Adsorption performance and mechanism of Arsenic(III) and Arsenic(V) by using copper-manganese binary oxide

Abstract

ABSTRACT Arsenic contamination threatens the safety of drinking water in many areas of the world. As(V) is less toxic and easier to remove than As(III). Hence, it is essential to oxidise As(III) to As(V). Based on the previous studies, Cu-Mn binary oxide (CMBO) (with a molar ratio of Cu/Mn = 3:1) was prepared by a two-step method. The results showed that CMBO has a large specific surface area (67.74 m2/g) and pore size (16.87 nm). Moreover, CMBO has an inconspicuous crystal structure and abundant hydroxyl groups, which are favourable for arsenic adsorption. The adsorption kinetics results indicated that As(III) was oxidised to As(V) during the adsorption process, and the adsorption rate for As(V) removal was faster than that for As(III) removal. The saturated adsorption capacities of As(III) and As(V) were calculated to be 64.17 mg/g and 84.87 mg/g via the Langmuir isotherm model, respectively. The results of the pH effect studies indicated that acidic conditions promoted the removal of both As(III) and As(V) by CMBO due to the electrostatic attraction. The spectroscopic analysis results demonstrated that Mn oxides within CMBO played a vital role in As(III) oxidation. The removal of As(III) by CMBO was attributed to the synergistic effect of As(III) oxidation by Mn oxides and As sorption by Cu oxides. Overall, CMBO is a promising sorbent with great potential for removing arsenic.