Ring Density Research Articles

A method for estimating tree ring density by coupling CT scanning and ring width measurements: application to the analysis of the ring width–ring density relationship in Picea abies trees

A method for estimating tree ring density by coupling CT scanning and ring width measurements: application to the analysis of the ring width–ring density relationship in Picea abies trees

Regional, Site, and Tree Variations of Wood Density and Growth in Thuja occidentalis L. in the Quebec Forest

Thuja occidentalis L. wood is desirabl, e for wooden structures that require wood density uniformity. Wood density is a wood quality indicator related to numerous morphological, mechanical, physiological, and ecological properties. This study aimed to investigate the regional, site, and tree-to-tree variations of T. occidentalis wood density and growth components through the analysis of X-ray densitometer data. A total of 287 trees were randomly sampled from 11 sites in the Abitibi-Témiscamingue regions in Québec, Canada. The average ring density at breast height was 356 kg m−3, with a small difference between earlywood and latewood (167 kg m−3), indicating a relatively uniform wood. Ring density and width varied significantly between the Abitibi and the Témiscamingue regions, mainly in the juvenile wood. Trees from the Abitibi region showed higher ring density than those in the Témiscamingue region. In contrast, the ring width was higher in the Témiscamingue region. Site, tree, and cambial age significantly (p < 0.001) affected wood density and growth components. However, the largest variation is due to the tree-to-tree variation, accounting for about 15%–31% of the total variation. Compared to ring widths, ring density components showed a considerably smaller tree-to-tree variation and higher variation (7.1%) with cambial age than ring widths (0.6%). Ring width correlated positively and significantly (p < 0.001) with average temperature and annual precipitation, while ring density correlated negatively and significantly (p < 0.001) with average temperature and annual precipitation.

Sustainable Construction—Technological Aspects of Ecological Wooden Buildings

Wooden construction constitutes a specific branch of the building industry that focuses on high-quality materials, a developed sense of aesthetics connected with comfort and functionality, and concern for ecology and durability. This type of construction has a positive effect on human quality of life. This article focuses on modular frame construction and technological aspects of wooden houses built according to Canadian or Scandinavian technologies. Taking weather conditions of Scandinavian countries into consideration, timber is a popular building material, which, when preserving certain parameters such as density of rings, may provide durability of a modular wooden building even up to 200–300 years. This article is a review and presents the possibility of producing frame buildings in Europe (Poland) in accordance with the applicable standards, including a heat transfer coefficient U = 2 [W/(m²·K]. In Poland, wooden frame buildings can be traced back to the 14th century. Wooden frame buildings and modular wooden frame buildings were produced even earlier in Norway. Wooden construction continued in the mid-1800s in various forms (with wooden filling and/or panels). In the mid-1900s (1941), certain dimensioning became regulated by law, which then applied to different types of insulation fillings. Prefabricated modular wood frame houses were common in the 1960s.

Interheteromolecular Hyperconjugation Boosts (De)hydrogenation for Reversible H2 Storage.

Interheteromolecular hyperconjugation is ubiquitous in organic systems, affecting bond length, dipole moments, conformations and so on, while its effect on (de)hydrogenation reactivity in a heterogeneous thermo-catalytic system has rarely been explored. Herein, the N-heterocycles containing a benzene ring and aliphatic chain [N-ethylcarbazole (NEC) and N-propylcarbazole (NPC)] were utilized to study the correlation between interheteromolecular hyperconjugation and catalytic (de)hydrogenation. Density functional theory calculations, variable-temperature 1 H nuclear magnetic resonance spectroscopy, and catalytic experiments showed that the presented hyperconjugation between NEC and NPC weakened the electron cloud density of aromatic rings and thus facilitated the reactivity with hydrogen featuring unpaired electrons. Therefore, an extremely low temperature of 80 °C was enough for the hydrogenation. Moreover, this interheteromolecular hyperconjugation was general in other N-heterocycles (e. g., N-methyindole and NPC) and was also effective to (de)deuterate as revealed by isotope experiments. This work expands the application of interheteromolecular hyperconjugation to heterogeneous thermocatalysis for reversible H2 storage.

Influence of Four Spacings between Trees and Four Samplings Heights on Selected Wood Quality Attributes of White Spruce (Picea glauca (Moench) Voss)

Four Picea glauca (Moench) Voss trees grown at each of four square spacing intensities between trees: 1.2 m, 1.8 m, 4.3 m, and 6.1 m in a plantation established in 1967 in the Petawawa Research Forest, Ontario, Canada (lat. 45.59° N, long. 77.25° W, elev. 168 m) and sampled at four different heights (1.3 m, 4.3 m, 7.3 m, 10.3 m) were used to study the impact of spacing between trees and sampling height on nine wood quality attributes (ring width, ring density, tracheid length, tracheid diameter, latewood proportion, intra-ring density variation, ring area, earlywood width, and latewood width). In the juvenile wood, ring width was wider and ring density higher than in the mature wood. Tracheid length was longer and tracheid diameter wider in the mature wood compared to the juvenile wood. The variation of ring density between the two wood zones was limited, and latewood proportion did not show any difference with wood zone. Sampling height induced variation in more wood quality attributes than did spacing. Except for growth rate, spacing between trees did not significantly impact wood quality attributes. Most of these variations were registered between widely different spacings.

Componentes de los anillos de crecimiento de Pinus hartwegii Lindl. en los extremos de su distribución altitudinal en el centro-oriente de México

Introduction: Climate change will have a differential impact on mountain forest growth linked to elevation. Objective: To evaluate the interrelationships of growth ring components at altitudinal gradient limits of Pinus hartwegii Lindl. in three mountains of east-central Mexico. Materials and methods: We analyzed 295 tree samples from Cofre de Perote, Pico de Orizaba and Monte Tláloc corresponding to the period 1960-2017 with a total of 17 700 observations per variable (ring width and density [TRW, TRD], earlywood [EWW, EWD], latewood [LWW, LWD] and minimum and maximum density [MID, MAD]). Results and discussion: Growth parameters were higher at the lower limit (≈3 500 m). The correlation of TRW with EWW (r ≥ 0.95) and LWW (r ≥ 0.78) was significant (P < 0.05). TRD correlated with EWD (r ≥ 0.83) and MID (r ≥ 0.72), as well as EWD with MID (r ≥ 0.92) and LWD with MAD (r ≥ 0.92). At the upper limit (≈4 000 m), correlations of TRW, EWW and LWW with TRD, EWD and MID were negative (-0.3 ≥ r ≥ -0.8). This may be explained by lower temperatures and growth periods reducing the relative importance of latewood in ring width. Conclusions: The information provided contributes to understand the dynamics of P. h ar t we g ii xylogenesis in response to climate and possible implications for radial growth facing climate change.

Warming effects on tree-ring variables in P. hartwegii Lindl. at the extremes of its natural elevational distribution in central Mexico

In alpine forests, the impact of warming differs at the upper and lower extremes of the elevation gradient causing trees to compensate through different adaptive mechanisms. The objective was to retrospectively evaluate the radial growth response to recent interannual climate variation in Pinus hartwegii trees growing at the extremes of their elevational gradient on two volcanic mountains in central Mexico (La Malinche and Nevado de Toluca). Increment cores collected from 174 P. hartwegii trees were used to estimate time-series of growth ring including ring width and density variables, as well as basal area increment (BAI) and ring biomass (BIO) for 1964–2016. Differences in average radial growth and time-trends of ring variables in response to climate variables were estimated based on correlations of ring variables, BAI, and BIO with inter-annual variation in temperature, rainfall, and length of the frost-free period (FFP). Results showed higher average values of ring width and density variables, as well as BAI and BIO (i.e., higher productivity) at low elevation on both mountains. Time-trends for BAI and BIO were positive at both ends of the elevation gradient, but ring width and density variables followed opposite trends. Inter-annual variation of ring variables was explained more by temperature than by rainfall or FFP; however, temperature was negatively correlated with RW and positively with RD, even though BAI and BIO were positively correlated with temperature (All them with P < 0.001) at both elevational end on both mountains. For most of the ring variables, the total variation explained by the ANOVA model was more related to the linear warming trend (greater than 67%). Warming is affecting radial growth of P. hartwegii trees differently at high versus low elevation on both mountains, showing warning signs from the perspective of functional traits, but not in terms of productivity.

Evaluation of Ring Amplitude and Factors Affecting Ring Amplitude in Multifocal Electroretinography in Diabetic Eyes

ABSTRACTPurposeThe aim of this paper was to evaluate the ring amplitudes in diabetic patients and to evaluate the effect of the risk factors for diabetic retinopathy on the ring amplitudes. We also aimed to investigate the success of ring amplitudes in classifying diabetic retinopathy.MethodsThe study included 32 eyes of 32 diabetic patients without retinopathy (DM), 34 eyes of 34 patients with mild non-proliferative diabetic retinopathy (NPDR) without macular edema, and 62 eyes of 62 age- and sex-matched controls (CG). All subjects were evaluated using mfERG. The relationship between age, diabetes duration, HbA1c and ring amplitudes and the effect of diabetes and hypertension on ring amplitudes were evaluated. Three-way ROC analysis was performed to evaluate the discrimination power of the ring amplitudes.ResultsIn the comparison of the ring amplitudes, the amplitudes of the DM and NPDR groups were statistically significantly decreased compared to the CG (p < .05). A moderate to strong correlation was found between the duration of diabetes, HbA1c and ring amplitudes (p < .05). The effect of diabetes decreased towards the peripheral rings and hypertension did not affect ring amplitudes. Volume under the ROC surface of R1 = 0.65 had p < .05 and 95% CI [0.50–0.72], and the best cut-off point pair to differentiate the three classes was found to be c1 = 217.3, c2 = 151.2 in three-way ROC analysis.ConclusionIn conclusion, the effects of diabetes are unevenly distributed on the retina topographically. Diabetes affects the central rings more than peripheral rings in multifocal ERG. Both ring densities and ring ratios are effective ways to identify early changes in retinal function.

Effect of potentiated cryopreserved mesenchymal stem cells in intervertebral disc repair

The aim of the study was to investigate the effect of cryopreserved mesenchymal stem cells (CrMSCs) from different tissue (bone marrow, adipose tissue, cartilage) potentiated with some growth and differentiation factors (TGFβ and bFGF) on intervertebral disc (IVD) cartilage repair using compression model of degenerative damage. In the group with self-healing histological changes in IVD cartilage tissue were pronounced. Administration of untreated CrMSCs (regardless of their origin) regenerated IVD structure up to a moderate degree on the 45th day. After therapy with TGFβ-potentiated cells, the histological structure of the disc remained similar to untreated CrMSC influence, which according to the integrated semi-quantitative scale corresponded to moderate degenerative changes. Whereas, the administration of bFGF-potentiated cells contributed to the restoration of the disc structure up to a mild degree of histological damages. In the latter case, there was an increase in cellularity of the fibrous ring, regeneration of cracks and gaps, and restoration of collagen febrile structure in annulus fibrosus on the 45th day after therapy. At the same time, the average cell density of fibrous rings increased by 1.35, 1.50, and 1.39 times and IVD height grew by 1.33, 1.36, and 1.37 times for bone marrow-, adipose- and cartilage-derived CrMSC of potentiated by bFGF respectively compared to untreated analog. Thus, administration of CrMSCs from all studied sources activates regenerative processes in degenerated intervertebral discs of rats, the rate of which increases using of bFGF-potentiated cells.

Effects of climate on the tree ring density and weight of Betula ermanii in a cool temperate forest in central Japan

Effects of climate on the tree ring density and weight of Betula ermanii in a cool temperate forest in central Japan

Variation in Growth, Wood Density, and Stem Taper Along the Stem in Self-Thinning Stands of Sassafras tzumu.

Silvicultural practices greatly improve the economic value of wood products from forests. Stem dimensions, wood density, and stem form are closely linked to end-product performance. This research aimed to examine the effects of stand density and stem height on variables that reflect ring growth and wood properties of Sassafras tzumu stands during the self-thinning phase. Between the ages of 10 and 40 years, the number of stems per hectare has declined from 1,068 to 964 due to density-dependent mortality. As the relative stand density decreased, there were significant reductions in the average tree ring width (5.07–3.51 mm) and increases in latewood proportions (49.88–53.49%) and the density of the annual growth ring (165.60–708.58 kg/m3). Therefore, ring density, earlywood density, and latewood density increased with decreasing relative stand density after self-thinning occurred. Ring width, earlywood width, and latewood width significantly increased from the base to the apex of the stem. Stand density and stem height had additive effects on S. tzumu wood properties during the self-thinning phase. A shift in the growth allocation along the longitudinal stem in response to self-thinning resulted in decreasing radial growth, increasing wood density, and improved stem form. In summary, we found a significant influence of stand density on tree ring growth, wood quality, and stem form of S. tzumu trees during the self-thinning phase.

Marked Sensitivity of Ultimate Elongation to Loading Axiality in Polyrotaxane Gels with Largely Slidable Cross Links.

Polyrotaxane (PR) gels with low ring densities have figure-of-eight cross links that can slide along network strands. The slidable cross links have a unique ability to increase the network strand length between adjacent cross links in the loading direction via chain supply from the stress-free direction, thereby enhancing the ultimate elongation (λm) of the gels. We reveal that this enhancement of λm due to the slidable cross links is pronounced specifically in uniaxial stretching, while it is considerably modest in biaxial stretching. The sensitivity of λm to loading axiality becomes larger as the ring densities decrease. The corresponding difference in λm is markedly larger for the PR gels with low ring densities than that for the networks with fixed cross links. The exceptional sensitivity of λm to loading axiality unveils a previously unidentified aspect of the chain-supply mechanism based on slidable cross links.

Influencing Factors in Acoustic Emission Detection: A Literature Review Focusing on Grain Angle and High/Low Tree Ring Density of Scots Pine

Among non-destructive testing (NDT) techniques applied to structural health monitoring in existing timber structures, ranging from visual inspection to more sophisticated analysis, acoustic emission (AE) is currently seldomly used to detect mechanical stresses in wooden building assets. This paper presents the results from a systematic literature review on AE NDT applied to monitor micro and macro fracture events in softwood, specifically Scots pine. This survey particularly investigates its application with respect to the tree rings density and grain angle inspection, as influencing factors well correlated with physical and mechanical characteristics of wood. The literature review was performed in a three-step process defined by the PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) flow diagram, leading to the selection of 31 documents from different abstract and citation databases (Scopus, Web of Science and Google Scholar). The outcomes have highlighted how laboratory experiments, including several types of tests (tensile, cutting, compressive, etc.), were conducted in most cases, while a very limited number of studies investigated on in situ monitoring. In addition, theoretical approaches were often explored in parallel with the experimental one. It emerges that—for tree ring density studies—a multi-technique approach, which may include microscopic observations, could be more informative. Indeed, although not widely investigated, high/low tree ring density and grain angle were found as influencing factors on the AE parameters detected by the sensors, during condition and structural health monitoring experiments.

Influencing Factors in Acoustic Emission Detection: A Literature Review Focusing on Grain Angle and High/Low Tree Ring Density of Scots Pine

Influencing Factors in Acoustic Emission Detection: A Literature Review Focusing on Grain Angle and High/Low Tree Ring Density of Scots Pine

Electrical conductivity of nanoring-based transparent conductive films: A mean-field approach

We have studied the electrical conductivity of nanoring-based, transparent conductive films, these being promising elements for flexible electronic devices. Both the wire resistance and the junction resistance were taken into account. We have calculated the dependency of the electrical conductivity on the number density of the rings. We have proposed a mean-field approach to estimate the dependency of the electrical conductivity on the main parameters. Comparison of direct computations of the electrical conductivity and the estimates provided by the mean-field approach evidenced the applicability of this approach for those cases where the wire resistance dominates over the junction resistance and where both resistances are of the same order. For these two cases, both the direct computations and the mean-field approach evidenced a linear dependence of the electrical conductivity of the films on the number density of the conductive rings. By contrast, the dependence of the electrical conductivity on the number density of the conductive rings is quadratic when the junction resistance dominates over the wire resistance. In this case, the mean-field approach significantly overestimates the electrical conductivity since the main assumptions underlying this approach are no longer fulfilled.

Genetic influence on components of wood density variation in white spruce

Abstract Conifer breeding programmes are increasingly selecting for wood quality in addition to growth so to ensure a sufficient flow of high-quality fibre from future forest plantations. As wood density is one of the most frequently used indicators of wood quality, there is a growing interest to consider this trait in selection, and thus enhance the properties of end-use products from planted trees. However, wood density varies at different scales within trees, with pith-to-bark patterns and year-to-year fluctuations representing two important sources of variation. From both physiological and end-use points of view, it is desirable to produce stems with limited pith-to-bark and year-to-year wood density variation. In the present study, we assessed patterns of pith-to-bark and year-to-year variation in 2196 wood density patterns and evaluated the genetic control of traits characterizing this variation. The experimental data came from a 15-year-old white spruce genetic trial representing 93 full-sib families replicated in two contrasting environments in Quebec, Canada. To separate pith-to-bark from year-to-year variation, non-linear models were developed to describe pith-to-bark patterns of variation in the mean ring density (MRD) of individual trees as well as for latewood density (LWD) and latewood proportion. We observed that pith-to-bark variation was more under genetic control than year-to-year variation, for which only LWD and proportion of latewood width to overall ring width reached moderate genetic control. Little genotype-by-environment interaction was observed although wood density patterns differed significantly between sites. The present approach could help identify trees or families that tend to have limited pith-to-bark and year-to-year variation in wood density as part of tree genetic improvement programmes to provide future trees with more uniform and desirable wood attributes.

The utility of bulk wood density for tree-ring research

Bulk wood density measurements are recognized for their utility in ecology, industry, and biomass estimations. In tree-ring research, microdensitometric techniques are widely used, but their ability to determine the correct central tendency has been questioned. Though rarely used, it may be possible to use bulk wood density as a tool to check the accuracy of and even correct microdensitometric measurements. Since measuring bulk wood density in parallel with X-ray densitometry is quickly and easily done, we suspect that its omission is largely due to a lack of awareness of the procedure and/or its importance. In this study, we describe a simple protocol for measuring bulk wood density tailored for tree-ring researchers and demonstrate a few possible applications. To implement real-world examples of the applications, we used a sample of existing X-ray and Blue Intensity (BI) measurements from 127 living and dead Pinus sylvestris trees from northern Sweden to produce new measurements of bulk wood density.We can confirm that the central tendency in this sample material is offset using X-ray densitometry and that the diagnosis and correction of X-ray density is easily done using bulk wood density in linear transfer functions. However, this approach was not suitable for our BI measurements due to heavy discoloration. Nevertheless, we were able to use bulk wood density to diagnose and improve the use of deltaBI (latewood BI – earlywood BI) with regard to its overall trends and multi-centennial variability in a dendroclimatological application. Moreover, we experimented with percent of latewood width, scaled with bulk wood density, as a time- and cost-effective proxy for annual ring density. Although our reconstruction only explains about half of the variation in ring density, it is most likely superior to using fixed literature values of density in allometric equations aimed at biomass estimations.With this study, we hope to raise new awareness regarding the versatility and importance of bulk wood density for dendrochronology by demonstrating its simplicity, relevance, and applicability.

Effect of the structure of wood on the results of ultrasound

In article defined the influence of wood density and angle of annual rings on the deviation angle of the ultrasonic (US) signal (beam) by using the through transmission method of sounding wood. For achieving most-reliable control of glued structures, the requirements for the size of transducers were formulated.

Individual growth in Jack mackerel (Trachurus murphyi) of the Southeastern Pacific Ocean using sagitta otolith weight, daily rings, and annual rings

We estimated the growth of Jack mackerel (Trachurus murphyi) using increments of daily growth, otolith weight and annual ring reading in sagittal otoliths. The daily micro-increments were used to fit ring density to the otolith radius (n = 4481) and then to estimate the age of the individual in days. The parameters of the von Bertalannfy growth equation were: maximum theoretical fork length, FL∞ = 75 cm; individual growth coefficient, K = 0.16 year-1; theoretical age at which fish length is zero, t0= –0.19 years. The growth parameters of T. murphyi estimated using annual rings reading were: K = 0.10 year-1, FL∞ = 74.7 cm, t0 = –0.50 years. The growth parameters estimated using otolith weight were: K = 0.15 year-1, FL∞ = 75.0 cm, t0 = –0.48 years. The parameter K estimated with the daily micro-increments was similar to the K estimated using sagittal otolith weights. We constructed a size-age key for T. murphyi using otolith weight, OW (milligrams) as a variable was: OW= 0.0323*t-15.197 (r2= 0.68). We recommend using otolith weight to estimate age in T. murphyi due to this technique is statistically reliable, but also cheap and fast.

Growth and wood density of Pinus taeda L. as affected by shelterwood harvest in a two-aged stand in Southern Brazil

Pine plantations are an important wood source in Brazil, with Pinus taeda being most frequently planted. Most pinewood is directed to the paper and pulp industry, but there is an increasing demand for wood for solid end-uses, requiring large stems from longer rotations which can be obtained using P. taeda as the canopy in two-aged stands. We evaluated radial growth and wood density at different stem heights of P. taeda in the highlands of Southern Brazil over a production period of 36 years and subjected to shelterwood harvest. Cross-sectional disks were obtained from 15 trees in different stem heights; 10 were used for growth analyses and 5 for growth and density analyses. We used disk images and X-ray techniques for growth and density analyses, respectively. Samples were analyzed for ring (width and density), earlywood, and latewood (width, density, and proportion). Ring width varied between 0.4 and 1.7 cm, with the widest rings in the first years (3–5 years.) of growth. Ring density increased with age, with higher densities on the lower stem portions. Mature wood started to be formed from the 16th ring onwards. Shelterwood harvest affected both ring width and density, but the effects on ring width lasted for at least 5 years, while the effects on wood density were short-lasting. Mature P. taeda trees increased their size after the shelterwood harvest without compromising their wood density. Longer production periods of P. taeda as retained trees in the canopy of two-aged stands provide high-quality wood for structural purposes.