Human Osteosarcoma Cell Line Saos-2 Research Articles

Polyacrylonitrile‒Chitosan IPN composite scaffolds that closely mimic the human trabecular bone structure for tissue engineering

Successful bone tissue engineering involves managing several important parameters, such as the design of intercommunicating porous structures, pore sizes, and the material and mechanical suitability of the material. In our work, we focused on the preparation of a synthetic scaffold that morphologically mimics the structure of human trabecular bone. The scaffolds were fabricated through the thermal modification (TM) of polyacrylonitrile. The scaffold strength was supported by a crosslinked chitosan supporting network. The prepared scaffold has imprinted pores of the appropriate size to facilitate the ingrowth and proliferation of human osteoblasts throughout the entire pore volume created by a primary porogen, sodium chloride. The resulting material has a dual porous morphological structure, in which adjustable larger pores support cellular ingrowth into the scaffold, whereas smaller pores, created using succinonitrile (SCN) as a secondary porogen, increase the diffusion of oxygen and nutrients to developing cells. The mechanical properties of the scaffold were promoted by the use of a secondary interpenetrating network (IPN) based on chitosan. The incorporation of secondary IPNs led to a significant improvement in the mechanical characteristics of the scaffold. Two crosslinking agents were used: the widely utilized glutaraldehyde (GA) and its green, nontoxic alternative, genipin (GEN).The current study introduces a synthetic scaffold that effectively mimics the structure of human trabecular bone, providing a conducive environment for osteoblast proliferation and ingrowth. We incorporated a dual porous morphology and a secondary IPN based on chitosan and found that the scaffold exhibited improved mechanical properties and nutrient diffusion capabilities. This research highlights the potential of these scaffolds for major advancements in bone tissue engineering, demonstrating their noncytotoxic nature and ability to support the adhesion and proliferation of the human osteosarcoma cell line SAOS-2. The described scaffold preparation technique may offer distinct advantages over current high-end methods such as 3D printing. The primary benefit lies in its very simple instrumentation, which enables the creation of a complex trabecular bone morphology with both macro- and microporosity in the bulk, which is still challenging for common 3D printers. Additionally, IPN with chitosan can be postmodified, substantially expanding the potential applications of these scaffolds.

Characterization of Iron Oxide Nanotubes Obtained by Anodic Oxidation for Biomedical Applications-In Vitro Studies.

To improve the biocompatibility and bioactivity of biodegradable iron-based materials, nanostructured surfaces formed by metal oxides offer a promising strategy for surface functionalization. To explore this potential, iron oxide nanotubes were synthesized on pure iron (Fe) using an anodic oxidation process (50 V-30 min, using an ethylene glycol solution containing 0.3% NH4F and 3% H2O, at a speed of 100 rpm). A nanotube layer composed mainly of α-Fe2O3 with diameters between 60 and 70 nm was obtained. The effect of the Fe-oxide nanotube layer on cell viability and morphology was evaluated by in vitro studies using a human osteosarcoma cell line (SaOs-2 cells). The results showed that the presence of this layer did not harm the viability or morphology of the cells. Furthermore, cells cultured on anodized surfaces showed higher metabolic activity than those on non-anodized surfaces. This research suggests that growing a layer of Fe oxide nanotubes on pure Fe is a promising method for functionalizing and improving the cytocompatibility of iron substrates. This opens up new opportunities for biomedical applications, including the development of cardiovascular stents or osteosynthesis implants.

Allicin affects immunoreactivity of osteosarcoma cells through lncRNA CBR3-AS1

ObjectiveTo analyze the effect of allicin on the immunoreactivity of osteosarcoma (OS) cells and further explore whether its mechanism is related to the long non-coding Ribonucleic Acid (lncRNA) CBR3-AS1/miR-145-5p/GRP78 axis, so as to provide clinical evidence. MethodsThe human OS cell line Saos-2 was treated with allicin at 25, 50, and 100 μmol/L, respectively, to observe changes in cell biological behaviors. Subsequently, CBR3-AS1 abnormal expression vectors were constructed and transfected into Saos-2 to discuss their influence on OS. Furthermore, the regulatory relationship between allicin and the CBR3-AS1/miR-145-5p/GRP78 axis was validated by rescue experiments. Finally, a nude mice tumorigenesis experiment was carried out to analyze the effects of allicin and CBR3-AS1/miR-145-5p/GRP78 axis on the growth of living tumors. Alterations in T-lymphocyte subsets were also detected to assess the effect of allicin on OS immunoreactivity. ResultsWith the increase of allicin concentration, Saos-2 activity decreased and apoptosis increased (P < 0.05). In addition, the expression of CBR3-AS1 and GRP78 decreased after allicin intervention, while miR-145-5p increased (P < 0.05). Silencing CBR3-AS1 led to reduced Saos-2 activity, enhanced apoptosis, and activated mitophagy and endoplasmic reticulum stress (P < 0.05). In the rescue experiment, the effect of CBR3-AS1 on OS cells was reversed by silencing miR-145-5p, while the impact of miR-145-5p was reversed by GRP78. Finally, the tumorigenesis experiment in nude mice confirmed the regulatory effects of allicin and CBR3-AS1/miR-145-5p/GRP78 on tumor growth in vivo. Meanwhile, it was seen that allicin activated CD4+CD8+ in OS mice, confirming that allicin has the effect of activating OS immunoreactivity. ConclusionsAllicin activates OS immunoreactivity and induces apoptosis through the CBR3-AS1/miR-145-5p/GRP78 molecular axis.

Self-Assembled Hydrogel Membranes with Structurally Tunable Mechanical and Biological Properties.

Using supramolecular self-assembled nanocomposite materials made from protein and polysaccharide components is becoming more popular because of their unique properties, such as biodegradability, hierarchical structures, and tunable multifunctionality. However, the fabrication of these materials in a reproducible way remains a challenge. This study presents a new evaporation-induced self-assembly method producing layered hydrogel membranes (LHMs) using tropocollagen grafted by partially deacetylated chitin nanocrystals (CO-g-ChNCs). ChNCs help stabilize tropocollagen's helical conformation and fibrillar structure by forming a hierarchical microstructure through chemical and physical interactions. The LHMs show improved mechanical properties, cytocompatibility, and the ability to control drug release using octenidine dihydrochloride (OCT) as a drug model. Because of the high synergetic performance between CO and ChNCs, the modulus, strength, and toughness increased significantly compared to native CO. The biocompatibility of LHM was tested using the normal human dermal fibroblast (NHDF) and the human osteosarcoma cell line (Saos-2). Cytocompatibility and cell adhesion improved with the introduction of ChNCs. The extracted ChNCs are used as a reinforcing nanofiller to enhance the performance properties of tropocollagen hydrogel membranes and provide new insights into the design of novel LHMs that could be used for various medical applications, such as control of drug release in the skin and bone tissue regeneration.

Osteosarcoma cell death induced by innovative scaffolds doped with chemotherapeutics.

Osteosarcoma (OS) cancer treatments include systemic chemotherapy and surgical resection. In the last years, novel treatment approaches have been proposed, which employ a drug-delivery system to prevent offside effects and improves treatment efficacy. Locally delivering anticancer compounds improves on high local concentrations with more efficient tumour-killing effect, reduced drugs resistance and confined systemic effects. Here, the synthesis of injectable strontium-doped calcium phosphate (SrCPC) scaffold was proposed as drug delivery system to combine bone tissue regeneration and anticancer treatment by controlled release of methotrexate (MTX) and doxorubicin (DOX), coded as SrCPC-MTX and SrCPC-DOX, respectively. The drug-loaded cements were tested in an in vitro model of human OS cell line SAOS-2, engineered OS cell line (SAOS-2-eGFP) and U2-OS. The ability of doped scaffolds to induce OS cell death and apoptosis was assessed analysing cell proliferation and Caspase-3/7 activities, respectively. To determine if OS cells grown on doped-scaffolds change their migratory ability and invasiveness, a wound-healing assay was performed. In addition, the osteogenic potential of SrCPC material was evaluated using human adipose derived-mesenchymal stem cells. Osteogenic markers such as (i) the mineral matrix deposition was analysed by alizarin red staining; (ii) the osteocalcin (OCN) protein expression was investigated by enzyme-linked immunosorbent assay test, and (iii) the osteogenic process was studied by real-time polymerase chain reaction array. The delivery system induced cell-killing cytotoxic effects and apoptosis in OS cell lines up to Day 7. SrCPC demonstrates a good cytocompatibility and it induced upregulation of osteogenic genes involved in the skeletal development pathway, together with OCN protein expression and mineral matrix deposition. The proposed approach, based on the local, sustained release of anticancer drugs from nanostructured biomimetic drug-loaded cements is promising for future therapies aiming to combine bone regeneration and anticancer local therapy.

Surface modification of Ti40Cu40Zr11Fe3Sn3Ag3 amorphous alloy for enhanced biocompatibility in implant applications

This study focuses on the design of a new Ti based multicomponent amorphous alloy for the development of biocompatible implant materials with enhanced hemocompatibility and cytocompatibility. While this class of amorphous alloys has shown its potential for biomedical implant applications, there are major concerns due to the presence of elements such as copper which can lead to cytotoxicity in the human body during long term implantation. Nevertheless, copper is indispensable in the development of an amorphous alloy. Thus, the objective of this work is to selectively remove copper from the surface of the Ti40Cu40Zr11Fe3Sn3Ag3 (at%) amorphous alloy using the dealloying technique and produce a patterned protective passivated surface rich in Ti and Zr oxides. Nitric acid (HNO3) has been found to be effective in depleting copper from the sample surface. Optimization of treatment parameters such as temperature (70 °C and room temperature) yielded drastic differences in the morphology of the samples studied using Field-Emission Scanning Electron Microscopy. The treated sample surface demonstrated good hemocompatibility and cytocompatibility with primary human osteoblast cells (HOb) and human osteosarcoma cell line (Saos-2). Additionally, the treated samples showed higher ability to produce reactive oxygen species with respect to pristine samples, which could be convenient for preserving the implant from bacterial contamination. These findings contribute to the advancement of producing copper-depleted nanostructured Ti based amorphous alloys for biomedical implant applications.

Genistein Induces Antiproliferative Activity and Apoptosis in Human Osteosarcoma Saos-2 Cells.

Genistein (4', 5, 7-trihydroxyisoflavone) and daidzein (4', 7-dihydroxyisoflavone) are isoflavones derived from soybean and have anti-cancer effects in various cells. However, the effects of genistein and daidzein on the human osteosarcoma cell line Saos-2 has not been investigated before. Human osteosarcoma Saos-2 cells were treated with genistein for 24 and 48 hours. Cytotoxicity and apoptosis were measured. Genistein significantly inhibited proliferation of Saos-2 cells stronger than daidzein in a dose-dependent manner (0 to 80 μM). Genistein also significantly suppressed Saos-2 cell viability in a dose-dependent manner (0 to 100 μM). In contrast, daidzein did not affect Saos-2 cell viability. Real-time PCR revealed that genistein caused G1-arrest by increasing the expression of p21 and p27 mRNAs in Saos-2 cells. In addition, genistein induced apoptosis through the up-regulation of effector caspase-3/7 activity in Saos-2 cells. Genistein also enhanced initiator caspase-9 and TNF-α mRNA expression in cells. Genistein may inhibit proliferation through the up-regulation of p21 and p27 and viability by inducing apoptosis in Saos-2 cells.

Combinatorial anticancer effects of multi metal ion and drug substitute with hydroxyapatite coatings on surgical grade 316LSS stainless steel alloys towards biomedical applications

The present study highlights the metal ions and existing drug ampicillin-loaded nano-hydroxyapatite (nHAP) coated on 316 stainless steel alloy (316LSS) using the electrodeposition method. In addition, the sample phase purity and crystallinity of the HAp composite coatings on 316LSS were analyzed by X-ray diffraction analysis (XRD) and Fourier transform infrared (FT-IR) spectroscopy using the KBr pellet method. The coating microstructure/morphology was characterized using a scanning electron microscope, which showed a flower-like morphology with the attachment of energy-dispersive X-ray spectroscopy (EDX) to confirm the major element groups in the synthesized sample. The TGA results showed that weight loss occurred in the temperature range of up to 800 °C for oxidation and reduction reactions. Additionally, the beat-optimized nanomaterial showed promising in vitro bioactivity against disease-causing microorganisms, displaying a significant zone of inhibition. Furthermore, cytotoxicity assessment using the MTT assay demonstrated that the synthesized samples effectively inhibited cell proliferation in human osteosarcoma cell lines (Saos-2). AO/EB double staining performed under a fluorescence microscope indicated changes in the morphology of the apoptotic cell nuclei. In addition, the relationship between ROS and nanomaterial-induced apoptosis in Saos-2 cells was analyzed by flow cytometry. MMP (ΔѰmt) profiling showed that the HAp composite increased the effective mitochondrial membrane damage or depolarization in the human osteosarcoma cell line. Moreover, the TUNEL assay suggested that treated nanomaterial with Saos-2 cells showed enhanced green fluorescence intensity, indicating terminal DNA damage. The obtained results meet the recommended physiological standard for synthesized 316LSS HAp composites to guide bone tissue regeneration.

Boldine Treatment Induces Cytotoxicity in Human Colorectal Carcinoma and Osteosarcoma Cells.

Introduction Cancer continues to be a significant health issue worldwide, with colorectal cancer (CRC) standing out as one of the most prevalent forms of cancer on a global scale. The lifetime risk of developing CRC is about one in 23 (4.3%) for men and one in 25 (4.0%) for women. Moreover, children and adolescents are frequently reported with osteosarcoma with a low five-year survival rate (69% and 67%, respectively). Aim The aim of the study was to analyze the cytotoxic effects of boldine against human CRC (HCT-116) and osteosarcoma cell lines (Saos-2). Materials and methods HCT-116 and Saos-2 cell lines were subjected to different concentrations of boldine treatment (5, 10, 20, 30, 40, and 50 μg/mL) and (10, 20, 40, 60, and 80 µg/mL), respectively, for 24 hours. The cytotoxicity was analyzed by MTT assay, AO/EBstaining, DCFH-DA assay, and scratch assay. Results The MTT assay, microscopic analysis, and staining showed that boldine had dose-dependent cytotoxic effects against HCT-116 and Saos-2 cell lines by inhibiting their proliferation, viability, and migration, and inducing ROS-mediated apoptosis. Conclusion The study concluded that boldine had a concentration-dependent cytotoxic effect on human CRC and osteosarcoma cell lines.

Menthol causes mitochondrial Ca2+-influx, affects structure-function relationship and cools mitochondria

Menthol is a small bioactive compound able to cause several physiological changes and has multiple molecular targets. Therefore, cellular response against menthol is complex, and still poorly understood. In this work, we used a human osteosarcoma cell line (Saos-2) and analysed the effect of menthol, especially in terms of cellular, subcellular and molecular aspects. We demonstrate that menthol causes increased mitochondrial Ca2+ in a complex manner, which is mainly contributed by intracellular sources, including ER. Menthol also changes the Ca2+-load of individual mitochondrial particles in different conditions. Menthol increases ER-mito contact points, causes mitochondrial morphological changes, and increases mitochondrial ATP, cardiolipin, mitochondrial ROS and reduces mitochondrial membrane potential (ΔΨm). Menthol also prevents the mitochondrial quality damaged by sub-lethal and lethal doses of CCCP. In addition, menthol lowers the mitochondrial temperature within cell and also serves as a cooling agent for the isolated mitochondria in a cell free system too. Notably, menthol-induced reduction of mitochondrial temperature is observed in diverse types of cells, including neuronal, immune and cancer cells. As the higher mitochondrial temperature is a hallmark of several inflammatory, metabolic, disease and age-related disorders, we propose that menthol can serve as an active anti-aging compound against all these disorders. These findings may have relevance in case of several pharmacological and clinical applications of menthol. Significance statementMenthol is a plant-derived bioactive compound that is widely used for several physiological, behavioural, addictive, and medicinal purposes. It is a well-established “cooling and analgesic agent”. However, the exact cellular and sub-cellular responses of menthol is poorly understood. In this work, we have characterized the effects of menthol on mitochondrial metabolism. Menthol regulates mitochondrial Ca2+, ATP, superoxides, cardiolipin, membrane-potential, and ER-mito contact sites. Moreover, the cooling agent menthol also cools down mitochondria and protects mitochondrial damage by certain toxins. These findings may promote use of menthol as a useful supplementary agent for anti-aging, anti-cancer, anti-inflammatory purposes where higher mitochondrial temperature is prevalent.

Cowpea isoflavones enhance the osteoblast differentiation and antioxidant capacity in synergy with vitamin D and β-carotene: A mechanistic in vitro study.

Background: Osteoporosis (OS) is a pathological condition that makes bones susceptible to fractures by affecting the balance between bone formation and resorption. Recent literature uncovered the possible potential of bioactive compounds with antioxidant mechanisms to counter the issue. Cowpea (CP) isoflavones based on our previous study, vitamin D and natural antioxidant β-carotene for its pleotropic protective effects were assessed alone and in combination. Aim: The study aims to assess the antioxidant and osteoblast differentiation abilities of cowpea isoflavones alone and in combination of vitamin D (VD) and β-carotene (BC) in the human osteosarcoma cell line Saos2. Methods: Saos2 cells were maintained in cell culture conditions and concentrations of CP extract (genistein + daidzein), BC and VD required to increase cell proliferation were estimated using MTT assay. Upon treating cells with the EC50 concentrations, lysates were prepared and levels of alkaline phosphatase (ALP) and osteocalcin were evaluated using ELISA. Oxidative stress parameters and osteoblast differentiation markers were evaluated. Results: CP extract (genistein + daidzein), BC and VD concentrations which enhanced the cell proliferation rate were determined and elevated levels of ALP and osteocalcin upon treatment was observed. Anti-oxidant stress parameters studied showed an increase in cells upon treatment compared to control. Significant alterations in levels of protein involved in osteoblast differentiation are observed upon treatment. Conclusion: Cowpea isoflavones has shown a significant activity against OS by elevating antioxidant parameters and inducing osteoblast differentiation in the present study.

Comparative Study of Ozonated Glycerol and Macrogol Ointment on Bone Matrix Production by Human Osteosarcoma Cell Line Saos-2.

Ozonated glycerol is glycerol containing ozone, has no unpleasant odor, and has a long half-life. To apply ozonated glycerol for clinical use, ozonated macrogol ointment has been developed by adding macrogol ointment to ozonated glycerol to increase the retention in the affected area. However, the effects of ozone on this macrogol ointment were unclear. The viscosity of the ozonated macrogol ointment was approximately two times higher than that of ozonated glycerol. The effect of the ozonated macrogol ointment on the human osteosarcoma cell line Saos-2 (Saos-2 cells) proliferation, type 1 collagen production, and alkaline phosphatase (ALP) activity were studied. The proliferation of Saos-2 cells was assessed using MTT and DNA synthesis assays. Type 1 collagen production and ALP activity were studied using ELISA and ALP assays. Cells were treated for 24 h with or without 0.05, 0.5, or 5 ppm ozonated macrogol ointment. The 0.5 ppm ozonated macrogol ointment significantly elevated Saos-2 cell proliferation, type 1 collagen production, and ALP activity. These results also showed almost the same trend as for ozonated glycerol.

Exosome-Functionalized, Drug-Laden Bone Substitute along with an Antioxidant Herbal Membrane for Bone and Periosteum Regeneration in Bone Sarcoma.

Developing advanced methods for effective bone reconstructive strategies in case of critical bone defects caused by tumor resection, trauma, and other implant-related complications remains a challenging problem in orthopedics. In the clinical management of bone diseases, there is a paradigm shift in using local drugs at the injury site; however, the dead space created during the surgical debridement of necrotic bone and soft tissues (periosteum and underlying muscle) leads to ineffective bone formation, thereby leading to secondary complications, and thus calls for better regenerative approaches. In this study, we have utilized an exosome-functionalized doxorubicin-loaded biodegradable nanocement (NC)-based carrier along with a Cissus quadrangularis (CQ) extract-laden antioxidant herbal membrane for simultaneously managing the periosteum as well as bone formation in the tumor resection model of osteosarcoma. We initially evaluated the efficacy of scaffolds for in vitro mineralization and bone formation. To examine the in vivo effectiveness, we developed a human osteosarcoma cell line (Saos-2)-induced tumor xenograft model with a critical-sized bone defect. The findings revealed that doxorubicin released from NC was successful in killing the tumor cells and was present even after 30 days of implantation. Additionally, the incorporation of exosomes aided the bone formation, resulting in around a 2.6-fold increase in the bone volume compared to the empty group as evaluated by micro-CT. The herbal membrane assisted in the development of periosteum and mineralizing bone callous as validated through histological and immunofluorescence analysis. Thus, our findings describe a one-step biomaterial-based cell-free approach to regenerate bone in osteosarcoma and prevent further fracture due to the complete development of periosteum and lost bone.

A comparative analysis of 3D printed scaffolds consisting of poly(lactic-co-glycolic) acid and different bioactive mineral fillers: aspects of degradation and cytocompatibility.

Their excellent mechanical properties, degradability and suitability for processing by 3D printing technologies make the thermoplastic polylactic acid and its derivatives favourable candidates for biomaterial-based bone regeneration therapies. In this study, we investigated whether bioactive mineral fillers, which are known to promote bone healing based on their dissolution products, can be integrated into a poly(L-lactic-co-glycolic) acid (PLLA-PGA) matrix and how key characteristics of degradation and cytocompatibility are influenced. The polymer powder was mixed with particles of CaCO3, SrCO3, strontium-modified hydroxyapatite (SrHAp) or tricalcium phosphates (α-TCP, β-TCP) in a mass ratio of 90 : 10; the resulting composite materials have been successfully processed into scaffolds by the additive manufacturing method Arburg Plastic Freeforming (APF). Degradation of the composite scaffolds was investigated in terms of dimensional change, bioactivity, ion (calcium, phosphate, strontium) release/uptake and pH development during long-term (70 days) incubation. The mineral fillers influenced the degradation behavior of the scaffolds to varying degrees, with the calcium phosphate phases showing a clear buffer effect and an acceptable dimensional increase. The amount of 10 wt% SrCO3 or SrHAp particles did not appear to be appropriate to release a sufficient amount of strontium ions to exert a biological effect in vitro. Cell culture experiments with the human osteosarcoma cell line SAOS-2 and human dental pulp stem cells (hDPSC) indicated the high cytocompatibility of the composites: For all material groups cell spreading and complete colonization of the scaffolds over the culture period of 14 days as well as an increase of the specific alkaline phosphatase activity, typical for osteogenic differentiation, were observed.

Preparation, Optimisation, and In Vitro Evaluation of [18F]AlF-NOTA-Pamidronic Acid for Bone Imaging PET.

[18F]sodium fluoride ([18F]NaF) is recognised to be superior to [99mTc]-methyl diphosphate ([99mTc]Tc-MDP) and 2-deoxy-2-[18F]fluoro-D-glucose ([18F]FDG) in bone imaging. However, there is concern that [18F]NaF uptake is not cancer-specific, leading to a higher number of false-positive interpretations. Therefore, in this work, [18F]AlF-NOTA-pamidronic acid was prepared, optimised, and tested for its in vitro uptake. NOTA-pamidronic acid was prepared by an N-Hydroxysuccinimide (NHS) ester strategy and validated by liquid chromatography-mass spectrometry analysis (LC-MS/MS). Radiolabeling of [18F]AlF-NOTA-pamidronic acid was optimised, and it was ensured that all quality control analysis requirements for the radiopharmaceuticals were met prior to the in vitro cell uptake studies. NOTA-pamidronic acid was successfully prepared and radiolabeled with 18F. The radiolabel was prepared in a 1:1 molar ratio of aluminium chloride (AlCl3) to NOTA-pamidronic acid and heated at 100 °C for 15 min in the presence of 50% ethanol (v/v), which proved to be optimal. The preliminary in vitro results of the binding of the hydroxyapatite showed that [18F]AlF-NOTA-pamidronic acid was as sensitive as [18F]sodium fluoride ([18F]NaF). Normal human osteoblast cell lines (hFOB 1.19) and human osteosarcoma cell lines (Saos-2) were used for the in vitro cellular uptake studies. It was found that [18F]NaF was higher in both cell lines, but [18F]AlF-NOTA-pamidronic acid showed promising cellular uptake in Saos-2. The preliminary results suggest that further preclinical studies of [18F]AlF-NOTA-pamidronic acid are needed before it is transferred to clinical research.

Fabrication and characterization of strontium substituted chitosan modify hydroxyapatite for biomedical applications

The present study aimed to preparation of hydroxyapatite using strontium (Sr2+) and chitosan (CS) for the preparation of porous scaffold material like SrHA-CS. These synthesized nano-materials were alsofurther characterized by Fourier transform infrared spectroscopy and X-ray diffraction analysis to confirm the phase purity and crystallinity. The crystal-like morphology of the SrHA-CS was observed using a high-resolution transmission electron microscope (HRTEM) which revealed rod-like morphology with the major elements confirmed by energy-dispersive X-ray spectroscopy (EDX). The size of the synthesized nanomaterial and their stability were analyzed through dynamic light scattering (DLS)and zeta potential. The hemolytic study indicates that SrHA-CS is non-toxic red blood cells of the humans. Besides, SrHA-CS is also active on disease-causing microorganisms and exhibit a strong zone of inhibition. The cytotoxic (MTT) assay systemically investigatedthe synthesized samplesagainst SaOS-2 human osteosarcoma cell lines it resulting in effectively induce cell proliferation without generating any harmful effect. The acridine orange/Ethidium bromide dual staining (AO/EB) under the fluorescence microscope data suggests that apoptotic cell nuclei became irregularly changed. Our present study findings concluded that the strongly recommend the developed SrHA-CSscaffold excellent materialhas mechanical and functional properties including biological activities while compared to other synthetic nano-materials. Hence, the synthesizedSrHA-CSmaterial can be considered as a promising cost-effective nano-material for human bone regenerative applications.

TBP, PPIA, YWHAZ and EF1A1 Are the Most Stably Expressed Genes during Osteogenic Differentiation

RT-qPCR is the gold standard and the most commonly used method for measuring gene expression. Selection of appropriate reference gene(s) for normalization is a crucial part of RT-qPCR experimental design, which allows accurate quantification and reliability of the results. Because there is no universal reference gene and even commonly used housekeeping genes’ expression can vary under certain conditions, careful selection of an appropriate internal control must be performed for each cell type or tissue and experimental design. The aim of this study was to identify the most stable reference genes during osteogenic differentiation of the human osteosarcoma cell lines MG-63, HOS, and SaOS-2 using the geNorm, NormFinder, and BestKeeper statistical algorithms. Our results show that TBP, PPIA, YWHAZ, and EF1A1 are the most stably expressed genes, while ACTB, and 18S rRNA expressions are most variable. These data provide a basis for future RT-qPCR normalizations when studying gene expression during osteogenic differentiation, for example, in studies of osteoporosis and other bone diseases.

A Human Osteocyte Cell Line Model for Studying Staphylococcus aureus Persistence in Osteomyelitis.

Infectious osteomyelitis associated with periprosthetic joint infections is often recalcitrant to treatment and has a high rate of recurrence. In the case of Staphylococcus aureus, the most common pathogen in all forms of osteomyelitis, this may be attributed in part to residual intracellular infection of host cells, yet this is not generally considered in the treatment strategy. Osteocytes represent a unique cell type in this context due to their abundance, their formation of a syncytium throughout the bone that could facilitate bacterial spread and their relative inaccessibility to professional immune cells. As such, there is potential value in studying the host-pathogen interactions in the context of this cell type in a replicable and scalable in vitro model. Here, we examined the utility of the human osteosarcoma cell line SaOS2 differentiated to an osteocyte-like stage (SaOS2-OY) as an intracellular infection model for S. aureus. We demonstrate that S. aureus is capable of generating stable intracellular infections in SaOS2-OY cells but not in undifferentiated, osteoblast-like SaOS2 cells (SaOS2-OB). In SaOS2-OY cells, S. aureus transitioned towards a quasi-dormant small colony variant (SCV) growth phenotype over a 15-day post-infection period. The infected cells exhibited changes in the expression of key immunomodulatory mediators that are consistent with the infection response of primary osteocytes. Thus, SaOS2-OY is an appropriate cell line model that may be predictive of the interactions between S. aureus and human osteocytes, and this will be useful for studying mechanisms of persistence and for testing the efficacy of potential antimicrobial strategies.

Retraction Note: MicroRNA-23a enhances migration and invasion through PTEN in osteosarcoma.

To investigate the biological significance of abundant microRNA-23a (miR-23a) expression in osteosarcoma and its correlation with PTEN in the pathogenesis of osteosarcoma migration and invasion. The human osteosarcoma cell lines MG63, HOS58 and SaoS-2, and the human normal osteoblasts (hFOB1.19) were grown in RPMI 1640 medium supplemented with 10% fetal bovine serum. Gene and protein levels of miR-23a and PTEN were examined to determine the molecular relationship between them in the pathogenesis of osteosarcoma. Inhibition of miR-23a effectively reduced migration and invasion of osteosarcoma cell lines. Bioinformatics and luciferase-reporter assay revealed that miR-23a specifically targeted the 3'-untranslational region of PTEN and regulated its expression. Downregulation of PTEN enhanced migration and invasion of osteosarcoma cell lines. Furthermore, in tumor tissues obtained from osteosarcoma patients, the expression of miR-23a was negatively correlated with PTEN and the high expression of miR-23a combined with low expression of PTEN might serve as a risk factor for cancer patients. Besides, miR-23a-mediated suppression of PTEN led to activation of AKT/ERK pathways and epithelial-mesenchymal transition (EMT) in osteosarcoma cells, and finally enhanced the activity of osteosarcoma cell proliferation and movement and promoted osteosarcoma xenograft tumor growth in mouse models. Our study showed that miR-23a, by downregulation of PTEN, enhanced migration and invasion in osteosarcoma cells.

Integrin α2β1 as a negative regulator of the laminin receptors α6β1 and α6β4

Integrin α2β1 is a widely expressed collagen I receptor which also mediates laminin-111 binding in some cell types, but the functional relevance of collagen versus laminin binding for different cell types is poorly understood. Here we use AFM-based singe-cell force spectroscopy (SCFS) to compare α2β1-mediated adhesion strength to collagen and laminin in different cell types. Chinese Hamster Ovary (CHO) cells stably expressing integrin α2β1 (CHO-A2) displayed enhanced adhesion to collagen, but weak adhesion to laminin, consistent with a role of α2β1 as a receptor only for collagen in these cells. Inversely, the α2β1-deficient CHO wildtype cells (CHO-WT) showed weak adhesion to collagen, but strong adhesion to laminin-111, in turn suggesting that integrin α2β1 expression suppresses laminin binding. Analogous results were obtained in a pair of SAOS-2 human osteosarcoma cell lines. Again, wildtype cells (SAOS-WT) adhered strongly to laminin and poorly to collagen, while expression of integrin α2β1 (SAOS-A2) induced strong adhesion to collagen, but reduced adhesion to laminin. Expression of α2β1 also shifted cell spreading preference from laminin to collagen and suppressed laminin-dependent transmigration. In agreement with reduced laminin adhesion, α2β1 expression downregulated transcription and expression of integrin subunits α6 and β4, components of the main laminin-111 binding receptors integrin α6β1 and α6β4 in these cells. Integrin α6 and β4 expression was also reduced when α2 expression was chemically induced using tetradecanoyl-phorbol-acetate (TPA). Our results thus show that integrin α2β1 expression negatively regulates integrin α6β1 and α6β4-mediated adhesion, spreading and invasion on laminin in different cancer cell types. In contrast to SAOS-WT, but similar to SAOS-A2 osteosarcoma cells, primary Human osteoblasts (HOB) cells express α2 but only low levels of β4 integrin, preferentially adhere to and spread on collagen over laminin and show suppressed laminin-dependent transmigration. By enhancing collagen binding directly and suppressing laminin binding indirectly through laminin receptor downregulation, α2β1 expression may thus re-direct migrating cancer cells from laminin-rich to collagenous tissues and partially revert osteosarcoma cells towards an untransformed phenotype.