Combined Scanning Tunneling Microscopy Research Articles

On-Surface Synthesis of Ni-Porphyrin-Doped Graphene Nanoribbons

On-Surface Synthesis of Ni-Porphyrin-Doped Graphene Nanoribbons

Identification of Defects and the Origins of Surface Noise on Hydrogen–Terminated (100) Diamond

AbstractNear‐surface nitrogen vacancy centres are critical to many diamond‐based quantum technologies such as information processors and nanosensors. Surface defects play an important role in the design and performance of these devices. The targeted creation of defects is central to proposed bottom‐up approaches to nanofabrication of quantum diamond processors, and uncontrolled surface defects may generate noise and charge trapping which degrade shallow NV device performance. Surface preparation protocols may be able to control the production of desired defects and eliminate unwanted defects, but only if their atomic structure can first be conclusively identified. This work uses a combination of scanning tunnelling microscopy (STM) imaging and first‐principles simulations to identify several surface defects on H:C(100)—2 × 1 surfaces prepared using chemical vapour deposition (CVD). The atomic structure of these defects is elucidated, from which the microscopic origins of magnetic noise and charge trapping are determined based on the modeling of their paramagnetic properties and acceptor states. Rudimentary control of these deleterious properties is demonstrated through STM tip‐induced manipulation of the defect structure. Furthermore, the results validate accepted models for CVD diamond growth by identifying key adsorbates responsible for the nucleation of new layers.

Combining Nitrogen Doping and Vacancies for Tunable Resonant States in Graphite.

We investigate the combination of nitrogen doping and vacancies in highly ordered pyrolytic graphite (HOPG), to engineer defect sites with adjustable electronic properties. We combine scanning tunneling microscopy and spectroscopy and density functional theory calculations to reveal the synergistic effects of nitrogen and vacancies in HOPG. Our findings reveal a remarkable shift of the vacancy-induced resonance peak from an unoccupied state in pristine HOPG to an occupied state in nitrogen-doped HOPG. This shift directly correlates with the shift of the charge neutrality point resulting from the n-doping induced by substitutional nitrogen. These results open new avenues for defect engineering in graphite or graphene and achieving novel functionalities for chemical activity or electronic properties.

Digging Its Own Site: Linear Coordination Stabilizes a Pt1/Fe2O3 Single-Atom Catalyst.

Determining the local coordination of the active site is a prerequisite for the reliable modeling of single-atom catalysts (SACs). Obtaining such information is difficult on powder-based systems and much emphasis is placed on density functional theory computations based on idealized low-index surfaces of the support. In this work, we investigate how Pt atoms bind to the (11̅02) facet of α-Fe2O3; a common support material in SACs. Using a combination of scanning tunneling microscopy, X-ray photoelectron spectroscopy, and an extensive computational evolutionary search, we find that Pt atoms significantly reconfigure the support lattice to facilitate a pseudolinear coordination to surface oxygen atoms. Despite breaking three surface Fe-O bonds, this geometry is favored by 0.84 eV over the best configuration involving an unperturbed support. We suggest that the linear O-Pt-O configuration is common in reactive Pt-based SAC systems because it balances thermal stability with the ability to adsorb reactants from the gas phase. Moreover, we conclude that extensive structural searches are necessary to determine realistic active site geometries in single-atom catalysis.

Growth of an Fe buckled honeycomb lattice on Be(0001)

The growth of Fe on a clean Be(0001) surface is investigated on the atomic scale by a combined scanning tunneling microscopy and density functional theory study. At low Fe coverage, the nucleation of terraced nanoislands with a disordered surface is observed experimentally. Increasing the Fe coverage results in the growth of extended films exhibiting a well-ordered p(2×2) superstructure. Density functional theory is applied to investigate the growth of Fe on a Be(0001) surface from individual atoms to extended films. Our studies provide strong evidence for the formation of a buckled honeycomb Fe lattice that is embedded in two Be planes with Kagome and triangular symmetry, respectively.

Deposition temperature-mediated growth of helically shaped polymers and chevron-type graphene nanoribbons from a fluorinated precursor

Graphene nanoribbons (GNRs) of precise size and shape, critical for controlling electronic properties and future device applications, can be realized via precision synthesis on surfaces using rationally designed molecular precursors. Fluorine-bearing precursors have the potential to form GNRs on nonmetallic substrates suitable for device fabrication. Here, we investigate the deposition temperature-mediated growth of a new fluorine-bearing precursor, 6,11-diiodo-1,4-bis(2-fluorophenyl)-2,3-diphenyltriphenylene (C42H24F2I2), into helically shaped polymer intermediates and chevron-type GNRs on Au(111) by combining scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory simulations. The fluorinated precursors do not adsorb on the Au(111) surface at lower temperatures, necessitating an optimum substrate temperature to achieve maximum polymer and GNR lengths. We compare the adsorption behavior with that of pristine chevron precursors and discuss the effects of C-H and C-F bonds. The results elucidate the growth mechanism of GNRs with fluorine-bearing precursors and establish a foundation for future synthesis of GNRs on nonmetallic substrates.

LEED-IV analyses of tellurium adsorbate structures on iridium and gold surfaces

The determination of the configuration of atomic adsorbates on clean metal surfaces has been a key issue in surface science 60 years ago and still is today. We demonstrate that despite the prevalence of combined scanning tunneling microscopy and density functional theory studies of adsorbate systems the pitfalls are plentiful calling for accurate, reliable structure analyses that can be delivered by diffraction methods. We analyze and compare the ordered phases of Te on Ir(111), Ir(100), and Au(100) demonstrating the accuracy, the in-depth information and physical insight that can nowadays be obtained by quantitative low-energy electron diffraction structural analyses.

Unveiling nanoscale THz-STM imaging techniques on graphene nanoribbons with zigzag edge topology.

The development of near-field THz microscopes has transcended the diffraction limitation traditionally constraining THz super-resolution imaging, heralding a new era of precision. Notably, Terahertz combined scanning tunneling microscopy (THz-STM) has distinguished itself by achieving unparalleled spatial resolution alongside remarkable temporal precision. Despite the significant advancements in THz-STM imaging research, a thorough exploration of its unique imaging features remains elusive, particularly in resolving local electronic spectroscopy. This study methodically explores THz-STM imaging over atomically precise 6-zigzag-edged graphene nanoribbons (6-ZGNR) on Au(111), employing a constant-current mode. The investigation reveals that intense THz-driven electric fields can induce irreversible alterations to the occupied and unoccupied state densities of the 6-ZGNR. Utilizing these THz-modified nanoribbons, analyses of both THz-driven STM imaging and THz current imaging with an external lock-in amplifier are carried out, and experimental factors affecting their imaging qualities have been investigated. It is demonstrated that the imaging with an external lock-in amplified THz current signal accurately captures the local electronic spectroscopy variations at the nanoscale. What we believe is a novel imaging technique proficiently delineates the features on the Au(111) surface and the 6-ZGNR, showcasing superior performance over direct terahertz-driven STM imaging of the samples.

Challenges to extracting spatial information about double P dopants in Si from STM images

The design and implementation of dopant-based silicon nanoscale devices rely heavily on knowing precisely the locations of phosphorous dopants in their host crystal. One potential solution combines scanning tunneling microscopy (STM) imaging with atomistic tight-binding simulations to reverse-engineer dopant coordinates. This work shows that such an approach may not be straightforwardly extended to double-dopant systems. We find that the ground (quasi-molecular) state of a pair of coupled phosphorous dopants often cannot be fully explained by the linear combination of single-dopant ground states. Although the contributions from excited single-dopant states are relatively small, they can lead to ambiguity in determining individual dopant positions from a multi-dopant STM image. To overcome that, we exploit knowledge about dopant-pair wave functions and propose a simple yet effective scheme for finding double-dopant positions based on STM images.

Characterize and Mediate Assembly of Triptycenes on Au(111) Surface.

Herein, we report the assembly behavior of triptycenes with aldehyde (Trip-1) and amino (Trip-2) groups on pristine and iodine-passivated Au(111) surfaces by a combination of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and density functional theory (DFT) calculation. On Au(111) surface, Trip-1 forms long trimer chains and two-dimensional islands via aldehyde-aldehyde hydrogen bonding in one dimension and π-π stacking of adjacent benzene rings in the other dimension. In contrast, Trip-2 lies as individuals or in disorderly stacked islands. Trip-2 and Trip-1 can be mixed in an arbitrary ratio. And Trip-2 molecules disrupt the ordered self-assembly structure of Trip-1 due to the formation of stronger aldehyde-amino hydrogen bonding. DFT, XPS, and Raman spectra confirm the conformational difference of Trip-1 and -2, as well as the aldehyde-amino hydrogen bonding formation in Trip-1 and Trip-2 mixture. On the iodine-passivated Au(111) surface, Trip-1 forms single-molecule chains and a hexagonal closely packed structure due to iodine interlayer mediation. Trip-2 molecules disrupt the hexagonal closely packed structure of Trip-1.

Construction of Two-Dimensional Organometallic Coordination Networks with Both Organic Kagome and Semiregular Metal Lattices on Au(111).

Two-dimensional metal-organic networks (2D MONs) having heterogeneous coordination nodes (HCNs) could exhibit excellent performance in catalysis and optoelectronics because of the unbalanced electron distribution of the coordinating metals. Therefore, the design and construction of 2D MONs with HCNs are highly desirable but remain challenging. Here, we report the construction of 2D organometallic coordination networks with an organic Kagome lattice and a semiregular metal lattice on Au(111) via the in situ formation of HCNs. Using a bifunctional precursor 1,4-dibromo-2,5-diisocyanobenzene, the coordination of isocyano with Au adatom on a room-temperature Au(111) yielded metal-organic coordination chains with isocyano-Au-isocyano nodes. In contrast, on a high-temperature Au(111), a selective debromination/coordination cascade reaction occurred, affording 2D organometallic coordination networks with phenyl-Au-isocyano nodes. By combining scanning tunneling microscopy and density functional theory calculations, we determined the structures of coordination products and the nature of coordination nodes, demonstrating a thermodynamically favorable pathway for forming the phenyl-Au-isocyano nodes.

Formation of Supernarrow Borophene Nanoribbons

AbstractBorophenes have sparked considerable interest owing to their fascinating physical characteristics and diverse polymorphism. However, borophene nanoribbons (BNRs) with widths less than 2 nm have not been achieved. Herein, we report the experimental realization of supernarrow BNRs. Combining scanning tunneling microscopy imaging with density functional theory modeling and ab initio molecular dynamics simulations, we demonstrate that, under the applied growth conditions, boron atoms can penetrate the outermost layer of Au(111) and form BNRs composed of a pair of zigzag (2,2) boron rows. The BNRs have a width self‐contained to ∼1 nm and dipoles at the edges to keep them separated. They are embedded in the outermost Au layer and shielded on top by the evacuated Au atoms, free of the need for post‐passivation. Scanning tunneling spectroscopy reveals distinct edge states, primarily attributed to the localized spin at the BNRs’ zigzag edges. This work adds a new member to the boron material family and introduces a new physical feature to borophenes.

Formation of Supernarrow Borophene Nanoribbons.

Borophenes have sparked considerable interest owing to their fascinating physical characteristics and diverse polymorphism. However, borophene nanoribbons (BNRs) with widths less than 2 nm have not been achieved. Herein, we report the experimental realization of supernarrow BNRs. Combining scanning tunneling microscopy imaging with density functional theory modeling and ab initio molecular dynamics simulations, we demonstrate that, under the applied growth conditions, boron atoms can penetrate the outermost layer of Au(111) and form BNRs composed of a pair of zigzag (2,2) boron rows. The BNRs have a width self-contained to ∼1 nm and dipoles at the edges to keep them separated. They are embedded in the outermost Au layer and shielded on top by the evacuated Au atoms, free of the need for post-passivation. Scanning tunneling spectroscopy reveals distinct edge states, primarily attributed to the localized spin at the BNRs' zigzag edges. This work adds a new member to the boron material family and introduces a new physical feature to borophenes.

Electronic inhomogeneity and phase fluctuation in one-unit-cell FeSe films

One-unit-cell FeSe films on SrTiO3 substrates are of great interest owing to significantly enlarged pairing gaps characterized by two coherence peaks at ±10 meV and ±20 meV. In-situ transport measurement is desired to reveal novel properties. Here, we performed in-situ microscale electrical transport and combined scanning tunneling microscopy measurements on continuous one-unit-cell FeSe films with twin boundaries. We observed two spatially coexisting superconducting phases in domains and on boundaries, characterized by distinct superconducting gaps (Δ1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\Delta }_{1}$$\\end{document}~15 meV vs. Δ2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\Delta }_{2}$$\\end{document}~10 meV) and pairing temperatures (Tp1~52.0 K vs. Tp2~37.3 K), and correspondingly two-step nonlinear V~Iα\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$V \\sim {I}^{\\alpha }$$\\end{document} behavior but a concurrent Berezinskii–Kosterlitz–Thouless (BKT)-like transition occurring at TBKT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{{{{{{\\rm{BKT}}}}}}}$$\\end{document}~28.7 K. Moreover, the onset transition temperature Tconset\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{{{{{{\\rm{c}}}}}}}^{{{{{{\\rm{onset}}}}}}}$$\\end{document}~54 K and zero-resistivity temperature Tczero\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{{{{{{\\rm{c}}}}}}}^{{{{{{\\rm{zero}}}}}}}$$\\end{document}~31 K are consistent with Tp1 and TBKT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{{{{{{\\rm{BKT}}}}}}}$$\\end{document}, respectively. Our results indicate the broadened superconducting transition in FeSe/SrTiO3 is related to intrinsic electronic inhomogeneity due to distinct two-gap features and phase fluctuations of two-dimensional superconductivity.

Artificial kagome lattices of Shockley surface states patterned by halogen hydrogen-bonded organic frameworks

Artificial electronic kagome lattices may emerge from electronic potential landscapes using customized structures with exotic supersymmetries, benefiting from the confinement of Shockley surface-state electrons on coinage metals, which offers a flexible approach to realizing intriguing quantum phases of matter that are highly desired but scarce in available kagome materials. Here, we devise a general strategy to construct varieties of electronic kagome lattices by utilizing the on-surface synthesis of halogen hydrogen-bonded organic frameworks (XHOFs). As a proof of concept, we demonstrate three XHOFs on Ag(111) and Au(111) surfaces, which correspondingly deliver regular, breathing, and chiral breathing diatomic-kagome lattices with patterned potential landscapes, showing evident topological edge states at the interfaces. The combination of scanning tunnelling microscopy and noncontact atomic force microscopy, complemented by density functional theory and tight-binding calculations, directly substantiates our method as a reliable and effective way to achieve electronic kagome lattices for engineering quantum states.

Steering Electron-Induced Surface Reaction via a Molecular Assembly Approach.

Electrons not only serve as a "reactant" in redox reactions but also play a role in "catalyzing" some chemical processes. Despite the significance and ubiquitousness of electron-induced chemistry, many related scientific issues still await further exploration, among which is the impact of molecular assembly. In this work, microscopic insights into the vital role of molecular assembly in tweaking the electron-induced surface chemistry are unfolded by combined scanning tunneling microscopy and density functional theory studies. It is shown that the selective dissociation of a C-Cl bond in 4,4″-dichloro-1,1':3',1''-terphenyl (DCTP) on Cu(111) can be efficiently triggered by an electron injection via the STM tip into the unoccupied molecular orbital. The DCTP molecules are embedded in different assembly structures, including its self-assembly and coassemblies with Br adatoms. The energy threshold for the C-Cl bond cleavage increases as more Br adatoms stay close to the molecule, indicative of the sensitive response of the electron-induced surface reactivity of the C-Cl bond to the subtle change in the molecular assembly. Such a phenomenon is rationalized by the energy shift of the involved unoccupied molecular orbital of DCTP that is embedded in different assemblies. These findings shed new light on the tuning effect of molecular assembly on electron-induced reactions and introduce an efficient approach to precisely steer surface chemistry.

Nanoscale Chemical Probing of Metal-Supported Ultrathin Ferrous Oxide via Tip-Enhanced Raman Spectroscopy and Scanning Tunneling Microscopy.

Metal-supported ultrathin ferrous oxide (FeO) has attracted immense interest in academia and industry due to its widespread applications in heterogeneous catalysis. However, chemical insight into the local structural characteristics of FeO, despite its critical importance in elucidating structure-property relationships, remains elusive. In this work, we report the nanoscale chemical probing of gold (Au)-supported ultrathin FeO via ultrahigh-vacuum tip-enhanced Raman spectroscopy (UHV-TERS) and scanning tunneling microscopy (STM). For comparative analysis, single-crystal Au(111) and Au(100) substrates are used to tune the interfacial properties of FeO. Although STM images show distinctly different moiré superstructures on FeO nanoislands on Au(111) and Au(100), TERS demonstrates the same chemical nature of FeO by comparable vibrational features. In addition, combined TERS and STM measurements identify a unique wrinkled FeO structure on Au(100), which is correlated to the reassembly of the intrinsic Au(100) surface reconstruction due to FeO deposition. Beyond revealing the morphologies of ultrathin FeO on Au substrates, our study provides a thorough understanding of the local interfacial properties and interactions of FeO on Au, which could shed light on the rational design of metal-supported FeO catalysts. Furthermore, this work demonstrates the promising utility of combined TERS and STM in chemically probing the structural properties of metal-supported ultrathin oxides on the nanoscale.

Probe the Dynamic Adsorption and Phase Transition of Underpotential Deposition Processes at Electrode-Electrolyte Interfaces.

Electrochemical scanning tunneling microscopy (EC-STM) and electrochemical quartz crystal microbalance (E-QCM) techniques in combination with DFT calculations have been applied to reveal the static phase and the phase transition of copper underpotential deposition (UPD) on a gold electrode surface. EC-STM demonstrated, for the first time, the direct visualization of the disintegration of (√3 × √3)R30° copper UPD adlayer with coadsorbed SO42- while changing sample potential (ES) toward the redox Pa2/Pc2 peaks, which are associated with the phase transition between the Cu UPD (√3 × √3)R30° phase II and disordered randomly adsorbed phase III. DFT calculations show that SO42- binds via three oxygens to the bridge sites of the copper with sulfate being located directly above the copper vacancy in the (√3 × √3)R30° adlayer, whereas the remaining oxygen of the sulfate points away from the surface. E-QCM measurement of the change of the electric charge due to Cu UPD Faradaic processes, the change of the interfacial mass due to the adsorption and desorption of Cu(II) and SO42-, and the formation and stripping of UPD copper on the gold surface provide complementary information that validates the EC-STM and DFT results. This work demonstrated the advantage of using complementary in situ experimental techniques (E-QCM and EC-STM) combined with simulations to obtain an accurate and complete picture of the dynamic interfacial adsorption and UPD processes at the electrode/electrolyte interface.

Probing Catalytic Sites and Adsorbate Spillover on Ultrathin FeO2-x Film on Ir(111) during CO Oxidation.

The spatially resolved identification of active sites on the heterogeneous catalyst surface is an essential step toward directly visualizing a catalytic reaction with atomic scale. To date, ferrous centers on platinum group metals have shown promising potential for low-temperature CO catalytic oxidation, but the temporal and spatial distribution of active sites during the reaction and how molecular-scale structures develop at the interface are not fully understood. Here, we studied the catalytic CO oxidation and the effect of co-adsorbed hydrogen on the FeO2-x/Ir(111) surface. Combining scanning tunneling microscopy (STM), isotope-labeled pulse reaction measurements, and DFT calculations, we identified both FeO2/Ir and FeO2/FeO sites as active sites with different reactivity. The trilayer O-Fe-O structure with its Moiré pattern can be fully recovered after O2 exposure, where molecular O2 dissociates at the FeO/Ir interface. Additionally, as a competitor, dissociated hydrogen migrates onto the oxide film with the formation of surface hydroxyl and water clusters down to 150 K.

Bistability between π-diradical open-shell and closed-shell states in indeno[1,2-a]fluorene.

Indenofluorenes are non-benzenoid conjugated hydrocarbons that have received great interest owing to their unusual electronic structure and potential applications in nonlinear optics and photovoltaics. Here we report the generation of unsubstituted indeno[1,2-a]fluorene on various surfaces by the cleavage of two C-H bonds in 7,12-dihydroindeno[1,2-a]fluorene through voltage pulses applied by the tip of a combined scanning tunnelling microscope and atomic force microscope. On bilayer NaCl on Au(111), indeno[1,2-a]fluorene is in the neutral charge state, but it exhibits charge bistability between neutral and anionic states on the lower-workfunction surfaces of bilayer NaCl on Ag(111) and Cu(111). In the neutral state, indeno[1,2-a]fluorene exhibits one of two ground states: an open-shell π-diradical state, predicted to be a triplet by density functional and multireference many-body perturbation theory calculations, or a closed-shell state with a para-quinodimethane moiety in the as-indacene core. We observe switching between open- and closed-shell states of a single molecule by changing its adsorption site on NaCl.