Rifting Stage Research Articles

Seismicity During Continental Breakup in the Red Sea Rift of Northern Afar

AbstractContinental rifting is a fundamental component of plate tectonics. Recent studies have highlighted the importance of magmatic activity in accommodating extension during late‐stage rifting, yet the mechanisms by which crustal thinning occurs are less clear. The Red Sea rift in Northern Afar presents an opportunity to study the final stages of continental rifting as these active processes are exposed subaerially. Between February 2011 and February 2013 two seismic networks were installed in Ethiopia and Eritrea. We locate 4,951 earthquakes, classify them by frequency content, and calculate 31 focal mechanisms. Results show that seismicity is focused at the rift axis and the western marginal graben. Rift axis seismicity accounts for ∼64% of the seismic moment release and exhibits a swarm‐like behavior. In contrast, seismicity at the marginal graben is characterized by high‐frequency earthquakes that occur at a constant rate. Results suggest that the rift axis remains the primary locus of seismicity. Low‐frequency earthquakes, indicative of magmatic activity, highlight the presence of a magma complex ∼12 km beneath Alu‐Dalafilla at the rift axis. Seismicity at the marginal graben predominantly occurs on westward dipping, antithetic faults. Focal mechanisms show that this seismicity is accommodating E‐W extension. We suggest that the seismic activity at the marginal graben is either caused by upper crustal faulting accommodating enhanced crustal thinning beneath Northern Afar or as a result of flexural faulting between the rift and plateau. This seismicity is occurring in conjunction with magmatic extension at the rift axis, which accommodates the majority of long‐term extension.

Cambro-Silurian magmatisms at the northern Gondwana margin (Penninic basement of the Ligurian Alps)

The Early Paleozoic evolution of the northern margin of Gondwana is characterized by several episodes of bimodal magmatism intruded or outpoured within thick sedimentary basins. These processes are well recorded in the Variscan blocks incorporated in the Ligurian Alps because they experienced low temperature Alpine metamorphism. During the Paleozoic, these blocks, together with the other Alpine basements, were placed between the Corsica-Sardinia and the Bohemian Massif along the northern margin of Gondwana. In this framework, they host several a variegated lithostratigraphy forming two main complexes (Complexs I and II) that can be distinguished by both the protoliths and their cross-cutting relationships, which indicate that the acidic and mafic intrusives of Complex II cut an already folded sequence made of sediments, basalts and granitoids of Complex I. Both complexes were involved in the Variscan orogenic phases as highlighted by the pervasive eclogite-amphibolite facies schistosity (foliation II). However, rare relicts of a metamorphic foliation at amphibolite facies conditions (foliation I) is locally preserved only in the rocks of Complex I. It is debatable if this schistosity was produced during the early folding event – occurred between the emplacement of Complex I and II – rather than during an early stage of the Variscan metamorphic cycle.New SHRIMP and LA ICP-MS U–Pb zircon dating integrated with literature data, provide emplacement ages of the several volcanic or intrusive bodies of both complexes. The igneous activity of Complex I is dated between 507 ± 15 Ma and 494 ± 5 Ma, while Complex II between 467 ± 12 Ma and 445.5 ± 12 Ma. The folding event recorded only by the Complex I should therefore have occurred between 494 ± 5 Ma and 467 ± 12 Ma. The Variscan eclogite-amphibolite facies metamorphism is instead constrained between ∼420 Ma and ∼300 Ma. These ages and the geochemical signature of these rocks allow constraining the Early Paleozoic tectono-magmatic evolution of the Ligurian blocks, from a middle–upper Cambrian rifting stage, through the formation of an Early Ordovician volcanic arc during the Rheic Ocean subduction, until a Late Ordovician extension related to the arc collapse and subsequent rifting of the PaleoThetys. Furthermore, the ∼420–350 Ma ages from zircon rims testify to thermal perturbations that may be associated with the Silurian rifting-related magmatism, followed by the subduction-collisional phases of the Variscan orogeny.

Anatomy of anomalously thick sandstone units in the Brent Delta of the northern North Sea

Some potentially attractive reservoirs, containing anomalously thick (10s to a few 100 m), cross-stratified sandstone, have been locally encountered within both the classic regressive (lower Brent) and the transgressive (upper Brent) segments of the Brent Delta. Three documented cases of these sandstone bodies are re-examined. They are internally dominated by simple or compound dunes, and typified by two types of deepening-upward succession, recording a retrogradational or transgressive shoreline history. Type I is expressed as a single estuarine succession changing upwards from erosive, coarse-grained channelized deposits into outer estuary tidal bar deposits. The estuary is underlain and overlain by deltaic deposits. Type II lacks significant basal river deposits but is composed by stacked mixed-energy and tide-dominated estuarine deposits. It is underlain by deltaic deposits and overlain by open marine sediments. Considering the structural evolution in the northern North Sea basin, we suggest (as did some earlier researchers) that these sandstone bodies were local, but sometimes broad transgressive estuaries, formed at any time during large-scale Brent Delta growth and decay. The estuary generation was likely triggered by fluvial incision coupled with active faulting, producing variable accommodation embayments, where tidal currents became focused and deposition became transgressive. The spatial variations of the interpreted estuary deposits were linked with variable, fault-generated accommodation. The relatively simple, lower Brent estuarine units were created by short-lived, fault activity in places, whereas the complex, stacked upper-Brent estuarine units were likely a result of more long-lived, punctuated fault-induced subsidence leading into the northern North Sea main rifting stage. The thick cross-stratified units potentially accumulated in the hangingwall of large bounding faults.

Evidence for triple-junction rifting focussed on local magmatic centres along Parga Chasma, Venus

Parga Chasma is a discontinuous rift system marking the southern boundary of the Beta-Atla-Themis (BAT) region on Venus. Along a 1500 km section of Parga Chasma, detailed mapping of Magellan Synthetic Aperture Radar images has revealed 5 coronae, 11 local rift zones distinct from a regional extension pattern, and 47 graben-fissure systems with radiating (28), linear (12) and circumferential (7) geometries. The magmatic centres of these graben-fissure systems typically coincide with coronae or large volcanoes, although a few lack any central magmatic or tectonic feature (i.e. are cryptic). Some of the magmatic centres are interpreted as the foci of triple-junction rifting that form the 11 local rift zones. Cross-cutting relationships between graben-fissure systems and local rift faults reveal synchronous formation, implying a genetic association. Additionally, cross-cutting relationships show that local rifting events postdate the regional extension along Parga Chasma, further indicating multiple stages of rifting. Evidence for multiple centres of younger magmatism and local rifting against a background of regional extension provides an explanation for the discontinuous morphology of Parga Chasma. Examination of the Atlantic Rift System (prior to ocean opening) on Earth provides an analogue to the rift morphologies observed on Venus.

Tectono-thermal evolution of the Liwan Sag, deepwater area in the Zhujiang River Mouth Basin, northern South China Sea

The Liwan Sag, with an area of 4 000 km2, is one of the deepwater sags in the Zhujiang River (Pearl River) Mouth Basin, northern South China Sea. Inspired by the exploration success in oil and gas resources in the deepwater sags worldwide, we conducted the thermal modeling to investigate the tectono-thermal history of the Liwan Sag, which has been widely thought to be important to understand tectonic activities as well as hydrocarbon potential of a basin. Using the multi-stage finite stretching model, the tectonic subsidence history and the thermal history have been obtained for 12 artificial wells, which were constructed on basis of one seismic profile newly acquired in the study area. Two stages of rifting during the time periods of 49–33.9 Ma and 33.9–23 Ma can be recognized from the tectonic subsidence pattern, and there are two phases of heating processes corresponding to the rifting. The reconstructed average basal paleo-heat flow values at the end of the rifting events are ~70.5 and ~94.2 mW/m2 respectively. Following the heating periods, the study area has undergone a persistent thermal attenuation phase since 23 Ma and the basal heat flow cooled down to ~71.8–82.5 mW/m2 at present.

Control of Pre‐rift Lithospheric Structure on the Architecture and Evolution of Continental Rifts: Insights From the Main Ethiopian Rift, East Africa

AbstractWe investigate the along‐axis variations in architecture, segmentation, and evolution of the Main Ethiopian Rift (MER), East Africa, and relate these characteristics to the regional geology, lithospheric structure, and surface processes. We first illustrate significant along‐axis variations in basin architecture through analysis of simplified geological cross sections in different rift sectors. We then integrate this information with a new analysis of Ethiopian topography and hydrography to illustrate how rift architecture (basin symmetry/asymmetry) is reflected in the margin topography and has been likely amplified by a positive feedback between tectonics (flexural uplift) and surface processes (fluvial erosion and unloading). This analysis shows that ~70% of the 500 km long MER is asymmetric, with most of the asymmetric rift sectors being characterized by a master fault system on the eastern margin. We finally relate rift architecture and segmentation to the regional geology and geophysical constraints on the lithosphere. We provide strong evidence that rift architecture is controlled by the contrasting nature of the lithosphere beneath the homogeneous, strong Somalian Plateau and the weaker, more heterogeneous Ethiopian Plateau, differences originating from the presence of pre‐rift zones of weakness on the Ethiopian Plateau and likely amplified by surface processes. The data provided by this integrated analysis suggest that asymmetric rifts may directly progress to focused axial tectonic‐magmatic activity, without transitioning into a symmetric rifting stage. These observations have important implications for the asymmetry of continental rifts and conjugate passive margins worldwide.

Rift–Related Sediments of the Passive Continental Margin of the Paleo-Asian Ocean (Baikal Segment)

The geological position, composition, and age of detrital zircons of sedimentary deposits of the Nugan Formation of the Western Baikal region underlying the Golousta Formation of the Baikal series of Ediacaran age have been studied. The formation of both stratigraphic units due to the same sources of detrital material, located within the southern flank of the Siberian Craton, has been proved. The deposits of the Nugan Formation have been demonstrated to mark the rifting stage of the formation of the passive margin of the Paleo-Asiatic Ocean: their accumulation occurred in the Late Cryogenian during the interval 720–640 Ma.

Tectono-stratigraphic evolution of the Southern Campania Margin: a key area for the evolution of the Tyrrhenian-Apennine system

The Southern Campania Margin (SCM) represents a key area of the Central Mediterranean because it records all the rifting stages of the Tyrrhenian Sea. The interpretation of a seismic dataset calibrated with deep wells and outcrops, using seismic stratigraphy and structural geology methods in a dedicated Geographic Information System (GIS) environment, the seismic depth conversion, the generation of 2-D and 3-D models led to the reconstruction of a polyphased tectono-stratigraphic evolution of the SCM. During the early stage of Tyrrhenian opening a terrigenous transtensional Basin (Langhian-Tortonian Cilento Basin) formed on the Liguride accretionary prism adjacent to the Calabria crystalline terrane. In the SCM the Liguride thrust sheets tectonically overly the Apennine Platform units and both these nappes have been dismembered by Quaternary faults. Three rifting stages, not homogeneously distributed, affected the region since the Lower Pleistocene. They are associated to the deposition of a thick Quaternary succession (A, B and C units). During these Pleistocene stages there was an abrupt change of the extension direction (from NE-SW to NW-SE) accompanying a change of the nappe transport direction of the Southern Apennines. The construction of balanced sections using dedicated software, permitted us to recognize the true geometry of the faults and compute the amount of Quaternary extension of the SCM that results comparable to those calculated for other sectors of the Tyrrhenian margin and further extensional regions worldwide.

The stretching amplitude and thermal regime of the lithosphere in the nonvolcanic passive margin of Antarctica in the Mawson Sea region

The burial history and thermal evolution of the lithosphere within the passive nonvolcanic Antarctic margin in the region of the Mawson Sea are numerically reconstructed for the margin areas along the seismic profile 5909 with the use of the GALO basin modeling system. The amplitudes of the lithosphere stretching at the different stages of continental rifting which took place from 160 to 90 Ma ago are calculated from the geophysical estimates of the thickness of the consolidated crust and the tectonic analysis of the variations in the thickness of the sedimentary cover and sea depths during the evolution of the basin. It is hypothesized that the formation of the recent sedimentary section sequence in the studied region of the Antarctic margin began ~140 Ma ago on a basement that was thinned by a factor of 1.6 to 4.5 during the first episode of margin stretching (160–140 Ma) under a fairly high heat flux. The reconstruction of the thermal regime of the lithosphere has shown that the mantle rocks could occur within the temperature interval of serpentinization and simultaneously within the time interval of lithospheric stretching (–160 < t <–90 Ma) only within separate segments of profile 5909 in the Mawson Sea. The calculations of the rock strength distribution with depth by the example of the section of pseudowell 4 have shown that a significant part of the crust and uppermost mantle fall here in the region of brittle deformations in the most recent period of lithosphere stretching (–104 to–90 Ma ago). The younger basin segments of profile 5909 in the region of pseudowells 5 and 6 are characterized by a high heat flux, and the formation of through-thickness brittle fractures in these zones is less probable. However, serpentinization could take place in these areas as in the other margin segments at the stage of presedimentation ultra slow basement stretching.

Determining paleo-structural environments through natural fracture and calcite twin analyses: a case study in the Otway Basin, Australia

The structural history of the Otway Basin has been widely studied; however, previous works have focussed on large kilometre scale, basin and seismic structures, or have over-simplified natural fracture analysis with an excessive focus on fracture strike direction and a disregard for 3D geometry, a crucial characteristic when considering states of stress responsible for natural fracture formation. In this paper, we combine techniques of natural fracture analysis and calcite twin stress inversion to investigate the meso (outcrop and borehole) and micro (crystal) scale evidence for structural environments that have contributed to basin evolution. Our results indicate that basin evolution during the post-Albian may be markedly more complex than the previously thought stages of late Cretaceous inversion, renewed rifting and long-lived mid-Eocene to recent compression, with evidence for up to six structural environments detected across the basin, including; NE–SW and NW–SE extension, NW–SE compression, a previously undetected regime of NE–SW compression, and two regimes of strike-slip activity. By constraining structural environments on the meso- and micro-scale we can deliver higher levels of detail into structural evolution, which in turn, provides better-quality insights into multiple petroleum system elements, including secondary migration pathways and trap formation. Our research also shows that the Otway Basin presents a suitable environment for additional micro-scale structural investigations through calcite twin analyses.

Newly identified 1.89 Ga mafic dyke swarm in the Archean Yilgarn Craton, Western Australia suggests a connection with India

The Archean Yilgarn Craton in Western Australia is intruded by numerous mafic dykes of varying orientations, which are poorly exposed but discernible in aeromagnetic maps. Previous studies have identified two craton-wide dyke swarms, the 2408 Ma Widgiemooltha and the 1210 Ma Marnda Moorn Large Igneous Provinces (LIP), as well as limited occurrences of the 1075 Ma Warakurna LIP in the northern part of the craton. We report here a newly identified NW-trending mafic dyke swarm in southwestern Yilgarn Craton dated at 1888 ± 9 Ma with ID-TIMS U-Pb method on baddeleyite from a single dyke and at 1858 ± 54 Ma, 1881 ± 37 and 1911 ± 42 Ma with in situ SHRIMP U-Pb on baddeleyite from three dykes. Preliminary interpretation of aeromagnetic data indicates that the dykes form a linear swarm several hundred kilometers long, truncated by the Darling Fault in the west. This newly named Boonadgin dyke swarm is synchronous with post-orogenic extension and deposition of granular iron formations in the Earaheedy basin in the Capricorn Orogen and its emplacement may be associated with far field stresses. Emplacement of the dykes may also be related to initial stages of rifting and formation of the intracratonic Barren Basin in the Albany-Fraser Orogen, where the regional extensional setting prevailed for the following 300 million years. Recent studies and new paleomagnetic evidence raise the possibility that the dykes could be part of the coeval 1890 Ma Bastar-Cuddapah LIP in India. Globally, the Boonadgin dyke swarm is synchronous with a major orogenic episode and records of intracratonic mafic magmatism on many other Precambrian cratons.

Marsili and Cefalù basins: The evolution of a rift system in the southern Tyrrhenian Sea (Central Mediterranean)

Abstract The Marsili Basin (in the southern Tyrrhenian Sea), whose mode of extension is still a controversial issue, is the youngest bathyal basin of the Central Mediterranean. A thin sedimentary cover in the basin permits to image basement fabric and structure by swath mapping and seismic reflection data. We investigate the crustal structure of the southern Tyrrhenian Sea, extending from the bathyal Marsili Basin to the adjacent Sicily continental margin. Interpretation of seismic reflection profiles (calibrated by well and dredge data) and crustal cross-sections were used to identify the stratigraphic infill, structural pattern and large-scale crustal features of the region. We recognized three basins in the southern Tyrrhenian Sea: (1) the Termini basin that is an overfilled sedimentary basin on the continental shelf area; (2) the Cefalu basin, located on the continental slope area and filled by thick deep water turbidite deposits; (3) the distal Marsili basin, filled by hemipelagic and thin distal turbidite deposits. The sequence stratigraphy interpretation permitted us to recognize fourth-order depositional sequences and the stratigraphic signature of the rift stages. An important increase in the sedimentary supply from the continental shelf to the bathyal basin occurred approximately over the last 0.5 Ma and is related to the uplift of the coastal area. The stratigraphic constrains indicate a Lower Pleistocene age for the opening of the southern Tyrrhenian Sea basin. The structural map reveals a complex fault pattern, in which coeval normal faults disclose a triangular basin from the Marsili bathyal basin to the Sicily continental margin, associated to an Euler pole in the northern Sicily. Tacking in account the faults pattern that developed in the whole Southern Tyrrhenian Sea during the Lower Pleistocene, we reconstructed two opposite triangular basins separated by a perpendicular rift. For analogy with the contiguous Vavilov basin, we propose that the extension in the Marsili basin reached the mantle exhumation stage.

High resolution stratigraphy of initial stages of rifting, Sergipe-Alagoas Basin, Brazil

ABSTRACT: The present work aims to characterize the Neo-Jurassic to Neocomian succession of the Sergipe-Alagoas Basin, located in northeast region of Brazil, in order to discover the influence of tectonics on sedimentation in detailed scale and thus separating this sedimentary succession in tectono-stratigraphic units. Fieldwork observations and stratigraphic sections analysis allowed subdividing this rift succession into three depositional units that indicate different paleogeographic contexts. Unit I, equivalent to the top of Serraria Formation, is characterized by braided fluvial channel deposits, with paleocurrent direction to SE; unit II, corresponding to the base of Feliz Deserto Formation, is composed of anastomosed fluvial channel and floodplain facies associations; and unit III, equivalent to the major part of Feliz Deserto Formation, is characterized by delta deposits with polymodal paleocurrent pattern. The changes of depositional system, as well as paleocurrent direction, suggest that the previously described units were deposited in different evolutionary stages of rifting. Units I and II represent the record of a wide and shallow basin associated with the first stage of rifting. Unit I is characterized by incipient extensional stress generating a wide synclinal depression, associated to the low rate of accommodation and low tectonic activity. These two parameters progressively increase in unit II. The paleocurrent direction of unit I indicates that the depocenter of this wide basin was located at SE of the studied area. No conclusion could be done on paleocurrent from unit II because of the low amount of measurements. Unit III suggests a second stage marked by a deeper basin context, with a high rate of accommodation space associated with the lateral connection of faults and individualization of the half-graben. The scattering in the paleocurrent direction in this unit indicates sedimentary influx coming from several sectors of the half-graben. The boundary between these two stages is marked by a flooding surface that indicates an extremely fast transition and suggests a radical change in geometric characteristics of the basin due to the increase of tectonic activity.

Inherited discontinuities and fault kinematics of a multiphase, non-colinear extensional setting: Subsurface observations from the South Flank of the Golfo San Jorge basin, Patagonia

We use three-dimensional (3D) seismic reflection data to analyze the structural style, fault kinematics and growth fault mechanisms of non-colinear normal fault systems in the South Flank of the Golfo San Jorge basin, central Patagonia. Pre-existing structural fabrics in the basement of the South Flank show NW-SE and NE-SW oriented faults. They control the location and geometry of wedge-shaped half grabens from the “main synrift phase” infilled with Middle Jurassic volcanic-volcaniclastic rocks and lacustrine units of Late Jurassic to Early Cretaceous age. The NE-striking, basement-involved normal faults resulted in the rapid establishment of fault lenght, followed by gradual increasing in displacement, and minor reactivation during subsequent extensional phases; NW-striking normal faults are characterized by fault segments that propagated laterally during the “main rifting phase”, being subsequently reactivated during succesive extensional phases. The Aptian-Campanian Chubut Group is a continental succession up to 4 km thick associated to the “second rifting stage”, characterized by propagation and linkage of W-E to WNW-ESE fault segments that increase their lenght and displacement in several extensional phases, recognized by detailed measurement of current throw distribution of selected seismic horizons along fault surfaces. Strain is distributed in an array of sub-parallel normal faults oriented normal to the extension direction. A Late Cretaceous-Paleogene (pre-late Eocene) extensional event is characterized by high-angle, NNW-SSE to NNE-SSW grabens coeval with intraplate alkali basaltic volcanism, evidencing clockwise rotation of the stress field following a ∼W-E extension direction. We demonstrate differences in growth fault mechanisms of non-colinear fault populations, and highlight the importance of follow a systematic approach to the analysis of fault geometry and throw distribution in a fault network, in order to understand temporal-spatial variations in the coeval topography, potential structural traps, and distribution of oil-bearing sandstone reservoirs.

Structural style, formation of low angle normal fault and its controls on the evolution of Baiyun Rift, northern margin of the South China Sea

Recent studies of high-resolution seismic reflection profiles in the northern rifted margin of the South China Sea revealed that low angle normal faults dominated the structural evolution of deepwater basins rather than high angle normal faults solely as was previously assumed; however, none of the studies proposed kinematic restorations of the fault system and the relationship to continental margin formation. The Baiyun Rift is located in the slope of the northern margin of the South China Sea underlain by extremely thinned continental crust. It is filled with a relatively complete sequence of Cenozoic sediments up to 10 km and has been considered the best-documented deepwater basin. Basin-wide 3D seismic data together with the available deepwater well data have allowed the structural framework to be built and tectono-stratigraphic history of the Baiyun Rift to be traced in detailed from the rift stage; a quantitative study of the primary geometry and kinematics of the major faults can be performed consequently. Results show the inception of the rift is characterized by faults slipped at high angles; the later stage (mid-Eocene) of intensive extension is dominated by a fault system with large horizontal displacements (>10 km) and initial low dips (<30°). The observations can be best explained by a low angle normal faulting (faults started out at shallow angles during mid-Eocene or being rotated from high angles) following a scattered high angle normal faulting. As a consequence, the polyphase faulting created a large accommodation space vertically and horizontally and formed a deep and wide shape of the Baiyun Rift. Besides, the phenomenon that the cessation of the rift in the Baiyun Rift predated the final breakup of the continental margin suggests the timing of the rifting events along the northern margin of the South China Sea is non-instantaneous. This study implies the progressive deformation dominated by low angle normal faulting causes an uneven distribution of the continental crustal thickness and may favor the breakup location in the northern South China Sea.

Paleostress analysis of the brittle deformations on the northwestern margin of the Red Sea and the southern Gulf of Suez, Egypt

Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and SHmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The SHmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.

Geological features, hydrocarbon accumulation and deep water potential of East Indian basins

Abstract Based on the tectonic evolution, sedimentary filling and hydrocarbon geological characteristics, this paper establishes a variety of deep water fan models and accumulation patterns and analyzes exploration potential of deep water area in East Indian basins. Due to the breakup of East Gondwana, the passive continental margins of East India are evolved. The basins in these margins experienced four evolution stages, which include intracratonic rift (P1-T), East Gondwana rift (J1-K1), post-rifted thermal subsidence (K2), and passive continental margin (K3-N). There are three obvious unconformities which were formed in the end stages of post-rift thermal subsidence and first and second phases of passive continental margin. Four sets of structural layers were formed, rift stage, and the first, second and third stages of passive continental marginal structural formation. The main deposition of these basins is the sediments evolved during the passive continental margin stage. Two prolific fan systems were developed: superposition fans are complicated in near shore and delta; low fans are located at fault slope-break while turbidity fans are located in front of delta. Four sets of proven source rocks were developed, the Lower Permian, Lower Cretaceous, Upper Cretaceous and Paleogene. There are many middle porosity reservoirs and lowstand permeability reservoirs, such as sandstone and local carbonate in rift period, sandstone of delta and deep water gravity flow in the rifted thermal subsidence and passive continental margin stages. Many seals were developed in the basins, regional seals in drifted stage and local seals in other stages, and the seals thickness change are enormous. There are eight plays in these basins which include Upper Cretaceous sandstone, Paleogene sandstone, Neogene sandstone, etc. The hydrocarbon exploration of deep water area during the passive continental margin stage should focus on Krishna and Cauvery river delta on the plane, and delta sandstone related to fault, lowstand fan located at fault slope-break and near shore fan complex in vicinity of 85°E ridge and south offshore of Cauvery basin vertically.

Fault‐magma interactions during early continental rifting: Seismicity of the Magadi‐Natron‐Manyara basins, Africa

AbstractAlthough magmatism may occur during the earliest stages of continental rifting, its role in strain accommodation remains weakly constrained by largely 2‐D studies. We analyze seismicity data from a 13 month, 39‐station broadband seismic array to determine the role of magma intrusion on state‐of‐stress and strain localization, and their along‐strike variations. Precise earthquake locations using cluster analyses and a new 3‐D velocity model reveal lower crustal earthquakes beneath the central basins and along projections of steep border faults that degas CO2. Seismicity forms several disks interpreted as sills at 6–10 km below a monogenetic cone field. The sills overlie a lower crustal magma chamber that may feed eruptions at Oldoinyo Lengai volcano. After determining a new ML scaling relation, we determine a b‐value of 0.87 ± 0.03. Focal mechanisms for 65 earthquakes, and 13 from a catalogue prior to our array reveal an along‐axis stress rotation of ∼60° in the magmatically active zone. New and prior mechanisms show predominantly normal slip along steep nodal planes, with extension directions ∼N90°E north and south of an active volcanic chain consistent with geodetic data, and ∼N150°E in the volcanic chain. The stress rotation facilitates strain transfer from border fault systems, the locus of early‐stage deformation, to the zone of magma intrusion in the central rift. Our seismic, structural, and geochemistry results indicate that frequent lower crustal earthquakes are promoted by elevated pore pressures from volatile degassing along border faults, and hydraulic fracture around the margins of magma bodies. Results indicate that earthquakes are largely driven by stress state around inflating magma bodies.

Uppermost Pliensbachian-Lowermost Toarcian ostracod assemblages from the Western Tethys: Comparison between Traras Mountains (Algeria), Subbetic (Spain), and Algarve (Portugal)

Major changes in ostracod assemblages have been recorded in the Lower Jurassic of Western Tethys related to biotic crises of the Pliensbachian-Toarcian boundary and the Polymorphum-Levisoni boundary (Toarcian Oceanic Anoxic Event). The study is focused on the ostracods assemblages from Benzerka section (Traras Mountains, Algeria) and their comparison with sections from External Subbetic and Algarve Basin (South Iberian Palaeomargin). Three stratigraphic intervals coincident with the ammonite zones have been differentiated with important fluctuations in the composition of ostracod assemblages. In the ostracod assemblages from the Traras Mountains the turnover related to this benthic biotic crisis is shown by assemblages previous to the biotic crisis (uppermost Pliensbachian) mainly composed by families Healdiidae and Cytherellidae to assemblages just after the T-OAE (upper part of the Levisoni Zone) with assemblages dominated by families Protocytheridae and Polycopidae and the extinction of family Healdiidae (suborder Metacopina). The Toarcian Oceanic Anoxic Event (T-OAE) probably resulted in restricted conditions but a barren interval due to oxygen-depleted conditions in this setting is not recorded. In this context, the change of components of ostracod assemblages looks gradual. In the Southiberian Palaeomargin, represented by the External Subbetic the turnover of ostracods assemblages is also recorded but the families involved are different than in Traras Mountains. Therefore, different phases have been differentiated in the ostracod turnover occurring from Upper Pliensbachian (assemblages dominated by families Pontocyprididae, Healdiidae and Bairdiidae) to end of Lower Toarcian (assemblages dominated by family Cytherellidae and the extinction of family Healdiidae). In the Algarve Basin the families Healdiidae and Bairdiidae were dominant previously to the Toarcian Oceanic Anoxic Event. Differences in the composition of ostracod assemblages between Traras Mountains and External Subbetic may be related to the fragmentation of these palaeomargins related to early stages of rifting in the Western Tethys. Moreover, the incidence of oxygen-depleted conditions was higher in External Subbetic than in Traras Mountains where some ostracod genera survive during the biotic crisis.

Rapid Evolution of Subduction‐Related Continental Intraarc Rifts: The Taupo Rift, New Zealand

AbstractThe evolution of the continental intraarc Taupo Rift in the North Island, New Zealand, is rapid, significantly faster than comparative intracontinental rifts such as the African Rifts. Based on our faulting data and published geological, geophysical, and borehole data, we show that activity in the ~2 Ma Taupo Rift has rapidly and asymmetrically narrowed via inward and eastward migration of faulting (at rates of approximately 30 km Myr−1 and 15 km Myr−1, respectively) and has propagated southward along its axis ~70 km in 350 kyr. The loci of voluminous volcanic eruptions and active faulting are correlated in time and space, suggesting that a controlling factor in the rapid rift narrowing is the presence of large shallow heterogeneities in the crust, such as large rhyolitic magma bodies generated by subduction processes, which weaken the crust and localize deformation. Eastward migration of faulting also follows the eastward migration of the volcanic arc which may be related to rollback of the Pacific crust slab at the Hikurangi subduction zone. Southward propagation of the rift is linked with southward migration of the Hikurangi Plateau/Chatham Rise subduction point and occurs episodically aided by stress changes associated with voluminous local volcanism. The large magma supply during early continental intraarc rift stages explains faster evolution (from tectonic to magmatic) than intracontinental rifts. However, the fast changes in magma supply from the subduction zone can also lead to evolution reversals (more evolved magmatic stages reverting to less evolved tectonic stages), rift cessation, and thus failed continental breakup.