Scaled Quantum Mechanical Research Articles

Quantum chemical calculation (electronic and topologic) and experimental (FT-IR, FT-Raman and UV) analysis of isonicotinic acid N-oxide

In this work, the molecular conformation, vibrational and electronic analysis of isonicotinic acid N-oxide (iso-NANO) were presented in the ground state using experimental techniques (FT-IR, FT-Raman and UV) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-311++G(d,p) basis set. The geometry optimization and energies associated possible two conformers (Rot-I and Rot-II) were computed. The vibrational spectra were calculated and fundamental vibrations were assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and PQS program. The obtained structures were analyzed with the Atoms in Molecules (AIMs) methodology. The computational results diagnose the most stable conformer of iso-NANO as the Rot-I form. Total density of state (TDOS) and partial density of state (PDOS) and also overlap population density of state (OPDOS) diagrams analysis for the most stable conformer (Rot-I) were calculated using the same method. Thermodynamic properties (heat capacity, entropy and enthalpy) of the title compound at different temperatures were calculated. As a result, the optimized geometry and calculated spectroscopic data show a good agreement with the experimental results.

Structural and Vibrational Properties of the CF3XXCF3 (X = O, S, Se, Te) Molecules

AbstractThe structural and vibrational data for the CF3XXCF3 (X = O, S, Se, Te) molecules were compared using DFT quantum chemistry calculations. The experimental vibrational frequencies and their assignments to the different normal modes of vibration could be confirmed. The data was also used to define a scaled quantum mechanics force field and sets of derived internal force constants for each molecule. A linear relationship between the experimental X–X bond lengths and the corresponding force constants was found. Additionally, some calculations for the mixed molecule CF3SOCF3 were made.

Conformational analysis, spectroscopic study (FT-IR, FT-Raman, UV, 1H and 13C NMR), molecular orbital energy and NLO properties of 5-iodosalicylic acid

In this study, 5-iodosalicylic acid (5-ISA, C7H5IO3) is structurally characterized by FT-IR, FT-Raman, NMR and UV spectroscopies. There are eight conformers, Cn, n=1–8 for this molecule therefore the molecular geometry for these eight conformers in the ground state are calculated by using the ab-initio density functional theory (DFT) B3LYP method approach with the aug-cc-pVDZ-PP basis set for iodine and the aug-cc-pVDZ basis set for the other elements. The computational results identified that the most stable conformer of 5-ISA is the C1 form. The vibrational spectra are calculated DFT method invoking the same basis sets and fundamental vibrations are assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method with PQS program. Total density of state (TDOS) and partial density of state (PDOS) and also overlap population density of state (COOP or OPDOS) diagrams analysis for C1 conformer were calculated using the same method. The energy and oscillator strength are calculated by time-dependent density functional theory (TD-DFT) results complement with the experimental findings. Besides, charge transfer occurring in the molecule between HOMO and LUMO energies, frontier energy gap, molecular electrostatic potential (MEP) are calculated and presented. The NMR chemical shifts (1H and 13C) spectra are recorded and calculated using the gauge independent atomic orbital (GIAO) method. Mulliken atomic charges of the title molecule are also calculated, interpreted and compared with salicylic acid. The optimized bond lengths, bond angles and calculated NMR and UV, vibrational wavenumbers showed the best agreement with the experimental results.

A study of the molecular, vibrational, electronic and quantum chemical investigation of 2-methyl-1-vinylimidazole

The spectroscopic properties of 2-methyl-1-vinylimidazole (abbreviated as 2M1VIM) were examined by FT-IR, FT-Raman and NMR techniques. FT-IR and FT-Raman spectra were recorded in the region 4000–400cm−1 and 3500–50cm−1, respectively. The 1H and 13C NMR spectra were recorded in CDCl3. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional theory (DFT) employing B3LYP and LSDA methods with 6-311++G(d,p) basis set. The geometry of the molecule was fully optimized, vibrational spectra were calculated and fundamental vibration were assigned on the basis of potential energy distribution (PED) of the vibrational modes calculated with scaled quantum mechanical (SQM) method. The optimized structure of the compound was interpreted and compared with the reported experimental values. The observed vibrational ware numbers, absorption wavelengths and chemical shifts were compared with calculated values. The calculated HOMO and LUMO energies show that charge transfer occur within the molecule. As a result, the optimized geometry, and calculated spectroscopic data show a good agreement with the experimental results.

DFT calculations and experimental FT-IR, FT-Raman, NMR, UV–Vis spectral studies of 3-fluorophenylboronic acid

The spectroscopic (FT-IR, FT-Raman, 1H and 13C NMR, UV–Vis), structural, electronic and thermodynamical properties of 3-fluorophenylboronic acid (C6H4FB(OH)2), 3FPBA) were submitted by using both experimental techniques and theoretical methods (quantum chemical calculations) in this work. The experimental infrared and Raman spectra were obtained in the region 4000–400cm−1 and 3500–10cm−1, respectively. The equilibrium geometry and vibrational spectra were calculated by using DFT (B3LYP) with 6-311++G(d,p) basis set. The vibrational wavenumbers were also corrected with scale factor to take better results for the calculated data. The total energy distributions (TED) of the vibrational modes were performed for the assignments of the title molecule by using scaled quantum mechanics (SQM) method. The NMR chemical shifts (1H and 13C) were recorded in DMSO solution. The 1H and 13C NMR spectra were computed by using the gauge-invariant atomic orbital (GIAO) method, showing a good agreement with the experimental ones. The last one UV–Vis absorption spectra were analyzed in two solvents (ethanol and water), saved in the range of 200–400nm. In addition these, HOMO and LUMO energies, the excitation energies, density of states (DOS) diagrams, thermodynamical properties and molecular electrostatic potential surface (MEPs) were presented. Nonlinear optical (NLO) properties and thermodynamic features were performed. The experimental results are combined with the theoretical calculations using DFT calculations to fortification of the paper. At the end of this work, the results were proved our paper had been indispensable for the literature backing.

Spectroscopic (FT-IR and FT-Raman) investigation, first order hyperpolarizability, NBO, HOMO–LUMO and MEP analysis of 6-nitrochromone by ab initio and density functional theory calculations

The vibrational spectral analysis is carried out using FT-Raman and FT-IR spectroscopy in the range 3500–50cm−1 and 4000–400cm−1, respectively, for 6-nitrochromone (6NC). The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands are interpreted with the aid of structure optimization and normal coordinates force field calculation based on ab initio HF and DFT gradient calculations employing the HF/6-311++G(d,p) and B3LYP/6-311++G(d,p) basis set. Stability of the molecule has been analyzed using NBO analysis. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. Thermodynamic properties like entropy, heat capacity, zero-point energy and Mulliken’s charge analysis have been calculated for the 6NC. The complete assignments were performed on the basis of total energy distribution (TED) of the vibrational modes with scaled quantum mechanical (SQM) method. The MEP map shows the negative potential sites are on oxygen atoms as well as the positive potential sites are around the hydrogen atoms.

Spectroscopic (FT-IR, FT-Raman) and quantum mechanical studies of 3t-pentyl-2r,6c-diphenylpiperidin-4-one thiosemicarbazone

In this study, the molecular structure and vibrational spectra of 3t-pentyl2r,6c-diphenylpiperidin-4-one thiosemicarbazone (PDPOTSC) were studied. The ground-state molecular geometry was ascertained by using the density functional theory (DFT)/B3LYP method using 6-31++G(d,p) as a basis set. The vibrational (FT-IR and FT-Raman) spectra of PDPOTSC were computed using DFT/B3LYP and HF methods with 6-31++G(d,p) basis set. The fundamental vibrations were assigned on the basis of the total energy distribution (TED⩾10%) of the vibrational modes, calculated with scaled quantum mechanics (SQM) methods PQS program. The electrical dipole moment (μ) and first hyperpolarizability (βo) values have been computed using DFT/B3LYP and HF methods. The calculated result (βo) shows that the title molecule might have nonlinear optical (NLO) behavior. Atomic charges of C, N, S and molecular electrostatic potential (MEP) were calculated using B3LYP/6-31G++(d,p). The HOMO–LUMO energies were calculated and natural bonding orbital (NBO) analysis has also been carried out.

Experimental and theoretical studies on the vibrational spectra of trans-3-phenylacryloyl chloride

The infrared and Raman spectra of trans-3-phenylacryloyl chloride (TPC) were reported and compared with the theoretical results calculating at B3LYP/6-311++G (d, p) level. Both wavenumbers and intensities obtained from the experimental and theoretical spectra were in good agreement. A complete spectral assignment was made with the aid of potential energy distribution (PED) based on the scaled quantum mechanical (SQM) force field method. This study provided valuable insight for understanding the observed spectral features of TPC. Additionally, the HOMO–LUMO gap, molecular electrostatic potential (MEP) atomic charge distribution, and natural bond orbitals (NBO) were studied theoretically on the same basis set.

Molecular structure analysis and spectroscopic characterization of 9-methoxy-2H-furo[3,2-g]chromen-2-one with experimental (FT-IR and FT-Raman) techniques and quantum chemical calculations

Experimental and theoretical investigations on the molecular structure, electronic and vibrational characteristics of 9-methoxy-2H-furo[3,2-g]chromen-2-one (9M2HFC) were presented. The vibrational frequencies were obtained by DFT/B3LYP calculations employing 6-311++G(d,p) basis set, were compared with experimental FT-IR and FT-Raman spectral data. The FT-IR spectrum (4000–400cm−1) and FT-Raman spectrum (4000–100cm−1) in solid phase were recorded for 9M2HFC. The geometry of the title compound was fully optimized. Quantum chemical calculations of the equilibrium geometry, the complete vibrational assignments of wavenumbers using potential energy distribution (PED) calculated with scaled quantum mechanics infrared intensities, Raman activities of the title molecule was reported. HOMO–LUMO energies, molecular electrostatic potential, Mulliken population analysis on atomic charges, natural bond orbital (NBO) analysis, non linear optical behavior in terms of first order hyperpolarizability, and thermodynamic properties of the title molecule were carried out. Finally, simulated FT-IR and FT-Raman spectra showed good agreement with the observed spectra.

FT-IR, FT-Raman, NMR and UV–Vis spectra and DFT calculations of 5-bromo-2-ethoxyphenylboronic acid (monomer and dimer structures)

In this study, the Fourier Transform Infrared (FT-IR) and Fourier Transform Raman (FT-Raman) spectra of 5-bromo-2-ethoxyphenylboronic acid (5Br2EPBA) are recorded in the solid phase in the region 4000–400cm−1 and 3500–10cm−1, respectively. The 1H, 13C and DEPT nuclear magnetic resonance (NMR) spectra are recorded in DMSO solution. The UV–Vis absorption spectrum of 5Br2EPBA is saved in the range of 200–400nm in ethanol and water. The following theoretical calculations for monomeric and dimeric structures are supported by experimental results. The molecular geometry and vibrational frequencies in the ground state are calculated by using DFT methods with 6-31G(d,p) and 6-311G(d,p) basis sets. There are four conformers for the present molecule. The computational results diagnose the most stable conformer of 5Br2EPBA as Trans–Cis (TC) form. The complete assignments are performed on the basis of the total energy distribution (TED) of vibrational modes, calculated with scaled quantum mechanics (SQM) method in parallel quantum solutions (PQS) program. The 1H and 13C NMR chemical shifts of 5Br2EPBA molecule are calculated by using the Gauge Invariant Atomic Orbital (GIAO) method in DMSO and gas phase for monomer and dimer structures of the most stable conformer. Moreover, electronic properties, such as the HOMO and LUMO energies (by TD-DFT and CIS methods) and molecular electrostatic potential surface (MEPs) are investigated. Stability of the molecule arising from hyper-conjugative interactions, charge delocalization is analyzed using natural bond orbital (NBO) analysis. Nonlinear optical (NLO) properties and thermodynamic features are presented. All calculated results are compared with the experimental data of the title molecule. The correlation of theoretical and experimental results provides a detailed description of the structural and physicochemical properties of the title molecule.

Experimental (FT-IR, FT-Raman, UV–Vis, 1H and 13C NMR) and computational (density functional theory) studies on 3-bromophenylboronic acid

Structurally, boronic acids are trivalent boron-containing organic compounds that possess one alkyl substituent (i.e., C–Br bond) and two hydroxyl groups to fill the remaining valences on the boron atom. We studied 3-bromophenylboronic acid (3BrPBA); a derivative of boronic acid. This study includes the experimental (FT-IR, FT-Raman, 1H and 13CNMR, UV–Vis) techniques and theoretical (DFT-density functional theory) calculations. The experimental data are recorded, FT-IR (4000–400cm–1) and FT-Raman spectra (3500–10cm–1) in the solid phase. 1H and 13CNMR spectra are recorded in DMSO solution. UV–Vis spectrum is recorded in the range of 200–400nm for each solution (in ethanol and water). The theoretical calculations are computed DFT/B3LYP/6-311++G(d,p) basis set. The optimum geometry is also obtained from inside for possible four conformers using according to position of hydrogen atoms after the scan coordinate of these structures. The fundamental vibrations are assigned on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method and parallel quantum solutions (PQS) program. 1H and 13CNMR chemical shifts are racked on by using the gauge-invariant atomic orbital (GIAO) method. The time-dependent density functional theory (TD-DFT) is used to find HOMO and LUMO energies, excitation energies, oscillator strengths. The density of state of the studied molecule is investigated as total and partial density of state (TDOS and PDOS) and overlap population density of state (OPDOS or COOP) diagrams have been presented. Besides, frontier molecular orbitals (FMOs), molecular electrostatic potential surface (MEPs) and thermodynamic properties are performed. At the end of this work, the results are ensured beneficial for the literature contribution.

Synthesis, crystal growth, characterization and theoretical studies of 4-aminobenzophenonium picrate

Single crystals of 4-aminobenzophenonium picrate (4ABPP) were grown by slow evaporation of a mixed solvent system methanol–acetone (1:1,v/v) containing equimolar quantities of picric acid and 4-aminobenzophenone. The proton and carbon signals are confirmed by nuclear magnetic resonance spectroscopy. The various functional groups present in the molecule are identified by FT-IR analysis. Optimized geometry, first-order molecular hyperpolarizability (β), polarizability (α), bond length, bond angles and excited state energy from theoretical UV were derived by Hartree–Fock calculations. The complete assignment of the vibrational modes for 4-aminobenzophenonium picrate was performed by the scaled quantum mechanics force field (SQMFF) methodology using potential energy distribution. Natural bond orbital (NBO) calculations were employed to study the stabilities arising from charge delocalization and intermolecular interactions of 4ABPP. The atomic charge distributions of the various atoms present in 4ABPP are obtained by Mulliken charge population analysis. The as-grown crystal is further characterized by thermal and optical absorbance studies.

Molecular structure investigation of neutral, dimer and anion forms of 3,4-pyridinedicarboxylic acid: A combined experimental and theoretical study

In this study, the structural and vibrational analysis of 3,4-pyridinedicarboxylic acid (3,4-PDCA) are presented using experimental techniques as FT-IR, FT-Raman, NMR, UV and quantum chemical calculations. FT-IR and FT-Raman spectra of 3,4-pyridinedicarboxylic acid in the solid phase are recorded in the region 4000–400cm−1 and 4000–50cm−1, respectively. The geometrical parameters and energies of all different and possible monomer, dimer, anion−1 and anion−2 conformers of 3,4-PDCA are obtained from Density Functional Theory (DFT) with B3LYP/6-311++G(d,p) basis set. There are sixteen conformers (C1C16) for this molecule (neutral form). The most stable conformer of 3,4-PDCA is the C1 conformer. The complete assignments are performed on the basis of the total energy distribution (TED) of the vibrational modes calculated with scaled quantum mechanics (SQM) method. 1H and 13C NMR spectra are recorded and the chemical shifts are calculated by using DFT/B3LYP methods with 6-311++G(d,p) basis set. The UV absorption spectrum of the studied compound is recorded in the range of 200–400nm by dissolved in ethanol. The optimized geometric parameters were compared with experimental data via the X-ray results derived from complexes of this molecule. In addition these, molecular electrostatic potential (MEP), thermodynamic and electronic properties, HOMO–LUMO energies and Mulliken atomic charges, are performed.

Infrared, Raman and NMR spectra, conformational stability and vibrational assignment of 7,8-Dihydroxy-4-Methylcoumarin

We report a combined some (infrared, Raman and NMR) spectroscopic and quantum chemistry study on 7,8-Dihydroxy-4-Methylcoumarin molecule (78D4MC). The Raman and IR spectra of 78D4MC molecule were recorded and analyzed in the region 3500–50cm−1 and 4000–400cm−1, respectively. Potential energy scans were performed at the MMFF level of theory. All possible conformers, which are results at the MMFF level theory, were re-computed at the B3LYP functional with cc-pVDZ basis set. The optimized geometrical parameters, harmonic vibrational wavenumbers and NMR chemical shifts of the most stable conformer were calculated at the B3LYP/6-311G(d,p), cc-pVTZ and cc-pVQZ level in the proximity of the isolated molecule. DFT calculations were combined with Pulay’s scaled quantum mechanics force field (SQMFF) methodology in order to fit the theoretical wavenumbers to the experimental ones.

Comparative vibrational spectroscopic studies, HOMO–LUMO, NBO analyses and thermodynamic functions of p-cresol and 2-methyl-p-cresol based on DFT calculations

In the present study structural properties of p-cresol, and 2-methoxy-p-cresol have been studied by using B3LYP/cc-pvdz and B3PW91/cc-pvdz of Density Functional Theory (DFT) utilizing Becke three exchange functional and Lee Yang Paar correlation functional. The Fourier transform infrared and Fourier transform Raman spectra of title molecules were recorded (solid phase). Optimized geometry, harmonic vibrational frequencies and various thermodynamic parameters of the title compounds were calculated with B3LYP/cc-pvdz, and B3PW91/cc-pvdz basis sets. Non-linear optical (NLO) behavior of the p-cresol and 2-methoxy-p-cresol were investigated by determining of electric dipole moment, polarizability α, and hyperpolarizability β using the above mentioned basis sets. The molecular properties such as ionization potential, electronegativity, chemical potential, electrophilicity have been deduced from HOMO–LUMO analysis employing the same basis sets. A detailed interpretation of the infrared and Raman spectra of title molecules were reported. UV spectrum was measured in different solvent. The energy and oscillator strength are calculated by Time Dependant Density Functional Theory (TD-DFT) results. The calculated HOMO and LUMO energies also confirm that charge transfer occurs within the molecule. The complete assignments were performed on the basis of the potential energy distribution (PED) of vibrational modes, calculated with scaled quantum mechanics (SQM) method. Finally the theoretical FT-IR, FT-Raman, and UV spectra of the title molecules have also been constructed.

Structural and vibrational investigation on species derived from the cyclamic acid in aqueous solution by using HATR and Raman spectroscopies and SCRF calculations

In this study, aqueous solutions at different molar concentrations of sodium cyclamate in water were completely characterized by HATR (Horizontal Attenuated Total Reflectance) and Raman spectroscopies. The theoretical structures of cyclamate ion, the zwitterionic and neutral forms of the cyclamic acid and its dimer were optimized in gas and aqueous solution phases by using the hybrid B3LYP/6-31G* method. The solvent effects for the four species in aqueous solutions were simulated by using self-consistent reaction field (SCRF) calculations employing the integral equation formalism variant (IEFPCM) model. The complete assignments of the vibrational spectra of all the forms of cyclamic acid were performed taking into account the factor group analysis with the Scaled Quantum Mechanics Force Field (SQMFF) methodology. The existence of the zwitterionic and neutral forms of the cyclamic acid and its dimer in a solution of cyclamate in water is evidenced by characteristic bands in the HATR and Raman spectra. The dimerization of cyclamate in aqueous solution was previously reported by conductimetric method. The natural population analysis (NPA) and Merz–Kollman (MK) charges, molecular electrostatic potential (MEP), natural bond orbital (NBO) and atoms in molecules (AIM) calculations predict for all the species the principal donor and acceptor sites for the H bonds formation in aqueous solution. The SQM force fields for the cyclamate ion, the zwitterionic and neutral species of the cyclamic acid were obtained and their corresponding force constants in both phases were reported. Additionally, the solvation energies for those species were reported.

Vibrational (FT-IR and FT-Raman), electronic (UV–Vis), NMR (1H and 13C) spectra and reactivity analyses of 4,5-dimethyl-o-phenylenediamine

The structure of 4,5-dimethyl-o-phenylenediamine (C8H12N2, DMPDA) was investigated on the basis of spectroscopic data and theoretical calculations. The sterochemical structure was determined by FT-IR, FT-Raman, UV, 1H and 13C NMR spectra. An experimental study and a theoretical analysis were associated by using the B3LYP method with Gaussian09 package program. FT-IR and FT-Raman spectra were recorded in the region of 4000–400cm−1 and 4000–10cm−1, respectively. The vibrational spectra were calculated by DFT method and the fundamental vibrations were assigned on the basis of the total energy distribution (TED), calculated with scaled quantum mechanics (SQM) method with Parallel Quantum Solutions (PQS) program. The UV absorption spectrum of the compound that dissolved in ethanol solution were recorded in the range of 190–400nm. Total density of state (TDOS) and partial density of state (PDOS) of the DMPDA in terms of HOMOs and LUMOs were calculated and analyzed. Chemical shifts were reported in ppm relative to tetramethylsilane (TMS) for 1H and 13C NMR spectra. The compound was dissolved in dimethyl sulfoxide (DMSO). Also, 1H and 13C chemical shifts calculated using the gauge independent atomic orbital (GIAO) method. Mullikan atomic charges and other thermo-dynamical parameters were investigated with the help of B3LYP (DFT) method using 6-311++G** basis set. On the basis of the thermodynamic properties of the title compound at different temperatures have been carried out, revealing the correlations between heat capacity (C), entropy (S), enthalpy changes (H) and temperatures. The optimized bond lengths, bond angles, chemical shifts and vibrational wavenumbers showed the best agreement with the experimental results.

Experimental and computational study on 2,2′-[(1E,2E)-hydrazine-1,2-diylidenedi(1E)eth-1-yl-1-ylidene]diphenol and its Ni(II), Pt(II), Pd(II) complexes

2,2′-[(1E,2E)-hydrazine-1,2-diylidenedi(1E)eth-1-yl-1-ylidene]diphenol and its dimeric, binuclear Ni(II), Pd(II) and Pt(II) metal complexes were synthesized. Hydrazine derivative and its complexes were characterized by elemental analyses, LC-MS, IR, electronic spectra, 1H and 13C NMR spectra, conductivity and magnetic measurements. 1H and 13C shielding tensors for crystal structure were calculated with GIAO/DFT/B3LYP/6-311++G(d,p) methods in CDCl3. The vibrational band assignments were performed at B3LYP/6-311++G(d,p) theory level combined with scaled quantum mechanics force field (SQMFF) methodology. The antibacterial activities of synthesized compounds were studied against some Gram-positive and Gram-negative bacteria by using the microdilution and disk diffusion method. As the antibacterial activity results evidently show, the compound possessed a broad spectrum of activity against the tested bacteria.

Ab initio/DFT calculations of butyl ammonium salt of O,O′-dibornyl dithiophosphate

O,O′-dibornyl dithiophosphete has been synthesized by the reaction of P2S5 and borneol in toluene. Fourier Transform Infrared spectra (FT-IR) of the title compound are measured. The molecular geometry, vibrational frequencies, infrared intensities and NMR spectrum of the title compound in the ground state have been calculated by using the density functional theory (DFT) and ab initio Hartree–Fock (HF) methods with the basis set of 6-31G(d). The computed bond lengths and bond angles show the good agreement with the experimental data. Moreover, the vibrational frequencies are calculated and the scaled values have been compared with experimental FT-IR spectra. Assignments of the vibrational modes are made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. The observed and calculated FT-IR and NMR spectra are in good agreement with each other.

Vibrational spectra, monomer, dimer, NBO, HOMO, LUMO and NMR analyses of trans-4-hydroxy-l-proline

This work presents the characterization of trans-4-hydroxy-l-proline (abbreviated as THLP) by quantum chemical calculations and spectral techniques. The spectroscopic properties were investigated by FT-IR, FT-Raman and 1H and 13C nuclear magnetic resonance (NMR) techniques. The FT-IR (4000–400cm−1) and FT-Raman (3500–10cm−1) spectra in the solid phase were recorded for THLP. The 1H and 13C NMR spectra were recorded in DMSO solution. The energies of THLP are obtained for all the eight conformers form density functional theory (DFT) with 6-311++G(d,p) basis set calculations. From the computational results, C1 conformer is identified as the most stable conformer of THLP. The theoretical wavenumbers were scaled and compared with experimental FT-IR and FT-Raman spectra. The complete assignments were performed on the basis of the experimental results and potential energy distribution (PED) of the vibrational modes, calculated with scaled quantum mechanical (SQM) method in terms of fundamental modes. The values of the total dipole moment (μ) and the first order hyperpolarizability (β) of the investigated compound were computed using B3LYP/6-311++G(d,p) calculations. The calculated HOMO–LUMO energies reveal charges transfer occurs within the molecule. The isotropic chemical shift computed by 1H and 13C NMR chemical shifts of the THLF, calculated using the gauge invariant atomic orbital (GIAO) method also shows good agreement with experimental observations.