Adsorption of Co2+ and Cr3+ in Industrial Wastewater by Magnesium Silicate Nanomaterials.

Abstract

In this paper, two flower-like magnesium silicate nanomaterials were prepared. These and another two commercial magnesium silicate materials were characterized using a scanning electron microscope, the N2 adsorption-desorption method, and other methods. The structure-activity relationship between the adsorption performance of these four magnesium silicate materials and their specific surface area, pore size distribution, and pore structure was compared. The results showed that the 3-FMS modified by sodium dodecyl sulfonate (SDS) had the largest specific surface area and pore size, the best adsorption performance, and the largest experimental equilibrium adsorption capacity (qe,exp) for Co2+, reaching 190.01 mg/g, and Cr3+, reaching 208.89 mg/g. The adsorption behavior of the four materials for Co2+ and Cr3+ both fitted the pseudo-second-order kinetic model and Langmuir adsorption model, indicating that chemical monolayer uniform adsorption was the dominant adsorption process. Among them, the theoretical adsorption capacity (qm) of 3-FMS was the highest, reaching 207.62 mg/g for Co2+ and 230.85 mg/g for Cr3+. Through further research, it was found that the four materials mainly removed Co2+ and Cr3+ through electrostatic adsorption, surface metal ions (Mg2+), and acidic groups (-OH and -SO3H) exchanging with ions in solution. The adsorption performance of two self-made flower-like magnesium silicate materials for Co2+ and Cr3+ was superior to that of two commercial magnesium silicates.