Saturated Adsorption Capacity Research Articles

Simultaneous super-stable mineralization of Pb2+, Cd2+ and Cu2+ using MIL-101(Fe)@MgFe-LDH

The Pb2+, Cd2+ and Cu2+ co-existing pollution in battery and smelting industries have posed a significant threat to ecosystem and human health. Herein, we reported the fabrication of MIL-101(Fe)@MgFe-LDH successfully using in-situ nucleation and transformation strategy. The MIL-101(Fe)@MgFe-LDH exhibited maximum saturated adsorption capacities of 1408.57, 568.18 and 366.30 mg g−1 towards Pb2+, Cd2+ and Cu2+ in aqueous solution, respectively, and the adsorption data for each of these heavy metals can be well-fitted with pseudo-second-order kinetic and Langmuir isotherm models. Moreover, when MIL-101(Fe)@MgFe-LDH was applied for 300 mg kg−1 of Pb2+, Cd2+ and Cu2+ co-existing soil, the extremely low concentration of 1.24, 6.88 and 1.08 mg kg−1 for Pb2+, Cd2+ and Cu2+ can be reached in 7 days of column leaching experiment. Note that the release of Mg2+ from MIL-101(Fe)@MgFe-LDH was shown to promote pea seedling growth by acting as magnesium fertilizer. Detailed quasi-situ characterization and DFT calculation revealed the mechanism of isomorphic substitution of Mg2+ by Cu2+ accompanied by in-situ conversion to CuFe-LDH, while the formation of CdCO3 and Pb3(CO3)2(OH)2 can be demonstrated. Consequently, simultaneous super-stable mineralization of multiple heavy metals in water and soil can be accomplished.

Preparation of carboxyl-functionalized silica core-shell microspheres and their applications in weak cation exchange chromatography, heavy metal removal, and lysozyme enrichment.

Chromatography is a technique of separation based on adsorption and/or interaction of target molecules with stationary phases. Herein, we report the design and fabrication of BTDA@SiO2 core-shell microspheres as a new class of stationary phase and demonstrate its impressive performance for chromatographic separations. The silica microspheres of BTDA@SiO2 were synthesized by in situ method with 1,3,5-benzenetricarboxaldehyde and 3,5-diaminobenzoic to separate peptides and proteins on high-performance liquid chromatography. The BTDA@SiO2 core-shell structure has a high specific surface area and retention factor of 4.27 and 8.31 for anionic and cationic peptides, respectively. The separation factor and resolution were high as well. A typical chromatogram illustrated nearly baseline resolution of the two peptides in less than 3 min. The BTDA@SiO2 was also highly stable in the pH range of 1 to 14. Furthermore, the prepared BTDA@SiO2 core-shell material not only be used for chromatographic separation but also as heavy metal removal from water. Using a BTDA@SiO2, we also achieved a lysozyme enrichment with a maximum saturated adsorption capacity reaching 714mg/g. In summary, BTDA@SiO2 has great application prospects and significance in separation and purification systems.

Effect of Iron(III) ions on rutile flotation: Surface properties and adsorption mechanism

Various studies have shown that the presence of metal ions in the slurry can significantly impact flotation. However, it was still uncertain how iron, a typical metal ion, affected rutile flotation. Micro-flotation experiments, x-ray photoelectron spectroscopy, icp-oes, solution chemistry calculation, zeta potential and contact angle test were used to explore the effect of iron ions on the surface properties and floatability of rutile in this investigation. Micro-flotation results showed that iron ions not only substantially increased the rutile flotation recovery from 42.27 % to 75.69 % at pH = 4, but also converted the optimal pH of flotation from a point (pH = 4) to a platform (pH = 4–8). Solution chemistry calculations indicated that iron ions could form complexes with hydroxyl to produce FeOH2+, which reacted with benzohydroxamic acid (BHA) to create [Fe(C7H6NO2)2]+ at pH=4–7. The analysis conducted through X-ray photoelectron spectroscopy, coupled with the results obtained from contact angle measurements, revealed that the complex [Fe(C7H6NO2)2]+ had the capability to engage with Ti-OH groups, improving the hydrophobicity of rutile surface. Zeta potential analysis results further illustrated that Fe3+/BHA complexes reinforce the adsorption of BHA and iron ions onto rutile surface by the formation of [Fe(C7H6NO2)2]+. In addition, the O1s peak fitting results and ICP-OES analysis results proved that at the same pH, 60 mg/L was the optimal concentration for iron ion activation, which may be limited by Saturated adsorption capacity of [Fe(C7H6NO2)2]+.

In-depth study of adsorption mechanisms and interactions in the removal of pharmaceutical contaminants via activated carbon: a physicochemical analysis.

This study presents a theoretical analysis of the adsorption process of pharmaceutical pollutants, specifically acetaminophen (ATP) and diclofenac (DFC), onto activated carbon (AC) derived from avocado biomass waste. The adsorption isotherms of ATP and DFC were analyzed using a multilayer model, which revealed the formation of two to four adsorption layers depending on the temperature of the aqueous solution. The saturation adsorption capacities for ATP and DFC were 52.71 and 116.53mg/g, respectively. A steric analysis suggested that the adsorption mechanisms of ATP and DFC involved a multi-molecular process. The calculated adsorption energies (ΔE1 and ΔE2) varied between 12.86 and 22.58kJ/mol, with the highest values observed for DFC removal. Therefore, the adsorption of these organic molecules was associated with physisorption interactions: van der Waals forces and hydrogen bonds. These findings enhance the understanding of the depollution processes of pharmaceutical compounds using carbon-based adsorbents and highlight the potential of utilizing waste biomass for environmental remediation.

Low concentration adsorption of ammonia using metal halide loaded biogas residue-based carbon materials

Treating wastewater with elevated ammonia nitrogen levels in garbage treatment plants is a global concern, with blow-off recognized as an efficient process for nitrogen removal. However, this method generates low-concentration ammonia, presenting a challenge for adequate recovery. This study addresses this issue by impregnating metal halides onto K2CO3-activated biogas residue to create composite materials tailored for adsorbing low-concentration ammonia. We systematically investigated the impact of activation parameters, metal halide type, loading capacity, and environmental conditions on the adsorption properties of the materials. Notably, at an activation temperature of 700 °C, utilizing copper chloride with a loading capacity of 30 %, the material exhibited a saturation adsorption capacity of 29.32 mg/g for 200 ppm NH3, with a breakthrough time of 45.6 min, significantly surpassing the untreated sample and demonstrated excellent regeneration performance. SEM, BET, and FTIR analyses revealed that the material provided dispersion sites for metal halides, promoted the complexation of metal halides and ammonia and retained pores for ammonia diffusion, thereby enhancing adsorption efficiency. This innovative approach contributes to waste utilization and ensures efficient ammonia recovery through metal halide-ammonia complexation.

Mechanism of efficient adsorption for arsenic in aqueous solution by zeolitic imidazolate framework‑8.

Arsenic (As) is one extremely hazardous and carcinogenic metalloid element. Due to mining, metal smelting, and other human activities, the pollution of water (especially groundwater) and soil caused by As is increasingly serious, which badly threatens the environment and human health. In this study, a zeolite imidazolate framework (ZIF-8) was synthesized at room temperature and employed as an adsorbent to facilitate the adsorption of As(III) and As(V) from the solution. The successful synthesis of ZIF-8 was demonstrated by X-ray diffraction (XRD), and scanning electron microscopy (SEM) revealed that its particle size was approximately 80nm. The adsorption kinetics, adsorption isotherm, solution pH, dose, coexisting ions, and the synonymous elements antimony (Sb) were conducted to study the adsorption of As by ZIF-8 nanoparticles. The maximum saturation adsorption capacity was determined to be 101.47mg/g and 81.40mg/g for As(III), and As(V) at initial pH = 7.0, respectively. Apparently, ZIF-8 had a good removal effect on As, and it still maintained a good performance after four cycles. The coexisting ions PO43- and CO32- inhibited the adsorption of both As(III) and As(V). ZIF-8 performed well in removing both As and Sb simultaneously, although the presence of Sb hindered the adsorption of both As(III) and As(V). Both FTIR and XPS indicated the adsorption mechanism of As on ZIF-8: ZIF-8 generates a large amount of Zn-OH on the surface through hydrolysis and partial fracture of Zn-N, both of which form surface complexes with As.

Carboxylic acid modulated in situ growth of Zr-based MOFs on carboxylated cotton fabrics for removal of Cr(VI) from aqueous solutions

In this paper, carboxylated cotton fabric (CF-Ph-COOH) were obtained as active substrate by diazonium radical polymerization modification of cotton fibers. Then the MOF fabric composites were prepared by in situ growth of metal zirconium ions (Zr) and organic ligands on the surface of carboxylated cotton fabrics under carboxylic acid modifier. MOF fabric composites with controllable morphologies structures were achieved by regulating organic ligands, reaction time the type and dosage of regulator (formic acid and acetic acid). The prepared acetic acid regulated MOF fabric composites were designated as CF-HAc1-UiO-66, CF-HAc2-UiO-66, CF-HAc1-UiO-66-NH2, and CF-HAc2-UiO-66-NH2, respectively, and the formic acid regulated as CF-FA-UiO-66 and CF-FA-UiO-66-NH2. The fabricated carboxylic acid modulated MOF fabric composites were well characterized using SEM, TGA, XRD, FTIR, and XPS spectra. The adsorption experiment results show that carboxylic acid modulated Zr based MOF fabric composites can serve as adsorbent for effective removal of Cr(VI) from water, in which the CF-FA-UiO-66-NH2 was prepared under the ratio of ZrCl4 and BDC-NH2 is 1.006 and with 5.47 M formic acid regulator exhibits that the optimal adsorption efficiency and the removal efficiency is 79.5 %. In addition, the adsorption of Cr(VI) in water by CFA-UiO-66-NH2 showed a quasi-secondary kinetic model following the Langmuir adsorption model, showing a a typical of chemisorption. What’s more, the Cr(VI) removal efficiency and saturated adsorption capacity of CF-FA-UiO-66-NH2 was up to 80 % and 318.85 mg/g, respectively. The prepared CF-FA-UiO-66-NH2 MOF fabric composite was recyclable for removal of Cr(VI), and could be used as the potential adsorbent membrane for waste water treatment.

Solvent-free synthesis of defective Zr-based metal–organic framework from waste plastic bottles for highly efficient lomefloxacin removal

Large amount of polyethylene terephthalate (PET) plastics waster and emerging contaminants in water, including fluoroquinolone antibiotics, pose challenges to human survival. In this work, a green synthesis scheme is proposed in which the defective UiO-66 (d-UiO-66) is fabricated via a solvent-free routine by using PET plastics waster as raw materials for lomefloxacin (LOM) removal. In comparison with defect-free UiO-66, the created defect imparts d-UiO-66 with higher porosity and abundant defective Zr sites, which are beneficial to boost LOM adsorption. As expected, d-UiO-66 exhibited excellent LOM adsorption performances, showcasing a saturation adsorption capacity of 588 mg g−1 and a kinetic rate constant of 0.204 g mg−1 h−1, which are 3.5 and 2.0 times higher than those of the pristine UiO-66, respectively. Remarkably, the LOM saturation adsorption capacity of d-UiO-66 surpasses that of all reported adsorbents. Mechanism study reveals that this outstanding adsorption performance of d-UiO-66 is mainly ascribed to the abundant defective sites, high porosity, together with the strong hydrogen bonding interaction and π-π stacking interaction between d-UiO-66 and LOM. Therefore, the d-UiO-66 obtained by the solvent-free method can not only effectively upcycle PET plastic waster, but also efficiently remove LOM, demonstrating a potential routine to simultaneous address the solid PET waster and wastewater.

Resources recovery-rubidium recovery from desalination brine through hydrometallurgy techniques

Because of the water scarcity in many regions, different methods have been implemented to address this problem. The desalination technique is known as a practical solution among them. However, brine from the desalination process, which contains high concentrations of salts, minerals, and chemicals, will cause environmental harm to the sea, soil, and groundwater if it is not properly treated. Therefore, recovering critical resources from brine is essential for reducing brine disposal. This study aims to apply two hydrometallurgy systems, namely ion exchange and ionic liquid extraction, to circulate rubidium resources from brine. Dowex G26 resin was employed in the ion exchange system, and the adsorption isotherm model and saturated adsorption capacity were explored initially. The optimal parameters such as pH value, L/S ratio (liquid/solid), adsorption period, and adsorption temperature will then be investigated. In the ionic liquid extraction process, the t-BAMBP/C2mimNTf2 system (4-tert-Butyl-2-(α-methylbenzyl) phenol/1-ethyl-3-methylimidazolium bis(trifluoromethyls​ulfonyl)​imide) was used, and the parameters including pH value, concentrations of t-BAMBP, (O + I)/A ratio (organic + ionic liquid/aqueous), extraction time, and extraction temperature will be optimized as well. The results reveal that adsorption capacity and extraction efficiencies were 14.3 mg g− 1 and 86%, respectively. Furthermore, suitable reagents, including HCl and HNO3, were applied to desorb and strip rubidium from the Dowex G26 and t-BAMBP/C2mimNTf2 systems. To sum up, environmental hazards of desalination brine and rubidium resources can be reduced and recovered through the two different extraction systems.

An investigation into the effect of UV irradiation and biofilm colonization on adsorption and desorption behavior of polyurethane (PU) microplastics for bisphenol A (BPA)

Recent studies have demonstrated that microplastics (MPs) can act as a transport vector for pollutants in the environment. However, most studies have focused on carbon-carbon backbone polymers, with little known about heteroatom backbone polymers. In this study, polyurethane (PU) MPs were modified by UV irradiation and microorganism colonization to assess the different aging treatments on the interaction behavior (adsorption/desorption) between PU MPs and bisphenol A (BPA). The results of the adsorption kinetics experiment illustrated that the adsorption process of BPA could be described well by a pseudo-second order kinetic equation on both fresh and aged PU MPs. Although fresh PU MPs revealed the highest saturated adsorption capacity, at low BPA exposure concentrations (≤ 100 μg/L) the adsorption capacities for UV aged and biofilm colonized PU MPs were very similar to fresh MPs or even slightly higher than for fresh MPs, the main adsorption mechanisms including H-bonding interactions and π–π interactions. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) investigations suggested obvious physicochemical property changes (e.g., generation of new functional groups, erosion, etc.) after UV irradiation and biofilm colonization. This study also showed that different exposure environments (ultrapure water, artificial seawater, simulated gastric fluid) could affect BPA adsorption/desorption via hydrophobic and electrostatic interaction on PU surfaces. These results further clarify the adsorption mechanisms of BPA on PU MPs that have undergone different aging treatments, and provides a theoretical basis for the assessment of environmental behavior and exposure risks when PU MPs and BPA coexist.

Utilizing Activated Carbon Nanopores for Electrochemical Oxidation of Perylene to Redox-Active 3,10-Perylenedione: Application in Electrochemical Capacitor Electrodes.

We demonstrate that nanopores of activated carbon (AC) function as nanoreactors that oxidize perylene (PER) to a redox-active organic compound, 3,10-perylenedione (PERD), without any metal catalysts or organic solvents. PER is first adsorbed on AC in the gas phase, and the PER-adsorbed AC is subjected to electrochemical oxidation in aqueous H2SO4 as the electrolyte. Because gas-phase adsorption is solvent-free, PER is completely adsorbed on AC as long as the amount of PER does not exceed the saturated adsorption capacity of the AC, which enables accurate control of the amount adsorbed. PER is electrochemically oxidized to PERD in the nanopores of AC at above 0.7 V vs Ag/AgCl. The hybridized PERD undergoes a rapid reversible two-electron redox reaction in the nanopores owing to the large contact interface between the conductive carbon pore surfaces and PERD. The resulting AC/PERD hybrids serve as electrodes for electrochemical capacitors, utilizing the rapid redox reaction of PERD. The hybridization method is advantageous for quantitatively optimizing electrochemical capacitor performance by adjusting the amount of adsorbed PER. Moreover, because PERD hybridization in the AC nanopores does not expand the electrode volume, the volumetric capacitance increases with increasing hybridized PERD content. In three-electrode cell measurements, the volumetric capacitance at 0.05 A g-1 reaches 299 F cm-3, and 61% of this capacitance is retained at 10 A g-1 when 5 mmol of PER is used per gram of AC. Meanwhile, pristine AC delivers 117 F cm-3 at 0.05 A g-1 with a capacitance retention of 46% at 10 A g-1. Two-electrode cell measurements reveal that self-discharge is significantly suppressed by the hybridized PERD when AC/PERD hybrids and AC are used as cathodes and anodes, respectively, compared to that of a symmetrical AC cell. Moreover, PERD does not undergo cross-diffusion in the asymmetrical cells during self-discharge tests for 24 h.

Fe‐La‐Ce‐ZSM‐5 Zeolite for Adsorbing Congo Red

In this experiment, ZSM‐5 molecular sieves are prepared by hydrothermal synthesis and modified by impregnation with Fe, La, and Ce loading. X‐ray diffraction, X‐ray photon‐electron spectroscopy, and scanning electron microscopy show that Fe, La, and Ce elements are successfully loaded onto the surface of the material, and the surface area of Fe‐La‐Ce‐ZSM‐5 is 241.66 m2 g−1. A systematic study on the adsorption of Congo red solution is carried out using Fe‐La‐Ce‐ZSM‐5 molecular sieves and it is found through the adsorption data that the adsorption process is more in line with Langmuir and the proposed second‐order kinetic model, and the theoretical saturated adsorption capacity is 2669.19 mg g−1. The adsorption process is recycled four times and still has more than 60 % removal performance for high‐concentration Congo red solution. The results of this experiment show that Fe‐La‐Ce‐ZSM‐5 molecular sieves show excellent removal performance for Congo red dye in wastewater.

Adsorption performance and mechanism of Arsenic(III) and Arsenic(V) by using copper-manganese binary oxide

ABSTRACT Arsenic contamination threatens the safety of drinking water in many areas of the world. As(V) is less toxic and easier to remove than As(III). Hence, it is essential to oxidise As(III) to As(V). Based on the previous studies, Cu-Mn binary oxide (CMBO) (with a molar ratio of Cu/Mn = 3:1) was prepared by a two-step method. The results showed that CMBO has a large specific surface area (67.74 m2/g) and pore size (16.87 nm). Moreover, CMBO has an inconspicuous crystal structure and abundant hydroxyl groups, which are favourable for arsenic adsorption. The adsorption kinetics results indicated that As(III) was oxidised to As(V) during the adsorption process, and the adsorption rate for As(V) removal was faster than that for As(III) removal. The saturated adsorption capacities of As(III) and As(V) were calculated to be 64.17 mg/g and 84.87 mg/g via the Langmuir isotherm model, respectively. The results of the pH effect studies indicated that acidic conditions promoted the removal of both As(III) and As(V) by CMBO due to the electrostatic attraction. The spectroscopic analysis results demonstrated that Mn oxides within CMBO played a vital role in As(III) oxidation. The removal of As(III) by CMBO was attributed to the synergistic effect of As(III) oxidation by Mn oxides and As sorption by Cu oxides. Overall, CMBO is a promising sorbent with great potential for removing arsenic.

A novel enrichment and sensitive method for rapid determination of 4 sulfonamide antibiotics residues in fish

Sulfonamide antibiotics with superior performance are widely used in aquaculture. However, the residues of sulfonamide antibiotics in aquatic products may pose a threat to human health. In this work, a novel type of magnetic molecularly imprinted polymer (mMIP) was synthesized and coupled with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) for the selective separation and determination of 4 sulfonamide antibiotics residues in tilapia. The structure and adsorption properties of the polymers were characterized and evaluated. The key mMIP variables were investigated to determine the optimal magnetic solid phase extraction conditions. Results showed that the mMIPs had saturated adsorption capacities of 137.4, 78.7, 65.2, and 58.4 mg/g for trimethoprim, sulfadiazine, sulfamethazine, and sulfamethoxazole, respectively. Under optimized conditions, the linear range of the method for the detection of the 4 sulfonamides was 0.1–100 ng mL−1 (R > 0.991), the detection limit was 0.015 μg kg−1 (S/N = 3), the recovery rate was 78.6–101%, and the relative standard deviation (RSD%) was 4.2–7.8%. This new rapid and ultra-sensitive pretreatment method was successfully applied to the monitoring of trace sulfonamide antibiotics residues in fish samples.

Composite modification of fine SiC powder by 3-aminopropyl triethoxysilane and sodium polystyrene sulfonate and its slip casting study

Composite modification of fine SiC powder was implemented by 3-aminopropyl triethoxysilane (KH550) and sodium polystyrene sulfonate (PSS) to improve the dispersion stability of fine powder in water. KH550 was adopted as preliminary modifier and then PSS was used for second modification of KH550-SiC powder. Adsorption studies proved the preliminary modification of KH550 contributed to the adsorption of PSS on SiC particle surface and PSS saturated adsorption capacity was 4.473 mg/g. After KH550 and PSS composite modification, the zeta potential, stability and dispersibility of fine SiC powder were improved. The absolute value of zeta potential of KH550-PSS-SiC particle reached the maximum value of 46.4 mV at pH 12. KH550-PSS-SiC suspension had better stability at the pH range of 2–12. Subsequently, KH550-PSS-SiC powder was mixed with coarse SiC powder to prepare recrystallized SiC (RSiC) green body by slip casting. When the mass ratio of KH550-PSS-SiC powder to coarse SiC powder was 2:3, RSiC slurry with the solid loading of 70 vol% and the viscosity of 636.0 mPa s was obtained and then dense RSiC green body was produced. The density of the prepared RSiC green body was 2.6603 g/cm3 and the relative density was 82.70 %.

Preparation of a Porous Protein-Based Composite Material by In Situ Polymerization of Pickering High Internal Phase Emulsion for Adsorption of Lead Ions.

The preparation of complex porous materials using a small molecular surfactant as the stabilizer of a high internal phase emulsion can result in harm to the environment. In this study, porous composites based on soy protein isolate with poly(acrylic acid) were prepared by in situ polymerization of a high internal phase monomer emulsion with an internal phase volume fraction of 80%. The material was prepared from acrylic acid and an N,N-methyl diacrylic acid monomer solution as the continuous phase, peanut oil as the dispersed phase, and soy protein isolate as the composite stabilizer. Scanning electron microscopy showed that porous composites exhibited a concave/convex three-dimensional interpenetrating pore structure. Fourier-transform infrared spectra revealed the existence of many active groups such as carboxyl, amino, hydroxyl, and sulfhydryl. The composite had a high adsorption capacity for lead ions, even at low concentration, with a removal rate of up to 95.7%. The adsorption process conformed to a two-stage model involving internal diffusion and Langmuir isothermal adsorption. The maximum saturated adsorption capacity was 36.71 mg/g when the initial solution concentration was 150 mg/L, the adsorbent concentration was 7.0 g/L, and the adsorption mechanism involved chemical interactions between the lead ions and the composite groups -COOH, -OH, and -SH.

A (3,12)-connected metal-organic framework based on hexanuclear zinc cluster for iodine capture

The adsorption of discharged radioactive iodine is considered an important method to address this environmental problem. Metal-organic framework (MOF) materials are expected to be potential materials for capturing iodine. In this work, a new zinc-based MOF, namely [Zn6(OH)6(DMTDC)3(TPB)]·0.5DMF (JOU-31), was successfully prepared under solvothermal condition (H2DMTDC = 3,4-dimethylthieno [2,3-b]thiophene-2,5-dicarboxylic acid, TPB = 1,3,5-tris(4-pyridyl)benzene, DMF = N,N-Dimethylformamide). Structural analyses revealed that JOU-31 was a three-dimensional porous structure based on hexanuclear zinc-oxide clusters. Topologically, the framework of JOU-31 can be simplified to a (3,12)-connected net with new Schläfli symbol of {43·630}{43}2. Due to its large specific surface area, abundant electron-rich N/S sites, and high stability, JOU-31 was applied to capture iodine. The saturated iodine adsorption capacity of JOU-31 in n-hexane solution was 822 mg g−1. In addition, the interaction mechanism between JOU-31 and the adsorbed iodine was further explored in detail. This work provides a valuable clue for the preparation of new MOFs for iodine adsorption.

Optimization of CO2/N2 injection ratios in goaf by saturation adsorption capacity

The inerting technology is a common means to prevent fires in goaf of coal mine, in which adsorption capacity is the key index to measure the inerting effect. Therefore, this paper obtained the coal spontaneous combustion (CSC) stage of Qianyingzi coal mine through programmed heating experiments, and determined the physical adsorption stage temperature (below 323.15 K) matching the actual environment. The oxidation characteristics of coal samples with different adsorption degrees were further studied by adsorption experiment and TG-DSC test. The results indicate that the combustion activation energy of coal samples follows the sequence of second-stage adsorption coal > dried coal > raw coal > first-stage adsorption coal. This implies that the CO2 saturated adsorption can exert a specific inhibitory impact on coal combustion. Therefore, the index of the saturation adsorption capacity (SAC) was proposed to evaluate the inerting effect. We further studied the adsorption capacity of coal at different ratios of CO2/N2 by molecular simulation under different pressures (0–5 MPa). The results show that CO2 dominates in both single-component adsorption and competitive saturated adsorption. The average of ratios (AOR) and average of differences (AOD) threshold are determined. The priority of SAC is obtained in the order of single-component (CS), CO2/N2 mixture ratio at 4:6 (C4:6), CO2/N2 mixture ratio at 2:8 (C2:8) from largest to smallest. Furthermore, a fuzzy optimization method for injection ratio of CO2/N2 under different pressures was established. During dynamic changes in environmental pressure, it is appropriate to inject CO2 separately at 0.2–2.5 MPa. At 3 MPa, a mixture of CO2/N2 at a ratio of 2:8 is the best for prevent fires in goaf. Similarly, an inert gas with a CO2/N2 ratio of 4:6 is injected at 3–5 MPa.

Ultrahigh-Efficient N,O-Functionalized covalent organic framework towards thorium adsorption from uranium and rare earth elements

The development of novel porous materials as adsorbents for highly effective separation of thorium from ore or nuclear wastewater co-existing with uranium and rare earth elements is one of the most desirable methods but remains challenging. In this work, we prepare a N,O-functionalized two-dimensional covalent organic framework (2D COF), namely TAPT-DHTA, with a permanent porous structure and plenty of nitrogen and oxygen adsorption sites throughout the skeletons, which displays an ultrahigh Th(IV) saturated adsorption capacity of 1394 mg g−1 (at pH = 4.0), higher than all adsorbents reported so far. Moreover, the TAPT-DHTA COF has a large distribution coefficient (Kd) of up to 5.2 × 104 mL g−1, implying its extremely strong affinity for Th(IV) due to the collaborative coordination interactions between N/O atoms and Th(IV) as well as their specific binding mechanism. The distinguished adsorption behavior of the TAPT-DHTA COF affords an important platform for highly selective separation of Th(IV) from uranium and rare earth elements, thereby shedding some light on the design of novel adsorbents for thorium separation in the thorium fuel cycle.

A Polyzwitterionic@MOF Hydrogel with Exceptionally High Water Vapor Uptake for Efficient Atmospheric Water Harvesting.

Atmospheric water harvesting (AWH) is considered a promising strategy for sustainable freshwater production in landlocked and arid regions. Hygroscopic salt-based composite sorbents have attracted widespread attention for their water harvesting performance, but suffer from aggregation and leakage issues due to the salting-out effect. In this study, we synthesized a PML hydrogel composite by incorporating zwitterionic hydrogel (PDMAPS) and MIL-101(Cr) as a host for LiCl. The PML hydrogel was characterized using various techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and thermogravimetric analysis (TGA). The swelling properties and water vapor adsorption-desorption properties of the PML hydrogel were also assessed. The results demonstrate that the MIL-101(Cr) was uniformly embedded into PDMAP hydrogel, and the PML hydrogel exhibits a swelling ratio of 2.29 due to the salting-in behavior. The PML hydrogel exhibited exceptional water vapor sorption capacity of 0.614 g/g at 298 K, RH = 40% and 1.827 g/g at 298 K, RH = 90%. It reached 80% of its saturated adsorption capacity within 117 and 149 min at 298 K, RH = 30% and 90%, respectively. Additionally, the PML hydrogel showed excellent reversibility in terms of water vapor adsorption after ten consecutive cycles of adsorption-desorption. The remarkable adsorption capacity, favorable adsorption-desorption rate, and regeneration stability make the PML hydrogel a potential candidate for AWH. This polymer-MOF synergistic strategy for immobilization of LiCl in this work offers new insights into designing advanced materials for AWH.