Rounds Of Error-prone PCR Research Articles

Thermostability Enhancement of GH 62 α-l-Arabinofuranosidase by Directed Evolution and Rational Design.

GH 62 arabinofuranosidases are known for their excellent specificity for arabinoxylan of agroindustrial residues and their synergism with endoxylanases and other hemicellulases. However, the low thermostability of some GH enzymes hampers potential industrial applications. Protein engineering research highly desires mutations that can enhance thermostability. Therefore, we employed directed evolution using one round of error-prone PCR and site-saturation mutagenesis for thermostability enhancement of GH 62 arabinofuranosidase from Aspergillus fumigatus. Single mutants with enhanced thermostability showed significant ΔΔG changes (<-2.5 kcal/mol) and improvements in perplexity scores from evolutionary scale modeling inverse folding. The best mutant, G205K, increased the melting temperature by 5 °C and the energy of denaturation by 41.3%. We discussed the functional mechanisms for improved stability. Analyzing the adjustments in α-helices, β-sheets, and loops resulting from point mutations, we have obtained significant knowledge regarding the potential impacts on protein stability, folding, and overall structural integrity.

Flexible active-site loops fine-tune substrate specificity of hyperthermophilic metallo-oxidases

Hyperthermophilic (‘superheat-loving’) archaea found in high-temperature environments such as Pyrobaculum aerophilum contain multicopper oxidases (MCOs) with remarkable efficiency for oxidizing cuprous and ferrous ions. In this work, directed evolution was used to expand the substrate specificity of P. aerophilum McoP for organic substrates. Six rounds of error-prone PCR and DNA shuffling followed by high-throughput screening lead to the identification of a hit variant with a 220-fold increased efficiency (kcat/Km) than the wild-type for 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) without compromising its intrinsic activity for metal ions. The analysis of the X-ray crystal structure reveals four proximal mutations close to the T1Cu active site. One of these mutations is within the 23-residues loop that occludes this site, a distinctive feature of prokaryotic MCOs. The increased flexibility of this loop results in an enlarged tunnel and one additional pocket that facilitates bulky substrate-enzyme interactions. These findings underscore the synergy between mutations that modulate the dynamics of the active-site loop enabling enhanced catalytic function. This study highlights the potential of targeting loops close to the T1Cu for engineering improvements suitable for biotechnological applications.Graphical

Improved thermostability of type I pullulanase from Bacillus thermoliquefaciens by error-prone PCR

Pullulanase (PulB) is a starch-debranching enzyme. In order to improve its catalytic performance, random mutagenesis was performed on the pullulanase gene derived from Bacillus thermoliquefaciens. Two rounds of error-prone PCR were carried out. Mutant T252S was screened in the first round of error-prone library, which had the highest catalytic activity. During the second round of mutations, mutant enzyme G250P/T252S/G253T/N255K was screened, which had further improved catalytic activity and the best thermostability. Compared with the parent enzyme, the specific activity of mutant enzyme G250P/T252S/G253T/N255K increased by 1.9 times, Km decreased by 22.7 %, kcat increased by 28.7 %, and kcat/Km increased by 68.4 %. The thermostability of the mutant enzyme improved significantly, showing that the half-life at 60 °C was extended to 7.5 h, which was 87.5 % higher than that of the parent enzyme. The mutation sites in these two rounds were concentrated in the 250–255 regions, indicating that this region was an important region affecting the catalytic activity and Thermostability. The reasons for the change of enzymtic properties was also preliminarily analyzed through three-dimensional simulation.

Molecular identification of scale insect (Eulecanium giganteum) in Hibiscus rosa-sinensis

Hibiscus rosa-sinensis is a widely grown evergreen valuable medicinal, ornamental species planted in India. Scale insects are small herbivorous insects found on all continents and they are serious sap sucking pests of many ornamental plants. These scale insects are undetectable due to their tiny size, basic morphology, and polyphagous feeding nature. Hence, the management of these tiny insects become a serious concern across the globe. To afford a prospective solution to the problem, an accurate, simple, and developmental-stage-independent identification method is required, hence this study attempted the molecular identification of scale insect in Hibiscus rosa-sinensis using mitochondrial gene Cytochrome Oxidase Subunit I (mtCOI) sequencing. The experiment was carried out by isolating insect DNA using a modified CTAB method. Through two or three rounds of error-prone PCR followed by a steady procedure to amplify a mtCOI region. This region of mtCOI has been used as a standard DNA barcode for a diverse array of taxa. The confirmation has been done by sequencing of mtCOI which suggest the highest similarities with Eulecanium giganteum. This study addresses the questions of biodiversity and molecular characterization of scale insects. Further, the information obtained in this study provides baseline data for future crop improvement programs and integrated pest management strategies.

Enhancing the activity and thermal stability of a phthalate-degrading hydrolase by random mutagenesis

Our previous work has reported that EstJ6 was a phthalate-degrading hydrolase. In the study, a random mutant library was constructed by two rounds of error-prone PCR, three mutants (ET1.1, ET2.1, and ET2.2) with enhanced hydrolytic activity against dibutyl phthalate (DBP) were obtained. The best mutant ET2.2, accumulated three amino acid substitutions (Thr91Met, Ala67Val, and Val249Ile) and exhibited 2.8-fold increase enzyme activity and 2.3-fold higher expression level. Meanwhile, compared with EstJ6, ET2.2 showed over 50% improvement in thermostability (at 50 °C for 1 h) and 1.2-fold increase in 50% methanol tolerance. Kinetic parameters analysis revealed that the Km value for ET2.2 decreased by 60% and the kcat/Km value increased by 166%. The molecular docking indicated that the shortening of hydrogen bond between Ser146-OH and DBP-CO, which may led to an increase in enzyme activity and catalytic efficiency, the enhancement of hydrophobicity of hydrophobic pocket was related to the improvement of organic solvents tolerance, and three hydrophobic amino acid substitutions Thr91Met, Ala67Val, and Val249Ile facilitated to improve the thermal stability and organic solvents tolerance. These results confirmed that random mutagenesis was an effective tool for improving enzyme properties and lay a foundation for practical applications of phthalate-degrading hydrolase in biotechnology and industrial fields.

Directed evolution of a 6-phosphogluconate dehydrogenase for operating an enzymatic fuel cell at lowered anodic pHs

Most enzymatic fuel cells (EFCs) are designed for operating at physiological conditions and cannot stand for low pHs due to the enzyme denaturation. Improving the acid tolerance of EFCs represents the increased robustness and diversity of their practical applications. In this study, we successfully constructed a three-enzyme pathway-catalyzed EFC consisting of two dehydrogenases and a diaphorase that can be operated at the anodic pH of 5.4. The acid-intolerance of one enzyme, 6-phosphogluconate dehydrogenase, was overcome by enzyme engineering. After the directed evolution including three rounds of error-prone PCR and a petri-dish-based double-layer screening method, the best 6-phosphogluconate dehydrogenase mutant (named as 3-3) exhibited a 42-fold increase in catalytic efficiency at pH 5.4 compared to the original enzyme. The electrochemical measurements revealed that the EFC equipped with this mutant achieved a maximum power density of 0.13 mW cm−2 at pH 5.4, more than 10-fold higher than that with the same enzyme unit loading but at pH 7.3. Under a high loading amount of enzymes, the EFC yielded a maximum power density of ∼0.5 mW cm−2, and that with the mutant also exhibited an improved stability. This study demonstrates that lowering anodic pH may be a useful strategy for constructing high-performance and robust EFCs and the concerns for enzyme deactivation can be addressed by enzyme engineering.

Activity Improvement of Organophosphorus Hydrolase Enzyme by Error Prone PCR Method

Introduction: Organophosphorus compounds are frequently used as pesticides and insecticides in agriculture, livestock and home. Because of the high toxicity, it seems is very important its removal from the environment. An enzyme called organophosphorus hydrolase (OPH) is responsible for the decomposition of organophosphorus compounds in most of the strains. Production of enzymes and strains with more efficiency is frequently performed by genetic engineering techniques. Materials and Methods: In this study, we used PCR-based method for quick and easy improvement in activity of OPH enzyme. We selected 5.5 mM Mg2+ and 0.2 mM and Mn2+ concentrations for high PCR product. Results: After one round of error prone PCR (epPCR), The 5 number of screened strains (29%) were shown more ability than the native strains to degrade of diazinon, with more than 25% raising ratio. The E6 strain was found to have highest improvement degradation, with 29.3% improvement. At 48-hour time point, the E6 strains were able to completely remove of diazinon. Conclusions: The epPCR method has the low complexity than other methods and can provide a diverse library include efficient mutants.

Enhancement of the catalytic activity of Isopentenyl diphosphate isomerase (IDI) from Saccharomyces cerevisiae through random and site-directed mutagenesis

BackgroundLycopene is a terpenoid pigment that has diverse applications in the food and medicine industries. A prospective approach for lycopene production is by metabolic engineering in microbial hosts, such as Escherichia coli. Isopentenyl diphosphate isomerase (IDI, E.C. 5.3.3.2) is one of the rate-limiting enzymes in the lycopene biosynthetic pathway and one major target during metabolic engineering. The properties of IDIs differ depending on the sources, but under physiological conditions, IDIs are limited by low enzyme activity, short half-life and weak substrate affinity. Therefore, it is important to prepare an excellent IDI by protein engineering.ResultsDirected evolution strategy (error-prone PCR) was utilized to optimize the activity of Saccharomyces cerevisiae IDI. Using three rounds of error-prone PCR; screening the development of a lycopene-dependent color reaction; and combinatorial site-specific saturation mutagenesis, three activity-enhancing mutations were identified: L141H, Y195F, and W256C. L141H, located near the active pocket inside the tertiary structure of IDI, formed a hydrogen bond with nearby β-phosphates of isopentenylpyrophosphate (IPP). Phe-195 and Cys-256 were nonpolar amino acids and located near the hydrophobic group of IPP, enlarging the hydrophobic scope, and the active pocket indirectly. Purified IDI was characterized and the result showed that the Km of mutant IDI decreased by 10% compared with Km of the parent IDI, and Kcat was 28% fold improved compared to that of the original IDI. Results of a fermentation experiment revealed that mutant IDI had a 1.8-fold increased lycopene production and a 2.1-fold increased yield capacity compared to wild-type IDI.ConclusionWe prepared an engineered variant of IDI with improved catalytic activity by combining random and site directed mutagenesis. The best mutants produced by this approach enhanced catalytic activity while also displaying improved stability in pH, enhanced thermostability and longer half-life. Importantly, the mutant IDI could play an important role in fed-batch fermentation, being an effective and attractive biocatalyst for the production of biochemicals.

Directed evolution of mevalonate kinase in Escherichia coli by random mutagenesis for improved lycopene.

Lycopene is a terpenoid pigment that has diverse applications in the fields of food and medicine. Metabolic engineering in microbial hosts has shown that mevalonate kinase (MK, EC2.7.1.366) is one of the rate-limiting enzymes in the lycopene synthetic pathway. In this study, a directed evolution strategy in Escherichia coli was used to optimize the activity of Saccharomyces cerevisiae MK. Using three rounds of error-prone PCR; screening the development of a lycopene-dependent color reaction; and combinatorial site-specific saturation mutagenesis, three activity-enhancing mutations were identified: V13D, S148I, and V301E. V13D was near the MK catalytic center, in the β-sheet that forms a salt-bridge with nearby Arg-248. S148I was located in the α-helix lid and improved the stability of the α-helix. V301E may increase MK folding by influencing its secondary structure. The Km (RS)-mevalonate of purified mutant MK decreased by 74% compared with the Km (RS)-mevalonate of the wild-type MK, and the Kcat (RS)-mevalonate was improved by 26% compared with wild type. Fermentation experiments revealed that lycopene production of the mutant MK increased 2.4-fold compared with wild-type MK.

Establishment and application of a modified membrane-blot assay for Rhizomucor miehei lipases aimed at improving their methanol tolerance and thermostability.

Directed evolution has been proved an effective way to improve the stability of proteins, but high throughput screening assays for directed evolution with simultaneous improvement of two or more properties are still rare. In this study, we aimed to establish a membrane-blot assay for use in the high-throughput screening of Rhizomucor miehei lipases (RMLs). With the assistance of the membrane-blot screening assay, a mutant E47K named G10 that showed improved thermal stability was detected in the first round of error-prone PCR. Using G10 as the parent, two variants G10-11 and G10-20 that showed improved thermal stability and methanol tolerance without loss of activity compared to the wild type RML were obtained. The T5060-value of G10-11 and G10-20 increased by 12°C and 6.5°C, respectively. After incubation for 1h, the remaining residual activity of G10-11 and G10-20 was 63.45% and 74.33%, respectively, in 50% methanol, and 15.98% and 30.22%, respectively, in 80% methanol. Thus, we successfully developed a membrane-blot assay that could be used for the high-throughput screening of RMLs with improved thermostability and methanol tolerance. Based on our findings, we believe that our newly developed membrane-blot assay will have potential applications in directed evolution in the future.

Rapid asymmetric reduction of ethyl 4-chloro-3-oxobutanoate using a thermostabilized mutant of ketoreductase ChKRED20.

Ethyl (S)-4-chloro-3-hydroxybutanoate ((S)-CHBE) is an important chiral intermediate for the synthesis of "blockbuster" drug statins. The carbonyl reductase ChKRED20 from Chryseobacterium sp. CA49 was found to catalyze the bio-reductive production of (S)-CHBE with excellent stereoselectivity (>99.5 % ee). Perceiving a capacity for improvement, we sought to increase the thermostability of ChKRED20 to allow a higher reaction temperature. After one round of error-prone PCR (epPCR) library screening followed by the combination of beneficial mutations, a triple-mutant MC135 was successfully achieved with substantially enhanced thermostablity. The activity of MC135 at 50 °C was similar to the wild type. However, at its temperature optima of 65 °C, the mutant displayed 63 % increase of activity compared to the wild type and remained >95 % activity after being incubated for 15 days, while the wild type had a half-life of 11.9 min at 65 °C. At a substrate/catalyst ratio of 100 (w/w), the mutant catalyzed the complete conversion of 300 g/l substrate within 1 h to yield enantiopure (S)-CHBE with an isolated yield of 95 %, corresponding to a space-time yield of 1824 mM/h.

Tuning the Phosphoryl Donor Specificity of Dihydroxyacetone Kinase from ATP to Inorganic Polyphosphate. An Insight from Computational Studies.

Dihydroxyacetone (DHA) kinase from Citrobacter freundii provides an easy entry for the preparation of DHA phosphate; a very important C3 building block in nature. To modify the phosphoryl donor specificity of this enzyme from ATP to inorganic polyphosphate (poly-P); a directed evolution program has been initiated. In the first cycle of evolution, the native enzyme was subjected to one round of error-prone PCR (EP-PCR) followed directly (without selection) by a round of DNA shuffling. Although the wild-type DHAK did not show activity with poly-P, after screening, sixteen mutant clones showed an activity with poly-phosphate as phosphoryl donor statistically significant. The most active mutant presented a single mutation (Glu526Lys) located in a flexible loop near of the active center. Interestingly, our theoretical studies, based on molecular dynamics simulations and hybrid Quantum Mechanics/Molecular Mechanics (QM/MM) optimizations, suggest that this mutation has an effect on the binding of the poly-P favoring a more adequate position in the active center for the reaction to take place.

Directed Evolution and Structural Analysis of Alkaline Pectate Lyase from the Alkaliphilic Bacterium Bacillus sp. Strain N16-5 To Improve Its Thermostability for Efficient Ramie Degumming.

Thermostable alkaline pectate lyases have potential applications in the textile industry as an alternative to chemical-based ramie degumming processes. In particular, the alkaline pectate lyase from Bacillus sp. strain N16-5 (BspPelA) has potential for enzymatic ramie degumming because of its high specific activity under extremely alkaline conditions without the requirement for additional Ca(2+). However, BspPelA displays poor thermostability and is inactive after incubation at 50°C for only 30 min. Here, directed evolution was used to improve the thermostability of BspPelA for efficient and stable degumming. After two rounds of error-prone PCR and screening of >12,000 mutants, 10 mutants with improved thermostability were obtained. Sequence analysis and site-directed mutagenesis revealed that single E124I, T178A, and S271G substitutions were responsible for improving thermostability. Structural and molecular dynamic simulation analysis indicated that the formation of a hydrophobic cluster and new H-bond networks was the key factor contributing to the improvement in thermostability with these three substitutions. The most thermostable combined mutant, EAET, exhibited a 140-fold increase in the t50 (time at which the enzyme loses 50% of its initial activity) value at 50°C, accompanied by an 84.3% decrease in activity compared with that of wild-type BspPelA, while the most advantageous combined mutant, EA, exhibited a 24-fold increase in the t50 value at 50°C, with a 23.3% increase in activity. Ramie degumming with the EA mutant was more efficient than that with wild-type BspPelA. Collectively, our results suggest that the EA mutant, exhibiting remarkable improvements in thermostability and activity, has the potential for applications in ramie degumming in the textile industry.

Improved xylose uptake inSaccharomyces cerevisiaedue to directed evolution of galactose permease Gal2 for sugar co-consumption

Saccharomyces cerevisiae does not express any xylose-specific transporters. To enhance the xylose uptake of S. cerevisiae, directed evolution of the Gal2 transporter was performed. Three rounds of error-prone PCR were used to generate mutants with improved xylose-transport characteristics. After developing a fast and reliable high-throughput screening assay based on flow cytometry, eight mutants were obtained showing an improved uptake of xylose compared to wild-type Gal2 out of 41 200 single yeast cells. Gal2 variant 2·1 harbouring five amino acid substitutions showed an increased affinity towards xylose with a faster overall sugar metabolism of glucose and xylose. Another Gal2 variant 3·1 carrying an additional amino acid substitution revealed an impaired growth on glucose but not on xylose. Random mutagenesis of the S. cerevisiae Gal2 led to an increased xylose uptake capacity and decreased glucose affinity, allowing improved co-consumption. Random mutagenesis is a powerful tool to evolve sugar transporters like Gal2 towards co-consumption of new substrates. Using a high-throughput screening system based on flow-through cytometry, various mutants were identified with improved xylose-transport characteristics. The Gal2 variants in this work are a promising starting point for further engineering to improve xylose uptake from mixed sugars in biomass.

Directed evolution of Bacillus licheniformis lipase for improvement of thermostability

Lipases catalyze the hydrolysis of carboxylic acid esters and owing to their vast substrate specificity, they have many industrial applications. Due to the demand of thermostable lipases in industrial applications, we have enhanced the thermostability of lipase from Bacillus licheniformis RSP-09. The thermostable mutant lipases of Bacillus licheniformis RSP-09 were isolated following two rounds of directed evolution using error-prone PCR. The best mutant lipases obtained after first and second round of error-prone PCR were purified and characterized. The mutant lipases showed increased thermostability and retained catalytic function. The best mutant lipase (eP-231-51) showed 13.5-fold increase in percentage thermal stability (% remaining activity after incubation of purified enzyme at 60°C for 1h) than wild-type lipase. Also, this mutant lipase (ep-231-51) showed 30% improved catalytic efficiency compared with the wild-type which is due to significant decrease in Km and marginal increase in kcat. In addition, the thermostable mutant lipases have shown resistance to hydrophobic organic solvents. The role of mutations in the best mutant lipases of second round i.e. eP-231-51 (Asp72Gly, Asp61Gly, Tyr129His, and Thr101Pro) and eP-231-137 (Leu49Arg, Thr101Pro, Asp72Gly), that led to thermostability have been postulated after the comparison of molecular models of wild-type and mutated enzymes.

Engineering of Family-5 Glycoside Hydrolase (Cel5A) from an Uncultured Bacterium for Efficient Hydrolysis of Cellulosic Substrates

Cel5A, an endoglucanase, was derived from the metagenomic library of vermicompost. The deduced amino acid sequence of Cel5A shows high sequence homology with family-5 glycoside hydrolases, which contain a single catalytic domain but no distinct cellulose-binding domain. Random mutagenesis and cellulose-binding module (CBM) fusion approaches were successfully applied to obtain properties required for cellulose hydrolysis. After two rounds of error-prone PCR and screening of 3,000 mutants, amino acid substitutions were identified at various positions in thermotolerant mutants. The most heat-tolerant mutant, Cel5A_2R2, showed a 7-fold increase in thermostability. To enhance the affinity and hydrolytic activity of Cel5A on cellulose substrates, the family-6 CBM from Saccharophagus degradans was fused to the C-terminus of the Cel5A_2R2 mutant using overlap PCR. The Cel5A_2R2-CBM6 fusion protein showed 7-fold higher activity than the native Cel5A on Avicel and filter paper. Cellobiose was a major product obtained from the hydrolysis of cellulosic substrates by the fusion enzyme, which was identified by using thin layer chromatography analysis.

Hydroxylation of non-substituted polycyclic aromatic hydrocarbons by cytochrome P450 BM3 engineered by directed evolution

Chrysene and pyrene are known toxic compounds recalcitrant to biodegradation. Here directed evolution allowed us to identify two new mutants of cytochrome P450 BM3 that are able to hydroxylate both compounds. Random mutagenesis has been used to generate libraries of mutants of P450 BM3 active toward polycyclic aromatic hydrocarbons (PAHs) PAHs. After two rounds of error-prone PCR and backcross with parental DNA, three mutants were identified for improved activity toward pyrene and for the first time a new activity toward chrysene in comparison to the wild type enzyme. The mutants show higher affinity and coupling efficiency for chrysene with faster rates of product formation compared to the wild type. Furthermore, the mutants are able to hydroxylate chrysene in different positions, producing four metabolites, 1-, 3-, 4-, and 6-hydroxychrysene, and to hydroxylate pyrene to 1-hydroxypyrene.The majority of the mutation sites are found to be far from the active site, demonstrating the power of directed evolution in identifying mutations difficult to predict with a rational design approach.The different product profiles obtained for the different P450 BM3 mutants indicate that substrate orientation in the catalytic pocket of the protein can be modified by protein engineering. The mutants can be used for metabolic engineering for safe and cost-effective sustainable production of hydroxylated PAHs for industrial purposes as well as for the assessment of their carcinogenic activity in mammals.

Enhanced thermostability of a Rhizopus chinensis lipase by in vivo recombination in Pichia pastoris

BackgroundLipase from Rhizopus chinensis is a versatile biocatalyst for various bioconversions and has been expressed at high-level in Pichia pastoris. However, the use of R. chinensis lipase in industrial applications is restricted by its low thermostability. Directed evolution has been proven to be a powerful and efficient protein engineering tool for improvement of biocatalysts. The present work describes improvement of the thermostability of R. chinensis lipase by directed evolution using P. pastoris as the host.ResultsAn efficient, fast and highly simplified method was developed to create a mutant gene library in P. pastoris based on in vivo recombination, whose recombination efficiency could reach 2.3 × 105 /μg DNA. The thermostability of r27RCL was improved significantly by two rounds of error-prone PCR and two rounds of DNA shuffling in P. pastoris. The S4-3 variant was found to be the most thermostable lipase, under the conditions tested. Compared with the parent, the optimum temperature of S4-3 was two degrees higher, Tm was 22 degrees higher and half-lives at 60°C and 65°C were 46- and 23- times longer. Moreover, the catalytic efficiency kcat/Km of S4-3 was comparable to the parent. Stabilizing mutations probably increased thermostability by increasing the hydrophilicity and polarity of the protein surface and creating hydrophobic contacts inside the protein.ConclusionsP. pastoris was shown to be a valuable cell factory to improve thermostability of enzymes by directed evolution and it also could be used for improving other properties of enzymes. In this study, by using P. pastoris as a host to build mutant pool, we succeeded in obtaining a thermostable variant S4-3 without compromising enzyme activity and making it a highly promising candidate for future applications at high temperatures.

Improving the decolorization for textile dyes of a metagenome-derived alkaline laccase by directed evolution

To obtain better performing laccases for textile dyes decolorization, random mutagenesis of Lac591, a metagenome-derived alkaline laccase, was carried out. After three rounds of error-prone PCR and high-throughput screening by assaying enzymatic activity toward the phenolic substrate 2,6-dimethoxyphenol (2,6-DMP), a mutant (Lac3T93) with remarkably improved enzymatic activity was obtained. Sequence analysis revealed that four amino acid substitutions (N40S, V55A, F62L, and E316V) were accumulated in the Lac3T93. Compared to the wild-type enzyme, the specific activity of Lac3T93 toward 2,6-DMP was increased to 4.8-fold (61.22 U/mg), and its optimal temperature and pH were changed to 60°C and 8.0 from 55°C and 7.5 of the wild-type enzyme, respectively. Furthermore, the degradation ability of Lac3T93 for textile dyes was investigated, and the new variant represented improved decolorization percentage for four industrial dyes with complex phenyl structure (Basic Blue 3, Methylene Blue, Bromophenol Blue, and Crystal Violet) and higher decolorization efficiency for Indigo Carmine than that of the parent enzyme. Furthermore, the decolorization percentage of Lac3T93 for five dyes in the absence of hydroxybenzotrizole (HBT) is clearly higher than those of the wild-type enzyme with 1 mM HBT, and HBT can further improve its decolorization ability.

Directed evolution of a thermophilic endoglucanase (Cel5A) into highly active Cel5A variants with an expanded temperature profile

Cel5A is a highly active endoglucanase from Thermoanaerobacter tengcongensis MB4, displaying an optimal temperature range between 75 and 80 °C. After three rounds of error-prone PCR and screening of 4700 mutants, five variants of Cel5A with improved activities were identified by Congo Red based screening method. Compared with the wild type, the best variants 3F6 and C3-13 display 135 ± 6% and 193 ± 8% of the wild type specific activity for the substrate carboxymethyl cellulose (CMC), besides improvements in the relative expression level in Escherichia coli system. Remarkable are especially the improvements in activities at reduced temperatures (50% of maximum activity at 50 °C and about 45 °C respectively, while 65 °C for the wild type). Molecular Dynamics simulations performed on the 3F6 and C3-13 variants show a decreased number of intra-Cel5A hydrogen bonds compared to the wild type, implying a more flexible protein skeleton which correlates well to the higher catalytic activity at lower temperatures. To investigate functions of each individual amino acid position site-directed (saturation) mutagenesis were generated and screened. Amino acid positions Val249 and Ile321 were found to be crucial for improving activity and residue Ile13 (encoded by rare codon AUA) yields an improved expression level in E. coli.