Reversible Reduction Research Articles

Innovative Strategy for Developing PEDOT Composite Scaffold for Reversible Oxygen Reduction Reaction.

Metal-air batteries are an emerging technology with great potential to satisfy the demand for energy in high-consumption applications. However, this technology is still in an early stage, facing significant challenges such as a low cycle life that currently limits its practical use. Poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer has already demonstrated its efficiency as catalyst for oxygen reduction reaction (ORR) discharge as an alternative to traditional expensive and nonsustainable metal catalysts. Apart from that, in most electrochemical processes, three phenomena are needed: redox activity and electronic and ionic conduction. Material morphology is important to maximize the contact area and optimize the 3 mechanisms to obtain high-performance devices. In this work, porous scaffolds of PEDOT-organic ionic plastic crystal (OIPC) are prepared through vapor phase polymerization to be used as porous self-standing cathodes. The scaffolds, based on abundant elements, showed good thermal stability (200 °C), with potential ORR reversible electrocatalytic activity: 60% of Coulombic efficiency in aqueous medium after 200 cycles.

Multivalent-Ion versus Proton Insertion into Nanostructured Electrochromic WO3 from Mild Aqueous Electrolytes.

Mild aqueous electrolytes containing multivalent metal salts are currently scrutinized for the development of ecosustainable energy-related devices. However, the role of soluble multivalent metal ions in the electrochemical reactivity of transition metal oxides is a matter of debate, especially when they are performed in protic aqueous electrolytes. Here, we have compared, by means of (spectro)electrochemistry, the reversible electrochromic reduction of transparent nanostructured γ-WO3 thin films in mild aqueous electrolytes of various chemical composition and pH. This study reveals that reversible proton insertion is the only charge storage mechanism over a large pH range and that it is effective for aqueous electrolytes prepared from either organic (such as acetic acid) or inorganic (such as solvated multivalent cations) Bro̷nsted acids. By refuting charge storage mechanisms relying on the reversible insertion of multivalent metal ions, notably in aqueous electrolytes based on Al3+ ions or a mixture of Al3+ and Zn2+ ions, these fundamental results pave the way for the rational development of electrolytes and active materials for a range of aqueous-based devices, such as the emerging concept of an energy-saving smart window, which we also address in this study.

Luminescent Pt(II) Complexes Using Unsymmetrical Bis(2-pyridylimino)isoindolate Analogues.

A series of ligands based upon a 1,3-diimino-isoindoline framework have been synthesized and investigated as pincer-type (N∧N∧N) chelates for Pt(II). The synthetic route allows different combinations of heterocyclic moieties (including pyridyl, thiazole, and isoquinoline) to yield new unsymmetrical ligands. Pt(L1-6)Cl complexes were obtained and characterized using a range of spectroscopic and analytical techniques: 1H and 13C NMR, IR, UV-vis and luminescence spectroscopies, elemental analyses, high-resolution mass spectrometry, electrochemistry, and one example via X-ray crystallography which showed a distorted square planar environment at Pt(II). Cyclic voltammetry on the complexes showed one irreversible oxidation between +0.75 and +1 V (attributed to Pt2+/3+ couple) and a number of ligand-based reductions; in four complexes, two fully reversible reductions were noted between -1.4 and -1.9 V. Photophysical studies showed that Pt(L1-6)Cl absorbs efficiently in the visible region through a combination of ligand-based bands and metal-to-ligand charge-transfer features at 400-550 nm, with assignments supported by DFT calculations. Excitation at 500 nm led to luminescence (studied in both solutions and solid state) in all cases with different combinations of the heterocyclic donors providing tuning of the emission wavelength around 550-678 nm.

Perylene-Based columnar liquid Crystal: Revealing resistive switching for nonvolatile memory devices

Perylene-based columnar liquid crystal (LC) devices exhibit resistive switching (RS), clearly identified on cyclic J-V curve hysteresis, stable for several cycles. Trap-controlled SCLC conduction is responsible for the charge transport in the active layer, where the “set” and “reset” processes occur. The incorporation of ZnO@SiO2 quantum dots significantly enhances the RS response. The distinguishing result presented here is the ability to write-read-erase-read, controlling the “on” and “off” states by applying an external electric field, which allows to store and read information multiple times. An endurance of nearly one order of magnitude between the low and high RS states was determined over 50 consecutive cycles. The device proved to be resilient, preserving the resistive switching effect and memory capacity even after one year maintained at room temperature and ambient atmosphere. DFT calculations indicate a conduction mechanism based on reversible reductions of the perylene LC molecules. This article highlights the ability of LCs to store and process information via their resistivity, with potential for low-cost production and large-area nonvolatile printed organic memories.

Strategically constructed AlGaN doping barriers for efficient deep ultraviolet light-emitting diodes.

Here, we propose a sandwich-like Si-doping scheme (undoped/Si-doped/undoped) in Al0.6Ga0.4N quantum barriers (QBs) to simultaneously promote the optoelectronic performances and reliability of deep ultraviolet light-emitting diodes (DUV-LEDs). Through experimental and numerical analyses, in the case of DUV-LEDs with conventional uniform Si-doping QB structure, severe operation-induced reliability degradation, including the increase of reverse leakage current (IR) and reduction of light output power (LOP), will offset the enhancement of optoelectronic performances as the Si-doping levels increase to an extent, which hinders further development of DUV-LEDs. According to a transmission electron microscope characterization and a numerical simulation, an improved interfacial quality in multiple quantum wells (MQWs) and more uniform carrier distribution within MQWs are demonstrated for our proposed Si-doping structure in comparison to the uniform Si-doping structure. Consequently, the proposed DUV-LED shows superior wall-plug efficiency (4%), IR at -6 V reduced by almost one order of magnitude, and slower LOP degradation after 168-h 100 mA-current-stress operation. This feasible doping scheme provides a promising strategy for the high-efficiency and cost-competitive DUV-LEDs.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt-Polypyridine Diamine Complexes.

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt-polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)-CO22-]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon-oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)-CO22-]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)-CO]+, which ultimately releases CO.

Cyclic (Alkyl)(Amino)Carbene-Iminoboryl Compounds with Three Formal Oxidation States.

BN/CC isosterism is an effective strategy to build hybrid functional molecules with unique properties. In contrast to the alkynyl iminium salts derived from cyclic (alkyl)(amino)carbenes (CAACs) that feature only one reversible reduction wave, the isoelectronic cationic CAAC-iminoboryl adducts could be singly and doubly reduced smoothly. Both the resultant neutral radical and anionic azaborataallenes bear NBC-mixed allenic structures. The former radical has a high spin-density of 0.55e at CCAAC carbon, yet exhibits formal boron-centered radical reactivity. The latter azaborataallenes feature the nucleophilic CCAAC center and polar N(δ-)═B(δ+)═C(δ-) unit, and readily undergo nucleophilic substitution, isocyanide insertion, dipolar addition and cycloaddition reactions etc. The N-substituents have been shown to have a significant influence on the solid-state structure, thermal stability, and reactivity of azaborataallenes. This work showcases the allenic BN-unsaturated species as versatile building blocks in organic synthesis.

RedOx regulation of LRRK2 kinase activity by active site cysteines

Mutations of the human leucine-rich repeat kinase 2 (LRRK2) have been associated with both, idiopathic and familial Parkinson’s disease (PD). Most of these pathogenic mutations are located in the kinase domain (KD) or GTPase domain of LRRK2. In this study we describe a mechanism in which protein kinase activity can be modulated by reversible oxidation or reduction, involving a unique pair of adjacent cysteines, the “CC” motif. Among all human protein kinases, only LRRK2 contains this “CC” motif (C2024 and C2025) in the Activation Segment (AS) of the kinase domain. In an approach combining site-directed mutagenesis, biochemical analyses, cell-based assays, and Gaussian accelerated Molecular Dynamics (GaMD) simulations we could attribute a role for each of those cysteines. We employed reducing and oxidizing agents with potential clinical relevance to investigate effects on kinase activity and microtubule docking. We find that each cysteine gives a distinct contribution: the first cysteine, C2024, is essential for LRRK2 protein kinase activity, while the adjacent cysteine, C2025, contributes significantly to redox sensitivity. Implementing thiolates (R-S-) in GaMD simulations allowed us to analyse how each of the cysteines in the “CC” motif interacts with its surrounding residues depending on its oxidation state. From our studies we conclude that oxidizing agents can downregulate kinase activity of hyperactive LRRK2 PD mutations and may provide promising tools for therapeutic strategies.

IZCp and PZCp: Redox Non-innocent Cyclopentadienyl Ligands as Electron Reservoirs for Sandwich Complexes.

A long-sustained effort of systematic steric and electronic modification of cyclopentadienyl (Cp) ligands has enabled them to find wide-ranging, valuable applications. Herein, we present two novel Cp ligands: imidazolium- and pyrrolinium-substituted zwitterionic Cps (IZCp and PZCp), whose key utility is redox non-innocence─the ability to participate cooperatively with the metal center in redox reactions. Through the simple metalation of ZCps, the Cr(0) and Mo(0) half-sandwich complexes (IZCp)Cr(CO)3, (PZCp)Cr(CO)3, (IZCp)Mo(CO)3, and (PZCp)Mo(CO)3, respectively, as well as the Ru(II) sandwich complexes [(IZCp)RuCp]PF6 and [(PZCp)RuCp]PF6 were prepared. The sandwich complexes were fully characterized and showed by cyclic voltammetry reversible one-electron reduction at E1/2 potentials ranging from -1.7 to -2.7 V vs Fc/Fc+. These values are unusually low and have not been observed with other Cp ligands due to the instability of the reduced complexes. Density functional theory (DFT) calculations for the reduced sandwich derivatives with IZCp and PZCp showed their spin densities to be highly delocalized over their ZCp ligand moieties (70-90%). Electron paramagnetic resonance (EPR) analysis of the isolated K[(PZCp)Mo(CO)3] and (PZCp)RuCp also indicated a high degree of ligand-localized radical character. Thus, the IZCp and PZCp ligands act as electron reservoirs to sustain these sandwich complexes in highly reduced states. At the same time, the CO stretching frequencies of K[(PZCp)Mo(CO)3]: νCO 1871, 1748, and 1699 cm-1, rank the [PZCp]- ligand as the strongest electron-donating Cp ligand among the reported CpMo(CO)3 derivatives, whose νCO > 1746 cm-1. In addition, these redox non-innocent Cps were obtained in high yields and found to be practically air- and moisture-stable, unlike typical Cps.

From Neutral Diarsenes to Diarsene Radical Ions and Diarsene Dications.

Diarsene [L(MeO)GaAs]2 (L=HC[C(Me)N(Ar)]2, Ar=2,6-iPr2C6H3, 4) reacts with MeOTf and MeNHC (MeNHC=1,3,4,5-tetra-methylimidazol-2-ylidene) to the diarsene [L(TfO)GaAs]2 (5) and the carbene-coordinated diarsene [L(MeO)GaAsAs(MeNHC)Ga(OMe)L] (6). The NHC-coordination results in an inversion of the redox properties of the diarsene 4, which shows only a reversible reduction event at E1/2=-2.06 V vs Fc0/+1, whereas the carbene-coordinated diarsene 6 shows a reversible oxidation event at E1/2=-1.31 V vs Fc0/+1. Single electron transfer reactions of 4 and 6 yielded [K[2.2.2.]cryp][L(MeO)GaAs]2 (8) and [L(MeO)GaAsAs(MeNHC)-Ga(OMe)L][B(C6F5)4] (9) containing the radical anion [L(MeO)GaAs]2⋅- (8⋅-) and the NHC-coordinated radical cation [L(MeO)GaAsAs(MeNHC)Ga(OMe)L]⋅+ (9⋅+), respectively, while the salt-elimination reaction of the triflate-coordinated diarsene 5 with Na[B(C6F5)4] gave [LGaAs]2[B(C6F5)4]2 (11) containing the dication [LGaAs]2 2+ (112+). Compounds 1-11 were characterized by 1H and 13C NMR, EPR (8, 9), IR, and UV-Vis spectroscopy and by single crystal X-ray diffraction (sc-XRD). DFT calculations provided a detailed understanding of the electronic nature of the diarsenes (4, 6) and the radical ions (8⋅-, 9⋅+), respectively.

Ozanimod-mediated remission in experimental autoimmune encephalomyelitis is associated with enhanced activity of CNS CD27low/- NK cell subset.

Ozanimod (RPC1063) is an immunomodulator that has been recently approved by the FDA (2020) for the treatment of relapsing-remitting multiple sclerosis (RRMS). It is a selective agonist of the sphingosine-1-phophate receptors 1 and 5, expressed on naïve and central memory T and B cells, as well as natural killer (NK) cells, and is involved in lymphocyte trafficking. Oral administration of ozanimod was reported to result in rapid and reversible reduction in circulating lymphocytes in multiple sclerosis (MS) patients, however, only minimal effect on NK cells was observed. In this study, we sought to investigate the effect of ozanimod on NK cells and assess whether they play any role in ozanimod-induced remission in experimental autoimmune encephalomyelitis (EAE), the animal model of MS. Active EAE induction was done in C57BL/6 female mice, followed by daily oral treatment with ozanimod (0.6mg/kg) starting at disease onset (score 1). Flow cytometry of blood and CNS was performed 24 hours after the last oral dose of ozanimod treatment in diseased mice. Histological analysis of lumbar spinal cord was performed for evaluating the level of inflammation and demyelination. Depletion of peripheral NK cells was done using anti-NK1.1 mouse antibody (mAb) at day 5 post-EAE induction. Ozanimod was effective in reducing the clinical severity of EAE and reducing the percentage of autoreactive CD4+ and CD8+ T cells along with significant inhibition of lymphocyte infiltration into the spinal cord, accompanied by reversed demyelination. Furthermore, ozanimod treatment resulted in a significant increase in the frequency of total NK cells in the blood and CNS along with upregulation of the activating receptor NKG2D on CD27low/- NK cell subset in the CNS. The effectiveness of ozanimod treatment in inhibiting the progression of the disease was reduced when NK cells were depleted using anti-NK1.1 mAb. The current study demonstrated that ozanimod treatment significantly improved clinical symptoms in EAE mice. Ozanimod and anti-NK1.1 mAb appear to function in opposition to one another. Collectively, our data suggest that ozanimod-mediated remission is associated with an increased percentage of total NK cells and CD27low/- NK cells expressing the activating receptor, NKG2D in the CNS.

Immune metabolic mechanisms of acupuncture in improving glycolipid metabolic disorders explored through pancreatic adipose tissue.

Pancreatic adipose tissue serves as a crucial structural basis for the development of glycolipid metabolic disorders. Understanding the mechanisms underlying pancreatic adipose tissue infiltration and regulatory strategies is essential for early intervention in glycolipid metabolic disorders. Pancreatic adipose tissue functions as a significant medium linking systemic immune metabolism, while the pancreatic vascular system emerges as a novel target for sensing pancreatic immune responses and maintaining the body's energy homeostasis, collectively participating in the development of glycolipid metabolic disorders. Acupuncture possesses potential effects in modulating the interaction between resident macrophages and adipocytes in the pancreas, leading to the reversible reduction of excessive pancreatic adipose accumulation, with its action being vascular-dependent.

Boron Complexes of Tridentate Acyl Pyridylhydrazones

AbstractSince the development of the chemistry and applications of boron dipyrromethene dyes (BODIPYs), numerous other platforms based on boron complexes of N‐donor ligands have emerged as molecular optoelectronic materials. By tailoring the structure of the ligand bound to boron, the optical and electronic properties of a compound can be precisely tuned for unique properties, such as aggregation‐induced emission (AIE) in the case of boron difluoride hydrazones (BODIHYs). We examine the impact of modifying the typical bidentate hydrazone ligand structure used to prepare BODIHYs to enable a tridentate coordination mode to produce boron complexes of tridentate acyl pyridylhydrazones. This change allows for the use of arylboronic acids as sources of boron and facilitates the inclusion of complex organic components at the boron centre, including the formation of dye‐dye conjugates. The synthesized compounds exhibit distinct optical and electronic properties when compared to BODIHYs, such as reversible electrochemical reduction and up to a >300 nm pseudo‐Stokes shift in the solid state, all of which were supported by density functional theory calculations.

Impact of Temperature on the Chiroptical Properties of Thin Films of Chiral Thiophene-based Oligomers.

According to the theoretical model based on the Mueller matrix approach, the experimental electronic circular dichroism (ECD) for thin films of chiral organic dyes can be expressed as the sum of several contributions, two of which are the most significant: 1) an intrinsic component (CDiso) invariant upon sample orientation, reflecting the molecular and/or supramolecular chirality, due to 3D-chiral nanoscopic structures; 2) a non-reciprocal component (LDLB) which inverts its sign upon sample flipping, which arises from the interaction of linear dichroism and linear birefringence in locally anisotropic domains, expression of 2D-chiral micro/mesoscopic structures. In this work, we followed in parallel through ECD and differential scanning calorimetry (DSC) the temperature evolution of the supramolecular arrangements of thin films of five structurally related chiral thiophene-based oligomers with different LDLB/CDiso ratio. By increasing the temperature, regardless of phase transitions observed by DSC analysis, systems with strong CDiso revealed no changes in the ECD spectrum, while compounds with dominant LDLB contribution underwent a gradual (and reversible) reduction of (apparent) ECD signals. These findings demonstrated that the concomitant occurrence of intrinsic and non-reciprocal components in the ECD spectrum of thin films of chiral organic dyes is strictly correlated with solid-state organizations of different stability.

Powdered Cross-Linked Gelatin Methacryloyl as an Injectable Hydrogel for Adipose Tissue Engineering.

The tissue engineering field is currently advancing towards minimally invasive procedures to reconstruct soft tissue defects. In this regard, injectable hydrogels are viewed as excellent scaffold candidates to support and promote the growth of encapsulated cells. Cross-linked gelatin methacryloyl (GelMA) gels have received substantial attention due to their extracellular matrix-mimicking properties. In particular, GelMA microgels were recently identified as interesting scaffold materials since the pores in between the microgel particles allow good cell movement and nutrient diffusion. The current work reports on a novel microgel preparation procedure in which a bulk GelMA hydrogel is ground into powder particles. These particles can be easily transformed into a microgel by swelling them in a suitable solvent. The rheological properties of the microgel are independent of the particle size and remain stable at body temperature, with only a minor reversible reduction in elastic modulus correlated to the unfolding of physical cross-links at elevated temperatures. Salts reduce the elastic modulus of the microgel network due to a deswelling of the particles, in addition to triple helix denaturation. The microgels are suited for clinical use, as proven by their excellent cytocompatibility. The latter is confirmed by the superior proliferation of encapsulated adipose tissue-derived stem cells in the microgel compared to the bulk hydrogel. Moreover, microgels made from the smallest particles are easily injected through a 20G needle, allowing a minimally invasive delivery. Hence, the current work reveals that powdered cross-linked GelMA is an excellent candidate to serve as an injectable hydrogel for adipose tissue engineering.

Synthesis and Photophysical Evaluation of 3,3’‐Nitrogen Bis‐Substituted fac‐[Re(CO)3(Diimine)Br] Complexes

AbstractThe preparations, photophysical and electrochemical properties of a series of fac‐[Re(CO)3(diimine)Br] complexes are presented. The bipyridine (bpy) based diimine ligands feature symmetrical and asymmetrical 3,3’‐diamino‐2,2’‐bipyridine substitution patterns. Photophysical and electrochemical properties of these complexes are tunable, depending on their organic diimine framework. Introduction of a distal urea bridge via the 3,3’‐substitution pattern led to prolonged phosphorescence lifetimes without a significant change in absorbance and phosphorescence emission wavelengths. Reversible electrochemical bipyridine reduction remained largely unchanged by this derivatization.

Amorphous MnO2 Lamellae Encapsulated Covalent Triazine Polymer-Derived Multi-Heteroatoms-Doped Carbon for ORR/OER Bifunctional Electrocatalysis.

The intelligent construction of non-noble metal materials that exhibit reversible oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with bifunctional electrocatalytic performance is greatly coveted in the realm of zinc-air batteries (ZABs). Herein, a crafted structure-amorphous MnO2 lamellae encapsulated covalent triazine polymer-derived N, S, P co-doped carbon sphere (A-MnO2/NSPC) is designed using a self-doped pyrolysis coupled with an in situ encapsulation strategy. The customized A-MnO2/NSPC-2 demonstrates a superior bifunctional electrocatalytic performance, confirmed by a small ΔE index of 0.64V for ORR/OER. Experimental investigations, along with density functional theory calculations validate that predesigned amorphous MnO2 surface defects and abundant heteroatom catalytic active sites collectively enhance the oxygen electrocatalytic performance. Impressively, the A-MnO2/NSPC-based rechargeable liquid ZABs show a large open-circuit potential of 1.54V, an ultrahigh peak power density of 181mW cm-2, an enormous capacity of 816 mAh g-1, and a remarkable stability for more than 1720 discharging/charging cycles. Additionally, the assembled flexible all-solid-state ZABs also demonstrate outstanding cycle stability, surpassing 140 discharging/charging cycles. Therefore, this highly operable synthetic strategy offers substantial understanding in the development of magnificent bifunctional electrocatalysts for various sustainable energy conversions and beyond.

Redox potentials elucidate the electron transfer pathway of NAD+-dependent formate dehydrogenases

Metal-dependent, nicotine adenine dinucleotide (NAD+)-dependent formate dehydrogenases (FDHs) are complex metalloenzymes coupling biochemical transformations through intricate electron transfer pathways. Rhodobacter capsulatus FDH is a model enzyme for understanding coupled catalysis, in that reversible CO2 reduction and formate oxidation are linked to a flavin mononuclotide (FMN)-bound diaphorase module via seven iron-sulfur (FeS) clusters as a dimer of heterotetramers. Catalysis occurs at a bis-metal-binding pterin (Mo) binding two molybdopterin guanine dinucleotides (bis-MGD), a protein-based Cys residue and a participatory sulfido ligand. Insights regarding the proposed electron transfer mechanism between the bis-MGD and the FMN have been complicated by the discovery that an alternative pathway might occur via intersubunit electron transfer between two [4Fe4S] clusters within electron transfer distance. To clarify this difference, the redox potentials of the bis-MGD and the FeS clusters were determined via redox titration by EPR spectroscopy. Redox potentials for the bis-MGD cofactor and five of the seven FeS clusters could be assigned. Furthermore, substitution of the active site residue Lys295 with Ala resulted in altered enzyme kinetics, primarily due to a more negative redox potential of the A1 [4Fe4S] cluster. Finally, characterization of the monomeric FdsGBAD heterotetramer exhibited slightly decreased formate oxidation activity and similar iron-sulfur clusters reduced relative to the dimeric heterotetramer. Comparison of the measured redox potentials relative to structurally defined FeS clusters support a mechanism by which electron transfer occurs within a heterotetrameric unit, with the interfacial [4Fe4S] cluster serving as a structural component toward the integrity of the heterodimeric structure to drive efficient catalysis.

Understanding the Anomalous J–V Curves in Carbon‐Based Perovskite Solar Cells as a Structural Transition Induced by Ion Diffusion

The investigation of hole transport layer‐free mesoporous carbon perovskite solar cells by analyzing current–voltage (J–V) curves under different scan rates, light intensities, and temperatures is presented. A distinctive bump in the curves is identified, previously reported in the literature. The voltage at the inflection point of this transition shows a linear correlation with the scan rate, directly yielding a characteristic relaxation time. Increasing temperature demonstrates a reduction in the magnitude and characteristic time of the bump. It also indicates an activation energy of 0.8 eV, suggesting a diffusion mechanism. Importantly, the intensity of the illumination has no influence on the overall behavior, indicating that the phenomenon is not a photovoltaic processes. It is proposed that the bump originates from transition between a metastable state at high scan rates and a stable one reached after relaxation. To accurately replicate the measured J–V curves, a novel lumped circuit model is introduced and validated. A schematic microstructural model depicts the reversible reduction in photocurrent as a decline in charge transfer capacity caused by the diffusion of large ions at the mesoporous titanuim dioxyde interface. Ultimately, this study also suggests a plausible reason for the well‐known hysteresis commonly observed with perovskite solar cells.

Electrochemical, spectroelectrochemical, and electrochromic characterization of silicon(IV) phthalocyanine with axially ligated electropolymerizable 3,4-ethylenedioxythiophene moieties

Poly(3,4‐ethylenedioxythiophene) (PEDOT) is the most popular conducting polymer in the field of optoelectronics. In this study, the electrochemical and spectral properties of the silicon(IV) phthalocyanine (SiPc) and of a PEDOT were combined, and the electrochromic property was imparted to SiPc by modification of the axial positions of the Si4+ cation of SiPc with 3,4‐ethylenedioxythiophene (EDOT) groups. For this purpose, SiPc-EDOT was synthesized and characterized as to its electrochemistry and spectroelectrochemistry in nonaqueous media. Three reversible reduction couples at −0.51, −0.92, and −1.62 V and two oxidation processes at 1.16 and 1.73 V were observed for SiPc-EDOT in dichloromethane (DCM) containing tetrabutylammonium perchlorate (TBAP). In situ spectroelectrochemical analysis showed that the reductions and the first oxidation process of SiPc-EDOT were Pc-centered and the second oxidation process was EDOT-centered. The EDOT-based redox process at 1.73 V triggered the coating of SiPc-EDOT on the electrode surface as the SiPc-PEDOT film due to the electrooligomerization of the oxidative cationic form of EDOT groups during the repetitive voltammetric cycles. The electropolymerized SiPc-PEDOT film on the different electrode surfaces (ITO, GCE, ITO/Nf) yielded a conjugated polymer, which was characterized by cyclic voltammetry, UV–vis spectroelectrochemistry, Raman and FT-IR spectroscopies. The EDOT modification of SiPc supplied boost electrochromic performance in large percent transmittance change (Δ%T = 50 %), high coloration efficiency (η = 530 cm2 C−1), fast response times, and high cycle stability.