Risk Of Femoral Fracture Research Articles

The Risk of Postoperative Periprosthetic Femoral Fracture After Total Hip Arthroplasty Depends More on Stem Design Than Cement Use: An Analysis of National Health Data from England.

In this study, we estimated the risk of surgically treated postoperative periprosthetic femoral fractures (POPFFs) associated with femoral implants frequently used for total hip arthroplasty (THA). In this cohort study of patients who underwent primary THA in England between January 1, 2004, and December 31, 2020, POPFFs were identified from prospectively collected revision records and national hospital records. POPFF incidence rates, adjusting for potential confounders, were estimated for common stems. Subgroup analyses were performed for patients >70 years of age, with non-osteoarthritic indications, and with femoral neck fracture. POPFFs occurred in 0.6% (5,100) of 809,832 cases during a median follow-up of 6.5 years (interquartile range [IQR], 3.9 to 9.6 years). After cemented stem implantation, the majority of POPFFs were treated with fixation. Adjusted prosthesis time incidence rates (PTIRs) for POPFFs varied by stem design, regardless of cement fixation. Cemented composite beam (CB) stems demonstrated the lowest risk of POPFF. Collared cementless stems had an equivalent or lower rate of POPFF compared with the current gold standard of a polished taper slip cemented stem. Cemented CB stems were associated with the lowest POPFF risk, and some cementless stem designs outperformed modern cemented stem designs. Stem design was strongly associated with POPFF risk, regardless of the presence of cement. Surgeons, policymakers, and patients should consider these findings when considering femoral implants in those most at risk for POPFF. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Increased Risk of Femoral Neck Stress Fractures in Patients With Cam or Pincer Morphology.

Previous studies suggest a relationship between femoroacetabular impingement (FAI) and femoral neck stress fractures (FNSF), due to pathologic biomechanics in the setting of femoral head abutment (cam morphology) and/or acetabular overcoverage (pincer morphology). The purpose of this study is to evaluate the association between cam or pincer morphology and FNSF, compared to a control group of patients without hip pain. A retrospective review of the electronic medical record at a single institution was queried for patients with FNSF over a 10-year time period from January 2011-2021. These patients were compared to a control group with diagnostic radiographs and a chief complaint that was not hip pain presenting to the institution's emergency department. Hip morphology was evaluated radiographically. A multivariate logistic regression was used to investigate an association between FNSF and cam or pincer morphology. Eighty-three patients with FNSF and a mean age of 38.6 years were compared to 55 healthy controls with a mean age of 35.8 years. Patients in the FNSF group were more often female, white, and had lower BMI. These patients were also more likely to have associated cam morphology (p = 0.010). Binary logistic regression demonstrated a statistically significant independent association between both cam (OR 5.2, p = 0.01) and pincer (OR 4.6, p = 0.022) morphology with FNSF when controlling for demographic variables. Black race and higher BMI were protective factors for FNSF (OR 0.09, OR 0.84, p < 0.01). In summary, radiographic cam morphology, superolateral acetabular overcoverage, female sex, and lower BMI are risk factors for sustaining FNSF, while the black race was found to be protective.

Direct Anterior Approach “No Trial Reduction Technique” in Bipolar Hemiarthroplasty for Treatment of Osteoporotic Femoral Neck Fracture: Surgical Techniques and Case Series

Bipolar hemiarthroplasty (BHA) for osteoporotic femoral neck fractures has a risk of proximal femoral fracture during trials, especially with larger trial bipolar shells. This study introduces a novel technique for BHA via the direct anterior approach, aiming to reduce trial use and lower the risk of iatrogenic femoral fractures. The “no trial reduction technique” involves positioning only the trial neck segment against the acetabulum's medial wall, without the bipolar shell and trial head. Fluoroscopy measures limb length differences to determine optimal femoral head and bipolar shell thickness, resulting in comparable limb lengths without early complications. [ Orthopedics . 202x;4x(x):xx–xx.]

A Deep Learning Approach based on Two-channel 3DCNN Networks to Predict the Risk of Femoral Fracture using CT&amp;#xA0;Images

A Deep Learning Approach based on Two-channel 3DCNN Networks to Predict the Risk of Femoral Fracture using CT&amp;#xA0;Images

Appropriate sagittal positioning of femoral components in total knee arthroplasty to prevent fracture and loosening.

This study aimed to investigate the optimal sagittal positioning of the uncemented femoral component in total knee arthroplasty to minimize the risk of aseptic loosening and periprosthetic fracture. Ten different sagittal placements of the femoral component, ranging from -5 mm (causing anterior notch) to +4 mm (causing anterior gap), were analyzed using finite element analysis. Both gait and squat loading conditions were simulated, and Von Mises stress and interface micromotion were evaluated to assess fracture and loosening risk. During gait, varied sagittal positioning did not lead to excessive Von Mises stress or micromotion. However, under squat conditions, posterior positioning (-4 and -5 mm) resulted in stress exceeding 150 MPa at the femoral notch, indicating potential fracture risk. Conversely, +1 mm and 0 mm sagittal positions demonstrated minimal interface micromotion. Slightly anterior sagittal positioning (+1 mm) or neutral positioning (0 mm) effectively reduced stress concentration at the femoral notch and minimized interface micromotion. Thus, these positions are deemed suitable to decrease the risk of aseptic loosening and periprosthetic femoral fracture.

Segmentation methods for quantifying X-ray Computed Tomography based biomarkers to assess hip fracture risk: a systematic literature review.

The success of using bone mineral density and/or FRAX to predict femoral osteoporotic fracture risk is modest since they do not account for mechanical determinants that affect bone fracture risk. Computed Tomography (CT)-based geometric, densitometric, and finite element-derived biomarkers have been developed and used as parameters for assessing fracture risk. However, to quantify these biomarkers, segmentation of CT data is needed. Doing this manually or semi-automatically is labor-intensive, preventing the adoption of these biomarkers into clinical practice. In recent years, fully automated methods for segmenting CT data have started to emerge. Quantifying the accuracy, robustness, reproducibility, and repeatability of these segmentation tools is of major importance for research and the potential translation of CT-based biomarkers into clinical practice. A comprehensive literature search was performed in PubMed up to the end of July 2024. Only segmentation methods that were quantitatively validated on human femurs and/or pelvises and on both clinical and non-clinical CT were included. The accuracy, robustness, reproducibility, and repeatability of these segmentation methods were investigated, reporting quantitatively the metrics used to evaluate these aspects of segmentation. The studies included were evaluated for the risk of, and sources of bias, that may affect the results reported. A total of 54 studies fulfilled the inclusion criteria. The analysis of the included papers showed that automatic segmentation methods led to accurate results, however, there may exist a need to standardize reporting of accuracy across studies. Few works investigated robustness to allow for detailed conclusions on this aspect. Finally, it seems that the bone segmentation field has only addressed the concept of reproducibility and repeatability to a very limited extent, which entails that most of the studies are at high risk of bias. Based on the studies analyzed, some recommendations for future studies are made for advancing the development of a standardized segmentation protocol. Moreover, standardized metrics are proposed to evaluate accuracy, robustness, reproducibility, and repeatability of segmentation methods, to ease comparison between different approaches.

7740 Adult-Onset Hypophosphatasia Presenting As Low Alkaline Phosphatase Level Following Denosumab Use For Osteoporosis

Abstract Disclosure: J. Ocampo Mascaro: None. P. Wax: None. M. Al Mukaddam: Grant Recipient; Self; Ipsen, Incyte Research Funding. Background: Hypophosphatasia (HPP) is a genetic disease characterized by low activity of the tissue non-specific alkaline phosphatase. It has a broad range of clinical phenotypes, with adults usually presenting with an incidental low alkaline phosphatase (ALP) finding. Differentiating this from other causes of low ALP is challenging, especially when treating osteoporosis, as antiresorptive therapy such as denosumab and bisphosphonates may cause low ALP and carry the potential of increasing risk of atypical femoral fractures in patients with undiagnosed HPP. Clinical Case: A 64-year-old woman with history of nephrolithiasis, hypercalciuria, and osteoporosis (screening DXA lowest T-score -3.3 in femoral neck (FN)) but no prior fractures or dental issues was seen in clinic. Initial bloodwork showed normal range calcium, 25-OH vitamin D, and intact PTH. Pre-treatment ALP was 42 IU/L (N 39-117). Work up for secondary causes of osteoporosis was negative. Three yearly doses of IV zoledronic acid resulted in +4.2% BMD increase in lumbar spine (LS) but no changes in FN. She had no side effects but was found to have a decrease in ALP to 33 IU/L. This normalized back to 42 IU/L during a three-year drug holiday. Follow up DXA noted significant decline in BMD, hence denosumab was initiated. ALP decreased back to the 30-35 IU/L range. Fasting Vitamin B6 level (off B6 supplements for 1 week) was 23.4 ng/ml (N 2.1-21). Urine phosphoethanolamine was mildly elevated at 5 mmol/mol creatinine (N ≤4). Genetic testing evidenced a pathogenic ALPL variant (Exon 6, c.575T&amp;gt;C (p.Met192Thr), heterozygous) compatible with HPP. She had tolerated three doses of denosumab by then with BMD improvement of 5.0% in LS but no changes in FN and no atypical femoral fracture. Denosumab was stopped. Abaloparatide was started for osteoporosis with close monitoring for worsening hypercalciuria. Conclusion: This case demonstrates that adult HPP patients may present with subtle findings and lower range of normal ALP and may tolerate short courses of antiresorptive agents. There is a need for better screening and diagnostic criteria for adult HPP patients whose ALP levels may not be initially low before initiating antiresorptive drugs for osteoporosis. The risk of adverse effects from therapy will likely vary significantly based on the clinical severity/presentation of HPP as some adults with lower ALP ranges might be more susceptible to developing atypical femur fractures (1). Balancing atypical femur fracture risk with the benefits of antiresorptive treatment in decreasing risk of osteoporotic fractures highlights the need for better risk stratification to prevent undertreatment of osteoporosis. Reference: 1. Warren AM, Ebeling PR, Grill V, Seeman E, Sztal-Mazer S. Bilateral atypical femoral fractures during denosumab therapy in a patient with adult-onset hypophosphatasia. Endocrinol Diabetes Metab Case Rep. 2021 Sep 1;2021:21-0096. Presentation: 6/2/2024

Total Hip Arthroplasty in Hip Osteoarthritis with Subtrochanteric Localized Periosteal Thickening: Preoperative Planning Using Finite Element Analysis to Determine the Optimal Stem Length

Background: Owing to the risk of atypical femoral fractures, total hip arthroplasty presents unique challenges for patients with ipsilateral osteoarthritis and localized periosteal thickening in the femoral subtrochanteric region. Stem length selection is critical for minimizing stress concentration in the thickened cortex to avoid such fractures. Herein, we report the case of a 78-year-old woman with ipsilateral hip osteoarthritis and localized subtrochanteric periosteal thickening. Methods: Preoperative planning included a finite element analysis to assess the stress distribution across various stem lengths. A simulation was conducted to determine the optimal stem length to span the cortical thickening and reduce the risk of postoperative complications. Results: The finite element analysis indicated that a stem length of &gt;150 mm was required to effectively reduce the stress at the site of cortical thickening. A 175 mm stem was selected for total hip arthroplasty, which provided a favorable stress distribution and avoided the risk of stress concentration. Conclusions: In cases of ipsilateral osteoarthritis with localized subtrochanteric periosteal thickening, finite element analysis can be valuable for preoperative planning to determine the optimal stem length, thereby reducing the risk of atypical femoral fractures. Further studies with multiple cases are recommended to validate these findings and improve surgical outcomes.

Association of oral hypofunction with aspiration pneumonia, fractures, and mortality in older Japanese adults.

In Japan's public health system, dentists can assess and intervene in oral hypofunction cases. However, the associations between oral hypofunction and health outcomes and costs remain unclear. This study aimed to identify these associations. This retrospective cohort study using a Japanese health insurance claims database included 45 916 individuals aged ≥65 years who underwent dental examinations for oral hypofunction. The primary outcomes were incidence rates of aspiration pneumonia, femoral or vertebral fractures and all-cause mortality. Secondary outcomes were annual medical and dental costs. We used competing risk regression and Cox models to estimate primary outcomes, and gamma regression models for secondary outcomes. The adjusted hazard ratios were 0.84 (95% CI 0.74-0.96) for the incidence of aspiration pneumonia, 1.11 (1.02-1.21) for the incidence of femoral or vertebral fractures and 1.27 (1.07-1.50) for all-cause mortality in individuals with oral hypofunction compared with those without. The adjusted relative risk was 1.05 (1.01-1.10) for annual medical costs and 0.94 (0.81-1.09) for annual dental costs in individuals with oral hypofunction compared with those without. Individuals with oral hypofunction were at increased risk of femoral or vertebral fractures and all-cause mortality, and they incurred significantly higher annual medical costs, compared with those without this condition. Notably, they showed a lower risk of aspiration pneumonia, suggesting potential benefits of dental intervention. Integrating dental care into medical strategies might be necessary to improve health outcomes and reduce healthcare costs for those with oral hypofunction. Geriatr Gerontol Int 2024; 24: 1053-1059.

Microfilm Coatings: A Biomaterial-Based Strategy for Modulating Femoral Deflection.

Wear on the surface of the femoral head increases the risk of hip and femur fractures. Biomechanical experiments conducted on the femur are based on its bending and torsional rigidities. Studies regarding the deflection of the femur bone when the femoral head is coated with microfilms composed of durable and compatible biomaterials are poor. This study aimed to investigate the effects of different biomaterial microfilm coatings over the femoral head on the deflection of the human femur. We utilized 2023 R1 finite element analysis (FEA) software to model the directional deformation on the femoral head and examine the femur's deflection with varying microfilm thicknesses. The deflection of the femur bone was reported when the femoral head was uncoated and coated with titanium, stainless steel, and pure gold microfilms of different thicknesses (namely, 50, 75, and 100 μm). Our results show that the femur's minimum and maximum deflection occurred for stainless steel and gold, respectively. The deformation of the femur was lower when the femoral head was coated with a 50-micrometer microfilm of stainless steel, compared to the deformation obtained with gold and titanium. When the thickness of the microfilm for each of the materials was increased, the deformation continued to decrease. The minimum deformation of the femur occurred for a thickness of 100 μm with stainless steel, followed by titanium and gold. The difference in the directional deformation of the femur between the materials was more significant when the coating was 100 μm, compared to the thicknesses of 50 and 75 μm. The findings of this study are expected to significantly contribute to the development of advanced medical techniques to enhance the quality of life for patients with femur bone-related issues. This information can be used to develop more resilient coatings that can withstand wear and tear.

What features of stem increase the risk of intraoperative femoral fracture during cementless primary hip arthroplasty?

Cementless fixation has become increasingly popular in hip arthroplasty due to its shorter operation time, easier technique, biologic fixation, and avoidance of bone cement implantation syndrome compared to cemented fixation. However, intraoperative periprosthetic femoral fracture (IOPFx) is a disconcerting complication during cementless hip arthroplasty. Our purpose was to identify the features of cementless stem that increase the risk of IOPFx during primary hip arthroplasty. We retrospectively reviewed all 4806 hip arthroplasties that was performed in a single institution from May 2003 to December 2020. Age at the index arthroplasty, sex, body mass index, physical status, ambulatory function, side of the operation, operational history, cause of the index arthroplasty, type of arthroplasty, surgical approach, surgeon, implant information, and events during the operation were investigated. The shoulder geometry and length of stem were also reviewed. The event of interest was narrowed down to IOPFx among various records of intraoperative events. We found IOPFx of 2.6% among all the hips operated with cementless stem. In the multivariable analysis, female (OR = 1.52), childhood hip disease (OR = 2.30), stove-pipe femur (OR = 2.43), combined approach (OR = 2.60), and standard length of stem (OR = 1.59) were found to be significant risk factors of IOPFx. In conclusion, a stem with a standard length is significantly associated with risk of IOPFx compared to a shortened stem. These findings highlight the importance of careful consideration in terms of the risk of IOPFx when standard length cementless stem is chosen.

Obese adolescents have higher risk for femur fracture after motor vehicle collision

BackgroundPrevious reports identified an association between obese adolescents (OAs) and lower extremity (LE) fractures after blunt trauma. However, the type of LE fracture remains unclear. We hypothesized that OAs presenting after motor vehicle collision (MVC) have a higher risk of severe LE fracture and will require a longer length of stay (LOS) and more support services upon discharge, compared to non-OAs. MethodsThe 2017–2019 Trauma Quality Improvement Program database was queried for adolescents (12–17-years-old) presenting after MVC. The primary outcome was LE fracture. A severe fracture was defined by abbreviated injury scale ≥3. OAs were defined by a body mass index (BMI) ≥30. ResultsFrom 22,610 MVCs, 3325 (14.7 %) included OAs. The rate of any LE fracture was higher for OAs (21.6 % vs. 18.8 %, p < 0.001). On subset analysis the only LE fracture at higher risk in OAs was a femur fracture (13 % vs. 9.1 %, p < 0.001). After adjusting for sex and age, the risk for severe LE fracture (OR 1.34, CI 1.18–1.53, p < 0.001) was higher for OAs. OAs with a femur fracture had a longer median LOS (5 vs. 4 days, p = 0.003) and were more likely discharged with additional support services including home-health or inpatient rehabilitation (30.6 % vs. 21.4 %, p < 0.001). ConclusionOAs sustaining MVCs have increased associated risk of femur fractures. OAs are more likely to have a higher-grade LE injury, experience a longer LOS, and require additional support services upon discharge. Future research is needed to determine if early disposition planning with social work assistance can help shorten LOS.

The Morphology of the Femur Influences the Fracture Risk during Stumbling and Falls on the Hip-A Computational Biomechanical Study.

Proximal femur fracture risk depends on subject-specific factors such as bone mineral density and morphological parameters. Here, we aim to analyze the dependency of the femoral strength on sixteen morphological parameters. Therefore, finite-element analyses of 20 human femurs during stumbling and lateral falls on the hip were conducted. Pearson correlation coefficients were calculated and morphological parameters with significant correlations were examined in principal component analysis and linear regression analysis. The dependency of the fracture strength on morphological parameters was more pronounced during lateral falls on the hip compared to stumbling. Significant correlations were observed between the neck shaft angle (r = -0.474), neck diameter (r = 0.507), the true distance between the femoral head center and femoral shaft axis (r = 0.459), and its projected distance on the frontal plane (r = 0.511), greater trochanter height (r = 0.497), and distance between the femoral head center and a plane parallel to the frontal plane containing the projection of the femoral head center to the femoral neck axis (r = 0.669). Principal component analysis was strongly weighted by parameters defining the lever arm during a lateral fall as well as the loaded cross-section in the femoral neck.

Factors associated with proximal femoral fractures in older adults during hospital stay: a cross-sectional study

BackgroundProximal femoral fractures in older adults affect prognosis, quality of life and medical expenses. Therefore, identifying patients with an elevated risk for proximal femoral fractures and implementing preventive measures to...

PERIPROSTHETIC FEMORAL FRACTURE RATES FOLLOWING THE USE OF DUAL-MOBILITY ACETABULAR COMPONENTS

The increased torque required to dislocate dual mobility (DM) components may increase peri-prosthetic femoral fracture (PPF) risk. Current literature often relies on revision as an endpoint and may underestimate PPF. This study aims to review PPF rate, risks and treatment following primary DM implantation.Prospective cohort study of 549 patients following primary DM total hip arthroplasty (THA) between 2013 and 2021. Collected data included demographics, indication for surgery, cortical index and PPF.549 patients were identified with primary DM THA. Mean age was 73 years (26–96). 446 (81.2%) patients had their index surgery following hip fracture. 18 patients (3.27%) sustained a PPF. Cumulative PPF rate was 1.5% at 1-year, 2.2% at 5-years and 3.27% overall. PPF was higher in patients undergoing surgery following hip fracture (4%) vs. other indications (1%). OR 4.04 (95% CI:0.53, 30.72), p=0.219. Mean cortical index was lower in patients with PPF 0.4 (95% CI:0.36, 0.45) compared to those without 0.46 (95% CI:0.45, 0.46) p=0.029. Treatment for PPF included 10 (55.6%) open reduction internal fixation (ORIF), 7 (38.9%) revision THA and 1 conservatively managed.PPF rate following DM use is higher in our cohort than published rates. Our rates are comparable to some papers when subgroup analysis of older patients and cemented taper slip stems are considered. PPF risk with DM may be increased in patients undergoing surgery after hip fracture or with a lower cortical index preoperatively. Over half of PPF were managed with ORIF and may mask PPF risk studies that report using revision as an endpoint.

Mechanical effect of changed femoral neck ante-version angles on the stability of an intertrochanteric fracture fixed with PFNA: A finite element analysis

ObjectiveChange of femoral neck ante-version angle postoperatively due to inadequate reduction could result in unsatisfying treatment outcome of intertrochanteric fracture. However, the influence of increased or decreased femoral neck ante-version on the biomechanical stability of the bone-implant complex has rarely been studied. MethodsA finite element model of a complete normal human femur with normal femoral neck ante-version as 13° was established accurately by scanning a 64 year old female femur. The models of 31-A1.1 intertrochanteric fractures with different femoral neck ante-version angles of 3°, 5.5°, 8°, 10.5°, 13°, 15.5°, 18°, 20.5°, 23° were created. They were assembled with a proximal femoral nail anti-rotation (PFNA) device. The biomechanical differences with varying femoral neck ante-version angles were compared using finite element analysis method. ResultsAs the femoral neck ante-version angle gradually increased from 13° to 23°with a gradient of 2.5°, the peak von Mises stress was gradually increased from 137.82 MPa to 276.02 MPa. Similarly, the peak von Mises stress was gradually increased from 137.82 MPa to 360.12 MPa with the femoral neck ante-version angle decreased from 13° to 3°. When decreased ante-version angle of 7.5° and increased ante-version angle of 10° will exceed the yield strength of femoral (240.32 MPa), the risk of femoral fracture will increase significantly. The maximum displacement of the femur was significantly reduced for increased ante-version models than for decreased ante-version models, whether the changes of ante-version angles were 2.5°, 5°, 7.5° or 10°. The maximum stress of PFNA was found in the intersection of main nail and helical blade, and became greater gradually as the ante-version angle increased or decreased with a gradient of 2.5°. The maximum stress of PFNA was presented in the model 5.5° with the maximum stress of 724.42 MPa (near to the yield strength of titanium alloy of 700–1000 MPa), producing the breakage risk of PFNA. The maximum displacement of the PFNA was significantly reduced for increased ante-version models than for decreased ante-version models, whether the changes of ante-version angles were 2.5°, 5°, 7.5° or 10°. ConclusionBased on the results of present study, it was demonstrated that the anatomical reduction of femoral neck ante-version was vital to secure the optimal stability. Abnormal femoral ante-version could increase the potential risk of failure for intertrochanteric fracture after PFNA. The stability of increased femoral ante-version (less than 10°) was superior to the stability of decreased ante-version (less than 5°) for the cases of difficulty to acquire anatomical reduction. The clinical implication of the finding was that increased femoral neck ante-version had an advantage of mechanical stability towards the decreased femoral neck ante-version for the cases of comminuted intertrochanteric fracture and failure of anatomical reduction.

Population based screening for osteoporosis in men among 40 and 80 years in the brazilian state of Roraima"

The main objective of this study was to conduct population screening for osteoporosis in men between the ages of 40 and 80 in the Boa Vista, the capital of the Brazilian state of Roraima. The population study conducted in this study was basically based on the Fracture Risk Assessment Tool (FRAX®) nomogram model proposed by the World Health Organization (WHO). Specifically, the current work focuses on (i) analyzing the serum concentrations of calcium, vitamin D and total testosterone in relation to the risk of bone event by the FRAX® nomogram and (ii) correlating cardiovascular risk by calculating Framingham score with the FRAX® nomogram. This cohort, and cross-sectional study involves both quantitative and qualitative data obtained in the field from 380 patients. The data obtained were compared to the pre-existing data collected through different bibliography. For the sampling, a cluster method was utilized. Patients with immediate need of health services were referred to the state hospital of Coronel Mota, Boa Vista. This project was approved by the Ethical Committee (number: 50207115.7.0000.5301). While commuting to work or travel around found to be the major reason of the fractures, we observed that older people and people who were involved in physical activities inside a gymnasium had considerably high at risk of fractures. FRAX and TBS femur score (Trabecular Bone Score) was higher for people with fractures. People having lumbar osteopenia and femur osteopenia had higher risk of TBS femur fractures while people having lumbar osteoporosis had higher risk of TBS (femur and hip) as well as FRAX femur factures. All the data obtained in this study were analyzed using SPSS version 21 and a p value of ≤0.05 was considered as statistically significant. Key risk factors for fracture include increased age, physical activities in a gymnasium, lumbar and femur osteopenia and lumbar osteoporosis.

Influence of a change in activity regime on femoral bone architecture and failure behaviour.

The incidence and morbidity of femoral fractures increases drastically with age. Femoral architecture and associated fracture risk are strongly influenced by loading during physical activities and it has been shown that the rate of loss of bone mineral density is significantly lower for active individuals than inactive. The objective of this work is to evaluate the impact of a cessation of some physical activities on elderly femoral structure and fracture behaviour. The authors previously established a biofidelic finite element model of the femur considered as a structure optimised to loading associated with daily activities. The same structural optimisation algorithm was used here to quantify the changes in bone architecture following cessation of stair climbing and sit-to-stand. Side fall fracture simulations were run on the adapted bone structures using a damage elasticity formulation. Total cortical and trabecular bone volume and failure load reduced in all cases of activity cessation. Bone loss distribution was strongly heterogeneous, with some locations even showing increased bone volume. This work suggests that maintaining the physical activities involved in the daily routine of a young healthy adult would help reduce the risk of femoral fracture in the elderly population by preventing bone loss.

Diabetes disrupts osteometric and trabecular morphometric parameters in the Zucker Diabetic Sprague-Dawley rat femur.

Type 2 diabetes mellitus is increasingly becoming more prevalent worldwide together with hospital care costs from secondary complications such as bone fractures. Femoral fracture risk is higher in diabetes. Therefore, this study aimed to assess the osteometric and microarchitecture of the femur of Zucker Diabetic Sprague-Dawley (ZDSD) femur. Ten-week-old male rats (n=38) consisting of 16 control Sprague-Dawley (SD) and 22 ZDSD rats were used. The rats were terminated at 20 weeks and others at 28 weeks of age to assess age, diabetes duration effects and its severity. Bilateral femora were taken for osteometry, bone mass measurements and micro-focus X-ray computed tomography scanning to assess the trabecular number (TbN), thickness (TbTh), spaces (TbSp), bone tissue volume to total volume (BV/TV) and volume (BV). Diabetic rats had shorter (except for 20-weeks-old), lighter, narrower, and less robust bones than SD controls that wered more robust. Although cortical area was similar in all diabatic and control rats, medullary canal area was the largest in ZDSD rats. This means that the diabetic rats bones were short, light and hollow. Diabetic rats aged 20 weeks had reduced BV, BV/TV, TbN with more spacing (TbSp). In contrast, the 28 weeks old diabetic rats only showed reduced BV and TbN. Discriminant function analysis revealed, for the first time, that osteometric parameters and TbTh, TbN, and TbSp were affected by diabetes. This knowledge is valuable in the management of diabetic complications.

Secondary fracture prevention/Update osteoporosis guidelines 2023 of the Umbrella Organization Osteology

The S3guidelines on the prophylaxis, diagnostics and treatment of osteoporosis 2023 were completely revised and updated between 2021 and 2023 in accordance with the Association of the Scientific Medical Societies of Germany (AWMF) regulations. The guideline committee consisted of delegates from the 20specialist societies of the Umbrella Organization Osteology (Dachverband Osteologie, DVO) as well as delegates from the German Society of General Medicine and Family Medicine (DEGAM), the German Society for Nephrology (DGfN) and the Federal Self-help Association for Osteoporosis (BfO).The guidelines focus on preventive measures, diagnostic procedures and treatment approaches for osteoporosis in men aged50 years and over and postmenopausal women. The main aim is the optimization of care processes, reduction of fracture incidences and maintenance or improvement of the quality of life and functional capacity of patients affected by fractures. Amajor update to the guidelines includes the introduction of anew risk calculator that can take more risk factors (n = 33) into account and that can estimate the risk of vertebral body and proximal femoral fractures for a3-year period (previously 10years). This results in new thresholds for diagnostics and treatment. The programmed app is currently not yet certified as a medical product and apaper version is therefore currently available for patient care with the planned integration of aweb-based version of the risk calculator. From the perspective of trauma surgery, the recommendations and innovations for manifest osteoporosis are of particular clinical importance. The focus of the DVO guidelines update is therefore on the implementation of secondary fracture prevention in trauma surgery, orthopedic and geriatric traumatology in the clinical and practical daily routine.