Secondary Recovery Research Articles

New Trends in Biosurfactants: From Renewable Origin to Green Enhanced Oil Recovery Applications.

Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. The injection into the reservoir of surface-active substances capable of reducing the surface tension between oil and the rock surface should favor its extraction with significant economic repercussions. However, the most commonly used surfactants in EOR are derived from petroleum, and their use can have negative environmental impacts, such as toxicity and persistence in the environment. Biosurfactants on the other hand, are derived from renewable resources and are biodegradable, making them potentially more sustainable and environmentally friendly. The present review intends to offer an updated overview of the most significant results available in scientific literature on the potential application of biosurfactants in the context of EOR processes. Aspects such as production strategies, techniques for characterizing the mechanisms of action and the pros and cons of the application of biosurfactants as a principal method for EOR will be illustrated and discussed in detail. Optimized concepts such as the HLD in biosurfactant choice and design for EOR are also discussed. The scientific findings that are illustrated and reviewed in this paper show why general emphasis needs to be placed on the development and adoption of biosurfactants in EOR as a substantial contribution to a more sustainable and environmentally friendly oil and gas industry.

Synthesis of colloidal silica nanofluid and assessment of its impact on interfacial tension (IFT) and wettability for enhanced oil recovery (EOR)

Ever-increasing global energy demand, from one hand and reduced oil initially in place in oil reservoirs due to production and reduced natural reservoir production capacity, on the other hand, has encouraged researchers to investigate different methods to improve and increase enhanced oil recovery (EOR) from oil reservoirs. One method is to employ nanotechnology in injected water, where nanoparticles could affect interfacial tension (IFT) between water and oil and wettability through properties, including high specific surface area and nanoparticle size. However, a major challenge in using nanoparticles in injected water is the instability of these particles in water, which ultimately reduces the efficiency of EOR. These particles cannot be stabilized through conventional methods at a large scale. In this study, stabilized silica nanoparticles were synthesized in the water phase using sodium silicate and sol–gel processes. The stability of this nanofluid was studied in seawater, and then its effect on IFT and changing wettability was examined. According to the results, seawater containing 40 times diluted nanofluid could obtain 41% reduced IFT and 40% alteration in wettability of carbonate core becoming more water-wet and ultimately 13.7% improved final oil recovery in secondary oil recovery and 8.3% improved final oil recovery in third EOR.

Compositional changes at neighborhood and stand scales during recovery of a tropical lowland rainforest after shifting cultivation on Hainan Island, China

Understanding compositional changes during secondary forest recovery is crucial for effective restoration efforts. While previous research has predominantly focused on shifts in species composition at the stand scale, this study delves into the recovery dynamics in three compositional aspects of location (neighbor distances), size (tree diameters), and species (tree species) at both stand and neighborhood scale. The investigation spans nine chronosequence plots within a tropical lowland rainforest ecosystem after shifting cultivation, including three each for young-secondary forests (18–30 years), old-secondary forests (60 years), and old-growth forests (without obvious human interference). The quantification of location, size, and species composition involved categorized neighbor distances (Near, Moderate, Far-distance), tree diameters (Small, Medium, Large-tree), and tree species (Pioneer, Intermediate, Climax-species) into three groups, respectively. Compositional changes at the stand scale (plot) were directly based on these groups, while at the neighborhood scale, assessment involved combination types of these groups within a neighborhood (comprising three adjacent trees). At the stand scale, neighbor distances shifted from Near to Moderate and Far, tree diameters transitioned from Small to Medium and Large, and tree species of Pioneer gave way to Climax. Meanwhile, at the neighborhood scale, there was a notable decline in the aggregations of Near-distance (N), Small-tree (S), and Pioneer-species (P), while the mixtures of Far and Moderate-distance (F-M), Large and Small-tree (L-S), and Climax and Intermediate-species (C–I) experienced a marked increase. The compositional change exhibited a recovery pattern, with the fastest recovery in neighbor distances, followed by tree diameters and tree species. Moreover, compositional recovery in tree diameters and tree species at the neighborhood scale generally lagged behind that at the stand scale. The study suggests that rapid restoration of secondary forest can be achieved by different targeted cutting according to the recovery stages, aimed at reduce the Pioneer-species, Small-tree and Near-distance in neighborhood. Our findings underscore that analyzing the compositional changes in three aspects at two scales not only provides a profound understanding of secondary forest recovery dynamics, but also offers valuable insights for guiding practices in the restoration of degraded forest ecosystems.

Modeling and semi-analytical solution for immiscible and miscible fingers formation during enhanced oil recovery

ABSTRACT The fingering phenomenon arises during the secondary and tertiary oil recovery processes when injected fluid (water, gases, nano/biomaterials, or polymer particles) shoots through a porous medium at a relative speed. Oil recovery is influenced by various factors including the fluid type, capillary pressure, permeability, and porous material structure. All these elements play crucial roles in determining the success and efficiency of the oil recovery process. Many scientists have debated the fingering phenomenon from different perspectives. Here, we developed mathematical models with and without considering mass flow rates of oil and water for an inclined oil layer flowing through a homogenous porous medium to generate immiscible fingers. Furthermore, a mathematical model of miscible viscous finger formation with carbonated water injection (flooding) during the enhanced oil recovery process (EOR) has been analyzed in this paper. To solve each of these mathematical models, we used the recently developed approach known as the Method of Directly Defining the inverse Mapping (MDDiM). We found approximate solutions to the nonlinear partial differential equations (PDEs), which describe each modeling of the fingering phenomenon in a homogeneous porous medium by incorporating gravitational effects for several types of flooding and discussed the effects of the saturation rate.

Prosedur Terkini bagi Kitar Semula Logam daripada Kenderaan Akhir Hayat (ELV) di Malaysia

In Malaysia, a large number of abandoned End-of-Life Vehicles (ELV) problems pose a concern due to a lack of adequate regulation and action, while in Japan, a recycling system has been built and legislation controlling ELV recycling has been approved. The purpose of this article was to identify and investigate the current ELV recycling procedures in Malaysia, with a focus on metal recovery. This research also attempted to identify and review the ELV metal recycling procedures in Japan, as well as to compare and contrast them with Malaysian practices. A case study was conducted to investigate the ELV metal recycling procedure used by recyclers in Malaysia, thereby producing an ELV recycling framework. Publications on ELV metal recycling from Malaysia, and Japan will assist in determining, by identifying the ELV metal recycling technique used, the disparity between these two countries. Japan's ELV recycling has long been recognized for its importance in secondary metal recovery and reducing ELV waste to the environment. The recovery of secondary resources, such as ferrous metals, non-ferrous metals, and precious metals, from the recycling of ELVs reduces reliance on primary resources. It has been proven that ELV recycling aids in the prevention and control of ELV development around the world.

Evaluating Factors Impacting Polymer Flooding in Hydrocarbon Reservoirs: Laboratory and Field-Scale Applications.

Polymer flooding is an enhanced oil recovery (EOR) method used to increase oil recovery from oil reservoirs beyond primary and secondary recovery. Although it is one of the most well-established methods of EOR, there are still continuous new developments and evaluations for this method. This is mainly attributed to the diverse polymers used, expansion of this method in terms of application, and the increase in knowledge pertaining to the topic due to the increase in laboratory testing and field applications. In this research, we perform a review of the factors impacting polymer flooding in both laboratory studies and field-based applications in order to create guidelines with respect to the parameters that should be included when designing a polymer flooding study or application. The main mechanism of polymer flooding is initially discussed, along with the types of polymers that can be used in polymer flooding. We then discuss the most prominent parameters that should be included when designing a polymer flooding project and, based on previous laboratory studies and field projects, discuss how these parameters impact the polymer itself and the flooding process. This research can provide guidelines for researchers and engineers for future polymer flooding research or field applications.

Polymer-Coated Nanoparticles and Pickering Emulsions as Agents for Enhanced Oil Recovery: Basic Studies Using a Porous Medium Model

Globally the overall oil recovery factors for primary and secondary recovery range from 35% to 45%, and a tertiary recovery method that can enhance the recovery factor by 10–30% could contribute to the energy supply. The use of nanoparticles in enhanced oil recovery (EOR) processes comprises an emerging and well-promising approach. Polymer-coated nanoparticles (PNPs) were synthesized through the free radical polymerization (FRP) of the monomers 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPSA) and dodecyl methacrylate (DMA) on the surface of acrylic-modified spherical silica nanoparticles. The obtained PNPs were characterized using Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). Dispersions of PNPs were prepared in salt (NaCl, CaCl2) aqueous solutions, the static oil/water interfacial tension were measured using the Du Nouy ring method, and changes caused based on the oil/water contact angle were recorded optically. The PNP dispersions were used to stabilize and characterize shear-thinning oil-in-water Pickering emulsions. The capacity of the PNP dispersions and Pickering emulsions to mobilize the trapped ganglia of viscous paraffin oil, which remained after successive tests of drainage and primary imbibition, was tested with visualization experiments of the secondary imbibition in a transparent glass-etched pore network. The synthesized SiO2-P(AMPSA-co-DMA) nanoparticles were stable even at high temperatures (~200–250 °C) and displayed excellent stability in aqueous dispersions at high ionic strengths with the presence of divalent cations, and their dispersions generated stable oil-in-water Pickering emulsions with a shear-thinning viscosity. The oil-recovery efficiency is maximized when the most viscous Pickering emulsion is selected, but if energy cost factors are also taken into account, then the less viscous Pickering emulsion is preferable.

LABORATORY INVESTIGATION OF OIL STRIPPING FROM CORE PORE SPACES BY SURFACTANT SPONTANEOUS IMBIBITION PROCESSES AT HIGH TEMPERATURE

Large amounts of oil are still trapped in the microscopic pore spaces of the rock during the primary and secondary recovery processes as a result of competition between the viscous forces and the capillary forces that arise from the interfacial tension (IFT) between the oil and water phases which causes the injected water to pass through the residual oils. To recover the remaining oils, the capillary pressure between the fluids must be significantly lowered by reducing the IFTs with surfactant. The selection of the best surfactant that is suitable for reservoir fluids and rocks in harsh reservoir conditions through laboratory studies is critical before conducting a field surfactant injection. Compatibility of surfactant with reservoir conditions such as reservoir temperature, high formation water salinity and rock absorption of surfactant molecules is a major challenge in the field surfactant injection. The best surfactant should be compatible with reservoir fluids and rocks and capable of increasing the efficiency of microscopic displacement and oil recovery factor. This investigation was aimed to provide valuable information about the recovery processes of oil stripping in microscopic pore spaces of core samples by spontaneous imbibition of surfactant molecules under high reservoir temperature conditions. The spontaneous imbibition processes were conducted in Amott imbibition cells. The process of the fluids interactions and oil recovery was observed and also recorded for further analysis and calculations. The results showed that non-ionic surfactants were more stable and performed better capability in stripping and recovering oil from core samples at high reservoir temperature.

Tlr4 Deletion Modulates Cytokine and Extracellular Matrix Expression in Chronic Spinal Cord Injury, Leading to Improved Secondary Damage and Functional Recovery.

Toll-like receptors (TLRs) play an important role in the innate immune response after CNS injury. Although TLR4 is one of the best characterized, its role in chronic stages after spinal cord injury (SCI) is not well understood. We examined the role of TLR4 signaling in injury-induced responses at 1 d, 7 d, and 8 weeks after spinal cord contusion injury in adult female TLR4 null and wild-type mice. Analyses include secondary damage, a range of transcriptome and protein analyses of inflammatory, cell death, and extracellular matrix (ECM) molecules, as well as immune cell infiltration and changes in axonal sprouting and locomotor recovery. Lack of TLR4 signaling results in reduced neuronal and myelin loss, reduced activation of NFκB, and decreased expression of inflammatory cytokines and necroptotic cell death pathway at a late time point (8 weeks) after injury. TLR4 null mice also showed reduction of scar-related ECM molecules at 8 weeks after SCI, accompanied by increase in ECM molecules associated with perineuronal nets, increased sprouting of serotonergic fibers, and improved locomotor recovery. These findings reveal novel effects of TLR4 signaling in chronic SCI. We show that TLR4 influences inflammation, cell death, and ECM deposition at late-stage post-injury when secondary injury processes are normally considered to be over. This highlights the potential for late-stage targeting of TLR4 as a potential therapy for chronic SCI.

An Experimental Study of Polymer Flooding to Enhance Oil Recovery

Experimental investigation of the impact of a synthetic polymer used to enhance oil recovery in an Egyptian oilfield was the goal of the current study. According to the findings of the current study, polymer solutions display non-Newtonian flow behavior under a variety of temperature, salinity, and shear rate conditions. The shear rate, salt level, temperature, and solution concentration all affect the apparent viscosities of polymer solutions. Studying how salinity and temperature affect how polymer solutions of various concentrations flow through porous media revealed that, up to a certain point, the mobility of the solutions increases with the flow rate, after which the mobility decreases with the flow rate. The mobility as a function of water saturation showed that during the tertiary recovery stage as compared to that during the secondary recovery stage, both the water mobility and the total mobility greatly reduced, and the oil mobility somewhat rose. The mobility analysis suggested that motion might be important in understanding how these processes increase oil recovery.

Study of imbibition phenomenon in homogeneous porous medium model for oil recovery with temporal-fractional approach

In this article, the phenomenon of countercurrent imbibition in a specific displacement method occurs within a dipping homogeneous porous medium. This phenomenon plays a vital role in the process of oil recovery, which motivates our analysis. To overcome the difficulties associated with the nonlinear partial differential equation governing the countercurrent imbibition phenomenon, we have been using two distinct methods: the natural transform decomposition method and the variational iteration transform method with their convergence analysis for solutions. These techniques give different perspectives and enable us to obtain approximate solutions. Notably, both the proposed methods demonstrate the potential for substantial production of oil during the secondary oil recovery process in the petroleum industry. The obtained results by the proposed methods show the efficiency in optimizing the oil recovery rate.

Impact of Methylene Blue on Enhancing the Hydrocarbon Potential of Early Cambrian Khewra Sandstone Formation from the Potwar Basin, Pakistan.

Significant amounts of hydrocarbon resources are left behind after primary and secondary recovery processes, necessitating the application of enhanced oil recovery (EOR) techniques for improving the recovery of trapped oil from subsurface formations. In this respect, the wettability of the rock is crucial in assessing the recovery and sweep efficiency of trapped oil. The subsurface reservoirs are inherently contaminated with organic acids, which renders them hydrophobic. Recent research has revealed the significant impacts of nanofluids, surfactants, and methyl orange on altering the wettability of organic-acid-contaminated subsurface formations into the water-wet state. This suggests that the toxic dye methylene blue (MB), which is presently disposed of in huge quantities and contaminates subsurface waters, could be used in EOR. However, the mechanisms behind hydrocarbon recovery using MB solution for attaining hydrophilic conditions are not fully understood. Therefore, the present work examines the impacts of MB on the wettability reversal of organic-acid-contaminated Khewra sandstone samples (obtained from the outcrop in the Potwar Basin, Pakistan) under the downhole temperature and pressure conditions. The sandstone samples are prepared by aging with 10-2 mol/L stearic acid and subsequently treated with various amounts of aqueous MB (10-100 mg/L) for 1 week. Contact angle measurements are then conducted under various physio-thermal conditions (0.1-20 MPa, 25-50 °C, and salinities of 0.1-0.3 M). The results indicate that the Khewra sandstone samples become hydrophobic in the presence of organic acid and under increased pressure, temperature, and salinity. However, the wettability changes from oil-wet to preferentially water-wet in the presence of various MB solutions, thus highlighting the favorable effects of MB on EOR from the Khewra sandstone formation. Moreover, the most significant change in wettability is observed for the Khewra sandstone sample that was aged using 100 mg/L MB. These results suggest that injecting MB into deep underground Khewra sandstone reservoirs may produce more residual hydrocarbons.

A Review on Pressure Transient Analysis in Multilayer Reservoir: South Iraq Case Study

Multilayer reservoirs are currently modeled as a single zone system by averaging the reservoir parameters associated with each reservoir zone. However, this type of modeling is rarely accurate because a single zone system does not account for the fact that each zone's pressure decreases independently. Pressure drop for each zone has an effect on the total output and would result in inter-flow and the premature depletion of one of the zones. Understanding reservoir performance requires a precise estimation of each layer's permeability and skin factor. The Multilayer Transient Analysis is a well-testing technique designed to determine formation properties in more than one layer, and its effectiveness over the past two decades has been demonstrated. In order to conduct MTA, a combination of rate profiles derived from production data and transient rate and pressure measurements at multiple surface rates is necessary. Numerous experimental and analytic approaches to calculating multilayer characteristics, performance, and flow behavior in multilayer systems have emerged. This technology was implemented at the Zubair oil field in southern Iraq. In the last four years, the number of wells producing under saturation pressure has been increased in the Zubair oil field, particularly for the Mishrif and Zubair reservoirs. In the design of secondary and tertiary recovery, the study of the reservoir in the form of an individual layer to determine the pressure, permeability, and damage of each layer with commingled formation is important. This research describes previously available methods, factors that affect Multilayer Transient Analysis an economic indicator of Multilayer Transient Analysis and a case study

Positive interactions in shaping neighborhood diversity during secondary forests recovery: Revisiting the classical paradigm

Secondary forests recovery, following disturbances, plays a pivotal role in ecosystem dynamics and biodiversity recovery. Given the rising frequency and intensity of anthropogenic disturbances within forest ecosystems, understanding the mechanisms underlying secondary succession is vital for the effective restoration and conservation of compromised ecosystems. In the classical secondary succession paradigm, early-arriving species are gradually replaced by their later-arriving counterparts. However, over time, valuable historical insights into the involvement of pioneer species become obscured and challenging to discern, particularly in community-scale studies. Consequently, this obscurity has predominantly directed contemporary research predominantly towards examining the consequences of species replacement by later-arriving counterparts during secondary succession. Concurrently, the mechanisms by which pioneer species facilitate or impede the establishment of diversity among later-arriving species remain insufficiently clarified. In this study, we established a 6-ha dynamic forest plot within a secondary forest that has undergone nearly four decades of restoration. Specifically, we utilized the individual species-area relationship (ISAR) framework to evaluate the neighborhood diversity structure of 49 evergreen and 20 deciduous species identified within our evergreen broad-leaved forest plot. Our findings indicate that deciduous tree species undergo a transition from diversity accumulator to repeller in diversity structuring as they progress through different life history stages. On the other hand, evergreen trees either engage in diversity accumulator or neutral. Through repeated plot surveys, we established a comprehensive dataset encompassing the mortality and regeneration of evergreen and deciduous tree species from 2014 to 2020. Spatial covariance models were employed to quantify the distinct effects of density dependence on deciduous and evergreen tree species. The results demonstrate significant negative density dependence mortality and self-thinning in deciduous species at all life history stages. Conversely, adult evergreen tree species facilitate the survival of their seedlings and saplings. In contrast to the classical paradigm that primarily focuses on the replacement of pioneer species by successor species, our findings reveal: (i) self-inhibition mechanisms that shape the neighborhood diversity spatial patterns among deciduous tree species, (ii) self-promotion or neutral mechanisms that influence the diversity spatial patterns of evergreen tree species, and (iii) early-arriving tree species that play a role in facilitating the establishment and diversity of late-arriving counterparts. These results not only signify the significant role of late-arriving species in the natural recovery of secondary forests but also propose that integrating the mechanisms of facilitation, inhibition, and neutral interactions into the classic forest succession paradigm could reshape our interpretation of interactions within plant communities across historical, current, and future timeframes. Such comprehension holds implications for forest management policies and conservation practices.

Evaluating rare-earth constraints on wind power development under China's carbon-neutral target

China proposed a target to achieve carbon neutrality before 2060. Wind power is crucial for mitigating climate change and achieving carbon neutrality. However, its development depends on the potential constraints of rare-earth elements. Therefore, first projecting the rare-earth demand for wind power equipment in the context of achieving carbon neutrality and identifying potential obstacles are necessary. However, the carbon-neutral pathway for China's power sector is unclear, let alone the corresponding rare-earth demand. Consequently, this study explores a potential cost-effective carbon-neutral pathway for China's power sector and quantifies the demand for rare-earth elements used for producing wind power equipment under different pathways, by integrating dynamic material flow analysis and a national energy technology model. The results showed that the rare-earth supply may be inadequate for wind power development in terms of achieving carbon neutrality in China, especially for dysprosium and terbium. To neutralise the carbon emissions of China's power sector, the cumulative rare-earth demand during 2021–2060 would be 222–434 kt, of which at most 1/3 could potentially be obtained by circular usage from end-of-life wind turbines. However, the existing low secondary recovery rate of rare-earth elements makes the available circular amounts very small. Shifting to a wind power market dominated by direct-drive turbines may increase the cumulative rare-earth demand by up to 34 %. Without material intensity reduction for the wind power technologies, an additional 38 % demand for rare-earth elements will occur, exacerbating the risk of shortage.

Causes of secondary forest loss in a lowland rainforest of Nigeria

The increasing human population which promotes the conversion of secondary forests into other land use types has resulted in the decrease of forest areas in Nigeria. This study examined the causes of secondary forest loss in Osho Forest Reserve, Nigeria. Changes in Land Use Land Cover (LULC) were assessed using Landsat 5 TM and Landsat 8 OLI/TC images for four timelines over a period of 38 years (1984, 2013, 2017 and 2022). Results showed an increase in area of plantations, bare land and farmland, leading to a decrease in secondary forest cover. Farmland increased from 731 ha to 859 ha at the rate of 3.7 ha yr-1, bare land increased from 314 ha to 523 ha at 5.5 ha yr-1, plantations increased from 1,105 ha to 1,495 ha at 10.3 ha yr-1,while secondary forest drastically reduced from 1,132 ha to 405 ha at 19.1 ha yr-1. At this rate, secondary forest is estimated to be lost in the study area by 2050.. Osho Forest Reserve requires immediate management interventions driven by updated laws and policies, silvicultural treatment, community engagement and ecosystem rehabilitation. In addition, implementation of sustainable forest management would enhance secondary forest recovery.

Nonzero-Sum Game-Based Voltage Recovery Consensus Optimal Control for Nonlinear Microgrids System.

Since most of the existing models based on the microgrids (MGs) are nonlinear, which could cause the controller oscillate, resulting in the excessive line loss, and the nonlinear could also lead to the controller design difficulty of MGs system. Therefore, this article researches the distributed voltage recovery consensus optimal control problem for the nonlinear MGs system with N -distributed generations (DGs), in the case of providing stringent real power sharing. First, based on the distributed cooperative control concept of multiagent systems and the critic neural networks (NNs), a novel distributed secondary voltage recovery consensus optimal control protocol is constructed via applying the backstepping technique and nonzero-sum (NZS) differential game strategy to realize the voltage recovery of island MGs. Meanwhile, the model identifier is established to reconstruct the unknown NZS games systems based on a three-layer NN. Then, a critic NN weight adaptive adjustment tuning law is proposed to ensure the convergence of the cost functions and the stability of the closed-loop system. Furthermore, according to Lyapunov stability theory, it is proven that all signals are uniform ultimate boundedness in the closed loop system and the voltage recovery synchronization error converges to an arbitrarily small neighborhood of the origin near. Finally, some simulation results in MATLAB illustrate the validity of the proposed control strategy.

Investigating microRNAs as biomarkers in disorders of consciousness: a longitudinal multicenter study

MicroRNAs (miRNAs) are involved in gene regulation and may affect secondary brain injury and recovery in patients with disorders of consciousness (DoC). This study investigated the role of five miRNAs (150-5p, 132-3p, 23b-3p, 451a, and 16-5p) in prolonged DoC. miRNA levels were assessed in serum samples from 30 patients with unresponsive wakefulness syndrome or minimally conscious state due to traumatic or hypoxic-ischemic brain injury (TBI, HIBI) at baseline (1–3 months) and 6 months post-injury. Patients’ diagnoses were determined using the Coma Recovery Scale revised, and functional outcomes were evaluated 6 months after injury with the Glasgow Outcome Scale Extended (GOSE) and the Functional Independence Measure (FIM). Compared to healthy controls, patients with TBI had lower levels of miRNAs 150-5p, 132-3p, and 23b-3p at baseline, while patients with HIBI had lower levels of miRNA 150-5p at baseline and 6 months post-injury and a reduction of miRNA 451a at baseline. Higher levels of miRNAs 132-3p and 23b-3p were associated with better outcomes in TBI patients as indicated by GOSE and FIM scores. This study highlights distinct miRNA dysregulated patterns in patients with prolonged DoC, dependent on etiology and post-injury time, and suggests that miRNAs 132-3p and 23b-3p may serve as prognostic biomarkers.

Laboratory Investigation on Enhanced Oil Recovery Using Local Alkaline –Polymer for Niger – Delta Region

Approximately sixty percent of crude oil still lay trapped in the reservoir even after primary and secondary recovery processes have been completed, hence the need for a method that further improves recovery. To increase oil recovery and encourage utilization of local content, locally source alkaline and polymer materials were used to improve oil recovery in this study. The local alkaline and polymer used are plantain peel ash and corn starch respectively. The efficiency of the plantain peel ash and corn starch solution were tested using different seven core samples. The core samples were individually flooded with brine (salt and water) for secondary recovery process and different concentrations of plantain peel ash and corn starch both in stand-alone and in combined form were used for tertiary recovery. The results obtained from the experimental work showed that sample-B5 with 0.2g of plantain peel ash and 0.2g of corn starch in 100ml of brine gave the highest cumulative recovery of 86% as to compare to samples B1 and B2 which has the cumulative recovery of 70% and 78% respectively. Sample-B7 which has the highest concentration of corn starch (0.4g/100ml) gave the lowest recovery of 65% due to polymer adsorption on the rock surfaces which alters the rock wettability. The assessment of formation damage was done by evaluating and determining the permeability change after tertiary flooding. The concentrations with plantain peel ash have reduced permeability change. These locally sourced materials can replace synthetic enhanced oil recovery (EOR) chemical when properly modified and refined, and they are also cheap and environmentally friendly.

The Effect of Different Mulches and Bed Sizes on Growth, Yield and Quality of Turmeric (Curcuma longa L.) Under the Mid-Hill Zone of Himachal Pradesh

The present investigation was carried out in the Department of Vegetable Science, Dr. YS Parmar University of Horticulture and Forestry, Nauni, Solan, Himachal Pradesh, India during kharif, May, 2020–January, 2021 to examine the effect of different mulches and bed sizes on the growth, yield and quality of turmeric. The trial was laid out in randomized complete block design (factorial) with 9 treatment combinations, including 3 mulches (silver-black mulching film, pine needles and dry grass) with 3-bed sizes (9×1 m2, 6×1 m2 and 3×1 m2), which were triplicated. Turmeric yield proved to be significantly affected by mulching materials with silver-black mulching film producing the highest yield (32.01 t ha-1) whereas pine needles produced the lowest yield (23.85 t ha-1). Rhizome length and breadth, the number of primary and secondary rhizomes, dry recovery, essential oil, oleoresin and curcumin content were some of the yield and quality characteristics that have been improved by the use of silver-black mulching film. Bed size also provided a significant effect on the yield of turmeric with the highest (29.03 t ha-1) in bed size 9×1 m2 whereas lowest in 3×1 m2 (25.75 t ha-1). A combination of silver-black mulching film and 9×1 m2 bed size provided the significantly highest turmeric yield (33.56 t ha-1). This study recommends that farmers in Himachal Pradesh’s mid-hill zone to produce turmeric using silver-black mulching film on beds measuring 9×1 m2 for better growth, yield and improved quality of turmeric.