Ring-opening Polymerization Research Articles

Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols.

α-Ethylidene-δ-vinyl-δ-valerolactone (EVL) is the only intermediate to synthesize copolymers of CO2 with 1,3-butadiene whose ring-opening polymerization (ROP), however, is obstructed by the tiglate group. In the contribution, EVL derivatives are synthesized through a Michael addition reaction to saturate the conjugated double bond as well as introduce various groups to synthesize polyesters with designable molecular weights (Mn = 6.9-12.8 kg·mol-1), narrow dispersities (Đ = 1.08-1.19), tunable glass-transition temperatures (Tg = -45-3 °C), and excellent refractive indices (nd = 1.64-1.79) via living and controlled ROP. The obtained polyesters are able to be recycled to the corresponding monomers, which can prepare comparable polymers with identical side groups, realizing the homorecycling. In addition, the retro-Michael addition reaction is established and employed, realizing heterorecycling, which can alter properties during recycling. We propose a strategy for EVL derivatives and establish the corresponding polyester platform with not only high refractive indices and tunable Tgs, but also the ability to tailor properties during recycling.

Ring-opening polymerization of lactide catalyzed using metal-coordinated enzyme-like amino acid assemblies.

Polylactide (PLA), a biocompatible and biodegradable polymer, is widely used in diverse biomedical applications. However, the industry standard for converting lactide into PLA involves toxic tin (Sn)-based catalysts. To mitigate the use of these harmful catalysts, other environmentally benign metal-containing agents for efficient lactide polymerization have been studied, but these alternatives are hindered by complex synthesis processes, reactivity issues, and selectivity limitations. To overcome these shortcomings, we explored the catalytic activity of Cu-(Phe)2 and Zn-(Phe)2 metal-amino acid co-assemblies as potential catalysts of the ring-opening polymerization (ROP) of lactide into PLA. Catalytic activity of the assemblies was monitored at different temperatures and solvents using 1H-NMR spectroscopy to determine the catalytic parameters. Notably, Zn-(Phe)2 achieved >99% conversion of lactide to PLA within 12 h in toluene under reflux conditions and was found to have first-order kinetics, whereas Cu-(Phe)2 exhibited significantly lower catalytic activity. Following Zn-(Phe)2-mediated catalysis, the resulting PLA had an average molecular weight of 128 kDa and a dispersity index of 1.25 as determined by gel permeation chromatography. Taken together, our minimalistic approach expands the realm of metal-amino acid-based supramolecular catalytic nanomaterials useful in the ROP of lactide. This advancement shows promise for the future design of simplified biocatalysts in both industrial and biomedical applications.

Grafting-from Synthesis of Plant-Polynorbornene Biohybrid Materials.

Plants, essential for food, oxygen, and economic stability, are under threat from human activities, biotic threats, and climate change, requiring rapid technological advancements for protection. Biohybrid systems, merging synthetic macromolecules with biological components, have provided improvement to biological systems in the past, namely, in the biomedical arena, motivating an opportunity to enhance plant well-being. Nevertheless, strategies for plant biohybrid systems remain limited. In this study, we present a method using grafting-from ring-opening metathesis polymerization (ROMP) under physiological conditions to integrate norbornene-derived polymers into live plants by spray coating. The approach involves creating biological macroinitiators on leaf surfaces, which enable subsequent polymerization of norbornene-derived monomers. Characterization techniques, including FTIR spectroscopy, SEM EDS imaging, ICP-MS, nanoindentation, and XPS, confirmed the presence and characterized the properties of the polymeric layers on leaves. The demonstrated modifiability and biocompatibility could offer the potential to maintain plant health in various applications, including the development of thermal barriers, biosensors, and crop protection layers.

New Polymeric Hydrogels with Cannabidiol and α-Terpineol as Potential Materials for Skin Regeneration-Synthesis and Physicochemical and Biological Characterization.

Dermatology and cosmetology currently prioritize healthy, youthful-looking skin. As a result, research is being conducted worldwide to uncover natural substances and carriers that allow for controlled release, which could aid in the battle against a variety of skin illnesses and slow the aging process. This study examined the biological and physicochemical features of novel hydrogels containing cannabidiol (CBD) and α-terpineol (TER). The hydrogels were obtained from ε-caprolactone (CL) and poly(ethylene glycol) (PEG) copolymers, diethylene glycol (DEG), poly(tetrahydrofuran) (PTHF), 1,6-diisocyanatohexane (HDI), and chitosan (CHT) components, whereas the biodegradable oligomers were synthesized using the enzyme ring-opening polymerization (e-ROP) method. The in vitro release rate of the active compounds from the hydrogels was characterized by mainly first-order kinetics, without a "burst release". The antimicrobial, anti-inflammatory, cytotoxic, antioxidant, and anti-aging qualities of the designed drug delivery systems (DDSs) were evaluated. The findings indicate that the hydrogel carriers that were developed have the ability to scavenge free radicals and impact the activity of antioxidant enzymes while avoiding any negative effects on keratinocytes and fibroblasts. Furthermore, they have anti-inflammatory qualities by impeding protein denaturation as well as the activity of proteinase and lipoxygenase. Additionally, their ability to reduce the multiplication of pathogenic bacteria and inhibit the activity of collagenase and elastase has been demonstrated. Thus, the developed hydrogel carriers may be effective systems for the controlled delivery of CBD, which may become a valuable tool for cosmetologists and dermatologists.

Highly sensitive electrochemical quantification of carbendazim via synergistic enhancement of ring-opening metathesis polymerization and polyethyleneimine modified graphene oxide.

Anovel aptamer-based sensor was developed using the signal amplification strategy of ring-opening metathesis polymerization (ROMP) and polyethyleneimine modified graphene oxide to achieve trace detection of carbendazim (CBZ). The dual identification of aptamer and antibody was used to avoid false positive results and improve the selectivity. Polyethyleneimine modified graphene oxide (GO-PEI), as a substrate material with excellent conductivity, was modified on the surface of aglassy carbon electrode (GCE) to increase the grafting amount of aptamer on the electrode surface. Moreover, a large number of cyclopentenyl ferrocene (CFc) was aggregated to form long polymer chains through ring-opening metathesis polymerization (ROMP), so as to significantly improve the detection sensitivity of the biosensor. The linear range of this sensor was 1 pg/mL-100 ng/mL with a detection limit as low as 7.80fg/mL. The sensorexhibited excellent reproducibility and stability, and also achieved satisfactory results in actual sample detection. The design principle of such a sensor could provide innovative ideas for sensors in the detection of other types of targets.

Glycopolymers Prepared by Alternating Ring-Opening Metathesis Polymerization Provide Access to Distinct, Multivalent Structures for the Probing of Biological Activity.

A myriad of biological processes are facilitated by ligand-receptor interactions. The low affinities of these interactions are typically enhanced by multivalent engagements to promote binding. However, each biological interaction requires a unique display and orientation of ligands. Therefore, the availability and diversity of synthetic multivalent probes are invaluable to the investigation of ligand-receptor binding interactions. Here, we report glycopolymers prepared from bicyclo[4.2.0]oct-6-ene-7-carboxamide and 4,7-dihydro-1,3-dioxepin or cyclohexene. These glycopolymers, synthesized by alternating ring-opening metathesis polymerization, display precise ligand spacing as well as the option of a hydrophobic or acetal-functionalized polymer backbone. Small-angle X-ray scattering (SAXS) data analysis revealed that these [4.2.0] glycopolymers adopted distinct conformations in solution. In aqueous media, [4.2.0]-dioxepin glycopolymers formed swollen polymer chains with rod-like, flexible structures while [4.2.0]-cyclohexene glycopolymers assumed compact, globular structures. To illustrate how these glycopolymers could aid in the exploration of ligand-receptor interactions, we incorporated the [4.2.0] glycopolymers into a biological assay to assess their potential as activators of acrosomal exocytosis (AE) in mouse sperm. The results of the biological assay confirmed that the differing structures of the [4.2.0] glycopolymers would evoke distinct biological responses; [4.2.0]-cyclohexene glycopolymers induced AE in mouse sperm while [4.2.0]-dioxepin glycopolymers did not. Herein, we provide two options for glycopolymers with low to moderate molecular weight dispersities and low cytotoxicity that can be implemented into biological assays based on the desired hydrophobicity, rigidity, and structural conformation of the polymer probe.

Insights into the Distinct Behaviors between Bifunctional and Binary Organoborane Catalysts through Terpolymerization of Epoxide, CO2, and Anhydride.

Alkyl borane compounds-mediated polymerizations have expanded to Lewis pair polymerization, free radical polymerization, ionic ring-opening polymerization, and polyhomologation. The bifunctional organoborane catalysts that contain the Lewis acid and ammonium or phosphonium salt in one molecule have demonstrated superior catalytic performance for ring-opening polymerization of epoxides and ring-opening copolymerization of epoxides and CO2 than their two-component analogues, i.e., the blend of organoborane and ammonium or phosphonium salt. To explore the origin of the differences of the one-component and two-component organoborane catalysts, here we conducted a systematic investigation on the catalytic performances of these two kinds of organoborane catalysts via terpolymerization of epoxide, carbon dioxide and anhydride. The resultant terpolymers produced independently by bifunctional and binary organoborane catalyst exhibited distinct microstructures, where a series of gradient polyester-polycarbonate terpolymers with varying polyester content were afforded using the bifunctional catalyst, while tapering diblock terpolymers were obtained using the binary system. The bifunctional catalyst enhances the competitiveness of CO2 insertion than anhydride, which leads to the premature incorporation of CO2 into the polymer chains and ultimately results in the formation of gradient terpolymers. DFT calculations revealed the role of electrostatic interaction and charge distribution caused by intramolecular synergistic effect for bifunctional organoborane catalyst.

Thermally Stable and Chemically Recyclable Poly(ketal-ester)s Regulated by Floor Temperature.

Chemical recycling to monomers (CRM) offers a promising closed-loop approach to transition from current linear plastic economy toward a more sustainable circular paradigm. Typically, this approach has focused on modulating the ceiling temperature (Tc) of monomers. Despite considerable advancements, polymers with low Tc often face challenges such as inadequate thermal stability, exemplified by poly(γ-butyrolactone) (PGBL) with a decomposition temperature of ∼200 °C. In contrast, floor temperature (Tf)-regulated polymers, particularly those synthesized via the ring-opening polymerization (ROP) of macrolactones, inherently exhibit enhanced thermodynamic stability as the temperature increases. However, the development of those Tf regulated chemically recyclable polymers remains relatively underexplored. In this context, by judicious design and efficient synthesis of a biobased macrocyclic diester monomer (HOD), we developed a type of Tf -regulated closed-loop chemically recyclable poly(ketal-ester) (PHOD). First, the entropy-driven ROP of HOD generated high-molar mass PHOD with exceptional thermal stability with a Td,5% reaching up to 353 °C. Notably, it maintains a high Td,5% of 345 °C even without removing the polymerization catalyst. This contrasts markedly with PGBL, which spontaneously depolymerizes back to the monomer above its Tc in the presence of catalyst. Second, PHOD displays outstanding closed-loop chemical recyclability at room temperature within just 1 min with tBuOK. Finally, copolymerization of pentadecanolide (PDL) with HOD generated high-performance copolymers (PHOD-co-PPDL) with tunable mechanical properties and chemical recyclability of both components.

Well-Tailored Norbornene-Based Fluorinated Copolymers toward Modulating Icephobicity and Mechanical Robustness.

Well-tailored construction of icephobic surfaces with mechanical robustness and investigation of the structure-property relationships at the molecular level are highly desirable. Herein, a series of norbornene-based fluorinated polyolefin copolymers (FPOR-x) with varying norbornenyl dodecafluoroheptyl ester (NDFHE) molar fractions (0-100 mol %) were well-designed and fabricated via living ring-opening metathesis polymerization (ROMP) employing NDFHE and norbornenyl pentafluorophenyl ester (NPFPE) as the soft and hard segments, respectively. The mechanical and icephobic properties of the fluorinated copolymers can be regulated by adjusting the soft NDFHE contents. As a result, the well-designed norbornene-based copolymers exhibited a wide range of tunable mechanical properties, including tensile strength ranging from 0.2 to 26.4 MPa, elastic modulus ranging from 0.6 to 593.7 MPa, and breaking elongations ranging from 5718.7% to 3.7%, correlating with the proportion of soft NDFHE content. Furthermore, the synergistic interplay between soft and hard segments, particularly the hardness in the majority and softness in the minority or vice versa, could achieve a significant difference in the local modulus and enhance the propagations of cracks within the three-phase regions (soft regions/hard regions/ice), ultimately leading to a significant reduction in ice shear strength. Notably, FPOR-25% with a tensile strength of 12.0 MPa and an elastic modulus of 227.5 MPa exhibited a remarkably low ice shear strength of 57.7 kPa. This study not only highlights the relationship between the polymer molecular structure and surface icephobic properties but also breaks the limitations of icephobic surfaces with a low modulus.

Efficient Catalyst-Free One-Pot Synthesis of Polysaccharide-Polypeptide Hydrogels in Aqueous Solution.

The preparation of polysaccharide-peptide hydrogels usually involves multiple synthetic steps, thus reducing the effectiveness and practicality of these approaches. Inspired by recent discoveries in aqueous N-carboxyanhydride (NCA) ring-opening polymerization (ROP) and ring-opening polymerization-induced nanogelation, we present an aqueous one-pot strategy to prepare polysaccharide-polypeptide hydrogels. In this study, water-soluble polysaccharide carboxymethyl chitosan is used as the macromolecular initiator to prepare polysaccharide-polypeptide copolymers through the aqueous ROP of NCA. The catalyst-free approach afforded hydrogels with properties that could be controlled by adjusting the type and amount of NCA used, with the elastic modulus ranging from 50 Pa to 18000 Pa. The hydrogen bond-cross-linked hydrogel exhibited self-healing and injectable properties. Morphology characterization revealed that micelles were formed in the early stage of reaction, suggesting that the polymerization follows an aqueous ring-opening polymerization-induced self-assembly (ROPISA) mechanism and that aggregation of micelles during the reaction caused the gelation. Moreover, the hydrogels displayed high swelling ratios (>95% water content), and hemolysis and cytotoxicity experiments demonstrated that the hydrogels had excellent biocompatibility, indicating their potential in medical applications.

Supersoft Norbornene-Based Thermoplastic Elastomers with High Strength and Upper Service Temperature.

With over 6 million tons produced annually, thermoplastic elastomers (TPEs) have become ubiquitous in modern society, due to their unique combination of elasticity, toughness, and reprocessability. Nevertheless, industrial TPEs display a tradeoff between softness and strength, along with low upper service temperatures, typically ≤100°C. This limits their utility, such as in bio-interfacial applications where supersoft deformation is required in tandem with strength, in addition to applications that require thermal stability (e.g., encapsulation of electronics, seals/joints for aeronautics, protective clothing for firefighting, and biomedical devices that can be subjected to steam sterilization). Thus, combining softness, strength, and high thermal resistance into a single versatile TPE has remained an unmet opportunity. Through de novo design and synthesis of novel norbornene-based ABA triblock copolymers, this gap is filled. Ring-opening metathesis polymerization is employed to prepare TPEs with an unprecedented combination of properties, including skin-like moduli (<100kPa), strength competitive with commercial TPEs (>5MPa), and upper service temperatures akin to high-performance plastics (≈260°C). Furthermore, the materials are elastic, tough, reprocessable, and shelf stable (≥2 months) without incorporation of plasticizer. Structure-property relationships identified herein inform development of next-generation TPEs that are both biologically soft yet thermomechanically durable.

Polybenzoxazines containing borosiloxane structures as high-temperature resistance (T g > 300 °C) and environment-friendly flame-retardant materials

A series of borosiloxane structures-containing polybenzoxazines (PBZs) with intrinsic environment-friendly flame-retardant properties and high-temperature resistance are investigated in this study. Initially, borosiloxane structures-containing benzoxazine macromonomers (BZ-BSiO-X) were synthesized through a condensation reaction between silicon ethoxy groups-containing benzoxazine monomers (P-mdes), boric acid (BA) and diphenyldimethoxysilane (DPDMS) with varying feed ratios. Subsequently, the benzoxazine groups in BZ-BSiO-X underwent ring-opening polymerization at elevated temperatures to produce poly(BZ-BSiO-X). The properties of poly(BZ-BSiO-X) were evaluated using Dynamic Mechanical Analysis, Thermogravimetric Analysis and an Oxygen Index instrument. The results show that the heat resistance of poly(BZ-BSiO-X) is enhanced by the cross-linking structures formed by the P-mdes segment and B-N coordination interaction, leading to their glass transition temperatures (T g, tan δ) exceeding 300 °C. The thermal stability and flame-retardant properties of poly(BZ-BSiO-X) are reinforced via the borosiloxane structures formed through DPDMS and BA, resulting in a 5% weight loss temperatures (T d5) around 400 °C and limiting oxygen index (LOI) values above 30. These polymers, containing environment-friendly flame-retardant boron (B) and silicon (Si) elements, exhibit potential as alternatives to halogen- or phosphorus-containing flame-retardant materials and are expected to be used in various fields as environment-friendly flame-retardant materials.

Monomer-Recyclable Polyester from CO2 and 1,3-Butadiene.

Synthesis of monomer-recyclable polyesters solely from CO2 and bulk olefins holds great potential in significantly reducing CO2 emissions and addressing the issue of plastic pollution. Due to the kinetic disadvantage of direct copolymerization of CO2 and bulk olefins compared to homopolymerization of bulk olefins, considerable research attention has been devoted to synthesis of polyester via the ring-opening polymerization (ROP) of a six-membered disubstituted lactone intermediate, 1,2-ethylidene-6-vinyl-tetrahydro-2H-pyran-2-one (𝜹-L), obtained from telomerization of CO2 and 1,3-butadiene. However, the conjugate olefin on the six-membered ring of 𝜹-L leads to serious Michael addition side reactions. Thus, the selective ROP of 𝜹-L, which can precisely control the repeating unit for the production of polyesters potentially amenable to efficient monomer recycling, remains an unresolved challenge. Herein, the first example of selective ROP of 𝜹-L is reported using a combination of organobase and N,N'-Bis[3,5-bis(trifluoromethyl)phenyl]urea as the catalytic system. Systematic modifications of the substituent of the urea show that the presence of electron-deficient 3,5-bis(trifluoromethyl)-phenyl groups is the key to the extraordinary selectivity of ring opening over Michael addition. Efficient monomer recovery of oligo(𝜹-L) is also achieved under mild catalytic conditions.

Novel catalyst-solvent system for high molecular weight polylactic acid synthesis via azeotropic solution polycondensation method

ABSTRACT Polycondensation for PLA synthesis is widely used due to its cost-effectiveness, but it often leads to low molecular weight PLA. To address this limitation, researchers have explored different catalysts, with the stannous chloride and p-toluene sulfonic acid combination being a popular choice. However, this method typically yields PLA with a MW of no more than 35000 g/mol, which is unsuitable for commercial applications. In contrast, ring-opening polymerization is considered the most effective method for synthesizing high MW PLA, despite its complexity and cost. Industrial-scale production predominantly employs ROP due to its capability to produce high MW PLA. The use of stannous octoate as a catalyst for ROP has shown promise in synthesizing higher MW PLA. However, its sensitivity to water limits its use in polycondensation, where stannous chloride is commonly employed but is not capable of synthesizing high MW PLA. This study explores the use of stannous octoate for the synthesis of high MW PLA with higher yield.

N-Butyltin(IV) trichloride initiator for the solvent-free ring-opening polymerization of ε-caprolactone: evaluation of the structure-reactivity relationship of tin(IV) derivatives

n-Butyltin(IV) trichloride initiator for the solvent-free ring-opening polymerization of ε-caprolactone: evaluation of the structure-reactivity relationship of tin(IV) derivatives

Synthesis and Characterization of Graft Copolymers with Poly(ε-caprolactone) Side Chain Using Hydroxylated Poly(β-myrcene-co-α-methyl styrene).

Graft copolymers have unique application scenarios in the field of high-performance thermoplastic elastomers, resins and rubbers. β-myrcene (My) is a biomass monomer derived from renewable plant resources, and its homopolymer has a low glass transition temperature and high elasticity. In this work, a series of tapered copolymers P(My-co-AMS)k (k = 1, 2, 3) were first synthesized in cyclohexane by one-pot anionic polymerization of My and α-methyl styrene (AMS) using sec-BuLi as the initiator. PAMS chain would fracture when heated at high temperature and could endow the copolymer with thermal degradation property. The effect of the incorporation of AMS unit on the thermal stability and glass transition temperature of polymyrcene main chain was studied. Subsequently, the double bonds in the linear copolymers were partially epoxidized and hydroxylated into hydroxyl groups to obtain hydroxylated copolymer, which was finally used to initiate the ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) to synthesize the graft copolymer with PCL as the side chain. All these copolymers before and after modifications were characterized by proton nuclear magnetic resonance (1H NMR), gel permeation chromatography (GPC), thermogravimetry analysis (TGA), and differential scanning calorimeter (DSC).

Chemically recyclable rosin-based polymers

The pursuit of next-generation sustainable polymers with chemical recyclability and resource renewability has become a priority in materials science. Rosin, a widely available renewable natural biomass, holds promise in this regard. In this study, dehydroabietic acid was incorporated into a cyclooctene monomer structure as pendant groups. This tailored monomer with low ring strain possesses the ability to efficiently undergo ring-opening metathesis polymerization (ROMP), resulting in the synthesis of rosin-based unsaturated polymers with a fully hydrocarbon backbone. The molecular weight of these polymers, ranging from 50 kDa to 160 kDa, can be easily modulated by varying the monomer-to-catalyst feeding ratio. Remarkably, these amorphous polymers exhibit exceptional thermostability, with a decomposition temperature exceeding 400 °C. This type of polymer exhibits excellent acid and alkali resistance within a pH range of 3 to 11. Upon exposure to Grubbs catalyst under mild conditions, these polymers undergo depolymerization back to the native monomer in a highly efficient manner, achieving a remarkable recovery ratio of approximately 95 %. It is evident that this innovative approach is not only relevant for the development of rosin-based polymers but also holds promise for informing the design of other renewable polymers with superior thermostability and enhanced chemical recyclability.

(Z)-N-(pyridin-2-yl)benzimidate dimethylaluminum complexes: synthesis, structures and ring-opening polymerization of ε-caprolactone

The easy synthesis and characterization of three new N,O-coordination aluminum complexes (Al1-Al3) bearing (Z)-N-(pyridin-2-yl)benzimidate ligand are presented, as well as their ring-opening polymerization (ROP) of ε-caprolactone (ε-CL). The three aluminum complexes were simply synthesized by single-step reactions of unsubstituted and substituted N-(pyridin-2-yl)benzamides (RC5H4N)NHCOC6H5 (R = H, 1; R = 5-Me, 2; R = 6-Me, 3) with AlMe3; The reactions involved the tautomerization of the original N-(pyridin-2-yl)amide ligands to (Z)-configurational N-(pyridin-2-yl)imidates which acts as N,O-bidentate ligands. Molecular structures of the three obtained aluminum complexes were determined by NMR spectroscopy, single-crystal X-Ray diffraction and elemental analysis. The aluminum complexes (Al1-Al3) were found to catalyze the ring-opening polymerization of ε-caprolactone with moderate activities. The GPC test showed that the produced polycaprolactones with narrow molecular weight distributions (Mw/Mn < 1.14) when the polymerization time within 25 min. For the present system, the introduction of electron-donating methyl substituents at the pyridine ring of the ligand resulted in an apparent increase in catalytic activity. Particularly, among the three investigated aluminum complexes, Al3 showed the highest activity up to 99% conversion rate with [CL]0/[Al]0/[BnOH]0 = 100/1/1 at 80°C for 25 min.

Ring-opening polymerization of six-membered cyclic hybrid dimers composed of an oxoester and thioester

Three cyclic oxoester-thioester hybrid monomers, 1 (3-methyl-1,4-oxathiane-2,5-dione), 2 (6-methyl-1,4-oxathiane-2,5-dione), and 3 (3,6-dimethyl-1,4-oxathiane-2,5-dione), were studied for anionic and cationic ring-opening polymerizations. These monomers are six-membered cyclic cross-dimers corresponding to combinations of glycolic and lactic acids with their thiol analogs. Anionic polymerizations using thiol as the initiator and 2,6-lutidine as the base catalyst were successful for the chemoselective cleavage of the thioester with the thiol propagating end. The polymerizability increased in the order of 3 < 1 < 2, which was in good agreement with the increasing ring strain order evaluated by Density Functional Theory calculations. The living character, to some extent, was suggested by the postpolymerization reactions, which involved a two-stage feed of the monomers and a thiol-ene terminal coupling reaction to form a block copolymer with PEG. Additionally, it was found that the polymerization took place in 2,6-lutidine without a thiol initiator and produced macrocyclic polymers. The cationic polymerizations took place with the aid of CF3SO3H and benzyl alcohol but involved side reactions with low chemoselective ring cleavage. The thioester unit caused the polymers to exhibit a lower Tg with greater thermal and photo degradability.

Biobased partially crosslinked polyβ-hydroxyesters synthesized from low-melt carboxyl-polyamides and a dicyclocarbonate

A new kind of biobased partially crosslinked polyβ-hydroxyesters (cPHEs) was synthesized through the ring-opening polymerization of a five-membered dicyclocarbonate and carboxyl-terminated dimer acid (DA) oligopolyamides (DAPAcs). The DAPAcs provided carboxyl groups and attacked the cyclocarbonate groups to form β-hydroxyester units, which was confirmed by a model reaction. DAPAcs were synthesized from hexamethylenediamine and excess DA. Their structure and properties were confirmed by FTIR, 1H NMR, and DSC. cPHEs exhibited semicrystalline characters with good thermal properties evidenced by wide-angle X-ray scattering, DSC, and TGA. Introducing DAPA sequences improved intermolecular interactions and tensile strength. The attack of pendent hydroxy groups to remaining cyclocarbonate groups led to crosslinked cPHEs. Dynamic β-hydroxylester segments impart the reprocessability of cPHEs, and stress relaxation experiments were conducted at different temperatures to evaluate the exchange kinetics. A new synthetic route different from normal epoxy-carboxyl route was established. This method broadens the research of polyβ-hydroxylesters and their application range.