Right-hand Circular Polarization Research Articles

Tunable and strong circular dichroism mediated with graphene-Weyl semimetal planar scheme

Strong circular dichroism (CD) has been observed in Weyl semimetals (WSMs) because of the extremely large gyrotropic optical response. However, traditional proposals cannot tune the wavelength of CD peaks continuously without changing the geometric parameters or external magnetic field, which limits the practical application. This study presents a lithography-free platform exhibits near-unity CD in a WSM-graphene-dielectric structure. It is theoretically shown that the proposal possesses different reflectance properties for right-hand circular polarization and left-hand circular polarization light in the mid-infrared range. The merits of the wide-angular chiral capacity of CP waves can also be maintained. The CD of the chiral structure can be tuned not only by adjusting the structural parameters, but also the chemical potential of graphene, which may also facilitate the design of more efficient chiral optical devices.

Substrate-Integrated Cylindrical Cavity Controlled Hexa-Polarization Flexible Cylindrical Dielectric Resonator Antenna for Ku-Band Applications

A substrate-integrated cylindrical cavity (SICC) fed polarization flexible cylindrical dielectric resonator antenna (CDRA) is presented in this literature. To excite the CDRA, a unique and simple feeding approach based on substrate-integrated waveguide (SIW) technology is demonstrated. This SICC is fed by two 50Ω microstrip lines, oriented orthogonally to each other. The SICC with a cross slot on its top metalized surface and the TM110 mode excites inside it act together to couple energy efficiently to the CDRA. Applying different phase combinations signals at the two input ports of the SICC, the CDRA can radiate in four different orientations linear polarization (LP) (along φ = 0°, 45°, −45°, and 90° ), left-handed circular polarization (LHCP), and right-handed circular polarization (RHCP). A conventional cylindrical dielectric resonator having relative permittivity ϵd = 10 is preferred. Its diameter, height, and cross-slot dimensions are optimized to operate the CDRA over Ku-band with 12% impedance bandwidth, 2-dB axial ratio (AR) bandwidth of 11%, and 3-dB gain bandwidth of 12%. In this operating band, CDRA resonates at three different higher-order modes (HEM32δ, HEM113, and HEM12δ+2) with 8 ± 1.6 dBi/dBic gain for all the polarization states. The measurements of this antenna are conducted using two external phase shifters and one power divider.

A tunable versatile metasurface in terahertz frequency based on graphene–metal hybrid structures

The increasing demands for device integration and reusability have led to the development of freely switchable and dynamically tunable diverse functions in both modern optics and wireless communications. This study proposes a versatile metasurface that integrates with four tunable functions in the terahertz region based on graphene patch and metal split-ring hybrid structures. By adjusting the Fermi level of the graphene patches through electrostatic gating, the proposed metasurface can effectively achieve free switching among four different functions and dynamic tuning of each function's characteristics over a broad frequency band. Moreover, the metasurface operates smoothly in reflection mode for x-polarization, y-polarization, and left-hand and right-hand circular polarization illuminations. All expected performances, including resonant absorption with tunable frequency (relative bandwidth is about 20 %) and regulable absorbance (from 10 % to 100 %), arbitrary interconversion of four polarization states (relative bandwidth is over 48 %), regulation of cross-polarization conversion rate (from 0 % to 100 %), tunable spatial power division (three-way outputs), and dual-channel high-efficiency signal modulation (modulation depth is over 81 %), are demonstrated through full-wave simulation experiments. This study opens up a new avenue for exploring tunable multifunctional integrated devices with graphene materials, with potential applications in various domains, such as wireless communication, terahertz sensing, and imaging.

Design of dual mode antenna using CMA and broadband dual-polarized antenna for 5G networks

This article proposes a dual mode dual-polarized antenna configuration for IRNSS and fifth generation (5G) applications, operating at a frequency of 3.5 GHz based on characteristic mode analysis (CMA), and aims to provide broadband dual-polarized functionality. The original design of the antenna is a traditional patch antenna, and its dual-polarized features are determined using characteristic mode analysis. The full-wave method is used to stimulate both orthogonal modes using a 50 Ω coaxial input line at 3.5 GHz. In this design, the circular patch has been extended into an elliptical patch through a process of mode separation. The circular patch exhibits resonance at a frequency of 2.5 GHz, whereas the extended elliptical radiator demonstrates two resonance modes at 2.5 GHz and 3.5 GHz. The operational mechanism is elucidated by modal analysis and characteristic angle. This antenna operates on two different frequencies at the 2.5 GHz IRNSS band with horizontal polarization and the 3.5 GHz 5G service with vertical polarization. The maximum gain achieved with these frequency ranges is 5.31 dBi and 4.72 dBi, respectively. A ring resonator is chosen to improve the axial ratio and impedance bandwidth of the suggested prototype. The antenna's ground plane is shaped like a rectangle and features a V-shaped slot in the radiating patch. The antenna's physical footprint is 50 mm × 50 mm × 1.6 mm and an FR4 dielectric substrate serves as its foundation. Through its interaction with a PIN diode, the diode modifies the polarization of the antenna. The antenna functions as a right-handed circular polarization (RHCP), when the diode is operational. The bandwidth from 4.3 to 7.5 GHz is covered. On the other hand, it generates linear polarization (LP) between 4.2 and 5.3 GHz. The experimental antenna is evaluated and examined for its performance characteristics. The simulations are carried out utilizing the CST simulator. A prototype antenna has been manufactured and its performance has been validated against simulated findings.

Compact Dual-Band Circularly Polarized Shared-Aperture Antenna for Satellite Communication Systems

A compact dual-band circularly polarized (CP) shared-aperture antenna is proposed for satellite communication. The antenna enables simultaneous dual-band functionality and CP radiation with right-handed CP in the Ku band and left-handed CP (LHCP) in the Ka band. The shared-aperture is implemented by integrating two independent subapertures, which function through frequency-multiplexed, resulting in a minimized profile (0.04 λ 0 ) and reduced complexity, making it an ideal choice for array applications. To enhance inter-frequency isolation, a circular arrangement of metal vias is incorporated. The measured results indicate that the antenna effectively encompasses a 3 dB axial ratio (AR) bandwidth of 15.6–16.5 GHz in Ku and 26.5–27.5 GHz in Ka bands. Additionally, it exhibits a broader 10 dB impedance bandwidth (IBW) and superior port isolation bandwidth exceeding 30 dB.

Single-fed Ku/Ka dual-band aperture shared planar antenna array for satellite communication

This paper presents a single-fed Ku/Ka dual-band aperture-shared planar antenna array designed for satellite communication. The need to enhance data transmission speeds has driven the exploration of higher frequency bands, such as the Ku-band and Ka-band. Researchers have been investigating the design of multiband antennas to achieve space miniaturization and cost-effectiveness in these higher frequency bands. However, previous works faced challenges, including spatial efficiency limitations, complex radiator structures, band isolation issues, and increased complexity in the feeding network. To address the abovementioned challenges, this paper proposes a single-fed Ku/Ka dual-band shared-aperture planar antenna array. By combining a patch antenna for the Ku-band and a cavity antenna for the Ka-band, a simple and single-fed network is realized. The proposed antenna element is further extended to a linear array antenna and a sequentially rotated array antenna. The implemented sequentially rotated array antenna exhibited a measured impedance bandwidth of 17.4–19.7 GHz (12.4%) and 27.0–29.0 GHz (7.1%). Moreover, the proposed sequentially rotated array antenna demonstrated measured peak gains of 13.7 dBi for right-hand circular polarization in the Ku-band receiver and a measured peak gain of 15.6 dBi for left-hand circular polarization in the Ka-band transmitter, making it highly suitable for satellite communication.

High quality factor and unity circular dichroism enabled by dielectric-Weyl semimetal-dielectric stack

A mid-infrared (mid-IR) chiral absorber based on multilayer films of silicon (Si)/Weyl semimetal (WSM)/Si is proposed and numerically studied. The proposal exhibits high quality factor circular dichroism (CD) with different absorptance properties for right-hand circular polarization (RCP) and left-hand circular polarization (LCP) light. The absorption characteristics have been explored with the generalized 4 × 4 transfer matrix algorithm, and the effects of structural parameters on the circularly polarized (CP) absorptance are systematically investigated. The circular polarization efficiency (η) and CD are defined as crucial parameters for quantifying the chirality response. The results prove that the chiral absorber exhibits extraordinary efficiencies of 1 and 0 for LCP and RCP light at a wavelength of 11.5 μm, respectively. Thus a maximum CD in absorption of unity with a resonant quality factor (Q-factor) of 295 can be obtained. The performance of dual-band chiral responses can be engineered via the thickness of each layer. Moreover, it is identified that the design results in angle-independent performance, which is essential trait for an efficient chiral absorber.

Circularly Polarized Luminescence Without External Magnetic Fields from Individual CsPbBr3 Perovskite Quantum Dots.

Lead halide perovskite quantum dots (QDs), the latest generation of the colloidal QD family, exhibit outstanding optical properties, which are now exploited as both classical and quantum light sources. Most of their rather exceptional properties are related to the peculiar exciton fine-structure of band-edge states, which can support unique bright triplet excitons. The degeneracy of the bright triplet excitons is lifted with energetic splitting in the order of millielectronvolts, which can be resolved by the photoluminescence (PL) measurements of single QDs at cryogenic temperatures. Each bright exciton fine-structure-state (FSS) exhibits a dominantly linear polarization, in line with several theoretical models based on the sole crystal field, exchange interaction, and shape anisotropy. Here, we show that in addition to a high degree of linear polarization, the individual exciton FSS can exhibit a non-negligible degree of circular polarization even without external magnetic fields by investigating the four Stokes parameters of the exciton fine-structure in individual CsPbBr3 QDs through Stokes polarimetric measurements. We observe a degree of circular polarization up to ∼38%, which could not be detected by using the conventional polarimetric technique. In addition, we found a consistent transition from left- to right-hand circular polarization within the fine-structure triplet manifold, which was observed in magnetic-field-dependent experiments. Our optical investigation provides deeper insights into the nature of the exciton fine structures and thereby drives the yet-incomplete understanding of the unique photophysical properties of this class of QDs for the benefit of future applications in chiral quantum optics.

A dual-band dual-sense circularly polarized patch antenna using hybrid capacitive-inductive proximity-coupling feed

This paper presents a new proximity-coupling mechanism between a rectangular patch and a microstrip line with an open circuit terminal. The patch is located to cover both adjacent maximum-voltage (capacitive coupling) and maximum-current (inductive coupling) points of the standing wave on the feedline, and consequently, two orthogonal resonant modes with 90° phase difference are excited on the patch for generating a circularly polarized (CP) radiation. Based on this feeding mechanism, a dual-band dual-sense CP antenna is designed, which is composed of two linear rectangular patch arrays coupled to an open-ending microstrip line. It is realized on a single-layer substrate and its CP rotating sense in each band is opposite to each other. For verification, the antenna operating at 5.0 and 8.0 GHz are designed, fabricated, and tested. Noting that the design concept can be easily implemented to other frequency bands. The measurements result in an impedance-matching bandwidth of 4.72 – 5.10 GHz and 7.50 – 8.20 GHz. The antenna is left-hand CP for the lower band and right-hand CP for the upper band. In addition, the prototype shows a 3-dB axial ratio bandwidth of 4.93 – 5.02 GHz and 7.40 – 8.10 GHz and peak gains of 11.4 and 12.7 dBic at the lower and upper bands, respectively.

Thermally tunable broadband circular dichroism with Weyl semimetal/vanadium dioxide planar structure

Weyl semimetals (WSMs) have lately attracted significant interest because of the intrinsic large gyrotropic optical response and strong chiral anomaly. This study presents a mid-infrared (mid-IR) lithography-free platform exhibits broadband near-unity circular dichroism (CD) with WSM-vanadium dioxide (VO2) dual layers. The optical responses with mid-IR radiation have been explored with the generalized 4 × 4 transfer matrix algorithm. It is theoretically shown that the proposal possesses different absorption characteristics for right-handed circularly polarized (RCP) and left-handed circularly polarized (LCP) light. Theoretical results show that a CD in absorption reaching 0.936 and a g factor of 1.76 under 300 K temperature. The merit of the wide-angular chiral capacity can be maintained. The magnitude and resonance of CD can be tuned not only by adjusting the structural parameters, but also the insulator-to-metal transition (IMT) of VO2, which may facilitate the design of more efficient chiral optical devices.

A metasurface-based high gain circularly polarized patch antenna with wide global bandwidth

This paper introduces a novel metasurface (MS)-based circularly polarized (CP) microstrip patch antenna. Utilizing a square microstrip patch with plus- and diagonal-shaped slots on a 1.6 mm thick FR-4 substrate as the host antenna, the design incorporates a 4 × 4 square array MS on another 1.6 mm thick FR-4 substrate, separated by a 3.4 mm thick Teflon layer. The antenna offers a −10-dB impedance bandwidth from 5.45 to 7.55 GHz and an axial ratio (AR) bandwidth between 6.02 and 6.35 GHz, achieving a maximum realized gain of 6.3 dBic at 6.25 GHz, exhibiting right-handed circular polarization (RHCP). An equivalent circuit model is developed to validate impedance response, and the fabricated antenna closely matches simulated results. With a low profile of 0.42 λ o × 0.42 λ o × 0.033 λ o at 6.25 GHz, this CP antenna is suitable for applications like satellite communication for their uplinks and WLAN application.

Real-time measurement of pump beam polarization through the transmitted light intensity in a polarized alkali metal vapor cell

A laser beam with left-/right-handed circular polarization is generally used to create the oriented atomic spins for precision measurements in a spin-exchange relaxation-free (SERF) co-magnetometer. The fluctuation of laser polarization interferes with the spin polarization of alkali metal atoms, leading to the system performance degradation. Here, we report a method for real-time polarization state measurement by using the transmitted light intensity of the pump beam passing through the vapor cell. Based on the principle of circular dichroism, the optical absorption model of polarized alkali metal atoms is established. The simulation results of the transmittance of the pump laser with different polarization states through the alkali metal vapor cell are given and verified by experiments. The experimental results show that the circularly polarized beam has the weakest absorption, while the linearly polarized laser beam is absorbed the strongest. The achieved measurement accuracy stands at an impressive 98.83 %. This work provides a simple and easy-to-use way to measure the polarization state of the laser beam used in the vapor cell devices, particularly the microfabricated prototypes with limited space.

Broadband intelligent programmable metasurface with polarization-modulated self-adaptive electromagnetic functionality switching

Programmable metasurfaces have received a great deal of attention due to their ability to dynamically manipulate electromagnetic (EM) waves. Despite the rapid growth, most of the existing metasurfaces require manual control to switch among different functionalities, which poses severe limitations on practical applications. Here, we put forth an intelligent metasurface that has self-adaptive EM functionality switching in broadband without human participation. It is equipped with polarization discrimination antennas (PDAs) and feedback components to automatically adjust functionalities for the different incident polarization information. The PDA module can first perceive the polarization of incident EM waves, e.g., linear or circular polarization, and then provide the feedback signal to the controlling platform for switching the EM functionality. As exemplary demonstrations, a series of functionalities in the 9–22 GHz band has been realized, including beam scanning for x-polarization, specular reflection for y-polarization, diffuse scattering for left-handed circular polarization (LCP), and vortex beam generation for right-handed circular polarization (RCP) waves. Experiments verify the good self-adaptive reaction capability of the intelligent metasurface and are in good agreement with the designs. Our strategy provides an avenue toward future unmanned devices that are consistent with the ambient environment.

Circularly Polarized Series Array and MIMO Application for Sub-Millimeter Wave/Terahertz Band

This article presents a compact, planar, and circularly polarized array antenna operating in the W-band (84.5–110 GHz), with all its prototypes fabricated using a low-cost, traditional, microwave printed circuit board composed of Rogers RT/duroid 5880 (ε<sub>r</sub> = 2.2, tanδ = 0.009). The final design that was fabricated and measured was a 4 × 4 array antenna having an overall size of 9 mm × 20 mm × 0.254 mm that used series feeding to reduce its sidelobes. Measurements of the 4 × 4 patch antenna array showed approximately 6.9% 3-dB axial ratio bandwidth along with 15.2 dBi maximum right-hand circularly polarized (RHCP) antenna gain at 100 GHz. The array antenna yielded RHCP radiation characterized by a low profile, low cross-polarization levels (<−25 dB), low sidelobe levels (≤−10 dB), and high radiation efficiency (>91%). Additionally, a two-port MIMO antenna system was investigated by considering side-by-side and front-tofront configurations, both of which achieved good isolation and considerable envelope correlation coefficient and diversity gain values. Therefore, the proposed series array and MIMO antennas can be reasonable candidates for 6G applications of the sub-THz band (100– 110 GHz) in ultra-high-speed wireless and satellite communication systems.

Self-Powered Circularly Polarized Light Detection Enabled by Chiral Two-Dimensional Perovskites with Mixed Chiral-Achiral Organic Cations.

Direct detection of circularly polarized light (CPL) holds great promise for the development of various optical technologies. Chiral 2D organic-inorganic halide perovskites make it possible to fabricate CPL-sensitive photodetectors. However, selectively detecting left-handed circularly polarized (LCP) and right-handed circularly polarized (RCP) light remains a significant challenge. Herein, we demonstrate a greatly enhanced distinguishability of photodiode-type CPL photodetectors based on chiral 2D perovskites with mixed chiral aryl (R)-(+),(S)-(-)-α-methylbenzylammonium (R,S-MBA) and achiral alkyl n-butylammonium (nBA) cations. The (R,S-MBA0.5nBA0.5)2PbI4 perovskites exhibit a 10-fold increase in circular dichroism signals compared to (R,S-MBA)2PbI4 perovskites. The CPL photodetectors based on the mixed-cation perovskites exhibit self-powered capabilities with a specific detectivity of 2.45 × 1012 Jones at a 0 V bias. Notably, these devices show high distinguishability (gres) factors of -0.58 and +0.54 based on (R,S-MBA0.5nBA0.5)2PbI4 perovskites, respectively, surpassing the performance of (R-MBA)2PbI4-based devices by over 3-fold and setting a record for CPL detectors based on chiral 2D n = 1 perovskites.

A compound reconfigurable electronically switched parasitic monopole antenna for sub 6 GHz wireless and vehicular applications

In this paper, a compound reconfigurable electronically switched parasitic monopole antenna is reported for sub-6 GHz (n77/n78 bands) wireless standards and vehicular communication. The antenna comprises a half-hexagonal-shaped radiating element and two inverted L-shaped parasitic stubs. These stubs are connected through two PIN diodes, allowing for control over frequency. An additional pair of PIN diodes incorporates analogous parasitic stubs into the ground plane to facilitate pattern tilting and polarization. By switching these PIN diodes across seven operating states (OS), the antenna structure could resonate in a single band, spanning 4.5–5.8 GHz (sub-6 GHz higher band), with an omnidirectional pattern specific to OS1. In OS2 and OS3, the antenna resonates in a single band within the range of 4.1–5.7 GHz, featuring beam tilting with linear polarization. In OS4 and OS5, the structure has two bands: one covers 3.3–4.2 GHz (5G-n77 band) with linear polarization, and the other covers 5.1–6.1 GHz (5G WLAN band) with right-hand circular polarization (RHCP) in OS5 and left-hand circular polarization (LHCP) in OS4 with an axial ratio bandwidth of 14.5 %, including pattern tilting within the range of ± 340. Finally, in the OS6 and OS7 structure introduce dual bands of 3.3–3.8 GHz (5G–n78 band) and 4.8–5.8 GHz (sub-6 GHz higher band). Both bands feature LHCP/RHCP with an axial ratio bandwidth of 8.57 % for the lower resonant band and 7.4 % for the higher resonant band. Additionally, it incorporates radiation pattern reconfiguration capabilities. The structure is printed on an FR-4 substrate and measures various associated parameters. The experimental results closely match the simulated results.

Dual wideband circularly polarized reconfigurable antenna using gap loaded annular ring

This work presents a novel proposal for a dual wideband circularly polarized (CP) reconfigurable antenna for wideband wireless communication applications. The circularly polarized characteristic is achieved by introducing a gap in the annular ring, which leads to the generation of traveling waves in circular patterns. The concentric annular ring patch is fed using a tapered 50 Ω microstrip line. Dual wideband characteristics are obtained by incorporating concentric annular rings and additional DGS (defective ground structure) to achieve wideband characteristics. By employing PIN diodes, the proposed approach facilitates reconfiguration, allowing for both left-hand circular polarization (LHCP) and right-hand circular polarization (RHCP) in either single or dual wideband operations. The CP antenna exhibits an impressive measured axial ratio bandwidth (ARBW) of 35 % (3438–4900 MHz) and 18.75 % (5154–6252 MHz). The measured return loss bandwidths of the proposed antenna are 18.40 % (3990–4799 MHz) and 35.17 % (5161–7364 MHz). The antenna, fabricated using FR4, is compact in size, measuring 0.56 λo*0.56 λo*0.01 λo, and has a peak gain of 6.33 dBic. The simulated outcomes and hardware measurement findings agreed well.

Design of Series-Fed Circularly Polarized Beam-Tilted Antenna for Microwave Power Transmission in UAV Application

In response to the increasing deployment of unmanned aerial vehicles (UAVs) across various sectors, the demand for efficient microwave power transmission (MPT) systems for UAVs has become paramount. This study introduces series-fed circularly polarized (CP) and passively beam-tilted patch array antennas designed to enhance MPT in UAV applications, with the intention of addressing the needs related to extending flight times and improving operational efficiency. The radiating element of the proposed antennas employs the conventional model of the patch with truncated corners for CP operation, with transmission line lengths optimized for beam tilt to ensure precise energy transfer. Additionally, an open stub is integrated into the broadside series-fed antenna to improve impedance matching, which is crucial for maintaining signal integrity. The proposed design achieves right-hand circular polarization (RHCP) with an axial ratio (AR) below 3 dB across the operating band, indicative of its effectiveness in diverse UAV operational contexts. Prototypes of each proposed antenna were fabricated and measured according to the beam tilting angle. The measured RHCP realized gains of the proposed antennas are 14.59, 13.09, 13.07, and 10.71 dBic at the tilted angles of 0°, 15°, 30°, and 45°, respectively, at 5.84 GHz.

Metasurface-inspired circularly polarized patch antenna using DGS for sub 6-GHz applications

A novel circularly polarized metasurface inspired regular triangle patch antenna (RTPA) with enhanced gain and bandwidth is proposed in this paper. The antenna is composed of a triangular patch-driven element sandwiched between a 3×3 sub-wavelength square patch metasurface array and the ground plane. Initially, the RTPA is designed, and the ground plane is etched with fractal slots to produce degenerate modes for circular polarization. A metasurface array is used as a superstrate to improve gain and bandwidth in terms of impedance and axial ratio (AR). Another advantage of using a metasurface is the reduction of cross-polar radiation, particularly when employing a triangular-shaped patch antenna. The asymmetry of this structure leads to cross-polar components contributed by dominant modes rather than higher-order modes, and the use of a metasurface markedly diminishes these components. The proposed antenna's experimental results show a 10 dB return loss (|S11|) with a metasurface demonstrates a measured impedance bandwidth and axial ratio bandwidth of 760 and 350 MHz, respectively. The antenna exhibits right-hand circular polarization with a measured gain of 5.87 dBic at the operating frequency.

Reconfigurable origami hologram based on deep neural networks.

Reconfigurable and multifunctional metasurfaces are becoming indispensable in a variety of applications due to their capability to execute diverse functions across various states. However, many of these metasurfaces incorporate complex active components, thereby escalating structural complexity and bulk volume. In this research, we propose a reconfigurable passive hologram based solely on an origami structure, enabling the successful generation of holograms depicting the 'Z' and 'L' illuminated by a right-hand circular polarization (RHCP) wave in two distinct states: planar and zigzag configuration, respectively. The transformation between the 2D planar metasurface and the 3D zigzag structure with slant angles of 35 is achieved solely through mechanically stretching and compressing the origami metasurface. The phases on the origami metasurface are trained through a deep neural network which operates on the NVIDIA Tesla k80 GPU, with the total training process costing 11.88 s after 100 epochs. The reconfigurable scheme proposed in this research provides flexibility and ease of implementation in the fields of imaging and data processing.