Lens Samples Research Articles

Dark Energy Survey Year 3 results: Cosmological constraints from galaxy clustering and galaxy-galaxy lensing using the MagLim lens sample

The cosmological information extracted from photometric surveys is most robust when multiple probes of the large scale structure of the Universe are used. Two of the most sensitive probes are the clustering of galaxies and the tangential shear of background galaxy shapes produced by those foreground galaxies, so-called galaxy-galaxy lensing. Combining the measurements of these two two-point functions leads to cosmological constraints that are independent of the way galaxies trace matter (the galaxy bias factor). The optimal choice of foreground, or lens, galaxies is governed by the joint, but conflicting requirements to obtain accurate redshift information and large statistics. We present cosmological results from the full 5000 deg2 of the Dark Energy Survey’s first three years of observations (Y3) combining those two-point functions, using for the first time a magnitude-limited lens sample (MagLim) of 11 million galaxies, especially selected to optimize such combination, and 100 million background shapes. We consider two flat cosmological models, the Standard Model with dark energy and cold dark matter (ΛCDM) a variation with a free parameter for the dark energy equation of state (wCDM). Both models are marginalized over 25 astrophysical and systematic nuisance parameters. In ΛCDM we obtain for the matter density Ωm=0.320−0.034+0.041 and for the clustering amplitude S8≡σ8(Ωm/0.3)0.5=0.778−0.031+0.037, at 68% C.L. The latter is only 1σ smaller than the prediction in this model informed by measurements of the cosmic microwave background by the Planck satellite. In wCDM we find Ωm=0.32−0.046+0.044, S8=0.777−0.051+0.049 and dark energy equation of state w=−1.031−0.379+0.218. We find that including smaller scales, while marginalizing over nonlinear galaxy bias, improves the constraining power in the Ωm−S8 plane by 31% and in the Ωm−w plane by 41% while yielding consistent cosmological parameters from those in the linear bias case. These results are combined with those from cosmic shear in a companion paper to present full DES-Y3 constraints from the three two-point functions (3×2pt).10 MoreReceived 3 June 2021Accepted 13 October 2022DOI:https://doi.org/10.1103/PhysRevD.106.103530© 2022 American Physical SocietyPhysics Subject Headings (PhySH)Research AreasCosmological parametersCosmologyDark energyDark matterGravitational lensesLarge scale structure of the UniverseSky surveysGravitation, Cosmology & Astrophysics

Estimating the warm dark matter mass from strong lensing images with truncated marginal neural ratio estimation

ABSTRACT Precision analysis of galaxy–galaxy strong gravitational lensing images provides a unique way of characterizing small-scale dark matter haloes, and could allow us to uncover the fundamental properties of dark matter’s constituents. Recently, gravitational imaging techniques made it possible to detect a few heavy subhaloes. However, gravitational lenses contain numerous subhaloes and line-of-sight haloes, whose subtle imprint is extremely difficult to detect individually. Existing methods for marginalizing over this large population of subthreshold perturbers to infer population-level parameters are typically computationally expensive, or require compressing observations into hand-crafted summary statistics, such as a power spectrum of residuals. Here, we present the first analysis pipeline to combine parametric lensing models and a recently developed neural simulation-based inference technique called truncated marginal neural ratio estimation (TMNRE) to constrain the warm dark matter halo mass function cut-off scale directly from multiple lensing images. Through a proof-of-concept application to simulated data, we show that our approach enables empirically testable inference of the dark matter cut-off mass through marginalization over a large population of realistic perturbers that would be undetectable on their own, and over lens and source parameter uncertainties. To obtain our results, we combine the signal contained in a set of images with Hubble Space Telescope resolution. Our results suggest that TMNRE can be a powerful approach to put tight constraints on the mass of warm dark matter in the multi-keV regime, which will be relevant both for existing lensing data and in the large sample of lenses that will be delivered by near-future telescopes.

Quasi-stellar objects and galaxy mass density profiles derived using the submillimetre galaxies magnification bias

Context. The magnification bias on the submillimetre galaxies (SMGs) is a gravitational lensing effect, where the SMGs are used as background lensed galaxies. This effect can be used to investigate the mass density profiles of different types of foreground lenses. Aims. In this work, we want to exploit the magnification bias of the SMGs using two different foreground samples, quasi-stellar objects (QSOs) and galaxies. Our aim is to study and compare their mass density profiles and estimate their masses and concentrations. Methods. The background SMG sample consists of objects observed by Herschel with 1.2 < z < 4.0 (mean redshift at ∼2.2). The foreground samples are QSOs with spectroscopic redshifts 0.2 < z < 1.0 (mean redshift at ∼0.7) and massive galaxies with also spectroscopic redshifts 0.2 < z < 1.0 (mean redshift at ∼0.3). The cross-correlation measurements are estimated with the Davis-Peebles estimator by stacking the SMG–QSO and SMG–galaxy pairs for the two analysed cases, respectively. The advantage of such an approach is that it allows us to study the mass density profile over a wide range of angular scales, from ∼2 to ∼250 arcsec, including the inner part of the dark-matter halo (≲100 kpc). Moreover, the analysis is carried out by combining two of the most common theoretical mass density profiles in order to fit the cross-correlation measurements. Results. The measurements are correctly fitted after splitting the available angular scales into an inner and an outer part using two independent mass density profiles, one for each region. In particular, for the QSOs, we obtain masses of log10(M/M⊙) = 13.51 ± 0.04 and of log10(M/M⊙) = 13.44 ± 0.17 for the inner and outer parts, respectively. The estimated masses for the galaxy sample are log10(M/M⊙) = 13.32 ± 0.08 and log10(M/M⊙) = 12.78 ± 0.21 for the inner and outer parts, respectively. The concentrations for the inner part are much higher than those for the outer region for both samples: C = 6.85 ± 0.34 (inner) and C = 0.36 ± 0.18 (outer) for the QSOs and C = 8.23 ± 0.77 (inner) and C = 1.21 ± 1.01 (outer) for the galaxies. Conclusions. In both samples, the inner part has an excess in the mass density profile with respect to the outer part for both QSOs and galaxy samples. We obtain similar values for the central mass with both samples, and they are also in agreement with those of galaxy clusters results. However, the estimated masses for the outer region and the concentrations of the inner region both vary with lens sample. We believe this to be related to the probability of galactic interactions and/or the different evolutionary stages.

Hubble Asteroid Hunter

Context. The Hubble Space Telescope (HST) archives constitute a rich dataset of high-resolution images to mine for strong gravitational lenses. While many HST programmes specifically target strong lenses, they can also be present by coincidence in other HST observations. Aims. Our aim is to identify non-targeted strong gravitational lenses, without any prior selection on the lens properties, in almost two decades of images from the ESA HST archive (eHST). Methods. We used crowdsourcing on the Hubble Asteroid Hunter (HAH) citizen science project to identify strong lenses, along with asteroid trails, in publicly available large field-of-view HST images. We visually inspected 2354 objects tagged by citizen scientists as strong lenses to clean the sample and identify the genuine lenses. Results. We report the detection of 252 strong gravitational lens candidates, which were not the primary targets of the HST observations. A total of 198 of them are new, not previously reported by other studies, consisting of 45 A grades, 74 B grades and 79 C grades. The majority are galaxy-galaxy configurations. The newly detected lenses are, on average, 1.3 magnitudes fainter than previous HST searches. This sample of strong lenses with high-resolution HST imaging is ideal to follow up with spectroscopy for lens modelling and scientific analyses. Conclusions. This paper presents the unbiased search of lenses that enabled us to find a wide variety of lens configurations, including exotic lenses. We demonstrate the power of crowdsourcing in visually identifying strong lenses and the benefits of exploring large archival datasets. This study shows the potential of using crowdsourcing in combination with artificial intelligence for the detection and validation of strong lenses in future large-scale surveys such as ESA’s Euclid mission or in James Webb Space Telescope (JWST) archival images.

STRIDES: automated uniform models for 30 quadruply imaged quasars

ABSTRACT Gravitational time delays provide a powerful one-step measurement of H0, independent of all other probes. One key ingredient in time-delay cosmography are high-accuracy lens models. Those are currently expensive to obtain, both, in terms of computing and investigator time (105–106 CPU hours and ∼0.5–1 yr, respectively). Major improvements in modelling speed are therefore necessary to exploit the large number of lenses that are forecast to be discovered over the current decade. In order to bypass this roadblock, we develop an automated modelling pipeline and apply it to a sample of 31 lens systems, observed by the Hubble Space Telescope in multiple bands. Our automated pipeline can derive models for 30/31 lenses with few hours of human time and <100 CPU hours of computing time for a typical system. For each lens, we provide measurements of key parameters and predictions of magnification as well as time delays for the multiple images. We characterize the cosmography-readiness of our models using the stability of differences in the Fermat potential (proportional to time delay) with respect to modelling choices. We find that for 10/30 lenses, our models are cosmography or nearly cosmography grade (<3 per cent and 3–5 per cent variations). For 6/30 lenses, the models are close to cosmography grade (5–10 per cent). These results utilize informative priors and will need to be confirmed by further analysis. However, they are also likely to improve by extending the pipeline modelling sequence and options. In conclusion, we show that uniform cosmography grade modelling of large strong lens samples is within reach.

Cosmological inference from an emulator based halo model. II. Joint analysis of galaxy-galaxy weak lensing and galaxy clustering from HSC-Y1 and SDSS

We present high-fidelity cosmology results from a blinded joint analysis of galaxy-galaxy weak lensing (ΔΣ) and projected galaxy clustering (wp) measured from the Hyper Suprime-Cam Year-1 (HSC-Y1) data and spectroscopic Sloan Digital Sky Survey (SDSS) galaxy catalogs in the redshift range 0.15<z<0.7. We define luminosity-limited samples of SDSS galaxies to serve as the tracers of wp in three spectroscopic redshift bins, and as the lens samples for ΔΣ. For the ΔΣ measurements, we select a single sample of 4×106 source galaxies over 140 deg2 from HSC-Y1 with photometric redshifts (photo z) greater than 0.75, enabling a better handle of photo-z errors by comparing the ΔΣ amplitudes for the three lens redshift bins. The deep, high-quality HSC-Y1 data enable significant detections of the ΔΣ signals, with integrated signal-to-noise ratio S/N∼15 in the range 3≤R/[h−1 Mpc]≤30 for the three lens samples, despite the small area coverage. For cosmological parameter inference, we use an input galaxy-halo connection model built on the dark emulator package (which uses an ensemble set of high-resolution N-body simulations and enables fast, accurate computation of the clustering observables) with a halo occupation distribution that includes nuisance parameters to marginalize over modeling uncertainties. We model the ΔΣ and wp measurements on scales from R≃3 and 2 h−1 Mpc, respectively, up to 30 h−1 Mpc (therefore excluding the baryon acoustic oscillations information) assuming a flat ΛCDM cosmology, marginalizing over about 20 nuisance parameters and demonstrating the robustness of our results to them. With various tests using mock catalogs described in Miyatake et al. [preceding paper, Phys. Rev. D 106, 083519 (2022)], we show that any bias in the clustering amplitude S8≡σ8(Ωm/0.3)0.5 due to uncertainties in the galaxy-halo connection is less than ∼50% of the statistical uncertainty of S8, unless the assembly biaseffect is unexpectedly large. Our best-fit models have S8=0.795−0.042+0.049 (mode and 68% credible interval) for the flat ΛCDM model; we find tighter constraints on the quantity S8(α=0.17)≡σ8(Ωm/0.3)0.17=0.745−0.031+0.039.23 MoreReceived 29 November 2021Accepted 22 August 2022DOI:https://doi.org/10.1103/PhysRevD.106.083520© 2022 American Physical SocietyPhysics Subject Headings (PhySH)Research AreasCosmologyDark energyGravitational lensesGravitation, Cosmology & Astrophysics

Cosmological inference from an emulator based halo model. I. Validation tests with HSC and SDSS mock catalogs

We present validation tests of emulator-based halo model method for cosmological parameter inference, assuming hypothetical measurements of the projected correlation function of galaxies, $w_{\rm p}(R)$, and the galaxy-galaxy weak lensing, $\Delta\!\Sigma(R)$, from the spectroscopic SDSS galaxies and the Hyper Suprime-Cam Year1 (HSC-Y1) galaxies. To do this, we use \textsc{Dark Emulator} developed in Nishimichi et al. based on an ensemble of $N$-body simulations, which is an emulation package enabling a fast, accurate computation of halo clustering quantities for flat-geometry $w$CDM cosmologies. Adopting the halo occupation distribution, the emulator allows us to obtain model predictions of $\Delta\!\Sigma$ and $w_{\rm p}$ for the SDSS-like galaxies at a few CPU seconds for an input set of parameters. We present performance and validation of the method by carrying out Markov Chain Monte Carlo analyses of the mock signals measured from a variety of mock catalogs that mimic the SDSS and HSC-Y1 galaxies. We show that the halo model method can recover the underlying true cosmological parameters to within the 68\% credible interval, except for the mocks including the assembly bias effect (although we consider the unrealistically-large amplitude of assembly bias effect). Even for the assembly bias mock, we demonstrate that the cosmological parameters can be recovered {\it if} the analysis is restricted to scales $R\gtrsim 10~h^{-1}{\rm Mpc}$. We also show that, by using a single population of source galaxies to infer the relative strengths of $\Delta\!\Sigma$ for multiple lens samples at different redshifts, the joint probes method allows for self-calibration of photometric redshift errors and multiplicative shear bias. Thus we conclude that the emulator-based halo model method can be safely applied to the HSC-Y1 dataset, achieving a precision of $\sigma(S_8)\simeq 0.04$.

Consistent lensing and clustering in a low-S8 Universe with BOSS, DES Year 3, HSC Year 1, and KiDS-1000

ABSTRACT We evaluate the consistency between lensing and clustering based on measurements from Baryon Oscillation Spectroscopic Survey combined with galaxy–galaxy lensing from Dark Energy Survey (DES) Year 3, Hyper Suprime-Cam Subaru Strategic Program (HSC) Year 1, and Kilo-Degree Survey (KiDS)-1000. We find good agreement between these lensing data sets. We model the observations using the Dark Emulator and fit the data at two fixed cosmologies: Planck (S8 = 0.83), and a Lensing cosmology (S8 = 0.76). For a joint analysis limited to large scales, we find that both cosmologies provide an acceptable fit to the data. Full utilization of the higher signal-to-noise small-scale measurements is hindered by uncertainty in the impact of baryon feedback and assembly bias, which we account for with a reasoned theoretical error budget. We incorporate a systematic inconsistency parameter for each redshift bin, A, that decouples the lensing and clustering. With a wide range of scales, we find different results for the consistency between the two cosmologies. Limiting the analysis to the bins for which the impact of the lens sample selection is expected to be minimal, for the Lensing cosmology, the measurements are consistent with A = 1; A = 0.91 ± 0.04 (A = 0.97 ± 0.06) using DES+KiDS (HSC). For the Planck case, we find a discrepancy: A = 0.79 ± 0.03 (A = 0.84 ± 0.05) using DES+KiDS (HSC). We demonstrate that a kinematic Sunyaev–Zeldovich-based estimate for baryonic effects alleviates some of the discrepancy in the Planck cosmology. This analysis demonstrates the statistical power of small-scale measurements; however, caution is still warranted given modelling uncertainties and foreground sample selection effects.

In situ detection of multitarget impurities on contact lens by electrochemical scanning probe

Identifying multitarget impurities on contact lenses is challenging because traditional methods such as polymerase chain reaction cannot be used on the unknown target. Other sampling methods often require expensive antibodies or dyes. Therefore, this research focuses on the detection of multitarget impurities in situ on the lens surface as a more innovative and effective label-free assay using scanning electrochemical microscopy (SECM). Impurities were investigated using an electrochemical assay and an oxygen consumption assay. The electrochemical activity of BSA and the bacteria adhered to the contact lenses was explored using a FcMeOH solution. The experimental results revealed the difference in current values of the clean and protein-adsorbed contact lens samples. Furthermore, SECM can be used to detect the oxygen consumption of aerobic microbes using the oxygen reduction method. Thus, contaminated microbes can be identified without labeling in phosphate buffer saline. The mass spectra of the contact lenses were studied and the adsorption of impurities was verified. Finally, contact lens samples were investigated from various patients with ocular infection diagnosed with corneal ulcers, preseptal cellulitis, and orbital cellulitis. As a result, SECM could be a new tool for distinguishing the cleanliness of contact lenses in the future.

54.3: Invited Paper: Surface Control of LC Alignment for Creation of Liquid Crystal Lenses Arrays

New photosensitive alignment materials, capable to obtain pretilt angle from 90 to 0 degree in single technological process of UV exposure, are developed. The novel technological method for fabrication LC lens and LC lenses arrays has been developed based on new pretilt angle gradient alignment materials. Laboratory samples of voltage tunable LC lens and LC lenses arrays are obtained and characterized. The developed low cost fabrication technology of tunable micro‐lenses arrays based on photosensitive alignment materials has low complexity and is perspective for light field technology applications.

Constraining SIDM with halo shapes: Revisited predictions from realistic simulations of early-type galaxies

ABSTRACT We study the effect of self-interacting dark matter (SIDM) and baryons on the shape of early-type galaxies (ETGs) and their dark matter haloes, comparing them to the predictions of the cold dark matter (CDM) scenario. We use five hydrodynamical zoom-in simulations of haloes hosting ETGs ($M_{\rm vir}\sim 10^{13}\, \mathrm{M}_{\odot }$ and $M_{*}\sim 10^{11}\, \mathrm{M}_{\odot }$), simulated in CDM and a SIDM model with constant cross-section of σT/mχ = 1 cm2g−1. We measure the 3D and projected shapes of the dark matter haloes and their baryonic content using the inertia tensor and compare our measurements to the results of three HST samples of gravitational lenses and Chandra and XMM–Newton X-ray observations. We find that the inclusion of baryons greatly reduces the differences between CDM and a SIDM, together with the ability to draw constraints based on shapes. Lensing measurements reject the predictions of CDM dark-matter-only simulations and prefer one of the hydro scenarios. When we consider the total sample of lenses, observational data prefer the CDM hydro scenario. The shapes of the X-ray emitting gas are compatible with observational results in both hydro runs, with CDM predicting higher elongations only in the very centre. Contrary to previous claims at the scale of elliptical galaxies, we conclude that both CDM and our SIDM model can still explain observed shapes once we include baryons in the simulations. Our results demonstrate that this is essential to derive realistic constraints and that new simulations are needed to confirm and extend our findings.

Single Nucleotide Polymorphism of the chickpea gene encoding acetohydroxyacid synthase: molecular-genetical analysis

Aim. Chickpea AHAS gene molecular-marker analysis. To achieve this aim following tasks were set: chickpea AHAS gene SNP markers research and development, chickpea varieties and samples genotyping by the markers. Methods. CTAB method of DNA isolation and purification, real-time polymerase chain reaction. Results. Chickpea AHAS1 gene KASP gene specificity was found: there were no DNA amplification with lens and maize samples observed. Three Ukrainian chickpea varieties and 28 ICRISAT collection samples KASP genotyping detected only wild-type C-allele. Authors own SNP markers 58 chickpea samples genotyping showed that AHAS1 gene within samples was homozygous, no mutant T allele was detected. Conclusions. 31 chickpea samples contained wild-type C-allele by KASP genotyping, which is associated with imidazoline herbicide susceptibility. 58 chickpea samples contained C-allele by authors own SNP markers genotyping. Mutant T-allele that is associated with tolerance absence indicates researched samples imidazole herbicide tolerance low level.

Halo Properties and Mass Functions of Groups/Clusters from the DESI Legacy Imaging Surveys DR9

Based on a large group/cluster catalog recently constructed from the DESI Legacy Imaging Surveys DR9 using an extended halo-based group finder, we measure and model the group–galaxy weak-lensing signals for groups/clusters in a few redshift bins within redshift range 0.1 ≤ z < 0.6. Here, the background shear signals are obtained based on the DECaLS survey shape catalog, derived with the Fourier_Quad method. We divide the lens samples into five equispaced redshift bins and seven mass bins, which allow us to probe the redshift and mass dependence of the lensing signals, and hence the resulting halo properties. In addition to these sample selections, we also check the signals around different group centers, e.g., the brightest central galaxy, the luminosity-weighted center, and the number-weighted center. We use a lensing model that includes off-centering to describe the lensing signals that we measure for all mass and redshift bins. The results demonstrate that our model predictions for the halo masses, biases, and concentrations are stable and self-consistent among different samples for different group centers. Taking advantage of the very large and complete sample of groups/clusters, as well as the reliable estimations of their halo masses, we provide measurements of the cumulative halo mass functions up to redshift z = 0.6, with a mass precision at 0.03 ∼ 0.09 dex.

A machine learning based approach to gravitational lens identification with the International LOFAR Telescope

ABSTRACT We present a novel machine learning based approach for detecting galaxy-scale gravitational lenses from interferometric data, specifically those taken with the International LOFAR Telescope (ILT), which is observing the northern radio sky at a frequency of 150 MHz, an angular resolution of 350 mas and a sensitivity of 90 μJy beam−1 (1σ). We develop and test several Convolutional Neural Networks to determine the probability and uncertainty of a given sample being classified as a lensed or non-lensed event. By training and testing on a simulated interferometric imaging data set that includes realistic lensed and non-lensed radio sources, we find that it is possible to recover 95.3 per cent of the lensed samples (true positive rate), with a contamination of just 0.008 per cent from non-lensed samples (false positive rate). Taking the expected lensing probability into account results in a predicted sample purity for lensed events of 92.2 per cent. We find that the network structure is most robust when the maximum image separation between the lensed images is ≥3 times the synthesized beam size, and the lensed images have a total flux density that is equivalent to at least a 20σ (point-source) detection. For the ILT, this corresponds to a lens sample with Einstein radii ≥0.5 arcsec and a radio source population with 150 MHz flux densities ≥2 mJy. By applying these criteria and our lens detection algorithm we expect to discover the vast majority of galaxy-scale gravitational lens systems contained within the LOFAR Two Metre Sky Survey.

Spiroplasma-induced Uveitis Mimicking Congenital Glaucoma in a Newborn

A 19-day-old boy was referred for unilateral buphthalmos (Fig A) with intraocular pressure (IOP) measured at 28 mmHg with rebound tonometer. Examination under anesthesia showed keratic precipitates, iris granulomata, and pupillary seclusion (Fig B). Oral josamycin, topical steroids, and β-blockers allowed for the normalization of IOP within a day, and for the resolution of inflammation within 2 weeks. Microbial culture of a lens sample taken during cataract surgery, which was performed 4 weeks after first examination (Fig C) revealed some colonies of Spiroplasma ixodetis on agar medium (A7) (Fig D, magnification ×40).

HSC Year 1 cosmology results with the minimal bias method: HSC×BOSS galaxy-galaxy weak lensing and BOSS galaxy clustering

We present cosmological parameter constraints from a blinded joint analysis of galaxy-galaxy weak lensing, $\Delta\!\Sigma(R)$, and projected correlation function, $w_\mathrm{p}(R)$, measured from the first-year HSC (HSC-Y1) data and SDSS spectroscopic galaxies over $0.15<z<0.7$. We use luminosity-limited samples as lens samples for $\Delta\!\Sigma$ and as large-scale structure tracers for $w_\mathrm{p}$ in three redshift bins, and use the HSC-Y1 galaxy catalog to define a secure sample of source galaxies at $z_\mathrm{ph}>0.75$ for the $\Delta\!\Sigma$ measurements, selected based on their photometric redshifts. For theoretical template, we use the "minimal bias" model for the cosmological clustering observables for the flat $\Lambda$CDM cosmological model. We compare the model predictions with the measurements in each redshift bin on large scales, $R>12$ and $8~h^{-1}\mathrm{Mpc}$ for $\Delta\!\Sigma(R)$ and $w_\mathrm{p}(R)$, respectively, where the perturbation theory-inspired model is valid. When we employ weak priors on cosmological parameters, without CMB information, we find $S_8=0.936^{+0.092}_{-0.086}$, $\sigma_8=0.85^{+0.16}_{-0.11}$, and $\Omega_\mathrm{m}=0.283^{+0.12}_{-0.035}$ for the flat $\Lambda$CDM model. Although the central value of $S_8$ appears to be larger than those inferred from other cosmological experiments, we find that the difference is consistent with expected differences due to sample variance, and our results are consistent with the other results to within the statistical uncertainties. (abriged)

Dark Energy Survey Year 3 results: Cosmology from combined galaxy clustering and lensing validation on cosmological simulations

We present a validation of the Dark Energy Survey Year 3 (DES Y3) $3\times2$-point analysis choices by testing them on Buzzard v2.0, a new suite of cosmological simulations that is tailored for the testing and validation of combined galaxy clustering and weak lensing analyses. We show that the Buzzard v2.0 simulations accurately reproduce many important aspects of the DES Y3 data, including photometric redshift and magnitude distributions, and the relevant set of two-point clustering and weak lensing statistics. We then show that our model for the $3\times2$-point data vector is accurate enough to recover the true cosmology in simulated surveys assuming the true redshift distributions for our source and lens samples, demonstrating robustness to uncertainties in the modeling of the non-linear matter power spectrum, non-linear galaxy bias and higher-order lensing corrections. Additionally, we demonstrate for the first time that our photometric redshift calibration methodology, including information from photometry, spectroscopy, clustering cross-correlations, and galaxy-galaxy lensing ratios, is accurate enough to recover the true cosmology in simulated surveys in the presence of realistic photometric redshift uncertainties.

Dark Energy Survey Year 3 results: calibration of lens sample redshift distributions using clustering redshifts with BOSS/eBOSS

ABSTRACT We present clustering redshift measurements for Dark Energy Survey (DES) lens sample galaxies used in weak gravitational lensing and galaxy clustering studies. To perform these measurements, we cross-correlate with spectroscopic galaxies from the Baryon Acoustic Oscillation Survey (BOSS) and its extension, eBOSS. We validate our methodology in simulations, including a new technique to calibrate systematic errors that result from the galaxy clustering bias, and we find that our method is generally unbiased in calibrating the mean redshift. We apply our method to the data, and estimate the redshift distribution for 11 different photometrically selected bins. We find general agreement between clustering redshift and photometric redshift estimates, with differences on the inferred mean redshift found to be below |Δz| = 0.01 in most of the bins. We also test a method to calibrate a width parameter for redshift distributions, which we found necessary to use for some of our samples. Our typical uncertainties on the mean redshift ranged from 0.003 to 0.008, while our uncertainties on the width ranged from 4 to 9 per cent. We discuss how these results calibrate the photometric redshift distributions used in companion papers for DES Year 3 results.

Transitioning from Stage-III to Stage-IV: cosmology from galaxy×CMB lensing and shear×CMB lensing

ABSTRACT We examine the cosmological constraining power from two cross-correlation probes between galaxy and cosmic microwave background (CMB) surveys: the cross-correlation of lens galaxy density with CMB lensing convergence 〈δgκCMB〉, and source galaxy weak lensing shear with CMB lensing convergence 〈γκCMB〉. These two cross-correlation probes provide an independent cross-check of other large-scale structure constraints and are insensitive to galaxy-only or CMB-only systematic effects. In addition, when combined with other large-scale structure probes, the cross-correlations can break degeneracies in cosmological and nuisance parameters, improving both the precision and robustness of the analysis. In this work, we study how the constraining power of 〈δgκCMB〉 + 〈γκCMB〉 changes from Stage-III (ongoing) to Stage-IV (future) surveys. Given the flexibility in selecting the lens galaxy sample, we also explore systematically the impact on cosmological constraints when we vary the redshift range and magnitude limit of the lens galaxies using mock galaxy catalogs. We find that in our setup, the contribution to cosmological constraints from 〈δgκCMB〉 and 〈γκCMB〉 are comparable in the Stage-III data sets; but in Stage-IV surveys, the noise in 〈δgκCMB〉 becomes subdominant to cosmic variance, preventing 〈δgκCMB〉 to further improve the constraints. This implies that to maximize the cosmological constraints from future 〈δgκCMB〉 + 〈γκCMB〉 analyses, we should focus more on the requirements on 〈γκCMB〉 instead of 〈δgκCMB〉. Furthermore, the selection of the lens sample should be optimized in terms of our ability to characterize its redshift or galaxy bias instead of its number density.

Dark energy survey year 3 results: High-precision measurement and modeling of galaxy-galaxy lensing

We present and characterize the galaxy-galaxy lensing signal measured using the first three years of data from the Dark Energy Survey (DES Y3) covering 4132 deg2. These galaxy-galaxy measurements are used in the DES Y3 3×2 pt cosmological analysis, which combines weak lensing and galaxy clustering information. We use two lens samples: a magnitude-limited sample and the redmagic sample, which span the redshift range ∼0.2–1 with 10.7 and 2.6 M galaxies, respectively. For the source catalog, we use the metacalibration shape sample, consisting of ≃100 M galaxies separated into four tomographic bins. Our galaxy-galaxy lensing estimator is the mean tangential shear, for which we obtain a total SNR of ∼148 for maglim (∼120 for redmagic), and ∼67 (∼55) after applying the scale cuts of 6 Mpc/h. Thus we reach percent-level statistical precision, which requires that our modeling and systematic-error control be of comparable accuracy. The tangential shear model used in the 3×2 pt cosmological analysis includes lens magnification, a five-parameter intrinsic alignment model, marginalization over a point mass to remove information from small scales and a linear galaxy bias model validated with higher-order terms. We explore the impact of these choices on the tangential shear observable and study the significance of effects not included in our model, such as reduced shear, source magnification, and source clustering. We also test the robustness of our measurements to various observational and systematics effects, such as the impact of observing conditions, lens-source clustering, random-point subtraction, scale-dependent metacalibration responses, point spread function residuals, and B modes.11 MoreReceived 3 June 2021Accepted 9 March 2022DOI:https://doi.org/10.1103/PhysRevD.105.083528© 2022 American Physical SocietyPhysics Subject Headings (PhySH)Research AreasCosmological parametersDark energyDark matterGravitational lensesLarge scale structure of the UniverseOptical, UV, & IR astronomyGravitation, Cosmology & Astrophysics