Perylene Diimide Research Articles

Host-guest binding between cucurbit[8]uril and amphiphilic peptides achieved tunable supramolecular aggregates for cancer diagnosis.

The manipulation of biocompatible supramolecular nanostructures at subcellular and cellular levels has become one of the increasingly significant topics but remains a formidable challenge in chemical and biological science. In this work, a controllable supramolecular aggregate based on host-guest competitive binding is elaborately constructed using cucurbit[8]uril, methionine-containing amphiphilic peptide, and perylene diimide, displaying in situ oxidation-driven macrocycle-confined fluorescence enhancement for cell imaging and morphological reconstruction for cancer cell death. The experimental results demonstrate that cucurbit[8]uril possesses a high binding affinity with the methionine peptide, while this value sharply decreases after the methionine residue is oxidized to sulfoxide or sulfone. Therefore, perylene diimide can be competitively included by cucurbit[8]uril in the co-assemblies, eventually resulting in a 10-fold fluorescence enhancement and the conversion of topological morphology from nano-sized particles to micron-sized sheets. Moreover, the obtained ternary assemblies can be oxidized by endogenous reactive oxygen species in cancer cells, thus not only providing enhanced fluorescence for cell imaging, but also leading to endoplasmic reticulum dysfunction and significant cell death. Therefore, the controllable and oxidation-responsive morphological transformation based on the host-guest competitive binding in biological media can be viewed as a feasible means for efficient disease theragnosis.

Fluorescent molecular systems based on carborane-perylenediimide conjugates.

This study presents the successful synthesis of two perylenediimide (PDI)-based ortho-carborane (o-carborane) derivatives, PDI-CB1 and PDI-CB2, through the insertion of decaborane into alkyne-terminated PDIs (PDI1 and PDI2). The introduction of o-carborane groups did not alter the optical properties of the PDI units in solution compared to their carborane-free counterparts, maintaining excellent fluorescence quantum yields of around 100% in various solvents. This was achieved by using a methylene linker to minimize electronic interaction between PDI and o-carborane, and by incorporating bulky o-carborane groups at imide- position to enhance solubility and prevent π-π stacking-induced aggregation. Aggregation studies demonstrated that PDI-CB1 and PDI-CB2 have greater solubility than PDI1 and PDI2 in both nonpolar and aqueous solvents. Despite the steric hindrance imparted by the o-carborane units, the solid state emission of PDI-CB1 and PDI-CB2 was affected by aggregation-caused fluorescence quenching. However, solid PDI-CB1 preserved bright red excimer-type emission, which persisted in water-dispersible nanoparticles, indicating potential for application as a theranostic agent combining fluorescence bioimaging with anticancer boron neutron capture therapy (BNCT) due to its high boron content.

Precise synthesis of BN embedded perylene diimide oligomers for fast-charging and long-life potassium-organic batteries.

Replacing the C[double bond, length as m-dash]C bond with an isoelectronic BN unit is an effective strategy to tune the optoelectronic properties of polycyclic aromatic hydrocarbons (PAHs). However, precise control of the BN orientations in large PAH systems is still a synthetic challenge. Herein, we demonstrate a facile approach for the synthesis of BN embedded perylene diimide (PDI) nanoribbons, and the polarization orientations of the BN unit were precisely regulated in the two PDI trimers. These BN doped PDI oligomers show great potential as organic cathodes for potassium-ion batteries (PIBs). In particular, trans-PTCDI3BN exhibits great improvement in voltage potential, reversible capacities (ca. 130 mA h g-1), superior rate performance (19 s to 69% of the maximum capacity) and ultralong cyclic stability (nearly no capacity decay over 30 000 cycles), which are among those of state-of-the-art organic-based cathodes. Our synthetic approach stands as an effective way to access large PAHs with precisely controlled BN orientations, and the BN doping strategy provides useful insight into the development of organic electrode materials for secondary batteries.

The efficient triplet states formation of Se-modified PDI dimers and tetramers in solvents.

The triplet excited states of molecules play an important role in photophysical processes, which has attracted great research interest. Perylene diimide (PDI) is a widely studied material closely associated with the generation of triplet states, and it is highly anticipated to become an electron acceptor material for improving photovoltaic conversion efficiency. In this work, we prepared dimers and tetramers composed of selenium-modified PDI-C5 (N,N'-bis(6-undecyl) perylene-3,4,9,10-bis(dicarboximide)) units. We investigated the photophysical processes of these dimers and tetramers in chloroform and toluene using UV-visible absorption spectroscopy, fluorescence spectroscopy, and femtosecond transient absorption spectroscopy. Both the dimers and tetramers undergo efficient triplet state formation processes in the solvents. Solvents with higher polarity facilitate charge transfer thereby promote the triplet states formation. The differences in the configurations of the dimer and tetramer molecules lead to variations in triplet states generation. The twisted angles in the tetramer restricted the intramolecular electronic coupling, posing certain hindrances to exciton coupling and lowering the intramolecular CT characteristics. The emission of excimer in tetramers also competes with the triplet states formation. The research demonstrates the influence of various factors on the generation of triplet states of PDI oligomers.

NIR absorbing ferrocenyl perylenediimide-based donor-acceptor chromophores.

A set of ferrocenyl-functionalized perylenediimide (PDI) compounds and their 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) derivatives 1-5 were designed and synthesized using palladium-catalyzed Sonogashira cross-coupling, followed by a thermally activated [2 + 2] cycloaddition-retroelectrocyclization [CA-RE] reaction with a 1,1,2,2-tetracyanoethylene (TCNE) acceptor in good yields. The TCBD group works as an acceptor, whereas the ferrocenyl group acts as a donor at the central PDI core. The effects of varying the number of ferrocenyl and TCNE groups on the photophysical, thermal, electrochemical, and spectroelectrochemical properties were studied. The di-substituted PDI derivatives 3, 4, and 5 exhibit bathochromic shifts in the absorption spectra compared to 1 and 2, attributed to the extended π-conjugation. The electrochemical analysis of derivatives 2, 4, and 5 shows multiple reduction waves in the low potential region due to the presence of TCBD and perylenediimide acceptor units. Spectroelectrochemical studies were performed, showing that upon applying redox potentials, the absorption spectra shifted from the visible to the near-infrared (NIR) region. Computational calculations indicate that in the HOMO, the electron density is localized on the ferrocene unit, while in the LUMO, it is distributed over the PDI-TCBD unit, indicating a strong D-A interaction.

Tuning conductivity while maintaining mechanical properties in perylene bisimide hydrogels at physiological pH.

By using different salts as a method to achieve gelation of two different amino-acid-functionalised perylene bisimides, we were able to tune reduction potentials while maintaining the mechanical and optical properties of the system all at pH 7.4.

Peptide appended perylene bisimide containing silver nanoparticle-based trihybrid system with GO: improvement of photocatalytic and photo-switching behaviour

This report demonstrates a facile environmentally friendly synthesis of a trihybrid system (PBI-NP-GO) consisting of perylene bisimide appended peptide (PBI-UW) nanofibers, silver nanoparticles (PBI-AgNP) and graphene oxide (GO) nano-sheet. The...

A simple protocol for the synthesis of perylene bisimides from perylene tetracarboxylic dianhydride.

Perylene bisimides are highly attractive polycyclic aromatic hydrocarbons due to their photostability associated to unique and characteristic photochemical properties. They have been widely used for analytical purposes, despite the hydrophobicity of most of these compounds. The ring substitution pattern plays an important role in fine-tuning the physicochemical properties that govern solubility and aggregation. In this work, a selection of perylene bisimides were prepared from the reaction of perylenetetracarboxylic dianhydride with α-amino acids or primary aliphatic and aromatic amines. These molecules were obtained in good yield by a simple synthetic protocol based on the use of imidazole as a green solvent and avoiding the need for complex purification methods, a major advantage for future applications. Functionalization of the exocyclic substituent can also be performed and was exemplified by the incorporation of the maleimide and anthraquinone moieties.

Mutual induced fit transition structure stabilization of corannulene's bowl-to-bowl inversion in a perylene bisimide cyclophane.

Corannulene is known to undergo a fast bowl-to-bowl inversion at r.t. via a planar transition structure (TS). Herein we present the catalysis of this process within a perylene bisimide (PBI) cyclophane composed of chirally twisted, non-planar chromophores, linked by para-xylylene spacers. Variable temperature NMR studies reveal that the bowl-to-bowl inversion is significantly accelerated within the cyclophane template despite the structural non-complementarity between the binding site of the host and the TS of the guest. The observed acceleration corresponds to a decrease in the bowl-to-bowl inversion barrier of 11.6 kJ mol-1 compared to the uncatalyzed process. Comparative binding studies for corannulene (20 π-electrons) and other planar polycyclic aromatic hydrocarbons (PAHs) with 14 to 24 π-electrons were applied to rationalize this barrier reduction. They revealed high binding constants that reach, in tetrachloromethane as a solvent, the picomolar range for the largest guest coronene. Computational models corroborate these experimental results and suggest that both TS stabilization and ground state destabilization contribute to the observed catalytic effect. Hereby, we find a "mutual induced fit" between host and guest in the TS complex, such that mutual geometric adaptation of the energetically favored planar TS and curved π-systems of the host results in an unprecedented non-planar TS of corannulene. Concomitant partial planarization of the PBI units optimizes noncovalent TS stabilization by π-π stacking interactions. This observation of a "mutual induced fit" in the TS of a host-guest complex was further validated experimentally by single crystal X-ray analysis of a host-guest complex with coronene as a qualitative transition state analogue.

Theoretical study on photophysical properties of double helicenes entwined with two perylene diimides

Double helicenes, with their notable chirality and intriguing properties, have captivated the great interest of chemists. Comprehending the relationship between their structure and properties is fundamentally significant for enhancing performance...

Recent advancements in perylene diimide as an electron acceptor in organic solar cells

Interest in alternative powering solutions for the growing internet of things (IoT) has boosted the research on third-generation solar cell devices.

Modification of nanodiamonds for fluorescence bioimaging.

Non-invasive bioimaging is essential in enhancing pre-clinical diagnosis and therapy. Developing efficient imaging probes with high stability, low toxicity, and the potential of offering high resolution images is a very important aspect of developing non-invasive bioimaging techniques. Fluorescent nanodiamonds, which are produced by high energy beam irradiation and high temperature/pressure treatment, have been extensively investigated. In this study, we report the chemical modification of common nanodiamonds (prepared by detonation and high-pressure high-temperature milling) using a stable fluorophore (perylene diimide derivative) via carbodiimide coupling. The resulting nanodiamonds show good biocompatibility, cellular uptake and fluorescent imaging potential with mesenchymal stromal cells. This method provides an efficient alternative approach to the preparation and the use of fluorescent nanodiamonds for bioimaging, with the potential benefit of chemically adjusting the structure of perylene diimide for optimized emission/absorbance wavelength.

A perylene diimide electrochemical probe with persulfate as a signal enhancer for dopamine sensing.

Dopamine (DA) is an important biomarker related to parkinsonism, schizophrenia and renal disease. Traditional electrochemical sensors for DA were based on the direct electrochemical oxidation of DA. In this paper, we report a new sensing strategy using N,N'-di(trimethylaminoethyl)perylene diimide (TMPDI) as an electrochemical probe and K2S2O8 as a signal enhancer for DA detection between 0 and -0.7 V with the DPV technique. MoS2 nanoflowers prepared by the hydrothermal method were used as a nanocarrier to load TMPDI. The reduction current of TMPDI was found to show a stepwise and significant increase at -0.24 V with the increase of concentration of K2S2O8 due to the continuous cycle of TMPDI molecules' electrochemical reduction and chemical oxidation. The presence of DA caused a large decrease of the reduction current of TMPDI due to the synergistic interaction of the competitive consumption of DA for K2S2O8 and the blocking effect of polyDA adhering to the electrode surface. The decreased current exhibited a linear response for DA from 10 pM to 100 μM with a detection limit of 4.1 pM and the proposed sensor showed high selectivity and excellent feasibility in human urine/serum sample detection.

Recent progress in perylene diimide supermolecule-based photocatalysts

This review focuses on recent advancements in perylene diimide supramolecular (PDI)-based photocatalysts.

A fluorinated perylene diimide for polar and non-polar green solvent processed organic photovoltaic cathode interlayers

A new fluorinated N-annulated perylene diimide molecule for use as a cathode interlayer in organic solar cells. Fluorination increases solubility and allows for processing from a range of green solvents, including heptane for the first time.

Rational design of perylene diimide macrocycles with diverse electron transfer properties in complexes with fullerene

Perylene diimide (PDI)-based macrocycles offer a versatile platform for creating host-guest complexes with fullerenes. About 100 bay- and ortho-substituted PDIs, as well as their -extended derivatives have been tested to...

Conjugated polymer electrodes fabricated using rylene-based acceptors toward high energy and power density symmetric supercapacitors operable in an organic electrolyte environment

Conjugated polymer electrodes based on perylene diimide (PDI)–benzothiadiazole (BT) for symmetric supercapacitor device.

Efficient tuning of optoelectronic properties of 1,6- and 1,7-disubstituted perylene diimides: agreement between theory and experiment

Both the 1,7- and 1,6-regioisomers of PDI may find applications in organic electronics as they exhibit similar yet unique properties, however, the purity of these regioisomers is crucial.

Ti3C2Tx MXene bonded perylene diimide as a robust charge host for seawater electrolytes.

In this work, we report Ti3C2Tx MXene bonded cationic perylene diimide (cPDI) as a redox charge storage host for seawater-based electrolytes. A reversible and stable charge storage capacity of ∼101 mA h g-1 is achieved in 3 M MgCl2 electrolytes at a current density of 0.25 A g-1 with an extended cycling stability of more than 8000 cycles. The redox charge storage dynamics of cPDI in metal-ion electrolytes are mapped through three-dimensional Bode plots.

Functionality optimization for effective singlet fission coupling screening in the full-dimensional molecular and intermolecular coordinate space.

In computational chemistry, accurately predicting molecular configurations that exhibit specific properties remains a critical challenge. Its intricacies become especially evident in the study of molecular aggregates, where the light-induced functionality is tied to highly structure-dependent electronic couplings between molecules. Here, we present an efficient strategy for the targeted screening of the structural space employing a "functionality optimization" technique, in which a chosen descriptor, constrained by the ground state energy expression, is optimized. The chosen algorithmic differentiation (AD) framework allows one to automatically obtain gradients without its tedious implementation. We demonstrate the effectiveness of the approach by identifying perylene bisimide (PBI) dimer motifs with enhanced effective SF coupling. Our findings reveal that certain structural modifications of the PBI monomer, such as helical twisting and bending as well as slipped-rotated packing arrangements, can significantly increase the effective SF coupling.