Rotation Changes Research Articles

Mapping wrist motion: 3D CT analysis after scapholunate ligament transection.

The injury of the scapholunate (SL) ligament is common in wrist traumas leading to pain and reduced wrist function. The wrist's unique joint design and possible underlying theories as the carpal row theory were subject to earlier investigations studying wrist kinematics. Nevertheless, a comprehensive understanding of how SL ligament injuries affect wrist biomechanics is still lacking. Through a quantitative analysis of carpal bone motion patterns, we evaluated the impact on wrist kinematics occurring after SL ligament injury. We conducted a study using computer tomography imaging to analyse wrist kinematics after SL ligament transection in 21 fresh-frozen anatomical specimens. The collected data were then transformed into 3D models, employing both standardized global and object coordinate systems. The study encompassed the evaluation of rotation and translation for each individual carpal bone, as well as the ulna, and all metacarpal bones in reference to the radius. The study showed a significant increase in rotation towards palmar (p < 0.01), particularly notable for the scaphoid, following transection of the SL ligament during palmar flexion. Ulnar deviation did not significantly affect rotation or translation, and radial deviation also showed no significant changes in rotation or translation. The study highlights the significance of the SL ligament in wrist kinematics, revealing that SL ligament tears lead to changes in wrist motion. While we observed significant rotational changes for the scaphoid, other carpal bones showed less pronounced alterations, emphasizing the complexity of wrist biomechanics.

On the Emergence of Ferromagnetism in LaCoO3 Ultrathin Films

AbstractIt is well known that the properties of a crystal evolve as it increases in size from a single atomic plane to that of the bulk. Such size‐dependent transitions can stem from many different origins and depend on minute changes to crystal bonding and composition. A model example is that of LaCoO3, which is non‐magnetic in the bulk but can display ferromagnetism at the nanoscale. Here, the evolution of structure‐property relationships is studied in the LaCoO3−δ/SrTiO3 (001) system as the thickness of LaCoO3−δ is increased from a single plane to 10 unit cells. In situ synchrotron X‐ray studies are performed during and post‐deposition to probe changes in the interactions between structure, stoichiometry, and magnetic behavior. Structural quantification indicates that the oxygen octahedral rotation pattern evolves with thickness, due to inherent differences in crystal symmetry between the film and substrate. The change in rotation modifies the required energy barrier for the spin state transition via the Co–O bond length and Co–O–Co bond angle, affecting the appearance of ferromagnetism. Our results highlight the contributions of high spin Co2+ and/or high spin Co3+ to respective weak and robust ferromagnetism and the evolution of properties with size in ultrathin LaCoO3−δ heterostructures.

Linking main ecological clusters of soil bacterial–fungal networks and nitrogen cycling genes to crop yields under diverse cropping systems in the North China Plain

BackgroundCrop rotation changes crop species and the associated management strategies, significantly influencing soil fertility and soil microbial communities. Interactions among the species in microbial communities are important for soil nutrient cycling. Yet, the contribution of soil microbial interactions to crop yield and soil nitrogen-cycle function under wheat–maize and wheat–soybean rotation conversion remains unclear. An 8-year field experiment was conducted to investigate the impact of simple [8-year wheat–maize rotation (8WM) and 8-year wheat–soybean rotation (8WS)] and diverse cropping systems [4-year wheat–soybean followed by 4-year wheat–maize rotation (4WS4WM) and 4-year wheat–maize followed by 4-year wheat–soybean rotation (4WM4WS)] on crop yield, soil properties, bacterial–fungal co-occurrence networks and nitrogen functional potentials. The abundances of genes with nitrogen fixation (nifH), nitrification (AOB and nxrA) and denitrification (narG, nirK, norB and nosZ) potentials were quantified and bacterial and fungal communities were characterized.Results4WS4WM led to higher succeeding maize yields and lower bacterial–fungal network complexity, nitrogen fixation potentials and denitrifying potentials than 8WM. Meanwhile, 4WM4WS exhibited higher succeeding wheat and soybean yields, network complexity and lower nitrifying potentials than 8WS. The ecological cluster with the most nitrifying and denitrifying bacterial species (Module#5) and that with the least species (Module#3) dominated the potentials of nitrogen fixation, nitrification and denitrification and succeeding maize yields in 4WS4WM and 8WM. Module#4 with the highest abundances of nitrifying bacteria (Nitrosomonadaceae) and Module#2 with the most species dominated the nitrifying potentials and succeeding wheat and soybean yields in 4WM4WS and 8WS. Soil water content, organic carbon, dissolved organic carbon, NO3− and pH were key drivers influencing Module#3 and Module#5, while only NH4+ significantly affected Module#2 and Module#4.ConclusionsThese findings demonstrate the importance of ecological clusters within soil microbial network in regulating crop yield and soil nitrogen cycling, and identify specific ecological clusters dominating nitrogen functional potentials in wheat–maize and wheat–soybean rotations, offering science-based recommendations for sustainable crop rotation practices.Graphical

Segmental deformity markers offer novel indicators of deformity progression risk in deformity-matched adolescent idiopathic scoliosis patients.

Identification of adolescent idiopathic scoliosis (AIS) patients with mild curvatures who pose significant risk of progressing to severe levels of curvatures is of paramount importance for clinical care. This study aimed to compare segmental deformity changes in AIS sub-cohorts that are dichotomised by progression status. Thirty-six female participants with Lenke 1 AIS curves were investigated with sequential MRIs during growth. Scans were reformatted to measure orthogonal segmental parameters, including sagittal/coronal wedging angles and axial rotation angles. Participants were dichotomised by progression. Two-tailed, independent sample t-tests were used to compare sub-cohort multi-segmental and segmental deformity parameters. Measurements were compared at each scan number and variable rates of change were determined using actual time between measures. AIS progression status sub-cohorts were comparable at scan 1 for multi-segmental deformity parameters (e.g. major thoracic curve angle, rib hump, kyphosis) (P > 0.05). However, apical measures of coronal IVD wedging, axial IVD rotation and axial vertebral rotation were segmental parameters at scan 1 which were larger for participants whose AIS would later go on to clinically progress (all P < 0.05). Measures of segmental hypokyphosis were comparable between groups. As development was tracked at each subsequent scan, coronal and axial plane differences between groups increased in both magnitude and number of differences. Initial disparity and then subsequent increasing magnitude of change of axial rotation may indicate a higher propensity to clinically progress in the future. This knowledge hopes to provide useful management information for AIS care providers and prognostic education for patients alike. II.

Computerized Generation of Endodontic Files by Reproducing the Flute Grinding Manufacturing Process.

Background: File fracture during root canal treatment in endodontics is a major concern for clinicians. The strength of the file is strongly dependent on its geometry, material, and working conditions; finite element simulations are used to understand these failure mechanisms. One limitation of the models used for these simulations is the approximate geometric representation typically obtained by rotating and scaling a specific cross-section shape along the file length. Given the influence of file geometry on file strength, a more realistic representation based on the manufacturing method is needed. Methods: A computerized method was developed to generate the file geometry by simulating the flute grinding manufacturing process. This method generates the 3D geometry of the file starting from a blank and reproducing the motions of the file and grinding wheel. Results: The cross-section of the resulting geometry does not involve simple rotation and scaling but changes from the shank to the tip. The tilt angle of the grinding wheel affects the final geometry, thus altering the convexity of the cross-section. Several other parameters, such as the pitch and the radius of the grinding disc tip, impact the final geometry. Conclusions: The proposed computational method allows for the generation of endodontic file geometries that match those produced via the actual flute grinding method. This tool may help researchers and tool designers in the preparation of finite element models to assess the strength of realistic files.

Visually induced vertical vergence as a motion processing biomarker associated with postural instability

The present study explored visually induced vertical vergence (VIVV) as non-specific motion processing response. Healthy participants (7 male, mean age 28.57 ± 2.30; 9 female, mean age 27.67 ± 3.65) were exposed to optokinetic stimuli in an HTC VIVE virtual reality headset while VIVV, pupil-size, and postural sway was recorded. The methodology was shown to produce VIVV in the roll plane at 30 deg/s. Subsequent trials consisted of 40 s optokinetic motion in yaw, pitch, and roll directions at 60 deg/s, and radial optic flow; optokinetic directions were inverted after 20 s of motion. Median VIVV amplitude changes were normalized to the clockwise roll rotation, analysed, and correlated with changes in pupil-size and body sway. VIVV, pupil-size, and body sway were all affected by changes in optokinetic direction. Post-hoc analyses showed significant VIVV responses during optokinetic yaw and pitch rotations, as well as during radial optic flow stimulations. VIVV magnitudes were universally correlated with pupil-size and body sway. In conclusion, VIVV was expressed in all tested dimensions and may consequently serve as a visual motion processing biomarker. Failing to support binocularity while responding to optokinetic directionality, VIVV may reflect an eye-movement response associated with increased postural instability and stress, similar to a dorsal light reflex.

Tip, torque and rotation of maxillary molars during distalization using Invisalign: a CBCT study

BackgroundDesirable molar distalization by bodily movement is challenging and can be difficult to achieve. This study investigated changes in molar angulation (mesiodistal tipping), molar inclination (buccolingual torque) and rotation during distalization using clear aligner therapy (CAT).Materials and methodsThis retrospective study included 38 cone beam computed tomographic images (CBCTs) taken for patients treated with molar distalization using CAT. The study evaluated pre- (T0) and post-treatment (T1) CBCTs of 19 adult patients (36.68 ± 13.50 years) who underwent maxillary molar distalization using Invisalign® aligners (Align Technology, Inc., San José, CA, USA) with a minimum of 2 mm distalization. Changes in maxillary molar tip, torque and rotation were measured for 61 molars (183 roots). Paired t-test was used to evaluate the differences between pre- and post-treatment readings. The level of significance was set at p ≤ 0.05. The reproducibility of measurements was assessed by the intraclass correlation coefficient (ICC).ResultsMolar angulation did not show significant change after distalization (p = 0.158) however, there was significant increase in buccal molar inclination (p = 0.034) and mesiobuccal molar rotation (p < 0.001).ConclusionMolar distalization of 2 mm did not cause significant molar tipping. Maxillary molars showed significant buccal inclination (increased torque) and mesiobuccal rotation after distalization.

Changes in femoral anteversion after intramedullary nailing for pediatric femoral shaft fracture: a multicenter study

BackgroundThe rotational change after using a flexible intramedullary (IM) nail for femoral shaft fractures has been a concern for many surgeons. Recently, a statistical shape model (SSM) was developed for the three-dimensional reconstruction of the femur from two-dimensional plain radiographs. In this study, we measured postoperative femoral anteversion (FAV) in patients diagnosed with femoral shaft fractures who were treated with flexible IM nails and investigated age-related changes in FAV using the SSM.MethodsThis study used radiographic data collected from six regional tertiary centers specializing in pediatric trauma in South Korea. Patients diagnosed with femoral shaft fractures between September 2002 and June 2020 and patients aged < 18 years with at least two anteroposterior (AP) and lateral (LAT) femur plain radiographs obtained at least three months apart were included. A linear mixed model (LMM) was used for statistical analysis.ResultsOverall, 72 patients were included in the study. The average patient age was 7.6 years and the average follow-up duration was 6.8 years. The average FAV of immediate postoperative images was 27.5 ± 11.5°. Out of 72 patients, 52 patients (72.2%) showed immediate postoperative FAV greater than 20°. The average FAV in patients with initial FAV > 20° was 32.74°, and the LMM showed that FAV decreased by 2.5° (p = 0.0001) with each 1-year increase from the time of initial trauma.ConclusionsThis study explored changes in FAV after femoral shaft fracture using a newly developed technology that allows 3D reconstruction from uncalibrated 2D images. There was a pattern of change on the rotation of the femur after initial fixation, with a 2.5° decrease of FAV per year.

Prevalence and Patterns of Positional Dental Anomalies in First Permanent Molars: Insights from a Study in Oradea, Romania.

Tooth position anomalies, influenced by both genetic and environmental factors, can significantly impact oral health and play a critical role in establishing proper occlusion. The aim of this study was to identify the most prevalent tooth position anomalies in first permanent molars among Romanian patients and to evaluate additional variables as well. This retrospective study utilized digital study models to identify all existing tooth position anomalies. The study included patients aged 12 to 40 years with complete permanent dentition. Axial changes (buccal tilting, oral tilting, mesial tilting, and distal tilting) as well as rotational changes (mesio-buccal rotation and disto-buccal rotation) were investigated. After applying the exclusion criteria, 103 patients remained in the study. Our findings revealed a notable prevalence of positional anomalies, with disto-buccal rotations being most common in upper molars (tooth 1.6-22.3%, tooth 2.6-31.1%) and oral tilting predominating in lower molars (tooth 3.6-6.8%, tooth 4.6-14.6%). Interestingly, neither gender nor malocclusion type significantly influenced the occurrence of tooth position anomalies. Symmetrical patterns in positional changes were observed, with patients having tooth position anomalies at 1.6 significantly more frequently associated with anomalies at 2.6. Similarly, anomalies at 3.6 were significantly more frequently associated with anomalies at 4.6. Additionally, for molars 2.6 and 3.6 on the left side, the differences were statistically significant, with patients having anomalies at 2.6 significantly more frequently associated with anomalies at 3.6. This pattern was not observed for the molars situated on the right side of the dental arches. While this study provides insights into positional anomalies in first permanent molars among the Romanian population, its retrospective design and focus on a specific demographic may limit generalizability. In conclusion, the study underscores the significant prevalence of positional anomalies in first permanent molars among adolescents and adults in Oradea, Romania. Early detection and targeted interventions are crucial to address these anomalies and improve orthodontic outcomes. Comprehensive assessment and treatment planning are essential to achieve optimal dental harmony and function. Further research is needed to elucidate the underlying factors contributing to these positional changes and their long-term impact on oral health and occlusal stability.

Temporal changes in tibiofemoral relationship following anterior cruciate ligament injury: Implications for rotational dynamics and clinical outcomes.

This study aims to elucidate changes in the tibiofemoral relationship over time following anterior cruciate ligament (ACL) injury, and investigate the correlation between the tibiofemoral relationship and patient-related outcome measures (PROMs). Overall, 203 primary ACL reconstructions were performed using autologous hamstring grafts. Medial and lateral anterior tibial translation (ATT) in the sagittal plane and tibial tubercle-trochlear groove (TT-TG) distance in the axial plane were measured using pre-operative magnetic resonance imaging and post-operative computed tomography. The difference between pre-operative and post-operative values for each parameter was calculated: ΔMesdial ATT, ΔLateral ATT and ΔTT-TG distance. The correlation between each calculated value and the time elapsed since ACL injury, and the correlation between each calculated value and PROMs-evaluated using the Knee Injury and Osteoarthritis Outcome Score (KOOS)-were assessed. Sixty-four patients were enroled. Medial ATT, lateral ATT and TT-TG distance were significantly different pre-operatively compared to post-operative values, with the tibia translating anteriorly and rotating internally relative to the femur. ΔMedial ATT, ΔLateral ATT and ΔTT-TG distance were 1.6, 8.8 and -4.8 mm, respectively. A negative correlation was observed between the ΔTT-TG distance and the time elapsed since the injury (r = -0.44, p < 0.01). No correlation was found between ΔMedial ATT and the time elapsed since the injury, nor between ΔLateral ATT and the time elapsed since the injury. Neither the ΔMedial ATT, ΔLateral ATT, nor ΔTT-TG distance correlated with the pre-operative or post-operative KOOS subscale scores. The tibia underwent internal rotation relative to the femur over time following ACL injury, highlighting the importance of assessing rotational changes in ACL-injured knees. Level Ⅲ.

Pre- and Post-Operative Cone Beam Computed Tomography Assessment of the Temporomandibular Joint in Patients with Orthognathic Surgery.

This study aimed to compare the pre- and post-operative temporomandibular joint (TMJ) condylar position in dentofacial deformity (DFD) patients who had orthognathic surgeries using cone beam computed tomography (CBCT). A retrospective study evaluating the pre- and post-operative CBCT for 79 DFD patients (equivalent to 158 TMJs) (mean age = 26.62 ± 9.5 years) with a bilateral sagittal split osteotomy with or without Le Fort I surgeries (n = 29 Class II DFD, n = 50 Class III DFD) was performed. This included the compartmental measurement of TMJ spaces, in addition to the measurement of intercondylar distances and angles. Condylar position centricity was assessed using the Pullinger and Hollender formula. Clinical data were analysed for DFD class, the type of surgery and post-operative CBCT timing. Pre- and post-operative measurements were compared statistically using a paired t-test, Wilcoxon signed-rank test, and Stuart-Maxwell test. TMJ condyles tended to relocate post-operatively in a posterosuperior position with internal rotation in Class II DFD and a superior position with internal rotation in Class III DFD. However, the overall changes were within <0.5 mm translation and <4° rotation and the number of concentrically positioned condyles (according to the Pullinger and Hollender formula) did not change significantly. Orthognathic surgery is associated with minor post-operative translational and rotational condylar positional changes in Class II and III DFDs.

A recursive calculation method of vibration displacements using blade tip timing in angular domain

Blade tip timing (BTT) is a non-contact measurement technique that can be used to monitor blade vibration in turbomachinery. The raw data measured by BTT is the arrival time of all blades at the same stage. However, most blade vibration monitoring methods based on BTT require the use of blade vibration displacements, which are derived from the raw arrival time data, the blade rotation radius and speed. Conventional BTT methods calculate blade tip displacements by comparing the measured arrival time with the ideal arrival time. The ideal arrival time is obtained by assuming that the rotational speed is constant in a revolution, which is inconsistent with the fact, especially when the rotational speed changes rapidly. In this paper, a recursive calculation method called recursive BTT is proposed to reduce the influence of rotational speed fluctuation on the accuracy of blade tip displacement calculation. Recursive BTT calculates the displacements in the angular domain instead of the time domain. A recursive formula is constructed in the angular domain to calculate the blade vibration displacement by using the angle between the vibrating blades. Compared with the conventional BTT method, which relies on the once-per-revolution (OPR) signal, recursive BTT makes full use of the arrival time of all blades at the same stage to calculate the displacements. The advantage of recursive BTT is illustrated through a simulation, a laboratory test and a full-scale aeroengine test. To evaluate the reliability of the calculated displacements, strain signals are resampled to compare with the calculated displacements in the laboratory test. In the full-scale aeroengine test, due to the lack of strain signals, BTT displacements are used to track the blade natural frequency to qualitatively indicate the influence of displacements on blade vibration monitoring. The results of finite element analysis and modal test are used for verification in the full-scale aeroengine test. Simulation and experimental results demonstrate that compared with existing methods, recursive BTT is robust for calculating blade vibration displacements.

Impact of rotation change on the emptying of an ideal bottle of water

Impact of rotation change on the emptying of an ideal bottle of water

Relation between change of effective lens position and toric IOL rotation after toric IOL implantation

PurposeTo evaluate the relationship between change of effective lens position (ELP) and toric intraocular lens (IOL) rotation in patients with increasing postoperative refractive astigmatism after successful toric IOL implantation. MethodsThe subjects include 61 people (61 eyes) with increasing residual astigmatism >0.5 D 3 months after successful toric IOL implantation. Clinical measurements included preoperative, 1-week, and 1-, 2-, and 3-month postoperative visual acuity; refraction; keratometer; anterior and posterior corneal astigmatism; ELP by Scheimpflug camera imaging; and IOL axis by slit-lamp biomicroscopic photograph with pupil dilation. ResultsResidual astigmatism in postoperative month 3 (0.81 ± 0.50 D) is higher than that at postoperative week 1 (0.41 ± 0.38 D; p < 0.05). ELP decreased by 264.44 ± 163.25 μm, and the IOL rotated by 2.91 ± 1.44 degrees from week 1 to month 3 (p < 0.05). The ELP change had a positive correlation with IOL rotation (R2 = 0.383; p = 0.006), and the postoperative refractive astigmatic change had a positive correlation with ELP change (R2 = 0.272; p = 0.027) and IOL rotation (R2 = 0.272; p = 0.0001) from week 1 to month 3. ConclusionELP change can influence toric IOL rotation and increase residual astigmatism after toric IOL implantation.

Three-Dimensional Evaluation of Changes in Condylar Position After Orthognathic Surgery With Different Types of Jaw Deformities

BackgroundAssessing condyle position post orthognathic surgery is pivotal for optimizing surgical accuracy, sustaining postoperative stability, and ensuring predictable treatment outcomes. PurposeThe aim of this study was to analyze the changes of condyle position after orthognathic surgery with different types of jaw deformity and to analyze whether the changes of condyle position are different. Study design, setting, sampleA retrospective cohort study was designed and conducted, involving adults who underwent orthognathic surgery for jaw deformities at the affiliated Stomatological Hospital of Nanchang University between 2019 and 2022. Patients with incomplete CT data were excluded. Predictor/exposure/independent variableThe primary predictor variable was time (pre-operative and post-operative) and types of jaw deformities (skeletal Class III, skeletal Class II, and mandibular deviation). Main outcome variable(s)The main outcome variables were the 3D linear and rotational positional changes of the condyle. CovariatesEvaluated covariates included sex and age. AnalysesMIMICS 20.0 software measured all data, and SPSS 22.0 software facilitated statistical analyses. Intra- and inter-group correlation analyses employed paired t-tests and independent t-tests, with statistical significance set at P < 0.05. ResultsThe study sample was composed of 32 subjects with a mean age of 22.43±1.6 and 9 were male. The analysis of changes of condylar position from virtual surgical planning to immediate postoperative period showed that the maximum condylar displacement was 1.74 mm and the maximum angular change was 3.92°. The analysis of changes in condylar position from the immediate postoperative period to 1-year postoperatively showed no statistically significant changes for the same type of jaw deformity. But patients with Class II malocclusion exhibited distinct condylar displacement and rotation patterns compared to those with Class III malocclusion and mandibular deformity. Conclusions and RelevanceThe application of virtual surgical planning in orthognathic surgery ensures a high degree of consistency in achieving the desired condylar position. Moreover, no significant change in condylar position was observed after orthognathic surgery for the same type of jaw deformity. However, patients with Class II deformities exhibited a higher susceptibility to rotational displacement of the condyles compared to those with other types of jaw deformities.

Investigation of joint contact forces during walking in the subjects with toe in gait due to increasing in femoral head anteversion angle.

Toe-in gait is a pathology in which the child walks and turns the foot inward instead of pointing straight ahead. The alignment of the lower limb structure changes in this disease, increasing the incidence of knee and hip osteoarthritis. This study aimed to determine the kinematic and joint loading in subjects walking with a toe-in gait pattern. This study selected two groups of subjects: normal subjects and those with toe-in gait due to an increased femoral head anteversion angle (each group consisted of 15 subjects). A Qualisys motion analysis system and a Kistler force plate were used to record the motions and forces applied to the leg while walking. OpenSim software (version 3.3) was used to analyze the range of motion, moments, muscle forces, and joint contact forces in both groups of subjects. The mean values of stride length for normal subjects (1.1 ± 0.141 m) and those with toe-in gait (0.94 ± 0.183 m) differed significantly. The mediolateral component of the ground reaction force decreased significantly in the toe-in gait group compared to normal subjects (p-value = 0.05). The peak force of most of the hip joint muscles increased significantly in those with toe-in gait compared to normal subjects (p-value < 0.05). The results of this study showed that those with toe-in gait, due to an increase in femoral head anteversion angle, only had a change in rotation of the pelvic and hip joint. There was no significant difference between walking speed and most ground reaction force components between normal subjects and those with toe-in gait. As the peaks of most of the hip joint muscles increased significantly in the toe-in gait group, this increased joint contact forces (especially the anteroposterior component of the hip joint and the mediolateral component of the knee joint), which may ultimately increase the incidence of hip and knee joint osteoarthritis.

Nasal profile changes after LeFort I osteotomy (maxillary advancement) with and without ANS reduction in class III skeletal patients: a study protocol for a randomized clinical trial

BackgroundDentofacial malformation is a common condition that affects a significant portion of the population, resulting in functional and aesthetic defects. Orthognathic surgeries, such as LeFort I osteotomy, are performed to correct these abnormalities. However, the impact of these surgeries on nasal profile changes remains unclear. Additionally, the role of anterior nasal spine (ANS) reduction in maxillary advancement surgeries of 3–5 mm range is yet to be determined. This study aims to investigate the effect of ANS reduction on soft tissue profile changes following LeFort I osteotomy with a maxillary advancement range of 3–5 mm in class III skeletal patients. The hypothesis is that the changes in nasolabial angle and upper lip length will not significantly differ between patients who undergo LeFort I osteotomy with and without ANS reduction.Method and designThis study is designed as a randomized controlled trial. A total of 26 class III skeletal patients with maxillofacial abnormalities will be recruited from the maxillofacial clinic of Bu-Ali and Farahikhtegan Hospitals in Tehran, Iran. Patients meeting the inclusion criteria will be randomly assigned to two groups: one group will undergo LeFort I osteotomy with ANS reduction, and the other group will undergo LeFort I osteotomy without ANS reduction. The soft tissue profile changes, specifically the nasolabial angle and upper lip length, will be evaluated and compared between the two groups.DiscussionAchieving facial harmony through orthognathic surgery requires careful planning and consideration of the impact on surrounding soft tissue. The primary objective is to predict and plan for the effects on the nasolabial region. LeFort I osteotomy is a common procedure used to correct dentofacial deformities, particularly in class III patients. Maxillary advancement during this surgery can lead to changes in nasal tip position, width, and rotation, potentially due to repositioning of the anterior nasal spine and soft tissue dissection. In this study, soft tissue changes will be assessed in non-growing class III patients using cephalometric radiographs. The impact of reducing the anterior nasal spine (ANS) on nasal profile changes will be investigated for maxillary advancements of 3–5 mm. Objective measurements and patient-reported outcomes will be evaluated to gain insights into the aesthetic outcomes of orthognathic surgery. The findings will provide valuable guidance for treatment decisions and alternative options based on expected nasal profile changes.Trial registrationThis project was registered at The Iranian Registry of Clinical Trials (Identifier No. IRCT20210928052625N1, Website: https://www.irct.ir/trial/59171) and Open Science Framework (OSF) (Registration https://doi.org/10.17605/OSF.IO/X3HD4). 2021-06-09.

Utilizing Multi-Source Data and Cloud Computing Platform to Map Short-Rotation Eucalyptus Plantations Distribution and Stand Age in Hainan Island

Short-rotation eucalyptus plantations play a key positive role in the forestry economy due to their fast-growing and high-yielding properties. However, some studies have suggested that eucalyptus plantations introductions may have negative impacts on biodiversity and ecosystems’ stability. In order to precisely and promptly determine the influence of eucalyptus plantations on soil characteristics and hydrological processes, based on the rotation change rules of eucalyptus plantations, this study combined the continuous change detection and classification and spectral mixture analysis (CCDC-SMA) algorithm and the random forest (RF) algorithm to map the distribution and stand age of short-rotation eucalyptus plantations in Hainan Island. First, the forest distribution map was used to mask out the rubber plantations, and forest disturbances were extracted through the CCDC-SMA algorithm to determine the potential short-rotation eucalyptus plantations distribution. Second, using CCDC-SMA algorithm fitting coefficients, field surveys, original spectral bands, vegetation indices, and digital elevation models (DEM) as inputs to the RF algorithm, short-rotation eucalyptus plantations distribution maps were created and evaluated based on Google Earth images. Finally, the stand age of the newly mapped short-rotation eucalyptus plantations was estimated based on the breakpoints of the CCDC-SMA algorithm. The results showed that the producer, user, and overall accuracies of the 2022 short-rotation eucalyptus plantations map were estimated at 0.95, 0.95, and 0.94, respectively, and the validation R2 of the estimated stand ages was at 0.97. The eucalyptus plantations in Hainan Island had a total area of roughly 9.93 × 104 ha in 2022. Danzhou City had the highest planting area of eucalyptus plantations, followed by Changjiang County, Chengmai County, and Lingao County. It was worth noting that the eucalyptus plantations were mostly located in places with low altitudes (&lt;200 m) and flat slopes (&lt;10°). Approximately 43.91% of eucalyptus plantations were located in the three major watersheds. In addition, the 1-year-old eucalyptus plantations accounted for the highest areal percentage of 30.58%. These datasets are valuable tools to aid sustainable production, ecological assessment, and conservation of eucalyptus plantations.

Arg40 is critical for stability and activity of Adenylosuccinate lyase; a purine salvage enzyme from Leishmania donovani

Purine salvage enzymes have been of significant interest in anti-Leishmanial drug development due to the parasite's critical dependence on this pathway for the supply of nucleotides in the absence of a de novo purine synthesis pathway. Adenylosuccinate lyase (ADSL) one of the key enzymes in this pathway is a homo-tetramer, where the active site is formed by residues from three distinct subunits. Analysis of the subunit interfaces of LdADSL, revealed a conserved Arg40 forming critical inter-subunit interactions and also involved in substrate binding. We hypothesized that mutating this residue can affect both the structural stability and activity of the enzyme. In our study, we used biochemical, biophysical, and computational simulation approaches to understand the structural and functional role of Arg40 in LdADSL. We have replaced Arg40 with an Ala and Glu using site directed mutagenesis. The mutant enzymes were similar to wild-type enzyme in secondary structure and subunit association. Thermal shift assays indicated that the mutations affected the protein stability. Both mutants showed decreased specific activities in both forward and reverse directions with significantly weakened affinities towards succinyl-adenosine monophosphate (SAMP). The mutations resulted in changes in C3 loop conformation and D3 domain rotation. Consequently, the orientation of the active site amino acid residues changed resulting in compromised activity and stability. Studies so far have majorly focused on the ADSL active site for designing drugs against it. Our work indicates that an alternative inhibitory mechanism for the enzyme can be designed by targeting the inter-subunit interface.

Study on flow pattern transition of cuttings transport in extended-reach drilling

Inadequate hole cleaning is one of the major challenges in extended-reach drilling, especially prominent in large-sized hole sections, such as 121/4-in. section. As the drilling parameters including flow rate, ROP and rotational speed change, the cuttings flow pattern converts between fully suspended flow, two-layer flow, and three-layer flow. However, most existing cuttings transport models only study the problem of cuttings transport under a certain flow pattern and do not consider the dynamic conversion of different cuttings flow patterns. Pipe rotation plays a key role in cuttings transport in rotary drilling, but the existing studies have not fully revealed the effect of pipe rotation on the conversion of cuttings transport patterns. In this paper, a stirring diffusion factor is presented to quantify the effect of pipe rotation on cuttings transport, and the mathematical expression of the stirring diffusion factor is obtained through numerical simulations and the nonlinear regression method. Secondly, the critical conditions for the conversion of cuttings flow patterns are obtained by combining mechanical analysis and numerical simulation results, clarifying the applicable scope of different cuttings flow patterns. According to the comparison with experimental results, the prediction error of the new model considering the conversion of cuttings flow patterns is not higher than 11.1%, and the minimum prediction error is only 3.07%. Thirdly, the flow pattern maps for cuttings transport under different drilling parameters are drawn to provide guidance for the identification of cuttings transport pattern and optimization of drilling parameters. Finally, the flow pattern maps are applied to a case study of an extended-reach drilling. The results show that there is a delay effect in the conversion of cuttings flow patterns due to the nonlinear characteristics of annular geometry. Furthermore, the effects of flow rate, ROP and rotational speed on cuttings transport patterns are not independent, but mutually reinforcing and constraining each other. Inappropriate selection of drilling parameters will result in three-layer flow of cuttings transport, and then pipe sticking is likely to occur. The cuttings transport pattern can be converted from three-layer flow to two-layer flow by optimizing drilling parameters, which can significantly improve the hole cleaning effect.