The microstructural evolution and attendant strengthening mechanisms in two biocompatible alloy systems, the binary Ti-15Mo and the quaternary Ti-13Mo-7Zr-3Fe (TMZF), have been compared and contrasted in this paper. In the homogenized condition, while the Ti-15Mo alloy exhibited a single phase microstructure consisting of large beta grains, the TMZF alloy exhibited a microstructure consisting primarily of a beta matrix with grain boundary alpha precipitates and a low volume fraction of intra-granular alpha precipitates. On ageing the homogenized alloys at 600 degrees C for 4 h, both alloys exhibited the precipitation of refined scale secondary alpha precipitates homogeneously in the beta matrix. However, while the hardness of the TMZF alloy marginally increased, that of the Ti-15Mo alloy decreased substantially as a result of the ageing treatment. In order to understand this difference in the mechanical properties after ageing, TEM studies have been carried out on both alloys in the homogenized and homogenized plus aged conditions. The results indicate that the omega precipitates dissolve on ageing in case of the Ti-15Mo alloy, consequently leading to a substantial decrease in the hardness. In contrast, the omega precipitates do not dissolve on ageing in the TMZF alloy and the precipitation of the fine scale secondary alpha leads to increased hardness.