Safe Energy Research Articles

Non-sacrificial additive regulated electrode–electrolyte interface enables long-life, deeply rechargeable aqueous Zn anodes

Rechargeable aqueous Zn batteries (RAZBs) offer a promising solution for safe and cost-effective energy storage. However, practical applications of this type of battery are hindered by dendrite formation and side reactions, which primarily stem from the unstable Zn electrode–electrolyte interface (EEI). Here, we report 3-(1-pyridinio)-1-propanesulfonate (PPS) as a novel EEI regulator to tackle these critical issues. Theoretical calculations and experimental results reveal that PPS molecules can be preferentially adsorbed on the Zn anode surface and construct a lean-water EEI, which regulates uniform Zn plating/stripping and minimizes interfacial side reactions. As a result, the addition of PPS enables a Zn//Cu asymmetric cell to achieve an ultra-high Coulombic efficiency of 99.88 % and a lifespan of over 4,000 cycles (around half a year), far exceeding that with a conventional electrolyte (99.65 % and 210 cycles). Remarkably, even at 20 mA cm−2 and a high depth of discharge of 70 %, the Zn//Zn battery using the new electrolyte can still maintain an impressive cycling life of over 250 h. More importantly, the implementation of the designed electrolyte in various Zn-based full cells yields exceptional capacity retention and lifespan. This work underscores the importance of EEI regulation in advancing RAZB technology and offers a simple yet effective strategy for enhancing the stability and reversibility of Zn anodes, which represents a key step toward realizing the full potential of RAZBs for next-generation energy storage.

Highly conductive composite cathode prepared by dry process using Nafion-Li ionomer for sulfide-based all-solid-state lithium batteries

All-solid-state lithium batteries (ASSLBs) offer safe operation and high energy density, making them potential alternatives to liquid-electrolyte-based lithium-ion batteries. Sheet-type composite cathodes for sulfide-based ASSLBs are typically fabricated using a nonconducting polytetrafluoroethylene (PTFE) binder by a solvent-free dry process, resulting in poor cycling stability and low rate capability. We demonstrate a strategy for using a Li+-incorporated Nafion (Nafion-Li) binder to fabricate a composite cathode via a dry process for improving cycling performance of ASSLBs. The solid-state cell assembled with Li6PS5Cl and LiNi0.7Co0.15Mn0.15O2 cathode using an optimal amount of Nafion-Li delivers a discharge capacity of 177.8 mAh g−1 (4.1 mAh cm−2) at 25 °C and exhibits a high capacity retention of 97% after 200 cycles at 0.5C. The improved cycling performance results from enhanced electrical conductivity (ionic and electron conductivity) and better interfacial contacts between cathode active material, solid electrolyte, and conducting carbon in the composite cathode, provided by Nafion-Li binder.

Solar photovoltaic energy development and biodiversity conservation: Current knowledge and research gaps

AbstractSolar photovoltaic (PV) has become the second renewable energy source, giving rise to potential conflicts with biodiversity conservation. However, the information available about the impacts and mitigation measures of solar PV energy is scarce and scattered, and a rigorous and comprehensive review on the topic is lacking. Here, we review the state of knowledge on its impacts and mitigation measures and identify main knowledge gaps. For that, we reviewed more than 2000 articles, out of which only 180 assessed the impacts of solar PV (N = 138) and/or propose mitigation measures (65). Even though Asia and Europe head the list of regions with the highest PV installed capacity (59% and 22%, respectively), a large portion of the existing knowledge is drawn from North American environmental contexts (48% of the studies), specifically from deserts (41%). Impacts were addressed on plants (26%), arthropods (14%), birds (10%), microorganisms (10%), reptiles (7%), mammals (4%), and bats (1%), but also on abiotic factors (e.g., humidity and temperature; 20%) and ecosystem services (3%). Most studies addressed the impact of PV on habitat alteration at landscape (33%) and microhabitat scale (20%), and on microclimate at microhabitat scale (17%), but other topics have been scarcely addressed (e.g., impact on microclimate at landscape scale or the potential of agrivoltaic systems). Lastly, 53% of the studies employed a single PV facility, and preconstruction situations were rarely reported (8%). There is a strong environmental context bias in the current understanding of PV impacts, which might not be extrapolable to other environmental situations like farmlands, where most of the solar PV capacity is being installed. Moreover, standardized and robust sampling designs are lacking to address cumulative, long‐term, and long‐scale impacts and produce comparable findings across contexts. Given the lack of empirical evidence and the irrepressible development of PV energy, it is advisable to apply an iterative monitoring and adaptive process to guarantee a safe energy transition. This review may provide useful guidance on prioritizing research efforts for a smooth shift to renewable energy.

Deeply Discharged, Quiescently Stable, and Long-Life Zn Anode by Spontaneous SEI Formation.

Zn ion batteries (ZIBs) are a promising candidate in safe and low-cost large-scale energy storage applications. However, significantly deteriorated cycling stability of Zn anode in high depth of charge or after long-term quiescence impedes the practical application of ZIBs. Aiming at the above issue, a spontaneous solid electrolyte interphase (SEI) formation of Zn4(OH)6SO4·xH2O (ZHS) on Zn powder is achieved in pure ZnSO4 electrolyte by facile and rational interface design. The stable and ultrathin ZHS SEI plays a crucial part in insulating water molecules and conducting Zn2+ ions, intrinsically suppressing the severe hydrogen evolution and dendrite formation on the Zn powder anode. The ZHS-Zn anode delivers a stable cycling at a high DOD of 50% for over 500h, as well as a lifespan of over 200h after 40-days of resting at a DOD of 25%. Benefiting from the high utilization of Zn anode, the energy density of the Zn-MnxV2O5 full cell is up to 118WhKg-1. This facile method can fabricate the ZHS-Zn anode as long as 1m, revealing its feasibility in large-scale production and commercialization.

Pulsed field ablation of atrial fibrillation using a large area focal catheter with a novel contact detection algorithm. A first-in-human experience using the QuickShot catheter

Abstract Background/Introduction Pulsed field ablation (PFA) is emerging as a safe and effective alternative energy modality for cardiac ablation. Data have shown that while tissue contact is critical for PFA, the amount of contact force is less important. Single-shot catheters have shown comparable results to current thermal methods for pulmonary vein isolation (PVI), however, are limited to anatomical-based ablation strategies and have limited ability to detect tissue contact. The investigational QuickShot™ large-area focal catheter (Galvanize Therapeutics, Redwood City, CA) combines high-density mapping with large-area focal ablation guided by contact detection. Purpose The QuickShot PEF-AF study was a prospective, single-arm, first-in-human study performed at a single European center to evaluate the safety and performance of the QuickShot catheter (see Figure 1, panel A) combined with the CE-marked CENTAURI™ System (Galvanize Therapeutics, Figure 1, panel B) for catheter ablation of atrial fibrillation (AF). Methods Subjects with paroxysmal or persistent AF underwent a PVI procedure under deep sedation (fentanyl, midazolam, propofol) guided by Rhythmia™ HDx (Boston Scientific, Marlborough, MA, Figure 1, panel D). Irrigation was set to a constant 6 mL/min during the procedure. Focal, monopolar, biphasic PFA lesions were delivered asynchronously at 33 Amps and a 10 mm inter-lesion spacing (center to center with 10 mm lesion tag size). Catheter-tissue contact was confirmed by ICE/fluoroscopy and a novel impedance-based contact detection system (Figure 1, panel C). The acute performance endpoint was PVI, assessed by entrance and exit block using high-density mapping. Procedural safety assessments included microbubble detection via ICE, induction of VT/VF, muscle stimulation, phrenic nerve function, and NIHSS post-procedure. Results Twenty (20) subjects (60% PAF, 60 ± 12 years, 75% male, 4.3 ± 0.52 cm LA AP diameter) were enrolled and treated. Acute PVI was achieved in 100% of patients and targeted PVs (82/82), with first-pass isolation in 88% of targeted PVs. The PVI time was 31 ± 10 min with 46.7 ± 11.4 PFA applications. There were no device- or procedure-related adverse events, and no documented incidence of microbubble formation, arrhythmia induction, muscle stimulation, phrenic nerve dysfunction, esophageal injury, or change in NIHSS post-procedure. Conclusion The QuickShot catheter enables safe and effective large-area focal PFA for subjects requiring PVI. The catheter design enables efficient and flexible focal lesion placement with the ability to ensure adequate apposition to targeted tissues using its novel contact detection algorithm. Future studies will investigate the use of this novel catheter for PFA strategies beyond PVI.

Nuclear fusion as unlimited power source for ships

Every now and then, every marine engineer dreams of a compact, lightweight and inexhaustible energy source to power large ships across the seven seas. Nuclear fusion of deuterium and tritium promises to be a safe, compact, carbon-free, and inexhaustible energy source. Even though it will take decades before conventional power plants may be replaced with nuclear fusion, the concept of nuclear fusion for marine propulsion has already been put on the table by commercial parties. This research investigates the potential of nuclear fusion onboard ships. The design investigates putting the smallest imaginable magnetic confinement reactor, ARC, on a ship. The only commercial ship requiring significant amounts of power is the Queen Mary 2. The large power output of ARC (200 MWe) is one of the major issues of putting a fusion reactor on a ship. Other issues may include intact stability, structural design and influences of vibrations on the fusion reactor. All in all, we found that a fusion reactor onboard a ship is unlikely to be feasible in the near future.

Toward Safe and Reliable Aqueous Ammonium Ion Energy Storage Systems

AbstractAqueous batteries using non‐metallic charge carriers like proton (H+) and ammonium (NH4+) ions are becoming more popular compared to traditional metal‐ion batteries, owing to their enhanced safety, high performance, and sustainability (they are ecofriendly and derived from abundant resources). Ammonium ion energy storage systems (AIBs), which use NH4+ ions with tetrahedral geometry, a small hydrated ionic radius, and relatively low ionic weight, are emerging as strong candidates in non‐metal ion battery chemistry. Various electrode materials (both inorganic and organic) are investigated as hosts for NH4+ ions, however, a comprehensive understanding of these mechanisms is still lacking. This gap limits the ability to optimize performance and identify further research opportunities in AIBs. In this review, the charge storage mechanisms in AIBs are discussed, offering insights into the interactions between NH4+ ions and different electrode materials. Additionally, existing literature on electrode materials, highlighting key structural, and electrochemical achievements are summarized. The review also outlines various electrolytes and examines how their properties influence AIB performance. Finally, the shortcomings of current research are discussed and potential solutions are suggested to advance AIB technology, with the goal of inspiring researchers to explore real‐world applications for ammonium ion batteries.

Accelerating the Development of LLZO in Solid-State Batteries Toward Commercialization: A Comprehensive Review.

Solid-state batteries (SSBs) are under development as high-priority technologies for safe and energy-dense next-generation electrochemical energy storage systems operating over a wide temperature range. Solid-state electrolytes (SSEs) exhibit high thermal stability and, in some cases, the ability to prevent dendrite growth through a physical barrier, and compatibility with the "holy grail" metallic lithium. These unique advantages of SSEs have spurred significant research interests during the last decade. Garnet-type SSEs, that is, Li7La3Zr2O12 (LLZO), are intensively investigated due to their high Li-ion conductivity and exceptional chemical and electrochemical stability against lithium metal anodes. However, poor interfacial contact with cathode materials, undesirable lithium plating along grain boundaries, and moisture-induced chemical degradation greatly hinder the practical implementation of LLZO-based SSEs for SSBs. In this review, the recent advances in synthesis methods, modification strategies, corresponding mechanisms, and applications of garnet-based SSEs in SSBs are critically summarized. Furthermore, a comprehensive evaluation of the challenges and development trends of LLZO-based electrolytes in practical applications is presented to accelerate their development for high-performance SSBs.

Financial dynamics, green transition and hydrogen economy in Europe

The introduction of the Next Generation funding scheme provides an opportunity for the EU-25 to make significant financial progress towards a radical and fully sustainable Green economy. This study examines the financial implications of a complete transition to hydrogen energy. In this paper, we propose the Hydrogen Production Safe Supply and Storage energy model by analyzing the conversion of electricity from offshore wind farms to hydrogen, which serves as both an energy storage and fuel for a variety of sectors, including transportation, households, industries, and governments. We analyze the financial impact of the Green transition across the EU-25 economies, based on a panel auto-regressive distributed lag model and the simulation procedure proposed by Jordan and Philips (2018). In addition to electricity production and consumption, the variables used include greenhouse gas emissions, real output per capita, and total environmental tax revenue. According to the study's financial insights, increased renewable electricity production results in a significant reduction in household energy consumption, as well as an increase in consumption in the transportation, industrial, and public sectors. These findings underscore the economic implications of transitioning to renewable energy and highlight the financial imperatives, such as targeted state aid, the immediate expansion of the hydrogen supply network, further research on safe mobile hydrogen containment, and an extensive upgrade of the regional hydrogen supply network within the EU-25.

Synthesis and Catalytic Performance of Mo2C/MoS2 Composite Heterojunction Catalysts.

Hydrogen, as a clean, safe, and efficient energy carrier, is one of the hot energy sources that have attracted much attention. Mo2C, due to the introduction of C atoms, makes the atomic spacing of the Mo lattice decrease and changes the width of the d-band, which makes the electronic properties of Mo2C similar to that of Pt noble metals, exhibiting excellent electrochemical hydrogen precipitation performance. MoS2, due to its special crystal structure and tunable electronic structure, has been widely studied. In this paper, Mo2C nanoparticles were prepared by high-temperature carbonization, and then two-dimensional layered MoS2 were be loaded on Mo2C nanoparticles by the hydrothermal method to synthesize Mo2C/MoS2 composite catalysts. Their electrochemical hydrogen precipitation (HER) performance under acidic conditions was tested. The above catalysts were also characterized by modern material testing methods such as XRD, SEM, TEM, and XPS. The results showed that the composite catalysts exhibited the most excellent electrochemical hydrogen precipitation performance at Mo2C/MoS2-3, with the lowest overpotential at a current density of 10 mA cm-2, Tafel slope, and electrochemical impedance. At the same time, the electrochemically active area was dramatically enhanced, with good stability under prolonged testing. The catalytic activity was significantly improved compared with that of Mo2C and MoS2. The characterization and experimental results indicate that the heterogeneous structure of Mo2C and MoS2 formed a built-in electric field between the two, which accelerated the electron transfer efficiency and provided more active sites. The Mo2C/MoS2 composite catalyst is a low-cost, easy-to-prepare, and high-efficiency electrochemical hydrogen precipitation catalyst, providing a new idea for developing green and clean energy.

Strategies of regulating Zn2+ solvation structures toward advanced aqueous zinc-based batteries

Rechargeable aqueous zinc-based batteries not only pave the way for environmentally friendly and safe energy storage devices but also hold great promise for reducing the manufacturing costs of next-generation batteries, positioning them as the most promising energy storage system to replace lithium-ion batteries. However, the commercial application of aqueous zinc-based batteries (AZBs) is severely constrained by issues such as zinc dendrites, hydrogen evolution reaction (HER), and electrode corrosion. While significant efforts have been devoted to exploring electrode materials and their storage mechanisms in this system in recent years, research on the nature of Zn2+ solvation in electrolytes remains insufficient. Therefore, this review primarily provides a comprehensive and in-depth elucidation of the existing issues such as dendrite formation, hydrogen/oxygen evolution, electrode corrosion and passivation interactions. Additionally, from the perspective of electrolyte optimization, this review emphasizes existing strategies to address Zn2+ solvation, including adjusting electrolyte concentration, incorporating functional additives or co-solvents, utilizing ionic liquids, and developing hydrogel electrolytes, and summarizes approaches and mechanisms for improving their relevant performance. Finally, prospects for electrolyte modification and innovation directions of AZBs are proposed, providing guidance for future AZB studies.

A DFT and TD-DFT studies of the photosensitizing capabilities of thiophene-based dyes

Dye-sensitized solar cells (DSSCs) play a significant role in the development of affordable, safe, and efficient solar energy technology. In this research, we have designed nine new dyes (J01-09) by modifying an experimentally reported thiophene-based dye (DSS) in the literature. The diethylaniline in the DSS as the electron donating group was replaced with diphenylamine to reduce planarity in the dye. The designed dyes all have donor and acceptor groups linked by a π-linker group (D-π-A). Using DFT and TD-DFT, we investigated the impact of the diphenylamine moieties on the planarity, photochemical and photophysical properties of the modeled dyes in isolation. The optimized structures, UV–Vis absorption, photochemical, and photovoltaic parameters were computed to study the photosensitizing capability of the modeled dyes. The photochemical and photovoltaic parameters of the study include; open-circuit voltage (VOC), light-harvesting efficiency (LHE), driving force of electron injection (ΔGinj), driving force of regeneration (ΔGreg), excited-state lifetime (τ), ionization potential (IP), adiabatic ionization potential (AIP), vertical ionization potential (VIP), electron affinity (EA), chemical hardness (η), electrophilicity index (ω), electron-donating power (ω-) and electron-accepting power (ω+) were calculated. Our findings indicate that only J03 and J08 absorb at longer wavelengths (719 and 753 nm respectively) indicating lower absorption energy bandgap compared to the DSS dye, attributed to the extension of conjugation between the thiophene and donor groups. Also, only J03 and J08 exhibited lower ΔGinj values (−0.985 and −0.667 eV respectively) and ΔGreg values (0.245 and 0.179 eV respectively) implying the dyes can be regenerated spontaneously compared to the DSS dye. Therefore, J03 and J08 are more promising to be developed as a superior photosensitizer in DSSCs.

Advancements in Solid-State Hydrogen Storage: A Review on the Glass Microspheres.

Glass microspheres, with their unique internal structure and chemical stability, offer a promising solution for the challenges of hydrogen storage and transmission, potentially advancing the utility of hydrogen as a safe and efficient energy source. In this review, we systematically evaluate various treatment and modification strategies, including fusion, sol-gel, and chemical vapor deposition (CVD), and compare the performance of different types of glass microspheres. Our synthesis of current research findings reveals that specific low-cost and environmentally friendly modification techniques can significantly enhance the hydrogen storage efficiency of glass microspheres, with some methods increasing storage capacity by up to 32% under certain conditions. Through a detailed life-cycle and cost-benefit assessment, our study highlights the economic and sustainability advantages of using modified glass microspheres. For example, selected alternative materials used in lightweight vehicles have been shown to reduce density by approximately 10% while reducing costs. This review not only underscores the contributions of modified glass microspheres to overcoming the limitations of current hydrogen storage technologies but also provides a systematic framework for improving their performance in hydrogen storage applications. Our research suggests that modified glass microspheres could help to make hydrogen energy more commercially viable and environmentally friendly.

Study on Consumers’ Perceived Benefits and Risks of Smart Energy System

This study explores consumer perceptions of smart energy systems, delving into both the perceived benefits and risks associated with their adoption and usage. This study addresses a crucial gap in understanding the consumer side of smart energy system implementation. Through ordinal logistic regression analysis, the study examines the relationship between various independent variables and an ordinal dependent variable represented on a Likert scale. The findings highlight a significant consumer emphasis on 'Safe Energy System Construction' and 'Economic Benefits,' including 'Home Energy Saving' and 'New Profit Creation.' However, the perceived benefits and risks are influenced by these factors and individual propensities, such as sensitivity to environmental destruction and acceptance of new technology. The study uncovers new areas of concern, exceptionally high energy consumption and the 'Uncertainty of Electricity Rates,' which have not been extensively addressed in previous research. The conclusions drawn from this study suggest a need for balanced policy-making that fosters technological advancement while addressing consumer apprehensions about energy consumption, rate volatility, and privacy. This study contributes to the broader discourse on technology acceptance and the sustainable implementation of smart energy solutions by providing a nuanced understanding of consumer perceptions in the evolving landscape of smart energy systems.

An adaptive fractional controller design for automatic voltage regulator system: sigmoid-based fractional-order PID controller

The primary objective of a power system is to provide safe and reliable electrical energy to consumers. This objective is achieved by maintaining the stability of the power system, a multifaceted concept that can be divided into three distinct classes. The focus of this study is on one of these classes, voltage stability. A critical component in maintaining voltage stability is the automatic voltage regulator (AVR) system of synchronous generators. In this paper, a novel control method, the sigmoid-based fractional-order PID (SFOPID), is introduced with the aim of improving the dynamic response and the robustness of the AVR system. The dandelion optimizer (DO), a successful optimization algorithm, is used to optimize the parameters of the proposed SFOPID control strategy. The optimization process for the DO-SFOPID control strategy includes a variety of objective functions, including error-based metrics such as integral of absolute error, integral of squared error, integral of time absolute error, and integral of time squared error, in addition to the user-defined Zwee Lee Gaing’s metric. The effectiveness of the DO-SFOPID control technique on the AVR system has been rigorously investigated through a series of tests and analyses, including aspects such as time domain, robustness, frequency domain, and evaluation of nonlinearity effects. The simulation results are compared between the proposed DO-SFOPID control technique and the fractional-order PID (FOPID) and sigmoid-based PID (SPID) control techniques, both of which have been tuned using different metaheuristic algorithms that have gained significant recognition in recent years. As a result of these comparative analyses, the superiority of the DO-SFOPID control technique is confirmed as it shows an improved performance with respect to the other control techniques. Furthermore, the performance of the proposed DO-SFOPID control technique is validated within an experimental setup for the AVR system. The simulation results show that the proposed DO-SFOPID control technique is highly successful in terms of stability and robustness. In summary, this study provides comprehensive evidence supporting the effectiveness and superiority of the DO-SFOPID control technique on the AVR system through both simulation and experimental results.

Magnetic cobalt metal organic framework for photocatalytic water splitting hydrogen evolution

Using water as a renewable and safe energy source for hydrogen generation has reduced the need to use toxic fossil fuels. Photocatalytic approaches provide a worthy solution to avoid the high expenditure on complicated electrochemical pathways to promote Hydrogen Evolution Reactions. However, several types of photocatalysts including noble metal-based catalysts have already been in use for this purpose, which are generally considered high-cost as well. The present study aims to use the benefits of metal–organic frameworks (MOFs) with semiconductor-like characteristics, highly porous structures and high design flexibility. These properties of MOFs allow more efficient and effective mass transport as well as exposure to light.in this paper, using MOF technology and benefiting from the characteristics of Fe3O4 nanoparticles as catalyst support for more efficient separation of catalyst, we have synthesized a novel composite. Our proposed photocatalyst demonstrates efficient harvest of light in all wavelengths from UV to visible to generate electron/hole pairs suitable for water splitting with a turnover frequency of 0.222 h−1 at ambient conditions without requiring any additives.Graphical abstract

Safe Energy using Hydraulic System Analysis at a Hydropower Plant

The Hydro-PowerStation is one of the keys (important) sources of electricity, and it has a digital governor, which improves production efficiency over mechanical governors. This research looked at the hydraulic turbine, found flaws such as oil leakage from the pumps utilized, calculated the amount of energy consumed, and worked to reduce it by measuring the losses and monitoring the poor process during periods of high water load of up to 83%. As a consequence of the research, it was discovered that the amount of energy consumed had decreased by 20%, by employing well-made, effective pumps for each unit according to its use, oil leakage in all units is reduced.

Ionic Conductivity Analysis of NASICON Solid Electrolyte Coated with Polyvinyl-Based Polymers

The global environmental crisis necessitates reliable, sustainable, and safe energy storage solutions. The current systems are nearing their capacity limits due to the reliance on conventional liquid electrolytes, which are fraught with stability and safety concerns, prompting the exploration of solid-state electrolytes, which enable the integration of metal electrodes. Solid-state sodium-ion batteries emerge as an appealing option by leveraging the abundance, low cost, and sustainability of sodium. However, low ionic conductivity and high interfacial resistance currently prevent their widespread adoption. This study explores polyvinyl-based polymers as wetting agents for the NASICON-type NZSP (Na3Zr2Si2PO12) solid electrolyte, resulting in a combined system with enhanced ionic conductivity suitable for Na-ion solid-state full cells. Electrochemical impedance spectroscopy (EIS) performed on symmetric cells employing NZSP paired with different wetting agent compositions demonstrates a significant reduction in interfacial resistance with the use of poly(vinyl acetate)—(PVAc-) based polymers, achieving an impressive ionic conductivity of 1.31 mS cm−1 at room temperature, 63.8% higher than the pristine material, notably reaching 7.36 mS cm−1 at 90 °C. These results offer valuable insights into the potential of PVAc-based polymers for advancing high-performance solid-state sodium-ion batteries by reducing their total internal resistance.

Screening of Amino Acids as a Safe Energy Source for Isolated Rat Pancreatic Acini.

Amino acids play an essential role in protein synthesis, metabolism, and survival of pancreatic acini. Adequate nutritional support is important for acute pancreatitis treatment. However, high concentrations of arginine and lysine may induce acute pancreatitis. The study aimed to identify the most suitable l -amino acids as safe energy sources for pancreatic acinar cells. Pancreatic acini were isolated from male Wistar rats. Effects of amino acids (0.1-20 mM) on uncoupled respiration of isolated acini were studied with a Clark electrode. Cell death was evaluated with fluorescent microscopy and DNA gel electrophoresis. Among the tested amino acids, glutamate, glutamine, alanine, lysine, and aspartate were able to stimulate the uncoupled respiration rate of isolated pancreatic acini, whereas arginine, histidine, and asparagine were not. Lysine, arginine, and glutamine (20 mM) caused complete loss of plasma membrane integrity of acinar cells after 24 hours of incubation. Glutamine also caused early (2-4 hours) cell swelling and blebbing. Aspartate, asparagine, and glutamate only moderately decreased the number of viable cells, whereas alanine and histidine were not toxic. DNA fragmentation assay and microscopic analysis of nuclei showed no evidence of apoptosis in cells treated with amino acids. Alanine and glutamate are safe and effective energy sources for mitochondria of pancreatic acinar cells.

Heavily vanadium-doped LiFePO4 olivine as electrode material for Li-ion aqueous rechargeable batteries

Since LiFePO4 batteries play a major role in the transition to safe, more affordable and sustainable energy production, numerous strategies have been applied to modify LFP cathode, with the aim of improving its electrochemistry. In this contribution, a highly vanadium-doped LiFe0.9V0.1PO4/C composite (LFP/C-10V) is synthesized using the glycine combustion method and characterized by x-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Thermogravimetry Differential Thermal Analysis (TGDTA) and Cyclic Voltammetry (CV). It is shown that 10wt.% of vanadium can substitute Fe positions, thus decreasing unit cell volume, which is followed by generation of Li3V2PO4 traces, as detected by CV. High vanadium doping does not change the carbon content in the composite (≈13 wt%) but improves its electronic conductivity and electrochemical performance in both aqueous and organic electrolytes. The reversibility and current response are increasing following the trend: LFP/C, LFP/C -3mol%V, LFP/C - 5 mol % and LFP/C-10 mol %. The best specific capacity is obtained for the most highly doped olivine, which exhibits a reversible process at 1 mV s−1 in an aqueous electrolyte, thus showing a peak-to-peak distance of 56 mV. The high capacity of LFPC-10V is measured in both LiNO3 and NaNO3 electrolytes amounting to around 100 mAh g−1 at 20 mV s−1. Still, the material is only stable in LiNO3 electrolyte, making it more suitable for Li than Na-ion aqueous rechargeable batteries.