Sediment Waves Research Articles

Correction to: Sediment waves and the gravitational stability of volcanic jets

Correction to: Sediment waves and the gravitational stability of volcanic jets

Controls on the architectural evolution of deep-water channel overbank sediment wave fields: insights from the Hikurangi Channel, offshore New Zealand

ABSTRACT Deep-water channels can be bound by overbank deposits, resulting from overspilling flows, which are often ornamented with sediment waves. Here, high-resolution bathymetry, backscatter, and 2D and 3D seismic data are integrated to discern the controls on flow processes on the overbank areas of the Hikurangi Channel. Qualitative seismic interpretation and quantitative analyses of sediment wave morphologies and distributions are conducted through the shallowest 600 m of stratigraphy up to the seafloor. Four outer-bend wave fields are present throughout the studied stratigraphy on the landward margin (left margin looking down-channel) only. Originally closely spaced or combined, these fields evolved to become spatially separated; two of the separate wave fields became further subdivided into distinct outer- and inner-bend fields, whose constituent waves developed distinct differences in morphology and distribution. Sediment wave character is used to interpret the direction and strength of overbank flow. Nine controls on such flow and associated deposition are identified: flow versus conduit size, overbank gradient, flow tuning, Coriolis forcing, contour current activity, flow reflection, centrifugal forcing, interaction with externally derived flows, and interaction of overspill from different locations. Their relative importance may vary across parts of overbank areas, both spatially and temporally, controlling wave field development such that: (1) outer-bend wave fields only develop on the landward margin; (2) the influence of centrifugal force on outer-bend overbanks has increased through time, accompanying a general increase in channel sinuosity; (3) inner-bend wave fields on the landward margin form by the interaction of Coriolis-enhanced inner-bend overbank flow, and outer-bank flow from up-channel bends; (4) inner-bend fields on the oceanward margin form by the interaction of axial flow through wave troughs, and a transverse, toward-channel flow component. This work has implications for interpreting overbank flow from seafloor and seismic data, and for palaeogeographic reconstructions from outcrop data.

Sediment waves and the gravitational stability of volcanic jets

Sediment waves and the gravitational stability of volcanic jets

A Numerical Study of Sheet Flow Driven by Skewed-Asymmetric Shoaling Waves Using SedWaveFoam

SedWaveFoam, an OpenFOAM-based two-phase model that concurrently resolves the free surface wave field, and the bottom boundary layer is used to investigate sediment transport throughout the entire water column. The numerical model was validated with large-scale wave flume data for sheet flow driven by shoaling skewed-asymmetric waves with two different grain sizes. Newly obtained model results were combined with previous nonbreaking and near-breaking wave cases to develop parameterization methods for time-dependent bed shear stress and sediment transport rate under various sediment sizes and wave conditions. Gonzalez-Rodriguez and Madsen (GRM07) and quasi-steady approaches were compared for intra-wave bed shear stress. The results show that in strongly asymmetric flows, considering the separated boundary layer development processes at each half wave-cycle (i.e., GRM07) is essential to accurately estimating bed shear stress and highlights the impact of phase-lag effects on sediment transport rates. The quasi-steady approach underpredicts (∼60%) sediment transport rates, especially for fine grains under large velocity asymmetry. A modified phase-lag parameter, incorporating velocity asymmetry, sediment stirring, and settling processes is proposed to extend the Meyer-Peter and Mueller type power law formula. The extended formula accurately estimated the enhanced net onshore sediment transport rate observed under skewed-asymmetric wave conditions.

Different types of gravity-driven flow deposits and associated bedforms in the Upper Bengal Fan, offshore Myanmar

This study uses 3D reflection seismic data to investigate how sediment gravity flows contribute to the evolution of the lower continental slope of the Myanmar margin that is part of the Bengal Fan, the largest deep-water fan system in the world. Seafloor and subseafloor data show large sediment wave fields that developed on both flanks of an extensive submarine canyon. The sediment waves exhibit asymmetric stoss and lee sides, wave lengths and heights of 850–3000 m and 25–70 m, respectively, and an upslope direction of migration. Seismic data reveals the presence of multiple fields of vertically stacked sediment waves, interbedded with units characterised by a chaotic seismic facies that accumulate mainly in the troughs of the sediment waves and can be tracked laterally to the adjacent canyons. According to their seismic facies, geometry, and internal architecture these chaotic units are interpreted as debrites. Seismic attributes extracted from different horizons indicate that the sediment waves are dominated by fine-grained sediment, while the debrites are probably associated with coarser-grained deposits. The debrites fill the troughs of the sediment waves, as well as the downstream portions of canyon thalweg, thus flattening the paleo-seafloor. The sediment waves are interpreted as cyclic steps formed by low-density turbidity currents flowing across the slope down to the basin floor, where the change in gradient favours the formation of hydraulic jumps and the transition from supercritical to subcritical flow conditions. A conceptual model for the sediment wave evolution was proposed for the study area, in the transitional environment on the lower slope, with low-density gravity flow deposits and high-density debris flow deposits alternatively accumulating on the major gravity flow conduits.

Distribution, characteristics, and processes of formation of sediment waves along the Indian north-eastern continental margin

Muddy, upslope-migrating sediment waves, with their crestal lines parallel to the bathymetric contours, are the dominant geomorphic elements in the entire lower slope along the Indian north-eastern continental margin. Wave dimensions are maximum with high but differing degrees of sediment accretions on the upslope and downslope sides of wave crests and with most upslope wave migrations in the northeastern part of the study area, having relatively low seafloor gradients. The wave dimensions decrease with lower as well as differing degrees of sediment accretions on both sides of wave crests and with lower upslope wave migrations in the southwestern parts of the study area, having steeper seafloor gradients. Within each area of the lower slope, starting from updip, wave dimensions increase to their maximum at some distance downdip with optimal low seafloor gradients. Farther downdip, the wave dimensions decrease even with lower seafloor gradients continuing. Also, within each area, at the base of the wave intervals, the waves are small and grow into larger features with more sediment accretions in the upper intervals.The distribution and characteristics of sediment waves observed along the Indian margin are indicative of deposition by down-slope moving, unconfined turbidity currents that have evolved from other sediment gravity flows derived from several point sources updip. Along-slope bottom currents are least likely agents of wave deposition here. We interpret that the spatial and temporal variations in wave dimensions are due to the variations in seafloor gradients, turbidity current flow characteristics, frequency, duration and total number of flow events in space and time.

Geomorphology of a bended submarine canyon in Wanhu Seamount region, northern South China Sea: Insights from manned submersible observation and measurement

Submarine canyons can transport large volumes of terrigenous material from the continent to the deep-sea environment and are the primary conduits of source-to-sink systems. The large-scale morphologic features of canyons have been well studied using seismic reflection and the bathymetry data. However, detailed analyses of the small-scale elements of canyon morphology are relatively few because of the limited resolution of traditional field investigations. In this paper, the multi-scaled geomorphology of a bended submarine canyon (canyon C4) located in Wanhu Seamount region (northern South China Sea) is described and discussed based on the in-situ high-definition video data, high-precision near-bottom acoustic data, and push-cores obtained using the manned submersible vehicle. The NNW-trending submarine canyon diverted to 122.5° at the foot of Wanhu Seamount, and the fresh erosional surfaces were recorded using the video data at the canyon axis bend. A total of eight sediment waves were generated at the overbank of the bending region. These waves contain wavelengths and wave heights decreasing in an upslope direction from the canyon axis towards the Wanhu Seamount. The C-M pattern (coarsest one percentile grain size versus median grain size values), grain cumulative probability curves, and grain size gradations derived from the sediment cores suggested that these sediment waves were induced by a turbidity current. The bending of the canyon resulted from the deflection and reflection of the turbidity currents, which were constrained by Wanhu Seamount. The abnormal geomorphologies of some sediment waves were related to the back-squeezed underflow of the turbidity currents. The turbidity current behavior was compared and found to be in agreement with the experimental and modeling simulation results mentioned in the literature. However, the morphologic setting in the natural case was more complex than that observed from the experiments, with the flow behaviors being more complicated. Future studies are required for more detailed comparison between the natural case and simulations to better understand the turbidity current behavior in a bended submarine canyon.

Bottom current-controlled Quaternary sedimentation at the foot of the Malta Escarpment (Ionian Basin, Mediterranean)

A better understanding of the evolution of bottom current circulation and associated deposits is significant for many applications including paleoclimatology and geological hazard. Besides the large contourite drifts, bottom currents may generate fields of large sediment waves that, depending on their height and velocity of migration, may pose severe risk for infrastructures. Conversely, the time span of their paleoceanographic record is generally relatively short. We use bathymetry data, sub-bottom and seismic reflection profiles and legacy oceanographic data to analyze the sediment waves occurring in a deep environment (from 2400 to 3800 m water depth at the foot of the Malta Escarpment in the Mediterranean Sea) to understand their evolution in time, their significance for paleoceanography, and their relation to present day hydrographic conditions. In the absence of direct stratigraphic information, we use the information from nearby studies and from ODP Site 964 and DSDP Site 374 to constrain the age of the sedimentary successions. We discover that these waves (about 2.5 km in wavelength, 50 m in height, with crest sub-perpendicular to the continental slope trend) have been steadily growing and migrating northward since about 500 ka, although an irregular growth and unsteady migration is distinguishable since about 1800 ka. The waves are generated by predominantly alongslope southward flowing bottom currents compatible with modern hydraulic conditions (mean flow speed of ~5 cm s−1, peaks of 15 cm s−1). The rate of crest migration (~ 2.0–3.2 mm a−1) and the average sedimentation rate (0.64–0.69 mm a−1) are unusually high for deep sea environments away from turbidity currents paths. We infer that the steady development of sediment waves is produced by a drastic increase in sediment input to the Ionian Basin resulting from the tectonic uplift in NE Sicily and Calabria and the onset of a relatively steady, low energy bottom current regime following the Mid-Pleistocene Transition. We attempt to extract information on orbital cyclicity preserved in the seismic record from the power spectra of virtual seismic traces from the well preserved succession of 5 visually discernible, regularly spaced sub-units consisting of alternation of high-amplitude and low-reflectivity packages within the last 500 ka. Peaks in the power spectra can be identified around orbital obliquity and precession periodicities, while eccentricity appears not to be recorded. We discuss the results of seismic cyclicity analysis relative to uncertainties of stratigraphic and petrophysical constraints. The sediment waves along the foot of the Malta escarpment are an excellent candidate for the extraction of a long, continuous and high resolution sedimentary record of the paleo circulation changes and climate cycles in the Mediterranean Sea since about 500 ka.

Turbidity currents at polar latitudes: A case study of NP-28 channel in the Amundsen Basin, Arctic Ocean

Turbidity currents are fundamental marine sedimentary processes that deliver sediments from continental margins to deep ocean basins. They develop and maintain deep-sea channels that act as principal conduits for this sediment delivery. While turbidity current channels are frequently considered as analogous to river channel systems, there are distinct differences in the mechanisms that govern their formation. This is particularly true at high-latitudes, where glacial margin processes and Coriolis effects have direct consequences on the characteristics of channel-forming turbidity currents. Understanding the latitudinal controls that influence the structure of these channels is thus a key objective of this study.The geomorphology of the glacial-fed NP-28 Channel in the Amundsen Basin of the Arctic Ocean, the highest-latitude deep-sea channel on Earth, is assessed. Compilation of available bathymetry shows that the channel follows a low-gradient, low-sinuosity path roughly paralleling the base of Lomonosov Ridge. The channel has a broad cross-section comparable to other glacially-fed and tributary-fed deep-ocean channel systems. High-resolution subbottom profiles reveal intrachannel terraces and an incised channel thalweg that were likely formed through erosion by traction-dominated currents; stratified levees and sediment waves were likely deposited by overbank flows. Coriolis deflection of channel-filling currents is evident from consistent levee asymmetry along the entire channel path. Within the channel, the channel floor geometry suggests local dominance of both Coriolis and centrifugal forces at the base of the channel; the latter in particular where the channel is deflected by external bedrock. Overall, channel morphology is largely consistent with existing models of Coriolis force effects on turbidity currents at high latitudes. This influence of Coriolis force, in addition to the presumed glacial style of the sediment input and bedrock interaction with the channel path, are considered the major factors that affected channel morphology.

Middle to late Pleistocene palaeoceanography inferred from ridge-furrow structures on the continental slope offshore Angola

3D seismic reflection data have been used to map 784 enigmatic ridge-furrow structures in water depths of 0.8–1.7 km offshore Angola. The structures are characterised by asymmetric ridges with intervening furrows, typically <0.5–5.5 km long, with a sinuous to bifurcating planform. The furrows are well-imaged on seismic profiles, and range from 60 to 80 m in width, up to 10 m in amplitude, and 0.1–1 km in wavelength. The furrow sets aggrade in a downslope direction and occur in arrays that have an internally consistent direction that is either parallel, or slightly diverging or converging. Two alternative origins are considered: (1) furrows that are dominantly erosional scours formed from seafloor-incising currents flowing parallel to the furrows, with the ridges a by-product of the erosion, or (2) the ridge-furrows are bottom-current generated dune-type sediment waves. The latter interpretation allows us to reconstruct a key component of the deepwater bottom-currents regime along this continental margin from the Middle Pleistocene to the present-day. The most likely transport agent responsible for the interpreted sediment waves is a palaeo-bottom-current regime with a flow direction toward the west-southwest/south-southwest, the same direction of the sediment wave migration. The palaeo-bottom currents would then be expected to have a very specific flow regime with 1 < Frmax < 2 and may originate from longshore currents cascading off the shelf, Congo Canyon distal overflows, breaking internal waves or a combination of these processes.

Impact of bottom currents on deep water sedimentary processes of Canada Basin, Arctic Ocean

Canada Basin Abyssal Plain (CBAP) of the Arctic Ocean is incredibly flat and featureless at first appearance. Sediments of the basin have been interpreted to be turbidites interbedded with hemipelagic sediments. It is hypothesised, however, that deep-ocean geostrophic currents are active here as they are in most ocean basins. Compilations of modern bathymetry and subbottom profiler data are used to assess the possibility of ocean currents and their influence on sediment distribution within Canada Basin. Off of the Alaska-Beaufort margin, eastwardly deflected levees and fans in 3000 to 3800 m water depth along with oblique sediment waves on top of these features suggest a mixed system of turbidity currents influenced by cyclonic flowing geostrophic currents. These features probably formed during glaciations and lower sea level stands when the adjacent Chukchi Shelf was subaerial. Sediment delivery to the margin was likely more pronounced than today, and bottom current activity was presumably intensified. A large (100 km-wide) plastered drift and smaller bedforms were revealed by subbottom profile data along the Canadian Arctic Archipelago margin, in 3000 to 3850 m water depth. It is presumed that these deposits were formed as plumes of sediment, input through glacial outwash or outwash via the Mackenzie River. These plumes were then affected by deep contour-following currents to produce contourites. Large (up to 30 km wavelength) migrating bedforms within northern CBAP are believed to have resulted from turbidity current plumes sourced from the Mackenzie Fan that were additionally influenced by contour current reworking as part of returning cyclonic flow of deep geostrophic currents. There is little to no age control to groundtruth the stratigraphy observed in seismic profiles, but it seems likely, given their near-surface appearance, that sediment input and bottom current intensity was heavily influenced by climatic conditions related to past glaciations and associated relative sea level changes.

Sedimentary Waves of the Southeastern Barents Sea Shelf (Kanin Peninsula–Cheshskaya Bay)

Sedimentary Waves of the Southeastern Barents Sea Shelf (Kanin Peninsula–Cheshskaya Bay)

The erosive power of the Malvinas Current: Influence of bottom currents on morpho-sedimentary features along the northern Argentine margin (SW Atlantic Ocean)

Sediment deposits formed mainly under the influence of bottom currents (contourites) are widely used as high-resolution archives for reconstructing past ocean conditions. However, the driving processes of Contourite Depositional Systems (CDS) are not entirely understood. The aim of this study is to establish a clearer link between contourite features and the oceanographic processes that form them. The morphosedimentary characteristics of a large CDS were analysed together with the current dynamics along the northern Argentine continental margin. This study combines multibeam bathymetry, seismo-acoustic data, sediment samples, vessel-mounted Acoustic Doppler Current Profiler (VM-ADCP) data and numerical modelling of ocean currents.The contouritic features include large contourite terraces (La Plata Terrace, Ewing Terrace) and an abraded surface connecting the terraces, as well as smaller erosional and depositional features like moats, erosion surfaces on the Ewing Terrace, sediment waves and contourite drifts. Measured and modelled near-bottom currents are vigorous (up to 63 cm/s at 150–200 m above the seafloor) where abraded surfaces and moats are present, and relatively weak (below 30 cm/s) on the La Plata Terrace and the Ewing Terrace. Generally, bottom currents follow the upper and middle slope morphology. Decreasing velocity of water masses flowing northward leads to less erosion and finer sediment deposits. ADCP data and the hydrodynamic model show the formation of eddies near the seafloor which probably lead to the small erosion surfaces on the Ewing Terrace, even though it is mainly a depositional environment. Overall, this study contributes to a better understanding of the formation of CDS and can help future reconstructions of past ocean conditions based on sedimentary structures.

Origin of deep-water sediment wave fields in the Northern Continental Slope, South China Sea

Origin of deep-water sediment wave fields in the Northern Continental Slope, South China Sea

A Scalable, Supervised Classification of Seabed Sediment Waves Using an Object-Based Image Analysis Approach

National mapping programs (e.g., INFOMAR and MAREANO) and global efforts (Seabed 2030) acquire large volumes of multibeam echosounder data to map large areas of the seafloor. Developing an objective, automated and repeatable approach to extract meaningful information from such vast quantities of data is now essential. Many automated or semi-automated approaches have been defined to achieve this goal. However, such efforts have resulted in classification schemes that are isolated or bespoke, and therefore it is necessary to form a standardised classification method. Sediment wave fields are the ideal platform for this as they maintain consistent morphologies across various spatial scales and influence the distribution of biological assemblages. Here, we apply an object-based image analysis (OBIA) workflow to multibeam bathymetry to compare the accuracy of four classifiers (two multilayer perceptrons, support vector machine, and voting ensemble) in identifying seabed sediment waves across three separate study sites. The classifiers are trained on high-spatial-resolution (0.5 m) multibeam bathymetric data from Cork Harbour, Ireland and are then applied to lower-spatial-resolution EMODnet data (25 m) from the Hemptons Turbot Bank SAC and offshore of County Wexford, Ireland. A stratified 10-fold cross-validation was enacted to assess overfitting to the sample data. Samples were taken from the lower-resolution sites and examined separately to determine the efficacy of classification. Results showed that the voting ensemble classifier achieved the most consistent accuracy scores across the high-resolution and low-resolution sites. This is the first object-based image analysis classification of bathymetric data able to cope with significant disparity in spatial resolution. Applications for this approach include benthic current speed assessments, a geomorphological classification framework for benthic biota, and a baseline for monitoring of marine protected areas.

Sedimentary Waves and Reconstruction of Bottom Currents in the Novaya Zemlya Trough of the Kara Sea

Sedimentary Waves and Reconstruction of Bottom Currents in the Novaya Zemlya Trough of the Kara Sea

Deepwater sedimentary bedforms in a mobile substrate terrain: Examples from the central Gulf of Mexico Basin

We have used high-resolution geophysical data to investigate depositional and erosional bedforms in two geomorphologic provinces of the deepwater central Gulf of Mexico Basin: (1) the Mad Dog and Atlantis areas in the Sigsbee Escarpment region and (2) the Holstein minibasin within the salt canopy in the slope. Multibeam bathymetry indicates that the seafloor relief in the study areas is highly irregular because it is influenced by the dynamic behavior of underlying salt bodies resulting in the development of diverse bathymetric features. Side-scan images reveal erosional furrows of different morphologies at the base of the Sigsbee Escarpment that are oriented subparallel to the escarpment. Wide and sinuous furrows overlie mass transport deposits (MTDs), whereas, in other areas along strike, narrow rectilinear furrows are found beneath MTDs. The furrow fields in the Sigsbee Escarpment are located within a large series of erosional features that are linked to the action of westward flowing bottom currents associated with topographic Rossby waves that manage to rework sediments at water depths up to 2000 m. The interaction between the bottom current flow and the seafloor is likely influenced by the MTD’s irregular top surface relief and lateral changes in the escarpment’s morphology resulting in the development of complex sinuous furrow morphologies. North of the escarpment, subbottom profiles indicate a series of buried sediment waves found in the southern rim of the Holstein minibasin. Sediment wave morphometry indicates wavelengths ranging from 116 to 339 m and wave heights between approximately 0.8 and 2.4 m. Sediment waves were likely formed by turbidity currents as they exited the minibasin. The vertical change in topographic relief from the minibasin to the salt high led to variations in flow thickness and flow velocity of turbidity currents passing over the minibasin’s open rim. Consequently, these changes in flow regime led to the formation of sediment waves.

Introduction to special section: Seismic interpretation of contourites and deep-water sediment waves

Introduction to special section: Seismic interpretation of contourites and deep-water sediment waves

Submarine landslide origin of a tsunami at the Black Sea coast: Evidence based on swath bathymetry and 3D seismic reflection data

Tsunami waves were observed along the Bulgarian Black Sea coastline on 7 May 2007. The maximum rise and fall of the sea level were 1.2 and 2.0 m, respectively, with wave oscillations between 4 and 8 min. At first, submarine landsliding and then later on atmospheric disturbance were suggested as the cause of the tsunami. Numerical modeling, assuming a landslide displacing 30–60 million m3 material on the slope with a thickness range of more than 20–40 m, could reproduce the main characteristics of the recorded tsunami. In this early model, the landslide initiated on the shelf at a water depth of 100 m with a runout of approximately 20 km into 1000 m water depth. Subsequent and recent numerical modeling suggested that the failure may have initiated on the slope, anywhere between 200 and 1500 m seafloor depth. The runout of the transported sediments in these latest model was at 1850 m water depth. Just a few years after the tsunami, OMV and its joint venture partners, TOTAL and Repsol, acquired modern deepwater data sets in the same area where the submarine landsliding was assumed to occur. These data sets included multibeam swath bathymetry area and 3D reflection seismic data. These data sets offer a possibility to establish the presence of speculative submarine landslide responsible for the tsunami, with its geometry and nature. Our results provide direct evidence for the occurrence of large nonseismic catastrophic sediment failures along the Bulgarian coast. In this study, we illustrate Quaternary submarine landslides on 3D seismic reflection data immediately below the one responsible for the 2007 event; we also briefly point out the potential interpretation pitfall related to sediment waves and mass transport complexes.

Morphodynamic Controls for Growth and Evolution of a Rubble Coral Island

Rubble islands are dynamic sedimentary features present on reef platforms that evolve under a variety of morphodynamic processes and controlling mechanisms. They provide valuable inhabitable land for small island nations, critical habitat for numerous species, and are threatened by climate change. Aiming to investigate the controlling mechanisms dictating the evolution of One Tree Island (OTI), a rubble island in the Southern Great Barrier Reef, we combined different remotely-sensed data across varying timescales with wave data extracted from satellite altimetry and cyclone activity. Our findings show that (1) OTI had expanded by 7% between 1978 and 2019, (2) significant gross planform decadal adjustments were governed by the amount, intensity, proximity, and relative position of cyclones as well as El Niño Southern Oscillation (ENSO) phases, and (3) the mechanisms of island growth involve rubble spits delivering and redistributing rubble to the island through alongshore sediment transport and wave overtopping. Frequent short-term monitoring of the island and further research coupling variations in the different factors driving island change (i.e., sediment availability, reef-wave interactions, and extreme events) are needed to shed light on the future trajectory of OTI and other rubble islands under a climate change scenario.