Rotary Catalytic Mechanism Research Articles

The series of conformational states adopted by rotorless F1-ATPase during its hydrolysis cycle

F1Fo ATP synthase interchanges phosphate transfer energy and proton motive force via a rotary catalytic mechanism and isolated F1-ATPase subcomplexes can also hydrolyze ATP to generate rotation of their central γ rotor subunit. As ATP is hydrolyzed, the F1-ATPase cycles through a series of conformational states that mediates unidirectional rotation of the rotor. However, even in the absence of a rotor, the α and β subunits are still able to pass through a series of conformations, akin to those that generate rotation. Here, we use cryoelectron microscopy to establish the structures of these rotorless states. These structures indicate that cooperativity in this system is likely mediated by contacts between the β subunit lever domains, irrespective of the presence of the γ rotor subunit. These findings provide insight into how long-range information may be transferred in large biological systems.

Cryo-EM analysis of V/A-ATPase intermediates reveals the transition of the ground-state structure to steady-state structures by sequential ATP binding

Vacuolar/archaeal-type ATPase (V/A-ATPase) is a rotary ATPase that shares a common rotary catalytic mechanism with FoF1 ATP synthase. Structural images of V/A-ATPase obtained by single-particle cryo-electron microscopy during ATP hydrolysis identified several intermediates, revealing the rotary mechanism under steady-state conditions. However, further characterization is needed to understand the transition from the ground state to the steady state. Here, we identified the cryo-electron microscopy structures of V/A-ATPase corresponding to short-lived initial intermediates during the activation of the ground state structure by time-resolving snapshot analysis. These intermediate structures provide insights into how the ground-state structure changes to the active, steady state through the sequential binding of ATP to its three catalytic sites. All the intermediate structures of V/A-ATPase adopt the same asymmetric structure, whereas the three catalytic dimers adopt different conformations. This is significantly different from the initial activation process of FoF1, where the overall structure of the F1 domain changes during the transition from a pseudo-symmetric to a canonical asymmetric structure (PNAS NEXUS, pgac116, 2022). In conclusion, our findings provide dynamical information that will enhance the future prospects for studying the initial activation processes of the enzymes, which have unknown intermediate structures in their functional pathway.

CryoEM Reveals the Complexity and Diversity of ATP Synthases

During respiration, adenosine triphosphate (ATP) synthases harness the electrochemical proton motive force (PMF) generated by the electron transport chain (ETC) to synthesize ATP. These macromolecular machines operate by a remarkable rotary catalytic mechanism that couples transmembrane proton translocation to rotation of a rotor subcomplex, and rotation to ATP synthesis. Initially, x-ray crystallography, nuclear magnetic resonance (NMR) spectroscopy, and cross-linking were the only ways to gain insights into the three-dimensional (3D) structures of ATP synthases and, in particular, provided ground-breaking insights into the soluble parts of the complex that explained the catalytic mechanism by which rotation is coupled to ATP synthesis. In contrast, early electron microscopy was limited to studying the overall shape of the assembly. However, advances in electron cryomicroscopy (cryoEM) have allowed determination of high-resolution structures, including the membrane regions of ATP synthases. These studies revealed the high-resolution structures of the remaining ATP synthase subunits and showed how these subunits work together in the intact macromolecular machine. CryoEM continues to uncover the diversity of ATP synthase structures across species and has begun to show how ATP synthases can be targeted by therapies to treat human diseases.

Structural snapshots of V/A-ATPase reveal the rotary catalytic mechanism of rotary ATPases

V/A-ATPase is a motor protein that shares a common rotary catalytic mechanism with FoF1 ATP synthase. When powered by ATP hydrolysis, the V1 domain rotates the central rotor against the A3B3 hexamer, composed of three catalytic AB dimers adopting different conformations (ABopen, ABsemi, and ABclosed). Here, we report the atomic models of 18 catalytic intermediates of the V1 domain of V/A-ATPase under different reaction conditions, determined by single particle cryo-EM. The models reveal that the rotor does not rotate immediately after binding of ATP to the V1. Instead, three events proceed simultaneously with the 120˚ rotation of the shaft: hydrolysis of ATP in ABsemi, zipper movement in ABopen by the binding ATP, and unzipper movement in ABclosed with release of both ADP and Pi. This indicates the unidirectional rotation of V/A-ATPase by a ratchet-like mechanism owing to ATP hydrolysis in ABsemi, rather than the power stroke model proposed previously for F1-ATPase.

The nucleotide binding affinities of two critical conformations of Escherichia coli ATP synthase

ATP synthase is essential in aerobic energy metabolism, and the rotary catalytic mechanism is one of the core concepts to understand the energetic functions of ATP synthase. Disulfide bonds formed by oxidizing a pair of cysteine mutations halted the rotation of the γ subunit in two critical conformations, the ATP-waiting dwell (αE284C/γQ274C) and the catalytic dwell (αE284C/γL276C). Tryptophan fluorescence was used to measure the nucleotide binding affinities for MgATP, MgADP and MgADP-AlF4 (a transition state analog) to wild-type and mutant F1 under reducing and oxidizing conditions. In the reduced state, αE284C/γL276C F1 showed a wild-type-like nucleotide binding pattern; after oxidation to lock the enzyme in the catalytic dwell state, the nucleotide binding parameters remained unchanged. In contrast, αE284C/γQ274C F1 showed significant differences in the affinities of the oxidized versus the reduced state. Locking the enzyme in the ATP-waiting dwell reduced nucleotide binding affinities of all three catalytic sites. Most importantly, the affinity of the low affinity site was reduced to such an extent that it could no longer be detected in the binding assay (Kd > 5 mM). The results of the present study allow to present a model for the catalytic mechanism of ATP synthase under consideration of the nucleotide affinity changes during a 360° cycle of the rotor.

ATP Synthase: Expression, Purification, and Function.

ATP synthase is an essential enzyme found in all known forms of life, generating the majority of cellular energy via a rotary catalytic mechanism. Here, we describe the in-depth methods for expression, purification, and functional assessment of E. coli ATP synthase.

Cryo-EM structure of the homohexameric T3SS ATPase-central stalk complex reveals rotary ATPase-like asymmetry

Many Gram-negative bacteria, including causative agents of dysentery, plague, and typhoid fever, rely on a type III secretion system – a multi-membrane spanning syringe-like apparatus – for their pathogenicity. The cytosolic ATPase complex of this injectisome is proposed to play an important role in energizing secretion events and substrate recognition. We present the 3.3 Å resolution cryo-EM structure of the enteropathogenic Escherichia coli ATPase EscN in complex with its central stalk EscO. The structure shows an asymmetric pore with different functional states captured in its six catalytic sites, details directly supporting a rotary catalytic mechanism analogous to that of the heterohexameric F1/V1-ATPases despite its homohexameric nature. Situated at the C-terminal opening of the EscN pore is one molecule of EscO, with primary interaction mediated through an electrostatic interface. The EscN-EscO structure provides significant atomic insights into how the ATPase contributes to type III secretion, including torque generation and binding of chaperone/substrate complexes.

Structure and conformational states of the bovine mitochondrial ATP synthase by cryo-EM.

Adenosine triphosphate (ATP), the chemical energy currency of biology, is synthesized in eukaryotic cells primarily by the mitochondrial ATP synthase. ATP synthases operate by a rotary catalytic mechanism where proton translocation through the membrane-inserted FO region is coupled to ATP synthesis in the catalytic F1 region via rotation of a central rotor subcomplex. We report here single particle electron cryomicroscopy (cryo-EM) analysis of the bovine mitochondrial ATP synthase. Combining cryo-EM data with bioinformatic analysis allowed us to determine the fold of the a subunit, suggesting a proton translocation path through the FO region that involves both the a and b subunits. 3D classification of images revealed seven distinct states of the enzyme that show different modes of bending and twisting in the intact ATP synthase. Rotational fluctuations of the c8-ring within the FO region support a Brownian ratchet mechanism for proton-translocation-driven rotation in ATP synthases.

The study of vacuolar-type ATPases by single particle electron microscopy

Nature's molecular machines often work through the concerted action of many different protein subunits, which can give rise to large structures with complex activities. Vacuolar-type ATPases (V-ATPases) are membrane-embedded protein assemblies with a unique rotary catalytic mechanism. The dynamic nature and instability of V-ATPases make structural and functional studies of these enzymes challenging. Electron microscopy (EM) techniques, especially single particle electron cryomicroscopy (cryo-EM) and negative-stain EM, have provided extensive insight into the structure and function of these protein complexes. This minireview outlines what has been learned about V-ATPases using electron microscopy, highlights current challenges for their structural study, and discusses what cryo-EM will allow us to learn about these fascinating enzymes in the future.

Origin of Asymmetry at the Intersubunit Interfaces of V1-ATPase from Thermusthermophilus

V-type ATPase (V-ATPase) is one of the rotary ATPase complexes that mediate energy conversion between the chemical energy of ATP and the ion gradient across the membrane through a rotary catalytic mechanism. Because V-ATPase has structural features similar to those of well-studied F-type ATPase, the structure is expected to highlight the common essence of the torque generation of rotary ATPases. Here, we report a complete model of the extra-membrane domain of the V-ATPase (V1-ATPase) of a thermophilic bacterium, Thermus thermophilus, consisting of three A subunits, three B subunits, one D subunit, and one F subunit. The X-ray structure at 3.9Å resolution provides detailed information about the interactions between A3B3 and DF subcomplexes as well as interactions among the respective subunits, which are defined by the properties of side chains. Asymmetry at the intersubunit interfaces was detected from the structural differences among the three AB pairs in the different reaction states, while the large interdomain motion in the catalytic A subunits was not observed unlike F1 from various species and V1 from Enterococcus hirae. Asymmetry is mainly realized by rigid-body rearrangements of the relative position between A and B subunits. This is consistent with the previous observations by the high-resolution electron microscopy for the whole V-ATPase complexes. Therefore, our result plausibly implies that the essential motion for the torque generation is not the large interdomain movement of the catalytic subunits but the rigid-body rearrangement of subunits.

Rotary Motion of FOF1-ATP Synthase in the Presence of pmf

FoF1-ATP synthase (FoF1) is a molecular motor protein, which synthesizes ATP coupling with clockwise rotations driven by the proton motive force (pmf) and also reversibly hydrolyzes ATP which drives anticlockwise rotations to form the electrochemical proton gradient. Extensive studies revealed the rotary catalytic mechanism of ATP-driven rotation of FoF1; however, that of pmf-driven rotation was poorly understood. Therefore, we tried to characterize the pmf-driven rotation of FoF1 by controlling the amplitudes of pmf.

The structure of the peripheral stalk of Thermus thermophilus H+-ATPase/synthase

Proton-translocating ATPases are ubiquitous protein complexes that couple ATP catalysis with proton translocation via a rotary catalytic mechanism. The peripheral stalks are essential components that counteract torque generated from proton translocation during ATP synthesis or from ATP hydrolysis during proton pumping. Despite their essential role, the peripheral stalks are the least conserved component of the complexes, differing substantially between subtypes in composition and stoichiometry. We have determined the crystal structure of the peripheral stalk of the A-type ATPase/synthase from Thermus thermophilus consisting of subunits E and G. The structure contains a heterodimeric right-handed coiled coil, a protein fold never observed before. We have fitted this structure into the 23 A resolution EM density of the intact A-ATPase complex, revealing the precise location of the peripheral stalk and new implications for the function and assembly of proton-translocating ATPases.

Pharmacological Profile of the Selective Mitochondrial F1F0 ATP Hydrolase Inhibitor BMS‐199264 in Myocardial Ischemia

The mitochondrial F1F0 ATP synthase is responsible for the majority of ATP production in mammals and does this through a rotary catalytic mechanism. Studies show that the F1F0 ATP synthase can switch to an ATP hydrolase, and this occurs under conditions seen during myocardial ischemia. This ATP hydrolysis causes wasting of ATP that does not produce work. The degree of ATP inefficiently hydrolyzed during ischemia may be as high as 50-90% of the total. A naturally occurring, reversible inhibitor (IF-1) of the hydrolase activity is in the mitochondria, and it has a pH optimum of 6.8. Based on studies with the nonselective (inhibit both synthase and hydrolase activity) inhibitors aurovertin B and oligomycin B reduce the rate of ATP depletion during ischemia, showing that IF-1 does not completely block hydrolase activity. Oligomycin and aurovertin cannot be used for treating myocardial ischemia as they will reduce ATP production in healthy tissue. We generated a focused structure-activity relationship, and several compounds were identified that selectively inhibited the F1F0 ATP hydrolase activity while having no effect on synthase function. One compound, BMS-199264 had no effect on F1F0 ATP synthase function in submitochondrial particles while inhibiting hydrolase function, unlike oligomycin that inhibits both. BMS-199264 selectively inhibited ATP decline during ischemia while not affecting ATP production in normoxic and reperfused hearts. BMS-191264 also reduced cardiac necrosis and enhanced the recovery of contractile function following reperfusion. These data also suggest that the reversal of the synthase and hydrolase activities is not merely a chemical reaction run in reverse.

Fluid Mechanical Matching of H +-ATP Synthase Subunit c-Ring with Lipid Membranes Revealed by 2H Solid-State NMR

The F 1F o-ATP synthase utilizes the transmembrane H + gradient for the synthesis of ATP. F o subunit c-ring plays a key role in transporting H + through F o in the membrane. We investigated the interactions of Escherichia coli subunit c with dimyristoylphosphatidylcholine (DMPC- d 54) at lipid/protein ratios of 50:1 and 20:1 by means of 2H-solid-state NMR. In the liquid-crystalline state of DMPC, the 2H-NMR moment values and the order parameter ( S CD) profile were little affected by the presence of subunit c, suggesting that the bilayer thickness in the liquid-crystalline state is matched to the transmembrane hydrophobic surface of subunit c. On the other hand, hydrophobic mismatch of subunit c with the lipid bilayer was observed in the gel state of DMPC. Moreover, the viscoelasticity represented by a square-law function of the 2H-NMR relaxation was also little influenced by subunit c in the fluid phase, in contrast with flexible nonionic detergents or rigid additives. Thus, the hydrophobic matching of the lipid bilayer to subunit c involves at least two factors, the hydrophobic length and the fluid mechanical property. These findings may be important for the torque generation in the rotary catalytic mechanism of the F 1F o-ATPse molecular motor.

Novel features of the rotary catalytic mechanism revealed in the structure of yeast F1 ATPase

The crystal structure of yeast mitochondrial F(1) ATPase contains three independent copies of the complex, two of which have similar conformations while the third differs in the position of the central stalk relative to the alpha(3)beta(3) sub-assembly. All three copies display very similar asymmetric features to those observed for the bovine enzyme, but the yeast F(1) ATPase structures provide novel information. In particular, the active site that binds ADP in bovine F(1) ATPase has an ATP analog bound and therefore this structure does not represent the ADP-inhibited form. In addition, one of the complexes binds phosphate in the nucleotide-free catalytic site, and comparison with other structures provides a picture of the movement of the phosphate group during initial binding and subsequent catalysis. The shifts in position of the central stalk between two of the three copies of yeast F(1) ATPase and when these structures are compared to those of the bovine enzyme give new insight into the conformational changes that take place during rotational catalysis.

Mechanics of coupling proton movements to c-ring rotation in ATP synthase

F1F0 ATP synthases generate ATP by a rotary catalytic mechanism in which H+ transport is coupled to rotation of an oligomeric ring of c subunits extending through the membrane. Protons bind to and then are released from the aspartyl-61 residue of subunit c at the center of the membrane. Subunit a of the F0 sector is thought to provide proton access channels to and from aspartyl-61. Here, we summarize new information on the structural organization of Escherichia coli subunit a and the mapping of aqueous-accessible residues in the second, fourth and fifth transmembrane helices (TMHs). Aqueous-accessible regions of these helices extend to both the cytoplasmic and periplasmic surface. We propose that aTMH4 rotates to alternately expose the periplasmic or cytoplasmic half-channels to aspartyl-61 of subunit c during the proton transport cycle. The concerted rotation of interacting helices in subunit a and subunit c is proposed to be the mechanical force driving rotation of the c-rotor, using a mechanism akin to meshed gears.

The Amino-terminal Domain of the E Subunit of Vacuolar H+-ATPase (V-ATPase) Interacts with the H Subunit and Is Required for V-ATPase Function

Vacuolar H(+)-ATPases (V-ATPases) are highly conserved proton pumps that couple hydrolysis of cytosolic ATP to proton transport out of the cytosol. Although it is generally believed that V-ATPases transport protons by a rotary catalytic mechanism analogous to that used by F(1)F(0)-ATPases, the structure and subunit composition of the central or peripheral stalk of the multisubunit complex are not well understood. We searched for proteins that bind to the E subunit of V-ATPase using the yeast two-hybrid assay and identified the H subunit as an interacting partner. Physical association between the E and H subunits of V-ATPase was confirmed in vitro by precipitation assays. Deletion mapping analysis revealed that a 78-amino acid fragment at the amino terminus of the E subunit was sufficient for binding to the H subunit. Expression of the amino-terminal fragments of the E subunits from human and yeast as dominant-negative mutants resulted in dramatic decreases in bafilomycin A(1)-sensitive ATP hydrolysis and proton transport activities of V-ATPase. Our data demonstrate the physiological significance of the interaction between the E and H subunits of V-ATPase and extend previous studies on the arrangement of subunits on the peripheral stalk of V-ATPase.

Coupling proton movements to c-ring rotation in F 1F o ATP synthase: aqueous access channels and helix rotations at the a– c interface

F 1F o ATP synthases generate ATP by a rotary catalytic mechanism in which H + transport is coupled to rotation of a ring of c subunits within the transmembrane sector of the enzyme. Protons bind to and then are released from the aspartyl-61 residue of subunit c at the center of the membrane. Proton access channels to and from aspartyl-61 are thought to form in subunit a of the F o sector. Here, we summarize new information on the structural organization of subunit a and the mapping of aqueous accessible residues in the fourth and fifth transmembrane helices (TMHs). Cysteine substituted residues, lying on opposite faces of aTMH-4, preferentially react with either N-ethyl-maleimide (NEM) or Ag +. We propose that aTMH-4 rotates to alternately expose each helical face to aspartyl-61 of subunit c during the proton transport cycle. The concerted helical rotation of aTMH-4 and cTMH-2 are proposed to be coupled to the stepwise mechanical movement of the c-rotor.

Insights into the Rotary Catalytic Mechanism of F0F1 ATP Synthase from the Cross-linking of Subunits b and c in the Escherichia coli Enzyme

The transmembrane sector of the F(0)F(1) rotary ATP synthase is proposed to organize with an oligomeric ring of c subunits, which function as a rotor, interacting with two b subunits at the periphery of the ring, the b subunits functioning as a stator. In this study, cysteines were introduced into the C-terminal region of subunit c and the N-terminal region of subunit b. Cys of N2C subunit b was cross-linked with Cys at positions 74, 75, and 78 of subunit c. In each case, a maximum of 50% of the b subunit could be cross-linked to subunit c, which suggests that either only one of the two b subunits lie adjacent to the c-ring or that both b subunits interact with a single subunit c. The results support a topological arrangement of these subunits, in which the respective N- and C-terminal ends of subunits b and c extend to the periplasmic surface of the membrane and cAsp-61 lies at the center of the membrane. The cross-linking of Cys between bN2C and cV78C was shown to inhibit ATP-driven proton pumping, as would be predicted from a rotary model for ATP synthase function, but unexpectedly, cross-linking did not lead to inhibition of ATPase activity. ATP hydrolysis and proton pumping are therefore uncoupled in the cross-linked enzyme. The c subunit lying adjacent to subunit b was shown to be mobile and to exchange with c subunits that initially occupied non-neighboring positions. The movement or exchange of subunits at the position adjacent to subunit b was blocked by dicyclohexylcarbodiimide. These experiments provide a biochemical verification that the oligomeric c-ring can move with respect to the b-stator and provide further support for a rotary catalytic mechanism in the ATP synthase.

Mutations in Single Hairpin Units of Genetically Fused Subunit c Provide Support for a Rotary Catalytic Mechanism in F0F1 ATP Synthase

Previously, we generated genetically fused dimers and trimers of subunit c of the Escherichia coli ATP synthase based upon the precedent of naturally occurring dimers in V-type H(+)-transporting ATPases. The c(2) and c(3) oligomers have proven useful in testing hypothesis regarding the mechanism of energy coupling. In the first part of this paper, the uncoupling Q42E substitution has been introduced into the second loop of the c(2) dimer or the third loop of the c(3) trimer. Both mutant proteins proved to be as functional as the wild type c(2) dimer or wild type c(3) trimer. The results argue against an obligatory movement of the epsilon subunit between loops of monomeric subunit c in the c(12) oligomer during rotary catalysis. Rather, the results support the hypothesis that the c-epsilon connection remains fixed as the c-oligomer rotates. In the second section of this paper, we report on the effect of substitution of the proton translocating Asp(61) in every second helical hairpin of the c(2) dimer, or in every third hairpin of the c(3) trimer. Based upon the precedent of V-type ATPases, where the c(2) dimer occurs naturally with a single proton translocating carboxyl in every second hairpin, these modified versions of the E. coli c(2) and c(3) fused proteins were predicted to have a functional H(+)-transporting ATPase activity, with a reduced H(+)/ATP stoichiometry, but to be inactive as ATP synthases. A variety of Asp(61)-substituted proteins proved to lack either activity indicating that the switch in function in V-type ATPases is a consequence of more than a single substitution.