Rich Conditions Research Articles

Sustainable Management of Arsenic Translocation in the Paddy Plants (Oryza sativa L) Cultivated in the Alluvial Soil of Gangetic West Bengal, India.

Rice plants are known to be more susceptible to arsenic (As) contamination during the cultivation process. Arsenic is genotoxic and can be a big threat to the rice eating people at large. Studies on an effective mitigation mechanism are the need of the hour. This work was an approach using iron (Fe3+) to form Fe-plaque in the plant root that could trap As. The present research was designed with several experimental set ups for rice cultivation in pot culture using different Fe doses with fertilizer in the soil, and finally, the optimum dose was selected considering the translocation ability, plant health, and molecular and stress biomarkers. The study revealed that on an increase in Fe dose, translocation factor (TF) and stress marker (malondialdehyde content) of the plant decreased gradually and encountered minimum (0.12 and 0.03mg/kg, respectively) at the dose of 4.5gm/kg. In contrast, higher values of chlorophyll (2.5mg/kg) and carbohydrate (2.2mg/kg) and intact DNA content were recorded highlighting the rich health condition of the plant. Thus, the experiment supported well the fact that the dose of Fe as fortified fertilizer can be considered the most effective in reducing soil arsenic accumulation in the rice plants. This approach might save the rice eating people from harmful effects of As contamination in this region of India.

Global biodiversity-related conventions on facilitating biodiversity conservation in Vietnam

Global biodiversity-related conventions have positively influenced nature conservation in Vietnam. Adherence to international policies and strategies is one of the critical motivations for reducing biodiversity loss. As highlighted in Aichi Target 11, protected areas are central for this effort and Vietnam is not an exception. In this study we reflect on and suggest how this Target can be most effectively pursued in Vietnam. Of which, besides remaining the status of special-use forests, uplifting protection forests, especially focusing on forest areas which are in rich biodiversity condition, to special-use forests category should be a priority.

Revealing the Origin of Low-Temperature Activity of Ni-Rh Nanostructures during CO Oxidation Reaction with Operando TEM.

In bimetallic heterostructured nanoparticles (NPs), the synergistic effect between their different metallic components leads to higher catalytic activity compared to the activity of the individual components. However, how the dynamic changes through which these NPs adopt catalytically active structures during a reaction and how the restructuring affects their activity are largely unknown. Here, using operando transmission electron microscopy, structural changes are studied in bimetallic Ni–Rh NPs, comprising of a Ni core whose surface is decorated with smaller Rh NPs, during a CO oxidation reaction. The direct atomic‐scale imaging reveals that, under O2‐rich conditions, Ni core partially transforms into NiO, forming a (Ni+NiO)–Rh hollow nanocatalyst with high catalytic activity. Under O2‐poor conditions, Rh NPs alloy with the surface of the core to form a NiRh‐alloy surface, and the NPs display significantly lower activity. The theoretical calculations indicate that NiO component that forms only under O2‐rich conditions enhances the activity by preventing the CO poisoning of the nanocatalysts. The results demonstrate that visualizing the structural changes during reactions is indispensable in identifying the origin of catalytic activity. These insights into the dynamic restructuring of NP catalysts under a reactive environment are critical for the rational design of high‐performance nanocatalysts.

Heat release peculiarities of polyoxymethylene dimethyl ether 1 – Part I: Effect of initial thermochemical conditions

Polyoxymethylene dimethyl ethers are strongly discussed as a promising oxygenated substitutes and potentially carbon-neutral fuels for compression-ignition engines. Polyoxymethylene dimethyl ether 1, also known as methylal or dimethoxymethane is the simplest representative of this family. Detailed knowledge of methylal combustion characteristics and underlying chemical kinetics are required to fully assess its combustion potential. In this study a numerical investigation of combustion heat release peculiarities of methylal/oxidizer propellant subjected to spontaneous auto-ignition was conducted in a constant-volume adiabatic reactor. The domain of initial conditions (temperature, pressure, equivalence ratio) promoting a discovered three-stage methylal heat release was outlined and analyzed for the first time. Fourteen detailed methylal kinetic mechanisms were validated against experimental ignition delay data. Three mechanisms (among fourteen) predicting in the most accurate manner the experimental data were selected to simulate the auto-ignition behavior of methylal/air mixtures. The overall range of examined initial in-reactor conditions spanned temperatures of 600–1400 K, pressures of 10–40 bar, and equivalence ratios of 0.1–2.0. The unknown previously three-stage methylal heat release phenomenon was revealed to predominantly occur within low-to-intermediate initial temperature range (below 900 K) at ultra-lean conditions (equivalence ratios below 0.5). The third-stage was found to exhibit prolonged CO2 and H2O formation supposedly due to lessened temperature gain prior to CO-to-CO2 chemistry and competing H2O formation pathways. At stoichiometric and rich conditions, an evidence of the three-stage ignition was found with high proximities between the latter stages. A comparative analysis with the highly-reactive non-oxygenated n-alkane representative, n-heptane, was conducted.

Transient kinetic analysis of passive SCR systems for NH3 abatement from natural gas fueled heavy duty engines over dual-layer ASC catalysts: An experimental and modelling study

Air-to-fuel ratios fluctuating around the stoichiometric value enable the best CH4, NOX and CO abatement performance of the three-way catalytic converters implemented in NGVs after-treatment systems; however, this leads to undesired NH3 production and potential slip under rich combustion conditions. An additional Passive SCR catalytic device placed downstream of the TWC, based on a dual-layer SCR+PGM configuration, could represent the solution.Through both transient experimental tests and modelling analysis, we demonstrate that effective NH3 abatement is achieved at low temperatures by its adsorption onto the SCR catalyst during the rich phases, and its further consumption by NO+O2 under lean conditions. Differently, at high temperatures NH3 is efficiently and selectively converted to nitrogen by direct oxidation through a redox reaction mechanism. The developed model can predict the performances of both fresh and aged catalysts under the transient rich-lean cycling experimental conditions investigated.

Experimental investigations on laminar burning velocity variation of CH4+H2+air mixtures at elevated temperatures

The present work reports experimental investigations on laminar burning velocity variation of CH4+H2+air mixtures at elevated temperatures (300–650 K) using an externally heated diverging-channel method. The effect of mixture equivalence ratio (ϕ = 0.7–1.3) and H2 fraction (0–50% by volume) on burning velocity have been reported at elevated temperatures. The experimental measurements are compared with numerical simulations using GRI Mech 3.0 and FFCM-1 kinetic models. The obtained results exhibit an increase in the laminar burning velocity with H2 fraction due to the formation of H-atom as an intermediate. The temperature dependency is established through a power-law correlation. The temperature-exponent shows a parabolic variation with a minimum value at ϕ = 1.1. Reaction pathway diagram interprets the major oxidation paths followed by reactants for higher carbon-consumption with varying H2 fraction. The P2 pathway involving ethane breakdown plays a major role in enhancing the burning velocity at rich mixture conditions.

Investigation on the Role of Pd, Pt, Rh in Methane Abatement for Heavy Duty Applications

Methane abatement remains a challenge in aftertreatment systems of natural gas engines, currently under discussion in combination with synthetic methane. In this study, Pt/Rh and Pd/Rh-based three-way catalysts are investigated under various transient conditions because transients between O2 excess (lean) and O2-poor (rich) conditions can significantly enhance methane abatement. At mid to high temperatures, transitions from rich to lean feed yield higher rates of methane direct oxidation under lean conditions with the Pt/Rh catalyst, compared to the Pd/Rh catalyst. Both catalysts are able to trigger methane steam reforming (SR) after transitions from lean to rich feed. The SR reaction leads to increased H2 and NH3 formation. However, SR deactivates much faster in the Pt/Rh catalyst. At low temperature, the Pt/Rh catalyst is more active for SR. Results from an additional Pd-only catalyst confirm that Rh is essential for NOx conversion and high N2 selectivity. The distinct characteristics of Pt, Pd and Rh demonstrate the benefits obtained from the combination of the three platinum group metals. The potential of the Pt/Pd/Rh catalyst is proved to be significant throughout the complete engine map. Under optimized lean/rich oscillatory conditions, the Pt/Pd/Rh catalyst yields more than 95% methane conversion under almost all conditions while maintaining efficient abatement of all other pollutants.

An Analysis of Emissions from An Ethanol Flex-Fuel Vehicle under Two Distinct Driving Cycle Tests during Cold Start

Ethanol flex-fuel vehicles are introduced to Thailand’s market and believed that they provide an alternative way in terms of reducing crude oil and octane booster import. Many literatures suggested that they also helped to reduce some emission species including the greenhouse gas. However, sufficient proof of this flex-fuel vehicle comparing the conventional versus realistic driving cycle tests during cold starts is not clearly identified. This research focuses on the comparison of performance, fuel consumption, and emissions of a flex-fuel vehicle using Gasohol E10, E50, and E85 tested under the New European Driving Cycle (NEDC) and Bangkok Driving Cycle (BDC). Tests were done on a Chassis Dynamometer in the Automotive Emission Laboratory of the Pollution Control Department. Considering emission data from both test cycles, the more ethanol ratios in gasoline, the more CO, NMHC, NOx, CO2 and PN emissions reductions. On the contrary, HC emissions are increased but still under EURO4 standards. Fuel consumptions on E85 are increased around 30% compared to E10 for both test cycles. However, the pattern of driving cycles significantly impacts the amounts of CO/NOx emissions and fuel consumption. During cold start periods, regardless of percentages of ethanol blends, the amounts of HC and CO emissions for both test cycles are similar due to running engine in rich conditions by ECU management to warm three-way catalyst. On the contrary, NOx emissions are strongly related to frequent acceleration and deceleration sequences of the tested driving cycle.

On the diversity of fossil and alternative gasoline combustion chemistry: A comparative flow reactor study

Recent progress in molecular combustion chemistry allows for detailed investigation of the intermediate species pool even for complex chemical fuel compositions, as occur for technical fuels. This study provides detailed investigation of a comprehensive set of complex alternative gasoline fuels obtained from laminar flow reactors equipped with molecular-beam sampling techniques for observation of the combustion intermediate species pool in homogeneous gas phase reactions. The combination of ionization techniques including double-imaging photoelectron photoion coincidence (i2PEPICO) spectroscopy enables deeper mechanistic insights into the underlying reaction network relevant to technical fuels. The selected fuels focus on contemporary automotive engine application as drop-in fuels compliant to European EN 228 specification for gasoline. Therefore, potential alternative gasoline blends containing oxygenated hydrocarbons as octane improvers obtainable from bio-technological production routes, e.g., ethanol, iso-butanol, methyl tert‑butyl ether (MTBE), and ethyl tert‑butyl ether (ETBE), as well as a Fischer-Tropsch surrogate were investigated. The fuel set is completed by two synthetic naphtha fractions obtained from Fischer-Tropsch and methanol-to-gasoline processes alongside with a fossil reference gasoline. In total, speciation data for 11 technical fuels from two atmospheric flow reactor setups are presented. Detailed main and intermediate species profiles are provided for slightly rich (ϕ = 1.2) and lean (ϕ = 0.8) conditions for intermediate to high temperatures. Complementary, the isomer distribution on different mass channels, like m/z = 78 u fulvene/benzene, of four gasolines was investigated. Experimental findings are analyzed in terms of the detailed fuel composition and literature findings for molecular combustion chemistry. Influences of oxygenated fuel components as well as composition of the hydrocarbon fractions are examined with a particular focus on the soot precursor chemistry. This dataset is available for validation of chemical kinetic mechanisms for realistic gasolines containing oxygenated hydrocarbons.

A Polynomial-Time Construction of a Hitting Set for Read-Once Branching Programs of Width 3

Recently, an interest in constructing pseudorandom or hitting set generators for restricted branching programs has increased, which is motivated by the fundamental issue of derandomizing space-bounded computations. Such constructions have been known only in the case of width 2 and in very restricted cases of bounded width. In this paper, we characterize the hitting sets for read-once branching programs of width 3 by a so-called richness condition. Namely, we show that such sets hit the class of read-once conjunctions of DNF and CNF (i.e. the weak richness). Moreover, we prove that any rich set extended with all strings within Hamming distance of 3 is a hitting set for read-once branching programs of width 3. Then, we show that any almost O(log n)-wise independent set satisfies the richness condition. By using such a set due to Alon et al. (1992) our result provides an explicit polynomial-time construction of a hitting set for read-once branching programs of width 3 with acceptance probability ɛ > 5/6. We announced this result at conferences more than ten years ago, including only proof sketches, which motivated a number of subsequent results on pseudorandom generators for restricted read-once branching programs. This paper contains our original detailed proof that has not been published yet.

Combustion characteristics of skeleton polymer reinforced paraffin-wax fuel grain for applications in hybrid rocket motors

Paraffin-based fuel is a promising and low-cost alternative for hybrid rocket motor applications due to its advantage of high regression rate. Meanwhile, paraffin fuel alone has poor mechanical strength that cannot meet the requirements in practical applications. Embedding skeleton polymer into paraffin-wax fuel can effectively enhance the mechanical properties and keep the advantage of high regression rate. In this paper, the mechanical and combustion characteristics of different polymer materials were comprehensively evaluated by using SEM, TG, TDG, mechanical test and flame propagation speed measurement experiments. A type of polymer reinforced paraffin-wax fuel grain has been fabricated and tested using a newly-designed optically accessible solid fuel tubular combustor. Combustion efficiency of the polymer reinforced paraffin fuel grain was further measured using a lab-scaled hybrid rocket motor. As a result, ABS is a better candidate that can be used in polymer reinforced paraffin fuel grain in terms of favorable combustion and mechanical properties. The flame propagation speed of polymers printed by SLS technique are much higher than those printed by SLA technique due to its rougher surface. Moreover, Paraffin liquid droplets and columns were clearly observed during the combustion process of the new proposed polymer reinforced paraffin fuel due to the entrainment and shearing of oxidizer flow, leading to higher regression rate and better mixing efficiency, which turns in higher combustion efficiency in fuel rich conditions compared with literature results.

Morpho-physiological adaptations of Leptocylindrus aporus and L. hargravesii to phosphate limitation in the northern Adriatic

The northern Adriatic is highly productive and shallow area characterized by numerous spatio-temporal gradients (e.g. nutrients, salinity, temperature). It is strongly influenced by numerous freshwater inputs, mainly from Po river. Its current systems as well as Po river, generates gradients of phosphate availability with an expressed N/P imbalance and phosphate limitation. A number of recent studies characterized these gradients as major factors affecting abundance and composition of microphytoplankton communities. Focus of this study is on two Leptocylindrus species, Leptocylindrus aporus (F.W. French & Hargraves) D. Nanjappa & A. Zingone 2013 and Leptocylindrus hargravesii D. Nanjappa & A. Zingone 2013. Species belonging to Leptocylindrus genus are frequently observed and have high abundances and also high contributions to the microphytoplankton community in this area. We focused on their morphological and physiological responses to phosphate limitation in situ and also performed in vitro experiments. In this study we report data on species specific growth rates under phosphorus (P) deplete and P rich conditions, localization and characteristics of alkaline phosphate activity, phosphate uptake rates as well as their morphological differences in P deplete versus P rich conditions. Our in vitro experiments showed that both Leptocylindrus species morphologically reacted similarly to phosphorus depletion and showed significantly elongated pervalvar axis in P depleted conditions if compared to P rich conditions. Also average chain lengths increased when in P depleted conditions. Two previously mentioned adaptations indicate their tendency to increase cellular surface areas available for alkaline phosphatase. Chlorophyll fluorescence of both species significantly decreased in P depleted medium. Although both species morphologically reacted similarly, our experiment demonstrated significant differences in physiological reactions to P depleted conditions.

Quantitative determination of nickel speciation for the presence of free oxide in commercial fluid catalytic cracking catalysts

Motivated by the potential over-catalysis and hazardousness of free nickel oxide (NiO) in the equilibrated catalysts (Ecats) collected from fluid catalytic cracking (FCC) refineries, this study aims to establish a simple bulk method, namely chemical leaching method to rapidly quantify the NiO content within thirteen commercial Ecats collected from different units. The synchrotron-–based, X–ray absorption near–edge structure (XANES) was performed to assess the validity of this method, as well as to examine the coordination structure of Ni by the extended X–ray absorption fine structure (EXAFS) analysis. Additionally, thermodynamics calculation was attempted to validate the affiliation of Ni with other metal oxides. The optimum leaching condition was validated as 60 °C in 60 min using 1 M sulfuric acid. Accordingly, the NiO was determined to reach 70–439 ppm in all Ecats, which warrants a non–hazardousness of these samples. Additionally, for the Ecats with a remarkably higher Ni content, the XANES results are biased by the enrichment of NiO on the catalyst surface. The majority of Ni was found to affiliate with Al in the form of aluminate, with the remaining 11%–15% Ni passivated effectively by lanthanum (La). The oxygen–rich regeneration condition could be beneficial for promoting the affiliation of Ni by La.

Recent Advances in the Siderophore Biology of Shewanella.

Despite the abundance of iron in nature, iron acquisition is a challenge for life in general because the element mostly exists in the extremely insoluble ferric (Fe3+) form in oxic environments. To overcome this, microbes have evolved multiple iron uptake strategies, a common one of which is through the secretion of siderophores, which are iron-chelating metabolites generated endogenously. Siderophore-mediated iron transport, a standby when default iron transport routes are abolished under iron rich conditions, is essential under iron starvation conditions. While there has been a wealth of knowledge about the molecular basis of siderophore synthesis, uptake and regulation in model bacteria, we still know surprisingly little about siderophore biology in diverse environmental microbes. Shewanella represent a group of γ-proteobacteria capable of respiring a variety of organic and inorganic substrates, including iron ores. This respiratory process relies on a large number of iron proteins, c-type cytochromes in particular. Thus, iron plays an essential and special role in physiology of Shewanella. In addition, these bacteria use a single siderophore biosynthetic system to produce an array of macrocyclic dihydroxamate siderophores, some of which show particular biological activities. In this review, we first outline current understanding of siderophore synthesis, uptake and regulation in model bacteria, and subsequently discuss the siderophore biology in Shewanella.

A cell design for correlative hard X-ray nanoprobe and electron microscopy studies of catalysts under in situ conditions.

To improve the understanding of catalysts, and ultimately the ability to design better materials, it is crucial to study them during their catalytic active states. Using in situ or operando conditions allows insights into structure-property relationships, which might not be observable by ex situ characterization. Spatially resolved X-ray fluorescence, X-ray diffraction and X-ray absorption near-edge spectroscopy are powerful tools to determine structural and electronic properties, and the spatial resolutions now achievable at hard X-ray nanoprobe beamlines make them an ideal complement to high-resolution transmission electron microscopy studies in a multi-length-scale analysis approach. The development of a system to enable the use of a commercially available gas-cell chip assembly within an X-ray nanoprobe beamline is reported here. The novel in situ capability is demonstrated by an investigation of the redox behaviour of supported Pt nanoparticles on ceria under typical lean and rich diesel-exhaust conditions; however, the system has broader application to a wide range of solid-gas reactions. In addition the setup allows complimentary insitu transmission electron microscopy and X-ray nanoprobe studies under identical conditions, with the major advantage compared with other systems that the exact same cell can be used and easily transferred between instruments. This offers the exciting possibility of studying the same particles under identical conditions (gas flow, pressure, temperature) using multiple techniques.

Climatic resources mediate the shape and strength of grassland productivity-richness relationships from local to regional scales

The plant productivity and species richness (P-SR) relationship has been a central topic in ecology for decades. It is increasingly recognized that climate resources (CR, temperature and precipitation) might affect the P-SR relationship as (1) the response of plant productivity and species richness to CR are different; (2) plant-plant interactions change along the CR gradient. However, little is known about how these effects mediate the shape and strength of the P-SR relationship from local-site to regional scales. Here, we proposed a cross-scale framework to disentangle the climatic control over the P-SR relationship in grasslands using the HerbDivNet dataset, which covers 28 natural grasslands in 19 countries and 6 continents with wide precipitation and temperature gradients. Our results showed that, at the local-site scale, a humped-back P-SR relationship is common at sites under poor and rich CR conditions, whereas both the shape and strength of the P-SR relationship strongly vary among sites under moderate CR condition. However, at the regional scale, the humped-back P-SR relationship is only observed under poor CR condition. We suggested that the asynchronous responses of productivity and species richness to increasing CR is an abiotic driver of the inconsistent P-SR relationships along the climatic gradient in addition to the changing plant-plant interactions suggested by the stress-gradient hypothesis. These findings help to reconcile the long-standing debate over the P-SR relationship and highlight the importance of CR conditions in developing or comparing grassland ecosystem theories and management at small scales.

Ethanol spray tubular flame established in a swirling air flow

This study proposes an efficient technique to burn ethanol spray in an intense swirling air flow and investigates the mechanism of flame lift-off. On the basis of typical tubular burners for gaseous fuels, ethanol spray was axially induced and mixed with the tangentially injected air under room temperature, yielding the ethanol spray tubular flames under various operating conditions. The results show that from an ultra-lean condition of global equivalence ratio of 0.1 to the rich condition, two typical flames, namely attached and lifted tubular flames, were established. Then, the structure of the ethanol spray tubular flame was specified by temperature measurements, OH-PLIF imaging, indicating its overwhelming aerodynamic and thermal stability with low pollutant emissions. Meanwhile, a flue gas analyzer was used to characterize the gas composition in the hot exhaust. It is found that the burner can achieve very low emissions of both CO and NOx, illustrating high combustion completeness under both attached and lifted flame conditions. To give a better understanding and make fully utilization of spray tubular flames, a parametric study was carried out to investigate the effects of the tangentially swirling air flow, the flow rate and oxygen concentration of atomizing gas, and the flow rate of liquid ethanol. Generally, an attached flame is lifted under a higher tangential velocity of air flow; increasing oxygen concentration of the atomizing gas flow leads to the height decrease of the flame lift-off, even the reattachment of the lifted flame; by raising the ethanol flow rate to exceed a critical value, the flame also lifts off. Furthermore, the evaporation time of droplets, residence time and chemical reaction time were calculated to quantify the flame lift-off behavior. The lifted flame can be established only when the evaporation time is larger than both the reaction time and the residence time.

Bacterial filamentation as a mechanism for cell-to-cell spread within an animal host

Intracellular pathogens are challenged with limited space and resources while replicating in a single host cell. Mechanisms for direct invasion of neighboring host cells have been discovered in cell culture, but we lack an understanding of how bacteria directly spread between host cells in vivo. Here, we describe the discovery of intracellular bacteria that use filamentation for spreading between the intestinal epithelial cells of a natural host, the rhabditid nematode Oscheius tipulae. The bacteria, which belong to the new species Bordetella atropi, can infect the nematodes following a fecal-oral route, and reduce host life span and fecundity. Filamentation requires UDP-glucose biosynthesis and sensing, a highly conserved pathway that is used by other bacteria to detect rich conditions and inhibit cell division. Our results indicate that B. atropi uses a pathway that normally regulates bacterial cell size to trigger filamentation inside host cells, thus facilitating cell-to-cell dissemination.

PM2.5 and water-soluble inorganic ion concentrations decreased faster in urban than rural areas in China

We investigated variations of PM2.5 and water-soluble inorganic ions chemical characteristics at nine urban and rural sites in China using ground-based observations. From 2015 to 2019, mean PM2.5 concentration across all sites decreased by 41.9 µg/m3 with a decline of 46% at urban sites and 28% at rural sites, where secondary inorganic aerosol (SIAs) contributed to 21% (urban sites) and 17% (rural sites) of the decreased PM2.5. SIAs concentrations underwent a decline at urban locations, while sulfate (SO42–), nitrate (NO3–), and ammonium (NH4+) decreased by 49.5%, 31.3% and 31.6%, respectively. However, only SO42– decreased at rural sites, NO3– increased by 21% and NH4+ decreased slightly. Those changes contributed to an overall SIAs increase in 2019. Higher molar ratios of NO3– to SO42– and NH4+ to SO42– were observed at urban sites than rural sites, being highest in the heavily polluted days. Mean molar ratios of NH3/NHx were higher in 2019 than 2015 at both urban and rural sites, implying increasing NHx remained as free NH3. Our observations indicated a slower transition from sulfate-driven to nitrate-driven aerosol pollution and less efficient control of NOx than SO2 related aerosol formation in rural regions than urban regions. Moreover, the common factor at urban and rural sites appears to be a combination of lower SO42– levels and an increasing fraction of NO3– to PM2.5 under NH4+-rich conditions. Our findings imply that synchronous reduction in NOx and NH3 emissions especially rural areas would be effective to mitigate NO3–-driven aerosol pollution.

Experimental investigation of heat transfer characteristics of an inverse diffusion flame in a coaxial tube burner for with and without swirl

Heat transfer by flame jet impingement is widely used in many of the industrial and domestic applications like heating metal bars, scrap melting, shaping the glass, metal slab cutting, domestic cooking and others. Aim of the present experimental work is to study an effect of swirl on a local heat flux distribution of an inverse diffusion flame (IDF) jet impinging on a flat target surface in a coaxial tube burner. The twisted tape of twist ratio 3 (corresponding to the swirl number, S = 0.52) is used to create a swirl in the central air jet of the burner. The flame shapes and heat flux distributions are compared for the with and without swirling IDF under the different air jet Reynolds number (Rea) of 1000 to 2500, equivalence ratio (ϕ) of 0.4 to 1.3 and a burner-to-impingement plate distance (H) of 10 to 100mm. The distributions of heat fluxes are studied within a radius of 75 mm from the point of stagnation on an impingement plate. Results show that the swirling IDF helps in clean combustion of the fuel with much shorter flame height. Swirling in the flame jet enhances the peak heat flux for the higher air jet Reynolds number for slightly fuel rich conditions of ϕ = 1.1 at the optimal burner-to-target plate distance of 40 mm.