Scaffold-based Bone Tissue Engineering Research Articles

The symbiotic effect of osteoinductive extracellular vesicles and mineralized microenvironment on osteogenesis.

The increasing prevalence of bone-related diseases has raised concern about the need for an osteoinductive and mechanically stronger scaffold-based bone tissue engineering (BTE) alternative. A mineralized microenvironment, similar to the native bone microenvironment, is required in the scaffold to recruit and differentiate local mesenchymal stem cells at the bone defect site. Further, extracellular vesicles (EVs), pre-osteoblasts' secretome, contain osteoinductive cargo and have recently been exploited in bone regeneration. This work developed a cell-free and mechanically strong interpenetrating network-based scaffold for BTE by combining the action of osteoinductive EVs with a mineralized microenvironment. The MC3T3 (a pre-osteoblast cell line) is used as a source of EVs and as the target population. The optimal concentration of MC3T3-EVs was first determined to induce osteogenesis in target cells. The osteoinductive potential of the scaffold was estimated in vitro by osteogenesis-related markers like the alkaline phosphatase (ALP) enzyme and calcium content. The MC3T3-EVs cargo was also studied for osteoinductive signals such as ALP, calcium, and mRNA. The findings of this work indicated that MC3T3-EVs at a 90 μg/mL dose had significantly higher ALP activity than 0 μg/mL (1.47-fold), 10 μg/mL (1.41-fold), and 30 μg/mL (1.39-fold) EV-concentration on day 14. Further combination of the optimum dose of EVs with a mineralized microenvironment significantly enhanced ALP activity (1.5-fold) and mineralization (3.36-fold) as compared to the control group on day 7. EV cargo analysis revealed the presence of calcium, the ALP enzyme, and the mRNAs necessary for osteogenesis and angiogenesis. ALP activity was significantly boosted in the EV-containing target cells as early as day 1, and mineralization began on day 7 because MC3T3-EVs carry ALP enzymes and calcium as cargo. When osteoinductive EVs were combined with an osteoconductive mineralized microenvironment, osteogenesis was significantly enhanced in target cells at early time points. The interaction between osteoinductive EVs and the mineralized milieu facilitates the process of osteogenesis in the target cells and suggests a potential cell-free strategy for in vivo bone repair.

Kaempferol-loaded bioactive glass-based scaffold for bone tissue engineering: in vitro and in vivo evaluation

Due to the increasing prevalence of bone disorders among people especially in average age, the future of treatments for osseous abnormalities has been illuminated by scaffold-based bone tissue engineering. In this study, in vitro and in vivo properties of 58S bioactive glass-based scaffolds for bone tissue engineering (bare (B.SC), Zein-coated (C.SC), and Zein-coated containing Kaempferol (KC.SC)) were evaluated. This is a follow-up study on our previously published paper, where we synthesized 58S bioactive glass-based scaffolds coated with Kaempferol-loaded Zein biopolymer, and characterized from mostly engineering points of view to find the optimum composition. For this aim, in vitro assessments were done to evaluate the osteogenic capacity and biological features of the scaffolds. In the in vivo section, all types of scaffolds with/without bone marrow-derived stem cells (BMSC) were implanted into rat calvaria bone defects, and potential of bone healing was assessed using imaging, staining, and histomorphometric analyses. It was shown that, Zein-coating covered surface cracks leading to better mechanical properties without negative effect on bioactivity and cell attachment. Also, BMSC differentiation proved that the presence of Kaempferol caused higher calcium deposition, increased alkaline phosphatase activity, bone-specific gene upregulation in vitro. Further, in vivo study confirmed positive effect of BMSC-loaded KC.SC on significant new bone formation resulting in complete bone regeneration. Combining physical properties of coated scaffolds with the osteogenic effect of Kaempferol and BMSCs could represent a new strategy for bone regeneration and provide a more effective approach to repairing critical-sized bone defects.

Clinical translation of a patient-specific scaffold-guided bone regeneration concept in four cases with large long bone defects.

BackgroundBone defects after trauma, infection, or tumour resection present a challenge for patients and clinicians. To date, autologous bone graft (ABG) is the gold standard for bone regeneration. To address the limitations of ABG such as limited harvest volume as well as overly fast remodelling and resorption, a new treatment strategy of scaffold-guided bone regeneration (SGBR) was developed. In a well-characterized sheep model of large to extra-large tibial segmental defects, three-dimensional (3D) printed composite scaffolds have shown clinically relevant biocompatibility and osteoconductive capacity in SGBR strategies. Here, we report four challenging clinical cases with large complex posttraumatic long bone defects using patient-specific SGBR as a successful treatment.MethodsAfter giving informed consent computed tomography (CT) images were used to design patient-specific biodegradable medical-grade polycaprolactone-tricalcium phosphate (mPCL-TCP, 80:20 ​wt%) scaffolds. The CT scans were segmented using Materialise Mimics to produce a defect model and the scaffold parts were designed with Autodesk Meshmixer. Scaffold prototypes were 3D-printed to validate robust clinical handling and bone defect fit. The final scaffold design was additively manufactured under Food and Drug Administration (FDA) guidelines for patient-specific and custom-made implants by Osteopore International Pte Ltd.ResultsFour patients (age: 23–42 years) with posttraumatic lower extremity large long bone defects (case 1: 4 ​cm distal femur, case 2: 10 ​cm tibia shaft, case 3: complex malunion femur, case 4: irregularly shaped defect distal tibia) are presented. After giving informed consent, the patients were treated surgically by implanting a custom-made mPCL-TCP scaffold loaded with ABG (case 2: additional application of recombinant human bone morphogenetic protein-2) harvested with the Reamer-Irrigator-Aspirator system (RIA, Synthes®). In all cases, the scaffolds matched the actual anatomical defect well and no perioperative adverse events were observed. Cases 1, 3 and 4 showed evidence of bony ingrowth into the large honeycomb pores (pores >2 ​mm) and fully interconnected scaffold architecture with indicative osseous bridges at the bony ends on the last radiographic follow-up (8–9 months after implantation). Comprehensive bone regeneration and full weight bearing were achieved in case 2 ​at follow-up 23 months after implantation.ConclusionThis study shows the bench to bedside translation of guided bone regeneration principles into scaffold-based bone tissue engineering. The scaffold design in SGBR should have a tissue-specific morphological signature which stimulates and directs the stages from the initial host response towards the full regeneration. Thereby, the scaffolds provide a physical niche with morphology and biomaterial properties that allow cell migration, proliferation, and formation of vascularized tissue in the first one to two months, followed by functional bone formation and the capacity for physiological bone remodelling. Great design flexibility of composite scaffolds to support the one to three-year bone regeneration was observed in four patients with complex long bone defects.The translational potential of this articleThis study reports on the clinical efficacy of SGBR in the treatment of long bone defects. Moreover, it presents a comprehensive narrative of the rationale of this technology, highlighting its potential for bone regeneration treatment regimens in patients with any type of large and complex osseous defects.

MiRNA-Nanofiber, the Next Generation of Bioactive Scaffolds for Bone Regeneration: A Review.

Scaffold-based bone tissue engineering has been introduced as an alternative treatment option for bone grafting due to limitations in the allograft. Not only physical conditions but also biological conditions such as gene expression significantly impact bone regeneration. Scaffolds in composition with bioactive molecules such as miRNA mimics provide a platform to enhance migration, proliferation, and differentiation of osteoprogenitor cells for bone regeneration. Among scaffolds, fibrous structures showed significant advantages in promoting osteogenic differentiation and bone regeneration via delivering bioactive molecules over the past decade. Here, we reviewed the bone and bone fracture healing considerations for the impact of miRNAs on bone regeneration. We also examined the methods used to improve miRNA mimics uptake by cells, the fabrication of fibrous scaffolds, and the effective delivery of miRNA mimics using fibrous scaffold and their processes for bone development. Finally, we offer our view on the principal challenges of miRNA mimics delivery by nanofibers for bone tissue engineering.

3D Printing of Tricalcium Phosphate/Poly Lactic-co-glycolic Acid Scaffolds Loaded with Carfilzomib for Treating Critical-sized Rabbit Radial Bone Defects.

The rapid development of scaffold-based bone tissue engineering strongly relies on the fabrication of advanced scaffolds and the use of newly discovered functional drugs. As the creation of new drugs and their clinical approval often cost a long time and billions of U.S. dollars, producing scaffolds loaded with repositioned conventional drugs whose biosafety has been verified clinically to treat critical-sized bone defect has gained increasing attention. Carfilzomib (CFZ), an approved clinical proteasome inhibitor with a much fewer side effects, is used to replace bortezomib to treat multiple myeloma. It is also reported that CFZ could enhance the activity of alkaline phosphatase and increase the expression of osteogenic transcription factors. With the above consideration, in this study, a porous CFZ/β-tricalcium phosphate/poly lactic-co-glycolic acid scaffold (designated as “cytidine triphosphate [CTP]”) was produced through cryogenic three-dimensional (3D) printing. The hierarchically porous CTP scaffolds were mechanically similar to human cancellous bone and can provide a sustained CFZ release. The implantation of CTP scaffolds into critical-sized rabbit radius bone defects improved the growth of new blood vessels and significantly promoted new bone formation. To the best of our knowledge, this is the first work that shows that CFZ-loaded scaffolds could treat nonunion of bone defect by promoting osteogenesis and angiogenesis while inhibiting osteoclastogenesis, through the activation of the Wnt/β-catenin signaling. Our results suggest that the loading of repositioned drugs with effective osteogenesis capability in advanced bone tissue engineering scaffold is a promising way to treat critical-sized defects of a long bone.

A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds

Scaffold-based bone tissue engineering has been extensively developed as a potential means to treatment of large bone defects. To enhance the biomechanical performance of porous tissue scaffolds, computational design techniques have gained growing popularity attributable to their compelling efficiency and strong predictive features compared with time-consuming trial-and-error experiments. Nevertheless, the mechanical stimulus necessary for bone regeneration, which characterizes dynamic nature due to continuous variation in the bone-scaffold construct system as a result of bone-ingrowth and scaffold biodegradation, is often neglected. Thus, this study proposes a time-dependent mechanobiology-based topology optimization framework for design of tissue scaffolds, thereby developing an ongoing favorable microenvironment and ensuring a long-term outcome for bone regeneration. For the first time, a level-set based topology optimization algorithm and a time-dependent shape derivative are developed to optimize the scaffold architecture. In this study, a large bone defect in a simulated 2D femur model and a partial defect in a 3D femur model are considered to demonstrate the effectiveness of the proposed design method. The results are compared with those obtained from stiffness-based topology optimization, time-independent design and typical scaffold constructs, showing significant advantages in continuing bone ingrowth outcomes.

Non-invasive in situ monitoring of bone scaffold activity by speckle pattern analysis.

Scaffold-based bone tissue engineering aims to develop 3D scaffolds that mimic the extracellular matrix to regenerate bone defects and damages. In this paper, we provide a laser speckle analysis to characterize the highly porous scaffold. The experimental procedure includes in situ acquisition of speckle patterns of the bone scaffold at different times under preserved environmental conditions, and follow-up statistical post-processing toward examining its internal activity. The activity and overall viscoelastic properties of scaffolds are expressed via several statistical parameters, and the variations in the computed parameters are attributed to time-varying activity of the samples during their internal substructure migration.

A modular design strategy to integrate mechanotransduction concepts in scaffold-based bone tissue engineering

Repair or regeneration of load-bearing bones has long been an incentive for the tissue engineering community to develop a plethora of synthetic bone scaffolds. Despite the key role of physical forces and the mechanical environment in bone regeneration, the mechanotransduction concept has rarely been incorporated in structural design of bone tissue scaffolds, particularly those made of bioactive materials such as hydrogels and bioceramics. Herein, we introduce a modular design strategy to fabricate a load bearing device that can support a wide range of hydrogel- and ceramic-based scaffolds against complex in-vivo loading conditions to induce desirable mechanical strains for bone regeneration within the scaffolds. The device is comprised of a fenestrated polymeric shell and ceramic structural pillars arranged in a sophisticated configuration to provide ample internal space for the scaffold, also enabling it to purposely regulate the levels of strains and stresses within the scaffolds. Utilizing this top-down design approach, we demonstrate that the failure load of alginate hydrogels increases 3200-fold in compression, 300-fold in shear and 75-fold in impact, achieving the values that enable them to withstand physiological loads in weight-bearing sites, while allowing generation of osteoinductive strains (i.e., 0.2-0.4%) in the hydrogel. This modular design approach opens a broad range of opportunities to utilize various bioactive but mechanically weak scaffolds for the treatment of load-bearing defects and exploiting mechanobiology strategies to improve bone regeneration.

Novel Poly(ɛ-caprolactone)/Graphene Scaffolds for Bone Cancer Treatment and Bone Regeneration.

Scaffold-based bone tissue engineering is the most relevant approach for critical-sized bone defects. It is based on the use of three-dimensional substrates to provide the appropriate biomechanical environment for bone regeneration. Despite some successful results previously reported, scaffolds were never designed for disease treatment applications. This article proposes a novel dual-functional scaffold for cancer applications, comprising both treatment and regeneration functions. These functions are achieved by combining a biocompatible and biodegradable polymer and graphene. Results indicate that high concentrations of graphene enhance the mechanical properties of the scaffolds, also increasing the inhibition on cancer cell viability and proliferation.

The Application of microRNAs in Biomaterial Scaffold-Based Therapies for Bone Tissue Engineering.

In recent years, the application of microRNAs (miRNAs) or anti-microRNAs (anti-miRNAs) that can induce expression of the runt-related transcription factor 2 (RUNX2), a master regulator of osteogenesis, has been investigated as a promising alternative bone tissue engineering strategy. In this review, biomaterial scaffold-based applications that have been used to deliver cells expressing miRNAs or anti-miRNAs that induce expression of RUNX2 for bone tissue engineering are discussed. An overview of the components of the scaffold-based therapies including the miRNAs/anti-miRNAs, cell types, gene delivery vectors, and scaffolds that have been applied are provided. To date, there have been nine miRNAs/anti-miRNAs (i.e., miRNA-26a, anti-miRNA-31, anti-miRNA-34a, miRNA-135, anti-miRNA-138, anti-miRNA-146a, miRNA-148b, anti-miRNA-221, and anti-miRNA-335) that have been incorporated into scaffold-based bone tissue engineering applications and investigated in an in vivo bone critical-sized defect model. For all of the biomaterial scaffold-based miRNA therapies that have been developed thus far, cells that are transfected or transduced with the miRNA/anti-miRNA are loaded into the scaffolds and implanted at the site of interest instead of locally delivering the miRNA/anti-miRNAs directly from the scaffolds. Thus, future work may focus on developing biomaterial scaffolds to deliver miRNAs or anti-miRNAs into cells in vivo.

Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells.

Scaffold-based bone tissue engineering strategies fail to meet the clinical need to fabricate patient-specific and defect shape-specific, anatomically relevant load-bearing bone constructs. 3D bioprinting strategies are gaining major interest as a potential alternative, but design of a specific bioink is still a major challenge that can modulate key signaling pathways to induce osteogenic differentiation of progenitor cells, as well as offer appropriate microenvironment to augment mineralization. In the present study, we developed silk fibroin protein and gelatin-based conjugated bioink, which showed localized presence and sustained release of calcium. Presence of 2.6 mM Ca2+ ions within the bioink could further induce enhanced osteogenesis of Bone marrow derived progenitor cells (hMSCs) compared to the bioink without calcium, or same concentration of calcium added to the media, as evidenced by upregulated gene expression of osteogenic markers. This study generated unprecedented mechanistic insights on the role of fibroin-gelatin-CaCl2 bioink in modulating expression of several proteins which are known to play crucial role in bone regeneration as well as key signaling pathways such as β-catenin, BMP signaling pathway, Parathyroid hormone-dependent signaling pathway, Forkhead box O (FOXO) pathway, and Hippo pathways in hMSC-laden bioprinted constructs.

Harnessing an Inhibitory Role of miR-16 in Osteogenesis by Human Mesenchymal Stem Cells for Advanced Scaffold-Based Bone Tissue Engineering.

MicroRNA (miRNA) therapeutics is increasingly being developed to either target bone-related diseases such as osteoporosis and osteoarthritis or as the basis for novel bone tissue engineering strategies. A number of miRNAs have been reported as potential osteo-therapeutics but no consensus has yet been established on the optimal target. miR-16 has been studied extensively in nonosteogenic functions and used as functionality reporter target in the development of nonviral miRNA delivery platforms. This study hypothesized that miR-16 may also play an inhibitory role in osteogenesis due to its ability to directly target Smad5 and AcvR2a. This study thus aimed to assess the potential of miR-16 inhibition to increase osteogenesis in human mesenchymal stem cells (hMSCs) using a previously established miRNA delivery platform composed of nanohydroxyapatite (nHA) particles as nonviral vectors in combination with collagen-nHA scaffolds designed specifically for bone repair. Initial results showed that antagomiR-16 delivery efficiently increased the relative levels of both putative targets and Runx2, the key transcription factor for osteogenesis, while also increasing osteocalcin levels. Furthermore, significant increases in mineral calcium deposition by hMSCs were found in both monolayer and most importantly in scaffold-based osteodifferentiation studies, ultimately demonstrating that miR-16 inhibition further enhances the therapeutic potential of a scaffold with known potential for bone repair applications and thus holds significant therapeutic potential as a novel bone tissue engineering strategy. Furthermore, we suggest that harnessing the additional functions known to miR-16 by incorporating either its enhancers or inhibitors to tissue-specific tailored scaffolds provides exciting opportunities for a diverse range of therapeutic indications.

Current Concepts in Scaffolding for Bone Tissue Engineering.

Bone disorders are of significant worry due to their increased prevalence in the median age. Scaffold-based bone tissue engineering holds great promise for the future of osseous defects therapies. Porous composite materials and functional coatings for metallic implants have been introduced in next generation of orthopedic medicine for tissue engineering. While osteoconductive materials such as hydroxyapatite and tricalcium phosphate ceramics as well as some biodegradable polymers are suggested, much interest has recently focused on the use of osteoinductive materials like demineralized bone matrix or bone derivatives. However, physiochemical modifications in terms of porosity, mechanical strength, cell adhesion, biocompatibility, cell proliferation, mineralization and osteogenic differentiation are required. This paper reviews studies on bone tissue engineering from the biomaterial point of view in scaffolding. Level of evidence: I.

A novel method for developing three dimensional (3D) silk–PVA microenvironments for bone tissue engineering—an in vitro study

Three dimensional (3D) porous scaffold based bone tissue engineering can possibly serve as an alternative approach to repairing severe bone injuries. The present study was carried out to evaluate the impact of 3D porous silk fibroin (SF)–polyvinyl alcohol (PVA) based scaffolds on human osteoblast-like (MG63) cell attachment and proliferation in vitro. SF and PVA blended porous scaffolds (3:1 ratio) with tunable porosity and mechanical properties were prepared by a freeze drying method in a solvent-free system. Citric acid plays a dual role of cross-linking and a gas foaming reaction with sodium bicarbonate (NaHCO3). Porosity was induced by gas foaming using different weight fractions (0.5%, 1.0%, 1.5% and 2.0% w/v) of NaHCO3. The developed scaffolds were characterized for porosity, swelling ratio, compressive and biodegradation properties. The scaffolds were proved to be non-toxic to the osteoblast-like cells in MTT assay. The DNA content of the cells attached to the scaffolds was also estimated. The cell attachment and proliferation onto the scaffolds were studied using SEM. The study highlights the potential of such 3D scaffolds with controlled porosity as an effective biomaterial for bone regeneration.

Scaffold-based Bone Tissue Engineering

Tissue engineering provides the possibility of regenerating damaged or lost osseous structures without the need for permanent implants. Within this context, biodegradable and bioresorbable scaffolds can provide structural and biomechanical stability until the body's own tissue can take over their function. Additive biomanufacturing makes it possible to design the scaffold's architectural characteristics to specifically guide tissue formation and regeneration. Its nano-, micro-, and macro-architectural properties can be tailored to ensure vascularization, oxygenation, nutrient supply, waste exchange, and eventually ossification not only in its periphery but also in its center, which is not in direct contact with osteogenic elements of the surrounding healthy tissue. In this article we provide an overview about our conceptual design and process of the clinical translation of scaffold-based bone tissue engineering applications.

Insight into characteristic features of cartilage growth plate as a physiological template for bone formation.

Cartilage growth plate is a natural template from both a biochemical and structural point of view and allows osteoblasts migration, proliferation, differentiation, and ultimately, bone formation. It is evolutionary adjusted to support bone formation within strictly defined spatial framework serving as an interesting model for studying more mechanistically aspects which might be important for specific scaffold-based bone tissue engineering strategies. Surprisingly little is known about the geometric features of this physiological template. To this purpose we analyzed cartilage growth plate from rat, mouse, and human costochondral junction and tibia. High-resolution X-ray tomography showed that pore size in the zone of provisional calcification was within 20 to 30 µm range and in the metaphysis in 35 to 50 µm range. The thickness of calcified longitudinal septa in zone of provisional calcification was 3 to 5 µm and in metaphysis 7 to 12 µm. The porosity varied from 84 to 88%. We observed that numerical values characteristic for cartilage growth plate were not significantly influenced by the species of origin, by the type of bone, or by age. In addition, electron microscopy of calcified fragments of longitudinal septa showed that the calcium aggregates were globular, connected with each other, and formed a shell covering cartilage matrix located within longitudinal septa.

Scaffolds containing chitosan/carboxymethyl cellulose/mesoporous wollastonite for bone tissue engineering

Scaffold based bone tissue engineering utilizes a variety of biopolymers in different combinations aiming to deliver optimal properties required for bone regeneration. In the current study, we fabricated bio-composite scaffolds containing chitosan (CS), carboxymethylcellulose (CMC) with varied concentrations of mesoporous wollastonite (m-WS) particles by the freeze drying method. The CS/CMC/m-WS scaffolds were characterized by the SEM, EDS and FT-IR studies. Addition of m-WS particles had no effect on altering the porosity of the scaffolds. m-WS particles at 0.5% concentration in the CS/CMC scaffolds showed significant improvement in the bio-mineralization and protein adsorption properties. Addition of m-WS particles in the CS/CMC scaffolds significantly reduced their swelling and degradation properties. The CS/CMC/m-WS scaffolds also showed cyto-friendly nature to human osteoblastic cells. The osteogenic potential of CS/CMC/m-WS scaffolds was confirmed by calcium deposition and expression of an osteoblast specific microRNA, pre-mir-15b. Thus, the current investigations support the use of CS/CMC/m-WS scaffolds for bone tissue engineering applications.

Polycaprolactone scaffold and reduced rhBMP-7 dose for the regeneration of critical-sized defects in sheep tibiae

The transplantation of autologous bone graft as a treatment for large bone defects has the limitation of harvesting co-morbidity and limited availability. This drives the orthopaedic research community to develop bone graft substitutes. Routinely, supra-physiological doses of bone morphogenetic proteins (BMPs) are applied perpetuating concerns over undesired side effects and cost of BMPs. We therefore aimed to design a composite scaffold that allows maintenance of protein bioactivity and enhances growth factor retention at the implantation site. Critical-sized defects in sheep tibiae were treated with the autograft and with two dosages of rhBMP-7, 3.5 mg and 1.75 mg, embedded in a slowly degradable medical grade poly(ε-caprolactone) (PCL) scaffold with β-tricalcium phosphate microparticles (mPCL–TCP). Specimens were characterised by biomechanical testing, microcomputed tomography and histology. Bridging was observed within 3 months for the autograft and both rhBMP-7 treatments. No significant difference was observed between the low and high rhBMP-7 dosages or between any of the rhBMP-7 groups and autograft implantation. Scaffolds alone did not induce comparable levels of bone formation compared to the autograft and rhBMP-7 groups. In summary, the mPCL–TCP scaffold with the lower rhBMP-7 dose led to equivalent results to autograft transplantation or the high BMP dosage. Our data suggest a promising clinical future for BMP application in scaffold-based bone tissue engineering, lowering and optimising the amount of required BMP.

Autologous vs. allogenic mesenchymal progenitor cells for the reconstruction of critical sized segmental tibial bone defects in aged sheep

Mesenchymal progenitor cells (MPCs) represent an attractive cell population for bone tissue engineering. Their special immunological characteristics suggest that MPCs may be used in allogenic applications. The objective of this study was to compare the regenerative potential of autologous vs. allogenic MPCs in an ovine critical size segmental defect model. Ovine MPCs were isolated from bone marrow aspirates, expanded and cultured with osteogenic medium for 2weeks before implantation. Autologous and allogenic transplantation was performed using the cell-seeded scaffolds and unloaded scaffolds, while the application of autologous bone grafts served as a control group (n=6). Bone healing was assessed 12weeks after surgery by radiology, microcomputed tomography, biomechanical testing and histology. Radiology, biomechanical testing and histology revealed no significant differences in bone formation between the autologous and allogenic groups. Both cell groups showed more bone formation than the scaffold alone, whereas the biomechanical data showed no significant differences between the cell groups and the unloaded scaffolds. The results of the study suggest that scaffold-based bone tissue engineering using allogenic cells offers the potential for an off-the-shelf product. Thus the results of this study serve as an important baseline for translation of the assessed concepts into clinical applications.

Cellulose and Collagen Derived Micro-Nano Structured Scaffolds for Bone Tissue Engineering

Scaffold based bone tissue engineering (BTE) has made great progress in regenerating lost bone tissue. Materials of natural and synthetic origin have been used for scaffold fabrication. Scaffolds derived from natural polymers offer greater bioactivity and biocompatibility with mammalian tissues to favor tissue healing, due to their similarity to native extracellular matrix (ECM) components. Often it is a challenge to fabricate natural polymer based scaffolds for BTE applications without compromising their bioactivity, while maintaining adequate mechanical properties. In this work, we report the fabrication and characterization of cellulose and collagen based micro-nano structured scaffolds using human osteoblasts (HOB) for BTE applications. These porous micro-nano structured scaffolds (average pore diameter 190 +/- 10 microm) exhibited mechanical properties in the mid range of human trabecular bone (compressive modulus 266.75 +/- 33.22 MPa and strength 12.15 3 +/- 2.23 MPa). These scaffolds supported the greater adhesion and phenotype maintenance of cultured HOB as reflected by higher levels of osteogenic enzyme alkaline phosphatase and mineral deposition compared to control polyester micro-nano structured scaffolds of identical pore properties. These natural polymer based micro-nano structured scaffolds may serve as alternatives to polyester based scaffolds for BTE applications.