detector. It is shown that the analysis of the time response of the detector can be used to distinguish multiply scattered photons from electrons.

Segmented quasi-coaxial HP-Ge detectors optimized for spatial localization of the events

A methodology for the design of segmented high purity Germanium detectors is presented. Its motivation follows from the necessity of making it easier to derive fast algorithms for measuring the gamma–detector interaction position. By using our study, detector geometries can be designed, which could allow a first estimate of the interaction coordinate along the carrier drift direction by analyzing the shape of the signal of a single segment. The maximum resolution that can be achieved and the corresponding conditions for the electronics are highlighted: basic unavoidable constraints limit the resolution to around 3 mm, but this first position estimate can be used, at least in principle, as a starting point for more accurate, although computationally heavy, algorithms.

Low-noise amplification of /spl gamma/-ray detector signals in hostile environments

We designed and realized a low-noise charge preamplifier for HPGe (High Purity Germanium) /spl gamma/-ray detectors, able to operate at a distance of 3 m to 6 m from the detector. One transistor only is placed in close proximity to the detector. Such a setup is required in applications where the detector works in hostile environments that could damage or destroy the electronic circuitry. Using 3 m RG62 cables and a 23 pF detector capacitance we obtained a noise of /spl sim/1.07 keV fwhm at 2 /spl mu/s shaping time, so fully compatible with /spl gamma/-spectroscopy requirements. By compensating the preamplifier so as to completely eliminate the ringing in its response function we obtained a rise-time of /spl sim/46 ns with 3 m cables and of /spl sim/80 ns with 5 m cables. With a different approach, or using a lower compensation capacitance and eliminating the ringing through a numerical post filter, we obtained a faster rise time of /spl sim/33 ns, with a detector-preamplifier distance of 5 m, while maintaining the low-noise performance. This latter setup is adequate for spectroscopy and tracking of /spl gamma/-rays with segmented HPGe detectors.

Time-domain Simulation of electronic noises

In this paper, a procedure is proposed to computer simulate the electronic noise of ionizing-radiation spectrometers. The viewpoint of the simulator is the output of the preamplifier, with or without an anti-aliasing filter, just in front of the ADC. Examples are given for the case of segmented high purity Germanium detectors (HPGe). The method makes use of the fractional calculus basics. A software procedure provides the noisy waveform as a function of the fundamental electrical-physical parameters of the system, including: detector capacitance, detector leakage current, feedback resistor, 1/f-noise coefficient of the input transistor, temperature of the preamplifier input devices. The ADC quantization noise is also included in the simulation.

A two meter curved-crystal spectrometer with improved efficiency for use at lampf

A high resolution, 2 m radius, curved-crystal gamma-ray spectrometer has been constructed to be used at the Los Alamos Meson Physics Facility. An increase in luminosity is achieved with a long, adjustable, curved, resolving slit system. The curved slit eliminates the error due to vertical divergence. A segmented high purity germanium detector is used. The curved crysta pivot, sine mechanism, and slit assembly are mounted on a prestressed concrete seismic mass pneumatically isolated from the floor. Data is presented on the operation, resolution, and efficiency of the spectrometer.