Transport Sediment Research Articles

Rapid formation of a modern bedrock canyon by a single flood event

Deep river canyons are thought to form slowly over geological time (see, for example, ref. 1), cut by moderate flows that reoccur every few years. In contrast, some of the most spectacular canyons on Earth and Mars were probably carved rapidly during ancient megaflood events. Quantification of the flood discharge, duration and erosion mechanics that operated during such events is hampered because we lack modern analogues. Canyon Lake Gorge, Texas, was carved in 2002 during a single catastrophic flood. The event offers a rare opportunity to analyse canyon formation and test palaeo-hydraulic-reconstruction techniques under known topographic and hydraulic conditions. Here we use digital topographic models and visible/near-infrared aerial images from before and after the flood, discharge measured during the event, field measurements and sediment-transport modelling to show that the flood moved metre-sized boulders, excavated ~7 m of limestone and transformed a soil-mantled valley into a bedrock canyon in just ~3 days. We find that canyon morphology is strongly dependent on rock type: plucking of limestone blocks produced waterfalls, inner channels and bedrock strath terraces, whereas abrasion of cemented alluvium sculpted walls, plunge pools and streamlined islands. Canyon formation was so rapid that erosion might have been limited by the ability of the flow to transport sediment. We suggest that our results might improve hydraulic reconstructions of similar megafloods on Earth and Mars.

Fluvial transport during thermally and pluvially induced peak runoff events in a glacier‐fed mountain catchment in western norway

.Results compiled after three years of process monitoring and analysis in the glacier‐fed Erdalen catchment, situated in the steep fjord‐landscape of western Norway, indicate that there are significant intra‐ and inter‐annual variations with respect to fluvial sediment transport rates and sediment yields. Three different periods with a high frequency of major discharge events can be identified over the year, with these three periods showing a significant inter‐annual variability. High runoff in spring (April–June) is mainly caused by snowmelt whereas major discharge events in summer (July–August) are due to thermally caused glacier melt. In autumn (September–November), major discharge events are associated with heavy rainfall events. Autumn is the most important period with respect to fluvial sediment transport and fluvial sediment yields. Fluvial sediment transport and fluvial sediment yields in Erdalen are altogether supply‐limited. The intensity of fluvial transport in autumn and over the entire year depends strongly on the number of heavy rainfall events that trigger transfers of sediments from slopes into channels via saturation overland flow with connected slope wash and debris flow events. Annual suspended sediment yields are about two times greater than annual solute yields corrected by atmospheric inputs. Suspended sediment concentrations in glacier melt water during summer and annual sediment yields in Erdalen are both lower than in many other glacierized catchments worldwide. Because of the quantitative importance of single meteorological events for fluvial sediment transport and yields, and the high intra‐ and inter‐annual variability of sediment yields in Erdalen, process monitoring and analysis will be continued to be able to calculate more reliable annual sediment yields and denudation rates.

Clay minerals and geochemistry record from northwest Mediterranean coastal lagoon sequence: Implications for paleostorm reconstruction

The paleostorm history of coastal lagoon environments (Pierre Blanche Lagoon, central part of the Gulf of Lions) has been established by integrating clay mineralogy and geochemical analysis. Clay mineralogy combined with bulk major and trace elements concentrations allow for the definition of four different end members: the Mosson drainage basin, the sandy barrier, the biogenic and the anthropic components. The two main sedimentary sources of the lagoonal system are the Mosson drainage basin which has a high concentration of smectite and Al 2O 3, and the sandy barrier characterized by high contents of illite, chlorite, SiO 2 and Zr. Smectite/(illite + chlorite), SiO 2/Al 2O 3 and Zr/Al 2O 3 ratios can be used to reconstruct the past storm history of the Pierre Blanche Lagoon. Our results indicate that the sensitivities of the clay mineralogy and geochemistry proxies are different. These sensitivities could be related: 1) first, to the comparison between different grain size for geochemistry and for clay mineralogy; 2) second, to the complexity of the mix (four end-members for the geochemistry and two end-members for the clay minerals); and 3) third, by the storm's ability to transport sediment of different sizes.

Sources and sinks of clay minerals on Mars

The recent identification of clay minerals on the Martian surface using visible–near infrared reflectance spectroscopy has had a profound effect on our view of aqueous alteration on Mars. Smectite, chlorite, kaolin group, and serpentine group minerals have been detected using the CRISM and OMEGA spectrometers, with Fe/Mg-smectite and chlorite varieties being the dominant types discovered throughout the ancient crust. Aqueous, eolian, and impact processes have transported and recycled some of these clays such that their current locations may not accurately reflect their formation environments. However, detrital clays could prove useful for constraining transport pathways and sediment provenance. Here we discuss the impact craters and channels that comprise the Uzboi–Ladon–Morava system, including Holden, Eberswalde, and Ladon craters, which represents a large-scale sediment sink for clay minerals derived from the surrounding Noachian crust. This system contains thick deposits of clay mineral-bearing strata that likely record a wide range of alluvial, fluvial, lacustrine, and eolian processes that provide direct insight into the Martian clay cycle. Broad concepts of sediment sources, sinks, and sediment transport paths can be outlined using orbital data, but future in situ exploration of the Martian sedimentary rock record will be necessary to distinguish fully between detrital and authigenic clay minerals, and thus to determine environmental conditions and transitions on ancient Mars.

A review of sediment dynamics in the Severn Estuary: Influence of flocculation

This paper provides a review and critique of the distributions and characteristics of non-cohesive and cohesive sediments within the Severn Estuary, with particular reference to floc properties. The estuary is hyper-tidal and, consequently, highly turbid along most of its length and it generally has two turbidity maxima. In the upper reaches of the estuary, suspended particulate matter (SPM) concentrations can be in excess of 10gl−1 for river flows up to 50m3s−1, rising to over 50gl−1 during periods of lower river flow. The lower estuary turbidity maximum originates in the vicinity of Bridgwater Bay where SPM concentrations may vary between 0.1–200gl−1. The formation of fluid mud is coupled to the spring-neap cycle and strong vertical gradients in SPM concentrations produce turbulence damping and drag reduction effects, and hence impair the ability of the flow to transport sediments. Flocculation is an important mechanism for controlling the behaviour of fine sediments and mean settling velocities of flocs vary between 0.8–6mms−1. A secondary consequence of flocculation is the formation of mud:sand mixtures in turbid suspensions. Improved understanding of the significance of flocculation processes is crucial as they may exert an influence on the mechanism by which adsorbed contaminants are transported in the system.

Sensitivity Analysis of Sediment Transport in Karun River

Shoushtar city is a coastal one why includes a big part of the Karun river and has many water uses; so the crevasse canal of the Gar-Gar as an artificial and manmade branch of the Karun, the biggest river in Iran, and in Shoushtar domain is started in place of the setting dam, Band-E-Mizzan, and it devotes 0.1(according to seasonal measurements averaged) of water volume flowing in the Karun route before the setting dam controlled by the 9 setting windows on the dam. Water current as volume of water, transport water and so sediment particles to other places in route of river canal. Widespread currents through width of river canal transport sediments and coastal erosion in coast lines that are influenced by topography and steepness of river canal. In this research after continuous and regular measurements in two warm and cold seasons (winter and spring of 2009) and comparing with the data collected by zonal water and electricity organization, Khuzestan state (for calibration of the measurements), contours of dominant current in the river width and widespread current with measured current spectrum around the setting dam will be drawn, then effective factors in forming dominant currents will be appointed there. The effective factors on destructiveness of currents in coastlines of the river with a meanders in it will be an applied and useful result of this paper.

Characterising the origin, nature and fate of sediment exported from catchments perturbed by active tectonics

ABSTRACTChanges to the tectonic boundary conditions governing erosional dynamics in upland catchments have a significant effect on the nature and magnitude of sediment supply to neighbouring basins. While these links have been explored in detail by numerical models of landscape evolution, there has been relatively little work to quantify the timing, characteristics and locus of sediment release from upland catchments in response to changing tectonic boundary conditions that are well‐constrained independently. We address this challenge by quantifying the volume and granulometric characteristics of sediment exported from modern rivers draining across active normal faults in the Central Apennines in Italy. We demonstrate that catchments undergoing a transient response to tectonics are associated with significant volumetric export of material derived primarily from the zone upstream of the fault, producing bi‐modal grain‐size distributions with elevated D84 values within the transient reach. This is in direct contrast to the headwaters, where the fluvial capacity to transport sediment is low and the grain‐size distribution of material in transit is fine and uni‐modal. The grain‐size response is driven by landslides feeding coarse material directly into the channel, and we show the amplitude of the signal is modulated by the degree of tectonic perturbation, once the threshold for bedrock landsliding is exceeded. Additionally, we evaluate the length‐scale over which this transient grain‐size signal propagates downstream into the basin. We show that the coarse‐fraction sediment released is retained in the proximal hanging‐wall if rates of tectonic subsidence are high and if the axial river system is small or far from the fault‐bounded mountain front. Our results therefore provide some of the first quantitative data to evaluate how transient landscape responses affect the locus, magnitude and calibre of sediment supply to basins.

Late Pleistocene fans and terraces in the Majes valley, southern Peru, and their relation to climatic variations

This study investigates the connection between sediment aggradation, erosion and climate in a desert environment of the Majes valley, southern Peru. Luminescence dating of terraces and fans shows that sediment aggradation correlates with wet time intervals on the Altiplano, suggesting a climatic influence on the aggradation–degradation cycles. Major periods of aggradation occurred between ~110–100, ~60–50 and 12–8 ka. More precipitation in the Majes catchment resulted in increased erosion and transportation of sediment from the hillslopes into the trunk river. As a result, the sediment loads exceeded the transport capacity of the Majes River and aggradation started in the lower reaches where the river gradient is less. Depletion of the hillslope sediment reservoirs caused a relative increase in the capacity of the trunk river to entrain and transport sediment, resulting in erosion of the previously deposited sediment. Consequently, although climate change may initiate a phase of sediment accumulation, degradation can be triggered by an autocyclic negative feedback and does not have to be driven by climatic change.

Changes in hydrology and erosion over a transition from grassland to shrubland

AbstractThe degradation of grasslands is a common problem across semi‐arid areas worldwide. Over the last 150 years, much of the south‐western United States has experienced significant land degradation, with desert grasslands becoming dominated by shrubs and concurrent changes in runoff and erosion which are thought to propagate further the process of degradation. Plot‐based experiments to determine how spatio‐temporal characteristics of soil moisture, runoff and erosion change over a transition from grassland to shrubland were carried out at four sites over a transition from black grama (Bouteloua eriopoda) grassland to creosotebush (Larrea tridentata) shrubland at the Sevilleta NWR LTER site in New Mexico. Each site consisted of a 10 × 30 m bounded runoff plot and adjacent characterization plots with nested sampling points where soil moisture content was measured. Results show distinct spatio‐temporal variations in soil moisture content, which are due to the net effect of processes operating at multiple spatial and temporal scales, such as plant uptake of water at local scales versus the redistribution of water during runoff events at the hillslope scale. There is an overall increase in runoff and erosion over the transition from grassland to shrubland, which is likely to be associated with an increase in connectivity of bare, runoff‐generating areas, although these increases do not appear to follow a linear trajectory. Erosion rates increased over the transition from grassland to shrubland, likely related in part to changes in runoff characteristics and the increased capacity of the runoff to detach, entrain and transport sediment. Over all plots, fine material was preferentially eroded which has potential implications for nutrient cycling since nutrients tend to be associated with fine sediment. Copyright © 2009 John Wiley & Sons, Ltd.

Synchronization of transport and supply in beach-dune interaction

This review considers the role of nearshore processes and morphological change as a flexible and dynamic constraint on the supply and transport of sediment between beach and dune. It is argued that the lack of information in this regard remains a central barrier to the development of a theory of beach-dune interaction that can be translated across scales and between field sites. Existing beach-dune models do not consider how and when sediment gets transferred to the backshore where it becomes available for transport by wind. Rather, existing models largely ascribe regional variations in dune morphology to fixed constraints on beach slope and sediment budget, without explicit recognition of processes involved. Recent (process-scale) transport studies have shown that the transfer of sediment is both spatially variable and temporally intermittent as a result of transport limitations across the beachface. While these studies have identified varied controls on sediment transport and exchange, there remains a limited capacity to predict the evolution of beach-dune systems, largely because the beachface tends to be viewed as a static transport surface without regard to supply or to the changing limits to transport. Following storm erosion, dune recovery first requires that the beach recovers through the onshore migration and welding of nearshore bars, followed by accretion in the backshore to create a supply of sediment for transport by the wind. The dependence of dune recovery on the synchronization of transport events with the recovery of sediment supply in the backshore creates a strong asymmetry in dune recovery that makes barrier island susceptible to widespread erosion and breaching if a change in the frequency or grouping of storm events is capable of resetting the bar system (offshore) before the next extreme storm.

An observation‐based stochastic model for sediment and vegetation dynamics in the floodplain of an Alpine braided river

Riparian vegetation dynamics in Alpine rivers are to a large extent driven by the timing and magnitude of floods which inundate the floodplain, transport sediment, erode the river bed, and create and destroy suitable germination sites. Here we present a stochastic approach for studying sediment‐vegetation dynamics lumped at the floodplain scale and driven by stochastic flood disturbances. The premise of the model is that floods erode riparian vegetation in the inundated part of the floodplain and expose bare sediment surfaces. In the absence of subsequent flooding these surfaces are gradually recolonized. The stochastic nature of the disturbance process and the deterministic rate of vegetation colonization are described by a Poisson arrival of floods and a process equation which treats the floodplain erosion and vegetation colonization processes, respectively. An analytical solution is developed to obtain the probability density function of the exposed sediment area. The model is applied to the Maggia River in Switzerland, where it reproduces the changes in riparian vegetation cover observed from aerial photographs with an absolute error less than 5%. The model has potential as a tool to study the impacts of changes in the disturbance regime on sediment and vegetation dynamics.

Spatial distribution of land cover and vegetation activity along topographic gradient in an arid river valley, SW China

Anthropogenic activities have become more and more important in characterizing the landscape, but their impacts are still restricted by natural environments. This paper discusses the interactions of anthropogenic activity, vegetation activity and topography through describing the spatial distribution of land cover and vegetation activity (represented by Normalized Difference Vegetation Index, NDVI) along topographic gradient in a mountainous area of southwestern China. Our results indicate that the existing landscape pattern is controlled by anthropogenic activities as well as topographic factors. Intensive anthropogenic activities mainly occur in areas with relatively low elevation, gentle and concave slopes, as these areas are easy and convenient to attain for human. Because of the destruction by human, some land cover types (mainly grassland and shrub) are only found in relatively harsher environments. This study also finds that topographic wetness index (W) used in other places only reflects runoff generation capacity, but not indicate the real spatial pattern of soil water content in this area. The relationships between NDVI and W, and NDVI and length slope factor (LSF) show that runoff and erosion have complex effects on vegetation activity. Greater values of W and LSF will lead to stronger capacity to produce runoff and transport sediment, and thereby increase soil water content and soil deposition, whereas beyond a certain threshold runoff and erosion are so strong that they would destruct vegetation growth. This study provides information needed to successfully restore native vegetation, improve land management, and promote sustainable development in mountainous areas, especially for developing regions.

Soil erosion prediction in the Grande River Basin, Brazil using distributed modeling

Mapping and assessment of erosion risk is an important tool for planning of natural resources management, allowing researchers to modify land-use properly and implement management strategies more sustainable in the long-term. The Grande River Basin (GRB), located in Minas Gerais State, is one of the Planning Units for Management of Water Resources (UPGRH) and is divided into seven smaller units of UPGRH. GD1 is one of them that is essential for the future development of Minas Gerais State due to its high water yield capacity and potential for electric energy production. The objective of this study is to apply the Universal Soil Loss Equation (USLE) with GIS PCRaster in order to estimate potential soil loss from the Grande River Basin upstream from the Itutinga/Camargos Hydroelectric Plant Reservoir (GD1), allowing identification of the susceptible areas to water erosion and estimate of the sediment delivery ratio for the adoption of land management so that further soil loss can be minimized. For the USLE model, the following factors were used: rainfall–runoff erosivity (R), erodibility (K), topographic (LS), cover-management (C) and support practice (P). The Fournier Index was applied to estimate R for the basin using six pluviometric stations. Maps of the K, C, LS and P factors were derived from the digital elevation model (DEM), and soil and land-use maps, taking into account information available in the literature. In order to validate the simulation process, Sediment Delivery Ratio (SDR) was estimated, which is based on transported sediment (TS) to basin outlet and mean soil loss in the basin (MSL). The SDR calculation included data (total solids in the water and respective discharge) between 1996 and 2003 which were measured at a gauging station located on the Grande River and a daily flow data set was obtained from the Brazilian National Water Agency (ANA). It was possible to validate the erosion process based on the USLE and SDR application for the basin conditions, since absolute errors of estimate were low. The major area of the basin (about 53%) had an average annual soil loss of less than 5 t ha− 1 yr− 1. With the results obtained we were able to conclude that 49% of the overall basin presently has soil loss greater than the tolerable rate, thus indicating that there are zones where the erosion process is critical, meaning that both management and land-use have not been used appropriately in these areas of the basin. The methodology applied showed acceptable precision and allowed identification of the most susceptible areas to water erosion, constituting an important predictive tool for soil and environmental management in this region, which is highly relevant for prediction of varying development scenarios for Minas Gerais State due to its hydroelectric energy potential. This approach can be applied to other areas for simple, reliable identification of critical areas of soil erosion in watersheds.

Nature of flow and turbulence structure around an in‐stream vertical plate in a shallow channel and the implications for sediment erosion

Detailed knowledge of the dynamics of large‐scale turbulence structures is needed to understand the geomorphodynamic processes around in‐stream obstacles present in rivers. Detached Eddy Simulation is used to study the flow past a high‐aspect‐ratio rectangular cylinder (plate) mounted on a flat‐bed relatively shallow channel at a channel Reynolds number of 2.4 × 105. Similar to other flows past surface‐mounted bluff bodies, the large amplification of the turbulence inside the horseshoe vortex system is because the core of the main necklace vortex is subject to large‐scale bimodal oscillations. The presence of a sharp edge at the flanks of the obstruction fixes the position of the flow separation at all depths and induces the formation and shedding of very strong wake rollers over the whole channel depth. Compared with the case of a circular cylinder where the intensity of the rollers decays significantly in the near‐bed region because the incoming flow velocity is not sufficient to force the wake to transition from subcritical to supercritical regime, in the case of a high‐aspect‐ratio rectangular cylinder the passage of the rollers was found to induce high bed‐shear stresses at large distances (6–8 D) behind the obstruction. Also, the nondimensional values of the pressure root‐mean‐square fluctuations at the bed were found to be about 1 order of magnitude higher than the ones predicted for circular cylinders. Overall, this shows that the shape of the in‐stream obstruction can greatly modify the dynamics of the large‐scale coherent structures, the nature of their interactions, and ultimately, their capability to entrain and transport sediment particles and the speed at which the scour process evolves during its initial stages.

Transport slopes, sediment cover, and bedrock channel incision in the Henry Mountains, Utah

Field data from channels in the Henry Mountains of Utah demonstrate that abundant coarse sediment can inhibit fluvial incision into bedrock by armoring channel beds (the cover effect). We compare several small channels that share tributary junctions and have incised into the same sedimentary bedrock unit (Navajo Sandstone) but contain differing amounts of coarse diorite clasts owing to the spatial distribution of localized sediment sources. Bedrock channels that contain abundant clasts (diorite‐rich) have steeper longitudinal slopes than tributaries of these channels with smaller drainage areas and less sediment (diorite‐poor). The diorite‐poor tributaries have incised more deeply to lower average slopes and have more reach‐scale slope variability, which may reflect bedrock properties, longitudinal sediment sorting, and incision at lower sediment supply. Diorite‐rich channels have less bedrock exposed and smoother longitudinal profiles than diorite‐poor channels. We find that (1) coarse sediment can mantle bedrock channel beds and reduce the efficiency of incision, validating the hypothesized cover effect in fluvial incision models; (2) the channel slope needed to transport the sediment load can be larger than that needed to erode bedrock, suggesting that the slope of incising bedrock channels can become adjusted to the sediment load; (3) when abundant sediment is available, transport capacity rather than thresholds of motion can be dominant in setting bedrock channel slope; and (4) cover effects can be important even when moderate amounts of bedrock are exposed in channel beds.

Pacific Basin tsunami hazards associated with mass flows in the Aleutian arc of Alaska

We analyze mass-flow tsunami generation for selected areas within the Aleutian arc of Alaska using results from numerical simulation of hypothetical but plausible mass-flow sources such as submarine landslides and volcanic debris avalanches. The Aleutian arc consists of a chain of volcanic mountains, volcanic islands, and submarine canyons, surrounded by a low-relief continental shelf above about 1000–2000 m water depth. Parts of the arc are fragmented into a series of fault-bounded blocks, tens to hundreds of kilometers in length, and separated from one another by distinctive fault-controlled canyons that are roughly normal to the arc axis. The canyons are natural regions for the accumulation and conveyance of sediment derived from glacial and volcanic processes. The volcanic islands in the region include a number of historically active volcanoes and some possess geological evidence for large-scale sector collapse into the sea. Large scale mass-flow deposits have not been mapped on the seafloor south of the Aleutian Islands, in part because most of the area has never been examined at the resolution required to identify such features, and in part because of the complex nature of erosional and depositional processes. Extensive submarine landslide deposits and debris flows are known on the north side of the arc and are common in similar settings elsewhere and thus they likely exist on the trench slope south of the Aleutian Islands. Because the Aleutian arc is surrounded by deep, open ocean, mass flows of unconsolidated debris that originate either as submarine landslides or as volcanic debris avalanches entering the sea may be potential tsunami sources. To test this hypothesis we present a series of numerical simulations of submarine mass-flow initiated tsunamis from eight different source areas. We consider four submarine mass flows originating in submarine canyons and four flows that evolve from submarine landslides on the trench slope. The flows have lengths that range from 40 to 80 km, maximum thicknesses of 400–800 m, and maximum widths of 10–40 km. We also evaluate tsunami generation by volcanic debris avalanches associated with flank collapse, at four locations (Makushin, Cleveland, Seguam and Yunaska SW volcanoes), which represent large to moderate sized events in this region. We calculate tsunami sources using the numerical model TOPICS and simulate wave propagation across the Pacific using a spherical Boussinesq model, which is a modified version of the public domain code FUNWAVE. Our numerical simulations indicate that geologically plausible mass flows originating in the North Pacific near the Aleutian Islands can indeed generate large local tsunamis as well as large transoceanic tsunamis. These waves may be several meters in elevation at distal locations, such as Japan, Hawaii, and along the North and South American coastlines where they would constitute significant hazards.

Suspended sediment transport in a highly erodible catchment: The River Isábena (Southern Pyrenees)

Understanding and quantifying sediment load is important in catchments draining highly erodible materials that eventually contribute to siltation of downstream reservoirs. Within this context, the suspended sediment transport and its temporal dynamics have been studied in the River Isábena (445 km 2, south-central Pyrenees, Ebro basin) by means of direct sampling and turbidity recording during a 3-year dry period. The average flood-suspended sediment concentration was 8 g l − 1 , with maximum instantaneous values above 350 g l − 1 . The high scatter between discharge and suspended sediment concentrations (up to five orders of magnitude) has not permitted the use of rating curve methods to estimate the total load. Interpolation techniques yielded a mean annual sediment load of 184,253 t y − 1 for the study period, with a specific yield of 414 t km − 2 y − 1 . This value resembles those reported for small torrents in nearby mountainous environments and is the result of the high connectivity between the badland source areas and stream courses, a fact that maximises sediment conveyance through the catchment. Floods dominated the sediment transport and yield. However, sediment transport was more constant through time than that observed in Mediterranean counterparts; this can be attributed to the role of base flows that entrain fine sediment temporarily stored in the channel and force the river to carry high sediment concentrations (i.e., generally in the order of 0.5 g l − 1 ), even under minimum flow conditions.

Evaluating debris slide occurrence using digital data: paraglacial activity in Chilliwack Valley, British Columbia

Debris sliding is one of the most important processes acting to transport sediment within mountainous regions. Detailed study of debris slide activity at the basin scale typically involves landslide inventories generated from aerial photographs. However, it has been shown that some types of rapid mass movement can be accurately identified using a combination of high-resolution satellite imagery and digital elevation data. This approach is beneficial as the digital products allow for a more accurate and efficient data throughput into various types of geomorphic analysis. Here, we demonstrate the use of an automated inventory in the geomorphometric evaluation of debris slide initiation for the Chilliwack Basin, British Columbia, Canada. Our results indicate that the occurrence of debris sliding is primarily determined by topographical controls. For basins that are in equilibrium with the existing climate, the frequency of debris sliding should demonstrate a strong relationship to bedrock geology as the production of unconsolidated materials available for failure is a function of weathering rates under these conditions. The lack of bedrock control within the Chilliwack Basin suggests a state of paraglacial relaxation, wherein glacial deposits dominate the sediment cascade within the area. Therefore, topographic parameters can be used to discriminate the location of metastable slopes where debris slide erosion will be active. The use of digital data in the characterization of debris slide occurrence would seem to be a viable alternative to the more traditional methods.

Wave-induced steady streaming, mass transport and net sediment transport in rough turbulent ocean bottom boundary layers

The interaction between two important mechanisms which causes streaming has been investigated by numerical simulations of the seabed boundary layer beneath both sinusoidal waves and Stokes second order waves, as well as horizontally uniform bottom boundary layers with asymmetric forcing. These two mechanisms are streaming caused by turbulence asymmetry in successive wave half-cycles (beneath asymmetric forcing), and streaming caused by the presence of a vertical wave velocity within the seabed boundary layer as earlier explained by Longuet-Higgins. The effect of wave asymmetry, wave length to water depth ratio, and bottom roughness have been investigated for realistic physical situations. The streaming induced sediment dynamics near the ocean bottom has been investigated; both the resulting suspended load and bedload are presented. Finally, the mass transport (wave-averaged Lagrangian velocity) has been studied for a range of wave conditions. The streaming velocities beneath sinusoidal waves (Longuet-Higgins streaming) is always in the direction of wave propagation, while the streaming velocities in horizontally uniform boundary layers with asymmetric forcing are always negative. Thus the effect of asymmetry in second order Stokes waves is either to reduce the streaming velocity in the direction of wave propagation, or, for long waves relative to the water depth, to induce a streaming velocity against the direction of wave propagation. It appears that the Longuet-Higgins streaming decreases as the wave length increases for a given water depth, and the effect of wave asymmetry can dominate, leading to a steady streaming against the wave propagation. Furthermore, the asymmetry of second order Stokes waves reduces the mass transport (wave-averaged Lagrangian velocity) as compared with sinusoidal waves. The boundary layer streaming leads to a wave-averaged transport of suspended sediments and bedload in the direction of wave propagation.

A few aspects regarding sediment yield on the lower reach of Solonet Basin.

The sediment yield represents the link between the erosion from the basin and aggradation. Linear and vertical erosion from the low-flow channel as well as slope processes, constitute the main factor in supplying the material for the sediment transport. The Solonet River represents one of the most important affluents of the Suceava River regarding the sediment yield. The correlations made in the current work indicate the particularity of the sediment transporting in the Solonet Basin. In this general context, the informations regarding this phenomenon are very important for knowing the evolution of transporting capacity of the stream.