Rotation Correction Research Articles

Impact of nuclear rotation corrections on alpha decay half-lives of superheavy nuclei within 98 ≤ Z ≤ 120

The influence of nuclear rotation on the decay half-lives of superheavy nuclei within the range 98≤Z≤120 is investigated using the axially deformed relativistic Hartree-Bogoliubov theory in the continuum (DRHBc) with the PC-PK1 parameter set. The deduced DRHBc decay energies (with and without the rotation effect) are compared with those calculated from the macroscopic-microscopic WS4 and the available experimental binding energies. Six semi-empirical formulae, such as the Viola-Seaborg formula (VSS), the modified Brown formula (mB1), the semi-empirical relationship based on fission theory (SemFIS2), the Royer formula (R), the Wang formula (Wang) and the modified YQZR formula (MYQZR) are employed to estimate the half-lives of α decay. Among these formulae, the half-live predictions of SemFIS2 are found to gradually deviate from the systematic trend beyond Nd=184, showing that the probability of undergoing spontaneous fission is less feasible beyond this point. A minimum is observed at Nd=184, reflecting its neutron shell closure for the mass region considered on the nuclear chart. The results further indicate that, for 98≤Z≤104, the predictions of all semi-empirical formulae are more closely matched to the available experimental data when the rotation effect is taken into account. However, we have demonstrated that the effect of nuclear rotation gradually reduces as the atomic nucleus becomes heavier.

Verification and Validation of the Spalart Allmaras Model with Rotation and Curvature Correction for Incompressible and Compressbile Flows

The Spalart-Allmaras turbulence model is the model which gets the highest technological readiness level in the NASA turbulence model resource home page. The model is widely used to predict external incompressible and compressbile flows. Different corrections to this model incorporating additional physical effects are presented on the same home page. Unfortunately none of these corrections are available in the official OpenFOAM version. Furthermore, no publicly available repository which contains the full set of corrections suggested by Shur et al. [1] to account for curvature and rotation effects was found. In this technical note, the rotation and streamline curvature correction is incorporated into the Spalart-Allmaras model in order to overcome this limitation. The same equations as suggested in Shur et al. [1] are implemented and verified by means of the incompressible flow in a rotating channel, a 2D bump flow in a channel and a channel flow exhibiting a U-turn. Regarding the rotating channel flow and the flow in a U-turn some quantitative differences remain with respect to the results of Shur et al. [1]. For the rotating channel flow, a careful consistency check with respect to the analytical relations leading to the computation of the factor multiplied with the production term was made. No inconsistencies in the implementation where found. Unfortunately the exact reason for the differences between the present results compared to the computations of Shur et al. [1], was not found. The interested readers are encouraged to help to clarify these issues. In the fourth test case it is shown that the model predicts a more correct turbulent viscosity distribution in the transonic flow around a delta wing. Applying the streamline and curvature corrections to the Spalart-Allmaras model predicts an earlier vortex breakdown compared to the standard Spalart-Allmaras model for a high angle of attack configuration. The agreement with the reference experiments is much better when using the corrections proposed by Shur et al. [1] to the Spalart-Allmaras compared to the standard Splart-Allmaras model.

Highly efficient ensemble algorithms for computing the Stokes–Darcy equations

In this report we propose two highly efficient ensemble algorithms incorporating the gPAV and the rotational pressure correction methods for computing Stokes-Darcy flow ensembles. All variables are fully decoupled including the three components of the velocity, leading to smaller linear systems to be solved at each time step. Moreover, all ensemble members share the same constant coefficient matrix for which the fast block CG method can be applied for computing the ensemble at one pass at significantly reduced computational cost. We prove the two new ensemble algorithms are unconditionally stable with respect to the modified energy without any constraints on the uncertain parameters or the time steps. We will provide details of implementation and discuss how to efficiently solve the corresponding linear systems. Numerical examples are presented to show the efficiency and effectiveness of the algorithms.

Properties of the jet in M87 revealed by its helical structure imaged with the VLBA at 8 and 15 GHz

ABSTRACT We present full-track high-resolution radio observations of the jet of the galaxy M87 at 8 and 15 GHz. These observations were taken over three consecutive days in 2009 May using the Very Long Baseline Array (VLBA), one antenna of the Very Large Array (VLA), and the Effelsberg 100 m telescope. Our produced images have dynamic ranges exceeding 20 000:1 and resolve linear scales down to approximately 100 Schwarzschild radii, revealing a limb-brightened jet and a faint, steep spectrum counter-jet. We performed jet-to-counter-jet analysis, which helped estimate the physical parameters of the flow. The rich internal structure of the jet is dominated by three helical threads, likely produced by the Kelvin–Helmholtz (KH) instability developing in a supersonic flow with a Mach number of approximately 20 and an enthalpy ratio of around 0.3. We produce a clean imaging bias-corrected 8–15 GHz spectral index image, which shows spectrum flattening in regions of helical thread intersections. This further supports the KH origin of the observed internal structure of the jet. We detect polarized emission in the jet at distances of approximately 20 milliarcseconds from the core and find Faraday rotation which follows a transverse gradient across the jet. We apply Faraday rotation correction to the polarization position angle and find that the position angle changes as a function of distance from the jet axis, which suggests the presence of a helical magnetic field.

Evaluation of a head rest prototype for rotational corrections in three degrees of freedom.

Cranial stereotactic irradiations require accurate reproduction of the planning CT patient position at the time of treatment, including removal of rotational offsets. A device prototype was evaluated for potential clinical use to correct rotational positional offsets in image-guided radiotherapy workflow. Analysis was carried out with a prototype device "RPS head" by gKteso GmbH, rotatable up to 4° in three dimensions by hand wheels. A software tool accounts for the nonrectangular rotation axes and also indicates translational motions to be performed with the standard couch to correct the initial offset and translational shifts introduced by the rotational motion. The accuracy of angular corrections and positioning of an Alderson RANDO head phantom using the prototype device was evaluated for nine treatment plans for cranial targets. Corrections were obtained from cone beam computed tomography (CBCT) imaging. The phantom position was adjusted and the final position was then verified by another CBCT. The long-term stability of the prototype device was evaluated. Attenuation by the device along its three main axes was assessed. A planning study was performed to evaluate if regions of high-density material can be avoided during plan generation. The device enabled the accurate correction of rotational offsets in a clinical setup with a mean residual angular difference of (0.0±0.1)° and a maximum deviation of 0.2°. Translational offsets were less than 1mm. The device was stable over a period of 20 min, not changing the head support plate position by more than (0.7±0.6) mm. The device contains high-density material in the adjustment mechanism and slightly higher density in the support structures. These can be avoided during planning generation maintaining comparable plan quality. The head positioning device can be used to correct rotational offsets in a clinical setting.

ROTATION-GAMMA CORRECTION AUGMENTATION ON CNN-DENSE BLOCK FOR SOIL IMAGE CLASSIFICATION

Soil is a solid-particle that covers the earth's surface. Soils can be classified based their color. The color can be an indication of soil properties and soil conditions. Soil image classification requires high accuracy and caution. CNN works well on image classification, but CNN requires a large amount of data. Augmentation is one technique to overcome data needs like rotation and improving contrast. Rotation is the movement of rotating the image position randomly to various degrees. Gamma Correction is a method to improve image by decreasing or increasing the contrast. The rotation and Gamma Correction on augmentation can increase the amount of training data from 156 to 2500 soil images data. The classification of soil data is not referred to soil taxonomy system such as Entisols and Histosols but it used arbitrary simple classification based on color. Unfortunately, the weakness of the CNN is vanishing and exploded gradients. Another Deep learning that can overcome vanishing and exploded gradients is dense blocks. This study proposes a combination of Augmentation and CNN-Dense block where in the augmentation a combination of rotation and Gamma-correction techniques is used and Soil image classification based on color is used by the CNN-Dense block. The combination method is able to give excellent results, where all performances accuracy, precisions, recall and F1-Score are above 90%. The combination of rotation and Gamma Correction on augmentation and CNN is a robust method to use in soil image classification based on color.

First-Year Experience of IMRT/SBRT Treatments Using a Novel Biology-Guided Radiation Therapy System

This study presents the first-year experience of treating patients using intensity-modulated radiation therapy (IMRT) and stereotactic body radiation therapy (SBRT) with the X1 system, the first biology-guided radiation therapy (BgRT) machine installed in a clinical setting. A total of 78 patients underwent IMRT and SBRT treatments on the X1 system from May 2021 to May 2022. Clinical and technical data, such as treatment sites, number of pre-treatments kVCT scans, beam on time, patient setup time, imaging time per kVCT, and couch shifts after kVCT match, were collected and analyzed. Additionally, daily machine output stability, patient-specific quality assurance (QA) results, machine uptime, and user survey were also documented and reported. The most commonly treated site was the head and neck (63%), followed by the pelvis (23%), thorax (6%), and abdomen (8%). All treatments, except for 5 pelvis patients (6%) who received SBRT treatments for bony metastases, were conventionally fractionated IMRT (CF IMRT). The average number of kVCT scans per fraction is 1.2 ± 0.5 for all treatments. The average beam on time in minutes was 9.2 ± 3.5 for all treatments, 8.4 ± 2.4 for head and neck, 6.7 ± 1.3 for thorax, 10.3 ± 1.6 for abdomen, 11.6 ± 5.1 for CF IMRT pelvis, and 10.8 ± 5.3 for SBRT pelvis. The average patient setup time and imaging time per kVCT was 4.8 ± 2.6 minutes and 4.6 ± 1.5 minutes, respectively. The average couch corrections based on kVCT images were 0.4 ± 4.4 mm, 1.0 ± 4.5 mm, and 1.3 ± 4.3 mm along the x, y, and z direction, respectively; the average couch rotation corrections were 0.1 ± 0.9° for pitch, 0.0 ± 0.9° for roll, and 0.2 ± 1.2° for yaw. The daily machine output was 0.4 ± 1.2% from the baseline. The patient QA had a gamma passing rate of 97.4 ± 2.8%. The machine uptime was 92% of the total treatment time. The kVCT image quality and daily QA process received the highest level of satisfaction, while the treatment workflow for therapists received the lowest level of satisfaction (table 1). At one year after the installation of the X1 system, this study reports successful treatment of 78 patients using IMRT/ SBRT. With the recent FDA clearance of BgRT, our institution is preparing to treat patients using PET-guidance via a new product release, which should address deficiencies in the current IGRT workflow.

A Deep Learning Approach for Arabic Manuscripts Classification.

For centuries, libraries worldwide have preserved ancient manuscripts due to their immense historical and cultural value. However, over time, both natural and human-made factors have led to the degradation of many ancient Arabic manuscripts, causing the loss of significant information, such as authorship, titles, or subjects, rendering them as unknown manuscripts. Although catalog cards attached to these manuscripts might contain some of the missing details, these cards have degraded significantly in quality over the decades within libraries. This paper presents a framework for identifying these unknown ancient Arabic manuscripts by processing the catalog cards associated with them. Given the challenges posed by the degradation of these cards, simple optical character recognition (OCR) is often insufficient. The proposed framework uses deep learning architecture to identify unknown manuscripts within a collection of ancient Arabic documents. This involves locating, extracting, and classifying the text from these catalog cards, along with implementing processes for region-of-interest identification, rotation correction, feature extraction, and classification. The results demonstrate the effectiveness of the proposed method, achieving an accuracy rate of 92.5%, compared to 83.5% with classical image classification and 81.5% with OCR alone.

Perspectives on Effective Long-Term Management of Carbon Stocks in Chernozem under Future Climate Conditions

Arable Chernozems with high SOC contents have the potential to be significant sources of GHGs, and climate change is likely to increase SOC losses, making the issue of carbon sequestration in this region even more important. The prospect of maintaining SOC stock or increasing it by 4‰ annually under planned management practice modifications for the period up to 2090 was evaluated using a long-term experiment on Haplic Chernozem in the Rostov Region, Russia. In this study, we used the RothC model to evaluate SOC dynamics for three treatments with mineral and organic fertilization under two adaptation scenarios vs. business-as-usual scenarios, as well as under two climate change scenarios. The correction of crop rotation and the application of organic fertilizers at high rates are essential tools for maintaining and increasing SOC stocks. These methods can maintain SOC stock at the level of 84–87 Mg∙ha−1 until the middle of the 21st century, as the first half of the century is considered to be the most promising period for the introduction of adaptation measures for the additional accumulation of SOC on Chernozems. Part of the additional accumulated SOC is expected to be lost before 2090.

Second-order rotational velocity correction projection finite element method for unsteady MHD coupled heat equation

Second-order rotational velocity correction projection finite element method for unsteady MHD coupled heat equation

Correction of Tetratorsional Malalignment of the Lower Extremities Improves Patient-Reported Outcomes.

Axial malalignment of the bilateral femurs and tibias, previously known as "miserable" malalignment, now renamed tetratorsional malalignment (TTM), presents with hip and/or knee pain refractory to nonoperative treatment. We sought to investigate whether bilateral rotational osteotomy of the femur and tibia leads to improvement in a deformity-specific patient-reported outcome measure (PROM). A retrospective review of patients who underwent staged rotational correction of the bilateral femur and tibias was performed. Computed tomography (CT) was used to measure the preoperative rotational profile and plan the surgical correction. Stabilization was predominantly with intramedullary nails. The primary outcome measure was the Limb Deformity-modified Scoliosis Research Society (LDSRS) score. Secondary outcomes included change in mechanical limb alignment and complications of the procedure. Sixteen patients (13 female and 3 male) with average age of 23.1 years (range: 15-36 years) underwent 4-segment rotational correction. The averages for femoral and tibial deformity correction were 23.5° (6.2° SD) and 20.9° (5.2° SD), respectively. The total LDSRS score improved from 3.67 (0.3 SD) to 4.39 (0.3 SD) (P = .001). The LDSRS sub-scores for function, pain, and self-image also significantly improved. In patients not undergoing concurrent coronal deformity correction, the limb mechanical axis was not significantly changed. No additional procedures were performed to obtain bone union. Three patients required peroneal nerve decompression following the index procedure, and all neurologic symptoms resolved. This retrospective review suggests that correction of TTM of the lower extremities may lead to improvements in function, pain, and self-image. There were minimal complications and no iatrogenic deformity among 16 patients reviewed. The new diagnosis, TTM, is descriptive of this debilitating condition without communicating a negative patient image.

Republication of "Proximal Rotational Metatarsal Osteotomy for Hallux Valgus (PROMO): Short-term Prospective Case Series With a Novel Technique and Topic Review".

Hallux valgus deformity consists of a lateral deviation of the great toe, metatarsus varus, and pronation of the first metatarsal. Most osteotomies only correct varus, but not the pronation of the metatarsal. Persistent postoperative pronation has been shown to increase deformity recurrence and have worse functional outcomes. The proximal rotational metatarsal osteotomy (PROMO) technique reliably corrects pronation and varus through a stable osteotomy, avoiding fusing any healthy joints. The objective of this research is to show a prospective series of the PROMO technique. Twenty-five patients (30 feet) were operated with the PROMO technique. The sample included 22 women and 3 men, average age 46 years (range 22-59), for a mean prospective follow-up of 1 year (range 9-14 months). Inclusion criteria included symptomatic hallux valgus deformities, absence of severe joint arthritis, or inflammatory arthropathies, with a metatarsal malrotation of 10 degrees or more, with no tarsometatarsal subluxation or arthritis on the anteroposterior or lateral foot radiograph views. The mean preoperative and postoperative Lower Extremity Functional Scale (LEFS) score, metatarsophalangeal angle, intermetatarsal angle, metatarsal malrotation, complications, satisfaction, and recurrence were recorded. The mean preoperative and postoperative LEFS scores were 56 and 73. The median pre-/postoperative metatarsophalangeal angle was 32.5/4 degrees and the intermetatarsal angle 15.5/5 degrees. The metatarsal rotation was satisfactorily corrected in 24 of 25 patients. An Akin osteotomy was needed in 27 of 30 feet. All patients were satisfied with the surgery, and no recurrence or complications were found. PROMO is a reliable technique, with good short-term results in terms of angular correction, satisfaction, and recurrence. Long-term studies are needed to determine if a lower hallux recurrence rate occurs with the correction of metatarsal rotation in comparison with conventional osteotomies. IV, prospective case series.

Biomechanical Computational Study of Pedicle Screw Position and Density in Adolescent Idiopathic Scoliosis Instrumentation.

Computer simulation of adolescent idiopathic scoliosis instrumentation. To test the hypothesis that different screw densities would result in different apical vertebral rotation (AVR) corrections and bone-screw forces in adolescent idiopathic scoliosis instrumentation. The "Minimize Implants Maximize Outcomes" Clinical Trial revealed that the use of more versus fewer screws resulted in similar coronal plane correction for Lenke 1A curves. However, the biomechanical impact of screw density on transverse plane correction is still unclear. Further investigation is needed to determine if and how transverse plane correction is correlated with screw density. We simulated apical vertebral derotation after segmental translation using patient-specific computer models of 30 patients from the "Minimize Implants Maximize Outcomes" Trial. For each case, 10 alternative screw patterns were tested with overall densities ranging between 1.2 and 2 screws per level fused, and local density at the 3 apical levels ranging between 0.7 and 2 (total: 600 simulations). Main thoracic (MT) Cobb angle, thoracic kyphosis (TK), AVR, and bone-screw forces were computed and compared. The presenting MT (62 ± 11°; range: 45° to 86°), TK (27 ± 20°; -5° to 81°), and AVR (14±7°; -2° to 25°) were corrected through segmental translation to 22 ± 7° (10° to 41°), 26 ± 5° (18° to 45°), and 14 ± 7° (-4° to 26°). After apical vertebral derotation, they became 16 ± 8° (1° to 41°), 24 ± 4° (13° to 40°), and 4 ± 5° (-12° to 18°). There was no significant difference in MT among screw patterns; higher screw density had lower bone-screw forces ( P < 0.05). The apical vertebral derotation maneuver reduced AVR by an average of 70%, positively correlated with apical screw density ( r = 0.825, P < 0.05). There was no significant difference in TK. Screw density had no significant effect on 3-dimensional correction through the primary segmental translation maneuver. Transverse plane correction through subsequent apical vertebral derotation was positively correlated with screw density at the apical levels ( r = 0.825, P < 0.05). Bone-screw forces were negatively correlated with overall screw density ( P < 0.05).

Biomechanical analysis of rod contouring in posterior spinal instrumentation and fusion for 3D correction of adolescent idiopathic scoliosis.

To biomechanically evaluate 3D corrective forces and deformity correction attributable to key parameters of rod contouring in posterior spinal fusion (PSF) for adolescent idiopathic scoliosis (AIS). Computerised patient-specific biomechanical models of six AIS cases were used to simulate PSF and evaluate the effects of 5.5-mm cobalt-chrome rod contouring angle (concave-convex angles: 30°-15°, 45°-15° and 60°-15°), length (spanning 4 and 7 vertebrae), and apex location (T7, T9). 3D correction and bone-implant forces were computed and analysed. By increasing the concave rod contour from 30° to 60°, thoracic kyphosis (TK) increased from 18° ± 2° (15°-19°) to 24° ± 2° (22°-26°), apical vertebra rotation (AVR) correction increased from 41%(SD8%) to 66%(SD18%) whilst the main thoracic curve (MT) correction decreased from 68%(SD6%) to 56%(SD8%). With a contouring length of 4 vs. 7 vertebrae, the resulting TK, AVR and MT corrections were 22° ± 1° (19°-26°) vs. 19° ± 10° (15°-22°), 57%(SD18%) vs. 50%(SD26%) and 59%(SD1%) vs. 69%(SD35%), respectively. With the rod contouring apex at T7 (vs. T9), AVR corrections were 69% (SD19%) vs. 44% (SD9%), with no significant difference in TK and MT corrections, and with comparatively 67% of screw pull-out forces. Corrective forces were more evenly shared with fixation on 7 vs. 4 vertebrae. Rod contouring of a greater angulation, over a shorter portion of the rod, and more centred at the apex of the main thoracic curve apex improved AVR correction and allowed greater restoration of TK, but resulted in significantly higher screw pull-out forces and came at the expense of less coronal plane correction.

LOFAR Deep Fields: Probing faint Galactic polarised emission in ELAIS-N1

We present the first deep polarimetric study of Galactic synchrotron emission at low radio frequencies. Our study is based on 21 observations of the European Large Area Infrared Space Observatory Survey-North 1 (ELAIS-N1) field using the Low-Frequency Array (LOFAR) at frequencies from 114.9 to 177.4 MHz. These data are a part of the LOFAR Two-metre Sky Survey Deep Fields Data Release 1. We used very low-resolution (4.3′) Stokes QU data cubes of this release. We applied rotation measure (RM) synthesis to decompose the distribution of polarised structures in Faraday depth, and cross-correlation RM synthesis to align different observations in Faraday depth. We stacked images of about 150 h of the ELAIS-N1 observations to produce the deepest Faraday cube at low radio frequencies to date, tailored to studies of Galactic synchrotron emission and the intervening magneto-ionic interstellar medium. This Faraday cube covers ~36 deg2 of the sky and has a noise of 27 µJy PSF−1 RMSF−1 in polarised intensity. This is an improvement in noise by a factor of approximately the square root of the number of stacked data cubes (~√20), as expected, compared to the one in a single data cube based on five-to-eight-hour observations. We detect a faint component of diffuse polarised emission in the stacked cube, which was not detected previously. Additionally, we verify the reliability of the ionospheric Faraday rotation corrections estimated from the satellite-based total electron content measurements to be of ~0.05 гad m−2. We also demonstrate that diffuse polarised emission itself can be used to account for the relative ionospheric Faraday rotation corrections with respect to a reference observation.

SNAPPING HIP SYNDROME: A SYSTEMATIC REVIEW OF CURRENT SURGICAL MANAGEMENT AND A CASE REPORT OF AN OVERLOOKED CAUSE

IntroductionSnapping hip syndrome is a common condition affecting 10% of the population. It is due to the advance of the iliotibial band (ITB) over the greater trochanter during lower limb movements and often associated with hip overuse, such as in athletic activities. Management is commonly conservative with physiotherapy or can be surgical to release the ITB. Here we carry out a systematic review into published surgical management and present a case report on an overlooked cause of paediatric snapping hip syndrome.Materials &amp; MethodsA systematic review looking at published surgical management of snapping hip was performed according to PRISMA guidelines. PubMed, MEDLINE, EMBASE, CINAHL and the Cochrane Library databases were searched for “((Snapping hip OR Iliotibial band syndrome OR ITB syndrome) AND (Management OR treatment))”. Adult and paediatric published studies were included as few results were found on paediatric snapping hip alone.Results1548 studies were screened by 2 independent reviewers. 8 studies were included with a total of 134 cases, with an age range of 14–71 years. Surgical management ranged from arthroscopic, open or ultrasound guided release of the ITB, as well as gluteal muscle releases. Common outcome measures showed statistically significant improvement pre- and post-operatively in visual analogue pain score (VAPS) and the Harris Hip Score (HHS). VAPS improved from an average of 6.77 to 0.3 (t-test p value &lt;0.0001) and the HHS improved from an average of 62.6 to 89.4 (t-test p value &lt;0.0001).ConclusionsAlthough good surgical outcomes have been reported, no study has reported on the effect of rotational profile of the lower limbs and snapping hip syndrome. We present the case of a 13-year-old female with snapping hip syndrome and trochanteric pain. Ultrasound confirmed external snapping hip with normal soft tissue morphology and radiographs confirmed no structural abnormalities. Following extensive physiotherapy and little improvement, she presented again aged 17 with concurrent anterior knee pain, patella mal-tracking and an asymmetrical out-toeing gait. CT rotational profile showed 2° of femoral neck retroversion and excessive external tibial torsion of 52°. Consequently, during her gait cycle, in order to correct her increased foot progression angle, the hip has to internally rotate approximately 35–40°, putting the greater trochanter in an anterolateral position in stance phase. This causes the ITB to snap over her abnormally positioned greater trochanter. Therefore, to correct rotational limb alignment, a proximal tibial de-rotation osteotomy was performed with 25° internal rotation correction. Post-operatively the patient recovered well, HHS score improved from 52.5 to 93.75 and her snapping hip has resolved. This study highlights the importance of relevant assessment and investigation of lower limb rotational profile when exploring causes of external snapping hip, especially where ultrasound and radiographs show no significant pathology.

Dosimetric effect of six degrees of freedom couch top with rotational setup error corrections in proton therapy.

To investigate the dosimetric effect of six degrees of freedom (6DoF) couch top with rotational corrections in proton therapy (PT). The water equivalent thickness (WET) was measured using a proton beam with a 6DoF couch top and patient immobilization base plate (PIBP) placed in front of a motorized water phantom. The accuracy verification was performed with the beam axis set perpendicular to the 6DoF couch top and tilted in 10° steps from 10° to 30°. Up to 3° rotational correction may be added during the actual treatment to correct the rotational setup error on our system. The measured and calculated values using the treatment planning system were compared. Additionally, the effect of the 3° difference was evaluated using actual measurements concerning each angle on the proton beam range. The WET of the 6DoF couch top and PIBP were 8.5±0.1mm and 6.8±0.1mm, respectively. The calculation and the actual measurement at each angle agreed within 0.2mm at the maximum. A maximum difference of approximately 0.6mm was confirmed when tilted at 3° following 30° with the 6DoF couch top plus PIBP. The dosimetric effect of the 6DoF couch top with rotational corrections in PT differs depending on the incidence angle on the couch top, and it increased with the increased oblique angle of incidence. However, the effect on the range was as small as 0.6mm at the maximum. The amount of rotational correction, the angle of incidence of the beam, and the effect of rotational corrections on the proton beam range may differ depending on the structure of the couch top. Therefore, sufficient prior confirmation, and subsequent periodical quality assurance management are important.

Investigation on effect of anti-cavitation edge on performance and leakage vortex characteristics of tubular turbine for ocean power generation

Anti-cavitation edge directly affects turbine runner performance and clearance leakage flow. This paper takes a tubular turbine as the object of study and uses the numerical simulation method of SST-CC turbulence model based on rotation and curvature correction to study the effect of anti-cavitation edge thickness on the turbine internal flow patterns and the flow characteristics of tip leakage vortex under different conditions. The results show that the high-altitude bubble concentrated area on the blade suction surface is reduced after installing the anti-cavitation edges. Meanwhile, the leakage volume decreases by 13.28% under the optimal condition, and the maximum leakage decreases by 37.72% under the off-design condition. The raised structure of the anti-cavitation edge can effectively push the tip leakage vortex (TLV) away from the blade suction surface and destroy the original vortex structure; the strength of tip separation vortex (TSV) is obviously reduced. The energy loss increasingly reduces with the increase of anti-cavitation edge thickness, and the loss reduction value is greater in the off-design condition. The small negative helicity vortex at the draft tube wall surface disappears. The above research results provide a certain reference for the performance optimization of tubular turbine.

Image guidance and interfractional anatomical variation in paediatric abdominal radiotherapy.

To identify variables predicting interfractional anatomical variations measured with cone-beam CT (CBCT) throughout abdominal paediatric radiotherapy, and to assess the potential of surface-guided radiotherapy (SGRT) to monitor these changes. Metrics of variation in gastrointestinal (GI) gas volume and separation of the body contour and abdominal wall were calculated from 21 planning CTs and 77 weekly CBCTs for 21 abdominal neuroblastoma patients (median 4 years, range: 2 - 19 years). Age, sex, feeding tubes, and general anaesthesia (GA) were explored as predictive variables for anatomical variation. Furthermore, GI gas variation was correlated with changes in body and abdominal wall separation, as well as simulated SGRT metrics of translational and rotational corrections between CT/CBCT. GI gas volumes varied 74 ± 54 ml across all scans, while body and abdominal wall separation varied 2.0 ± 0.7 mm and 4.1 ± 1.5 mm from planning, respectively. Patients < 3.5 years (p = 0.04) and treated under GA (p < 0.01) experienced greater GI gas variation; GA was the strongest predictor in multivariate analysis (p < 0.01). Absence of feeding tubes was linked to greater body contour variation (p = 0.03). GI gas variation correlated with body (R = 0.53) and abdominal wall (R = 0.63) changes. The strongest correlations with SGRT metrics were found for anterior-posterior translation (R = 0.65) and rotation of the left-right axis (R = -0.36). Young age, GA, and absence of feeding tubes were linked to stronger interfractional anatomical variation and are likely indicative of patients benefiting from adaptive/robust planning pathways. Our data suggest a role for SGRT to inform the need for CBCT at each treatment fraction in this patient group. This is the first study to suggest the potential role of SGRT for the management of internal interfractional anatomical variation in paediatric abdominal radiotherapy.

Comprehensive Treatment Uncertainty Analysis and PTV Margin Estimation for Fiducial Tracking in Robotic Liver Stereotactic Body Radiation Therapy.

This study aims to quantify the uncertainties of CyberKnife Synchrony fiducial tracking for liver stereotactic body radiation therapy (SBRT) cases, and evaluate the required planning target volume (PTV) margins. A total of 11 liver tumor patients with a total of 57 fractions, who underwent SBRT with synchronous fiducial tracking, were enrolled for the present study. The correlation/prediction model error, geometric error, and beam targeting error were quantified to determine the patient-level and fraction-level individual composite treatment uncertainties. The composite uncertainties and multiple margin recipes were compared for scenarios with and without rotation correction during treatment. The correlation model error-related uncertainty was 4.3±1.8, 1.4±0.5 and 1.8±0.7 mm in the superior-inferior (SI), left-right, and anterior-posterior directions, respectively. These were the primary contributors among all uncertainty sources. The geometric error significantly increased for treatments without rotation correction. The fraction-level composite uncertainties had a long tail distribution. Furthermore, the generally used 5-mm isotropic margin covered all uncertainties in the left-right and anterior-posterior directions, and only 75% of uncertainties in the SI direction. In order to cover 90% of uncertainties in the SI direction, an 8-mm margin would be needed. For scenarios without rotation correction, additional safety margins should be added, especially in the superior-inferior and anterior-posterior directions. The present study revealed that the correlation model error contributes to most of the uncertainties in the results. Most patients/fractions can be covered by a 5-mm margin. Patients with large treatment uncertainties might need a patient-specific margin.