Scanning Transmission X-ray Spectromicroscopy Research Articles

Characterization of hydrated magnesium carbonate materials with synchrotron radiation-based scanning transmission X-ray spectromicroscopy

Formation of hydrated magnesium carbonate (HMC) cement phases from the carbonation of brucite has been investigated using synchrotron radiation (SR) based scanning transmission X-ray microscopy (STXM) at Mg and O...

Synthesis, characterization, functional testing and ageing analysis of bifunctional Zn-air battery GDEs, based on α-MnO2 nanowires and Ni/NiO nanoparticle electrocatalysts

Electrically rechargeable alkaline zinc air batteries (RZAB) – currently still at the R&D stage –, have great potential for stationary, as well as prospectively mobile, electrochemical energy storage applications. Their chief appeal is that they are made of abundant, environmentally friendly, intrinsically safe, and cheap materials, with established recycling concepts and auspicious life-cycle costs. One of the key weak points of present-generation RZAB programs is the air gas-diffusion electrode (GDE). In fact, on the one hand, GDE fabrication and testing are generally based on poorly understood protocols, and, on the other hand, performance is challenged by efficiency and durability issues. This work is centred on the fabrication of a novel bifunctional GDE for the air side of RZABs, on the assessment of its electrochemical performance and on the identification of factors impacting its efficiency and durability. The electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are α-MnO2 nanowires and Ni/NiO nanoparticles, respectively. The composition of the active layer was optimized with rotating ring-disc electrode (RRDE) electrocatalysts tests. The GDEs were fabricated by spray-coating an ink, formulated with the electrocatalysts and the PTFE binder in an aqueous matrix. Fabrication and functional performance of GDEs – in pristine form and after ageing under realistic RZAB conditions – are rationalized on the basis of Scanning Electron Microscopy (SEM), Scanning Transmission X-ray SpectroMicroscopy (STXSM) at the Mn l-edge and Transmission Electron Microscopy (TEM) analyses. Imaging and spectral imaging disclosed the morphological and chemical-state evolution, brought about by electrochemical cycling. Special attention was devoted to the understanding of the role played by the presence of zincate in the electrolyte on the performance and ageing of the reversible air electrodes.

Scanning transmission X-ray spectromicroscopy: A nanotool to probe hematite nanorods for solar water splitting

We report a scanning transmission X-ray microscopy (STXM) study of hematite nanorods, prototypical photoanode used in solar water splitting. Hematite nanorods were obtained by hydrothermal growth from aqueous solutions using FeCl3 as precursor. Potentials for onset of water splitting are smaller using this synthesis method, compared to values reported for hematite photoanodes obtained by epitaxial growth. STXM revealed the presence of a hexahydrate iron chloride phase at the surface of the nanorods, which is linked to the low onset potential values. We detail the quantification approach that revealed the specific microstructure of individual hematite nanorods.

Chemical characterization of microplastic particles formed in airborne waste discharged from sewer pipe repairs.

Microplastic particles are of increasing environmental concern due to the widespread uncontrolled degradation of various commercial products made of plastic and their associated waste disposal. Recently, common technology used to repair sewer pipes was reported as one of the emission sources of airborne microplastics in urban areas. This research presents results of the multi-modal comprehensive chemical characterization of the microplastic particles related to waste discharged in the pipe repair process and compares particle composition with the components of uncured resin and cured plastic composite used in the process. Analysis of these materials employs complementary use of surface-enhanced Raman spectroscopy, scanning transmission X-ray spectro-microscopy, single particle mass spectrometry, and direct analysis in real-time high-resolution mass spectrometry. It is shown that the composition of the relatively large (100 μm) microplastic particles resembles components of plastic material used in the process. In contrast, the composition of the smaller (micrometer and sub-micrometer) particles is significantly different, suggesting their formation from unintended polymerization of water-soluble components occurring in drying droplets of the air-discharged waste. In addition, resin material type influences the composition of released microplastic particles. Results are further discussed to guide the detection and advanced characterization of airborne microplastics in future field and laboratory studies pertaining to sewer pipe repair technology.

Morphology and Charge Transport Properties of P(NDI2OD-T2)/Polystyrene Blends

While the strategy of blending commodity insulating polymers with conjugated polymers has been previously applied to modify the properties of organic field-effect transistors (OFETs), comprehensive studies on the evolution of morphology and OFET performance with film composition are scarce. In this contribution, films comprising the n-type semiconducting polymer P(NDI2OD-T2) and the insulating polymer polystyrene (PS) are explored in detail. In particular, the electrical properties and film morphology of blends with a P(NDI2OD-T2) concentration ranging from 0.125 to 100 wt % are studied. Two regimes characterized by distinct dependencies of device mobility as a function of P(NDI2OD-T2) content are observed: Above 12.5 wt % P(NDI2OD-T2), the OFET mobility exhibits a weak dependence on P(NDI2OD-T2) concentration despite the presence of strong lateral phase separation, while below 12.5%, the device mobility is observed to decrease strongly with decreasing P(NDI2OD-T2) concentration attributed to disrupted surface connectivity of the P(NDI2OD-T2) phase. UV–vis absorption spectroscopy and grazing incidence wide-angle X-ray scattering (GIWAXS) measurements indicate that the aggregation and crystalline packing are not strongly affected by the presence of PS. Atomic force microscopy and scanning transmission X-ray spectro-microscopy reveal lateral phase separation for blends with compositions of 87.5 to 25 wt % P(NDI2OD-T2). Enrichment of P(NDI2OD-T2) at the film surface is confirmed by near-edge X-ray absorption fine structure spectroscopy, with a high P(NDI2OD-T2) surface composition (>80 wt %) maintained down to an overall blend composition of 12.5 wt % P(NDI2OD-T2). The strong decrease in OFET mobility for P(NDI2OD-T2) concentration less than 25 wt % is attributed to a loss of P(NDI2OD-T2) surface connectivity at low P(NDI2OD-T2) loading. We also observe a transition from face-on to edge-on dominated configuration at low P(NDI2OD-T2) content with GIWAXS, consistent with an edge-on surface layer that persists down to monolayer surface coverage.

Identification and characterisation of individual nanoplastics by scanning transmission X-ray microscopy (STXM)

Nanoplastics (NP) are of environmental and human health concern. We tested a novel NP extraction method and scanning transmission X-ray spectro-microscopy (STXM) in combination with near-edge X-ray absorption fine-structure spectroscopy (NEXAFS) to image and identify individual NP in environmental and food matrices. We (1) discussed the potential of STXM compared to other methods potentially suitable for NP analysis, (2) applied the method on NP suspensions of eight of the most common polymers, (3) analyzed environmental water and soil samples spiked with NP and (4) characterized NP in tea water infused in plastic teabags and unspiked soil samples. Here we show that STXM has methodological advantages and that polymers give characteristic spectra, which allows NP identification in environmental and food matrices. For soils we deliver a visual and spectroscopic characterization of NP, proving their presence and highlighting their diversity. Thus, STXM, can be used for the detection and characterisation of NP in different types of matrices.

Multimodal x-ray and electron microscopy of the Allende meteorite.

Multimodal microscopy that combines complementary nanoscale imaging techniques is critical for extracting comprehensive chemical, structural, and functional information, particularly for heterogeneous samples. X-ray microscopy can achieve high-resolution imaging of bulk materials with chemical, magnetic, electronic, and bond orientation contrast, while electron microscopy provides atomic-scale spatial resolution with quantitative elemental composition. Here, we combine x-ray ptychography and scanning transmission x-ray spectromicroscopy with three-dimensional energy-dispersive spectroscopy and electron tomography to perform structural and chemical mapping of an Allende meteorite particle with 15-nm spatial resolution. We use textural and quantitative elemental information to infer the mineral composition and discuss potential processes that occurred before or after accretion. We anticipate that correlative x-ray and electron microscopy overcome the limitations of individual imaging modalities and open up a route to future multiscale nondestructive microscopies of complex functional materials and biological systems.

Electron beam damage of epoxy resin films studied by scanning transmission X-ray spectromicroscopy

Focused ion beam coupled with scanning electron microscopy (FIB-SEM) is a popular technique for advanced electron microscopy with applications such as, high-precision site-specific lamella sample preparation for transmission electron microscopy (TEM) and slice-and-view FIB 3-dimensional tomography. Damage caused by the electron imaging component of FIB-SEM may be compounded with damage from the ions during the ion milling process. There are known strategies for mitigating damage from ions and electrons (cryo-SEM, dose-control, voltage control), but the electron damage on common embedding resins for EM has not been explored in detail beyond their resistance to shape-change. The relationship between beam parameters and damage mechanisms remains unclear. Since we are relying on the physical, chemical and thermal stability of embedded samples during ion-beam milling, it is important to distinguish electron beam damage from ion beam damage. Scanning transmission X-ray microscopy (STXM) has been used for analyzing the electron beam radiation damage on polymer films by characterizing the chemical bonding changes. In this paper, we focus on the effect of beam voltage and electron dose on electron beam damage to epoxy resin thin films. Irradiated areas on polymer thin films were characterized by near edge X-ray absorption fine structure (NEXAFS) in STXM. We found that, even when using low current and voltage, the electron beam can still cause noticeable chemical changes within the polymer film. The degree of electron beam damage depends not only on the beam energy, but also on the amount of inelastic scattering occurring within the material, as determined by the sample thickness.

Effects of fullerene (C60), multi-wall carbon nanotubes (MWCNT), single wall carbon nanotubes (SWCNT) and hydroxyl and carboxyl modified single wall carbon nanotubes on riverine microbial communities.

Commercial production of nanoparticles (NP) has created a need for research to support regulation of nanotechnology. In the current study, microbial biofilm communities were developed in rotating annular reactors during continuous exposure to 500μgL(-1) of each nanomaterial and subjected to multimetric analyses. Scanning transmission X-ray spectromicroscopy (STXM) was used to detect and estimate the presence of the carbon nanomaterials in the biofilm communities. Microscopy observations indicated that the communities were visibly different in appearance with changes in abundance of filamentous cyanobacteria in particular. Microscale analyses indicated that fullerene (C60) did not significantly (p < 0.05) impact algal, cyanobacterial or bacterial biomass. In contrast, MWCNT exposure resulted in a significant decline in algal and bacteria biomass. Interestingly, the presence of SWCNT products increased algal biomass, significantly in the case of SWCNT-COOH (p < 0.05) but had no significant impact on cyanobacterial or bacterial biomass. Thymidine incorporation indicated that bacterial production was significantly reduced (p < 0.05) by all nanomaterials with the exception of fullerene. Biolog assessment of carbon utilization revealed few significant effects with the exception of the utilization of carboxylic acids. PCA and ANOSIM analyses of denaturing gradient gel electrophoresis (DGGE) results indicated that the bacterial communities exposed to fullerene were not different from the control, the MWCNT and SWNT-OH differed from the control but not each other, whereas the SWCNT and SWCNT-COOH both differed from all other treatments and were significantly different from the control (p < 0.05). Fluorescent lectin binding analyses also indicated significant (p < 0.05) changes in the nature and quantities of exopolymer consistent with changes in microbial community structure during exposure to all nanomaterials. Enumeration of protozoan grazers showed declines in communities exposed to fullerene or MWCNT but a trend for increases in all SWCNT exposures. Observations indicated that at 500μgL(-1), carbon nanomaterials significantly alter aspects of microbial community structure and function supporting the need for further evaluation of their effects in aquatic habitats.

Probing the mystery of Liesegang band formation: revealing the origin of self-organized dual-frequency micro and nanoparticle arrays.

Periodic precipitation processes in gels can result in impressive micro- and nanostructured patterns known as periodic precipitation (or Liesegang bands). Under certain conditions, the silver nitrate-chromium(vi) system exhibits the coexistence of two kinds of Liesegang bands with different frequencies. We now present that the two kinds of bands form independently on different time scales and the pH-dependent chromate(vi)-dichromate(vi) equilibrium controls the formation of the precipitates. We determined the spatial distribution and constitution of the particles in the bands using focused ion beam-scanning electron microscopy (FIB-SEM) and scanning transmission X-ray spectromicroscopy (STXM) measurements. This provided the necessary empirical input data to formulate a model for the pattern formation; a model that quantitatively reproduces the experimental observations. Understanding the pattern-forming process at the molecular level enables us to tailor the size and the shape of the bands, which, in turn, can lead to new functional architectures for a range of applications.

Soft X-ray spectromicroscopy for speciation, quantitation and nano-eco-toxicology of nanomaterials.

There is a critical need for methods that provide simultaneous detection, identification, quantitation and visualization of nanomaterials at their interface with biological and environmental systems. The approach should allow speciation as well as elemental analysis. Using the intrinsic X-ray absorption properties, soft X-ray scanning transmission X-ray spectromicroscopy (STXM) allows characterization and imaging of a broad range of nanomaterials, including metals, oxides and organic materials, and at the same time is able to provide detailed mapping of biological components. Thus, STXM offers considerable potential for application to research on nanomaterials in biology and the environment. The potential and limitations of STXM in this context are discussed using a range of examples, focusing on the interaction of nanomaterials with microbial cells, biofilms and extracellular polymers. The studies outlined include speciation and mapping of metal-containing nanomaterials (Ti, Ni, Cu) and carbon-based nanomaterials (multiwalled carbon nanotubes, C60 fullerene). The benefits of X-ray fluorescence detection in soft X-ray STXM are illustrated with a study of low levels of Ni in a natural river biofilm.

Oxidation is Key for Black Carbon Surface Functionality and Nutrient Retention in Amazon Anthrosols

Aims: Soil black carbon (BC) has been shown to possess large amounts of cation exchange sites and surface charge, and is viewed as a potential soil amendment to improve nutrient retention and for pollutant remediation. This study investigated the nanoscale distribution of reactive functional groups and the binding of cations on the surface of micron-size BC particles, identified the key processes, and explored the sources of surface functionality and their relative contribution to cation exchange capacity (CEC). Materials and Methods : Elemental microprobe and synchrotron-based Scanning Transmission X-ray Spectromicroscopy (STXM) coupled with Near Edge X-ray Absorption Fine Structure (NEXAFS) spectroscopy were used for nano-scale mapping of

Nano-scale investigation of the association of microbial nitrogen residues with iron (hydr)oxides in a forest soil O-horizon

Amino sugars in fungal cell walls (such as chitin) represent an important source of nitrogen (N) in many forest soil ecosystems. Despite the importance of this material in soil nitrogen cycling, comparatively little is known about abiotic and biotic controls on and the timescale of its turnover. Part of the reason for this lack of information is the inaccessibility of these materials to classic bulk extraction methods. To address this issue, we used advanced visualization tools to examine transformation pathways of chitin-rich fungal cell wall residues as they interact with microorganisms, soil organic matter and mineral surfaces. Our goal was to document initial micro-scale dynamics of the incorporation of 13C- and 15N-labeled chitin into fungi-dominated microenvironments in O-horizons of old-growth forest soils. At the end of a 3-week incubation experiment, high-resolution secondary ion mass spectrometry imaging of hyphae-associated soil microstructures revealed a preferential association of 15N with Fe-rich particles. Synchrotron-based scanning transmission X-ray spectromicroscopy (STXM/NEXAFS) of the same samples showed that thin organic coatings on these soil microstructures are enriched in aliphatic C and amide N on Fe (hydr)oxides, suggesting a concentration of microbial lipids and proteins on these surfaces. A possible explanation for the results of our micro-scale investigation of chemical and spatial patterns is that amide N from chitinous fungal cell walls was assimilated by hyphae-associated bacteria, resynthesized into proteinaceous amide N, and subsequently concentrated onto Fe (hydr)oxide surfaces. If confirmed in other soil ecosystems, such rapid association of microbial N with hydroxylated Fe oxide surfaces may have important implications for mechanistic models of microbial cycling of C and N.

Probing platinum degradation in polymer electrolyte membrane fuel cells by synchrotron X-ray microscopy

Synchrotron-based scanning transmission X-ray spectromicroscopy (STXM) was used to characterize the local chemical environment at and around the platinum particles in the membrane (PTIM) which form in operationally tested (end-of-life, EOL) catalyst coated membranes (CCMs) of polymer electrolyte membrane fuel cells (PEM-FC). The band of metallic Pt particles in operationally tested CCM membranes was imaged using transmission electron microscopy (TEM). The cathode catalyst layer in the beginning-of-life (BOL) CCMs was fabricated using commercially available catalysts created from Pt precursors with and without nitrogen containing ligands. The surface composition of these catalyst powders was measured by X-ray Photoelectron Spectroscopy (XPS). The local chemical environment of the PTIM in EOL CCMs was found to be directly related to the Pt precursor used in CCM fabrication. STXM chemical mapping at the N 1s edge revealed a characteristic spectrum at and around the dendritic Pt particles in CCMs fabricated with nitrogen containing Pt-precursors. This N 1s spectrum was identical to that of the cathode and different from the membrane. For CCM samples fabricated without nitrogen containing Pt-precursors the N 1s spectrum at the Pt particles was indistinguishable from that of the adjacent membrane. We interpret these observations to indicate that nitrogenous ligands in the nitrogen containing precursors, or decomposition product(s) from that source, are transported together with the dissolved Pt from the cathode into the membrane as a result of the catalyst degradation process. This places constraints on possible mechanisms for the PTIM band formation process.

Imaging nanostructures in organic semiconductor films with scanning transmission X-ray spectro-microscopy

Thin films of organic semiconducting materials are of increasing technological importance in optoelectronic devices such as light emitting diodes (LEDs), lasers, field effect transistors (FETs) and solar cells. However, the morphology of such films is complex, often displaying three dimensional composition structure or molecular alignment effects. The structure of the polymer film incorporated into a device can strongly affect its performance characteristics, e.g. via the connectedness of polymer domains and to the device electrodes, or due to anisotropic material properties due to molecular alignment.Scanning transmission X-ray spectro-microscopy (STXM) has been demonstrated to be an excellent tool for the study of organic materials due to its high spatial resolution (down to about 20nm) and strong contrast based on a variety of spectroscopic mechanisms. In particular, tuning the probing X-ray beam to resonances in the near edge X-ray absorption fine structure (NEXAFS) spectra provides a mechanism for molecular-structure based contrast which is a very powerful tool for studying blends of organic components. A further advantage of STXM is that strategic use of spectroscopic information allows quantitative compositional analysis of imaged areas. Recent work at the PolLux STXM has demonstrated two new developments in the imaging of thin organic films: simultaneous surface and bulk imaging via an additional channeltron electron detector, and molecular orientation mapping via anisotropic near edge resonances.

Characterization of Single-Walled Carbon Nanotubes by Scanning Transmission X-ray Spectromicroscopy: Purification, Order and Dodecyl Functionalization

The C 1s X-ray absorption spectra of several isolated bundles of single-walled carbon nanotubes (SWCNT) have been measured using scanning transmission X-ray microscopy. First the C 1s and O 1s spectra of a purified but unfunctionalized SWCNT were measured. The C 1s --> pi* transition at 285 eV exhibited almost as strong a dichroic effect (spectral dependence on orientation) as that found in multiwalled carbon nanotubes (Najafi; et al. Small 2008, 7, 2279-2285). Second, purified SWCNT were functionalized with dodecyl and then investigated by STXM. Spectral evidence for the dodecyl functionalization is presented and discussed in comparison to the X-ray absorption spectra of aliphatic hydrocarbons. Both orientation and functionalization mapping of an individual SWCNT bundle is demonstrated.

Solid supported multicomponent lipid membranes studied by x-ray spectromicroscopy

This article addresses the lateral organization of two-component lipid membranes deposited on a solid support with the addition of colloidal particles. The authors have applied synchrotron-based scanning transmission soft x-ray spectromicroscopy to image thin lipid layer patches with bound microspheres coated by a charged monolayer. The ability and current limits of scanning transmission x-ray spectromicroscopy to examine samples under physiologically relevant conditions in the presence of excess water have been tested. In particular, the authors have investigated a range of model lipids and have shown that these can be reproducibly identified from the near-edge x-ray absorption fine structure spectra at the carbon K absorption edge. Reference spectra were obtained based on a compact laser-driven plasma source, while the spectromicroscopy data were collected using synchrotron radiation at a lateral resolution of about 60 nm. The authors show that thin lipid layer sensitivity can indeed be reached under physiological conditions and that membrane colloid interaction as well as eventual lateral segregation of lipid components may be probed in the future by this technique.

Scanning Transmission X-ray Spectromicroscopy of Actinide Complexes

AbstractThe fundamental characterization and understanding of 5f electron behavior in actinide complexes is imperative to provide an enhanced basis for the rational and accelerated development of improved processes relevant to nuclear energy. Soft x-ray absorption spectroscopy utilizing the scanning transmission x-ray microscope (STXM) at the Advanced Light Source-Molecular Environmental Science (ALS-MES) Beamline 11.0.2 has been used to probe the electronic characteristics of a nitrogen donor ligand 2,6-Bis(2-benzimidazyl)pyridine (BBP) and its resulting U(IV) complex. The nitrogen K- and carbon K-edges have been collected from both ligand and uranium complex, as well as the uranium 4d-edge from the complex. Upon complexation, the light element absorption spectra change markedly and the uranium spectra from the complex is compared to the reference spectrum obtained from U(IV)Cl4. The evolution of the spectral features are described and interpreted within a simple conceptual framework. Based on spectral evidence alone, the uranium is bound through the pyridine-like nitrogens and the oxidation state of the uranium is consistent with a U(IV) species.

Three-dimensional chemical mapping by scanning transmission X-ray spectromicroscopy

Three-dimensional (3-d) chemical mapping using angle-scan tomography in a scanning transmission X-ray microscope is demonstrated. Apparatus, experimental procedures and data processing are presented and the 3-d spatial resolution is evaluated. The technique is illustrated using mapping of a low-density acrylate polyelectrolyte in and outside of polystyrene microspheres dispersed in water in a 4 microm-diameter microcapillary. The 3-d chemical visualization provides information about the microstructure that had not previously been observed.

Soft X-ray microscopy and spectroscopy at the molecular environmental science beamline at the Advanced Light Source

We present examples of the application of synchrotron-based spectroscopies and microscopies to environmentally relevant samples. The experiments were performed at the molecular environmental science beamline (11.0.2) at the Advanced Light Source, Lawrence Berkeley National Laboratory. Examples range from the study of water monolayers on Pt(1 1 1) single crystal surfaces using X-ray emission spectroscopy and the examination of alkali halide solution/water vapor interfaces using ambient pressure photoemission spectroscopy, to the investigation of actinides, river water biofilms, Al-containing colloids and mineral–bacteria suspensions using scanning transmission X-ray spectromicroscopy. The results of our experiments show that spectroscopy and microscopy in the soft X-ray energy range are excellent tools for the investigation of environmentally relevant samples under realistic conditions, i.e., with water or water vapor present at ambient temperature.