Rotational Distributions Research Articles

On the Origin of the Split Main Sequences of the Young Massive Cluster NGC 1856

The detection of split main sequences (MSs) associated with young clusters (≲600 Myr) has attracted a lot of attention. A prevailing scenario is that a bimodality of stellar rotation distribution drives the bifurcation of the MS. Nevertheless, the origin of the stellar rotation dichotomy remains unclear. Hypotheses involving tidally locked binaries or blue straggler stars (BSSs) have been proposed to explain the observed split MSs. This work examines if the long-term dynamical evolution of star clusters can produce the observed split MSs, through high-performance N-body simulation. For example, the young massive cluster NGC 1856 exhibits an apparent MS bifurcation. Our simulation reports that at the age of NGC 1856, tidally locked binaries are fully mixed with single stars. This is consistent with the observation that there is no significant spatial difference between blue MS and red MS stars. However, we find that only high-mass-ratio binaries can evolve to the tidally locked phase at the age of the NGC 1856. These tidally locked binaries will populate a much redder sequence than the MS of single stars rather than a blue MS, which is inconsistent with the hypothesis. The number of tidally locked binaries cannot account for the observation. Our simulation shows that BSSs produced by binary interactions do populate in the blue periphery as shown in a color–magnitude diagram, and their spatial distribution shows a similar pattern of single stars. However, the number of BSSs does not fit the observation.

What governs the spin distribution of very young < 1 Myr low-mass stars

Context. The origin of the stellar spin distribution at young ages is still unclear. Even in very young clusters (∼1 Myr), a significant spread is observed in rotational periods ranging from ≲1 to ∼10 days. Aims. We study the parameters that might govern the spin distribution of low-mass stars (≲1.0 M⊙) during the first million years of their evolution. Methods. We compute the evolution and rotational periods of young stars, using the MESA code, starting from a stellar seed, and take protostellar accretion, stellar winds, and magnetic star–disk interaction into account. Furthermore, we add a certain fraction of the energy of accreted material into the stellar interior as additional heat and combine the resulting effects on stellar evolution with the stellar spin model. Results. For different combinations of parameters, stellar periods at an age of 1 Myr range between 0.6 days and 12.9 days. Thus, during the relatively short time period of 1 Myr, a significant amount of stellar angular momentum can already be removed by the interaction between the star and its accretion disk. The amount of additional heat added into the stellar interior, the accretion history, and the presence of a disk and stellar winds have the strongest impact on the stellar spin evolution during the first million years. The slowest stellar rotations result from a combination of strong magnetic fields, a large amount of additional heat, and effective winds. The fastest rotators combine weak magnetic fields and ineffective winds or result from a small amount of additional heat added to the star. Scenarios that could lead to such configurations are discussed. Different initial rotation periods of the stellar seed, on the other hand, quickly converge and do not affect the stellar period at all. Conclusions. Our model matches up to 90% of the observed rotation periods in six young clusters (≲3 Myr). Based on these intriguing results, we were motivated to combine our model with a hydrodynamic disk evolution code to self-consistently include several important aspects, such as episodic accretion events, magnetic disk winds, and internal and external photoevaporation. This combined model could replace the widely used disk-locking model during the lifetime of the accretion disk, and could provide valuable insights into the origin of the rotational period distribution of young clusters.

Seismic response of linked column steel braced frame with mechanical springs

Linked column frame (LCF) is a new resilient structure. However, previous studies have shown that both the plastic rotation and plastic hinge distribution of link beams in LCF system are unsatisfactory, which significantly affect the seismic performance. To expand the plastic deformation and optimize the plastic hinge distribution, an uplifted column foot with springs is introduced. A 1:3 scale pseudo-static test and numerical analysis were conducted to evaluate the hysteresis performance of LCF system with springs, specifically the frame lateral deformation, the shear deformation of link beams and yielding mechanism. Moreover, the virtual work principle was applied to analyze the lateral bearing capacity theoretically. The result shows that when the frame was subjected to lateral forces, axial deformation was observed in the springs, thus releasing the vertical restraint of columns, eventually the link beams are motivated to develop inelastic deformation and the frame rotated, similar to a rocking structure. Additionally, compared to the numerical simulation and experiment results, the relative errors were analyzed and the theoretical bearing capacity was modified. In conclusion, the proposed foot configuration can significantly improve the energy dissipation capacity of LCF system. The shear deformations of link beams in different storeys are relatively uniform along the frame height.

Quasi-static experimental study on seismic performance of exterior shear key with different failure modes

The shear key with horizontal failure mode manifests secondary stiffness-strengthening capacity comparing to the diagonal and slide shear modes. It is more suitable for protecting bridges that sustain multiple hazard actions. However, the seismic performance of shear keys with horizontal failure mode has seldom been addressed. This study designed and manufactured ten RC exterior shear key models involving 1:3 geometrical scaling to achieve three failure modes with specific reinforcement layouts. A quasi-static experiment was performed to investigate the seismic performance of shear keys, including crack observation, force–displacement relationship, rotation and stress distribution characteristics. The experiment results indicate that the failure mode depends on the proportion of reinforcement capacity, and can affect the maximum resistance of shear keys. The shear key with horizontal failure exhibits apparent secondary stiffness strengthening characteristics, whereas the diagonal and sliding failure modes suffer persistent reduction under large deformations. Furthermore, the diagonal shear key exhibits the highest residual capacity under severe damage. The measured data are compared with the existing analytical models in terms of both peak capacity and envelope curves, showing the models are more applicable to diagonal failure shear key than the others.

The spread of rhizoctoniosis in potato plantings in the conditions of the North-West of the Russian Federation with a heterogeneous content of nutrients in the soil

Rhizoctoniosis is one of the most common and harmful diseases of potatoes in the North-West of Russia. The degree of its manifestation depends on many factors, including the content of basic nutrients in the soil. In the Leningrad region the effect of prolonged application of organic and mineral fertilizers on the degree and nature of the manifestation of rhizoctoniosis was studied in potato variety Meteor in forage and field crop rotations. By the results of the detailed accounting carried out in 2022 including observation of all potato plantings (43406 in total) it was determined that rhizoctoniosis damage had random distribution character in field crop rotation and focal distribution in forage crop rotation. This conclusion was confirmed by respective coefficients of variation (79 and 87 %) and aggregation (1.0 and 1.5). Spatial heterogeneity of plants damaged by rhizoctoniosis was visualized on digital maps compiled with GIS AFI and Surfer 11 while grouping the data into elementary sections. There was sufficient influence of cultivation and fertilization of different levels on rhizoctoniosis spread. The influence of cultivation was weak and statistically significant only in forage crop rotation, where there was an increase of rhizoctoniosis damage of potato plants (by 1.7-2.5 times compared to low cultivated soil). Under mineral fertilizers application there was a decrease of rhizoctoniosis damage of potato plants both in field crop rotation (by 1.1-1.7 times compared to variant without fertilizers application), and in forage crop rotation (by 1.1-1.3 times). Complex influence of soil cultivation and fertilization of potato plantings caused a decrease of rhizoctoniosis damage of potato tubers by 1.9 and 2.0 times in field and forage crop rotations, respectively.

Configuration-dependent dynamics of non-spherical particles in a gas–solid fluidized bed

Configuration-dependent dynamics of non-spherical particles are investigated experimentally in a quasi-two-dimensional gas–solid fluidized bed. We show that the vertical velocity profiles are sensitive to the aspect ratio at low gas velocity, but not sensitive at high gas velocity. The velocity distribution, especially the rotational velocity distribution, deviates from the Maxwellian distribution. The joint probability density distribution of vertical and rotational velocity is asymmetric. We identify two high-probability particle configurations, two particles in a parallel or vertical arrangement, by calculating the radial distribution function, nematic correlation function and coordination number. We further explain the cause of this order appearance through entropy theory. By comparing the drag force of the particle configurations at various angles and Re, we demonstrate that it is necessary to put forward the configuration-dependent drag force for non-spherical particle fluidization.

Non-equilibrium dynamics at the gas-liquid interface: State-resolved studies of NO evaporation from a benzyl alcohol liquid microjet.

First measurements of internal quantum-state distributions for nitric oxide (NO) evaporating from liquid benzyl alcohol are presented over a broad range of temperatures, performed by liquid-microjet techniques in an essentially collision-free regime, with rotational/spin-orbit populations in the 2Π1/2,3/2 manifolds measured by laser-induced fluorescence. The observed rotational distributions exhibit highly linear (i.e., thermal) Boltzmann plots but notably reflect rotational temperatures (Trot) as much as 30K lower than the liquid temperature (Tjet). A comparable lack of equilibrium behavior is also noted in the electronic degrees of freedom but with populations corresponding to spin-orbit temperatures (TSO) consistently higher than Trot by ∼15K. These results unambiguously demonstrate evaporation into a non-equilibrium distribution, which, by detailed-balance considerations, predict quantum-state-dependent sticking coefficients for incident collisions of NO at the gas-liquid interface. Comparison and parallels with previous experimental studies of NO thermal desorption and molecular-beam scattering in other systems are discussed, which suggests the emergence of a self-consistent picture for the non-equilibrium dynamics.

Improvement of Faraday Rotation and Its Application in Preconditioned Single-Wire Z-Pinch Plasma

Magnetic field measurement in Z-pinch plasma has drawn considerable interest because it is a key problem in the research of dynamic behaviors and the coupling of magnetic field and plasma. In this study, the measurement sensitivity of the rotation angle in Z-pinch plasma was improved by considering the second polarization effect caused by optical elements. The magnetic field distribution of preconditioned single-wire Z-pinch plasma was determined by this method. The Faraday rotation of the 1064-nm probe laser was measured by the beam-splitting polarization method when the plasma acted as a Faraday medium. A second polarization effect on the rotation angle was realized by taking the different transmittances and reflectivities of the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$p$</tex-math> </inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$s$</tex-math> </inline-formula> components of the beam splitters into account. This configuration doubled the sensitivity of the Faraday rotation measurement. The diagnostic errors produced by the techniques and data processing were quantified. The early stage of the preconditioned imploding plasma was monitored, and the distributions of areal electron density, Faraday rotation, and magnetic field were measured. The experimental results demonstrated that the current distribution can be divided into three parts by two dense shells. The majority of the current was distributed outside the dense shell which existed inside the coronal plasma. In addition, only a small amount of current was distributed in the wire core.

Macroscopic Spatio-Temporal Patterns of Localized Plastic Flow Development under Tension of Fe-Cr-Ni Alloys

This study examines the patterns of macroscopic inhomogeneity and localization of plastic flow in Fe-Cr-Ni polycrystals subjected to uniaxial tension. By varying the test temperature, the deformation curves can be altered, allowing us to explore the behavior of the material under different conditions. The stress-strain diagrams obtained from the samples reveal the areas of elastic deformation, plastic flow, and fracture. To experimentally study plastic flow, we used speckle photography to accurately reconstruct the displacement vector fields and calculate the components of the plastic distortion tensor. The results showed that plastic flow is localized at all stages of the process for test temperatures of+65, +24, and -60 °C. The forms oflocalization are entirely determined by the dependence of the strain hardening coefficient on the deformation during the relevant stage of the process. An analysis of the spatial distributions of local shifts and local rotations was conducted. We observed spatially periodic structures that can be interpreted as autowave processes and explained in terms of the concept of self-organization of the plastic flow process.

Rock Wedge Stability Analysis by a Level III Reliability Method

In fractured rock masses, discontinuities control the mechanical response of rock slopes. They even define the geometry of a potential failure, known a kinematically controlled failure. Hence, a proper characterization and description are needed to assess their stability. Accordingly, in this work, a reliability assessment of rock wedges' stability was performed by a Monte Carlo simulation. The orientation of discontinuities was modeled as a random variable that follows the rotationally symmetric Fisher distribution. We developed an algorithm to define the modes of failure based on the orientation of planes, which was articulated within a methodology to compute the factor of safety of rock wedges explicitly. The algorithm systematically defines a set-up of joint planes. Then it verifies the relative location of the slope orientation on that set-up, which is related to the mode of failure of the rock wedge. The proposed algorithm was validated by comparison against commercial software; both yielded the same results. Besides, the probability of failure and the factor of safety probability function of removable wedges were computed for different concentration parameters. Reliability assessment showed the importance of properly characterizing the variability of joint orientation since the concentration highly influences the computed probability of failure. In addition, a proper definition of removable wedges by kinematic analysis is required before computing the factor of safety because many combinations of planes do not lead to unstable wedges, which reduces the probability of failure. Otherwise, it is overestimated. Finally, we recommend further work on rock wedge reliability assessment involving rotational nonsymmetric distribution.

Torque-Transferring Characteristics of Offshore Tetrapod Piled Jacket Foundations in Dense Sand

Tetrapod piled jacket (TPJ) foundations that support offshore wind turbines (OWTs) tend to be subjected to significant torque that is caused by eccentric loading from wind, waves, or accidental vessel impact. This paper presented a comprehensive three-dimensional (3D) numerical analysis to investigate TPJs performance under torsional loading, which considered the distribution of local torque and rotation over pile shafts and the underlying torsional load transfer mechanism. A modified Mohr–Coulomb (MMC) model for dense sands was implemented in ABAQUS/Standard that captured the evolution of the friction and dilation (ψ) angles against the accumulated plastic shear strain (γp). The results showed that the torque that was imposed at the head of a TPJ foundation could trigger soil reactions of torsional resistance (τs) and horizontal force (Hp) in individual piles; higher pile spacing-to-diameter ratios (S/D) mitigated the influence of torsional loads. A pressure-dependent torsional load transfer model was proposed that considered the effects of the pile–sand relative stiffness and sand’s relative density (DR). The model could be employed to predict TPJs response under torsional loading and improve their practical design.

Biomechanical Response of Four Roussouly's Sagittal Alignment Lumbar to Degeneration of Different Parts of Intervertebral Disc: Finite Element Model Analysis

BackgroundSpinal degeneration with age is commonly accompanied by excessive kyphosis and low-back pain, however, little is known about the connection between lumbar sagittal morphology and its degenerative biomechanics. This study investigates the biomechanical response of four Roussouly's sagittal alignment lumbar to degeneration of various parts of the intervertebral disc (IVD) based on threedimensional finite element (FE) models. MethodsUsing Roussouly's type parametric FE models, material properties of the degenerate nucleus populous (NP), annulus fibrosis matrix (AFM), and collagen fibers were assumed to be half of the intact IVD. A follower preload and vertical force were applied to simulate physical standing posture. Resultsthe reduced strength of the NP and AFM led to the increase of lumbar anteflexion, while the fiber mechanical properties have little effect on it. When facing IVD degeneration, Type 1 lumbar showed increased intradiscal pressures (IDPs) and fiber stress at the L1-2 and L4-S1 segments. Type 2 lumbar exhibited the highest lumbar anteflexion and pelvic rearward rotation, as well as increased IDPs among the models. Type 3 lumbar had the best biomechanical stability. Type 4 lumbar showed the higher AFM stress but the lower IDPs among the four types. ConclusionsIVD degeneration generated sagittal imbalance by increasing lumbar anteflexion movement (i.e., loss lordosis) and pelvic rearback rotation. The biomechanical response of the four Roussouly's lumbar types differed in intervertebral rotation and stress distribution.

Velocity-Selected Rotational State Distributions of Nitric Oxide Scattered off Graphene Revealed by Surface-Velocity Map Imaging.

We report velocity-dependent internal energy distributions of nitric oxide molecules, NO, scattered off graphene supported on gold to further explore the dynamics of the collision process between NO radicals and graphene. These experiments were performed by directing a molecular beam of NO onto graphene in a surface-velocity map imaging setup, which allowed us to record internal energy distributions of the NO radicals as a function of their velocity. We do not observe bond formation but (1) major contributions from direct inelastic scattering and (2) a smaller trapping-desorption component where some physisorbed NO molecules have residence times on the order of microseconds. This is in agreement with our classical molecular dynamics simulations which also observe a small proportion of two- and multi-bounce collisions events but likewise a small proportion of NO radicals trapped at the surface for the entire length of the molecular dynamics simulations (a few picoseconds). Despite a collision energy of 0.31 eV, which would be sufficient to populate NO(v = 1), we do not detect vibrationally excited nitric oxide.

Validation of Bengali version of Edmonton Symptom Assessment Scale-Revised (ESAS-r Bengali): A multidimensional symptom assessment tool for patients with advanced incurable diseases receiving palliative care.

Routine symptom assessment represents the cornerstone of symptom management of patients with advanced incurable diseases in palliative care. At present, there is no validated tool to assess symptoms among the Bengali-speaking population with incurable diseases. The aim of the study is to translate, culturally adapt, and validate the Edmonton Symptom Assessment Scale (Revised) into Bengali language. The study was conducted in two phases. Forward and backward translations of the English version of the Edmonton Symptom Assessment Scale (Revised) into Bengali were conducted by four independent translators. After obtaining reviews from an expert committee, pre-testing and cognitive debriefing the Bengali version of the tool was finalized. The final validation was conducted among 110 patients admitted to the Palliative Medicine Department of Bangabandhu Sheikh Mujib Medical University, Dhaka, Bangladesh. Validity (content, face, and construct validity) and reliability (internal consistency) were assessed in the final validation phase. All participants responded to all items. Seventy percent of the participants completely understood all questions but 30% had difficulty with three questions. The expert committee expressed their satisfaction regarding the face and content validity of the questionnaire. The Bengali version also had high reliability (α = 0.862). Principal component analysis with the distribution of varimax rotation of Edmonton Symptom Assessment Scale (Revised) Bengali ranged from 0.41 to 0.83. After the translation and cross-cultural adaptation, the Bengali version of the Edmonton Symptom Assessment Scale (Revised) achieved good levels of validity and reliability. It can be used as a symptom assessment tool for Bengali speaking population receiving palliative care.

Theoretical study on photodissociation dynamics of vibrational excited states of H2S in the first absorption band

The photodissociation quantum dynamics for the first absorption band of H2S in different initial vibrational states have been investigated using Chebyshev real wave packet method. Because of the difference of the wave functions for the initial vibrational states, the calculated absorption spectra and the distributions of vibrational and rotational state of the products display different dynamic characteristics. The width and peak position of the absorption spectra for initial stretching excited states (1,0,0) and (0,0,1) are different from that of the vibrational ground state, while the (0,1,0) vibrational state has two almost equally high peaks in its absorption spectrum because of the change of wave function in angular coordinate. The product vibrational state distribution for (0,1,0) initial state weakly depends on the excitation energy and is dominated by the products of v=0, but SH(v=1) fragment is dominant at lower energy for (1,0,0) and (0,0,1) vibrational states. The rotational state distributions of products are very cold with the peak at j=l for these four states and weakly depend on the total energy. Besides, the rotational state distribution from (0,1,0) vibrational state displays strong oscillation, and its anisotropic parameter with rotational quantum numbers is also different from that of the other three vibrational states.

Nonadiabatic quantum dynamics of the charge transfer reaction H+ + NO(X2Π) → H + NO+(X1Σ+).

Nonadiabatic quantum dynamics of the charge transfer (CT) reaction H+ + NO(X2Π) → H + NO+(X1Σ+) is investigated on a new diabatic potential energy matrix (PEM) including the 12A' and 22A' states of HNO+/HON+ at the multireference configuration interaction level with Davidson correction using a large basis set. The diabatization of the two coupled states was achieved by the adiabatic-to-diabatic transformation with a mixing angle and the final diabatic PEM was obtained by fitting each matrix element separately using a three-dimensional cubic spline interpolation including more than 22 000 ab initio points. The reaction was found to be dominated by the resonances supported by the double well associated with HNO+ and HON+ species, manifested by the oscillatory structures in the reaction probabilities and product rotational distributions. The product vibrational states were highly excited due to the large exothermicity of the reaction. Consistent with the complex-forming mechanism, the differential cross sections (DCSs) were found to be dominated by the forward and backward scatterings. A clear forward bias in the vibrational state resolved DCSs suggests that the non-statistical behavior of the reaction mainly comes from the low vibrational states of the product. In addition, the rate constants of the reaction in the temperature range from 50 to 500 K were computed for the first time and found to be in fairly good agreement with the available experimental results at 300 K. In particular, compared to other reactions involving neutral species in this system including N, O, and H atoms, such a CT reaction was found to be much more reactive, which has rate constants more than thirty times larger.

Analytical moment-curvature solutions for generalized textile-reinforced concrete sections

A piecewise linear parametric constitutive model of elastic-plastic-hardening in tension and elastic-plastic in compression is used to develop closed-form solutions for flexural moment-curvature of generalized sections. Brittle matrix composite such as Textile Reinforced Concrete (TRC) is homogenized using three zones of elastic, distributed cracking, and tension stiffening up to the maximum tensile strength. Linear segments of the tensile and compressive constitutive responses are integrated for various states of strain and extended to geometrical structural shapes such as steel W-, T-, and C- sections. The closed-form moment-curvature response is obtained using two independent variables of strain distribution and neutral axis location and extended to obtain the stress distribution, curvature, rotation, and deflection profile of statically determinate load cases using an input strain. The solutions for serviceability-based criteria and limit state parameters such as curvature, rotation, and deflection distribution as a function of the applied load can be obtained. The generalized parametric solutions are applied to the elastic-plastic flexural response of quasi-brittle or ductile beams of structural steel with unique cross-sectional geometries. Case studies of the correlation of tensile and flexural tests of TRC with variables such as types and direction of the weave, number of textile layers, and section geometry are validated. The parametric nature of the formulation offers computational efficiency for applications that address material and shape optimization, as well as serviceability-based flexural design using different limit states.

Diagnostics of a nanosecond atmospheric plasma jet. Electron and ro-vibrational excitation dynamics

Atmospheric repetitive He discharge with 10 ns current peak width and V s−1 voltage front rise working in jet geometry is studied. The first part of the study is devoted to electrical and optical discharge characterization including voltage-current behavior, emission dynamics, as well as ro-vibrational dynamics of N2, N and OH molecules. It is found that He atoms get excited at the very early stage, as a result of ionization wave formation. This process follows by excitation of O, N2 and N. It is also shown that a rather small (0.1%–1%) air admixtures facilitate gas breakdown, as revealed by shortening of the discharge current risetime. The rotational excitation of N always overtakes He excitation by about 5 ns, with rotational temperature peaking at about 650 K and decaying afterwards, whereas rotational temperature of N2 always remains constant equal to about 300 K. This value is associated with gas kinetic temperature since the electron-rotational (e-R) excitation process is too slow, so it cannot be activated during the plasma phase and no additional change in rotational excitation of N2 happens. Nitrogen molecules remain vibrationally excited in the discharge, post-discharge and jet areas after the plasma pulse which is likely a result of ionization wave propagation. Upon water vapor injection the apparent OH rotational distributions reveal double Boltzmann slope representing thermalized and non-thermalized OH groups. Rotational temperature of the thermalized group correlates with the one of N showing, however, much longer relaxation time, whereas for the non-thermalized group it remains above 1 eV at all conditions. The obtained results confirm that the studied ns- discharge is a good candidate for temperature-sensitive applications, such as the bio-sample treatment. Further analysis related to the ionization waves, electron density and electric field behavior is undertaken in the second part.

Coherent N2 + emission mediated by coherent Raman scattering for gas-phase thermometry.

We report on the generation of coherent emission from femtosecond (fs) laser-induced filaments mediated by ultrabroadband coherent Raman scattering (CRS), and we investigate its application for high-resolution gas-phase thermometry. Broadband 35-fs, 800-nm pump pulses generate the filament through photoionization of the N2 molecules, while narrowband picosecond (ps) pulses at 400 nm seed the fluorescent plasma medium via generation of an ultrabroadband CRS signal, resulting in a narrowband and highly spatiotemporally coherent emission at 428 nm. This emission satisfies the phase-matching for the crossed pump-probe beams geometry, and its polarization follows the CRS signal polarization. We perform spectroscopy on the coherent N2 + signal to investigate the rotational energy distribution of the N2 + ions in the excited B2Σu + electronic state and demonstrate that the ionization mechanism of the N2 molecules preserves the original Boltzmann distribution to within the experimental conditions tested.

Parametric Analysis of SV Mode Shear Waves in Transversely Isotropic Materials Using Ultrasonic Rotational 3-D SWEI.

Ultrasonic rotational 3-D shear wave elasticity imaging (SWEI) has been used to induce and evaluate multiple shear wave modes, including both the shear horizontal (SH) and shear vertical (SV) modes in in vivo muscle. Observations of both the SH and SV modes allow the muscle to be characterized as an elastic, incompressible, transversely isotropic (ITI) material with three parameters: the longitudinal shear modulus μL , the transverse shear modulus μT , and the tensile anisotropy χE . Measurement of the SV wave is necessary to characterize χE , but the factors that influence SV mode generation and characterization with ultrasonic SWEI are complicated. This work uses Green's function (GF) simulations to perform a parametric analysis to determine the optimal interrogation parameters to facilitate visualization and quantification of SV mode shear waves in muscle. We evaluate the impact of five factors: μL , μT , χE , fiber tilt angle [Formula: see text], and F-number of the push geometry on SV mode speed, amplitude, and rotational distribution. These analyses demonstrate that the following hold: 1) as μL increases, SV waves decrease in amplitude so are more difficult to measure in SWEI imaging; 2) as μT increases, the SV wave speeds increase; 3) as χE increases, the SV waves increase in speed and separate from the SH waves; 4) as fiber tilt angle [Formula: see text] increases, the measurable SV waves remain approximately the same speed, but change in strength and in rotational distribution; and 5) as the push beam geometry changes with F-number, the measurable SV waves remain approximately the same speed, but change in strength and rotational distribution. While specific SV mode speeds depend on the combinations of all parameters considered, measurable SV waves can be generated and characterized across the range of parameters considered. To maximize measurable SV waves separate from the SH waves, it is recommended to use an F/1 push geometry and [Formula: see text].