SEC-MALLS Analysis Research Articles

Caenorhabditis elegans telomere-binding proteins TEBP-1 and TEBP-2 adapt the Myb module to dimerize and bind telomeric DNA

Protecting chromosome ends from misrecognition as double-stranded (ds) DNA breaks is fundamental to eukaryotic viability. The protein complex shelterin prevents a DNA damage response at mammalian telomeres. Mammalian shelterin proteins TRF1 and TRF2 and their homologs in yeast and protozoa protect telomeric dsDNA. N-terminal homodimerization and C-terminal Myb-domain-mediated dsDNA binding are two structural hallmarks of end protection by TRF homologs. Yet our understanding of how Caenorhabditis elegans protects its telomeric dsDNA is limited. Recently identified C. elegans proteins TEBP-1 (also called DTN-1) and TEBP-2 (also called DTN-2) are functional homologs of TRF proteins, but how they bind DNA and whether or how they dimerize is not known. TEBP-1 and TEBP-2 harbor three Myb-containing domains (MCDs) and no obvious dimerization domain. We demonstrate biochemically that only the third MCD binds DNA. We solve the X-ray crystal structure of TEBP-2 MCD3 with telomeric dsDNA to reveal the structural mechanism of telomeric dsDNA protection in C. elegans. Mutagenesis of the DNA-binding site of TEBP-1 and TEBP-2 compromises DNA binding in vitro, and increases DNA damage signaling, lengthens telomeres, and decreases brood size in vivo. Via an X-ray crystal structure, biochemical validation of the dimerization interface, and SEC-MALS analysis, we demonstrate that MCD1 and MCD2 form a composite dimerization module that facilitates not only TEBP-1 and TEBP-2 homodimerization but also heterodimerization. These findings provide fundamental insights into C. elegans telomeric dsDNA protection and highlight how different eukaryotes have evolved distinct strategies to solve the chromosome end protection problem.

Contribution of Dynamic Rheology Coupled to FTIR and Raman Spectroscopies to the Real-Time Shaping Ability of a Hyperbranched Polycarbosilane.

In the field of non-oxide ceramics, the polymer-derived ceramic (PDC) approach appears to be very promising, especially for obtaining easily shaped and homogeneous materials in terms of structure and composition. However, in order to reach a suitable form during the process, it is often necessary to study the rheology of preceramic polymers while they are modified during polymerisation or crosslinking reactions. Given this need in the understanding of the real-time rheology of macromolecules during their synthesis, a rheometer coupled with both an infrared spectrometer and a Raman probe is described as a powerful tool for monitoring in situ synthesised polycarbosilanes. Indeed, this original device allows one to control the viscosity of a hyberbranched polycarbosilane from defined difunctional and tetrafunctional monomers. Meanwhile, it links this evolution to structural modifications in the macromolecular structure (molar masses, dispersity and conformation), based on SEC-MALS analyses, synchronised by the monomer conversion determined by using Raman and infrared spectroscopies, a common denominator of the aforementioned instrumental platform.

The impact of sugar alcohols and sucrose on the physical properties, long-term storage stability, and processability of fish gelatin gels

Fish gelatin is becoming a popular alternative to mammalian gelatins due to religious restrictions, cultural preferences, ecological, and ethical concerns. Warm water fish gelatins (WWFG), as opposed to gelatins from cold water fish species, have more similar physical properties, and hence represent an alternative, to mammalian gelatins albeit a lower sol/gel transition temperature and gel strength. In warm climates, WWFG gels may therefore exhibit reduced storage stability at temperatures above this transition temperature because of e.g., a more pronounced acid hydrolysis of the sol fraction. To improve the long-term storage stability of WWFG, gels were prepared with two different sugar alcohols, sorbitol and xylitol, and a non-reducing sugar, sucrose. The change in the sol/gel transition temperature, gelling and melting kinetics, and gel strength of the gels were analyzed using small amplitude oscillatory shear measurements. Short-term and long-term storage stability tests at ambient temperature, 30 °C and 40 °C indicated improved stability of gels with co-solutes without significant differences between the type of sugar alcohol or sucrose. The stability of the gels increased with increasing concentrations of sugar alcohols. The degree of hydrolysis of the gelatin in the gels were investigated using SEC-MALS analyses which supported the bulk rheology stability results. Using sucrose led to browning and high viscosity, which may pose challenges regarding the processability and industrial applications.

Efficient production of immunologically active Shigella invasion plasmid antigens IpaB and IpaH using a cell-free expression system

Shigella spp. invade the colonic epithelium and cause bacillary dysentery in humans. Individuals living in areas that lack access to clean water and sanitation are the most affected. Even though infection can be treated with antibiotics, Shigella antimicrobial drug resistance complicates clinical management. Despite decades of effort, there are no licensed vaccines to prevent shigellosis. The highly conserved invasion plasmid antigens (Ipa), which are components of the Shigella type III secretion system, participate in bacterial epithelial cell invasion and have been pursued as vaccine targets. However, expression and purification of these proteins in conventional cell-based systems have been challenging due to solubility issues and extremely low recovery yields. These difficulties have impeded manufacturing and clinical advancement. In this study, we describe a new method to express Ipa proteins using the Xpress+TM cell-free protein synthesis (CFPS) platform. Both IpaB and the C-terminal domain of IpaH1.4 (IpaH-CTD) were efficiently produced with this technology at yields > 200 mg/L. Furthermore, the expression was linearly scaled in a bioreactor under controlled conditions, and proteins were successfully purified using multimode column chromatography to > 95% purity as determined by SDS-PAGE. Biophysical characterization of the cell-free synthetized IpaB and IpaH-CTD using SEC-MALS analysis showed well-defined oligomeric states of the proteins in solution. Functional analysis revealed similar immunoreactivity as compared to antigens purified from E. coli. These results demonstrate the efficiency of CFPS for Shigella protein production; the practicality and scalability of this method will facilitate production of antigens for Shigella vaccine development and immunological analysis.Key points• First report of Shigella IpaB and IpaH produced at high purity and yield using CFPS• CFPS-IpaB and IpaH perform similarly to E. coli–produced proteins in immunoassays• CFPS-IpaB and IpaH react with Shigella-specific human antibodies and are immunogenic in mice.Graphical abstract

ALK2 Receptor Kinase Association with FKBP12.6 Is Structurally Conserved with the ALK2-FKBP12 Complex.

The immunophilin FKBP12 is a known inhibitor of type I BMP and TGF-β receptors that competes for binding with their substrate SMADs. FKBP12 and the close paralog FKBP12.6 additionally assemble with ryanodine receptors to control Ca2+ release. Binding of FKBP12.6 to BMP/TGF-β receptors has yet to be investigated, but appears plausible given its high sequence similarity to FKBP12. Here, we found that FKBP12.6 can assemble with BMP and TGF-β-family type I receptors, but not with type II receptors. Cellular immunoprecipitation confirmed similar binding of FKBP12 and FKBP12.6 to the BMP receptor ALK2 (ACVR1), a known target of mutations in the congenital syndrome fibrodysplasia ossificans progressiva (FOP), as well as the pediatric brain tumor diffuse intrinsic pontine glioma (DIPG). SEC-MALS analyses using purified proteins indicated a direct 1:1 interaction between FKBP12.6 and the receptor’s cytoplasmic domains. The 2.17 Å structure of this ALK2-FKBP12.6 complex bound to the inhibitor dorsomorphin showed FKBP12.6 binding to the GS domain of ALK2 in a manner equivalent to the FKBP12 complex, with ALK2 residues Phe198 and Leu199 extending into the FK506-binding pocket of FKBP12.6. These findings suggest a level of redundancy in FKBP-family regulation of BMP and TGF-β signaling.

The RING domain of TRIM69 promotes higher-order assembly.

Members of the TRIM protein family have been shown to inhibit a range of viral infections. Recently, TRIM69 was identified as a potent inhibitor of Vesicular stomatitis Indiana virus infection, with its inhibition being dependent upon multimerization. Using SEC-MALLS analysis, it is demonstrated that the assembly of TRIM69 is mediated through the RING domain and not the Bbox domain as has been shown for other TRIM proteins. Using X-ray crystallography, the structure of the TRIM69 RING domain has been determined to a resolution of 2.1 Å, the oligomerization interface has been identified and regions outside the four-helix bundle have been observed to form interactions that are likely to support assembly.

Heparin composition: calculation based on elemental analysis and NMR data

The analysis of many polysaccharides is often complicated due to the heterogeneity in their structures. A computer approach is presented exploiting the experimental data from elemental analysis and high-resolution NMR experiments to estimate the individual anhydro-unit ratio. Our approach is based on the fact that elemental composition of a particular type of saccharide is the same for saccharide units, connected by glycosidic bonds forming the polysaccharide chain, or for the individual saccharide anhydro structures complemented by the relevant amount of water molecules. From the possible structures generated, the structure is chosen by the computation with the best fit (“score”) to the elemental composition. The method was tested on a heparin pentasaccharide using the 1% deviation of HSQC-integrated limits at 5% water content. The optimal limits for evaluation of heparin in various ionic forms (Na+, Li+, or NH4+) for the computation input were found by the HSQC integration of the anomeric signals and anhydro unit ratios calculated based on elemental analysis, AAS, and SEC-MALS analysis. The results of heparin from different sources, and in various ionic environments, indicate that the presented methodology could be used as the complementary approach to other experimental analytical techniques of heparin and heparin sulfate.

SEC–MALLS analysis of ethylenediamine-pretreated native celluloses in LiCl/N,N-dimethylacetamide: softwood kraft pulp and highly crystalline bacterial, tunicate, and algal celluloses

Softwood and hardwood bleached kraft pulps (SBKP and HBKP, respectively) and highly crystalline native celluloses such as algal, tunicate, bacterial and cotton lint celluloses were dissolved in 8 % (w/v) LiCl/N,N-dimethylacetamide (DMAc) after ethylenediamine (EDA) pretreatment. Complete dissolution of SBKP and other highly crystalline native celluloses in 8 % LiCl/DMAc was achieved after solvent exchange from EDA to DMAc through methanol. Neutral sugar composition analysis showed no significant differences between the original and EDA-treated pulps. A combination of size-exclusion chromatography and multi-angle laser light scattering (SEC–MALLS) was used to analyze the cellulose solutions after dilution to 1 % (w/v) LiCl/DMAc. The 0.05 % (w/v) solutions of highly crystalline cellulose in 1 % (w/v) LiCl/DMAc contained entangled molecules, and therefore 0.025 % (w/v) cellulose solutions in 1 % (w/v) LiCl/DMAc were used in the SEC–MALLS analysis to obtain reliable conformation plots (or double-logarithmic plots of molecular mass vs. root-mean-square radius). All the cellulose samples except SBKP gave conformation plots with slope values of 0.56–0.57, showing that these cellulose molecules had random-coil conformations. In contrast, SBKP gave a slope value of 0.35, indicating that some branched structures were present in the high-molecular-mass fraction. Double-logarithmic plots of the reduced viscosities of the cellulose solutions in 1 % (w/v) LiCl/DMAc versus the molecular mass were linear, except for SBKP, also suggesting the presence of anomalous cellulose structures in SBKP.

Ring expansion-controlled radical polymerization: Synthesis of cyclic polymers and ring component quantification based on SEC–MALS analysis

We report a ring expansion vinyl polymerization producing cyclic polymers using a tetra(oxyethylene) (TOE)-tethered cyclic initiator for the nitroxide-mediated controlled radical polymerization (NMP). Styrene (St) was polymerized with the cyclic NMP initiator 1 in the bulk to produce polymer 2. Structural analyses of 2 were performed by a size exclusion chromatograph equipped with a multiangle laser light scattering (SEC–MALS) detector, focusing on the relationships between the z-averaged root-mean-square radii of gyration (〈S2〉z1/2) versus the molecular weights. The results proved that 2 would consist of ring components as a result of the ring expansion polymerizations and radical ring crossover reactions together with ring-opened linear components, in which the amount of ring components increased with the increasing molecular weights. The data also enabled the quantification that approximately 13–40wt% of the final polymer 2 could be identified as the ring species in the Mw range of 1×105–5×105gmol−1.

The Impact of Chain Length and Flexibility in the Interaction between Sulfated Alginates and HGF and FGF-2.

Alginate is a promising polysaccharide for use in biomaterials as it is biologically inert. One way to functionalize alginate is by chemical sulfation to emulate sulfated glycosaminoglycans, which interact with a variety of proteins critical for tissue development and homeostasis. In the present work we studied the impact of chain length and flexibility of sulfated alginates for interactions with FGF-2 and HGF. Both growth factors interact with defined sequences of heparan sulfate (HS) at the cell surface or in the extracellular matrix. Whereas FGF-2 interacts with a pentasaccharide sequence containing a critical 2-O-sulfated iduronic acid, HGF has been suggested to require a highly sulfated HS/heparin octasaccharide. Here, oligosaccharides of alternating mannuronic and guluronic acid (MG) were sulfated and assessed by their relative efficacy at releasing growth factor bound to the surface of myeloma cells. 8-mers of sulfated MG (SMG) alginate showed significant HGF release compared to shorter fragments, while the maximum efficacy was achieved at a chain length average of 14 monosaccharides. FGF-2 release required a higher concentration of the SMG fragments, and the 14-mer was less potent compared to an equally sulfated high-molecular weight SMG. Sulfated mannuronan (SM) was subjected to periodate oxidation to increase chain flexibility. To assess the change in flexibility, the persistence length was estimated by SEC-MALLS analysis and the Bohdanecky approach to the worm-like chain model. A high degree of oxidation of SM resulted in approximately twice as potent HGF release compared to the nonoxidized SM alginate. The release of FGF-2 also increased with the degree of oxidation, but to a lower degree compared to that of HGF. It was found that the SM alginates were more efficient at releasing FGF-2 than the SMG alginates, indicating a greater dependence on monosaccharide identity and charge orientation over chain flexibility and charge density.

A RepA-like protein from bacteriophage BFK20 is a multifunctional protein with primase, polymerase, NTPase and helicase activities

Phage BFK20 replication protein gp43 comprises an N-terminal prim-pol domain and a C-terminal domain similar to replicative helicases. We prepared and studied two recombinant proteins: gp43-1 containing both prim-pol and helicase domains, and gp43C with the helicase domain only. A SEC-MALS analysis indicated that gp43-1 forms a hexameric homooligomer. NTPase activity testing revealed that gp43-1 was able to hydrolyze a wide spectrum of NTPs, ATP the most efficiently. The ATPase activity of gp43-1 was strongly dependent on the presence of ssDNA in the reaction, but was low in the presence of dsDNA and in the absence of DNA. On the other hand, the ATPase activity of gp43C was very low regardless of the presence of DNA. The helicase activity of gp43-1 was detected using a fluorescence-based assay with a forked DNA substrate in the presence of ATP. However, no helicase activity could be detected for gp43C. We therefore conclude that the prim-pol domain is essential for the helicase and ssDNA-dependent ATPase activity of gp43-1.

SEC–MALLS analysis of wood holocelluloses dissolved in 8 % LiCl/1,3-dimethyl-2-imidazolidinone: challenges and suitable analytical conditions

The use of size-exclusion chromatography in combination with multi-angle laser-light scattering analysis (SEC–MALLS) can provide useful information pertaining to the molecular mass parameters of wood celluloses and hemicelluloses. When wood holocelluloses containing significant amounts of hemicelluloses were soaked in ethylenediamine (EDA) and subjected to sequential EDA-removal and solvent-exchange processes into 1,3-dimethyl-2-imidazolidinone (DMI) under suitable conditions, the resulting materials provided much more reliable molecular mass parameters when they were dissolved in LiCl/DMI and subjecting to SEC–MALLS analysis. Furthermore, the residual EDA molecules trapped in the EDA-treated holocelluloses could be removed by simply washing with methanol following the solvent-exchange process. The effect of the stirring time for the EDA-treated and solvent-exchanged eucalyptus holocellulose in 8 % (w/v) LiCl/DMI was investigated in terms of its impact on the molecular mass parameters of the high-molecular-mass cellulose fractions and found to have no impact for up to 5 months. The optimal EDA treatment and solvent-exchange conditions obtained for eucalyptus holocellulose were subsequently applied to various other wood holocelluloses, including Japanese cedar, ginkgo and birch, which gave characteristic SEC elution patterns together with the corresponding molecular mass parameters, depending on their hemicellulose contents and the number of cellulose/lignin/hemicellulose chemical linkages present in their high-molecular-mass cellulose fractions. The weight-average degrees of polymerization of the high-molecular-mass cellulose fractions in the wood holocelluloses ranged from 4400 to 6400, which were higher than those of cotton cellulose (2700) and bacterial cellulose (3100).

Silica-diblock fluoropolymer hybrids synthesized by surface-initiated atom transfer radical polymerization

Silica/diblock fluoropolymer hybrids SiO2-g-PMMA-b-P12FMA for coatings were synthesized by the silica surface-initiating atom transfer radical polymerization (SI-ATRP) of methylmethacrylate (MMA) and dodecafluoroheptyl methacrylate (12FMA). Silica surface initiator (SiO2-initiator) was obtained by 10–25 nm fumed silica particles grafted hydrosilylated undec-10-enyl, 2-bromo-2-methyl propionate with a density of 0.573 mmol g−1. The SI-ATRP approach in this paper displays the diagnostic criteria of controlled radical polymerization by the analysis of 1H NMR, 19F NMR and SEC-MALLS analysis, after comparing with the conventional initiator of ethyl 2-bromoisobutyrate (EBiB) for the E-PMMA-b-P12FMA diblock copolymer. Three mass ratios of SiO2-initiator/MMA/12FMA as 1/72.50/18.15, 1/72.50/45.38 and 1/181.26/18.15 were used to obtain the SiO2-g-PMMA-b-12FMA hybrids. The hybrids show 25–30 nm core–shell particles in CHCl3 solution composed of a P12FMA core and PMMA shell, but densely twined together as agglomerated particles. The PMMA-b-P12FMA shell grafted onto silica particles obviously increases the surface roughness of the film (50–500 nm), more than the E-PMMA-b-12FMA film (30 nm), and thereby contributes to the hydrophobic (112–118°) and oleophobic (45–78°) properties of the films. Increasing the P12FMA concentration (1/72.50/45.38) could result in stronger migration of the P12FMA segments onto the film surface, and therefore led to a lower surface free energy (10.97 mN m−1), increased advancing and receding for water contact angles (112° and 108°) and the highest cetane contact angles (74° and 70°), the lower water absorption and viscoelasticity, but a high thermostability at 420–450 °C.

Chemosynthesis of Poly(ε-lysine)-Analogous Polymers by Microwave-Assisted Click Polymerization

Poly(ε-lysine) (ε-PL)-analogous click polypeptides with not only similar α-amino side groups but also similar main chain to ε-PL were chemically synthesized for the first time through click polymerization from aspartic (or glutamic)-acid-based dialkyne and diazide monomers. With microwave-assisting, the reaction time of click polymerization was compressed into 30 min. The polymers were fully characterized by NMR, ATR-FTIR, and SEC-MALLS analysis. The deprotected click polypeptides had similar pK(a) value (7.5) and relatively low cytotoxicity as ε-PL and could be used as substitutes of ε-PL in biomedical applications, especially in endotoxin selective removal. Poly(ethylene glycol) (PEG)-containing alternating copolymers with α-amino groups were also synthesized and characterized. After deprotection, the polymers could be used as functional gene vector with PEG shadowing system and NCA initiator to get amphiphilic graft polymers.

Evaluation of ultrasonic atomization as a new approach to prepare ionically cross-linked chitosan microparticles

Ultrasonic atomization was evaluated as a new approach for the preparation of ionically cross-linked controlled-release chitosan microparticles loaded with theophylline as the model drug, using tripolyphosphate (TPP) as counter-ion. It was possible to nebulize both 2% and 3% (w/v) chitosan solutions as a function of their viscosity, usually not processed by employing the conventional nebulizer. The results of the chitosan molecular characterization using the SEC-MALS analysis revealed that ultrasonic atomization caused a certain depolymerization, probably due to the main chain scission of the 1,4-glycosidic bond; however, Fourier transform-infrared spectroscopy revealed the absence of other chemical modifications. The ultrasonic atomization allowed preparation of TPP cross-linked chitosan microparticles mostly ranging between 50 and 200 mum. As regards manufacturing parameters, the linking time and washing medium were found to affect the properties of the microparticles, while the stirring rate of the TPP solution did not show any influence. The evaluation of the formulation variables revealed that chitosan concentration strongly affected both the feasibility of the ultrasonic atomization and the drug release. All the microparticles showed an encapsulation efficiency of > 50 % and, after an initial burst effect, a controlled release of drug for 48 h. In conclusion, the ultrasonic atomization could be proposed as a robust and innovative single-step procedure with scale-up potential to successfully prepare ionically cross-linked chitosan microparticles.

Transglutaminase-induced cross-linking of vicilin-rich kidney protein isolate: Influence on the functional properties and in vitro digestibility

Abstract The covalent cross-linking of vicilin-rich protein isolate from kidney bean (KPI) by microbial transglutraminase (MTGase; at an enzyme-substrate ratio of 5.0 units per gram protein) was characterized by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) and size exclusion chromatography combined with multi-angle laser light scattering (SEC–MALLS). Effects of MTGase treatment on some functional properties and in vitro trypsin digestibility of KPI were evaluated. SDS–PAGE and SEC–MALLS analyses indicated that MTGase polymerized the vicilin component in KPI to form high molecular weight oligomers or biopolymers, and the cross-linking occurred among intermolecular and intramolecular subunits. MTGase treatment led to a significant decrease in total free SH content and an increase in surface hydrophobicity, suggesting unfolding of the vicilin molecules. Protein solubility, emulsifying activity index, and emulsion stability index of KPI were progressively decreased with increasing MTGase incubation time. Thermal stability and in vitro trypsin digestibility of the vicilin component were gradually and significantly increased. These results suggest that functional properties of vicilin-rich KPI could be negatively affected by the enzymatic cross-linking, while nutritional property might be markedly enhanced.

Thermosensitive Y‐Shaped Micelles of Poly(oleic acid‐Y‐N‐isopropylacrylamide) for Drug Delivery

A novel thermosensitive amphiphilic copolymer comprised of two hydrophobic poly(oleic acid) (POA) segments and one hydrophilic poly(N-isopropylacrylamide) (PNIPAAm) segment was designed and synthesized. The structure of the copolymer was confirmed as Y-shaped by FTIR, 1H NMR, and SEC-MALLS analysis. A cytotoxicity study shows that the P(OA-Y-NIPAAm) copolymer exhibits good biocompatibility. The copolymer may self-assemble into micelles in water, with the hydrophobic POA segments at the cores of micelles and the hydrophilic PNIPAAm segments as the outer shells. The resulting micelles demonstrate temperature sensitivity with a lower critical solution temperature (LCST) of 31.5 degrees C and a critical micelle concentration (CMC) of 12.6 mg L(-1). Transmission electron microscopy (TEM) shows that the micelles exhibit a nanospheric morphology within a narrow size range of approximately 10-30 nm. A study of controlled release reveals that the self-assembled micelles have great potential as drug carriers.

TEMPO-mediated Oxidation of Native Cellulose: SEC–MALLS Analysis of Water-soluble and -Insoluble Fractions in the Oxidized Products

Linter cellulose was suspended in water and oxidized by the NaClO/NaBr/2,2,6,6-tetramehylpiperidine-1-oxy radical (TEMPO) system at pH 10.5 (TEMPO-mediated oxidation), and the oxidized products were separated into several fractions by filtration and centrifugation, depending on their particle sizes and apparent water-solubility. The major fraction (>ca. 80 mass % of the original linter cellulose) is the filter paper-trapped fibers, which can form inter-fiber hemiacetal linkages when handsheets are prepared thereof. Size-exclusion chromatographic analysis with multi-angle laser light scattering detection (SEC–MALLS) of these fibrous fractions dissolved in 0.5% LiCl/N,N-dimethylacetamide (DMAc) showed that some depolymerization occurred on cellulose chains during the TEMPO-mediated oxidation. On the other hand, the apparently water-soluble fractions (<ca. 20 mass % of the original linter cellulose) in the TEMPO-oxidized linter cellulose consisted of small amounts of colloidal particles having the cellulose I crystal structure, which came off from linter cellulose by the TEMPO-mediated oxidation and were mixed in the apparently water-soluble fraction even after filtration using 0.45 μm membrane. The presence of such colloidal cellulose crystals in the water-soluble fractions of the TEMPO-oxidized linter cellulose brings about anomalous bimodal SEC-elution patterns and extremely large molecular-mass values calculated from the SEC–MALLS data. Truly water-soluble cellouronic acid and/or over-oxidized compounds having glucuronic acid and hexeneuronic acid units are also present in the water-soluble fractions.

PH‐responsive polyzwitterions: A comparative study of acrylamide‐based polyampholyte terpolymers and polybetaine copolymers

AbstractA comparative study of pH‐responsive polyzwitterions (PZs) with polyampholyte or polybetaine architectures was conducted with well‐defined model polymer systems. Low‐charge‐density PZs, including ampholytic terpolymers composed of acrylamide (AM), sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride and carboxybetaine copolymers composed of AM and 3‐(3‐acrylamidopropyldimethylammonio)propionate, were prepared via free‐radical polymerization in 0.5M NaCl to yield ter‐ and copolymers with random termonomer and comonomer distributions. Sodium formate was used as a chain‐transfer agent during the polymerizations to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distributions. The polymer compositions were determined via 13C‐NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na+ and Cl−. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering (SEC–MALLS); the polymer MWs ranged from 1.4 to 1.5 × 106 g/mol, corresponding to DPs of 1.6–1.9 × 104 repeat units, with all the polymers exhibiting PDIs less than or equal to 2.1. The intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship agreed with the intrinsic viscosities determined via low‐shear dilute‐solution viscometry. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (Rg–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the PZs. The Rg–M and [η]–M relationships and viscometric data revealed that under size exclusion chromatography conditions, the poly[acrylamide‐co‐3‐(3‐acrylamidopropyldimethylammonio)propionate] betaine copolymers had more open, random‐coil conformations and greater polymer–solvent interactions than the ampholytic poly[acrylamide‐co‐sodium 3‐acrylamido‐3‐methylbutanoate‐co‐(3‐acrylamidopropyl)trimethylammonium chloride] terpolymers. The pH‐ and salt‐responsive dilute‐solution viscosity behavior of the PZs was examined to assess the effects of the polymer structure and composition on the solution properties. The polyampholyte terpolymers had greater solution viscosities and more pronounced stimuli‐responsiveness than the polybetaine copolymers because of their stronger intramolecular interactions and increased chain stiffness. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 24–39, 2004

PH‐Responsive ampholytic terpolymers of acrylamide, sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride. I. Synthesis and characterization

AbstractLow‐charge‐density ampholytic terpolymers composed of acrylamide, sodium 3‐acrylamido‐3‐methylbutanoate (NaAMB), and (3‐acrylamidopropyl)trimethylammonium chloride were prepared via free‐radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. NaOOCH was used as a chain‐transfer agent during the polymerization to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distribution. The terpolymer compositions were obtained via 13C NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na+ and Cl−. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi‐angle laser light scattering (SEC–MALLS); the terpolymer MWs ranged from 1.3–1.6 × 106 g/mol, corresponding to DPs of 1.6–1.9 × 104 repeat units, with all terpolymers exhibiting PDIs of less than 2.0. Intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship were compared to intrinsic viscosities determined via low‐shear dilute‐solution viscometry and were found to agree rather well. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (Rg–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the terpolymers. The Rg–M and [η]–M relationships revealed that most of the terpolymers exhibited little or no excluded volume effects under size exclusion chromatography conditions. Potentiometric titration of terpolymer solutions in deionized water showed that the apparent pKa value of the poly[acrylamide‐co‐sodium 3‐acrylamido‐3‐methylbutanoate‐co‐(3‐acrylamidopropyl)trimethylammonium chloride] terpolymers increased with increasing NaAMB content in the terpolymers and increasing ratios of anionic monomer to cationic monomer at a constant terpolymer charge density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3236–3251, 2004