Scaffolds For Bone Tissue Engineering Research Articles

Cell Instructive Behavior of Composite Scaffolds in a Co-Culture of Human Mesenchymal Stem Cells and Peripheral Blood Mononuclear Cells

The in vitro evaluation of 3D scaffolds for bone tissue engineering in mono-cultures is a common practice; however, it does not represent the native complex nature of bone tissue. Co-cultures of osteoblasts and osteoclasts, without the addition of stimulating agents for monitoring cellular cross-talk, remains a challenge. In this study, a growth factor-free co-culture of human bone marrow-derived mesenchymal stem cells (hBM-MSCs) and human peripheral blood mononuclear cells (hPBMCs) has been established and used for the evaluation of 3D-printed scaffolds for bone tissue engineering. The scaffolds were produced from PLLA/PCL/PHBV polymeric blends, with two composite materials produced through the addition of 2.5% w/v nanohydroxyapatite (nHA) or strontium-substituted nanohydroxyapatite (Sr-nHA). Cell morphology data showed that hPBMCs remained undifferentiated in co-culture, while no obvious differences were observed in the mono- and co-cultures of hBM-MSCs. A significantly increased alkaline phosphatase (ALP) activity and osteogenic gene expression was observed in co-culture on Sr-nHA-containing scaffolds. Tartrate-resistant acid phosphatase (TRAP) activity and osteoclastogenic gene expression displayed significantly suppressed levels in co-culture on Sr-nHA-containing scaffolds. Interestingly, mono-cultures of hPBMCs on Sr-nHA-containing scaffolds indicated a delay in osteoclasts formation, as evidenced from TRAP activity and gene expression, demonstrating that strontium acts as an osteoclastogenesis inhibitor. This co-culture study presents an effective 3D model to evaluate the regenerative capacity of scaffolds for bone tissue engineering, thus minimizing time-consuming and costly in vivo experiments.

Biodegradable electrospun poly(L-lactide-co-ε-caprolactone)/polyethylene glycol/bioactive glass composite scaffold for bone tissue engineering.

The field of tissue engineering has witnessed significant advancements in recent years, driven by the pursuit of innovative solutions to address the challenges of bone regeneration. In this study, we developed an electrospun composite scaffold for bone tissue engineering. The composite scaffold is made of a blend of poly(L-lactide-co-ε-caprolactone) (PLCL) and polyethylene glycol (PEG), with the incorporation of calcined and lyophilized silicate-chlorinated bioactive glass (BG) particles. Our investigation involved a comprehensive characterization of the scaffold's physical, chemical, and mechanical properties, alongside an evaluation of its biological efficacy employing alveolar bone-derived mesenchymal stem cells. The incorporation of PEG and BG resulted in elevated swelling ratios, consequently enhancing hydrophilicity. Thermal gravimetric analysis confirmed the efficient incorporation of BG, with the scaffolds demonstrating thermal stability up to 250°C. Mechanical testing revealed enhanced tensile strength and Young's modulus in the presence of BG; however, the elongation at break decreased. Cell viability assays demonstrated improved cytocompatibility, especially in the PLCL/PEG+BG group. Alizarin red staining indicated enhanced osteoinductive potential, and fluorescence analysis confirmed increased cell adhesion in the PLCL/PEG+BG group. Our findings suggest that the PLCL/PEG/BG composite scaffold holds promise as an advanced biomaterial for bone tissue engineering.

Design and characterization of 3D printed pore gradient hydrogel scaffold for bone tissue engineering

Macroporous hydrogel scaffolds are widely used in tissue engineering to promote cell growth and proliferation. Aiming to enhance cell seeding efficiency and facilitate the osteodifferentiation of mesenchymal stem cells, this study demonstrates the fabrication of pore gradient biodegradable hydrogel scaffolds inspired by natural bone structure for bone tissue engineering applications. The scaffolds were fabricated via extrusion-based 3D printing, using sequential deposition of three customized Gelatin/Oxidized Alginate - based inks with subsequent cryogenic crosslinking for permanent structure fixation. The resulting constructs were characterized and featured a continuous gradient morphology with pore sizes ranging from 10 to 300 μm. The gradient scaffolds exhibited improved mechanical stability, with a compression resistance of 149 kPa, as opposed to the non-gradient scaffold's 116 kPa at 70 % strain, and a sustained degradation rate with only a 10 % loss of its initial weight within three weeks. Gradient scaffolds demonstrated a doubling of cell seeding efficiency to 47 % with dense and homogeneously distributed cellular layers, as evidenced by confocal and electron microscopy. Furthermore, the gradient scaffolds demonstrated superior osteodifferentiation, with significantly higher ALP and DMP1 production and enhanced extracellular matrix mineralization compared to gradientless macroporous scaffolds. This study provides insights into the design of macroporous scaffolds and emphasizes the advantages of pore gradient over homogeneous gradientless morphologies.

4D-printed dual-responsive bioscaffolds for treating critical-sized irregular bone defects

Currently, treating irregular bone defects with a critical size is still challenging as material implantation in the complex defects with irregular shapes, effective osteogenesis and sufficient vascularization cannot be easily achieved simultaneously via a simple strategy. Herein, a dual-responsive bone tissue engineering scaffold is developed using a 4D printing strategy by intergrating a single type of multifunctional magnetic nanoparticles, Fe3O4@SiO2, with printing inks made of bioceramics and biopolymers. Minimally invasive implantation, fluent navigation of scaffolds as well as the precise boundary matching between scaffolds and the irregular defects are achieved through near-infrared (NIR) irradiation-based temperature responsive shape recovery and static magnetic field (SMF) stimulation. Moreover, improved bone regeneration in critical-sized bone defects is successfully achieved through the activation of PI3K/AKT pathway which significantly promotes osteogenic differentiation and vascularization. Besides, NIR-based photothermal stimulation upregulates the expression of heat shock protein (HSP90) and further promotes the osteogenesis and vascularization. The in vivo study also confirms that our scaffold can precisely fit the bone defect, and induce satisfactory osteogenesis and angiogenesis. This work provides a facile strategy to simultaneously-realize easy scaffold implantation in irregular bone defects and improves osteogenesis and angiogenesis by integrating a single type of multifunctional nanoparticles with scaffold matrices.

Nanocomposite Methacrylated Silk Fibroin-Based Scaffolds for Bone Tissue Engineering.

The treatment of bone defects is a clinical challenge. Bone tissue engineering is gaining interest as an alternative to current treatments, with the development of 3D porous structures (scaffolds) helpful in promoting bone regeneration by ensuring temporary functional support. In this work, methacrylated silk fibroin (SilMA) sponges were investigated as scaffolds for bone tissue engineering by exploiting the combination of physical (induced by NaCl salt during particulate leaching) and chemical crosslinking (induced by UV-light exposure) techniques. A biomimetic approach was adopted to better simulate the extracellular matrix of the bone by introducing either natural (mussel shell-derived) or synthetic-origin hydroxyapatite nanoparticles into the SilMA sponges. The obtained materials were characterized in terms of pore size, water absorption capability and mechanical properties to understand both the effect of the inclusion of the two different types of nanoparticles and the effect of the photocrosslinking. Moreover, the SilMA sponges were tested for their bioactivity and suitability for bone tissue engineering purposes by using osteosarcoma cells, studying their metabolism by an AlamarBlue assay and their morphology by scanning electron microscopy. Results indicate that photocrosslinking helps in obtaining more regular structures with bimodal pore size distributions and in enhancing the stability of the constructs in water. Moreover, the addition of naturally derived hydroxyapatite was observed to be more effective at activating osteosarcoma cell metabolism than synthetic hydroxyapatite, showing a statistically significant difference in the AlamarBlue measurement on day 7 after seeding. The methacrylated silk fibroin/hydroxyapatite nanocomposite sponges developed in this work were found to be promising tools for targeting bone regeneration with a sustainable approach.

Harnessing potential of avian eggshell membrane derived collagen hydrolysate for bone tissue regeneration.

Natural bone grafts are the highly preferred materials for restoring the lost bone, while being constrained of donor availability and risk of disease transmission. As a result, tissue engineering is emerging as an efficacious and competitive technique for bone repair. Bone tissue engineering (TE) scaffolds to support bone regeneration and devoid of aforesaid limitations are being vastly explored and among these the avian eggshell membrane has drawn attention for TE owing to its low immunogenicity, similarity with the extracellular matrix, and easy availability. In this study, the development of bone ingrowth support system from avian eggshell membrane derived collagen hydrolysates (Col-h) is reported. The hydrolysate, cross-linked with glutaraldehyde, was developed into hydrogels with poly-(vinyl alcohol) (PVA) by freeze-thawing and further characterized with ATR-FTIR, XRD, FESEM. The biodegradability, swelling, mechanical, anti-microbial, and biocompatibility evaluation were performed further for the suitability in bone regeneration. The presence of amide I, amide III, and -OH functional groups at 1639cm- 1,1264cm- 1, and 3308cm- 1 respectively and broad peak between 16°-21° (2θ) in XRD data reinstated the composition and form. The maximum ratio of Col-h/PVA that produced well defined hydrogels was 50:50. Though all the hydrogel matrices alluded towards their competitive attributes and applicability towards restorative bone repair, the hydrogel with 40:60 ratios showed better mechanical strength and cell proliferation than its counterparts. The prominent E. coli growth inhibition by the hydrogel matrices was also observed, along with excellent biocompatibility with MG-63 osteoblasts. The findings indicate strongly the promising application of avian eggshell-derived Col-h in supporting bone regeneration.

Biomimetic design and fabrication of thermally induced radial gradient shape memory scaffolds using fused deposition modeling (FDM) for bone tissue engineering

Bone defects pose a significant challenge, often exceeding natural healing capabilities. This study explores the potential of thermally induced radial gradient shape memory (RGSM) scaffolds for minimally invasive bone repair. Inspired by the natural porosity gradient of bone, these scaffolds feature a high-porosity inner zone that mimics cancellous bone and a low-porosity outer zone that resembles cortical bone. When the relationship between porosity and key properties was investigated, it was found that lower-porosity RGSM scaffolds exhibited higher compressive strength but experienced higher residual strain and lower shape recovery ratio compared to their higher-porosity counterparts. Despite this trade-off, the gradient design successfully mimicked the natural bone structure, potentially enhancing osseointegration and bone regeneration. These results demonstrate the feasibility of RGSM scaffolds for bone tissue engineering. This holds promise for advancing minimally invasive surgical techniques and improving the treatment of bone defects.

An in vitro evaluation of the biological activity of biogenic eggshell-derived nanosized bioglass, poly (ε-caprolactone), and zein protein 3D composite scaffolds for bone tissue engineering

An in vitro evaluation of the biological activity of biogenic eggshell-derived nanosized bioglass, poly (ε-caprolactone), and zein protein 3D composite scaffolds for bone tissue engineering

Inhibiting the "isolated island" effect in simulated bone defect repair using a hollow structural scaffold design.

The treatment of bone tissue defects remains a complicated clinical challenge. Recently, the bone tissue engineering (BTE) technology has become an important therapeutic approach for bone defect repair. Researchers have improved the scaffolds, cells, and bioactive factors used in BTE through various existing bone repair material preparation strategies. However, due to insufficient vascularization, inadequate degradation, and fibrous wrapping, most BTE scaffolds impede new bone ingrowth and the reconstruction of grid-like connections in the middle and late stages of bone repair. These non-degradable scaffolds become isolated and disordered like independent "isolated islands", which leads to the failure of osteogenesis. Consequently, we hypothesized that the "island effect" prevents successful bone repair. Accordingly, we proposed a new concept of scaffold modification-osteogenesis requires a bone temporary shelter (also referred to as the empty shell osteogenesis concept). Based on this concept, we consider that designing hollow structural scaffolds is the key to mitigating the "isolated island" effect and enabling optimal bone regeneration and reconstruction.

Potential Application of Polysaccharide-based Aerogel Scaffolds for Bone Tissue Engineering

Potential Application of Polysaccharide-based Aerogel Scaffolds for Bone Tissue Engineering

Design of Biomimetic Porous Scaffolds for Bone Tissue Engineering

Design of Biomimetic Porous Scaffolds for Bone Tissue Engineering

Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D‐printed polycaprolactone scaffolds for future bone graft transplantation

AbstractBone graft transplantation is a risky procedure mainly due to postoperative complications. Tissue engineering is an alternative to regenerating bone tissue by seeding mesenchymal stem cells into 3D scaffolds by osteoinductive signaling. Poly(ε‐caprolactone) (PCL) is one of the most used biopolymers for fabricating scaffolds for bone tissue engineering. PCL is enriched with hydroxyapatite (HA) to promote the production of the bone‐mineralized matrix. Moreover, the application of pulsed electromagnetic fields (PEMFs) on scaffolds loaded with HA can significantly benefit collagen and HA networks favoring the interaction between organic and mineral phases of bones. In this context, we investigated, for the first time, the effect exerted by a PEMF exposure on the osteogenic differentiation of human adipose stem cells (hASCs) seeded onto 3D printed PCL‐HA scaffolds and cultured in growth and osteogenic medium (OM). After 21 days of culture, the results showed excellent colonization of scaffolds and the deposition of extracellular matrix (ECM) secreted by hASCs. Immunofluorescence staining confirmed the deposition of collagen type I and osteopontin both on scaffolds. Gene expression analysis indicated that both HA crystal and PEMF treatment were able to trigger osteogenic differentiation, as documented by the increase of osteogenic markers. These results suggest that HA, osteogenic factors, and PEMFs converge on the same signaling pathways as there are no additive effects and no change in protein synthesis between scaffolds with HA or treated with PEMFs for cells cultured in OM. The proposed study lays the foundations for exploring new approaches in bone graft transplantation.

Gelatin- zirconium based metal-organic framework (MOF 801) nanocomposite scaffold for bone tissue engineering

Tissue engineering applications in bone defect treatment have shown promising outcomes over the past decade. In this context, taking advantage of bioactive scaffolds mimicking the intrinsic composition of bone has resulted in remarkable effects on bone regeneration. In this study, Zirconium-based metal-organic framework, known as MOF 801, was synthesized and incorporated into the gelatin matrix as an osteoconductive agent to fabricate a nanocomposite bone scaffold by freeze-drying method. Physical and chemical characteristics of MOF 801 and nanocomposite scaffolds were analyzed using FE-SEM, EDS, XRD, ICP and FTIR. Besides, the biological activity of the prepared scaffolds was evaluated by MTT, alizarin red staining, crystal violet staining, and ALP assays. Inclusion of MOF 801 NPs into the scaffolds resulted in enhancement of their compressive strength up to 15 ± 0.05 MPa. The nanocomposite samples containing MOF 801 NPs also exhibited favorable bioactive feature that was confirmed by their apatite-forming ability on their surfaces upon immersion in SBF solution. The Zr ion and fumarate release studies illustrated sustained release profiles from the gelatin matrix, leading to both antioxidant and anti-inflammatory properties. MTT assay results affirmed biocompatibility of scaffolds containing up to 5 % w/w MOF 801, besides the crystal violet assay exhibited proper cell confluency and adhesion. Eventually, Alizarin red and ALP activity assays revealed that an increment of MOF 801 could induce calcium mineralization and Alkaline Phosphatase enzyme production in MG-63 cells confirming the potential of prepared scaffolds for related bone tissue engineering applications.

3D printed Nanohydroxyapatite/Polyamide 66 scaffolds with balanced mechanical property and osteogenic ability for bone repair

The biomaterial requirements for bone tissue repair are extremely strict. It not only requires the biomaterial to have good biocompatibility and biological activity, but also requires sufficient mechanical strength. Polyamide 66 (PA66) and nano-hydroxyapatite (n-HA) have been widely investigated in bone tissue engineering scaffold, however, its composites require further research. In this study, the 3D printing technology was utilized to fabricate personalized n-HA/PA66 bone tissue scaffold. The mechanical properties of n-HA/PA66 composite can be adjusted by configuring different raw material components and applying different porosity. It was found that 50 % porosity n-HA/PA66 composite scaffold showed a uniform porous structure and a compressive strength of 33.9 MPa. The composite scaffold also exhibited excellent biological properties while improving mechanical properties, in vitro cell tests indicated that the 3D printed n-HA/PA66 composite scaffold promoted differentiation of bone marrow mesenchymal stem cells (BMSCs) into osteoblasts. In in vivo animal model proved that the scaffold promoted endogenous bone regeneration in rabbit patellar bone defects, with newly formed bone volume of 20.9 % after two months of implantation. This research proposed a 3D printed polyamide/nano-hydroxyapatite composite with balanced mechanical property and osteogenic ability for customized bone tissue repair, and it has promising application prospects.

3D cotton-type anisotropic biomimetic scaffold with low fiber motion electrospun via a sharply inclined array collector for induced osteogenesis

Electrospinning is an effective method to fabricate fibrous scaffolds that mimic the ECM of bone tissue on a nano- to macro-scale. However, a limitation of electrospun fibrous scaffolds for bone tissue engineering is the structure formed by densely compacted fibers, which significantly impedes cell infiltration and tissue ingrowth. To address this problem, several researchers have developed numerous techniques for fabricating 3D fibrous scaffolds with customized topography and pore size. Despite the success in developing various 3D electrospun scaffolds based on fiber repulsion, the lack of contact points between fibers in those scaffolds has been shown to hinder cell attachment, migration, proliferation, and differentiation due to excessive movement of the fibers. In this article, we introduce a Dianthus caryophyllus-inspired scaffold fabricated using SIAC-PE, a modified collector under specific viscosity conditions of PCL/LA solution. The developed scaffold mimicking the structural similarities of the nature-inspired design presented enhanced cell proliferation, infiltration, and increased expression of bone-related factors by reducing fiber movements, presenting high space interconnection, high porosity, and controlled fiber topography.

Structure and function of engineered stromal cell-derived factor-1α.

To design biologically active, collagen-based scaffolds for bone tissue engineering, we have synthesized chimeric proteins consisting of stromal cell-derived factor-1α (SDF) and the von Willebrand factor A3 collagen-binding domain (CBD). The chimeric proteins were used to evaluate the effect of domain linkage and its order on the structure and function of the SDF and CBD. The structure of the chimeric proteins was analyzed by circular dichroism spectroscopy, while functional analysis was performed by a cell migration assay for the SDF domain and a collagen-binding assay for the CBD domain. Furthermore, computational structural prediction was conducted for the chimeric proteins to examine the consistency with the results of structural and functional analyses. Our structural and functional analyses as well as structural prediction revealed that linking two domains can affect their functions. However, their order had minor effects on the three-dimensional structure of CBD and SDF in the chimeric proteins.

Polyhydroxybutyrate-based osteoinductive mineralized electrospun structures that mimic components and tissue interfaces of the osteon for bone tissue engineering.

Scaffolds for bone tissue engineering should enable regeneration of bone tissues with its native hierarchically organized ECM and multiple tissue interfaces. To achieve this, inspired by the structure and properties of bone osteon, we fabricated polyhydroxybutyrate-based mineralized electrospun fibrous scaffolds. After studying multiple polyhydroxybutyrate (PHB)-based fibers, we chose 7%PHB/1%Gelatin fibers (PG) to fabricate mineralized fibers that mimic mineralized collagen fibers in bone. The mineralized PG (mPG) surface had a rough, hydrophilic layer of low crystalline calcium phosphate which was biocompatible to BMSCs, induced their proliferation and was osteoinductive. Subsequently, by modulating the electrospinning process, we fabricated mPG-based novel higher order fibrous scaffolds that mimic the macroscale geometries of osteons of bone ECM. Inspired by the aligned collagen fibers in bone lamellae, we fabricated mPG scaffolds with aligned fibers that could direct anisotropic elongation of mBMSCs. Further, we fabricated electrospun mPG-based osteoinductive tubular constructs which can mimic cylindrical bone components like osteons or lamellae or be used as long bone analogues based on their dimensions. Finally, to regenerate tissue interfaces in bone, we introduced a novel bi-layered scaffold-based approach. An electrospun bi-layered tubular construct that had PG in the outer layer and 7%PHB/0.5%Polypyrrole fibers (PPy) in the inner layer was fabricated. The bi-layered tubular construct underwent preferential surface mineralization only on its outer layer. This outer mineralized layer supported osteogenesis while the inner PPy layer could support neural cell growth. Thus, the bi-layered tubular construct may be used to regenerate haversian canal in the osteons which hosts nerve fibers. Overall, the study introduced novel techniques to fabricate biomimetic structures that can regenerate components of bone osteon and its multiple tissue interfaces. The study lays foundation for the fabrication of a modular scaffold that can regenerate bone with its hierarchical structure and complex tissue interfaces.

Properties of Carbonated Hydroxyapatite-Based Scaffold from Oyster Shells Composited with Honeycomb and Polyethylene Oxide for Bone Tissue Engineering Applications

Scaffold Carbonated Hydroxyapatite/Honeycomb/Polyethylene Oxide (CHA/HCB/PEO) has been obtained by freeze-drying. The bioceramic CHA used in this study was synthesized from oyster shells using precipitation. HCB and PEO were added as reinforcement materials that affect the crystallographic properties of the scaffold. This study aimed to determine the characteristics of the scaffolds for bone tissue engineering. CHA and scaffolds were characterized using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffractometer (XRD), and Scanning Electron Microscopy (SEM). FTIR spectra and XRD graphs confirmed that the CHA produced was B-type. FTIR spectra of the scaffold showed the presence of HCB and PEO in the scaffold, which means they were homogeneously bound in the scaffold solution. XRD test results show that scaffolds' crystallinity and crystallite size tends to decrease compared to CHA. This was good because they could make cells easier to proliferate. A small-scale pore structure (micropore) was also formed in the scaffold. The porosity and pore size of the scaffold were affected by the concentration of CHA. The presence of the micropores can increase the permeability of the scaffold and facilitate cell migration. Thus, the composition of CHA/HCB/PEO scaffolds can be a good candidate material in bone tissue engineering.

Investigating the Role of Amino Acids in Short Peptides for Hydroxyapatite Binding and Osteogenic Differentiation of Mesenchymal Stem Cells to Aid Bone Regeneration.

Bone defects show a slow rate of osteoconduction and imperfect reconstruction, and the current treatment strategies to treat bone defects suffer from limitations like immunogenicity, lack of cell adhesion, and the absence of osteogenic activity. In this context, bioactive supramolecular peptides and peptide gels offer unique opportunities to develop biomaterials that can play a dominant role in the biomineralization of bone tissues and promote bone formation. In this article, we have demonstrated the potential of six tetrapeptides for specific binding to hydroxyapatite (HAp), a major inorganic component of the bone, and their effect on the growth and osteogenic differentiation of mesenchymal stem cells (MSCs). We adopted a simplistic approach of rationally designing amphiphilic peptides by incorporating amino acids, Ser, pSer, Pro, Hyp, Asp, and Glu, which are present in either collagenous or noncollagenous proteins and render properties like antioxidant, calcification, and mineralization. A total of six tetrapeptides, Trp-Trp-His-Ser (WWHS), Trp-Trp-His-pSer (WWHJ), Trp-Trp-His-Pro (WWHP), Trp-Trp-His-Hyp (WWHO), Trp-Trp-His-Asp (WWHD), and Trp-Trp-His-Glu (WWHE), were synthesized. Four peptides were found to self-assemble into nanofibrillar gels resembling the extracellular matrix (ECM), and the remaining two peptides (WWHJ, WWHP) self-assembled into nanorods. The peptides showed excellent cell adhesion, encapsulation, proliferation, and migration and induced the differentiation of mesenchymal stem cells (MSCs), as evident from the enhanced mineralization, resulting from the upregulation of osteogenic markers, RUNX 2, COL I, OPN, and OCN, alkaline phosphatase (ALP) production, and calcium deposition. The peptides also induced the downregulation of inflammatory markers, TNF-α and iNOS, and the upregulation of the anti-inflammatory marker, IL-10, resulting in M2 macrophage polarization. RANKL and TRAP genes were downregulated in a coculture system of MC3T3-E1 and RAW 264.7 cells, implying that peptides promote osteogenesis and inhibit osteoclastogenesis. The peptide-based biomaterials developed in this work can enhance bone regeneration capacity and show strong potential as scaffolds for bone tissue engineering.

Effects of MgO nanoparticle addition on the mechanical properties, degradation properties, antibacterial properties and in vitro and in vivo biological properties of 3D-printed Zn scaffolds

Bone tissue engineering is the main method for repairing large segment bone defects. In this study, a layer of bioactive MgO nanoparticles was wrapped on the surface of spherical Zn powders, which allowed the MgO nanoparticles to be incorporated into 3D-printed Zn matrix and improved the biodegradation and biocompatibility of the Zn matrix. The results showed that porous pure Zn scaffolds and Zn/MgO scaffolds with skeletal-gyroid (G) model structure were successfully prepared by selective laser melting (SLM). The average porosity of two porous scaffolds was 59.3 and 60.0%, respectively. The pores were uniformly distributed with an average pore size of 558.6–569.3 μm. MgO nanoparticles regulated the corrosion rate of scaffolds, resulting in a more uniform corrosion degradation behavior of the Zn/MgO scaffolds in simulated body fluid solution. The degradation ratio of Zn/MgO composite scaffolds in vivo was increased compared to pure Zn scaffolds, reaching 15.6% at 12 weeks. The yield strength (10.8 ± 2.4 MPa) of the Zn/MgO composite scaffold was comparable to that of cancellous bone, and the antimicrobial rate were higher than 99%. The Zn/MgO composite scaffolds could better guide bone tissue regeneration in rat cranial bone repair experiments (completely filling the scaffolds at 12 weeks). Therefore, porous Zn/MgO scaffolds with G-model structure prepared with SLM are a promising biodegradable bone tissue engineering scaffold.